summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2010-04-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdogLinus Torvalds3-10/+10
* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog: watchdog: booke_wdt: fix build - unconstify watchdog_info watchdog: sbc_fitpc2_wdt: fixed "scheduling while atomic" bug. watchdog: sbc_fitpc2_wdt: fixed I/O operations order Watchdog: sb_wdog.c: Fix sibyte watchdog initialization
2010-04-28regulator: fix enabling regulator issue on max8925Haojian Zhuang1-1/+1
Fix regulator enabling issue that is caused by typo error in is_enabled(). Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-04-28drivers/gpu/drm/drm_sysfs.c: sysfs files error handlingDan Carpenter1-9/+12
In the original code we used "j" as an iterator but we used "i" as an index. - for (j = 0; j < i; j++) - device_remove_file(&connector->kdev, - &connector_attrs[i]); Smatch complained about that because "i" was potentially passed the end of the array. Which makes sense if we should be using "j" there. I also thought that we should remove the files for &connector_attrs_opt1 but to do that I had to add separate iterators for &connector_attrs and &connector_attrs_opt1. Signed-off-by: Dan Carpenter <error27@gmail.com> Cc: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-04-28drivers/gpu/drm/radeon/radeon_atombios.c: range check issuesDan Carpenter2-3/+3
This change makes the array larger, "MAX_SUPPORTED_TV_TIMING_V1_2" is 3 and the original size "MAX_SUPPORTED_TV_TIMING" is 2. Also there were checks that were off by one. Signed-off-by: Dan Carpenter <error27@gmail.com> Acked-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-04-28gpu: vga_switcheroo, fix lock imbalanceJiri Slaby1-2/+4
Stanse found that one error path in vga_switcheroo_debugfs_write omits to unlock vgasr_mutex. Fix that. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-04-28drivers/gpu/drm/drm_memory.c: fix check for end of loopDan Carpenter1-1/+1
"agpmem" is never NULL here. Signed-off-by: Dan Carpenter <error27@gmail.com> Cc: Eric Anholt <eric@anholt.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-04-28drivers/gpu/drm/via/via_video.c: fix off by one issueDan Carpenter1-1/+1
"fx->lock" is used as the index in "dev_priv->decoder_queue[fx->lock]" which is an array of "VIA_NR_XVMC_LOCKS" elements. Signed-off-by: Dan Carpenter <error27@gmail.com> Acked-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-04-28omap2_mcspi: small fixes of output data formatRoman Tereshonkov1-2/+2
Replaces %04x by %08x for 32-bits data output. Signed-off-by: Roman Tereshonkov <roman.tereshonkov@nokia.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-04-28omap2_mcspi: Flush posted writesRoman Tereshonkov1-0/+1
mcspi_write_chconf0 is used to control rx/tx triggering. Post-write flushing is needed to get the immediate effect. Signed-off-by: Roman Tereshonkov <roman.tereshonkov@nokia.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-04-28drm/radeon/kms/agp The wrong AGP chipset can cause a NULL pointer dereferenceRobert Fitzsimons1-6/+4
Selecting the wrong or no CONFIG_AGP_* chipset can cause a NULL pointer dereference when combined with CONFIG_DRM_RADEON_KMS and an old system with a R100 AGP card (should effect other cards too). The agp field will be set to NULL if no suitable AGP chipset driver is loaded, drm_agp_acquire already preforms a suitable NULL check so it can be used directly. Signed-off-by: Robert Fitzsimons <robfitz@273k.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-04-28drm/radeon/kms: r300 fix CS checker to allow zbuffer-only fastfillMarek Olšák3-3/+3
Signed-off-by: Marek Olšák <maraeo@gmail.com>
2010-04-28spi: spi_device memory should be released instead of device.Roman Tereshonkov1-1/+1
The memory for dev variable is allocated as a part of spi_device structure memory which the dev belongs to. Thus when the memory is released the right pointer is used. Signed-off-by: Roman Tereshonkov <roman.tereshonkov@nokia.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-04-28spi: release device claimed by bus_find_device_by_nameRoman Tereshonkov1-2/+4
