summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2010-03-15drm/radeon: unconfuse return value of radeon_asic->clear_surface_regDaniel Vetter2-3/+3
No one cares about it, so set it to void. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-03-15drm/radeon: move asic structs to radeon_asic.cDaniel Vetter2-489/+487
With these static structs gone, radeon_asic.h is a real header file and can be used as such. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-03-15drm/radeon: create radeon_asic.cDaniel Vetter4-200/+243
And move asic init plus a few related functions from radeon_device.c to it. This file will hold all the asic structures in the future, but atm they're still stuck in radeon_asic.h. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-03-15Merge branch 'radeon-for-airlied' of ../linux-2.6 into drm-linusDave Airlie21-185/+444
* 'radeon-for-airlied' of ../linux-2.6: drm/radeon/kms: prepare for more reclocking operations drm/radeon/kms: switch to condition waiting for reclocking drm/radeon/r600: add missing license and comments to r600_blit_shaders.c drm/radeon/kms: improve coding style a little drm/radeon/kms: remove dead audio/HDMI code drm/radeon/kms: enable audio engine on DCE32 drm/radeon/kms: add HDMI code for pre-DCE3 R6xx GPUs drm/radeon/kms: clean assigning HDMI blocks to encoders drm/radeon/kms: clean HDMI definitions drm/radeon/kms/rs4xx: make sure crtcs are enabled when setting timing drm/radeon/kms/r1xx: enable hw i2c drm/radeon/kms: fix i2c prescale calc on older radeons drm/radeon/kms: fix for hw i2c drm/radeon/kms: fix pal tv-out support on legacy IGP chips drm/radeon/kms: further spread spectrum fixes drm/radeon/kms: use lcd pll limits when available drm/radeon/kms/atom: spread spectrum fix drm/radeon/kms: catch atombios infinite loop and break out of it drm/radeon: add new RS880 pci id
2010-03-15Merge remote branch 'nouveau/for-airlied' into drm-linusDave Airlie17-75/+683
* nouveau/for-airlied: drm/nouveau: add module option to disable TV detection drm/nouveau: Never evict VRAM buffers to system. drm/nv50: fix connector table parsing for some cards drm/nv50: add a memory barrier to pushbuf submission drm/nouveau: print a message very early during suspend drm/nv04-nv40: Fix up the programmed horizontal sync pulse delay. drm/nouveau: Gigabyte NX85T connector table lies, it has DVI-I not HDMI drm/nouveau: add option to allow override of dcb connector table types drm/nv50: Improve PGRAPH interrupt handling. drm/nv50: Make ctxprog wait until interrupt handler is done. drm/nouveau: Fix fbcon corruption with font width not divisible by 8 drm/nv50: Remove redundant/incorrect ctxvals initialisation.
2010-03-15drm/edid: allow certain bogus edids to hit a fixup path rather than failBen Skeggs1-9/+0
Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-03-15drm: remove the EDID blob stored in the EDID property when it is disconnectedZhao Yakui1-0/+1
Now the EDID property will be updated when the corresponding EDID can be obtained from the external display device. But after the external device is plugged-out, the EDID property is not updated. In such case we still get the corresponding EDID property although it is already detected as disconnected. https://bugs.freedesktop.org/show_bug.cgi?id=26743 Signed-off-by: Zhao Yakui <yakui.zhao@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-03-15drm/vmwgfx: depends on FBRandy Dunlap1-1/+1
vmwfgx uses framebuffer interfaces, so it should depend on FB. Otherwise it has these build errors (e.g., when CONFIG_FB=m): drivers/built-in.o: In function `vmw_fb_close': (.text+0x97713): undefined reference to `unregister_framebuffer' drivers/built-in.o: In function `vmw_fb_close': (.text+0x97754): undefined reference to `framebuffer_release' drivers/built-in.o: In function `vmw_fb_init': (.text+0x97e1c): undefined reference to `framebuffer_alloc' drivers/built-in.o: In function `vmw_fb_init': (.text+0x9838d): undefined reference to `register_framebuffer' drivers/built-in.o: In function `vmw_fb_init': (.text+0x9842a): undefined reference to `framebuffer_release' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Jakob Bornecrantz <jakob@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-03-15drm: "kobject_init/kobject_add" -> "kobject_init_and_add".Robert P. J. Day2-12/+10
Replace sequential calls to kobject_init() and kobject_add() with the combo wrapper kobject_init_and_add(), which provides the same semantics. Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-03-15drm/ttm: use drm calloc large and free largeDave Airlie1-20/+3
