| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity
Pull integrity fix from Mimi Zohar:
"A single fix to eliminate an unnecessary message"
* tag 'integrity-v6.8-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
integrity: eliminate unnecessary "Problem loading X.509 certificate" msg
|
|
Since tomoyo_write_control() updates head->write_buf when write()
of long lines is requested, we need to fetch head->write_buf after
head->io_sem is held. Otherwise, concurrent write() requests can
cause use-after-free-write and double-free problems.
Reported-by: Sam Sun <samsun1006219@gmail.com>
Closes: https://lkml.kernel.org/r/CAEkJfYNDspuGxYx5kym8Lvp--D36CMDUErg4rxfWFJuPbbji8g@mail.gmail.com
Fixes: bd03a3e4c9a9 ("TOMOYO: Add policy namespace support.")
Cc: <stable@vger.kernel.org> # Linux 3.1+
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux
Pull Landlock fix from Mickaël Salaün:
"Fix a potential issue when handling inodes with inconsistent
properties"
* tag 'landlock-6.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux:
landlock: Fix asymmetric private inodes referring
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm
Pull lsm fixes from Paul Moore:
"Two small patches, one for AppArmor and one for SELinux, to fix
potential uninitialized variable problems in the new LSM syscalls we
added during the v6.8 merge window.
We haven't been able to get a response from John on the AppArmor
patch, but considering both the importance of the patch and it's
rather simple nature it seems like a good idea to get this merged
sooner rather than later.
I'm sure John is just taking some much needed vacation; if we need to
revise this when he gets back to his email we can"
* tag 'lsm-pr-20240227' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm:
apparmor: fix lsm_get_self_attr()
selinux: fix lsm_get_self_attr()
|
|
When linking or renaming a file, if only one of the source or
destination directory is backed by an S_PRIVATE inode, then the related
set of layer masks would be used as uninitialized by
is_access_to_paths_allowed(). This would result to indeterministic
access for one side instead of always being allowed.
This bug could only be triggered with a mounted filesystem containing
both S_PRIVATE and !S_PRIVATE inodes, which doesn't seem possible.
The collect_domain_accesses() calls return early if
is_nouser_or_private() returns false, which means that the directory's
superblock has SB_NOUSER or its inode has S_PRIVATE. Because rename or
link actions are only allowed on the same mounted filesystem, the
superblock is always the same for both source and destination
directories. However, it might be possible in theory to have an
S_PRIVATE parent source inode with an !S_PRIVATE parent destination
inode, or vice versa.
To make sure this case is not an issue, explicitly initialized both set
of layer masks to 0, which means to allow all actions on the related
side. If at least on side has !S_PRIVATE, then
collect_domain_accesses() and is_access_to_paths_allowed() check for the
required access rights.
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Günther Noack <gnoack@google.com>
Cc: Jann Horn <jannh@google.com>
Cc: Shervin Oloumi <enlightened@chromium.org>
Cc: stable@vger.kernel.org
Fixes: b91c3e4ea756 ("landlock: Add support for file reparenting with LANDLOCK_ACCESS_FS_REFER")
Link: https://lore.kernel.org/r/20240219190345.2928627-1-mic@digikod.net
Signed-off-by: Mickaël Salaün <mic@digikod.net>
|
|
In apparmor_getselfattr() when an invalid AppArmor attribute is
requested, or a value hasn't been explicitly set for the requested
attribute, the label passed to aa_put_label() is not properly
initialized which can cause problems when the pointer value is non-NULL
and AppArmor attempts to drop a reference on the bogus label object.
Cc: Casey Schaufler <casey@schaufler-ca.com>
Cc: John Johansen <john.johansen@canonical.com>
Fixes: 223981db9baf ("AppArmor: Add selfattr hooks")
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Reviewed-by: Paul Moore <paul@paul-moore.com>
[PM: description changes as discussed with MS]
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
selinux_getselfattr() doesn't properly initialize the string pointer
it passes to selinux_lsm_getattr() which can cause a problem when an
attribute hasn't been explicitly set; selinux_lsm_getattr() returns
0/success, but does not set or initialize the string label/attribute.
Failure to properly initialize the string causes problems later in
selinux_getselfattr() when the function attempts to kfree() the
string.
Cc: Casey Schaufler <casey@schaufler-ca.com>
Fixes: 762c934317e6 ("SELinux: Add selfattr hooks")
Suggested-by: Paul Moore <paul@paul-moore.com>
[PM: description changes as discussed in the thread]
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm
Pull lsm fix from Paul Moore:
"One small LSM patch to fix a potential integer overflow in the newly
added lsm_set_self_attr() syscall"
* tag 'lsm-pr-20240215' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm:
lsm: fix integer overflow in lsm_set_self_attr() syscall
|
|
Currently when the kernel fails to add a cert to the .machine keyring,
it will throw an error immediately in the function integrity_add_key.
Since the kernel will try adding to the .platform keyring next or throw
an error (in the caller of integrity_add_key i.e. add_to_machine_keyring),
so there is no need to throw an error immediately in integrity_add_key.
Reported-by: itrymybest80@protonmail.com
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=2239331
Fixes: d19967764ba8 ("integrity: Introduce a Linux keyring called machine")
Reviewed-by: Eric Snowberg <eric.snowberg@oracle.com>
Signed-off-by: Coiby Xu <coxu@redhat.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
|
|
security_setselfattr() has an integer overflow bug that leads to
out-of-bounds access when userspace provides bogus input:
`lctx->ctx_len + sizeof(*lctx)` is checked against `lctx->len` (and,
redundantly, also against `size`), but there are no checks on
`lctx->ctx_len`.
Therefore, userspace can provide an `lsm_ctx` with `->ctx_len` set to a
value between `-sizeof(struct lsm_ctx)` and -1, and this bogus `->ctx_len`
will then be passed to an LSM module as a buffer length, causing LSM
modules to perform out-of-bounds accesses.
