summaryrefslogtreecommitdiff
path: root/sound
AgeCommit message (Collapse)AuthorFilesLines
2011-10-31ALSA: hdsp - Correct HDSP_VERSION_BIT constant, thus partly fixing RPM detectionAdrian Knoth1-1/+1
HDSP_VERSION_BIT has to be ORed with HDSP_S_LOAD. This fixes the detection of at least some RME RPM boxes. Signed-off-by: Adrian Knoth <adi@drcomp.erfurt.thur.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-10-31ALSA: hdspm - Fix MADI channel format in the status ioctlAdrian Knoth1-1/+1
SNDRV_HDSPM_IOCTL_GET_STATUS is supposed to query the current card status, so we have to return what we receive on the MADI wire (RX), not what we transmit (TX) to others. The latter is a config item to be queried via SNDRV_HDSPM_IOCTL_GET_CONFIG. Signed-off-by: Adrian Knoth <adi@drcomp.erfurt.thur.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-10-31ALSA: hwdep: silence integer overflow warningDan Carpenter1-1/+8
Smatch complains that if device is INT_MAX then device + 1 can overflow. It just means we would have an annoying loop while we check all the devices from -2147483648 to SNDRV_MINOR_HWDEPS. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-10-27Merge branch 'topic/hda' into for-linusTakashi Iwai3-29/+88
2011-10-27ALSA: hda - Fix ADC input-amp handling for Cx20549 codecTakashi Iwai1-2/+27
It seems that Conexant CX20549 chip handle only a single input-amp even though the audio-input widget has multiple sources. This has been never clear, and I implemented in the current way based on the debug information I got at the early time -- the device reacts individual input-amp values for different sources. This is true for another Conexant codec, but it's not applied to CX20549 actually. This patch changes the auto-parser code to handle a single input-amp per audio-in widget for CX20549. After applying this, you'll see only a single "Capture" volume control instead of separate "Mic" or "Line" captures when the device is set up to use a single ADC. We haven't tested 20551 and 20561 codecs yet. If these show the similar behavior like 20549, they need to set spec->single_adc_amp=1, too. Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-10-27ALSA: hda - Keep EAPD turned on for old Conexant chipsTakashi Iwai1-21/+22
In the old Conexant chips (5045, 5047, 5051 and 5066), a single EAPD may handle both headphone and speaker outputs while it's assigned only to one of them. Turning off dynamically leads to the unexpected silent output in such a configuration with the auto-mute function. Since it's difficult to know how the EAPD is handled in the actual h/w implementation, better to keep EAPD on while running for such codecs. Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-10-27ALSA: hda/realtek - Fix missing volume controls with ALC260Takashi Iwai2-6/+39
ALC260 has multiple mixer widgets connected to the shared DAC, but the driver currently doesn't check this possibility and ignores when the DAC is shared with others. This resulted in the silent output from some routes because of lack of the amp setup. This patch adds the workaround for it by checking the route even with the shared DAC, but also checking the conflict with the existing control for the very same widget NID. Reference: https://bugzilla.novell.com/show_bug.cgi?id=726812 Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-10-27Merge branch 'topic/asoc' into for-linusTakashi Iwai166-3326/+14893
2011-10-27ASoC: wm8940: Properly set codec->dapm.bias_levelAxel Lin1-0/+2
Reported-by: Chris Paulson-Ellis <chris@edesix.com> Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@vger.kernel.org
2011-10-26Merge branch 'topic/remove-irqf_disable' into for-linusTakashi Iwai123-1177/+6060
2011-10-26Merge branch 'topic/misc' into for-linusTakashi Iwai80-1558/+1983
2011-10-26ALSA: hda - Fix pin-config for ASUS W90VTakashi Iwai1-0/+9
The association numbers of surround/CLFE speaker pins aren't correctly mapped by the auto-parser. This patch fixes the CLFE speaker pin to the right assoc value (from 3 to 1). Tested-by: Nika Topolchanskaya <nanodesuu@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-10-26ALSA: hda - Fix surround/CLFE headphone and speaker pins orderTakashi Iwai1-15/+24
