| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are some small char/misc and other subsystem driver fixes for
6.2-rc5 to resolve a few reported issues. They include:
- long time pending fastrpc fixes (should have gone into 6.1, my
fault)
- mei driver/bus fixes and new device ids
- interconnect driver fixes for reported problems
- vmci bugfix
- w1 driver bugfixes for reported problems
Almost all of these have been in linux-next with no reported problems,
the rest have all passed 0-day bot testing in my tree and on the
mailing lists where they have sat too long due to me taking a long
time to catch up on my pending patch queue"
* tag 'char-misc-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
VMCI: Use threaded irqs instead of tasklets
misc: fastrpc: Pass bitfield into qcom_scm_assign_mem
gsmi: fix null-deref in gsmi_get_variable
misc: fastrpc: Fix use-after-free race condition for maps
misc: fastrpc: Don't remove map on creater_process and device_release
misc: fastrpc: Fix use-after-free and race in fastrpc_map_find
misc: fastrpc: fix error code in fastrpc_req_mmap()
mei: me: add meteor lake point M DID
mei: bus: fix unlink on bus in error path
w1: fix WARNING after calling w1_process()
w1: fix deadloop in __w1_remove_master_device()
comedi: adv_pci1760: Fix PWM instruction handling
interconnect: qcom: rpm: Use _optional func for provider clocks
interconnect: qcom: msm8996: Fix regmap max_register values
interconnect: qcom: msm8996: Provide UFS clocks to A2NoC
dt-bindings: interconnect: Add UFS clocks to MSM8996 A2NoC
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core fixes from Greg KH:
"Here are three small driver and kernel core fixes for 6.2-rc5. They
include:
- potential gadget fixup in do_prlimit
- device property refcount leak fix
- test_async_probe bugfix for reported problem"
* tag 'driver-core-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
prlimit: do_prlimit needs to have a speculation check
driver core: Fix test_async_probe_init saves device in wrong array
device property: fix of node refcount leak in fwnode_graph_get_next_endpoint()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver fix from Greg KH:
"Here is a single staging driver fix for 6.2-rc5. It resolves a build
issue reported and Fixed by Arnd in the vc04_services driver. It's
been in linux-next this week with no reported problems"
* tag 'staging-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: vchiq_arm: fix enum vchiq_status return types
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver fixes from Greg KH:
"Here are some small tty and serial driver fixes for 6.2-rc5 that
resolve a number of tiny reported issues and some new device ids. They
include:
- new device id for the exar serial driver
- speakup tty driver bugfix
- atmel serial driver baudrate fixup
- stm32 serial driver bugfix and then revert as the bugfix broke the
build. That will come back in a later pull request once it is all
worked out properly.
- amba-pl011 serial driver rs486 mode bugfix
- qcom_geni serial driver bugfix
Most of these have been in linux-next with no reported problems (well,
other than the build breakage which generated the revert), the new
device id passed 0-day testing"
* tag 'tty-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: exar: Add support for Sealevel 7xxxC serial cards
Revert "serial: stm32: Merge hard IRQ and threaded IRQ handling into single IRQ handler"
tty: serial: qcom_geni: avoid duplicate struct member init
serial: atmel: fix incorrect baudrate setup
tty: fix possible null-ptr-defer in spk_ttyio_release
serial: stm32: Merge hard IRQ and threaded IRQ handling into single IRQ handler
serial: amba-pl011: fix high priority character transmission in rs486 mode
serial: pch_uart: Pass correct sg to dma_unmap_sg()
tty: serial: qcom-geni-serial: fix slab-out-of-bounds on RX FIFO buffer
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt fixes from Greg KH:
"Here are a number of small USB and Thunderbolt driver fixes and new
device id changes for 6.2-rc5. Included in here are:
- thunderbolt bugfixes for reported problems
- new usb-serial driver ids added
- onboard_hub usb driver fixes for much-reported problems
- xhci bugfixes
- typec bugfixes
- ehci-fsl driver module alias fix
- iowarrior header size fix
- usb gadget driver fixes
All of these, except for the iowarrior fix, have been in linux-next
with no reported issues. The iowarrior fix passed the 0-day testing
and is a one digit change based on a reported problem in the driver
(which was written to a spec, not the real device that is now
available)"
* tag 'usb-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (40 commits)
USB: misc: iowarrior: fix up header size for USB_DEVICE_ID_CODEMERCS_IOW100
usb: host: ehci-fsl: Fix module alias
usb: dwc3: fix extcon dependency
usb: core: hub: disable autosuspend for TI TUSB8041
USB: fix misleading usb_set_intfdata() kernel doc
usb: gadget: f_ncm: fix potential NULL ptr deref in ncm_bitrate()
USB: gadget: Add ID numbers to configfs-gadget driver names
usb: typec: tcpm: Fix altmode re-registration causes sysfs create fail
usb: gadget: g_webcam: Send color matching descriptor per frame
usb: typec: altmodes/displayport: Use proper macro for pin assignment check
usb: typec: altmodes/displayport: Fix pin assignment calculation
usb: typec: altmodes/displayport: Add pin assignment helper
usb: gadget: f_fs: Ensure ep0req is dequeued before free_request
usb: gadget: f_fs: Prevent race during ffs_ep0_queue_wait
usb: misc: onboard_hub: Move 'attach' work to the driver
usb: misc: onboard_hub: Invert driver registration order
usb: ucsi: Ensure connector delayed work items are flushed
usb: musb: fix error return code in omap2430_probe()
usb: chipidea: core: fix possible constant 0 if use IS_ERR(ci->role_switch)
