summaryrefslogtreecommitdiff
path: root/include/sound
AgeCommit message (Collapse)AuthorFilesLines
2012-08-01Merge tag 'sound-3.6' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "A collection of small fixes that have been found recently. Most of the commits are regression fixes in HD-audio and some other random drivers." * tag 'sound-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: snd-usb: fix clock source validity index ALSA: hda - Fix mute-LED GPIO initialization for IDT codecs ALSA: hda - Add descriptions for missing IDT 92HD83x models ALSA: hda - Fix polarity of mute LED on HP Mini 210 ALSA: es1688 - freeup resources on init failure ALSA: hda - Workaround for silent output on VAIO Z with ALC889 ALSA: hda - Fix WARNING from HDMI/DP parser ALSA: hda - Detach from converter at closing in patch_hdmi.c ALSA: hda - Fix mute-LED GPIO setup for HP Mini 210 ALSA: mpu401: Fix missing initialization of irq field ALSA: hda - Fix invalid D3 of headphone DAC on VT202x codecs
2012-07-31Merge branch 'v4l_for_linus' of ↵Linus Torvalds1-0/+5
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull second set of media updates from Mauro Carvalho Chehab: - radio API: add support to work with radio frequency bands - new AM/FM radio drivers: radio-shark, radio-shark2 - new Remote Controller USB driver: iguanair - conversion of several drivers to the v4l2 core control framework - new board additions at existing drivers - the remaining (and vast majority of the patches) are due to drivers/DocBook fixes/cleanups. * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (154 commits) [media] radio-tea5777: use library for 64bits div [media] tlg2300: Declare MODULE_FIRMWARE usage [media] lgs8gxx: Declare MODULE_FIRMWARE usage [media] xc5000: Add MODULE_FIRMWARE statements [media] s2255drv: Add MODULE_FIRMWARE statement [media] dib8000: move dereference after check for NULL [media] Documentation: Update cardlists [media] bttv: add support for Aposonic W-DVR [media] cx25821: Remove bad strcpy to read-only char* [media] pms.c: remove duplicated include [media] smiapp-core.c: remove duplicated include [media] via-camera: pass correct format settings to sensor [media] rtl2832.c: minor cleanup [media] Add support for the IguanaWorks USB IR Transceiver [media] Minor cleanups for MCE USB [media] drivers/media/dvb/siano/smscoreapi.c: use list_for_each_entry [media] Use a named union in struct v4l2_ioctl_info [media] mceusb: Add Twisted Melon USB IDs [media] staging/media/solo6x10: use module_pci_driver macro [media] staging/media/dt3155v4l: use module_pci_driver macro ... Conflicts: Documentation/feature-removal-schedule.txt
2012-07-30[media] snd_tea575x: Add a cannot_mute flagHans de Goede1-0/+1
Some devices which use the tea575x tuner chip don't allow direct control over the IO pins, and thus cannot mute the audio output. Signed-off-by: Hans de Goede <hdegoede@redhat.com> CC: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-07-30[media] snd_tea575x: Add write_/read_val operationsHans de Goede1-0/+4
Some devices which use the tea575x tuner chip don't allow bit banging the lines, instead they offer a method to directly set / get the contents of the 25 bit shift-register in the chip. Notably the Griffin radioSHARK USB radio receiver does this. Signed-off-by: Hans de Goede <hdegoede@redhat.com> CC: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-07-30ALSA: es1688 - freeup resources on init failureFengguang Wu1-0/+1