Now that the drm core can do this, lets just use it, split the code out so TTM doesn't have to drag all of drmP.h in. Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-03-15drm/radeon/kms: prepare for more reclocking operationsRafał Miłecki1-10/+29
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-03-15drm/radeon/kms: switch to condition waiting for reclockingRafał Miłecki5-3/+12
We tried to implement interruptible waiting with timeout (it was broken anyway) which was not a good idea as explained by Andrew. It's possible to avoid using additional variable but actually it inroduces using more complex in-kernel tools. So simply add one variable for condition. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-03-15drm/radeon/r600: add missing license and comments to r600_blit_shaders.cAlex Deucher1-0/+35
R6xx+ cards need to use the 3D engine to blit data which requires quite a bit of hw state setup. Rather than pull the whole 3D driver (which normally generates the 3D state) into the DRM, we opt to use statically generated state tables. The regsiter state and shaders were hand generated to support blitting functionality. See the 3D driver or documentation for descriptions of the registers and shader instructions. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-03-15drm/radeon/kms: improve coding style a littleRafał Miłecki2-15/+13
We still have many magic numbers in HDMI/audio to define Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-03-15drm/radeon/kms: remove dead audio/HDMI codeRafał Miłecki1-35/+0
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-03-15drm/radeon/kms: enable audio engine on DCE32Rafał Miłecki1-0/+15
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-03-15drm/radeon/kms: add HDMI code for pre-DCE3 R6xx GPUsRafał Miłecki1-2/+69
Older GPUs are little different, HDMI blocks are not hard-wired, but routable. We should just find some free HDMI block and route it to choosen encoder. In case of RS6x0 there is only one HDMI block, we don't enable HDMI on RS6x00 yet however. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-03-15drm/radeon/kms: clean assigning HDMI blocks to encodersRafał Miłecki4-72/+62
We almost always used first HDMI block for first encoder and second for sencod. Exception was KLDSCP_LVTMA. Analyzing code picking DIG encoder shows the same behaviour. It shows HDMI block are related to DIGs, which relation we now use. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-03-15drm/radeon/kms: clean HDMI definitionsRafał Miłecki3-8/+13
We already know same offsets are used for different encoders/transmitters, so just numeric them instead naming incorrectly. Additionaly we found additional registers needed for RV770+ Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-03-15drm/radeon/kms/rs4xx: make sure crtcs are enabled when setting timingAlex Deucher1-0/+8
based on ddx patch from Matthias Hopf. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-03-15drm/radeon/kms/r1xx: enable hw i2cAlex Deucher1-4/+1
fixing the i2c prescale in the last patch gets it working on r1xx. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-03-15drm/radeon/kms: fix i2c prescale calc on older radeonsAlex Deucher1-9/+8
Should fix fdo bug 26430 Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-03-15drm/radeon/kms: fix for hw i2cAlex Deucher1-0/+1
use the i2c pads to drive SDA Possible fix for fdo bug 26430 Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-03-15drm/radeon/kms: fix pal tv-out support on legacy IGP chipsAlex Deucher1-5/+24
Based on ddx patch by Andrzej Hajda. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-03-15drm/radeon/kms: further spread spectrum fixesAlex Deucher2-13/+20
Adjust modeset ordering to fix spread spectrum. The spread spectrum command table relies on the crtc routing to already be set in order to work properly on some asics. Should fix fdo bug 25741. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-03-15drm/radeon/kms: use lcd pll limits when availableAlex Deucher5-5/+52
The bios has alternate pll output limits for LCD panels. If available, use these for pll divider calculations. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-03-15drm/radeon/kms/atom: spread spectrum fixAlex Deucher1-7/+50
The atom spread spectrum table does not always disable ss. Explicitly disable it and then use the atom table to enable later if needed (currently only used for LVDS). Fixes display issues on some systems. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-03-15drm/nouveau: add module option to disable TV detectionBen Skeggs3-1/+6