xhci: Detect lpm incapable xHC USB3 roothub ports from ACPI tables
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- fix a potential race condition and always set GPIOs used as interrupt
source to input in gpio-mxc
- fix a GPIO ACPI-related issue with system suspend on Clevo NL5xRU
* tag 'gpio-fixes-for-v6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpiolib: acpi: Add a ignore wakeup quirk for Clevo NL5xRU
gpiolib: acpi: Allow ignoring wake capability on pins that aren't in _AEI
gpio: mxc: Always set GPIOs used as interrupt source to INPUT mode
gpio: mxc: Protect GPIO irqchip RMW with bgpio spinlock
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
- Compilation fix for Sunplus sp7021
- Add some missing headers after a cleanup to the Nomadik driver
- Fix pull type and mux routes on Rockchip RK3568
* tag 'pinctrl-v6.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: rockchip: fix mux route data for rk3568
pinctrl: rockchip: fix reading pull type on rk3568
pinctrl: nomadik: Add missing header(s)
pinctrl: sp7021: fix unused function warning
|
|
Pull rdma fixes from Jason Gunthorpe:
- Several hfi1 patches fixing some long standing driver bugs
- Overflow when working with sg lists with elements greater than 4G
- An rxe regression with object numbering after the mrs reach their
limit
- A theoretical problem with the scatterlist merging code
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
lib/scatterlist: Fix to calculate the last_pg properly
IB/hfi1: Remove user expected buffer invalidate race
IB/hfi1: Immediately remove invalid memory from hardware
IB/hfi1: Fix expected receive setup error exit issues
IB/hfi1: Reserve user expected TIDs
IB/hfi1: Reject a zero-length user expected buffer
RDMA/core: Fix ib block iterator counter overflow
RDMA/rxe: Prevent faulty rkey generation
RDMA/rxe: Fix inaccurate constants in rxe_type_info
|
|
Pull block fixes from Jens Axboe:
"Various little tweaks all over the place:
- NVMe pull request via Christoph:
- fix controller shutdown regression in nvme-apple (Janne Grunau)
- fix a polling on timeout regression in nvme-pci (Keith Busch)
- Fix a bug in the read request side request allocation caching
(Pavel)
- pktcdvd was brought back after we configured a NULL return on bio
splits, make it consistent with the others (me)
- BFQ refcount fix (Yu)
- Block cgroup policy activation fix (Yu)
- Fix for an md regression introduced in the 6.2 cycle (Adrian)"
* tag 'block-6.2-2023-01-20' of git://git.kernel.dk/linux:
nvme-pci: fix timeout request state check
nvme-apple: only reset the controller when RTKit is running
nvme-apple: reset controller during shutdown
block: fix hctx checks for batch allocation
block/rnbd-clt: fix wrong max ID in ida_alloc_max
blk-cgroup: fix missing pd_online_fn() while activating policy
pktcdvd: check for NULL returna fter calling bio_split_to_limits()
block, bfq: switch 'bfqg->ref' to use atomic refcount apis
md: fix incorrect declaration about claim_rdev in md_import_device
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control fix from Rafael Wysocki:
"Modify __thermal_cooling_device_register() to make it call
put_device() after invoking device_register() and fix up a few error
paths calling thermal_cooling_device_destroy_sysfs() unnecessarily
(Viresh Kumar)"
* tag 'thermal-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal: core: call put_device() only after device_register() fails
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These update the ACPICA entry in MAINTAINERS, add a backlight handling
quirk and fix the ACPI PRM (platform runtime) mechanism support.
Specifics:
- Update the ACPICA development list address in MAINTAINERS to the
new one that does not bounce (Rafael Wysocki)
- Check whether EFI runtime is available when registering the ACPI
PRM address space handler and when running it (Ard Biesheuvel)
- Add backlight=native DMI quirk for Acer Aspire 4810T to the ACPI
video driver (Hans de Goede)"
* tag 'acpi-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: PRM: Check whether EFI runtime is available
ACPI: video: Add backlight=native DMI quirk for Acer Aspire 4810T
MAINTAINERS: Update the ACPICA development list address
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC fixes from Ulf Hansson:
- sunxi-mmc: Fix clock refcount imbalance during unbind
- sdhci-esdhc-imx: Fix some tuning settings
* tag 'mmc-v6.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: sunxi-mmc: Fix clock refcount imbalance during unbind
mmc: sdhci-esdhc-imx: correct the tuning start tap and step setting
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC DT and driver fixes from Arnd Bergmann:
"Lots of dts fixes for Qualcomm Snapdragon and NXP i.MX platforms,
including:
- A regression fix for SDHCI controllers on Inforce 6540, and another
SDHCI fix on SM8350
- Reenable cluster idle on sm8250 after the the code fix is upstream
- multiple fixes for the QMP PHY binding, needing an incompatible dt
change
- The reserved memory map is updated on Xiaomi Mi 4C and Huawei Nexus
6P, to avoid instabilities caused by use of protected memory
regions
- Fix i.MX8MP DT for missing GPC Interrupt, power-domain typo and USB
clock error
- A couple of verdin-imx8mm DT fixes for audio playback support
- Fix pca9547 i2c-mux node name for i.MX and Vybrid device trees
- Fix an imx93-11x11-evk uSDHC pad setting problem that causes Micron
eMMC CMD8 CRC error in HS400ES/HS400 mode
The remaining ARM and RISC-V platforms only have very few smaller dts
bugfixes this time:
- A fix for the SiFive unmatched board's PCI memory space
- A revert to fix a regression with GPIO on Marvell Armada
- A fix for the UART address on Marvell AC5
- Missing chip-select phandles for stm32 boards
- Selecting the correct clock for the sam9x60 memory controller
- Amlogic based Odroid-HC4 needs a revert to restore USB
functionality.