This will fix the following oops: [ 6.169981] genirq: Flags mismatch irq 5. 00000000 (ES1688) vs. 00000000 (ES1688) [ 6.170851] Pid: 1, comm: swapper Not tainted 3.5.0-00004-gceee0e9 #14 [ 6.170851] Call Trace: [ 6.170851] [<c1062237>] ? __setup_irq+0x3c7/0x420 [ 6.170851] [<c1062486>] ? request_threaded_irq+0x76/0x140 [ 6.170851] [<c1290220>] ? snd_es1688_ioctl+0x10/0x10 [ 6.170851] [<c10624c2>] ? request_threaded_irq+0xb2/0x140 [ 6.170851] [<c1291196>] ? snd_es1688_create+0x96/0x330 [ 6.170851] [<c138365d>] ? snd_gusextreme_probe+0x18d/0x5a2 [ 6.170851] [<c11c9d80>] ? __driver_attach+0x80/0x80 [ 6.170851] [<c10db22f>] ? sysfs_create_link+0xf/0x20 [ 6.170851] [<c11c9d80>] ? __driver_attach+0x80/0x80 [ 6.170851] [<c11d1502>] ? isa_bus_probe+0x12/0x20 [ 6.170851] [<c11c9b95>] ? driver_probe_device+0x55/0x1c0 [ 6.170851] [<c13ae04f>] ? _raw_spin_unlock+0xf/0x30 [ 6.170851] [<c13705ea>] ? klist_next+0x6a/0xe0 [ 6.170851] [<c11d15c1>] ? isa_bus_match+0x21/0x40 [ 6.170851] [<c11c8a24>] ? bus_for_each_drv+0x34/0x70 [ 6.170851] [<c11c9e4b>] ? device_attach+0x7b/0x90 [ 6.170851] [<c11c9d80>] ? __driver_attach+0x80/0x80 [ 6.170851] [<c11c8bff>] ? bus_probe_device+0x5f/0x80 [ 6.170851] [<c11c7493>] ? device_add+0x573/0x620 [ 6.170851] [<c1042820>] ? complete_all+0x40/0x60 [ 6.170851] [<c13ae08a>] ? _raw_spin_unlock_irqrestore+0x1a/0x30 [ 6.170851] [<c11d16c6>] ? isa_register_driver+0xb6/0x150 [ 6.170851] [<c15c9002>] ? alsa_card_gusmax_init+0xf/0xf [ 6.170851] [<c15a99bc>] ? do_one_initcall+0x7f/0x12b [ 6.170851] [<c15a9b7a>] ? kernel_init+0x112/0x1a9 [ 6.170851] [<c15a9423>] ? do_early_param+0x77/0x77 [ 6.170851] [<c15a9a68>] ? do_one_initcall+0x12b/0x12b [ 6.170851] [<c13aefbe>] ? kernel_thread_helper+0x6/0xd [ 6.190170] es1688: can't grab IRQ 5 [ 6.190613] genirq: Flags mismatch irq 5. 00000000 (ES1688) vs. 00000000 (ES1688) [ 6.191566] Pid: 1, comm: swapper Not tainted 3.5.0-00004-gceee0e9 #14 [ 6.192394] Call Trace: [ 6.192685] [<c1062237>] ? __setup_irq+0x3c7/0x420 [ 6.193342] [<c1062486>] ? request_threaded_irq+0x76/0x140 [ 6.194081] [<c1290220>] ? snd_es1688_ioctl+0x10/0x10 [ 6.194607] [<c10624c2>] ? request_threaded_irq+0xb2/0x140 [ 6.194607] [<c1291196>] ? snd_es1688_create+0x96/0x330 [ 6.194607] [<c138365d>] ? snd_gusextreme_probe+0x18d/0x5a2 [ 6.194607] [<c11c9d80>] ? __driver_attach+0x80/0x80 [ 6.194607] [<c10db22f>] ? sysfs_create_link+0xf/0x20 [ 6.194607] [<c11c9d80>] ? __driver_attach+0x80/0x80 [ 6.194607] [<c11d1502>] ? isa_bus_probe+0x12/0x20 [ 6.194607] [<c11c9b95>] ? driver_probe_device+0x55/0x1c0 [ 6.194607] [<c13ae04f>] ? _raw_spin_unlock+0xf/0x30 [ 6.194607] [<c13705ea>] ? klist_next+0x6a/0xe0 [ 6.194607] [<c11d15c1>] ? isa_bus_match+0x21/0x40 [ 6.194607] [<c11c8a24>] ? bus_for_each_drv+0x34/0x70 [ 6.194607] [<c11c9e4b>] ? device_attach+0x7b/0x90 [ 6.194607] [<c11c9d80>] ? __driver_attach+0x80/0x80 [ 6.194607] [<c11c8bff>] ? bus_probe_device+0x5f/0x80 [ 6.194607] [<c11c7493>] ? device_add+0x573/0x620 [ 6.194607] [<c1042820>] ? complete_all+0x40/0x60 [ 6.194607] [<c13ae08a>] ? _raw_spin_unlock_irqrestore+0x1a/0x30 [ 6.194607] [<c11d16c6>] ? isa_register_driver+0xb6/0x150 [ 6.194607] [<c15c9002>] ? alsa_card_gusmax_init+0xf/0xf [ 6.194607] [<c15a99bc>] ? do_one_initcall+0x7f/0x12b [ 6.194607] [<c15a9b7a>] ? kernel_init+0x112/0x1a9 [ 6.194607] [<c15a9423>] ? do_early_param+0x77/0x77 [ 6.194607] [<c15a9a68>] ? do_one_initcall+0x12b/0x12b [ 6.194607] [<c13aefbe>] ? kernel_thread_helper+0x6/0xd [ 6.210779] es1688: can't grab IRQ 5 [ 6.211305] gusextreme: probe of gusextreme.0 failed with error -16 Signed-off-by: Daniel Mack <zonque@gmail.com> Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-07-19Merge branch 'topic/pm-convert' into for-nextTakashi Iwai7-4280/+1
This merges the changes for converting to new PM ops for platform and some other drivers. Also move some header files to local places from the public include/sound.
