summaryrefslogtreecommitdiff
path: root/sound
AgeCommit message (Collapse)AuthorFilesLines
2010-08-05Merge branch 'topic/asoc' into for-linusTakashi Iwai104-626/+8717
2010-08-05Merge branch 'topic/hda' into for-linusTakashi Iwai12-147/+891
2010-08-04ALSA: hda - Add pin-fix for HP dc5750Takashi Iwai1-0/+29
The NID 0x11 on HP dc5750 with ALC260 should be a speaker although BIOS gives it as a line-out. This patch adds a quirk to fix the pin config so that the real line-out is used properly. Reference: bnc#624118 https://bugzilla.novell.com/show_bug.cgi?id=624118 Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-08-04ALSA: hda - Fix initial capsrc selection in patch_alc269()Takashi Iwai1-11/+16
In patch_alc269(), we initialize the primary capsrc so that the device works from the beginning. It issues CONNECT_SEL verb no matter which widget is although some widget (e.g. 0x23) has no connection selection but a mixer, which requires unmuting instead. This patch fixes the initialization of capsrc by re-using the code as a helper function. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-08-04ASoC: TWL4030: Capture route runtime DAPM ordering fixPeter Ujfalusi1-36/+12
Fix the ordering problem in DAPM domain, when the user changes between digital and analog sources during active capture (or loopback) scenario. Before this patch, when the user changed from analog source to digital there were a short time, when the codec enabled analog mic bias (2.2 volts) instead of the correct digital mic bias (1.8 volts) to the digital microphones. This behaviour caused by the former implementation of selecting the correct type of bias. This was done at the POST_REG event of the DAPM_MUX_E("TXx Capture Route") widget. By moving the bias type selection as DAPM_SUPPLY and connecting it to the corresponding digimic widget the problematic situation can be avoided. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-08-03ALSA: hda - Add PC-beep whitelist for an Intel boardTakashi Iwai1-0/+1
An Intel board needs a white-list entry to enable PC-beep. Otherwise the driver misdetects (due to bogus BIOS info) and ignores the PC-beep on 2.6.35. Reported-and-tested-by: Leandro Lucarella <luca@llucax.com.ar> Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-08-03ALSA: hda - More relax for pending period handlingTakashi Iwai1-1/+1
Since the pending periods are often bogus and take long time until actually processed, it often results in a high CPU usage of the hd-audio workq. Overall it's better to have low CPU consumption by avoiding a too tight loop rather than the wake-up timing accuracy. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-08-03ALSA: hda - Define AC_FMT_* constantsTakashi Iwai3-21/+50
Define constants for the HD-audio stream format bits, and replace the magic numbers in codes. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-08-03ALSA: hda - Fix beep frequency on IDT 92HD73xx and 92HD71Bxx codecsDaniel J Blueman1-1/+11
Fix HDA beep frequency on IDT 92HD73xx and 92HD71Bxx codecs. These codecs use the standard beep frequency calculation although the datasheet says it's linear frequency. Other IDT/STAC codecs might have the same problem. They should be fixed individually later. Signed-off-by: Daniel J Blueman <daniel.blueman@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-08-03ALSA: hda - Add support for HDMI HBR passthroughAnssi Hannula4-5/+44
Passing IEC 61937 encapsulated compressed audio at bitrates over 6.144 Mbps (i.e. more than a single 2-channel 16-bit 192kHz IEC 60958 link) over HDMI requires the use of HBR Audio Stream Packets instead of Audio Sample Packets. Enable HBR mode when the stream has 8 channels and the Non-PCM bit is set. If the audio converter is not connected to any HBR-capable pins, return -EINVAL in prepare(). Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-08-03ALSA: hda - Set Stream Type in Stream Format according to AES0Anssi Hannula3-3/+9
Set bit 15 (Stream Type) of HDA Stream Format to 1 (Non-PCM) when IEC958 channel status bit 1 (AES0 & 0x02) is set to 1 (non-audio). This is a prequisite for HDMI HBR passthrough. Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-08-03ALSA: hda - Fix Thinkpad X300 so SPDIF is not exposedJerone Young1-1/+6
