summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2010-04-30Staging: hv: Fix a bug affecting IPv6Haiyang Zhang1-0/+1
Fix a bug affecting IPv6 Added the multicast flag for proper IPv6 function. Reported-by: Toshikazu Sakai <toshikas@microsoft.com> Signed-off-by: Hank Janssen <hjanssen@microsoft.com> Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30staging: iio: ring_sw: Fix incorrect test on successful read of last value, ↵Jonathan Cameron1-1/+1
causes infinite loop This is a bad one. The test means that almost no reads of the last value ever succeed! Result is an infinite loop. Another one for the 'oops' category. Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30staging: iio: Function iio_get_new_idr_val() return negative value if fails.Sonic Zhang1-1/+2
Function iio_get_new_idr_val() return negative value if fails. So, only error when ret < 0 in iio_device_register_eventset(). Signed-off-by: Sonic Zhang <sonic.adi@gmail.com> Acked-by: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30Staging: iio: adc: fix dangling pointersWolfram Sang1-0/+2
Fix I2C-drivers which missed setting clientdata to NULL before freeing the structure it points to. Also fix drivers which do this _after_ the structure was freed already. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30Staging: iio: light: fix dangling pointersWolfram Sang1-0/+2
Fix I2C-drivers which missed setting clientdata to NULL before freeing the structure it points to. Also fix drivers which do this _after_ the structure was freed already. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30Staging: iio: test for failed allocationDan Carpenter1-0/+3
We should return test to see if iio_allocate_trigger() fails and return -ENOMEM. Signed-off-by: Dan Carpenter <error27@gmail.com> Acked-by: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30staging: iio: lis3l02dq - incorrect ws used in container of call.Jonathan Cameron1-1/+1
The word oops comes to mind. Original patch to merge the two work queues in here (prior to Greg taking them into staging) changed the top half to only use one of them and the bottom half to assume it was the other. Currently causes a NULL pointer dereference if you enable any of the events on an lis3l02dq. Just goes to show I need a few more regression tests. Signed-of-by: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30USB: sl811-hcd: Fix device disconnectMichael Hennerich1-3/+3
A while ago I provided a patch that fixed device detection after device removal (USB: sl811-hcd: Fix device disconnect). Chris Brissette pointed out that the detection/removal counter method to distinguish insert or remove my fail under certain conditions. Latest SL811HS datasheet (Document 38-08008 Rev. *D) indicates that bit 6 (SL11H_INTMASK_RD) of the Interrupt Status Register together with bit 5 (SL11H_INTMASK_INSRMV) can be used to determine whether a device has been inserted or removed. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30USB: ohci-at91: fix power management hangingPatrice Vilchez1-0/+2
A hanging has been detected in ohci-at91 while going in suspend to ram. This is due to asynchronous operations between ohci reset and ohci clocks shutdown. This patch adds the reading of the control register between the reset of the ohci and clocks stop. This "flush the writes" idea was taken from ohci-hcd.c file (ohci_shutdown() function). Signed-off-by: Patrice Vilchez <patrice.vilchez@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30USB: rename usb_buffer_alloc() and usb_buffer_free()Daniel Mack1-10/+10
For more clearance what the functions actually do, usb_buffer_alloc() is renamed to usb_alloc_coherent() usb_buffer_free() is renamed to usb_free_coherent() They should only be used in code which really needs DMA coherency. [added compatibility macros so we can convert things easier - gregkh] Signed-off-by: Daniel Mack <daniel@caiaq.de> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Pedro Ribeiro <pedrib@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30USB: ti_usb: fix printk format warningRandy Dunlap1-1/+1
Fix printk format warning in usbserial/ti_usb: drivers/usb/serial/ti_usb_3410_5052.c:1738: warning: format '%d' expects type 'int', but argument 5 has type 'size_t' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30USB: gadget: s3c-hsotg: Add missing unlockJulia Lawall1-2/+5
In an error handling case the lock is not unlocked. The return is converted to a goto, to share the unlock at the end of the function. A simplified version of the semantic patch that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r exists@ expression E1; identifier f; @@ f (...) { <+... * spin_lock_irqsave (E1,...); ... when != E1 * return ...; ...+> } // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30USB: fix build on OMAPs if CONFIG_PM_RUNTIME is not setAnand Gadiyar1-1/+1
