| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Linux 3.8-rc6
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Peter Anvin:
"This is a collection of miscellaneous fixes, the most important one is
the fix for the Samsung laptop bricking issue (auto-blacklisting the
samsung-laptop driver); the efi_enabled() changes you see below are
prerequisites for that fix.
The other issues fixed are booting on OLPC XO-1.5, an UV fix, NMI
debugging, and requiring CAP_SYS_RAWIO for MSR references, just as
with I/O port references."
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
samsung-laptop: Disable on EFI hardware
efi: Make 'efi_enabled' a function to query EFI facilities
smp: Fix SMP function call empty cpu mask race
x86/msr: Add capabilities check
x86/dma-debug: Bump PREALLOC_DMA_DEBUG_ENTRIES
x86/olpc: Fix olpc-xo1-sci.c build errors
arch/x86/platform/uv: Fix incorrect tlb flush all issue
x86-64: Fix unwind annotations in recent NMI changes
x86-32: Start out cr0 clean, disable paging before modifying cr3/4
|
|
This reverts commit daee779718a319ff9f83e1ba3339334ac650bb22.
I'll requeue this after the console locking fixes, so lockdep
is useful again for people until fbcon is fixed.
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
I get the following warning every day with v3.7, once or
twice a day:
[ 2235.186027] WARNING: at /mnt/sda7/kernel/linux/arch/x86/kernel/apic/ipi.c:109 default_send_IPI_mask_logical+0x2f/0xb8()
As explained by Linus as well:
|
| Once we've done the "list_add_rcu()" to add it to the
| queue, we can have (another) IPI to the target CPU that can
| now see it and clear the mask.
|
| So by the time we get to actually send the IPI, the mask might
| have been cleared by another IPI.
|
This patch also fixes a system hang problem, if the data->cpumask
gets cleared after passing this point:
if (WARN_ONCE(!mask, "empty IPI mask"))
return;
then the problem in commit 83d349f35e1a ("x86: don't send an IPI to
the empty set of CPU's") will happen again.
Signed-off-by: Wang YanQing <udknight@gmail.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Jan Beulich <jbeulich@suse.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: peterz@infradead.org
Cc: mina86@mina86.org
Cc: srivatsa.bhat@linux.vnet.ibm.com
Cc: <stable@kernel.org>
Link: http://lkml.kernel.org/r/20130126075357.GA3205@udknight
[ Tidied up the changelog and the comment in the code. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Linux 3.8-rc5
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
Commit 083b804c4d3e ("async: use workqueue for worker pool") made it
possible that async jobs are moved from pending to running out-of-order.
While pending async jobs will be queued and dispatched for execution in
the same order, nothing guarantees they'll enter "1) move self to the
running queue" of async_run_entry_fn() in the same order.
Before the conversion, async implemented its own worker pool. An async
worker, upon being woken up, fetches the first item from the pending
list, which kept the executing lists sorted. The conversion to
workqueue was done by adding work_struct to each async_entry and async
just schedules the work item. The queueing and dispatching of such work
items are still in order but now each worker thread is associated with a
specific async_entry and moves that specific async_entry to the
executing list. So, depending on which worker reaches that point
earlier, which is non-deterministic, we may end up moving an async_entry
with larger cookie before one with smaller one.
This broke __lowest_in_progress(). running->domain may not be properly
sorted and is not guaranteed to contain lower cookies than pending list
when not empty. Fix it by ensuring sort-inserting to the running list
and always looking at both pending and running when trying to determine
the lowest cookie.
Over time, the async synchronization implementation became quite messy.
We better restructure it such that each async_entry is linked to two
lists - one global and one per domain - and not move it when execution
starts. There's no reason to distinguish pending and running. They
behave the same for synchronization purposes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull ftrace fix from Steven Rostedt:
"Kprobes now uses the function tracer if it can. That is, if a probe
is placed on a function mcount/nop location, and the arch supports it,
instead of adding a breakpoint, kprobes will register a function
callback as that is much more efficient.
The function tracer requires to update modules before they run, and
uses the module notifier to do so. But if something else in the
module notifiers registers a kprobe at one of these locations, before
ftrace can get to it, then the system could fail.
The function tracer must be initialized early, otherwise module
notifiers that probe will only work by chance."