Just as with the X301. The X300 does not have a way to do SPDIF either. It does not have a dock connector, nor does it have the SPDIF through the headphone jack. This patch fixes it so X300 does not show SPDIF, since it cannot do it. To add all Lenovo Thinkpads had different codec subsytem IDs: X300: http://launchpadlibrarian.net/34862838/Card0.Codecs.codec.0.txt Signed-off-by: Jerone Young <jerone.young@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-08-03ALSA: hda - FIX to not expose SPDIF on Thinkpad X301, since it does not have ↵Jerone Young1-0/+4
the ability to use SPDIF The Lenovo X301 does not have the ability to connect to a docking station to use the SPDIF port. It also does not have the ability to do SPDIF though the headphone jack or Display Port jacks. This patch fixes it so this is not exposed for the X301 and users do think it has the ability to do SPDIF. I tested both headphone & display port jacks and it is not there. I have tested this patch and it works great. Also to add the other Thinkpads have different subsystem codec IDs. Here are examples: X301: http://launchpadlibrarian.net/31561902/Card0.Codecs.codec.0.txt X200: http://launchpadlibrarian.net/49055036/Card0.Codecs.codec.0.txt W500: http://launchpadlibrarian.net/36276057/Card0.Codecs.codec.0.txt Signed-off-by: Jerone Young <jerone.young@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-08-03ASoC: wm9081: fix resource reclaim in wm9081_register error pathAxel Lin1-5/+6
This patch fixes the error path in wm9081_register to properly free resources. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-08-03ASoC: wm8978: fix a memory leak if a wm8978_register failAxel Lin1-3/+7
There is a memory leak found if wm8978_register() fail. This patch moves the buffer allocate and release at the same level to prevent the memory leak. Signed-off-by: Axel Lin <axel.lin@gmail.com> Reviewed-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-08-03ASoC: wm8974: fix a memory leak if another WM8974 is registeredAxel Lin1-1/+2
wm8974 is allocated in wm8974_i2c_probe() but is not freed if wm8974_register() return -EINVAL (if another WM8974 is registered). Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-08-03ASoC: wm8961: fix resource reclaim in wm8961_register error pathAxel Lin1-4/+5
This patch fixes the error path in wm8961_register to properly free resources. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-08-03ASoC: wm8955: fix resource reclaim in wm8955_register error pathAxel Lin1-4/+6
This patch fixes the error path in wm8955_register to properly free resources. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-08-03ASoC: wm8940: fix a memory leak if wm8940_register return errorAxel Lin1-1/+6
This patch adds checking for wm8940_register return value, and does kfree(wm8940) if wm8940_register() fail. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-08-03ASoC: wm8904: fix resource reclaim in wm8904_register error pathAxel Lin1-5/+8
This patch includes below fixes: 1. wm8904 need to be kfreed in wm8904_register() error path before return. 2. fix the error path for snd_soc_register_codec() fail and snd_soc_register_dai() fail to properly free resources. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-08-03ASoC: wm8711: fix a memory leak if another WM8711 is registeredAxel Lin1-1/+2
wm8711 is allocated in either wm8711_spi_probe() or wm8711_i2c_probe() but is not freed if wm8711_register() return -EINVAL(if another ad1836 is registered). Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-08-03ASoC: wm8523: fix resource reclaim in wm8523_register error pathAxel Lin1-4/+6
This patch includes below fixes: 1. If another WM8523 is registered, need to kfree wm8523 before return -EINVAL. 2. If snd_soc_register_codec failed, goto error path to properly free resources. 3. Instead of using mixed in-line and goto style cleanup, use goto style error handling if snd_soc_register_dai failed. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-08-03ASoC: da7210: fix a memory leak if failed to initialise da7210 audio codecAxel Lin1-2/+6
da7210 should be kfreed if da7210_init() return error. This patch also fixes the error handing in the case of snd_soc_register_dai() fail by adding snd_soc_unregister_codec() in error path. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-08-03ASoC: ak4642: fix a memory leak if failed to initialise AK4642Axel Lin1-1/+3