And finally, there are some minor code fixes:
- Build fixes for OMAP1, pxa, riscpc, raspberry pi firmware, and zynq
firmware
- memory controller driver fixes for an OMAP regression and older
bugs on tegra, atmel and mvebu
- reset controller fixes for ti-sci and uniphier platforms
- ARM SCMI firmware fixes for a couple of rare corner cases
- Qualcomm platform driver fixes for incorrect error handling and a
backwards compatibility fix for the apr driver using older dtb
- NXP i.MX SoC driver fixes for HDMI output, error handling in the
imx8 soc-id and missing reference counting on older cpuid code"
* tag 'soc-fixes-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (60 commits)
firmware: zynqmp: fix declarations for gcc-13
ARM: dts: stm32: Fix qspi pinctrl phandle for stm32mp151a-prtt1l
ARM: dts: stm32: Fix qspi pinctrl phandle for stm32mp157c-emstamp-argon
ARM: dts: stm32: Fix qspi pinctrl phandle for stm32mp15xx-dhcom-som
ARM: dts: stm32: Fix qspi pinctrl phandle for stm32mp15xx-dhcor-som
ARM: dts: at91: sam9x60: fix the ddr clock for sam9x60
ARM: omap1: fix building gpio15xx
ARM: omap1: fix !ARCH_OMAP1_ANY link failures
firmware: raspberrypi: Fix type assignment
arm64: dts: qcom: msm8992-libra: Fix the memory map
arm64: dts: qcom: msm8992: Don't use sfpb mutex
PM: AVS: qcom-cpr: Fix an error handling path in cpr_probe()
arm64: dts: msm8994-angler: fix the memory map
arm64: dts: marvell: AC5/AC5X: Fix address for UART1
ARM: footbridge: drop unnecessary inclusion
Revert "ARM: dts: armada-39x: Fix compatible string for gpios"
Revert "ARM: dts: armada-38x: Fix compatible string for gpios"
ARM: pxa: enable PXA310/PXA320 for DT-only build
riscv: dts: sifive: fu740: fix size of pcie 32bit memory
soc: qcom: apr: Make qcom,protection-domain optional again
...
|
|
Pull drm fixes from Dave Airlie:
"Just a pretty regular week for this stage of things, amdgpu and i915,
along with some msm and misc others.
fb-helper:
- switcheroo fix
msm:
- kexec shutdown fix
- fix potential double free
i915:
- Reject display plane with height == 0
- re-disable RC6p on Sandy Bridge
- Fix hugepages' selftest
- DG2 hw workarounds
- switcheroo fix
vc4:
- fix a memory leak
panfrost:
- Kconfig fix
amdgpu:
- Fix display scaling
- Fix RN/CZN power reporting on some firmware versions
- Colorspace fixes
- Fix resource freeing in error case in CS IOCTL
- Fix warning on driver unload
- GC11 fixes
- DCN 3.1.4/5 S/G display workarounds"
* tag 'drm-fixes-2023-01-20' of git://anongit.freedesktop.org/drm/drm: (24 commits)
drm/amd/display: disable S/G display on DCN 3.1.4
drm/amd/display: disable S/G display on DCN 3.1.5
drm/amdgpu: allow multipipe policy on ASICs with one MEC
drm/amdgpu: correct MEC number for gfx11 APUs
drm/amd/display: fix issues with driver unload
drm/amdgpu: fix amdgpu_job_free_resources v2
drm/amd/display: Fix COLOR_SPACE_YCBCR2020_TYPE matrix
drm/amd/display: Calculate output_color_space after pixel encoding adjustment
drm/amdgpu: fix cleaning up reserved VMID on release
drm/amdgpu: Correct the power calcultion for Renior/Cezanne.