The following reproducer will demonstrate this under ASAN (if AppArmor is
loaded as an LSM):
```
struct lsm_ctx {
uint64_t id;
uint64_t flags;
uint64_t len;
uint64_t ctx_len;
char ctx[];
};
int main(void) {
size_t size = sizeof(struct lsm_ctx);
struct lsm_ctx *ctx = malloc(size);
ctx->id = 104/*LSM_ID_APPARMOR*/;
ctx->flags = 0;
ctx->len = size;
ctx->ctx_len = -sizeof(struct lsm_ctx);
syscall(
460/*__NR_lsm_set_self_attr*/,
/*attr=*/ 100/*LSM_ATTR_CURRENT*/,
/*ctx=*/ ctx,
/*size=*/ size,
/*flags=*/ 0
);
}
```
Fixes: a04a1198088a ("LSM: syscalls for current process attributes")
Signed-off-by: Jann Horn <jannh@google.com>
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
[PM: subj tweak, removed ref to ASAN splat that isn't included]
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm
Pull lsm fixes from Paul Moore:
"Two small patches to fix some problems relating to LSM hook return
values and how the individual LSMs interact"
* tag 'lsm-pr-20240131' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm:
lsm: fix default return value of the socket_getpeersec_*() hooks
lsm: fix the logic in security_inode_getsecctx()
|
|
For these hooks the true "neutral" value is -EOPNOTSUPP, which is
currently what is returned when no LSM provides this hook and what LSMs
return when there is no security context set on the socket. Correct the
value in <linux/lsm_hooks.h> and adjust the dispatch functions in
security/security.c to avoid issues when the BPF LSM is enabled.
Cc: stable@vger.kernel.org
Fixes: 98e828a0650f ("security: Refactor declaration of LSM hooks")
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
[PM: subject line tweak]
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
The inode_getsecctx LSM hook has previously been corrected to have
-EOPNOTSUPP instead of 0 as the default return value to fix BPF LSM
behavior. However, the call_int_hook()-generated loop in
security_inode_getsecctx() was left treating 0 as the neutral value, so
after an LSM returns 0, the loop continues to try other LSMs, and if one
of them returns a non-zero value, the function immediately returns with
said value. So in a situation where SELinux and the BPF LSMs registered
this hook, -EOPNOTSUPP would be incorrectly returned whenever SELinux
returned 0.
Fix this by open-coding the call_int_hook() loop and making it use the
correct LSM_RET_DEFAULT() value as the neutral one, similar to what
other hooks do.
Cc: stable@vger.kernel.org
Reported-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Link: https://lore.kernel.org/selinux/CAEjxPJ4ev-pasUwGx48fDhnmjBnq_Wh90jYPwRQRAqXxmOKD4Q@mail.gmail.com/
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2257983
Fixes: b36995b8609a ("lsm: fix default return value for inode_getsecctx")
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
[PM: subject line tweak]
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity
Pull integrity fix from Mimi Zohar:
"Revert patch that required user-provided key data, since keys can be
created from kernel-generated random numbers"
* tag 'integrity-v6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
Revert "KEYS: encrypted: Add check for strsep"
|
|
This reverts commit b4af096b5df5dd131ab796c79cedc7069d8f4882.
New encrypted keys are created either from kernel-generated random
numbers or user-provided decrypted data. Revert the change requiring
user-provided decrypted data.
Reported-by: Vishal Verma <vishal.l.verma@intel.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
|
|
After commit 978ffcbf00d8 ("execve: open the executable file before
doing anything else"), current->in_execve was no longer in sync with the
open(). This broke AppArmor and TOMOYO which depend on this flag to
distinguish "open" operations from being "exec" operations.
Instead of moving around in_execve, switch to using __FMODE_EXEC, which
is where the "is this an exec?" intent is stored. Note that TOMOYO still
uses in_execve around cred handling.
Reported-by: Kevin Locke <kevin@kevinlocke.name>
Closes: https://lore.kernel.org/all/ZbE4qn9_h14OqADK@kevinlocke.name
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Fixes: 978ffcbf00d8 ("execve: open the executable file before doing anything else")
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: John Johansen <john.johansen@canonical.com>
Cc: Paul Moore <paul@paul-moore.com>
Cc: James Morris <jmorris@namei.org>
Cc: Serge E. Hallyn <serge@hallyn.com>
Cc: Kentaro Takeda <takedakn@nttdata.co.jp>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Jan Kara <jack@suse.cz>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: <linux-fsdevel@vger.kernel.org>
Cc: <linux-mm@kvack.org>
Cc: <apparmor@lists.ubuntu.com>
Cc: <linux-security-module@vger.kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor
Pull AppArmor updates from John Johansen:
"This adds a single feature, switch the hash used to check policy from
sha1 to sha256
There are fixes for two memory leaks, and refcount bug and a potential
crash when a profile name is empty. Along with a couple minor code
cleanups.
Summary:
Features
- switch policy hash from sha1 to sha256
Bug Fixes
- Fix refcount leak in task_kill
- Fix leak of pdb objects and trans_table
- avoid crash when parse profie name is empty
Cleanups
- add static to stack_msg and nulldfa
- more kernel-doc cleanups"
* tag 'apparmor-pr-2024-01-18' of git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor:
apparmor: Fix memory leak in unpack_profile()
apparmor: avoid crash when parsed profile name is empty
apparmor: fix possible memory leak in unpack_trans_table
apparmor: free the allocated pdb objects
apparmor: Fix ref count leak in task_kill
apparmor: cleanup network hook comments
apparmor: add missing params to aa_may_ptrace kernel-doc comments
apparmor: declare nulldfa as static
apparmor: declare stack_msg as static
apparmor: switch SECURITY_APPARMOR_HASH from sha1 to sha256
|
|
Pull misc filesystem updates from Al Viro:
"Misc cleanups (the part that hadn't been picked by individual fs
trees)"
* tag 'pull-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
apparmorfs: don't duplicate kfree_link()
orangefs: saner arguments passing in readdir guts
ocfs2_find_match(): there's no such thing as NULL or negative ->d_parent
reiserfs_add_entry(): get rid of pointless namelen checks
__ocfs2_add_entry(), ocfs2_prepare_dir_for_insert(): namelen checks
ext4_add_entry(): ->d_name.len is never 0
befs: d_obtain_alias(ERR_PTR(...)) will do the right thing
affs: d_obtain_alias(ERR_PTR(...)) will do the right thing
/proc/sys: use d_splice_alias() calling conventions to simplify failure exits
hostfs: use d_splice_alias() calling conventions to simplify failure exits
udf_fiiter_add_entry(): check for zero ->d_name.len is bogus...
udf: d_obtain_alias(ERR_PTR(...)) will do the right thing...
udf: d_splice_alias() will do the right thing on ERR_PTR() inode
nfsd: kill stale comment about simple_fill_super() requirements
bfs_add_entry(): get rid of pointless ->d_name.len checks
nilfs2: d_obtain_alias(ERR_PTR(...)) will do the right thing...