* tag 'trace-3.8-rc4-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
ftrace: Be first to run code modification on modules
|
|
wake_up_process() should never wakeup a TASK_STOPPED/TRACED task.
Change it to use TASK_NORMAL and add the WARN_ON().
TASK_ALL has no other users, probably can be killed.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
putreg() assumes that the tracee is not running and pt_regs_access() can
safely play with its stack. However a killed tracee can return from
ptrace_stop() to the low-level asm code and do RESTORE_REST, this means
that debugger can actually read/modify the kernel stack until the tracee
does SAVE_REST again.
set_task_blockstep() can race with SIGKILL too and in some sense this
race is even worse, the very fact the tracee can be woken up breaks the
logic.
As Linus suggested we can clear TASK_WAKEKILL around the arch_ptrace()
call, this ensures that nobody can ever wakeup the tracee while the
debugger looks at it. Not only this fixes the mentioned problems, we
can do some cleanups/simplifications in arch_ptrace() paths.
Probably ptrace_unfreeze_traced() needs more callers, for example it
makes sense to make the tracee killable for oom-killer before
access_process_vm().
While at it, add the comment into may_ptrace_stop() to explain why
ptrace_stop() still can't rely on SIGKILL and signal_pending_state().
Reported-by: Salman Qazi <sqazi@google.com>
Reported-by: Suleiman Souhlal <suleiman@google.com>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Cleanup and preparation for the next change.
signal_wake_up(resume => true) is overused. None of ptrace/jctl callers
actually want to wakeup a TASK_WAKEKILL task, but they can't specify the
necessary mask.
Turn signal_wake_up() into signal_wake_up_state(state), reintroduce
signal_wake_up() as a trivial helper, and add ptrace_signal_wake_up()
which adds __TASK_TRACED.
This way ptrace_signal_wake_up() can work "inside" ptrace_request()
even if the tracee doesn't have the TASK_WAKEKILL bit set.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
If some other kernel subsystem has a module notifier, and adds a kprobe
to a ftrace mcount point (now that kprobes work on ftrace points),
when the ftrace notifier runs it will fail and disable ftrace, as well
as kprobes that are attached to ftrace points.
Here's the error:
WARNING: at kernel/trace/ftrace.c:1618 ftrace_bug+0x239/0x280()
Hardware name: Bochs
Modules linked in: fat(+) stap_56d28a51b3fe546293ca0700b10bcb29__8059(F) nfsv4 auth_rpcgss nfs dns_resolver fscache xt_nat iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack lockd sunrpc ppdev parport_pc parport microcode virtio_net i2c_piix4 drm_kms_helper ttm drm i2c_core [last unloaded: bid_shared]
Pid: 8068, comm: modprobe Tainted: GF 3.7.0-0.rc8.git0.1.fc19.x86_64 #1
Call Trace:
[<ffffffff8105e70f>] warn_slowpath_common+0x7f/0xc0
[<ffffffff81134106>] ? __probe_kernel_read+0x46/0x70
[<ffffffffa0180000>] ? 0xffffffffa017ffff
[<ffffffffa0180000>] ? 0xffffffffa017ffff
[<ffffffff8105e76a>] warn_slowpath_null+0x1a/0x20
[<ffffffff810fd189>] ftrace_bug+0x239/0x280
[<ffffffff810fd626>] ftrace_process_locs+0x376/0x520
[<ffffffff810fefb7>] ftrace_module_notify+0x47/0x50
[<ffffffff8163912d>] notifier_call_chain+0x4d/0x70
[<ffffffff810882f8>] __blocking_notifier_call_chain+0x58/0x80
[<ffffffff81088336>] blocking_notifier_call_chain+0x16/0x20
[<ffffffff810c2a23>] sys_init_module+0x73/0x220
[<ffffffff8163d719>] system_call_fastpath+0x16/0x1b
---[ end trace 9ef46351e53bbf80 ]---
ftrace failed to modify [<ffffffffa0180000>] init_once+0x0/0x20 [fat]
actual: cc:bb:d2:4b:e1
A kprobe was added to the init_once() function in the fat module on load.
But this happened before ftrace could have touched the code. As ftrace
didn't run yet, the kprobe system had no idea it was a ftrace point and
simply added a breakpoint to the code (0xcc in the cc:bb:d2:4b:e1).