drm/amd/display: Fix set scaling doesn's work
drm/i915: Remove unused variable
drm/i915/dg2: Introduce Wa_18019271663
drm/i915/dg2: Introduce Wa_18018764978
drm/fb-helper: Set framebuffer for vga-switcheroo clients
drm/i915: Allow switching away via vga-switcheroo if uninitialized
drm/i915/selftests: Unwind hugepages to drop wakeref on error
drm/i915: re-disable RC6p on Sandy Bridge
drm/panfrost: fix GENERIC_ATOMIC64 dependency
drm/i915/display: Check source height is > 0
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine fixes from Vinod Koul:
- email address Update for Jie Hai
- fix double increment of client_count in dma_chan_get()
- idxd driver fixes: use after free, probe error handling and callback
on wq disable
- fix for qcom gpi driver GO tre
- ptdma locking fix
- tegra & imx-sdma mem leak fix
* tag 'dmaengine-fix-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine:
ptdma: pt_core_execute_cmd() should use spinlock
dmaengine: tegra: Fix memory leak in terminate_all()
dmaengine: xilinx_dma: call of_node_put() when breaking out of for_each_child_of_node()
dmaengine: imx-sdma: Fix a possible memory leak in sdma_transfer_init
dmaengine: Fix double increment of client_count in dma_chan_get()
dmaengine: tegra210-adma: fix global intr clear
Add exception protection processing for vd in axi_chan_handle_err function
dmaengine: lgm: Move DT parsing after initialization
MAINTAINERS: update Jie Hai's email address
dmaengine: ti: k3-udma: Do conditional decrement of UDMA_CHAN_RT_PEER_BCNT_REG
dmaengine: idxd: Do not call DMX TX callbacks during workqueue disable
dmaengine: idxd: Prevent use after free on completion memory
dmaengine: idxd: Let probe fail when workqueue cannot be enabled
dmaengine: qcom: gpi: Set link_rx bit on GO TRE for rx operation
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy
Pull phy fixes from Vinod Koul:
- binding fix for g12a phys
- Kconfig operator precedence for TI driver
- renesas: register setting
- sunplus: null deref fix
- rockchip-inno fix for clk_disable_unprepare()
- MDM9607 init sequence revert due to regression
* tag 'phy-fixes-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy:
phy: phy-can-transceiver: Skip warning if no "max-bitrate"
dt-bindings: phy: g12a-usb2-phy: fix compatible string documentation
dt-bindings: phy: g12a-usb3-pcie-phy: fix compatible string documentation
phy: freescale: imx8m-pcie: Add one missing error return
phy: Revert "phy: qualcomm: usb28nm: Add MDM9607 init sequence"
phy: rockchip-inno-usb2: Fix missing clk_disable_unprepare() in rockchip_usb2phy_power_on()
phy: renesas: r8a779f0-eth-serdes: Fix register setting
phy: usb: sunplus: Fix potential null-ptr-deref in sp_usb_phy_probe()
phy: ti: fix Kconfig warning and operator precedence
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from wireless, bluetooth, bpf and netfilter.
Current release - regressions:
- Revert "net: team: use IFF_NO_ADDRCONF flag to prevent ipv6
addrconf", fix nsna_ping mode of team
- wifi: mt76: fix bugs in Rx queue handling and DMA mapping
- eth: mlx5:
- add missing mutex_unlock in error reporter
- protect global IPsec ASO with a lock
Current release - new code bugs:
- rxrpc: fix wrong error return in rxrpc_connect_call()
Previous releases - regressions:
- bluetooth: hci_sync: fix use of HCI_OP_LE_READ_BUFFER_SIZE_V2
- wifi:
- mac80211: fix crashes on Rx due to incorrect initialization of
rx->link and rx->link_sta
- mac80211: fix bugs in iTXQ conversion - Tx stalls, incorrect
aggregation handling, crashes
- brcmfmac: fix regression for Broadcom PCIe wifi devices
- rndis_wlan: prevent buffer overflow in rndis_query_oid
- netfilter: conntrack: handle tcp challenge acks during connection
reuse
- sched: avoid grafting on htb_destroy_class_offload when destroying
- virtio-net: correctly enable callback during start_xmit, fix stalls
- tcp: avoid the lookup process failing to get sk in ehash table
- ipa: disable ipa interrupt during suspend
- eth: stmmac: enable all safety features by default
Previous releases - always broken:
- bpf:
- fix pointer-leak due to insufficient speculative store bypass
mitigation (Spectre v4)
- skip task with pid=1 in send_signal_common() to avoid a splat
- fix BPF program ID information in BPF_AUDIT_UNLOAD as well as
PERF_BPF_EVENT_PROG_UNLOAD events
- fix potential deadlock in htab_lock_bucket from same bucket
index but different map_locked index
- bluetooth:
- fix a buffer overflow in mgmt_mesh_add()
- hci_qca: fix driver shutdown on closed serdev
- ISO: fix possible circular locking dependency
- CIS: hci_event: fix invalid wait context
- wifi: brcmfmac: fixes for survey dump handling
- mptcp: explicitly specify sock family at subflow creation time
- netfilter: nft_payload: incorrect arithmetics when fetching VLAN
header bits
- tcp: fix rate_app_limited to default to 1
- l2tp: close all race conditions in l2tp_tunnel_register()
- eth: mlx5: fixes for QoS config and eswitch configuration
- eth: enetc: avoid deadlock in enetc_tx_onestep_tstamp()
- eth: stmmac: fix invalid call to mdiobus_get_phy()
Misc:
- ethtool: add netlink attr in rss get reply only if the value is not
empty"
* tag 'net-6.2-rc5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (88 commits)
Revert "Merge branch 'octeontx2-af-CPT'"
tcp: fix rate_app_limited to default to 1
bnxt: Do not read past the end of test names
net: stmmac: enable all safety features by default
octeontx2-af: add mbox to return CPT_AF_FLT_INT info
octeontx2-af: update cpt lf alloc mailbox
octeontx2-af: restore rxc conf after teardown sequence
octeontx2-af: optimize cpt pf identification
octeontx2-af: modify FLR sequence for CPT
octeontx2-af: add mbox for CPT LF reset
octeontx2-af: recover CPT engine when it gets fault
net: dsa: microchip: ksz9477: port map correction in ALU table entry register
selftests/net: toeplitz: fix race on tpacket_v3 block close
net/ulp: use consistent error code when blocking ULP
octeontx2-pf: Fix the use of GFP_KERNEL in atomic context on rt
tcp: avoid the lookup process failing to get sk in ehash table
Revert "net: team: use IFF_NO_ADDRCONF flag to prevent ipv6 addrconf"
MAINTAINERS: add networking entries for Willem
net: sched: gred: prevent races when adding offloads to stats
l2tp: prevent lockdep issue in l2tp_tunnel_register()
...