zonefs: d_splice_alias() will do the right thing on ERR_PTR() inode
|
|
Pull io_uring updates from Jens Axboe:
"Mostly just come fixes and cleanups, but one feature as well. In
detail:
- Harden the check for handling IOPOLL based on return (Pavel)
- Various minor optimizations (Pavel)
- Drop remnants of SCM_RIGHTS fd passing support, now that it's no
longer supported since 6.7 (me)
- Fix for a case where bytes_done wasn't initialized properly on a
failure condition for read/write requests (me)
- Move the register related code to a separate file (me)
- Add support for returning the provided ring buffer head (me)
- Add support for adding a direct descriptor to the normal file table
(me, Christian Brauner)
- Fix for ensuring pending task_work for a ring with DEFER_TASKRUN is
run even if we timeout waiting (me)"
* tag 'for-6.8/io_uring-2024-01-08' of git://git.kernel.dk/linux:
io_uring: ensure local task_work is run on wait timeout
io_uring/kbuf: add method for returning provided buffer ring head
io_uring/rw: ensure io->bytes_done is always initialized
io_uring: drop any code related to SCM_RIGHTS
io_uring/unix: drop usage of io_uring socket
io_uring/register: move io_uring_register(2) related code to register.c
io_uring/openclose: add support for IORING_OP_FIXED_FD_INSTALL
io_uring/cmd: inline io_uring_cmd_get_task
io_uring/cmd: inline io_uring_cmd_do_in_task_lazy
io_uring: split out cmd api into a separate header
io_uring: optimise ltimeout for inline execution
io_uring: don't check iopoll if request completes
|
|
Pull header cleanups from Kent Overstreet:
"The goal is to get sched.h down to a type only header, so the main
thing happening in this patchset is splitting out various _types.h
headers and dependency fixups, as well as moving some things out of
sched.h to better locations.
This is prep work for the memory allocation profiling patchset which
adds new sched.h interdepencencies"
* tag 'header_cleanup-2024-01-10' of https://evilpiepirate.org/git/bcachefs: (51 commits)
Kill sched.h dependency on rcupdate.h
kill unnecessary thread_info.h include
Kill unnecessary kernel.h include
preempt.h: Kill dependency on list.h
rseq: Split out rseq.h from sched.h
LoongArch: signal.c: add header file to fix build error
restart_block: Trim includes
lockdep: move held_lock to lockdep_types.h
sem: Split out sem_types.h
uidgid: Split out uidgid_types.h
seccomp: Split out seccomp_types.h
refcount: Split out refcount_types.h
uapi/linux/resource.h: fix include
x86/signal: kill dependency on time.h
syscall_user_dispatch.h: split out *_types.h
mm_types_task.h: Trim dependencies
Split out irqflags_types.h
ipc: Kill bogus dependency on spinlock.h
shm: Slim down dependencies
workqueue: Split out workqueue_types.h
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity
Pull integrity updates from Mimi Zohar:
- Add a new IMA/EVM maintainer and reviewer
- Disable EVM on overlayfs
The EVM HMAC and the original file signatures contain filesystem
specific metadata (e.g. i_ino, i_generation and s_uuid), preventing
the security.evm xattr from directly being copied up to the overlay.
Further before calculating and writing out the overlay file's EVM
HMAC, EVM must first verify the existing backing file's
'security.evm' value.
For now until a solution is developed, disable EVM on overlayfs.
- One bug fix and two cleanups
* tag 'integrity-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
overlay: disable EVM
evm: add support to disable EVM on unsupported filesystems
evm: don't copy up 'security.evm' xattr
MAINTAINERS: Add Eric Snowberg as a reviewer to IMA
MAINTAINERS: Add Roberto Sassu as co-maintainer to IMA and EVM
KEYS: encrypted: Add check for strsep
ima: Remove EXPERIMENTAL from Kconfig
ima: Reword IMA_KEYRINGS_PERMIT_SIGNED_BY_BUILTIN_OR_SECONDARY
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux
Pull Landlock updates from Mickaël Salaün:
"New tests, a slight optimization, and some cosmetic changes"
* tag 'landlock-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux:
landlock: Optimize the number of calls to get_access_mask slightly
selftests/landlock: Rename "permitted" to "allowed" in ftruncate tests
landlock: Remove remaining "inline" modifiers in .c files [v6.6]
landlock: Remove remaining "inline" modifiers in .c files [v6.1]
landlock: Remove remaining "inline" modifiers in .c files [v5.15]
selftests/landlock: Add tests to check unhandled rule's access rights
selftests/landlock: Add tests to check unknown rule's access rights
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm
Pull security module updates from Paul Moore:
- Add three new syscalls: lsm_list_modules(), lsm_get_self_attr(), and
lsm_set_self_attr().
The first syscall simply lists the LSMs enabled, while the second and
third get and set the current process' LSM attributes. Yes, these
syscalls may provide similar functionality to what can be found under
/proc or /sys, but they were designed to support multiple,
simultaneaous (stacked) LSMs from the start as opposed to the current
/proc based solutions which were created at a time when only one LSM
was allowed to be active at a given time.
We have spent considerable time discussing ways to extend the
existing /proc interfaces to support multiple, simultaneaous LSMs and
even our best ideas have been far too ugly to support as a kernel
API; after +20 years in the kernel, I felt the LSM layer had
established itself enough to justify a handful of syscalls.
Support amongst the individual LSM developers has been nearly
unanimous, with a single objection coming from Tetsuo (TOMOYO) as he
is worried that the LSM_ID_XXX token concept will make it more
difficult for out-of-tree LSMs to survive. Several members of the LSM
community have demonstrated the ability for out-of-tree LSMs to
continue to exist by picking high/unused LSM_ID values as well as
pointing out that many kernel APIs rely on integer identifiers, e.g.
syscalls (!), but unfortunately Tetsuo's objections remain.
My personal opinion is that while I have no interest in penalizing
out-of-tree LSMs, I'm not going to penalize in-tree development to
support out-of-tree development, and I view this as a necessary step
forward to support the push for expanded LSM stacking and reduce our
reliance on /proc and /sys which has occassionally been problematic
for some container users. Finally, we have included the linux-api
folks on (all?) recent revisions of the patchset and addressed all of
their concerns.
- Add a new security_file_ioctl_compat() LSM hook to handle the 32-bit
ioctls on 64-bit systems problem.
This patch includes support for all of the existing LSMs which
provide ioctl hooks, although it turns out only SELinux actually
cares about the individual ioctls. It is worth noting that while
Casey (Smack) and Tetsuo (TOMOYO) did not give explicit ACKs to this
patch, they did both indicate they are okay with the changes.
- Fix a potential memory leak in the CALIPSO code when IPv6 is disabled
at boot.