Then when ftrace went to modify the location from a call to mcount/fentry
into a nop, it didn't see a call op, but instead it saw the breakpoint op
and not knowing what to do with it, ftrace shut itself down.
The solution is to simply give the ftrace module notifier the max priority.
This should have been done regardless, as the core code ftrace modification
also happens very early on in boot up. This makes the module modification
closer to core modification.
Link: http://lkml.kernel.org/r/20130107140333.593683061@goodmis.org
Cc: stable@vger.kernel.org
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Reported-by: Frank Ch. Eigler <fche@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
Commit 1fb9341ac348 ("module: put modules in list much earlier") moved
some of the module initialization code around, and in the process
changed the exit paths too. But for the duplicate export symbol error
case the change made the ddebug_cleanup path jump to after the module
mutex unlock, even though it happens with the mutex held.
Rusty has some patches to split this function up into some helper
functions, hopefully the mess of complex goto targets will go away
eventually.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux
Pull module fixes and a virtio block fix from Rusty Russell:
"Various minor fixes, but a slightly more complex one to fix the
per-cpu overload problem introduced recently by kvm id changes."
* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux:
module: put modules in list much earlier.
module: add new state MODULE_STATE_UNFORMED.
module: prevent warning when finit_module a 0 sized file
virtio-blk: Don't free ida when disk is in use
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal
Pull misc syscall fixes from Al Viro:
- compat syscall fixes (discussed back in December)
- a couple of "make life easier for sigaltstack stuff by reducing
inter-tree dependencies"
- fix up compiler/asmlinkage calling convention disagreement of
sys_clone()
- misc
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal:
sys_clone() needs asmlinkage_protect
make sure that /linuxrc has std{in,out,err}
x32: fix sigtimedwait
x32: fix waitid()
switch compat_sys_wait4() and compat_sys_waitid() to COMPAT_SYSCALL_DEFINE
switch compat_sys_sigaltstack() to COMPAT_SYSCALL_DEFINE
CONFIG_GENERIC_SIGALTSTACK build breakage with asm-generic/syscalls.h
Ensure that kernel_init_freeable() is not inlined into non __init code
|
|
The ia64 function "thread_matches()" has no users since commit
e868a55c2a8c ("[IA64] remove find_thread_for_addr()"). Remove it.
This allows us to make ptrace_check_attach() static to kernel/ptrace.c,
which is good since we'll need to change the semantics of it and fix up
all the callers.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Cc: stable@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
If the default iosched is built as module, the kernel may deadlock
while trying to load the iosched module on device probe if the probing
was running off async. This is because async_synchronize_full() at
the end of module init ends up waiting for the async job which
initiated the module loading.
async A modprobe
1. finds a device
2. registers the block device
3. request_module(default iosched)
4. modprobe in userland
5. load and init module
6. async_synchronize_full()
Async A waits for modprobe to finish in request_module() and modprobe
waits for async A to finish in async_synchronize_full().
Because there's no easy to track dependency once control goes out to
userland, implementing properly nested flushing is difficult. For
now, make module init perform async_synchronize_full() iff module init
has queued async jobs as suggested by Linus.
This avoids the described deadlock because iosched module doesn't use
async and thus wouldn't invoke async_synchronize_full(). This is
hacky and incomplete. It will deadlock if async module loading nests;
however, this works around the known problem case and seems to be the
best of bad options.
For more details, please refer to the following thread.
http://thread.gmane.org/gmane.linux.kernel/1420814
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Alex Riesen <raa.lkml@gmail.com>
Tested-by: Ming Lei <ming.lei@canonical.com>
Tested-by: Alex Riesen <raa.lkml@gmail.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing regression fixes from Steven Rostedt:
"The clean up patch commit 0fb9656d957d "tracing: Make tracing_enabled
be equal to tracing_on" caused two regressions.
1) The irqs off latency tracer no longer starts if tracing_on is off
when the tracer is set, and then tracing_on is enabled. The
tracing_on file needs the hook that tracing_enabled had to enable
tracers if they request it (call the tracer's start() method).