With patch as1329 (USB: convert to the runtime PM framework), we make USB_SUSPEND depend on PM_RUNTIME instead of CONFIG_PM. Also, CONFIG_USB_OTG selects CONFIG_USB_SUSPEND. If PM_RUNTIME is not enabled, and we try to enable USB_OTG, we will end up with CONFIG_USB_SUSPEND selected. This is due to a known bug with the select statement. This makes the build break on various OMAP configs (which have CONFIG_USB_OTG set by default, but do not yet have CONFIG_PM_RUNTIME enabled). Avoid this by changing the logic for CONFIG_USB_OTG from "select USB_SUSPEND" to "depends on USB_SUSPEND" Signed-off-by: Anand Gadiyar <gadiyar@ti.com> CC: Michal Marek <mmarek@suse.cz> CC: Tony Lindgren <tony@atomide.com> CC: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30USB: oxu210hp: release spinlock on error pathDan Carpenter1-3/+3
Smatch complained about this missing spinlock. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30USB: serial: option: add cinterion device idGreg Kroah-Hartman1-0/+3
This adds a device id for a Cinterion device. Reported-by: John Race <John.Race@roscom.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30USB: serial: option: ZTEAC8710 Support with Device ID 0xffffMahesh Kuruganti1-0/+2
PATCH TO EXTEND SUPPORT TO AC8710 WITH 0xFFFF Product ID. Signed-off-by: Mahesh Kuruganti <maheshkuruganti@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30USB: serial: pl2303: Hybrid reader Uniform HCR331Simone Contini2-0/+2
I tried a magnetic stripe reader (http://www.kimaldi.com/kimaldi_eng/productos/lectores_de_tarjetas/lectores_tarjeta_chip_y_dni/lector_hibrido_uniform_hcr_331) and I see that it is interfaced with a PL2303. I wrote a patch to use your driver which simply adds the product ID for the device and it seems working fine. From: Simone Contini <s.contini@oltrelinux.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30USB: option: add ID for ZTE MF 330Dominik Brodowski1-0/+5
Based on the information provided for by Paweł Drobek, add a second vendor ID and the correct product ID for ZTE MF 330. Reported-by: Paweł Drobek <pawel.drobek@gmail.com> Signed-off: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30USB: xhci: properly set endpoint context fields for periodic eps.Sarah Sharp2-0/+55
For periodic endpoints, we must let the xHCI hardware know the maximum payload an endpoint can transfer in one service interval. The xHCI specification refers to this as the Maximum Endpoint Service Interval Time Payload (Max ESIT Payload). This is used by the hardware for bandwidth management and scheduling of packets. For SuperSpeed endpoints, the maximum is calculated by multiplying the max packet size by the number of bursts and the number of opportunities to transfer within a service interval (the Mult field of the SuperSpeed Endpoint companion descriptor). Devices advertise this in the wBytesPerInterval field of their SuperSpeed Endpoint Companion Descriptor. For high speed devices, this is taken by multiplying the max packet size by the "number of additional transaction opportunities per microframe" (the high bits of the wMaxPacketSize field in the endpoint descriptor). For FS/LS devices, this is just the max packet size. The other thing we must set in the endpoint context is the Average TRB Length. This is supposed to be the average of the total bytes in the transfer descriptor (TD), divided by the number of transfer request blocks (TRBs) it takes to describe the TD. This gives the host controller an indication of whether the driver will be enqueuing a scatter gather list with many entries comprised of small buffers, or one contiguous buffer. It also takes into account the number of extra TRBs you need for every TD. This includes No-op TRBs and Link TRBs used to link ring segments together. Some drivers may choose to chain an Event Data TRB on the end of every TD, thus increasing the average number of TRBs per TD. The Linux xHCI driver does not use Event Data TRBs. In theory, if there was an API to allow drivers to state what their bandwidth requirements are, we could set this field accurately. For now, we set it to the same number as the Max ESIT payload. The Average TRB Length should also be set for bulk and control endpoints, but I have no idea how to guess what it should be. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30USB: xhci: properly set the "Mult" field of the endpoint context.Sarah Sharp1-0/+14