2012-07-19Merge tag 'asoc-3.6' of ↵Takashi Iwai7-5/+229
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next ASoC: Updates for 3.6 This has been a pretty quiet release - very little activity in framework terms, mostly just a few new drivers and updates: - Added the ability to add and remove DAPM paths dynamically, mostly for reparenting on clock changes. - New machine drivers for Marvell Brownstone, ST-Ericsson Ux500 reference platform and ttc-dkp. - New CPU drivers for Blackfin BF6xx SPORTs in I2S mode, Marvell MMP, Synopsis Designware I2S controllers, and SPEAr DMA and S/PDIF - New CODEC drivers for Dialog DA732x, ST STA529, ST-Ericsson AB8500, TI Isabelle and Wolfson Microelectronics WM5102 and WM5110
2012-07-18Merge branch 'topic/misc' into for-nextTakashi Iwai3-9/+25
Generic updates for sound 3.6
2012-07-16ALSA: tlv: add DECLARE_TLV_DB_RANGE()Clemens Ladisch1-0/+4
Add a DECLARE_TLV_DB_RANGE() macro so that dB range information can be specified without having to count the items manually for TLV_DB_RANGE_HEAD(). Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-07-16ALSA: tlv: add DECLARE_TLV_CONTAINER()Clemens Ladisch1-0/+5
Add the DECLARE_TLV_CONTAINER() macro to allow having static TLVs containing more than one item. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-07-16ALSA: tlv: compute TLV_*_ITEM lengths automaticallyClemens Ladisch1-8/+12
Add helper macros with a little bit of preprocessor magic to automatically compute the length of a TLV item. This lets us avoid having to compute this by hand, and will allow to use items that do not use a fixed length. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-07-06ASoC: dapm: Allow routes to be deleted at runtimeMark Brown1-0/+2
Since we're now relying on DAPM for things like enabling clocks when we reparent the clocks for widgets we need to either use conditional routes (which are expensive) or remove routes at runtime. Add a route removal API to support this use case. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2012-07-05ALSA: pcm: Make constraints lists constMark Brown1-1/+1
They aren't modified by the core so the drivers can declare them const. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-07-03ALSA: Move some headers to local directories from include/soundTakashi Iwai6-4276/+0
This is a bit clean up of public sound header directory. Some header files in include/sound aren't really necessary to be located there but can be moved to their local directories gracefully. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-07-03ALSA: Convert to new pm_ops for PCI driversTakashi Iwai4-7/+4
Straightforward conversion to the new pm_ops from the legacy suspend/resume ops. Since we change vx222, vx_core and vxpocket have to be converted, too. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-25Merge branch 'v4l_for_linus' of ↵Linus Torvalds1-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media fixes from Mauro Carvalho Chehab. Trivial conflict due to new USB HID ID's being added next to each other (Baanto vs Axentia). * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (44 commits) [media] smia: Fix compile failures [media] Fix VIDIOC_DQEVENT docbook entry [media] s5p-fimc: Fix control creation function [media] s5p-mfc: Fix checkpatch error in s5p_mfc_shm.h file [media] s5p-mfc: Fix setting controls [media] v4l/s5p-mfc: added image size align in VIDIOC_TRY_FMT [media] v4l/s5p-mfc: corrected encoder v4l control definitions [media] v4l: mem2mem_testdev: Fix race conditions in driver [media] s5p-mfc: Bug fix of timestamp/timecode copy mechanism [media] cxd2820r: Fix an incorrect modulation type bitmask [media] em28xx: Show a warning if the board does not support remote controls [media] em28xx: Add remote control support for Terratec's Cinergy HTC Stick HD [media] USB: Staging: media: lirc: initialize spinlocks before usage [media] Revert "[media] media: mx2_camera: Fix mbus format handling" [media] bw-qcam: driver and pixfmt documentation fixes [media] cx88: fix firmware load on big-endian systems [media] cx18: support big-endian systems [media] ivtv: fix support for big-endian systems [media] tuner-core: return the frequency range of the correct tuner [media] v4l2-dev.c: fix g_parm regression in determine_valid_ioctls() ...