While it's good that we are fixing this, I doubt this is something
users are seeing in the wild as you need to both disable IPv6 and
then attempt to configure IPv6 labeled networking via
NetLabel/CALIPSO; that just doesn't make much sense.
Normally this would go through netdev, but Jakub asked me to take
this patch and of all the trees I maintain, the LSM tree seemed like
the best fit.
- Update the LSM MAINTAINERS entry with additional information about
our process docs, patchwork, bug reporting, etc.
I also noticed that the Lockdown LSM is missing a dedicated
MAINTAINERS entry so I've added that to the pull request. I've been
working with one of the major Lockdown authors/contributors to see if
they are willing to step up and assume a Lockdown maintainer role;
hopefully that will happen soon, but in the meantime I'll continue to
look after it.
- Add a handful of mailmap entries for Serge Hallyn and myself.
* tag 'lsm-pr-20240105' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm: (27 commits)
lsm: new security_file_ioctl_compat() hook
lsm: Add a __counted_by() annotation to lsm_ctx.ctx
calipso: fix memory leak in netlbl_calipso_add_pass()
selftests: remove the LSM_ID_IMA check in lsm/lsm_list_modules_test
MAINTAINERS: add an entry for the lockdown LSM
MAINTAINERS: update the LSM entry
mailmap: add entries for Serge Hallyn's dead accounts
mailmap: update/replace my old email addresses
lsm: mark the lsm_id variables are marked as static
lsm: convert security_setselfattr() to use memdup_user()
lsm: align based on pointer length in lsm_fill_user_ctx()
lsm: consolidate buffer size handling into lsm_fill_user_ctx()
lsm: correct error codes in security_getselfattr()
lsm: cleanup the size counters in security_getselfattr()
lsm: don't yet account for IMA in LSM_CONFIG_COUNT calculation
lsm: drop LSM_ID_IMA
LSM: selftests for Linux Security Module syscalls
SELinux: Add selfattr hooks
AppArmor: Add selfattr hooks
Smack: implement setselfattr and getselfattr hooks
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux
Pull selinux updates from Paul Moore:
- Add a new SELinux initial SID, SECINITSID_INIT, to represent
userspace processes started before the SELinux policy is loaded in
early boot.
Prior to this patch all processes were marked as SECINITSID_KERNEL
before the SELinux policy was loaded, making it difficult to
distinquish early boot userspace processes from the kernel in the
SELinux policy.
For most users this will be a non-issue as the policy is loaded early
enough during boot, but for users who load their SELinux policy
relatively late, this should make it easier to construct meaningful
security policies.
- Cleanups to the selinuxfs code by Al, mostly on VFS related issues
during a policy reload.
The commit description has more detail, but the quick summary is that
we are replacing a disconnected directory approach with a temporary
directory that we swapover at the end of the reload.
- Fix an issue where the input sanity checking on socket bind()
operations was slightly different depending on the presence of
SELinux.
This is caused by the placement of the LSM hooks in the generic
socket layer as opposed to the protocol specific bind() handler where
the protocol specific sanity checks are performed. Mickaël has
mentioned that he is working to fix this, but in the meantime we just
ensure that we are replicating the checks properly.
We need to balance the placement of the LSM hooks with the number of
LSM hooks; pushing the hooks down into the protocol layers is likely
not the right answer.
- Update the avc_has_perm_noaudit() prototype to better match the
function definition.
- Migrate from using partial_name_hash() to full_name_hash() the
filename transition hash table.
This improves the quality of the code and has the potential for a
minor performance bump.
- Consolidate some open coded SELinux access vector comparisions into a
single new function, avtab_node_cmp(), and use that instead.
A small, but nice win for code quality and maintainability.
- Updated the SELinux MAINTAINERS entry with additional information
around process, bug reporting, etc.
We're also updating some of our "official" roles: dropping Eric Paris
and adding Ondrej as a reviewer.
- Cleanup the coding style crimes in security/selinux/include.
While I'm not a fan of code churn, I am pushing for more automated
code checks that can be done at the developer level and one of the
obvious things to check for is coding style.
In an effort to start from a "good" base I'm slowly working through
our source files cleaning them up with the help of clang-format and
good ol' fashioned human eyeballs; this has the first batch of these
changes.
I've been splitting the changes up per-file to help reduce the impact
if backports are required (either for LTS or distro kernels), and I
expect the some of the larger files, e.g. hooks.c and ss/services.c,
will likely need to be split even further.
- Cleanup old, outdated comments.
* tag 'selinux-pr-20240105' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux: (24 commits)
selinux: Fix error priority for bind with AF_UNSPEC on PF_INET6 socket
selinux: fix style issues in security/selinux/include/initial_sid_to_string.h
selinux: fix style issues in security/selinux/include/xfrm.h
selinux: fix style issues in security/selinux/include/security.h
selinux: fix style issues with security/selinux/include/policycap_names.h
selinux: fix style issues in security/selinux/include/policycap.h
selinux: fix style issues in security/selinux/include/objsec.h
selinux: fix style issues with security/selinux/include/netlabel.h
selinux: fix style issues in security/selinux/include/netif.h
selinux: fix style issues in security/selinux/include/ima.h
selinux: fix style issues in security/selinux/include/conditional.h
selinux: fix style issues in security/selinux/include/classmap.h
selinux: fix style issues in security/selinux/include/avc_ss.h
selinux: align avc_has_perm_noaudit() prototype with definition
selinux: fix style issues in security/selinux/include/avc.h
selinux: fix style issues in security/selinux/include/audit.h
MAINTAINERS: drop Eric Paris from his SELinux role
MAINTAINERS: add Ondrej Mosnacek as a SELinux reviewer
selinux: remove the wrong comment about multithreaded process handling
selinux: introduce an initial SID for early boot processes
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
"Quite a lot of kexec work this time around. Many singleton patches in
many places. The notable patch series are:
- nilfs2 folio conversion from Matthew Wilcox in 'nilfs2: Folio
conversions for file paths'.
- Additional nilfs2 folio conversion from Ryusuke Konishi in 'nilfs2:
Folio conversions for directory paths'.
- IA64 remnant removal in Heiko Carstens's 'Remove unused code after
IA-64 removal'.
- Arnd Bergmann has enabled the -Wmissing-prototypes warning
everywhere in 'Treewide: enable -Wmissing-prototypes'. This had
some followup fixes:
- Nathan Chancellor has cleaned up the hexagon build in the series
'hexagon: Fix up instances of -Wmissing-prototypes'.
- Nathan also addressed some s390 warnings in 's390: A couple of
fixes for -Wmissing-prototypes'.