2) That commit had a separate change that really should have been a
separate patch, but it must have been added accidently with the -a
option of git commit. But as the change is still related to the
commit it wasn't noticed in review. That change, changed the way
blocking is done by the trace_pipe file with respect to the
tracing_on settings. I've been told that this change breaks
current userspace, and this specific change is being reverted."
* tag 'trace-3.8-rc3-regression-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Fix regression of trace_pipe
tracing: Fix regression with irqsoff tracer and tracing_on file
|
|
Clockevent cleanup series from Shawn Guo.
Resolved move/change conflict in mach-pxa/time.c due to the sys_timer
cleanup.
* clocksource/cleanup:
clocksource: use clockevents_config_and_register() where possible
ARM: use clockevents_config_and_register() where possible
clockevents: export clockevents_config_and_register for module use
+ sync to Linux 3.8-rc3
Signed-off-by: Olof Johansson <olof@lixom.net>
Conflicts:
arch/arm/mach-pxa/time.c
|
|
Commit 0fb9656d "tracing: Make tracing_enabled be equal to tracing_on"
changes the behaviour of trace_pipe, ie. it makes trace_pipe return if
we've read something and tracing is enabled, and this means that we have
to 'cat trace_pipe' again and again while running tests.
IMO the right way is if tracing is enabled, we always block and wait for
ring buffer, or we may lose what we want since ring buffer's size is limited.
Link: http://lkml.kernel.org/r/1358132051-5410-1-git-send-email-bo.li.liu@oracle.com
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
clockevents_config_and_register is a handy helper for clockevent
drivers, some of which might support module build, so export the symbol.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
Prarit's excellent bug report:
> In recent Fedora releases (F17 & F18) some users have reported seeing
> messages similar to
>
> [ 15.478160] kvm: Could not allocate 304 bytes percpu data
> [ 15.478174] PERCPU: allocation failed, size=304 align=32, alloc from
> reserved chunk failed
>
> during system boot. In some cases, users have also reported seeing this
> message along with a failed load of other modules.
>
> What is happening is systemd is loading an instance of the kvm module for
> each cpu found (see commit e9bda3b). When the module load occurs the kernel
> currently allocates the modules percpu data area prior to checking to see
> if the module is already loaded or is in the process of being loaded. If
> the module is already loaded, or finishes load, the module loading code
> releases the current instance's module's percpu data.
Now we have a new state MODULE_STATE_UNFORMED, we can insert the
module into the list (and thus guarantee its uniqueness) before we
allocate the per-cpu region.
Reported-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Tested-by: Prarit Bhargava <prarit@redhat.com>
|
|
You should never look at such a module, so it's excised from all paths
which traverse the modules list.
We add the state at the end, to avoid gratuitous ABI break (ksplice).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
|
|
audit_log_start() performs the same jiffies comparison in two places.
If sufficient time has elapsed between the two comparisons, the second
one produces a negative sleep duration:
schedule_timeout: wrong timeout value fffffffffffffff0
Pid: 6606, comm: trinity-child1 Not tainted 3.8.0-rc1+ #43
Call Trace:
schedule_timeout+0x305/0x340
audit_log_start+0x311/0x470
audit_log_exit+0x4b/0xfb0
__audit_syscall_exit+0x25f/0x2c0
sysret_audit+0x17/0x21
Fix it by performing the comparison a single time.
Reported-by: Dave Jones <davej@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Eric Paris <eparis@redhat.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
It's possible for audit_log_start() to return NULL. Handle it in the
various callers.
Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Eric Paris <eparis@redhat.com>
Cc: Jeff Layton <jlayton@redhat.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Julien Tinnes <jln@google.com>
Cc: Will Drewry <wad@google.com>
Cc: Steve Grubb <sgrubb@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The seccomp path was using AUDIT_ANOM_ABEND from when seccomp mode 1
could only kill a process. While we still want to make sure an audit
record is forced on a kill, this should use a separate record type since
seccomp mode 2 introduces other behaviors.
In the case of "handled" behaviors (process wasn't killed), only emit a
record if the process is under inspection. This change also fixes
userspace examination of seccomp audit events, since it was considered
malformed due to missing fields of the AUDIT_ANOM_ABEND event type.
Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Eric Paris <eparis@redhat.com>
Cc: Jeff Layton <jlayton@redhat.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Julien Tinnes <jln@google.com>
Acked-by: Will Drewry <wad@chromium.org>
Acked-by: Steve Grubb <sgrubb@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
down_write_nest_lock() provides a means to annotate locking scenario
where an outer lock is guaranteed to serialize the order nested locks
are being acquired.
This is analogoue to already existing mutex_lock_nest_lock() and
spin_lock_nest_lock().
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Cc: Rik van Riel <riel@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mel Gorman <mel@csn.ul.ie>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Commit 02404baf1b47 "tracing: Remove deprecated tracing_enabled file"
removed the tracing_enabled file as it never worked properly and
the tracing_on file should be used instead. But the tracing_on file
didn't call into the tracers start/stop routines like the
tracing_enabled file did. This caused trace-cmd to break when it
enabled the irqsoff tracer.
If you just did "echo irqsoff > current_tracer" then it would work
properly. But the tool trace-cmd disables tracing first by writing
"0" into the tracing_on file. Then it writes "irqsoff" into
current_tracer and then writes "1" into tracing_on. Unfortunately,
the above commit changed the irqsoff tracer to check the tracing_on
status instead of the tracing_enabled status. If it's disabled then
it does not start the tracer internals.
The problem is that writing "1" into tracing_on does not call the
tracers "start" routine like writing "1" into tracing_enabled did.
This makes the irqsoff tracer not start when using the trace-cmd
tool, and is a regression for userspace.
Simple fix is to have the tracing_on file call the tracers start()
method when being enabled (and the stop() method when disabled).
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
Fix new kernel-doc warning in auditfilter.c:
Warning(kernel/auditfilter.c:1157): Excess function parameter 'uid' description in 'audit_receive_filter'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Eric Paris <eparis@redhat.com>
Cc: linux-audit@redhat.com (subscribers-only)
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing regression fix from Steven Rostedt:
"A change that came in this merge window broke the writing to the
trace_options file. It causes garbage to be read during the compare
of option names, and breaks setting options via the trace_options
file, although options can still be set via the options/<option>
files."
* tag 'trace-3.8-rc2-regression-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Fix regression of trace_options file setting
|
|
The latest change to allow trace options to be set on the command
line also broke the trace_options file.
The zeroing of the last byte of the option name that is echoed into
the trace_option file was removed with the consolidation of some
of the code. The compare between the option and what was written to
the trace_options file fails because the string holding the data
written doesn't terminate with a null character.
A zero needs to be added to the end of the string copied from
user space.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra into next/cleanup
From Stephen Warren:
ARM/...: timer and clock events cleanup, and remove struct sys_timer
This branch contains a number of cleanups and unifications to various
timer- clock-events- and ARM timer code. The main points are:
1) Convert arch_gettimeoffset to a pointer, so that architectures with
multiple timer implementations can simply set this standard pointer
rather than maintaining their own arch-specific pointers for the
same purpose. Various architectures are converted to using this new
feature.
2) Conversion of ARM timer implementations to use clock_event_devices's
suspend/resume operations, rather than the ARM-specific sys_timer
versions. Thus, the ARM code begins to use more common infra-structure
rather than arch-specific code.
3) Removal of ARM's struct sys_timer completely, now that everything uses
common code.
4) Introduction of drivers/clocksource/clksrc-of.c, which allows ARM clock
source implementations to be moved into drivers/clocksource, with the
need to add SoC-specific header files for each timer initialization
function; instead, all enabled implementations are registered into a
table which a single core function iterates over, and calls the
relevant initialization functions based on device tree. At least the
Tegra and BCM2835 clocksource implementations will use this feature in
the 3.9 kernel cycle.
* tag 'swarren-for-3.9-arm-timer-rework' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra:
clocksource: add common of_clksrc_init() function
ARM: delete struct sys_timer
ARM: remove struct sys_timer suspend and resume fields
ARM: samsung: register syscore_ops for timer resume directly
ARM: ux500: convert timer suspend/resume to clock_event_device
ARM: sa1100: convert timer suspend/resume to clock_event_device
ARM: pxa: convert timer suspend/resume to clock_event_device
ARM: at91: convert timer suspend/resume to clock_event_device
ARM: set arch_gettimeoffset directly
m68k: set arch_gettimeoffset directly
time: convert arch_gettimeoffset to a pointer
cris: move usec/nsec conversion to do_slow_gettimeoffset
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
Merge emailed fixes from Andrew Morton:
"Bunch of fixes:
- delayed IPC updates. I held back on this because of some possible
outstanding bug reports, but they appear to have been addressed in
later versions
- A bunch of MAINTAINERS updates
- Yet Another RTC driver. I'd held this back while a couple of
little issues were being worked out.