2012-06-23ASoC: core: Add DOUBLE_R variants of the _RANGE controlsMark Brown1-0/+21
The code handles this fine already, we just need new macros in the header for drivers to create the controls. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2012-06-23ASoC: SPEAr spdif_in: Add spdif IN supportVipin Kumar1-0/+29
This patch implements the spdif IN driver for ST peripheral Signed-off-by: Vipin Kumar <vipin.kumar@st.com> Signed-off-by: Rajeev Kumar <rajeev-dlh.kumar@st.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-22ASoC: Add support for SPEAr ASoC pcm layer.Rajeev Kumar1-0/+35
This patch add support for the SPEAr ASoC pcm layer in ASoC framework. The pcm layer uses common snd_dmaengine framework. Signed-off-by: Rajeev Kumar <rajeev-dlh.kumar@st.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-22ASoC: Add support for synopsys i2s controller as per ASoC framework.Rajeev Kumar1-0/+69
This patch add support for synopsys I2S controller as per the ASoC framework. Signed-off-by: Rajeev Kumar <rajeev-dlh.kumar@st.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-20ASoC: dmaengine-pcm: Add support for querying stream position from DMA driverLars-Peter Clausen1-0/+1
Currently the sound dmaengine pcm helper functions implement the pcm_pointer callback by trying to count the number of elapsed periods. This is done by advancing the stream position in the dmaengine callback by one period. Unfortunately there is no guarantee that the callback will be called for each elapsed period. It may be possible that under high system load it is only called once for multiple elapsed periods. This patch addresses the issue by implementing support for querying the current stream position directly from the dmaengine driver. Since not all dmaengine drivers support reporting the stream position yet the old period counting implementation is kept for now. Furthermore the new mechanism allows to report the stream position with a sub-period granularity, given that the dmaengine driver supports this. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-20ASoC: dmaengine-pcm: Rename and deprecate snd_dmaengine_pcm_pointerLars-Peter Clausen1-1/+1
Currently the sound dmaengine pcm helper functions implement the pcm_pointer callback by trying to count the number of elapsed periods. This is done by advancing the stream position in the dmaengine callback by one period. Unfortunately there is no guarantee that the callback will be called for each elapsed period. It may be possible that under high system load it is only called once for multiple elapsed periods. This patch renames the current implementation and documents its shortcomings and that it should not be used anymore in new drivers. The next patch will introduce a new snd_dmaengine_pcm_pointer which will be implemented based on querying the current stream position from the dma device. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by Vinod Koul <vinod.koul@linux.intel.com> Acked-by: Dong Aisheng <dong.aisheng@linaro.org Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-20ALSA: Add missing include of pcm.h to pcm_params.hMark Brown1-0/+2
There's a dependency but no #include. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-18ALSA: pcm: Add snd_pcm_rate_bit_to_rate()Dimitris Papastamos1-0/+1
This is essentially the reverse of snd_pcm_rate_to_rate_bit(). This is generally useful as the Compress API uses the rate bit directly and it helps to be able to map back to the actual sample rate. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-11[media] snd_tea575x: Make the module using snd_tea575x the fops ownerHans de Goede1-1/+2
Before this patch the owner field of the /dev/radio# device fops was set to the snd-tea575x-tuner module itself. Meaning that the module which was using it could be rmmod-ed while the device is open, and then BAD things happen. I know, as I found out the hard way :) Note that there is no need to also somehow increase the refcount of the snd-tea575x-tuner module itself, since any drivers using it will have symbolic references to it. Signed-off-by: Hans de Goede <hdegoede@redhat.com> CC: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-06-03ASoC: core: Add single controls with specified range of valuesAdam Thomson1-0/+23
Control type added for cases where a specific range of values within a register are required for control. Added convenience macros: SOC_SINGLE_RANGE SOC_SINGLE_RANGE_TLV Added accessor implementations: snd_soc_info_volsw_range snd_soc_put_volsw_range snd_soc_get_volsw_range Signed-off-by: Michal Hajduk <Michal.Hajduk@diasemi.com> Signed-off-by: Adam Thomson <Adam.Thomson@diasemi.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-03ASoC: make snd_soc_dai_link more symmetricalStephen Warren1-5/+28