- Arnd Bergmann addresses the same warnings for MIPS in his series
'mips: address -Wmissing-prototypes warnings'.
- Baoquan He has made kexec_file operate in a top-down-fitting manner
similar to kexec_load in the series 'kexec_file: Load kernel at top
of system RAM if required'
- Baoquan He has also added the self-explanatory 'kexec_file: print
out debugging message if required'.
- Some checkstack maintenance work from Tiezhu Yang in the series
'Modify some code about checkstack'.
- Douglas Anderson has disentangled the watchdog code's logging when
multiple reports are occurring simultaneously. The series is
'watchdog: Better handling of concurrent lockups'.
- Yuntao Wang has contributed some maintenance work on the crash code
in 'crash: Some cleanups and fixes'"
* tag 'mm-nonmm-stable-2024-01-09-10-33' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (157 commits)
crash_core: fix and simplify the logic of crash_exclude_mem_range()
x86/crash: use SZ_1M macro instead of hardcoded value
x86/crash: remove the unused image parameter from prepare_elf_headers()
kdump: remove redundant DEFAULT_CRASH_KERNEL_LOW_SIZE
scripts/decode_stacktrace.sh: strip unexpected CR from lines
watchdog: if panicking and we dumped everything, don't re-enable dumping
watchdog/hardlockup: use printk_cpu_sync_get_irqsave() to serialize reporting
watchdog/softlockup: use printk_cpu_sync_get_irqsave() to serialize reporting
watchdog/hardlockup: adopt softlockup logic avoiding double-dumps
kexec_core: fix the assignment to kimage->control_page
x86/kexec: fix incorrect end address passed to kernel_ident_mapping_init()
lib/trace_readwrite.c:: replace asm-generic/io with linux/io
nilfs2: cpfile: fix some kernel-doc warnings
stacktrace: fix kernel-doc typo
scripts/checkstack.pl: fix no space expression between sp and offset
x86/kexec: fix incorrect argument passed to kexec_dprintk()
x86/kexec: use pr_err() instead of kexec_dprintk() when an error occurs
nilfs2: add missing set_freezable() for freezable kthread
kernel: relay: remove relay_file_splice_read dead code, doesn't work
docs: submit-checklist: remove all of "make namespacecheck"
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"Many singleton patches against the MM code. The patch series which are
included in this merge do the following:
- Peng Zhang has done some mapletree maintainance work in the series
'maple_tree: add mt_free_one() and mt_attr() helpers'
'Some cleanups of maple tree'
- In the series 'mm: use memmap_on_memory semantics for dax/kmem'
Vishal Verma has altered the interworking between memory-hotplug
and dax/kmem so that newly added 'device memory' can more easily
have its memmap placed within that newly added memory.
- Matthew Wilcox continues folio-related work (including a few fixes)
in the patch series
'Add folio_zero_tail() and folio_fill_tail()'
'Make folio_start_writeback return void'
'Fix fault handler's handling of poisoned tail pages'
'Convert aops->error_remove_page to ->error_remove_folio'
'Finish two folio conversions'
'More swap folio conversions'
- Kefeng Wang has also contributed folio-related work in the series
'mm: cleanup and use more folio in page fault'
- Jim Cromie has improved the kmemleak reporting output in the series
'tweak kmemleak report format'.
- In the series 'stackdepot: allow evicting stack traces' Andrey
Konovalov to permits clients (in this case KASAN) to cause eviction
of no longer needed stack traces.
- Charan Teja Kalla has fixed some accounting issues in the page
allocator's atomic reserve calculations in the series 'mm:
page_alloc: fixes for high atomic reserve caluculations'.
- Dmitry Rokosov has added to the samples/ dorectory some sample code
for a userspace memcg event listener application. See the series
'samples: introduce cgroup events listeners'.
- Some mapletree maintanance work from Liam Howlett in the series
'maple_tree: iterator state changes'.
- Nhat Pham has improved zswap's approach to writeback in the series
'workload-specific and memory pressure-driven zswap writeback'.
- DAMON/DAMOS feature and maintenance work from SeongJae Park in the
series
'mm/damon: let users feed and tame/auto-tune DAMOS'
'selftests/damon: add Python-written DAMON functionality tests'
'mm/damon: misc updates for 6.8'
- Yosry Ahmed has improved memcg's stats flushing in the series 'mm:
memcg: subtree stats flushing and thresholds'.
- In the series 'Multi-size THP for anonymous memory' Ryan Roberts
has added a runtime opt-in feature to transparent hugepages which
improves performance by allocating larger chunks of memory during
anonymous page faults.
- Matthew Wilcox has also contributed some cleanup and maintenance
work against eh buffer_head code int he series 'More buffer_head
cleanups'.
- Suren Baghdasaryan has done work on Andrea Arcangeli's series
'userfaultfd move option'. UFFDIO_MOVE permits userspace heap
compaction algorithms to move userspace's pages around rather than
UFFDIO_COPY'a alloc/copy/free.
- Stefan Roesch has developed a 'KSM Advisor', in the series 'mm/ksm:
Add ksm advisor'. This is a governor which tunes KSM's scanning
aggressiveness in response to userspace's current needs.
- Chengming Zhou has optimized zswap's temporary working memory use
in the series 'mm/zswap: dstmem reuse optimizations and cleanups'.
- Matthew Wilcox has performed some maintenance work on the writeback
code, both code and within filesystems. The series is 'Clean up the
writeback paths'.
- Andrey Konovalov has optimized KASAN's handling of alloc and free
stack traces for secondary-level allocators, in the series 'kasan:
save mempool stack traces'.
- Andrey also performed some KASAN maintenance work in the series
'kasan: assorted clean-ups'.
- David Hildenbrand has gone to town on the rmap code. Cleanups, more
pte batching, folio conversions and more. See the series 'mm/rmap:
interface overhaul'.
- Kinsey Ho has contributed some maintenance work on the MGLRU code
in the series 'mm/mglru: Kconfig cleanup'.