When 5.1 or more headphone or speaker pins are provided, the parser still takes as is without fixing the order of channel mapping, which leads in the unexpected strange channel order by surround outputs. This patch fixes the issue by applying the same fix-up not only to line_out_pins[] but also hp_pins[] and speaker_pins[]. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-10-24ALSA: HDA: Add new revision for ALC662David Henningsson1-0/+2
The revision 0x100300 was found for ALC662. It seems to work well with patch_alc662. Cc: stable@kernel.org BugLink: http://bugs.launchpad.net/bugs/877373 Tested-by: Shengyao Xue <Shengyao.xue@canonical.com> Signed-off-by: David Henningsson <david.henningsson@canonical.com> Acked-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-10-22ASoC: max98095: Convert codec->hw_write to snd_soc_writeAxel Lin1-7/+6
codec->hw_write is broken now, convert codec->hw_write to snd_soc_write. The hardware has 2 banks of registers sharing a section in I2C register space. The 1st bank is the primary one and is cached. The 2nd bank is for loading coefficients only and they do not need cache. These coefficients registers are therefore direct writes. Thus we set cache_bypass flag to deal with this before calling snd_soc_write. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-22ASoC: keep pointer to resource so it can be freedJulia Lawall5-63/+72
Add a new variable for storing resources accessed subsequent to the one accessed using request_mem_region, so the one accessed using request_mem_region can be released if needed. The resource variable names are also changed to be more descriptive. This code is also missing some calls to iounmap. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r@ expression E, E1; identifier f; statement S1,S2,S3; @@ if (E == NULL) { ... when != if (E == NULL || ...) S1 else S2 when != E = E1 *E->f ... when any return ...; } else S3 // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-22ASoC: sgtl5000: Fix wrong mask in some snd_soc_update_bits callsAxel Lin1-6/+6
Ensure all mask bits are clear before setting new value. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Dong Aisheng <b29396@freescale.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-22ASoC: wm8996: Fix wrong mask for setting WM8996_AIF_CLOCKING_2Axel Lin1-1/+1
Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
2011-10-22ASoC: da7210: Add support for line out and DACAshish Chavan1-0/+96
DA7210 has three line outputs. OUT1 Left, OUT1 Right and OUT2 (mono). This patch adds support for gain controls for these three line outs. It also adds support for overall DAC gain control. Signed-off-by: Ashish Chavan <ashish.chavan@kpitcummins.com> Signed-off-by: David Dajun Chen <dchen@diasemi.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-22ASoC: da7210: Add support for DAPMAshish Chavan1-24/+121
This patch adds support for DAPM covering all inputs and outputs as well as ADC and DAC. Signed-off-by: Ashish Chavan <ashish.chavan@kpitcummins.com> Signed-off-by: David Dajun Chen <dchen@diasemi.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-21ALSA: hda/realtek - Fix DAC assignments of multiple speakersTakashi Iwai1-2/+8
When a device has multiple speakers and still has the auto-mute support, the driver copies line_outs[] to speaker_outs[]. And then it tries to assign DACs for both. This ended up with the assignment only to the primary DAC to all speakers. This patch fixes the situation by checking the duplicated LO/SPK case appropriately. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-10-21ASoC: Use SGTL5000_LINREG_VDDD_MASK instead of hardcoded mask valueAxel Lin1-3/+3
We have defined SGTL5000_LINREG_VDDD_MASK in sgtl5000.h, use it instead of hardcoded (0x1 << 4) - 1 for the mask. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-21ASoC: Set sgtl5000->ldo in ldo_regulator_registerAxel Lin1-0/+2