I'm expecting an intrusive-but-simple patchset from Joe Perches which
splits up printk.c into kernel/printk/*. That will be a pig to
maintain for two months so if it passes testing I'd like to get it
upstream after a week or so."
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (35 commits)
printk: fix incorrect length from print_time() when seconds > 99999
drivers/rtc/rtc-vt8500.c: fix handling of data passed in struct rtc_time
drivers/rtc/rtc-vt8500.c: correct handling of CR_24H bitfield
rtc: add RTC driver for TPS6586x
MAINTAINERS: fix drivers/staging/sm7xx/
MAINTAINERS: remove include/linux/of_pwm.h
MAINTAINERS: remove arch/*/lib/perf_event*.c
MAINTAINERS: remove drivers/mmc/host/imxmmc.*
MAINTAINERS: fix Documentation/mei/
MAINTAINERS: remove arch/x86/platform/mrst/pmu.*
MAINTAINERS: remove firmware/isci/
MAINTAINERS: fix drivers/ieee802154/
MAINTAINERS: fix .../plat-mxc/include/mach/imxfb.h
MAINTAINERS: remove drivers/video/epson1355fb.c
MAINTAINERS: fix drivers/media/usb/dvb-usb/cxusb*
MAINTAINERS: adjust for UAPI
MAINTAINERS: fix drivers/media/platform/atmel-isi.c
MAINTAINERS: fix arch/arm/mach-at91/include/mach/at_hdmac.h
MAINTAINERS: fix drivers/rtc/rtc-vt8500.c
MAINTAINERS: remove arch/arm/plat-s5p/
...
|
|
Cleanup. And I think we need more cleanups, in particular
__set_current_blocked() and sigprocmask() should die. Nobody should
ever block SIGKILL or SIGSTOP.
- Change set_current_blocked() to use __set_current_blocked()
- Change sys_sigprocmask() to use set_current_blocked(), this way it
should not worry about SIGKILL/SIGSTOP.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Commit 77097ae503b1 ("most of set_current_blocked() callers want
SIGKILL/SIGSTOP removed from set") removed the initialization of newmask
by accident, causing ltp to complain like this:
ssetmask01 1 TFAIL : sgetmask() failed: TEST_ERRNO=???(0): Success
Restore the proper initialization.
Reported-and-tested-by: CAI Qian <caiqian@redhat.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: stable@kernel.org # v3.5+
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
print_prefix() passes a NULL buf to print_time() to get the length of
the time prefix; when printk times are enabled, the current code just
returns the constant 15, which matches the format "[%5lu.%06lu] " used
to print the time value. However, this is obviously incorrect when the
whole seconds part of the time gets beyond 5 digits (100000 seconds is a
bit more than a day of uptime).
The simple fix is to use snprintf(NULL, 0, ...) to calculate the actual
length of the time prefix. This could be micro-optimized but it seems
better to have simpler, more readable code here.
The bug leads to the syslog system call miscomputing which messages fit
into the userspace buffer. If there are enough messages to fill
log_buf_len and some have a timestamp >= 100000, dmesg may fail with:
# dmesg
klogctl: Bad address
When this happens, strace shows that the failure is indeed EFAULT due to
the kernel mistakenly accessing past the end of dmesg's buffer, since
dmesg asks the kernel how big a buffer it needs, allocates a bit more,
and then gets an error when it asks the kernel to fill it:
syslog(0xa, 0, 0) = 1048576
mmap(NULL, 1052672, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7fa4d25d2000
syslog(0x3, 0x7fa4d25d2010, 0x100008) = -1 EFAULT (Bad address)
As far as I can see, the bug has been there as long as print_time(),
which comes from commit 084681d14e42 ("printk: flush continuation lines
immediately to console") in 3.5-rc5.
Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Joe Perches <joe@perches.com>
Cc: Sylvain Munaut <s.munaut@whatever-company.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
If we try to finit_module on a file sized 0 bytes vmalloc will
scream and spit out a warning.
Since modules have to be bigger than 0 bytes anyways we can just
check that beforehand and avoid the warning.
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
|
|
It needs 64bit timespec. As it is, we end up truncating the timeout
to whole seconds; usually it doesn't matter, but for having all
sub-second timeouts truncated to one jiffy is visibly wrong.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
It needs 64bit rusage and 32bit siginfo. glibc never calls it with
non-NULL rusage pointer, or we would've seen breakage already...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Strictly speaking, ppc64 needs it for C ABI compliance. Realistically
I would be very surprised if e.g. passing 0xffffffff as 'options'
argument to waitid() from 32bit task would cause problems, but yes,
it puts us into undefined behaviour territory. ppc64 expects int
argument to be passed in 64bit register with bits 31..63 containing
the same value. SYSCALL_DEFINE on ppc provides a wrapper that normalizes
the value passed from userland; so does COMPAT_SYSCALL_DEFINE. Plain
declaration of compat_sys_something() with an int argument obviously
doesn't. Again, for wait4 and waitid I would be extremely surprised
if gcc started to produce code depending on that value having been
properly sign-extended - the argument(s) in question end up passed
blindly to sys_wait4 and sys_waitid resp. and normalization for native
syscalls takes care of their use there. Still, better to use
COMPAT_SYSCALL_DEFINE here than worry about nasal daemons...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Makes sigaltstack conversion easier to split into per-architecture
parts.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Oleg pointed out that in a pid namespace the sequence.
- pid 1 becomes a zombie
- setns(thepidns), fork,...
- reaping pid 1.
- The injected processes exiting.
Can lead to processes attempting access their child reaper and
instead following a stale pointer.
That waitpid for init can return before all of the processes in
the pid namespace have exited is also unfortunate.
Avoid these problems by disabling the allocation of new pids in a pid
namespace when init dies, instead of when the last process in a pid
namespace is reaped.
Pointed-out-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
|
The sequence:
unshare(CLONE_NEWPID)
clone(CLONE_THREAD|CLONE_SIGHAND|CLONE_VM)
Creates a new process in the new pid namespace without setting
pid_ns->child_reaper. After forking this results in a NULL
pointer dereference.
Avoid this and other nonsense scenarios that can show up after
creating a new pid namespace with unshare by adding a new
check in copy_prodcess.
Pointed-out-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
|
Currently, whenever CONFIG_ARCH_USES_GETTIMEOFFSET is enabled, each
arch core provides a single implementation of arch_gettimeoffset(). In
many cases, different sub-architectures, different machines, or
different timer providers exist, and so the arch ends up implementing
arch_gettimeoffset() as a call-through-pointer anyway. Examples are
ARM, Cris, M68K, and it's arguable that the remaining architectures,
M32R and Blackfin, should be doing this anyway.
Modify arch_gettimeoffset so that it itself is a function pointer, which
the arch initializes. This will allow later changes to move the
initialization of this function into individual machine support or timer
drivers. This is particularly useful for code in drivers/clocksource
which should rely on an arch-independant mechanism to register their
implementation of arch_gettimeoffset().
This patch also converts the Cris architecture to set arch_gettimeoffset
directly to the final implementation in time_init(), because Cris already
had separate time_init() functions per sub-architecture. M68K and ARM
are converted to set arch_gettimeoffset to the final implementation in
later patches, because they already have function pointers in place for
this purpose.
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Mikael Starvik <starvik@axis.com>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Acked-by: John Stultz <johnstul@us.ibm.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
|
|
Pull filesystem notification updates from Eric Paris:
"This pull mostly is about locking changes in the fsnotify system. By
switching the group lock from a spin_lock() to a mutex() we can now
hold the lock across things like iput(). This fixes a problem
involving unmounting a fs and having inodes be busy, first pointed out
by FAT, but reproducible with tmpfs.
This also restores signal driven I/O for inotify, which has been
broken since about 2.6.32."
Ugh. I *hate* the timing of this. It was rebased after the merge
window opened, and then left to sit with the pull request coming the day
before the merge window closes. That's just crap. But apparently the
patches themselves have been around for over a year, just gathering
dust, so now it's suddenly critical.