A SuperSpeed interrupt or isochronous endpoint can define the number of "burst transactions" it can handle in a service interval. This is indicated by the "Mult" bits in the bmAttributes of the SuperSpeed Endpoint Companion Descriptor. For example, if it has a max packet size of 1024, a max burst of 11, and a mult of 3, the host may send 33 1024-byte packets in one service interval. We must tell the xHCI host controller the number of multiple service opportunities (mults) the device can handle when the endpoint is installed. We do that by setting the Mult field of the Endpoint Context before a configure endpoint command is sent down. The Mult field is invalid for control or bulk SuperSpeed endpoints. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30USB: OHCI: don't look at the root hub to get the number of portsAlan Stern1-1/+1
This patch (as1371) fixes a small bug in ohci-hcd. The HCD already knows how many ports the controller has; there's no need to go looking at the root hub's usb_device structure to find out. Especially since the root hub's maxchild value is set correctly only while the root hub is bound to the hub driver. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30USB: don't choose configs with no interfacesAlan Stern1-1/+1
This patch (as1372) fixes a bug in the routine that chooses the default configuration to install when a new USB device is detected. The algorithm is supposed to look for a config whose first interface is for a non-vendor-specific class. But the way it's currently written, it will also accept a config with no interfaces at all, which is not very useful. (Believe it or not, such things do exist.) Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Andrew Victor <avictor.za@gmail.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30USB: cdc-acm: add another device quirkRuss Nelson1-0/+3
The Maretron USB100 needs this quirk in order to work properly. Signed-off-by: Russ Nelson <nelson@crynwr.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30USB: fix testing the wrong variable in fs_create_by_name()Dan Carpenter1-2/+2
There is a typo here. We should be testing "*dentry" which was just assigned instead of "dentry". This could result in dereferencing an ERR_PTR inside either usbfs_mkdir() or usbfs_create(). Signed-off-by: Dan Carpenter <error27@gmail.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30usb: Fix tusb6010 for DMA APITony Lindgren2-8/+27
Commit 18eabe2347ae7a11b3db768695913724166dfb0e introduced DMA buffer ownership. Fix tusb6010 accordingly. To compile, also dummy musb_platform_save and restore functions need to be added. Also change the order of musb_read_fifo() to happen after dma_cache_maint to have the DMA operations completed before moving the remaining unaligned bytes with PIO. The DMA access and PIO touch different areas of the FIFO, so this change only makes the code a bit easier to follow. Tested on n810 and g_ether with variable size ping test. The test seems to fail for some ping sizes, but that seems to be a different problem. Signed-off-by: Tony Lindgren <tony@atomide.com> Acked-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30musb_core: fix musb_init_controller() error cleanup pathSergei Shtylyov1-17/+34
This function forgets to call usb_remove_hcd() or musb_gadget_cleanup() iff sysfs_create_group() fails. [ felipe.balbi@nokia.com : review the entire error path not only when we fail hcd or gadget ] Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30MUSB: fix DaVinci glue layer dependencySergei Shtylyov2-2/+2
CONFIG_ARCH_DAVINCI now embraces both the "real" DaVinci and DA8xx/OMAP-L1x -- on which the DaVinci glue layer won't work. Change the Makefile dependency to CONFIG_ARCH_DAVINCI_DMx which corresponds to "real" DaVinci. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30musb_core: don't call musb_platform_exit() twiceSergei Shtylyov1-10/+7
musb_platform_exit() is called twice from musb_init_controller() iff controller initialization fails. Move the call (and the DevCtl register writes surrounding it) from musb_free() to musb_remove(). Fix mispalced and now incorrect 'goto's in musb_init_controller(). Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30MUSB: OMAP: don't call clk_put()Sergei Shtylyov1-3/+0
Remove duplicate/unbalanced call to clk_put() from musb_platform_exit() -- clk_put() gets called from musb_core.c anyway... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30MUSB: DaVinci: fix musb_platform_init() error cleanup pathSergei Shtylyov1-0/+2
This function forgets to call clk_disable() iff reading the USB module version register returns 0. Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30musb_core: don't prevent disabling clock on driver unloadSergei Shtylyov1-3/+1
Resetting 'musb->clock' to NULL in musb_shutdown() prevents musb_platform_exit() from properly disabling the clock when unloading the driver -- don't do it. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30musb_core: don't touch 'musb->clock' in musb_free()Sergei Shtylyov1-5/+0