Otherwise calling ldo_regulator_remove() does not unregister regulator and free memories. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-20ASoC: wm8996: Use SND_SOC_DAPM_AIF_OUT for AIF2 CaptureAxel Lin1-2/+2
Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
2011-10-20ASoC: wm8994: Use SND_SOC_DAPM_AIF_OUT for AIF3 CaptureAxel Lin1-1/+1
Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
2011-10-20ASoC: rt5631: Remove unused codec field from struct rt5631_privAxel Lin1-2/+0
Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-20ASoC: ak4671: Use snd_soc_update_bits for read-modify-writeAxel Lin1-12/+6
Use snd_soc_update_bits for read-modify-write register access instead of open-coding it using snd_soc_read and snd_soc_write Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-20ASoC: Fix reg_word_size for ak4104Axel Lin1-1/+1
According to the register map in datasheet, the registers are 8 bit. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-20ASoC: wm9081: Fix setting soft VMID ramp enable with VMID 2*240kAxel Lin1-1/+1
According to the datasheet: BIT 2:1 VMID_SEL[1:0] VMID Divider Enable and Select 00 = VMID disabled 01 = 2x40k Omh divider 10 = 2x240k Omh divider 11 = 2x5k Omh divider To set VMID 2*240k, we should OR reg with 0x04 instead of 0x40. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-19ASoC: ak4641: Use SND_SOC_DAPM_DAC for Voice Playback stream widgetAxel Lin1-1/+1
Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-19ASoC: da7210: Add support for ALC and Noise suppressionAshish Chavan1-0/+110
This patch adds controls to set following ALC parameters, - Max gain, Min gain, Noise gain, Attack rate, Release rate and delay It also adds a switch to enable/disable noise suppression. As per DA7210 data sheet, ALC and noise suppression can be enabled only if certain conditions are met. This condition checks are handled by simply using "_EXT" version of controls to capture change events. Signed-off-by: Ashish Chavan <ashish.chavan@kpitcummins.com> Signed-off-by: David Dajun Chen <dchen@diasemi.com> Acked-by: Liam Girdwod <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-19ASoC: da7210: Add support for mute and zero cross controlsAshish Chavan1-0/+44
This patch adds support for below set of controls, (1) Mute controls for MIC, AUX and ADC (2) Zero cross controls for head phone, AUX, INPGA and line out (3) Head phone mode selection - class H or G It also adds digital_mute() call back. Signed-off-by: Ashish Chavan <ashish.chavan@kpitcummins.com> Signed-off-by: David Dajun Chen <dchen@diasemi.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-19ASoC: ak4641: Remove unused codec field from struct ak4641_privAxel Lin1-1/+0
Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-19Merge branch 'fix/hda' into topic/hdaTakashi Iwai2-0/+2
2011-10-19ASoC: ssm2602: Use snd_soc_update_bits for read-modify-writeAxel Lin1-14/+16
Use snd_soc_update_bits for read-modify-write register access instead of open-coding it using snd_soc_read and snd_soc_write Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-19ASoC: WM9081 interrupt status register is volatileMark Brown1-0/+1
Not that we have interrupt handling in the driver at the minute. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-10-19ASoC: sgtl5000: Fix setting mic bias resistorAxel Lin1-6/+3
According to the datasheet: CHIP_MIC_CTRL 0x002A BITS[9:8] BIAS_RESISTOR 0x0 = Powerd off 0x1 = 2.0 kohm 0x2 = 4.0 kohm 0x3 = 8.0 kohm To set mic bias resistor, we need to update bits[9:8] of SGTL5000_CHIP_MIC_CTRL register. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-19ASoC: sgtl5000: Fix define for SGTL5000_BIAS_R_MASKAxel Lin1-1/+1
According to the datasheet: CHIP_MIC_CTRL 0x002A BITS[9:8] BIAS_RESISTOR 0x0 = Powerd off 0x1 = 2.0 kohm 0x2 = 4.0 kohm 0x3 = 8.0 kohm Thus SGTL5000_BIAS_R_MASK should be defined as 0x0300 instead of 0x0200. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-19ASoC: ad193x: Use snd_soc_update_bits for read-modify-writeAxel Lin1-16/+15