Fixed up semantic conflict in fs/notify/fdinfo.c as per Stephen
Rothwell's fixes from -next.
* 'for-next' of git://git.infradead.org/users/eparis/notify:
inotify: automatically restart syscalls
inotify: dont skip removal of watch descriptor if creation of ignored event failed
fanotify: dont merge permission events
fsnotify: make fasync generic for both inotify and fanotify
fsnotify: change locking order
fsnotify: dont put marks on temporary list when clearing marks by group
fsnotify: introduce locked versions of fsnotify_add_mark() and fsnotify_remove_mark()
fsnotify: pass group to fsnotify_destroy_mark()
fsnotify: use a mutex instead of a spinlock to protect a groups mark list
fanotify: add an extra flag to mark_remove_from_mask that indicates wheather a mark should be destroyed
fsnotify: take groups mark_lock before mark lock
fsnotify: use reference counting for groups
fsnotify: introduce fsnotify_get_group()
inotify, fanotify: replace fsnotify_put_group() with fsnotify_destroy_group()
|
|
Merge the rest of Andrew's patches for -rc1:
"A bunch of fixes and misc missed-out-on things.
That'll do for -rc1. I still have a batch of IPC patches which still
have a possible bug report which I'm chasing down."
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (25 commits)
keys: use keyring_alloc() to create module signing keyring
keys: fix unreachable code
sendfile: allows bypassing of notifier events
SGI-XP: handle non-fatal traps
fat: fix incorrect function comment
Documentation: ABI: remove testing/sysfs-devices-node
proc: fix inconsistent lock state
linux/kernel.h: fix DIV_ROUND_CLOSEST with unsigned divisors
memcg: don't register hotcpu notifier from ->css_alloc()
checkpatch: warn on uapi #includes that #include <uapi/...
revert "rtc: recycle id when unloading a rtc driver"
mm: clean up transparent hugepage sysfs error messages
hfsplus: add error message for the case of failure of sync fs in delayed_sync_fs() method
hfsplus: rework processing of hfs_btree_write() returned error
hfsplus: rework processing errors in hfsplus_free_extents()
hfsplus: avoid crash on failed block map free
kcmp: include linux/ptrace.h
drivers/rtc/rtc-imxdi.c: must include <linux/spinlock.h>
mm: cma: WARN if freed memory is still in use
exec: do not leave bprm->interp on stack
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal
Pull signal handling cleanups from Al Viro:
"sigaltstack infrastructure + conversion for x86, alpha and um,
COMPAT_SYSCALL_DEFINE infrastructure.
Note that there are several conflicts between "unify
SS_ONSTACK/SS_DISABLE definitions" and UAPI patches in mainline;
resolution is trivial - just remove definitions of SS_ONSTACK and
SS_DISABLED from arch/*/uapi/asm/signal.h; they are all identical and
include/uapi/linux/signal.h contains the unified variant."
Fixed up conflicts as per Al.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal:
alpha: switch to generic sigaltstack
new helpers: __save_altstack/__compat_save_altstack, switch x86 and um to those
generic compat_sys_sigaltstack()
introduce generic sys_sigaltstack(), switch x86 and um to it
new helper: compat_user_stack_pointer()
new helper: restore_altstack()
unify SS_ONSTACK/SS_DISABLE definitions
new helper: current_user_stack_pointer()
missing user_stack_pointer() instances
Bury the conditionals from kernel_thread/kernel_execve series
COMPAT_SYSCALL_DEFINE: infrastructure
|
|
Use keyring_alloc() to create special keyrings now that it has
a permissions parameter rather than using key_alloc() +
key_instantiate_and_link().
Signed-off-by: David Howells <dhowells@redhat.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This makes it compile on s390. After all the ptrace_may_access
(which we use this file) is declared exactly in linux/ptrace.h.
This is preparatory work to wire this syscall up on all archs.
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: Alexander Kartashov <alekskartashov@parallels.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
task_numa_placement() oopsed on NULL p->mm when task_numa_fault() got
called in the handling of break_ksm() for ksmd. That might be a
peculiar case, which perhaps KSM could takes steps to avoid? but it's
more robust if task_numa_placement() allows for such a possibility.
Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