In success case the function bus_find_device_by_name calls get_device. In our context put_device should be called to decrease the device count usage. Signed-off-by: Roman Tereshonkov <roman.tereshonkov@nokia.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-04-28of: check for IS_ERR()Dan Carpenter1-1/+1
get_phy_device() can return an ERR_PTR() Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-04-28serial/mpc52xx_uart: Drop outdated commentsWolfram Sang1-33/+0
Most things mentioned are either obsolete (platform-support) or wrong (device numbering, DCD spport) these days. The remaining rest is obvious. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-04-28gpio: potential null dereferenceDan Carpenter1-1/+2
Smatch found a potential null dereference in gpio_setup_irq(). The "pdesc" variable is allocated with idr_find() that can return NULL. If gpio_setup_irq() is called with 0 as gpio_flags and "pdesc" is null, it would OOPs here. Signed-off-by: Dan Carpenter <error27@gmail.com> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-04-28powerpc/pseries: Flush lazy kernel mappings after unplug operationsBenjamin Herrenschmidt2-0/+6
This ensures that the translations for unmapped IO mappings or unmapped memory are properly removed from the MMU hash table before such an unplug. Without this, the hypervisor refuses the unplug operations due to those resources still being mapped by the partition. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-04-27net/usb: add sierra_net.c driverElina Pasheva3-0/+1012
Re-submitted based on comments from netdev community. Summary of the changes: 1. Improved error handling. 2. Added the missing timeout arguments to usb_control_msg(). The following is a new Linux driver which exposes certain models of Sierra Wireless modems to the operating system as Network Interface Cards (NICs). This driver requires a version of the sierra.c driver which supports blacklisting to work properly. The blacklist in sierra.c rejects the interfaces claimed by sierra_net.c. Likewise, the sierra_net.c driver only accepts (i.e. whitelists) the interface(s) used for USB-to-WWAN traffic. The version of sierra.c which supports blacklisting is available from the sierra wireless knowledge base page for older kernels. It is also available in Linux kernel starting from version 2.6.31. This driver works with all Sierra Wireless devices configured with PID=68A3 like USB305, USB306 provided the corresponding firmware version is I2.0 (for USB305) or M3.0 (for USB306) and later. This driver will not work with earlier firmware versions than the ones shown above. In this case the driver will issue an error message indicating incompatibility and will not serve the device's USB-to-WWAN interface. Sierra_net.c sits atop a pre-existing Linux driver called usbnet.c. A series of hook functions are provided in sierra_net.c which are called by usbnet.c in response to a particular condition such as receipt or transmission of a data packet. As such, usbnet.c does most of the work of making a modem appear to the system as a network device and for properly exchanging traffic between the USB subsystem and the Network card interface. Sierra_net.c is concerned with managing the data exchanged between the USB-to-WWAN interface and the upper layers of the operating system. Signed-off-by: Elina Pasheva <epasheva@sierrawireless.com> Signed-off-by: Rory Filer <rfiler@sierrawireless.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-27cdc_ether: fix autosuspend for mbm devicesTorgny Johansson1-0/+1
Autosuspend works until you bring the wwan interface up, then the device does not enter autosuspend anymore. The following patch fixes the problem by setting the .manage_power field in the mbm_info struct to the same as in the cdc_info struct (cdc_manager_power). Signed-off-by: Torgny Johansson <torgny.johansson@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-27gianfar: Wait for both RX and TX to stopAndy Fleming1-3/+3
When gracefully stopping the controller, the driver was continuing if *either* RX or TX had stopped. We need to wait for both, or the controller could get into an invalid state. Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-27gpio: fix pca953x set_type 'scheduling while atomic' bugMarc Zyngier1-1/+13