Use snd_soc_update_bits for read-modify-write register access instead of open-coding it using snd_soc_read and snd_soc_write Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Barry Song <21cnbao@gmail.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-18ASoC: Fix prefixing of DAPM controlsMark Brown1-3/+3
We don't want to clear the prefix while we're creating the DAPM controls for the device as the prefix is applied during control creation. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-10-18ASoC: Convert WM9081 to table based control initMark Brown1-2/+2
At least for the core controls, the optionally selected controls are still added programatically. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-10-18ASoC: Update WM1811 DCS codes for latest evaluation resultsMark Brown1-2/+2
Evaluation of larger quantities of material has provided new DCS codes values to be applied for WM1811. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-10-18ALSA: HDA: conexant support for Lenovo T520/W520Daniel Suchy1-0/+1
This is patch for Conexant codec of Intel HDA driver, adding new quirk for Lenovo Thinkpad T520 and W520. Conexant autodetection works fine for T520 (similar subsystem ID is used also in W520 model) and detects more mixer features compared to generic (fallback) Lenovo quirk with hardcoded options in Conexant codec. Patch was activelly tested with Linux 3.0.4, 3.0.6 and 3.0.7 without any problems. Signed-off-by: Daniel Suchy <danny@danysek.cz> Cc: <stable@kernel.org> [3.0+] Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-10-18ALSA: hda - Add position_fix quirk for Dell Inspiron 1010Takashi Iwai1-0/+1
The previous fix for the position-buffer check gives yet another regression on a Dell laptop. The safest fix right now is to add a static quirk for this device (and better to apply it for stable kernels too). Reported-by: Éric Piel <Eric.Piel@tremplin-utc.net> Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-10-17ASoC: wm8580: Use snd_soc_update_bits for read-modify-writeAxel Lin1-13/+9
Use snd_soc_update_bits for read-modify-write register access instead of open-coding it using snd_soc_read and snd_soc_write Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-17ASoC: wm8900: Use snd_soc_update_bits for read-modify-writeAxel Lin1-67/+42
Use snd_soc_update_bits for read-modify-write register access instead of open-coding it using snd_soc_read and snd_soc_write Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-17ASoC: wm8900: Fix the mask definesAxel Lin1-7/+7
Now we have done bitwise NOT against the mask bits for the defines of WM8900_REG_CLOCKING1_BCLK_MASK, WM8900_REG_CLOCKING1_OPCLK_MASK and WM8900_LRC_MASK. But we don't have the bitwise NOT against the mask bits for the defines of WM8900_REG_CLOCKING2_DAC_CLKDIV, WM8900_REG_CLOCKING2_ADC_CLKDIV and WM8900_REG_DACCTRL_AIF_LRCLKRATE. It is error prone to mix the inconsistent meaning for different mask defines. So lets make the defines for each mask to be corresponding to the bits defines in datasheet. Don't add extra "bitwise NOT" to the defines. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-17ASoC: wm8900: Fix wrong mask for setting DAC_CLKDIV/ADC_CLKDIV/LRCLK_MODEAxel Lin1-3/+3
After checking the datasheet, I think what we want to do here is to clear the WM8900_REG_CLOCKING2_DAC_CLKDIV/WM8900_REG_CLOCKING2_ADC_CLKDIV/ WM8900_REG_DACCTRL_AIF_LRCLKRATE bits and then OR with div value. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-17ASoC: wm8741: Use snd_soc_cache_sync to sync reg_cache with the hardwareAxel Lin1-9/+1
Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-17ASoC: wm8741: Fix setting interface format for DSP modesAxel Lin1-2/+2
According to the datasheet: Format Control (05h) BITS[3:2] FMT[1:0] Audio data format selection 00 = right justified mode 01 = left justified mode 10 = I2S mode 11 = DSP mode BIT[4] LRP Polarity selec for LRCLK/DSP mode select 0 = normal LRCLK poalrity/DSP mode A 1 = inverted LRCLK poarity/DSP mode B For SND_SOC_DAIFMT_DSP_A, we should set 0x000C instead of 0x0003. For SND_SOC_DAIFMT_DSP_B, we should set 0x001C instead of 0x0013. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-14 05:58:48 +0000