|
|
Merge an ACPI PRM (platform runtime) support fix and an ACPI backlight
quirk for 6.2-rc5:
- Check whether EFI runtime is available when registering the ACPI PRM
address space handler and when running it (Ard Biesheuvel).
- Add backlight=native DMI quirk for Acer Aspire 4810T to the ACPI
video driver (Hans de Goede).
* acpi-prm:
ACPI: PRM: Check whether EFI runtime is available
* acpi-video:
ACPI: video: Add backlight=native DMI quirk for Acer Aspire 4810T
|
|
This reverts commit b4fbf0b27fa9dd2594b3371532341bd4636a00f9, reversing
changes made to 6c977c5c2e4c5d8ad1b604724cc344e38f96fe9b.
This seems like net-next material.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The USB_DEVICE_ID_CODEMERCS_IOW100 header size was incorrect, it should
be 12, not 13.
Cc: stable <stable@kernel.org>
Fixes: 17a82716587e ("USB: iowarrior: fix up report size handling for some devices")
Reported-by: Christoph Jung <jung@codemercs.com>
Link: https://lore.kernel.org/r/20230120135330.3842518-1-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Commit ca07e1c1e4a6 ("drivers:usb:fsl:Make fsl ehci drv an independent
driver module") changed DRV_NAME which was used for MODULE_ALIAS as well.
Starting from this the module alias didn't match the platform device
name created in fsl-mph-dr-of.c
Change DRV_NAME to match the driver name for host mode in fsl-mph-dr-of.
This is needed for module autoloading on ls1021a.
Fixes: ca07e1c1e4a6 ("drivers:usb:fsl:Make fsl ehci drv an independent driver module")
Cc: stable <stable@kernel.org>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Link: https://lore.kernel.org/r/20230120122714.3848784-1-alexander.stein@ew.tq-group.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Test names were being concatenated based on a offset beyond the end of
the first name, which tripped the buffer overflow detection logic:
detected buffer overflow in strnlen
[...]
Call Trace:
bnxt_ethtool_init.cold+0x18/0x18
Refactor struct hwrm_selftest_qlist_output to use an actual array,
and adjust the concatenation to use snprintf() rather than a series of
strncat() calls.
Reported-by: Niklas Cassel <Niklas.Cassel@wdc.com>
Link: https://lore.kernel.org/lkml/Y8F%2F1w1AZTvLglFX@x1-carbon/
Tested-by: Niklas Cassel <Niklas.Cassel@wdc.com>
Fixes: eb51365846bc ("bnxt_en: Add basic ethtool -t selftest support.")
Cc: Michael Chan <michael.chan@broadcom.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: netdev@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add support for Sealevel 7xxxC serial cards.
This patch:
* Adds IDs to recognize 7xxxC cards from Sealevel Systems.
* Updates exar_pci_probe() to set nr_ports to last two bytes of primary
dev ID for these cards.
Signed-off-by: Matthew Howell <matthew.howell@sealevel.com>
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/r/alpine.DEB.2.21.2301191440010.22558@tstest-VirtualBox
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The vmci_dispatch_dgs() tasklet function calls vmci_read_data()
which uses wait_event() resulting in invalid sleep in an atomic
context (and therefore potentially in a deadlock).
Use threaded irqs to fix this issue and completely remove usage
of tasklets.