Bill Gatliff reported the following bug when using the irq_chip facility of the pca953x driver on a PPC platform: BUG: scheduling while atomic: insmod/1530/0x00000002 He traced it back to an i2c transaction in pca953x_irq_set_type(), which can be called with interrupt disabled (from __setup_irq()). As the i2c controller can sleep while sending a message, this qualifies as a bad idea. This patch moves the i2c transaction to pca953x_irq_bus_sync_unlock(), where it is actually safe to send an i2c message. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Marc Zyngier <maz@misterjones.org> Reported-by: Bill Gatliff <bgat@billgatliff.com> Cc: Eric Miao <eric.y.miao@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-04-27ipheth: potential null dereferences on error pathDan Carpenter1-7/+8
The calls to usb_free_buffer() dereference rx_urb and tx_urb in the parameter list but those could be NULL. Signed-off-by: Dan Carpenter <error27@gmail.com> Acked-by: L. Alberto Giménez <agimenez@sysvalve.es> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-27smc91c92_cs: spin_unlock_irqrestore before calling smc_interrupt()Ken Kawasaki1-10/+21
smc91c92_cs: * spin_unlock_irqrestore before calling smc_interrupt() in media_check() to avoid lockup. * use spin_lock_irqsave for ethtool function. Signed-off-by: Ken Kawasaki <ken_kawasaki@spring.nifty.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-27drivers/usb/net/kaweth.c: add device "Allied Telesyn AT-USB10 USB Ethernet ↵Andreas Hartmann1-0/+1
Adapter" akpm: reluctantly typed in from https://bugzilla.kernel.org/show_bug.cgi?id=15599 Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-27bnx2: Update version to 2.0.9.Michael Chan1-2/+2
Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-27bnx2: Prevent "scheduling while atomic" warning with cnic, bonding and vlan.Michael Chan1-18/+20
The bonding driver calls ndo_vlan_rx_register() while holding bond->lock. The bnx2 driver calls bnx2_netif_stop() to stop the rx handling while changing the vlgrp. The call also stops the cnic driver which sleeps while the bond->lock is held and cause the warning. This code path only needs to stop the NAPI rx handling while we are changing the vlgrp. Since no reset is going to occur, there is no need to stop cnic in this case. By adding a parameter to bnx2_netif_stop() to skip stopping cnic, we can avoid the warning. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-27bnx2: Fix lost MSI-X problem on 5709 NICs.Michael Chan1-1/+5
It has been reported that under certain heavy traffic conditions in MSI-X mode, the driver can lose an MSI-X vector causing all packets in the associated rx/tx ring pair to be dropped. The problem is caused by the chip dropping the write to unmask the MSI-X vector by the kernel (when migrating the IRQ for example). This can be prevented by increasing the GRC timeout value for these register read and write operations. Thanks to Dell for helping us debug this problem. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-27cxgb3: Wait longer for control packets on initializationAndre Detsch1-1/+1
In some Power7 platforms, when using VIOS (Virtual I/O Server), we need to wait longer for control packets to finish transfer during initialization. Without this change, initialization may fail prematurely. Signed-off-by: Wen Xiong <wenxiong@us.ibm.com> Signed-off-by: Andre Detsch <adetsch@br.ibm.com> Acked-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-27e1000e: enable/disable ASPM L0s and L1 and ERT according to hardware errataBruce Allan3-40/+55
Prompted by a previous patch submitted by Matthew Garret <mjg@redhat.com>, further digging into errata documentation reveals the current enabling or disabling of ASPM L0s and L1 states for certain parts supported by this driver are incorrect. 82571 and 82572 should always disable L1. For standard frames, 82573/82574/82583 can enable L1 but L0s must be disabled, and for jumbo frames 82573/82574 must disable L1. This allows for some parts to enable L1 in certain configurations leading to better power savings. Also according to the same errata, Early Receive (ERT) should be disabled on 82573 when using jumbo frames. Cc: Matthew Garret <mjg@redhat.com> Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-27ixgbe: Power down PHY during driver resetsPeter Waskiewicz3-24/+62