- Matthew Wilcox has contributed lruvec page accounting code cleanups
in the series 'Remove some lruvec page accounting functions'"
* tag 'mm-stable-2024-01-08-15-31' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (361 commits)
mm, treewide: rename MAX_ORDER to MAX_PAGE_ORDER
mm, treewide: introduce NR_PAGE_ORDERS
selftests/mm: add separate UFFDIO_MOVE test for PMD splitting
selftests/mm: skip test if application doesn't has root privileges
selftests/mm: conform test to TAP format output
selftests: mm: hugepage-mmap: conform to TAP format output
selftests/mm: gup_test: conform test to TAP format output
mm/selftests: hugepage-mremap: conform test to TAP format output
mm/vmstat: move pgdemote_* out of CONFIG_NUMA_BALANCING
mm: zsmalloc: return -ENOSPC rather than -EINVAL in zs_malloc while size is too large
mm/memcontrol: remove __mod_lruvec_page_state()
mm/khugepaged: use a folio more in collapse_file()
slub: use a folio in __kmalloc_large_node
slub: use folio APIs in free_large_kmalloc()
slub: use alloc_pages_node() in alloc_slab_page()
mm: remove inc/dec lruvec page state functions
mm: ratelimit stat flush from workingset shrinker
kasan: stop leaking stack trace handles
mm/mglru: remove CONFIG_TRANSPARENT_HUGEPAGE
mm/mglru: add dummy pmd_dirty()
...
|
|
The aa_put_pdb(rules->file) should be called when rules->file is
reassigned, otherwise there may be a memory leak.
This was found via kmemleak:
unreferenced object 0xffff986c17056600 (size 192):
comm "apparmor_parser", pid 875, jiffies 4294893488
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 89 14 04 6c 98 ff ff ............l...
00 00 8c 11 6c 98 ff ff bc 0c 00 00 00 00 00 00 ....l...........
backtrace (crc e28c80c4):
[<ffffffffba25087f>] kmemleak_alloc+0x4f/0x90
[<ffffffffb95ecd42>] kmalloc_trace+0x2d2/0x340
[<ffffffffb98a7b3d>] aa_alloc_pdb+0x4d/0x90
[<ffffffffb98ab3b8>] unpack_pdb+0x48/0x660
[<ffffffffb98ac073>] unpack_profile+0x693/0x1090
[<ffffffffb98acf5a>] aa_unpack+0x10a/0x6e0
[<ffffffffb98a93e3>] aa_replace_profiles+0xa3/0x1210
[<ffffffffb989a183>] policy_update+0x163/0x2a0
[<ffffffffb989a381>] profile_replace+0xb1/0x130
[<ffffffffb966cb64>] vfs_write+0xd4/0x3d0
[<ffffffffb966d05b>] ksys_write+0x6b/0xf0
[<ffffffffb966d10e>] __x64_sys_write+0x1e/0x30
[<ffffffffba242316>] do_syscall_64+0x76/0x120
[<ffffffffba4000e5>] entry_SYSCALL_64_after_hwframe+0x6c/0x74
So add aa_put_pdb(rules->file) to fix it when rules->file is reassigned.
Fixes: 98b824ff8984 ("apparmor: refcount the pdb")
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
|
|
commit 23baf831a32c ("mm, treewide: redefine MAX_ORDER sanely") has
changed the definition of MAX_ORDER to be inclusive. This has caused
issues with code that was not yet upstream and depended on the previous
definition.
To draw attention to the altered meaning of the define, rename MAX_ORDER
to MAX_PAGE_ORDER.
Link: https://lkml.kernel.org/r/20231228144704.14033-2-kirill.shutemov@linux.intel.com
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs iov_iter cleanups from Christian Brauner:
"This contains a minor cleanup. The patches drop an unused argument
from import_single_range() allowing to replace import_single_range()
with import_ubuf() and dropping import_single_range() completely"
* tag 'vfs-6.8.iov_iter' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
iov_iter: replace import_single_range() with import_ubuf()
iov_iter: remove unused 'iov' argument from import_single_range()
|
|
Pull vfs rw updates from Christian Brauner:
"This contains updates from Amir for read-write backing file helpers
for stacking filesystems such as overlayfs:
- Fanotify is currently in the process of introducing pre content
events. Roughly, a new permission event will be added indicating
that it is safe to write to the file being accessed. These events
are used by hierarchical storage managers to e.g., fill the content
of files on first access.
During that work we noticed that our current permission checking is
inconsistent in rw_verify_area() and remap_verify_area().
Especially in the splice code permission checking is done multiple
times. For example, one time for the whole range and then again for
partial ranges inside the iterator.
In addition, we mostly do permission checking before we call
file_start_write() except for a few places where we call it after.
For pre-content events we need such permission checking to be done
before file_start_write(). So this is a nice reason to clean this
all up.
After this series, all permission checking is done before
file_start_write().
As part of this cleanup we also massaged the splice code a bit. We
got rid of a few helpers because we are alredy drowning in special
read-write helpers. We also cleaned up the return types for splice
helpers.
- Introduce generic read-write helpers for backing files. This lifts
some overlayfs code to common code so it can be used by the FUSE
passthrough work coming in over the next cycles. Make Amir and
Miklos the maintainers for this new subsystem of the vfs"
* tag 'vfs-6.8.rw' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (30 commits)
fs: fix __sb_write_started() kerneldoc formatting
fs: factor out backing_file_mmap() helper
fs: factor out backing_file_splice_{read,write}() helpers
fs: factor out backing_file_{read,write}_iter() helpers
fs: prepare for stackable filesystems backing file helpers
fsnotify: optionally pass access range in file permission hooks
fsnotify: assert that file_start_write() is not held in permission hooks
fsnotify: split fsnotify_perm() into two hooks
fs: use splice_copy_file_range() inline helper
splice: return type ssize_t from all helpers
fs: use do_splice_direct() for nfsd/ksmbd server-side-copy
fs: move file_start_write() into direct_splice_actor()
fs: fork splice_file_range() from do_splice_direct()
fs: create {sb,file}_write_not_started() helpers
fs: create file_write_started() helper
fs: create __sb_write_started() helper
fs: move kiocb_start_write() into vfs_iocb_iter_write()
fs: move permission hook out of do_iter_read()
fs: move permission hook out of do_iter_write()
fs: move file_start_write() into vfs_iter_write()
...
|
|
The IPv6 network stack first checks the sockaddr length (-EINVAL error)
before checking the family (-EAFNOSUPPORT error).
This was discovered thanks to commit a549d055a22e ("selftests/landlock:
Add network tests").
Cc: Eric Paris <eparis@parisplace.org>
Cc: Konstantin Meskhidze <konstantin.meskhidze@huawei.com>
Cc: Paul Moore <paul@paul-moore.com>
Cc: Stephen Smalley <stephen.smalley.work@gmail.com>
Reported-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Closes: https://lore.kernel.org/r/0584f91c-537c-4188-9e4f-04f192565667@collabora.com
Fixes: 0f8db8cc73df ("selinux: add AF_UNSPEC and INADDR_ANY checks to selinux_socket_bind()")
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Tested-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
When processing a packed profile in unpack_profile() described like
"profile :ns::samba-dcerpcd /usr/lib*/samba/{,samba/}samba-dcerpcd {...}"
a string ":samba-dcerpcd" is unpacked as a fully-qualified name and then
passed to aa_splitn_fqname().
aa_splitn_fqname() treats ":samba-dcerpcd" as only containing a namespace.