[ 20.264639] BUG: sleeping function called from invalid context at drivers/misc/vmw_vmci/vmci_guest.c:145
[ 20.264643] in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 762, name: vmtoolsd
[ 20.264645] preempt_count: 101, expected: 0
[ 20.264646] RCU nest depth: 0, expected: 0
[ 20.264647] 1 lock held by vmtoolsd/762:
[ 20.264648] #0: ffff0000874ae440 (sk_lock-AF_VSOCK){+.+.}-{0:0}, at: vsock_connect+0x60/0x330 [vsock]
[ 20.264658] Preemption disabled at:
[ 20.264659] [<ffff80000151d7d8>] vmci_send_datagram+0x44/0xa0 [vmw_vmci]
[ 20.264665] CPU: 0 PID: 762 Comm: vmtoolsd Not tainted 5.19.0-0.rc8.20220727git39c3c396f813.60.fc37.aarch64 #1
[ 20.264667] Hardware name: VMware, Inc. VBSA/VBSA, BIOS VEFI 12/31/2020
[ 20.264668] Call trace:
[ 20.264669] dump_backtrace+0xc4/0x130
[ 20.264672] show_stack+0x24/0x80
[ 20.264673] dump_stack_lvl+0x88/0xb4
[ 20.264676] dump_stack+0x18/0x34
[ 20.264677] __might_resched+0x1a0/0x280
[ 20.264679] __might_sleep+0x58/0x90
[ 20.264681] vmci_read_data+0x74/0x120 [vmw_vmci]
[ 20.264683] vmci_dispatch_dgs+0x64/0x204 [vmw_vmci]
[ 20.264686] tasklet_action_common.constprop.0+0x13c/0x150
[ 20.264688] tasklet_action+0x40/0x50
[ 20.264689] __do_softirq+0x23c/0x6b4
[ 20.264690] __irq_exit_rcu+0x104/0x214
[ 20.264691] irq_exit_rcu+0x1c/0x50
[ 20.264693] el1_interrupt+0x38/0x6c
[ 20.264695] el1h_64_irq_handler+0x18/0x24
[ 20.264696] el1h_64_irq+0x68/0x6c
[ 20.264697] preempt_count_sub+0xa4/0xe0
[ 20.264698] _raw_spin_unlock_irqrestore+0x64/0xb0
[ 20.264701] vmci_send_datagram+0x7c/0xa0 [vmw_vmci]
[ 20.264703] vmci_datagram_dispatch+0x84/0x100 [vmw_vmci]
[ 20.264706] vmci_datagram_send+0x2c/0x40 [vmw_vmci]
[ 20.264709] vmci_transport_send_control_pkt+0xb8/0x120 [vmw_vsock_vmci_transport]
[ 20.264711] vmci_transport_connect+0x40/0x7c [vmw_vsock_vmci_transport]
[ 20.264713] vsock_connect+0x278/0x330 [vsock]
[ 20.264715] __sys_connect_file+0x8c/0xc0
[ 20.264718] __sys_connect+0x84/0xb4
[ 20.264720] __arm64_sys_connect+0x2c/0x3c
[ 20.264721] invoke_syscall+0x78/0x100
[ 20.264723] el0_svc_common.constprop.0+0x68/0x124
[ 20.264724] do_el0_svc+0x38/0x4c
[ 20.264725] el0_svc+0x60/0x180
[ 20.264726] el0t_64_sync_handler+0x11c/0x150
[ 20.264728] el0t_64_sync+0x190/0x194
Signed-off-by: Vishnu Dasa <vdasa@vmware.com>
Suggested-by: Zack Rusin <zackr@vmware.com>
Reported-by: Nadav Amit <namit@vmware.com>
Reported-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Fixes: 463713eb6164 ("VMCI: dma dg: add support for DMA datagrams receive")
Cc: <stable@vger.kernel.org> # v5.18+
Cc: VMware PV-Drivers Reviewers <pv-drivers@vmware.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Bryan Tan <bryantan@vmware.com>
Reviewed-by: Bryan Tan <bryantan@vmware.com>
Reviewed-by: Zack Rusin <zackr@vmware.com>
Link: https://lore.kernel.org/r/20221130070511.46558-1-vdasa@vmware.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The srcvm parameter of qcom_scm_assign_mem is a pointer to a bitfield of
VMIDs. The bitfield is updated with which VMIDs have permissions
after the qcom_scm_assign_mem call. This makes it simpler for clients to
make qcom_scm_assign_mem calls later, they always pass in same srcvm
bitfield and do not need to closely track whether memory was originally
shared.
When restoring permissions to HLOS, fastrpc is incorrectly using the
first VMID directly -- neither the BIT nor the other possible VMIDs the
memory was already assigned to. We already have a field intended for
this purpose: "perms" in the struct fastrpc_channel_ctx, but it was
never used. Start using the perms field.
Cc: Abel Vesa <abel.vesa@linaro.org>
Cc: Vamsi Krishna Gattupalli <quic_vgattupa@quicinc.com>
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Fixes: e90d91190619 ("misc: fastrpc: Add support to secure memory map")
Fixes: 0871561055e6 ("misc: fastrpc: Add support for audiopd")
Fixes: 532ad70c6d44 ("misc: fastrpc: Add mmap request assigning for static PD pool")
Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Elliot Berman <quic_eberman@quicinc.com>
drivers/misc/fastrpc.c | 15 ++++++---------
1 file changed, 6 insertions(+), 9 deletions(-)
Link: https://lore.kernel.org/r/20230112182313.521467-1-quic_eberman@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We can get EFI variables without fetching the attribute, so we must
allow for that in gsmi.
commit 859748255b43 ("efi: pstore: Omit efivars caching EFI varstore
access layer") added a new get_variable call with attr=NULL, which
triggers panic in gsmi.
Fixes: 74c5b31c6618 ("driver: Google EFI SMI")
Cc: stable <stable@kernel.org>
Signed-off-by: Khazhismel Kumykov <khazhy@google.com>
Link: https://lore.kernel.org/r/20230118010212.1268474-1-khazhy@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
It is possible that in between calling fastrpc_map_get() until
map->fl->lock is taken in fastrpc_free_map(), another thread can call
fastrpc_map_lookup() and get a reference to a map that is about to be
deleted.