Intended to be used as a workaround in cases where we falsely detect that a TV is connected when it's not. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-03-15drm/nouveau: Never evict VRAM buffers to system.Francisco Jerez1-2/+1
VRAM->system is a synchronous operation: it involves scheduling a VRAM->TT DMA transfer and stalling the CPU until it's finished so that we can unbind the new memory from the translation tables. VRAM->TT can always be performed asynchronously, even if TT is already full and we have to move something out of it. Additionally, allowing VRAM->system behaves badly under heavy memory pressure because once we run out of TT, stuff starts to be moved back and forth between VRAM and system, and the TT contents are hardly renewed. Signed-off-by: Francisco Jerez <currojerez@riseup.net> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-03-15drm/radeon/kms: catch atombios infinite loop and break out of itJerome Glisse2-13/+48
In somecase the atombios code might lead to infinite loop because the GPU is in broken state, this patch track the jump history and will abort atombios execution if we are stuck executing the same jump for more than 1sec. Note that otherwise in some case we might enter an infinite loop in the kernel context which is bad. Signed-off-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-03-10drm/nv50: fix connector table parsing for some cardsBen Skeggs3-4/+6
The connector table index in the DCB entry for each output type is an index into the connector table, and does *not* necessarily match up with what was previously called "index" in the connector table entries themselves. Not real sure what that index is exactly, renamed to "index2" as we still use it to prevent creating multiple TV connectors. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-03-10drm/nv50: add a memory barrier to pushbuf submissionMaarten Maathuis1-0/+5
- This is useful for vram pushbuffers that are write combined. - pre-nv50 has one too (in WRITE_PUT). Signed-off-by: Maarten Maathuis <madman2003@gmail.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-03-10drm/nouveau: print a message very early during suspendMaarten Maathuis1-0/+2
- In case of suspend lockups it's nice to know it happened in nouveau. Signed-off-by: Maarten Maathuis <madman2003@gmail.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-03-10drm/nv04-nv40: Fix up the programmed horizontal sync pulse delay.Francisco Jerez1-3/+3
The calculated values were a little bit off (~16 clocks), the only effect it could have had is a slightly offset image with respect to the blob on analog outputs (bug 26790). Signed-off-by: Francisco Jerez <currojerez@riseup.net> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-03-10drm/nouveau: Gigabyte NX85T connector table lies, it has DVI-I not HDMIBen Skeggs1-0/+17
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-03-10drm/nouveau: add option to allow override of dcb connector table typesBen Skeggs3-1/+12
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-03-10drm/nv50: Improve PGRAPH interrupt handling.Marcin Kościelnicki7-56/+622
This makes nouveau recognise and report more kinds of PGRAPH errors, as well as prevent GPU lockups resulting from some of them. Lots of guesswork was involved and some part of this is probably incorrect. Some potential-lockuop situations are handled by just resetting a whole PGRAPH subunit, which doesn't sound like a "proper" solution, but seems to work just fine... for now. Signed-off-by: Marcin Kościelnicki <koriakin@0x04.net> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-03-10drm/nv50: Make ctxprog wait until interrupt handler is done.Marcin Kościelnicki1-0/+5
This will fix races between generated ctxprogs and interrupt handler. Signed-off-by: Marcin Kościelnicki <koriakin@0x04.net> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-03-10drm/nouveau: Fix fbcon corruption with font width not divisible by 8Marcin Kościelnicki2-4/+4
NV50 is nice and has a switch that autoaligns stuff for us. Pre-NV50, we need to align input bitmap width manually. Signed-off-by: Marcin Kościelnicki <koriakin@0x04.net> Signed-off-by: Francisco Jerez <currojerez@riseup.net> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-03-10drm/nv50: Remove redundant/incorrect ctxvals initialisation.Marcin Kościelnicki1-4/+0
11c/004 offset corresponds to PGRAPH reg 0x400828, and is initialised earlier anyway by both our ctxprog generator and blob ctxvals. It's actually incorrect with the generator, since we use different layout on pre-NVA0. Signed-off-by: Marcin Kościelnicki <koriakin@0x04.net> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-03-03vga_switcheroo: disable default y by new rules.Dave Airlie1-1/+0