The PHY laser is still on during driver init. It's allowing garbage to hit our FIFO, which eventually can cause the entire device to die. Power down the laser while setting up the device, and re-enable the laser before getting link. Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-27Merge branch 'drm-linus' of ↵Linus Torvalds8-14/+25
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: drm/radeon: Fix sparc regression in r300_scratch() drm: make sure vblank interrupts are disabled at DPMS time drm/radeon/kms/evergreen: No EnableYUV table drm/radeon: 9800 SE has only one quadpipe drm/radeon/kms: don't print error for legal crtcs. drm/radeon/kms/evergreen: fix LUT setup
2010-04-27watchdog: booke_wdt: fix build - unconstify watchdog_infoAnton Vorontsov1-1/+1
commit 42747d712de56cf2087b702d2ad90af114c53138 ("[WATCHDOG] watchdog_info constify") introduced the following build failure: CC booke_wdt.o booke_wdt.c: In function 'booke_wdt_init': booke_wdt.c:220: error: assignment of read-only variable 'ident' Fix this by removing 'const' qualifier from watchdog_info struct. Signed-off-by: Anton Vorontsov <avorontsov@mvista.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> Cc: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2010-04-27mtd: ensure that bdi entries are properly initialized and registeredJens Axboe1-4/+42
They will be holding dirty inodes and be responsible for flushing them out, so they need to be setup properly. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-04-27Move mtd_bdi_*mappable to mtdcore.cJörn Engel4-62/+33
Removes one .h and one .c file that are never used outside of mtdcore.c. Signed-off-by: Joern Engel <joern@logfs.org> Edited to remove on leftover debug define. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-04-27drm/radeon: Fix sparc regression in r300_scratch()David Miller1-1/+1
Commit b4fe945405e477cded91772b4fec854705443dd5 ("drm/radeon: Fix memory allocation failures in the preKMS command stream checking.") added a regression in that it completely tossed the get_unaligned() done by r300_scratch() which we added in commit 958a6f8ccb1964adc3eec84cf401c5baeb4fbca0 ("drm: radeon: Fix unaligned access in r300_scratch()."). Put it back. Signed-off-by: David S. Miller <davem@davemloft.net> Acked-by: Matt Turner <mattst88@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-04-27drm: make sure vblank interrupts are disabled at DPMS timeJesse Barnes1-0/+1
When we call drm_vblank_off() at DPMS off time (to wake any clients so they don't hang) we need to make sure interrupts are actually disabled. If drm_vblank_off() gets called before the vblank usage timer expires, it'll prevent the timer from disabling interrupts since it also clears the vblank_enabled flag for the pipe. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-04-26r8169: more broken register writes workaroundfrançois romieu1-0/+5
78f1cd02457252e1ffbc6caa44a17424a45286b8 ("fix broken register writes") does not work for Al Viro's r8169 (XID 18000000). Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-26r8169: failure to enable mwi should not be fatalfrançois romieu1-14/+13
Few (6) network drivers enable mwi explicitly. Fewer worry about a failure. It is not a fix but it should avoid some annoyance like http://bugzilla.kernel.org/show_bug.cgi?id=15454 Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Conrad Kostecki <conikost@gmx.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-26watchdog: sbc_fitpc2_wdt: fixed "scheduling while atomic" bug.Denis Turischev1-5/+5
spinlock need to be replaced by mutex because of sleep functions inside wdt_send_data. Signed-off-by: Denis Turischev <denis@compulab.co.il> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2010-04-26p54pci: fix bugs in p54p_check_tx_ringHans de Goede1-1/+1
Hans de Goede identified a bug in p54p_check_tx_ring: there are two ring indices. 1 => tx data and 3 => tx management. But the old code had a constant "1" and this resulted in spurious dma unmapping failures. Cc: stable@kernel.org Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=583623 Bug-Identified-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-26watchdog: sbc_fitpc2_wdt: fixed I/O operations orderDenis Turischev1-2/+2