Rewrite fastrpc_map_get() to only increase the reference count of a map
if it's non-zero. Propagate this to callers so they can know if a map is
about to be deleted.
Fixes this warning:
refcount_t: addition on 0; use-after-free.
WARNING: CPU: 5 PID: 10100 at lib/refcount.c:25 refcount_warn_saturate
...
Call trace:
refcount_warn_saturate
[fastrpc_map_get inlined]
[fastrpc_map_lookup inlined]
fastrpc_map_create
fastrpc_internal_invoke
fastrpc_device_ioctl
__arm64_sys_ioctl
invoke_syscall
Fixes: c68cfb718c8f ("misc: fastrpc: Add support for context Invoke method")
Cc: stable <stable@kernel.org>
Signed-off-by: Ola Jeppsson <ola@snap.com>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20221124174941.418450-4-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Do not remove the map from the list on error path in
fastrpc_init_create_process, instead call fastrpc_map_put, to avoid
use-after-free. Do not remove it on fastrpc_device_release either,
call fastrpc_map_put instead.
The fastrpc_free_map is the only proper place to remove the map.
This is called only after the reference count is 0.
Fixes: b49f6d83e290 ("misc: fastrpc: Fix a possible double free")
Cc: stable <stable@kernel.org>
Co-developed-by: Ola Jeppsson <ola@snap.com>
Signed-off-by: Ola Jeppsson <ola@snap.com>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20221124174941.418450-3-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Currently, there is a race window between the point when the mutex is
unlocked in fastrpc_map_lookup and the reference count increasing
(fastrpc_map_get) in fastrpc_map_find, which can also lead to
use-after-free.
So lets merge fastrpc_map_find into fastrpc_map_lookup which allows us
to both protect the maps list by also taking the &fl->lock spinlock and
the reference count, since the spinlock will be released only after.
Add take_ref argument to make this suitable for all callers.
Fixes: 8f6c1d8c4f0c ("misc: fastrpc: Add fdlist implementation")
Cc: stable <stable@kernel.org>
Co-developed-by: Ola Jeppsson <ola@snap.com>
Signed-off-by: Ola Jeppsson <ola@snap.com>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20221124174941.418450-2-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The "err" variable shadows an earlier global variable so this code
returns success instead of a negative error code.
Fixes: 532ad70c6d44 ("misc: fastrpc: Add mmap request assigning for static PD pool")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Link: https://lore.kernel.org/r/Y4XUrMETCl1O6t0A@kili
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add Meteor Lake Point M device id.
Cc: <stable@vger.kernel.org>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20221212220247.286019-2-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Unconditional call to mei_cl_unlink in mei_cl_bus_dev_release leads
to call of the mei_cl_unlink without corresponding mei_cl_link.
This leads to miscalculation of open_handle_count (decrease without
increase).
Call unlink in mei_cldev_enable fail path and remove blanket unlink
from mei_cl_bus_dev_release.
Fixes: 34f1166afd67 ("mei: bus: need to unlink client before freeing")
Cc: <stable@vger.kernel.org>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Reviewed-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20221212220247.286019-1-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc into char-misc-linus
Georgi writes:
interconnect fixes for v6.2-rc
This contains fixes for a rare boot hang issue that has been reported
on the db820c dragonboard.
- dt-bindings: interconnect: Add UFS clocks to MSM8996 A2NoC
- interconnect: qcom: msm8996: Provide UFS clocks to A2NoC
- interconnect: qcom: msm8996: Fix regmap max_register values
- interconnect: qcom: rpm: Use _optional func for provider clocks
Signed-off-by: Georgi Djakov <djakov@kernel.org>
* tag 'icc-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc:
interconnect: qcom: rpm: Use _optional func for provider clocks
interconnect: qcom: msm8996: Fix regmap max_register values
interconnect: qcom: msm8996: Provide UFS clocks to A2NoC
dt-bindings: interconnect: Add UFS clocks to MSM8996 A2NoC
|
|
IRQ handler"
This reverts commit f24771b62a83239f0dce816bddf0f6807f436235 as it is
reported to break the build.
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/202301200130.ttBiTzfO-lkp@intel.com
Fixes: f24771b62a83 ("serial: stm32: Merge hard IRQ and threaded IRQ handling into single IRQ handler")
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Valentin Caron <valentin.caron@foss.st.com> # V3
Cc: Marek Vasut <marex@denx.de>
Cc: Johan Hovold <johan@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In the original implementation of dwmac5
commit 8bf993a5877e ("net: stmmac: Add support for DWMAC5 and implement Safety Features")
all safety features were enabled by default.
Later it seems some implementations didn't have support for all the
features, so in
commit 5ac712dcdfef ("net: stmmac: enable platform specific safety features")
the safety_feat_cfg structure was added to the callback and defined for
some platforms to selectively enable these safety features.