Another undocumented rule of kernel folklore, no default y config options anymore, apparantly hinting to distros they might want something isn't preferred anymore. Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-03-03drm/nouveau: fix *staging* driver build with switcheroo off.Dave Airlie1-1/+1
This driver is in *staging*. Fix the build with the switcheroo off. Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-03-02drm/radeon: fix typo in MakefileAlex Deucher1-1/+1
Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-03-01vga_switcheroo: fix build on platforms with no ACPIDave Airlie6-5/+24
radeon was always including the atpx code unnecessarily, also core switcheroo was including acpi headers. Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-03-01drm/radeon: Fix printf type warning in 64bit system.Pauli Nieminen1-2/+2
Type of iterator was promoted to unsigned long in 64bit systems. *header is small structure so it is alwas safe to cast return value of sizeof operator to int. Signed-off-by: Pauli Nieminen <suokkos@gmail.com>
2010-03-01drm/radeon/kms: bump the KMS version number for square tiling support.Dave Airlie1-1/+3
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-03-01Merge branch 'gpu-switcher' of /ssd/git//linux-2.6 into drm-next-stageDave Airlie23-71/+1043
* 'gpu-switcher' of /ssd/git//linux-2.6: vga_switcheroo: initial implementation (v15) fb: for framebuffer handover don't exit the loop early. Conflicts: drivers/gpu/drm/i915/i915_dma.c drivers/gpu/drm/radeon/Makefile drivers/gpu/drm/radeon/radeon.h
2010-03-01vga_switcheroo: initial implementation (v15)Dave Airlie22-70/+1044
Many new laptops now come with 2 gpus, one to be used for low power modes and one for gaming/on-ac applications. These GPUs are typically wired to the laptop panel and VGA ports via a multiplexer unit which is controlled via ACPI methods. 4 combinations of systems typically exist - with 2 ACPI methods. Intel/ATI - Lenovo W500/T500 - use ATPX ACPI method ATI/ATI - some ASUS - use ATPX ACPI Method Intel/Nvidia - - use _DSM ACPI method Nvidia/Nvidia - - use _DSM ACPI method. TODO: This patch adds support for the ATPX method and initial bits for the _DSM methods that need to written by someone with access to the hardware. Add a proper non-debugfs interface - need to get some proper testing first. v2: add power up/down support for both devices on W500 puts i915/radeon into D3 and cuts power to radeon. v3: redo probing methods, no DMI list, drm devices call to register with switcheroo, it tries to find an ATPX method on any device and once there is two devices + ATPX it inits the switcher. v4: ATPX msg handling using buffers - should work on more machines v5: rearchitect after more mjg59 discussion - move ATPX handling to radeon driver. v6: add file headers + initial nouveau bits (to be filled out). v7: merge delayed switcher code. v8: avoid suspend/resume of gpu that is off v9: rearchitect - mjg59 is always right. - move all ATPX code to radeon, should allow simpler DSM also proper ATRM handling v10: add ATRM support for radeon BIOS, add mutex to lock vgasr_priv v11: fix bug in resuming Intel for 2nd time. v12: start fixing up nvidia code blindly. v13: blindly guess at finishing nvidia code v14: remove radeon audio hacks - fix up intel resume more like upstream v15: clean up printks + remove unnecessary igd/dis pointers mount debugfs /sys/kernel/debug/vgaswitcheroo/switch - should exist if ATPX detected + 2 cards. DIS - immediate change to discrete IGD - immediate change to IGD DDIS - delayed change to discrete DIGD - delayed change to IGD ON - turn on not in use OFF - turn off not in use Tested on W500 (Intel/ATI) and T500 (Intel/ATI) Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-03-01drm/radeon/kms: do not disable audio engine twiceRafał Miłecki1-1/+0
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-03-01Revert "drm/radeon/kms: disable HDMI audio for now on rv710/rv730"Rafał Miłecki1-1/+1
This commit "disabled" audio on RV710 and RV740 only, leaving RV770 and RV730. The order is: CHIP_RV770 < CHIP_RV730 < CHIP_RV710 < CHIP_RV740. It is not needed anway, as we do not even try to enable audio on RV770 and newer. We call initializing function in r600.c only, not in rv770.c. If there is something causing green tinges, it's HDMI mode setting for encoder and I will try to debug that. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-21 03:11:22 +0000