There are fitpc2 compatible boards that hang with existent i/o operations order. Solution is to switch between writing to data and command ports. Signed-off-by: Denis Turischev <denis@compulab.co.il> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2010-04-26tg3: Fix INTx fallback when MSI failsAndre Detsch1-0/+1
tg3: Fix INTx fallback when MSI fails MSI setup changes the value of irq_vec in struct tg3 *tp. This attribute must be taken into account and restored before we try to do a new request_irq for INTx fallback. In powerpc, the original code was leading to an EINVAL return within request_irq, because the driver was trying to use the disabled MSI virtual irq number instead of tp->pdev->irq. Signed-off-by: Andre Detsch <adetsch@br.ibm.com> Acked-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-26Watchdog: sb_wdog.c: Fix sibyte watchdog initializationGuenter Roeck1-2/+2
Watchdog configuration register and timer count register were interchanged, causing wrong values to be written into both registers. This caused watchdog triggered resets even if the watchdog was reset in time. Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Acked-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2010-04-26pcmcia: fix matching rules for pseudo-multi-function cardsAlexander Kurz1-3/+4
Prevent PCMCIA_DEV_ID_MATCH_FUNC_ID from grabbing PFC-cards: I changed the code, so that the first matching struct pcmcia_device_id _PFC_ entry will mark the card has_pfc, preventing PCMCIA_DEV_ID_MATCH_FUNC_ID to match. [linux-pcmcia@lists.infradead.org: re-order commit message] Signed-off-by: Alexander Kurz <linux@kbdbabel.org> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-04-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds1-2/+8
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: ipv6: Fix inet6_csk_bind_conflict() e100: Fix the TX workqueue race
2010-04-24e100: Fix the TX workqueue raceAlan Cox1-2/+8
Nothing stops the workqueue being left to run in parallel with close or a few other operations. This causes double unmaps and the like. See kerneloops.org #1041230 for an example Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-24Merge branch 'fixes' of ↵Linus Torvalds2-7/+20
git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq: [CPUFREQ] use max load in conservative governor [CPUFREQ] fix a lockdep warning
2010-04-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds18-39/+644
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (22 commits) gianfar: Fix potential oops during OF address translation fsl_pq_mdio: Fix kernel oops during OF address translation tcp: bind() fix when many ports are bound rdma: potential ERR_PTR dereference rtnetlink: potential ERR_PTR dereference net: ipv6 bind to device issue ipv6: allow to send packet after receiving ICMPv6 Too Big message with MTU field less than IPV6_MIN_MTU drivers/net/usb: Add new driver ipheth cxgb3: fix linkup issue X25 fix dead unaccepted sockets KS8851: NULL pointer dereference if list is empty net: 3c574_cs fix stats.tx_bytes counter xfrm6: ensure to use the same dev when building a bundle can: Fix possible NULL pointer dereference in ems_usb.c net: Fix an RCU warning in dev_pick_tx() ipv6: Fix tcp_v6_send_response transport header setting. bridge: add a missing ntohs() 8139too: Fix a typo in the function name. mac80211: pass HT changes to driver when off channel mac80211: remove bogus TX agg state assignment ...
2010-04-24Merge branch 'for-linus' of ↵Linus Torvalds3-23/+16
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: PCI: Ensure we re-enable devices on resume x86/PCI: parse additional host bridge window resource types PCI: revert broken device warning PCI aerdrv: use correct bit defines and add 2ms delay to aer_root_reset x86/PCI: ignore Consumer/Producer bit in ACPI window descriptions
2010-04-24Merge branch 'for_linus' of ↵Linus Torvalds5-46/+302
git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86 * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86: eeepc-laptop: add missing sparse_keymap_free eeepc-wmi: Build fix asus: don't modify bluetooth/wlan on boot dell-wmi: Fix memory leak eeepc-wmi: add backlight support eeepc-wmi: use a platform device as parent device of all sub-devices eeepc-wmi: add an eeepc_wmi context structure
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-15 10:44:13 +0000