Thus it returns NULL for tmpname, meanwhile tmpns is non-NULL. Later
aa_alloc_profile() crashes as the new profile name is NULL now.
general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
CPU: 6 PID: 1657 Comm: apparmor_parser Not tainted 6.7.0-rc2-dirty #16
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.2-3-gd478f380-rebuilt.opensuse.org 04/01/2014
RIP: 0010:strlen+0x1e/0xa0
Call Trace:
<TASK>
? strlen+0x1e/0xa0
aa_policy_init+0x1bb/0x230
aa_alloc_profile+0xb1/0x480
unpack_profile+0x3bc/0x4960
aa_unpack+0x309/0x15e0
aa_replace_profiles+0x213/0x33c0
policy_update+0x261/0x370
profile_replace+0x20e/0x2a0
vfs_write+0x2af/0xe00
ksys_write+0x126/0x250
do_syscall_64+0x46/0xf0
entry_SYSCALL_64_after_hwframe+0x6e/0x76
</TASK>
---[ end trace 0000000000000000 ]---
RIP: 0010:strlen+0x1e/0xa0
It seems such behaviour of aa_splitn_fqname() is expected and checked in
other places where it is called (e.g. aa_remove_profiles). Well, there
is an explicit comment "a ns name without a following profile is allowed"
inside.
AFAICS, nothing can prevent unpacked "name" to be in form like
":samba-dcerpcd" - it is passed from userspace.
Deny the whole profile set replacement in such case and inform user with
EPROTO and an explaining message.
Found by Linux Verification Center (linuxtesting.org).
Fixes: 04dc715e24d0 ("apparmor: audit policy ns specified in policy load")
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Signed-off-by: John Johansen <john.johansen@canonical.com>
|
|
If we fail to unpack the transition table then the table elements which
have been already allocated are not freed on error path.
unreferenced object 0xffff88802539e000 (size 128):
comm "apparmor_parser", pid 903, jiffies 4294914938 (age 35.085s)
hex dump (first 32 bytes):
20 73 6f 6d 65 20 6e 61 73 74 79 20 73 74 72 69 some nasty stri
6e 67 20 73 6f 6d 65 20 6e 61 73 74 79 20 73 74 ng some nasty st
backtrace:
[<ffffffff81ddb312>] __kmem_cache_alloc_node+0x1e2/0x2d0
[<ffffffff81c47194>] __kmalloc_node_track_caller+0x54/0x170
[<ffffffff81c225b9>] kmemdup+0x29/0x60
[<ffffffff83e1ee65>] aa_unpack_strdup+0xe5/0x1b0
[<ffffffff83e20808>] unpack_pdb+0xeb8/0x2700
[<ffffffff83e23567>] unpack_profile+0x1507/0x4a30
[<ffffffff83e27bfa>] aa_unpack+0x36a/0x1560
[<ffffffff83e194c3>] aa_replace_profiles+0x213/0x33c0
[<ffffffff83de9461>] policy_update+0x261/0x370
[<ffffffff83de978e>] profile_replace+0x20e/0x2a0
[<ffffffff81eac8bf>] vfs_write+0x2af/0xe00
[<ffffffff81eaddd6>] ksys_write+0x126/0x250
[<ffffffff88f34fb6>] do_syscall_64+0x46/0xf0
[<ffffffff890000ea>] entry_SYSCALL_64_after_hwframe+0x6e/0x76
Call aa_free_str_table() on error path as was done before the blamed
commit. It implements all necessary checks, frees str_table if it is
available and nullifies the pointers.
Found by Linux Verification Center (linuxtesting.org).
Fixes: a0792e2ceddc ("apparmor: make transition table unpack generic so it can be reused")
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Signed-off-by: John Johansen <john.johansen@canonical.com>
|
|
Prevent move_mount from applying the attach_disconnected flag
to move_mount(). This prevents detached mounts from appearing
as / when applying mount mediation, which is not only incorrect
but could result in bad policy being generated.
Basic mount rules like
allow mount,
allow mount options=(move) -> /target/,
will allow detached mounts, allowing older policy to continue
to function. New policy gains the ability to specify `detached` as
a source option
allow mount detached -> /target/,
In addition make sure support of move_mount is advertised as
a feature to userspace so that applications that generate policy
can respond to the addition.
Note: this fixes mediation of move_mount when a detached mount is used,
it does not fix the broader regression of apparmor mediation of
mounts under the new mount api.
Link: https://lore.kernel.org/all/68c166b8-5b4d-4612-8042-1dee3334385b@leemhuis.info/T/#mb35fdde37f999f08f0b02d58dc1bf4e6b65b8da2
Fixes: 157a3537d6bc ("apparmor: Fix regression in mount mediation")
Reviewed-by: Georgia Garcia <georgia.garcia@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
|
|
policy_db objects are allocated with kzalloc() inside aa_alloc_pdb() and
are not cleared in the corresponding aa_free_pdb() function causing leak:
unreferenced object 0xffff88801f0a1400 (size 192):
comm "apparmor_parser", pid 1247, jiffies 4295122827 (age 2306.399s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<ffffffff81ddc612>] __kmem_cache_alloc_node+0x1e2/0x2d0
[<ffffffff81c47c55>] kmalloc_trace+0x25/0xc0
[<ffffffff83eb9a12>] aa_alloc_pdb+0x82/0x140
[<ffffffff83ec4077>] unpack_pdb+0xc7/0x2700
[<ffffffff83ec6b10>] unpack_profile+0x450/0x4960
[<ffffffff83ecc129>] aa_unpack+0x309/0x15e0
[<ffffffff83ebdb23>] aa_replace_profiles+0x213/0x33c0
[<ffffffff83e8d341>] policy_update+0x261/0x370
[<ffffffff83e8d66e>] profile_replace+0x20e/0x2a0
[<ffffffff81eadfaf>] vfs_write+0x2af/0xe00
[<ffffffff81eaf4c6>] ksys_write+0x126/0x250
[<ffffffff890fa0b6>] do_syscall_64+0x46/0xf0
[<ffffffff892000ea>] entry_SYSCALL_64_after_hwframe+0x6e/0x76
Free the pdbs inside aa_free_pdb(). While at it, rename the variable
representing an aa_policydb object to make the function more unified with
aa_pdb_free_kref() and aa_alloc_pdb().