ak4642 should be kfreed if ak4642_init() return error. Signed-off-by: Axel Lin <axel.lin@gmail.com> Reviewed-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-08-03ASoC: ad1836: fix a memory leak if another ad1836 is registeredAxel Lin1-0/+1
ad1836 is allocated in ad1836_spi_probe() but is not freed if ad1836_register() return -EINVAL (if another ad1836 is registered). Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Barry Song <21cnbao@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-08-03ASoC: Initial WM8741 CODEC driverIan Lartey4-0/+799
The WM8741 is a very high performance stereo DAC designed for audio applications such as professional recording systems, A/V receivers and high specification CD, DVD and home theatre systems. The device supports PCM data input word lengths from 16 to 32-bits and sampling rates up to 192kHz. The WM8741 also supports DSD bit-stream data format, in both direct DSD and PCM-converted DSD modes. TODO: Expand wm8741_set_dai_sysclk and rate_constraint members to allow for all supported sample rate / Master Clock frequency combinations. Fully enable control of supplies. Signed-off-by: Ian Lartey <ian@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-08-02ALSA: hda - Do not try to create speaker NIDs for ALC268 if there aren't anyDavid Henningsson1-1/+1
Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-08-02Merge branch 'for-2.6.36' of ↵Takashi Iwai3-108/+156
git://git.kernel.org/pub/scm/linux/kernel/git/lrg/asoc-2.6 into topic/asoc
2010-08-02ASoC: omap-mcbsp: Remove period size constraint in THRESHOLD modePeter Ujfalusi1-39/+4
The use of sDMA packet mode in THRESHOLD mode removes the restriction on the period size. With the extended THRESHOLD mode user space can ask for any period size it wishes, and the driver will configure the sDMA and McBSP FIFO accordingly. Replace the hw_rule for the period size with static constraint, which will make sure that the period size will be always even (to avoid prime period size, which could be possible in mono stream) Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-08-02ASoC: omap-mcbsp: Support for sDMA packet modePeter Ujfalusi1-6/+56
Utilize the sDMA controller's packet syncronization mode, when the McBSP FIFO is in use (by extending the THRESHOLD mode). When the sDMA is configured for packet mode, the sDMA frame size does not need to match with the McBSP threshold configuration. Uppon DMA request the sDMA will transfer packet size number of words, and still trigger interrupt on frame boundary. The patch extends the original THRESHOLD mode by doing the following: if (period_words <= max_threshold) Current THRESHOLD mode configuration Otherwise (period_words > max_threshold) McBSP threshold = sDMA packet size sDMA frame size = period size With the extended THRESHOLD mode we can remove the constraint for the maximum period size, since if the period size is bigger than the maximum allowed threshold, than the driver will switch to packet mode, and picks the best (biggest) threshold value, which can divide evenly the period size. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-08-02ASoC: omap-mcbsp: Code cleanup in omap_mcbsp_dai_hw_paramsPeter Ujfalusi1-9/+12
To make the code a bit more readable, change the indexed references to the omap_mcbsp_dai_dma_params elements with pointer. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-08-02ASoC: omap-mcbsp: Restructure the code within omap_mcbsp_dai_hw_paramsPeter Ujfalusi1-14/+11
In preparation for the extended threshold mode (sDMA packet mode support), the code need to be restructured. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-07-30ALSA: hda - Add a warning for ignored pins with ALC259/268/269Takashi Iwai1-0/+2
The current ALC259/268/269 parser ignores some pins as unhandled, but user won't notice what goes wrong. So, added a warning message for the ignored pins as a hint. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-07-30ALSA: hda - Handle pin NID 0x1a on ALC259/269Takashi Iwai1-1/+2
The pin NID 0x1a should be handled as well as NID 0x1b. Also added comments. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-07-30ALSA: hda - Shut up pins at power-saving mode with Conexnat codecsTakashi Iwai1-0/+12