Prior to this patch, the CPU side of a DAI link was specified using a single name. Often, this was the result of calling dev_name() on the device providing the DAI, but in the case of a CPU DAI driver that provided multiple DAIs, it needed to mix together both the device name and some device-relative name, in order to form a single globally unique name. However, the CODEC side of the DAI link was specified using separate fields for device (name or OF node) and device-relative DAI name. This patch allows the CPU side of a DAI link to be specified in the same way as the CODEC side, separating concepts of device and device-relative DAI name. I believe this will be important in multi-codec and/or dynamic PCM scenarios, where a single CPU driver provides multiple DAIs, while also booting using device tree, with accompanying desire not to hard-code the CPU side device's name into the original .cpu_dai_name field. Ideally, both the CPU DAI and CODEC DAI loops in soc_bind_dai_link() would now be identical. However, two things prevent that at present: 1) The need to save rtd->codec for the CODEC side, which means we have to search for the CODEC explicitly, and not just the CODEC side DAI. 2) Since we know the CODEC side DAI is part of a codec, and not just a standalone DAI, it's slightly more efficient to convert .codec_name/ .codec_of_node into a codec first, and then compare each DAI's .codec field, since this avoids strcmp() on each DAI's CODEC's name within the loop. However, the two loops are essentially semantically equivalent. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-03ASoC: core: Add widget SND_SOC_DAPM_CLOCK_SUPPLYOla Lilja1-0/+10
Adds a supply-widget variant for connection to the clock-framework. This widget-type corresponds to the variant for regulators. Signed-off-by: Ola Lilja <ola.o.lilja@stericsson.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-03ALSA: pcm: Add debug-print helper functionOla Lilja1-0/+11
Adds a function getting the stream-name as a string for a specific stream. Signed-off-by: Ola Lilja <ola.o.lilja@stericsson.com> Reviewed-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-22Merge tag 'asoc-3.5' of ↵Takashi Iwai1-1/+5
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Last minute updates These are all new code, they've been in -next already so should be OK for merge this time round. I'd been planning to send a pull request today after they'd had a bit of exposure there to make sure breakage didn't propagate into your tree.
2012-05-21Merge branch 'topic/misc' into for-linusTakashi Iwai2-0/+55
2012-05-19ASoC: sh: fsi: enable chip specific data transfer modeKuninori Morimoto1-1/+5
SupherH FSI2 can use special data transfer, but it depends on CPU-FSI2 connection style. We can use 16bit data stream mode if it was valid connection, and it is required for 16bit data DMA transfer / SPDIF sound output. We can use 24bit data transfer if it was invalid connection. We can select connection type if CPU is SH7372, and it is always valid connection if latest SuperH. This patch adds new bus_option and fsi_bus_setup() for supporting these feature. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-13ASoC: max98095: Single bit bitfields should be unsignedMark Brown1-1/+1
There's no space for the sign bit. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-02ASoC: core: Allow DAIs to specify a base addressMark Brown1-0/+1
Devices with many DAIs are becoming more and more common, and generally the more modern devices have consistent register layouts between DAIs. Rather than have drivers open code lookups based on the DAI ID or cause uglification in UI by having register addresses for IDs provide a base address field they can use. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2012-04-30ASoC: Add support for CS42L52 CodecBrian Austin1-0/+36
This patch adds support for Cirrus Logic CS42L52 Low Power Stereo Codec Signed-off-by: Brian Austin <brian.austin@cirrus.com> Signed-off-by: Georgi Vlaev <joe@nucleusys.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-26ASoC: dpcm: Add bespoke trigger()Liam Girdwood3-0/+7