Remove duplicate/unbalanced calls to clk_disable()/clk_put() in musb_free(): - clk_disable() is called by musb_platform_exit() just prior to this call; - clk_put() is called by the callers of musb_free() prior to calling it... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30musb: potential use after freeDan Carpenter1-0/+1
We assign "urb->hcpriv = qh;" a few lines down. I'm pretty sure we want it "urb->hcpriv" to be NULL not a freed value. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30musb: save and restore missing bus control registerAjay Kumar Gupta2-1/+3
Added the missing BUS_CONTROL register in musb save/restore routines. Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com> Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30MUSB: Blackfin: don't fake blackfin_interrupt() resultSergei Shtylyov1-7/+1
Commit a5073b52833e4df8e16c93dc4cbb7e0c558c74a2 (musb_gadget: fix unhandled endpoint 0 IRQs) misses this change to blackfin.c: stop faking successful result of blackfin_interrupt() and emitting a debug message on an unhandled interrupt. Signed-off-by: Sergei Shtylyov <sshtylyov@mvista.com> Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30serial: drivers/serial/pmac_zilog.c: add missing unlockJulia Lawall1-1/+3
In an error handling case the lock is not unlocked. A simplified version of the semantic patch that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r exists@ expression E1; identifier f; @@ f (...) { <+... * spin_lock_irqsave (E1,...); ... when != E1 * return ...; ...+> } // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30serial: 8250_pnp - add Fujitsu Wacom devicePing Cheng1-0/+2
Add Fujitsu Wacom 1FGT Tablet PC device Signed-off-by: Ping Cheng <pingc@wacom.com> Cc: stable <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30tty: Fix regressions in the char driver conversionAlan Cox5-6/+16
This forgot to update a field in the old char drivers. The fact nobody has basically noticed (except one mxser user) rather suggests most of these drivers could go into the bitbucket. Signed-off-by: Alan Cox <alan@linux.intel.com> Cc: Jiri Slaby <jirislaby@gmail.com> Cc: Dan Carpenter <error27@gmail.com> Cc: Andreas Pretzsch <apr@cn-eng.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-29Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds2-4/+11
* master.kernel.org:/home/rmk/linux-2.6-arm: ARM: 6061/1: PL061 GPIO: Bug fix - setting gpio for HIGH_LEVEL interrupt is not working. ARM: 5957/1: ARM: RealView SD/MMC Card detection and write-protect using GPIOLIB ARM: 6030/1: KS8695: enable console ARM: 6060/1: PL061 GPIO: Setting gpio val after changing direction to OUT. ARM: 6059/1: PL061 GPIO: Changing *_irq_chip_data with *_irq_data for real irqs. ARM: 6023/1: update bcmring_defconfig to latest version and fix build error ARM: fix build error in arch/arm/kernel/process.c
2010-04-29Merge branch 'merge' of ↵Linus Torvalds2-0/+6
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc/ps3: Update ps3_defconfig powerpc/ps3: Update platform maintainer powerpc/pseries: Flush lazy kernel mappings after unplug operations powerpc/numa: Add form 1 NUMA affinity powerpc/fsl-booke: Fix CONFIG_RELOCATABLE support on FSL Book-E ppc32 powerpc: 2.6.34 update of defconfigs for embedded 6xx/7xxx, 8xx, 8xxx powerpc/mpc8xxx defconfigs - turn off SYSFS_DEPRECATED powerpc/83xx: configure SIL SATA driver in 83xx-wide defconfig powerpc/83xx: enable EPOLL syscall in defconfig powerpc/83xx: add RTC drivers in 83xx defconfig powerpc/fsl-cpm: Configure clock correctly for SCC powerpc/fsl_booke: Correct test for MMU_FTR_BIG_PHYS powerpc/85xx/86xx: Fix build w/ CONFIG_PCI=n
2010-04-29ARM: 6061/1: PL061 GPIO: Bug fix - setting gpio for HIGH_LEVEL interrupt is ↵viresh kumar1-1/+1
not working. In current implementation of PL061, setting type of irq to HIGH_LEVEL is not working. This patch fixes this bug. Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Acked-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-04-29pktcdvd: improve BKL and compat_ioctl.c usageArnd Bergmann1-3/+14
The pktcdvd driver uses proper locking and does not need the BKL in the ioctl and llseek functions of the character device, so kill both. Moving the compat_ioctl handling from common code into the driver itself fixes build problems when CONFIG_BLOCK is disabled. Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-04-28net/sb1250: register mdio bus in probeSebastian Siewior1-34/+33