Found by Linux Verification Center (linuxtesting.org).
Fixes: 98b824ff8984 ("apparmor: refcount the pdb")
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Signed-off-by: John Johansen <john.johansen@canonical.com>
|
|
This call is now going through a function pointer,
and it is not as obvious any more that it will be inlined.
Signed-off-by: Günther Noack <gnoack@google.com>
Link: https://lore.kernel.org/r/20231208155121.1943775-4-gnoack@google.com
Fixes: 7a11275c3787 ("landlock: Refactor layer helpers")
Signed-off-by: Mickaël Salaün <mic@digikod.net>
|
|
For module-internal static functions, compilers are already in a good
position to decide whether to inline them or not.
Suggested-by: Mickaël Salaün <mic@digikod.net>
Signed-off-by: Günther Noack <gnoack@google.com>
Link: https://lore.kernel.org/r/20231208155121.1943775-2-gnoack@google.com
[mic: Split patch for Linux 6.6]
Signed-off-by: Mickaël Salaün <mic@digikod.net>
|
|
For module-internal static functions, compilers are already in a good
position to decide whether to inline them or not.
Suggested-by: Mickaël Salaün <mic@digikod.net>
Signed-off-by: Günther Noack <gnoack@google.com>
Link: https://lore.kernel.org/r/20231208155121.1943775-2-gnoack@google.com
[mic: Split patch for Linux 6.1]
Signed-off-by: Mickaël Salaün <mic@digikod.net>
|
|
For module-internal static functions, compilers are already in a good
position to decide whether to inline them or not.
Suggested-by: Mickaël Salaün <mic@digikod.net>
Signed-off-by: Günther Noack <gnoack@google.com>
Link: https://lore.kernel.org/r/20231208155121.1943775-2-gnoack@google.com
[mic: Split patch for Linux 5.15]
Signed-off-by: Mickaël Salaün <mic@digikod.net>
|
|
apparmor_task_kill was not putting the task_cred reference tc, or the
cred_label reference tc when dealing with a passed in cred, fix this
by using a single fn exit.
Fixes: 90c436a64a6e ("apparmor: pass cred through to audit info.")
Signed-off-by: John Johansen <john.johansen@canonical.com>
|
|
Some ioctl commands do not require ioctl permission, but are routed to
other permissions such as FILE_GETATTR or FILE_SETATTR. This routing is
done by comparing the ioctl cmd to a set of 64-bit flags (FS_IOC_*).
However, if a 32-bit process is running on a 64-bit kernel, it emits
32-bit flags (FS_IOC32_*) for certain ioctl operations. These flags are
being checked erroneously, which leads to these ioctl operations being
routed to the ioctl permission, rather than the correct file
permissions.
This was also noted in a RED-PEN finding from a while back -
"/* RED-PEN how should LSM module know it's handling 32bit? */".
This patch introduces a new hook, security_file_ioctl_compat(), that is
called from the compat ioctl syscall. All current LSMs have been changed
to support this hook.
Reviewing the three places where we are currently using
security_file_ioctl(), it appears that only SELinux needs a dedicated
compat change; TOMOYO and SMACK appear to be functional without any
change.
Cc: stable@vger.kernel.org
Fixes: 0b24dcb7f2f7 ("Revert "selinux: simplify ioctl checking"")
Signed-off-by: Alfred Piccioni <alpic@google.com>
Reviewed-by: Stephen Smalley <stephen.smalley.work@gmail.com>
[PM: subject tweak, line length fixes, and alignment corrections]
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
As part of on ongoing effort to perform more automated testing and
provide more tools for individual developers to validate their
patches before submitting, we are trying to make our code
"clang-format clean". My hope is that once we have fixed all of our
style "quirks", developers will be able to run clang-format on their
patches to help avoid silly formatting problems and ensure their
changes fit in well with the rest of the SELinux kernel code.
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
As part of on ongoing effort to perform more automated testing and
provide more tools for individual developers to validate their
patches before submitting, we are trying to make our code
"clang-format clean". My hope is that once we have fixed all of our
style "quirks", developers will be able to run clang-format on their
patches to help avoid silly formatting problems and ensure their
changes fit in well with the rest of the SELinux kernel code.
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
As part of on ongoing effort to perform more automated testing and
provide more tools for individual developers to validate their
patches before submitting, we are trying to make our code
"clang-format clean". My hope is that once we have fixed all of our
style "quirks", developers will be able to run clang-format on their
patches to help avoid silly formatting problems and ensure their
changes fit in well with the rest of the SELinux kernel code.
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
As part of on ongoing effort to perform more automated testing and
provide more tools for individual developers to validate their
patches before submitting, we are trying to make our code
"clang-format clean". My hope is that once we have fixed all of our
style "quirks", developers will be able to run clang-format on their
patches to help avoid silly formatting problems and ensure their
changes fit in well with the rest of the SELinux kernel code.
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
As part of on ongoing effort to perform more automated testing and
provide more tools for individual developers to validate their
patches before submitting, we are trying to make our code
"clang-format clean". My hope is that once we have fixed all of our
style "quirks", developers will be able to run clang-format on their
patches to help avoid silly formatting problems and ensure their
changes fit in well with the rest of the SELinux kernel code.
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
As part of on ongoing effort to perform more automated testing and
provide more tools for individual developers to validate their
patches before submitting, we are trying to make our code
"clang-format clean". My hope is that once we have fixed all of our
style "quirks", developers will be able to run clang-format on their
patches to help avoid silly formatting problems and ensure their
changes fit in well with the rest of the SELinux kernel code.
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
As part of on ongoing effort to perform more automated testing and
provide more tools for individual developers to validate their
patches before submitting, we are trying to make our code
"clang-format clean". My hope is that once we have fixed all of our
style "quirks", developers will be able to run clang-format on their
patches to help avoid silly formatting problems and ensure their
changes fit in well with the rest of the SELinux kernel code.
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
As part of on ongoing effort to perform more automated testing and
provide more tools for individual developers to validate their
patches before submitting, we are trying to make our code
"clang-format clean". My hope is that once we have fixed all of our
style "quirks", developers will be able to run clang-format on their
patches to help avoid silly formatting problems and ensure their
changes fit in well with the rest of the SELinux kernel code.
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
As part of on ongoing effort to perform more automated testing and
provide more tools for individual developers to validate their
patches before submitting, we are trying to make our code
"clang-format clean". My hope is that once we have fixed all of our
style "quirks", developers will be able to run clang-format on their
patches to help avoid silly formatting problems and ensure their
changes fit in well with the rest of the SELinux kernel code.
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