Some on SoC DSP HW is very tightly coupled with DMA and DAI drivers. It's necessary to allow some flexability wrt to PCM operations here so that we can define a bespoke DPCM trigger() PCM operation for such HW. A bespoke DPCM trigger() allows exact ordering and timing of component triggering by allowing a component driver to manage the final enable and disable configurations without adding extra complexity to other component drivers. e.g. The McPDM DAI and ABE are tightly coupled on OMAP4 so we have a bespoke trigger to manage the trigger to improve performance and reduce complexity when triggering new McPDM BEs. Signed-off-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-26ASoC: dpcm: Add API for DAI link substream and runtime lookupLiam Girdwood1-0/+5
Some component drivers will need to be able to look up their DAI link substream and RTD data. Provide a mechanism for this. Signed-off-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-26ASoC: dpcm: Add runtime dynamic route updateLiam Girdwood1-0/+1
This patch allows DPCM to dynamically alter the FE to BE PCM links at runtime based on mixer setting updates. DAPM is looked up after every mixer update and we perform a DPCM runtime update if the mixer has a change of value. This patchs adds/changes the following :- o Adds DPCM runtime update core. o Changes soc_dapm_mixer_update_power() and soc_dapm_mux_update_power() to return if a change has occured rather than 0. No other users check atm. Signed-off-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-26ASoC: dpcm: Add debugFS support for DPCMLiam Girdwood2-0/+8
Add debugFS files for DPCM link management information. Signed-off-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-26ASoC: dpcm: Add Dynamic PCM core operations.Liam Girdwood2-0/+149
The Dynamic PCM core allows digital audio data to be dynamically routed between different ALSA PCMs and DAI links on SoC CPUs with on chip DSP devices. e.g. audio data could be played on pcm:0,0 and routed to any (or all) SoC DAI links. Dynamic PCM introduces the concept of Front End (FE) PCMs and Back End (BE) PCMs. The FE PCMs are normal ALSA PCM devices except that they can dynamically route digital audio data to any supported BE PCM. A BE PCM has no ALSA device, but represents a DAI link and it's substream and audio HW parameters. e.g. pcm:0,0 routing digital data to 2 external codecs. FE pcm:0,0 ----> BE (McBSP.0) ----> CODEC 0 +--> BE (McPDM.0) ----> CODEC 1 e.g. pcm:0,0 and pcm:0,1 routing digital data to 1 external codec. FE pcm:0,0 --- +--> BE (McBSP.0) ----> CODEC FE pcm:0,1 --- The digital audio routing is controlled by the usual ALSA method of mixer kcontrols. Dynamic PCM uses a DAPM graph to work out the routing based upon the mixer settings and configures the BE PCMs based on routing and the FE HW params. DPCM is designed so that most ASoC component drivers will need no modification at all. It's intended that existing CODEC, DAI and platform drivers can be used in DPCM based audio devices without any changes. However, there will be some cases where minor changes are required (e.g. for very tightly coupled HW) and there are helpers to support this too. Somethimes the HW params of a FE and BE do not match or are incompatible, so in these cases the machine driver can reconfigure any hw_params and make any DSP perform sample rate / format conversion. This patch adds the core DPCM code and contains :- o The FE and BE PCM operations. o FE and BE DAI link support. o FE and BE PCM creation. o BE support API. o BE and FE link management. Signed-off-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-23ASoC: core: Add strobe controlKristoffer KARLSSON1-0/+8
Added support for a control that strobes a bit in a register to high then back to low (or the inverse). This is typically useful for hardware that requires strobing a singe bit to trigger some functionality and where exposing the bit in a normal single control would require the user to first manually set then again unset the bit again for the strobe to trigger. Added convenience macro. SOC_SINGLE_STROBE Added accessor implementations. snd_soc_get_strobe snd_soc_put_strobe Signed-off-by: Kristoffer KARLSSON <kristoffer.karlsson@stericsson.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-23ASoC: core: Add signed multi register controlKristoffer KARLSSON1-1/+21
Added control type that can span multiple consecutive codec registers forming a single signed value in a MSB/LSB manner. The control dynamically adjusts to the register word size configured in driver. Added convenience macro. SOC_SINGLE_XR_SX Added accessor implementations. snd_soc_info_xr_sx snd_soc_get_xr_sx snd_soc_put_xr_sx Signed-off-by: Kristoffer KARLSSON <kristoffer.karlsson@stericsson.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-18ASoC: dapm: Add API call to query valid DAPM pathsLiam Girdwood1-0/+5