"ifconfig eth0 up && ifconfig eth0 down" triggers: | kobject (a8000000cfa5a480): tried to init an initialized object, something is seriously wrong. | Call Trace: | [<ffffffff8010aabc>] dump_stack+0x8/0x34 | [<ffffffff80293128>] kobject_init+0xe8/0xf0 | [<ffffffff802d922c>] device_initialize+0x2c/0x98 | [<ffffffff802d9cfc>] device_register+0x14/0x28 | [<ffffffff80312cd4>] mdiobus_register+0xdc/0x1e0 | [<ffffffff80314cf0>] sbmac_open+0x58/0x220 | [<ffffffff803519bc>] __dev_open+0x11c/0x180 | [<ffffffff8034d578>] __dev_change_flags+0x120/0x180 | [<ffffffff80351848>] dev_change_flags+0x20/0x78 | [<ffffffff803a753c>] devinet_ioctl+0x7cc/0x820 | [<ffffffff80339ac8>] sock_do_ioctl+0x38/0x90 | [<ffffffff8033a258>] compat_sock_ioctl_trans+0x408/0x1030 | [<ffffffff8033af30>] compat_sock_ioctl+0xb0/0xd0 | [<ffffffff80208b08>] compat_sys_ioctl+0xa0/0x18b8 | [<ffffffff80102f94>] handle_sys+0x114/0x130 | | sb1250-mac-mdio: probed mdiobus_register() calls device_register() which initializes the kobj of the device. mdiobus_unregister() calls only device_del() so we have one reference left. That one is leaving with mdiobus_free() which is only called on remove. Since I don't see any reason why mdiobus_register()/mdiobus_unregister() should happen in ->open()/->close() I move them to probe & exit. Signed-off-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-28Merge branch 'for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6: regulator: fix enabling regulator issue on max8925
2010-04-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds23-136/+1230
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (27 commits) sfc: Change falcon_probe_board() to fail for unsupported boards sfc: Always close net device at the end of a disabling reset sfc: Wait at most 10ms for the MC to finish reading out MAC statistics sctp: Fix oops when sending queued ASCONF chunks sctp: fix to calc the INIT/INIT-ACK chunk length correctly is set sctp: per_cpu variables should be in bh_disabled section sctp: fix potential reference of a freed pointer sctp: avoid irq lock inversion while call sk->sk_data_ready() Revert "tcp: bind() fix when many ports are bound" net/usb: add sierra_net.c driver cdc_ether: fix autosuspend for mbm devices bluetooth: handle l2cap_create_connless_pdu() errors gianfar: Wait for both RX and TX to stop ipheth: potential null dereferences on error path smc91c92_cs: spin_unlock_irqrestore before calling smc_interrupt() drivers/usb/net/kaweth.c: add device "Allied Telesyn AT-USB10 USB Ethernet Adapter" bnx2: Update version to 2.0.9. bnx2: Prevent "scheduling while atomic" warning with cnic, bonding and vlan. bnx2: Fix lost MSI-X problem on 5709 NICs. cxgb3: Wait longer for control packets on initialization ...
2010-04-28sfc: Change falcon_probe_board() to fail for unsupported boardsBen Hutchings3-12/+7
The driver needs specific PHY and board support code for each SFC4000 board; there is no point trying to continue if it is missing. Currently unsupported boards can trigger an 'oops'. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Cc: stable@kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-28sfc: Always close net device at the end of a disabling resetBen Hutchings1-2/+2
This fixes a regression introduced by commit eb9f6744cbfa97674c13263802259b5aa0034594 "sfc: Implement ethtool reset operation". Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Cc: stable@kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-28sfc: Wait at most 10ms for the MC to finish reading out MAC statisticsBen Hutchings1-2/+11
The original code would wait indefinitely if MAC stats DMA failed. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Cc: stable@kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-28Merge branch 'urgent' of ↵Linus Torvalds1-36/+18
git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6 * 'urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6: pcmcia: fix matching rules for pseudo-multi-function cards pcmcia: pcmcia_dev_present bugfix
2010-04-28Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-blockLinus Torvalds7-67/+80
* 'for-linus' of git://git.kernel.dk/linux-2.6-block: coda: move backing-dev.h kernel include inside __KERNEL__ mtd: ensure that bdi entries are properly initialized and registered Move mtd_bdi_*mappable to mtdcore.c btrfs: convert to using bdi_setup_and_register() Catch filesystems lacking s_bdi drbd: Terminate a connection early if sending the protocol fails drbd: fix memory leak Fix JFFS2 sync silent failure smbfs: add bdi backing to mount session ncpfs: add bdi backing to mount session exofs: add bdi backing to mount session ecryptfs: add bdi backing to mount session coda: add bdi backing to mount session cifs: add bdi backing to mount session afs: add bdi backing to mount session. 9p: add bdi backing to mount session bdi: add helper function for doing init and register of a bdi for a file system block: ensure jiffies wrap is handled correctly in blk_rq_timed_out_timer
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-15 07:52:01 +0000