Call snd_hda_shutup_pins() for power-saving and reboot-notifier in patch_conexant.c as well as other codecs. This will reduce the pop noise in power-save mode. Reference: bnc#624896 https://bugzilla.novell.com/show_bug.cgi?id=624896 Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-07-30ALSA: hda - Prefer VREF50 if BIOS sets for Realtek codecsTakashi Iwai1-2/+16
If BIOS sets up the input pin as VREF 50, use the value as is instead of overriding forcibly to VREF 80. This fixes the quality of inputs on some devices like Packard-Bell M5210. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-07-30ALSA: hda - Handle missing NID 0x1b on ALC259 codecTakashi Iwai1-0/+1
Since ALC259/269 use the same parser of ALC268, the pin 0x1b was ignored as an invalid widget. Just add this NID to handle properly. This will add the missing mixer controls for some devices. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-07-30ALSA: hda - Share digital I/O parser in patch_realtek.cTakashi Iwai1-62/+78
Make a helper function to parse the digital I/Os of all Realtek codecs to simplify the code and to ensure the setups. Also, initialize digital I/O pins properly in init callbacks. Some BIOS seem to leave pins uninitialized. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-07-30ALSA: hda - Increase the connection list size for ALC662Takashi Iwai1-1/+1
Some ALC662-compatible codecs like ALC892 may have more than 4 connections for the input source. Use HDA_MAX_CONNECTIONS instead of the fixed magic number 4. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-07-30ALSA: hda - Make error messages more verboseTakashi Iwai1-3/+6
Add a prefix and more information for error messages regarding the connection-list in hda_codec.c. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-07-29Merge branch 'fix/hda' of ↵Linus Torvalds3-20/+58
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 * 'fix/hda' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ALSA: hda - Add a PC-beep workaround for ASUS P5-V ALSA: hda - Assume PC-beep as default for Realtek ALSA: hda - Don't register beep input device when no beep is available ALSA: hda - Fix pin-detection of Nvidia HDMI
2010-07-29ASoC: fsi: Add new funtion for SPDIFKuninori Morimoto1-5/+55
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-07-29ASoC: fsi: remove device id checkKuninori Morimoto1-5/+0
Current FSI driver id is not only 0 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-07-29ASoC: fsi: remove unnecessary clock processingKuninori Morimoto1-5/+0
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-07-29ALSA: hda - Rename iMic to Int Mic on Lenovo NB0763David Henningsson1-3/+3
The non-standard name "iMic" makes PulseAudio ignore the microphone. BugLink: https://launchpad.net/bugs/605101 Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-07-29Merge branch 'fix/hda' into topic/hdaTakashi Iwai1-20/+42
2010-07-29ALSA: hda - Add a PC-beep workaround for ASUS P5-VTakashi Iwai1-8/+24
ASUS P5-V provides a SSID that unexpectedly matches with the value compilant with Realtek's specification. Thus the driver interprets it badly, resulting in non-working PC beep. This patch adds a white-list for such a case; a white-list of known devices with working PC beep. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-07-29ASoC: tlv320dac33: Add support for automatic FIFO configurationPeter Ujfalusi1-26/+64
Platform parameter to enable automatic FIFO configuration when the codec is in Mode1 or Mode7 FIFO mode. When this mode is selected, the controls for changing nSample (in Mode1), and UTHR (in Mode7) are not added. The driver configures the FIFO configuration based on the stream's period size in a way, that every burst will read period size of data from the host. In Mode7 we need to use a formula, which gives close enough aproximation for the burst length from the host point of view. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-07-29ASoC: tlv320dac33: Revisit the FIFO Mode1 handlingPeter Ujfalusi1-37/+34
Replace the hardwired latency definition with platform data parameter, and simplify the nSample parameter calculation. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-07-28ALSA: hda - Assume PC-beep as default for RealtekTakashi Iwai1-3/+3
Enable PC-beep as default for hardwares that aren't compliant with the SSID value Realtek requires. In such a case, better to enable the beep to avoid a regression. Signed-off-by: Takashi Iwai <tiwai@suse.de>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-19 06:28:51 +0000