In preparation for ASoC DSP support. Add a DAPM API call to determine whether a DAPM audio path is valid between source and sink widgets. This also takes into account all kcontrol mux and mixer settings in between the source and sink widgets to validate the audio path. This will be used by the DSP core to determine the runtime DAI mappings between FE and BE DAIs in order to run PCM operations. Signed-off-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-18ALSA: Add definitions for CEA-861 Audio InfoFramesRicardo Neri2-0/+55
Along with the IEC-60958 channel status word, CEA-861 Audio InfoFrames are used in HDMI and DisplayPort to describe the parameters of the audio stream. Hence, drivers for such devices may use these definitions to, for instance, fill a CEA-861 data structure and pass it to a display driver to configure an IP. Signed-off-by: Ricardo Neri <ricardo.neri@ti.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-04-16ASoC: Merge tag 'v3.4-rc3' into for-3.5Mark Brown1-0/+10
Linux 3.4-rc3 contains a bunch of Tegra changes which are conflicting annoyingly with the new development that's going on for Tegra so merge it up to resolve those conflicts. Conflicts: sound/soc/soc-core.c sound/soc/tegra/tegra_i2s.c sound/soc/tegra/tegra_spdif.c
2012-04-16ASoC: core: Support transparent CODEC<->CODEC DAI linksMark Brown2-0/+8
Rather than having the user half start a stream but avoid any DMA to trigger data flow on links which don't pass through the CPU create a DAPM route between the two DAI widgets using a hw_params configuration provided by the machine driver with the new 'params' member of the dai_link struct. If no configuration is provided in the dai_link then use the old style even for CODEC<->CODEC links to avoid breaking systems. This greatly simplifies the userspace usage of such links, making them as simple as analogue connections with the stream configuration being completely transparent to them. This is achieved by defining a new dai_link widget type which is created when CODECs are linked and triggering the configuration of the link via the normal PCM operations from there. It is expected that the bias level callbacks will be used for clock configuration. Currently only the DAI format, rate and channel count can be configured and currently the only DAI operations which can be called are hw_params and digital_mute(). This corresponds well to the majority of CODEC drivers which only use other callbacks for constraint setting but there is obviously much room for extension here. We can't simply call hw_params() on startup as things like the system clocking configuration may change at runtime and in future it will be desirable to offer some configurability of the link parameters. At present we are also restricted to a single DAPM link for the entire DAI. Once we have better support for channel mapping it would also be desirable to extend this feature so that we can propagate per-channel power state over the link. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2012-04-13ASoC: sh: fsi: use simple-card instead of fsi-ak4642Kuninori Morimoto1-12/+0
This patch uses simple-card driver instead of fsi-ak4642 on each board. To select AK4642 driver, each boards select it on Kconfig. This patch removes fsi-ak4642 driver which is no longer needed Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-13ASoC: add generic simple-card supportKuninori Morimoto1-0/+38
Current ASoC requires card.c file to each platforms in order to specifies its CPU and Codecs pair. But the differences between these were only value/strings of setting. In order to reduce duplicate driver, this patch adds generic/simple-card. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-10ALSA: hda - hide HDMI/ELD printks unless snd.debug=2Fengguang Wu1-0/+10
Also remove two warnings when CONFIG_SND_DEBUG is not set: sound/pci/hda/patch_hdmi.c: In function ‘hdmi_intrinsic_event’: sound/pci/hda/patch_hdmi.c:761:6: warning: unused variable ‘eldv’ [-Wunused-variable] sound/pci/hda/patch_hdmi.c:760:6: warning: unused variable ‘pd’ [-Wunused-variable] Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-04-04ASoC: dapm: Allow DAPM registers to be 31 bitMark Brown1-1/+1
Supports larger register maps, not using unsigned ints for the full 32 bit as we rely on checking for negative registers. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-22 16:46:27 +0000