The problem is that only certain platforms were given that software
support. If the automotive safety package bit is set in the hardware
features register the safety feature callback is called for the platform,
and for platforms that didn't get a safety_feat_cfg defined this results
in the following NULL pointer dereference:
[ 7.933303] Call trace:
[ 7.935812] dwmac5_safety_feat_config+0x20/0x170 [stmmac]
[ 7.941455] __stmmac_open+0x16c/0x474 [stmmac]
[ 7.946117] stmmac_open+0x38/0x70 [stmmac]
[ 7.950414] __dev_open+0x100/0x1dc
[ 7.954006] __dev_change_flags+0x18c/0x204
[ 7.958297] dev_change_flags+0x24/0x6c
[ 7.962237] do_setlink+0x2b8/0xfa4
[ 7.965827] __rtnl_newlink+0x4ec/0x840
[ 7.969766] rtnl_newlink+0x50/0x80
[ 7.973353] rtnetlink_rcv_msg+0x12c/0x374
[ 7.977557] netlink_rcv_skb+0x5c/0x130
[ 7.981500] rtnetlink_rcv+0x18/0x2c
[ 7.985172] netlink_unicast+0x2e8/0x340
[ 7.989197] netlink_sendmsg+0x1a8/0x420
[ 7.993222] ____sys_sendmsg+0x218/0x280
[ 7.997249] ___sys_sendmsg+0xac/0x100
[ 8.001103] __sys_sendmsg+0x84/0xe0
[ 8.004776] __arm64_sys_sendmsg+0x24/0x30
[ 8.008983] invoke_syscall+0x48/0x114
[ 8.012840] el0_svc_common.constprop.0+0xcc/0xec
[ 8.017665] do_el0_svc+0x38/0xb0
[ 8.021071] el0_svc+0x2c/0x84
[ 8.024212] el0t_64_sync_handler+0xf4/0x120
[ 8.028598] el0t_64_sync+0x190/0x194
Go back to the original behavior, if the automotive safety package
is found to be supported in hardware enable all the features unless
safety_feat_cfg is passed in saying this particular platform only
supports a subset of the features.
Fixes: 5ac712dcdfef ("net: stmmac: enable platform specific safety features")
Reported-by: Ning Cai <ncai@quicinc.com>
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
CPT HW would trigger the CPT AF FLT interrupt when CPT engines
hits some uncorrectable errors and AF is the one which receives
the interrupt and recovers the engines.
This patch adds a mailbox for CPT VFs to request for CPT faulted
and recovered engines info.
Signed-off-by: Srujana Challa <schalla@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The CN10K CPT coprocessor contains a context processor
to accelerate updates to the IPsec security association
contexts. The context processor contains a context cache.
This patch updates CPT LF ALLOC mailbox to config ctx_ilen
requested by VFs. CPT_LF_ALLOC:ctx_ilen is the size of
initial context fetch.
Signed-off-by: Srujana Challa <schalla@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
CN10K CPT coprocessor includes a component named RXC which
is responsible for reassembly of inner IP packets. RXC has
the feature to evict oldest entries based on age/threshold.
The age/threshold is being set to minimum values to evict
all entries at the time of teardown.
This patch adds code to restore timeout and threshold config
after teardown sequence is complete as it is global config.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Optimize CPT PF identification in mbox handling for faster
mbox response by doing it at AF driver probe instead of
every mbox message.
Signed-off-by: Srujana Challa <schalla@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
On OcteonTX2 platform CPT instruction enqueue is only
possible via LMTST operations.
The existing FLR sequence mentioned in HRM requires
a dummy LMTST to CPT but LMTST can't be submitted from
AF driver. So, HW team provided a new sequence to avoid
dummy LMTST. This patch adds code for the same.
Signed-off-by: Srujana Challa <schalla@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
On OcteonTX2 SoC, the admin function (AF) is the only one with all
priviliges to configure HW and alloc resources, PFs and it's VFs
have to request AF via mailbox for all their needs.
This patch adds a new mailbox for CPT VFs to request for CPT LF
reset.
Signed-off-by: Srujana Challa <schalla@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When CPT engine has uncorrectable errors, it will get halted and
must be disabled and re-enabled. This patch adds code for the same.
Signed-off-by: Srujana Challa <schalla@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-6.2-2023-01-19:
amdgpu:
- Fix display scaling
- Fix RN/CZN power reporting on some firmware versions
- Colorspace fixes
- Fix resource freeing in error case in CS IOCTL
- Fix warning on driver unload
- GC11 fixes
- DCN 3.1.4/5 S/G display workarounds
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230119195908.7670-1-alexander.deucher@amd.com
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
A fix for vc4 to address a memory leak when allocating a buffer, a
Kconfig fix for panfrost and two fixes for i915 and fb-helper to
address some bugs with vga-switcheroo.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20230119082059.h32bs7zqoxmjbcvn@houat
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
- Reject display plane with height == 0 (Drew)
- re-disable RC6p on Sandy Bridge (Sasa)
- Fix hugepages' selftest (Chris)
- DG2 hw workarounds (Matt Atwood)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Y8mf3/ANNWctpc7R@intel.com
|
|
https://gitlab.freedesktop.org/drm/msm into drm-fixes
msm-fixes for v6.3-rc5
Two GPU fixes which were meant to be part of the previous pull request,
but I'd forgotten to fetch from gitlab after the MR was merged so that
git tag was applied to the wrong commit.
- kexec shutdown fix
- fix potential double free
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGskguoVsz2wqAK2k+f32LwcVY5JC6+e2RwLqZswz3RY2Q@mail.gmail.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux
Pull printk fixes from Petr Mladek:
- Prevent a potential deadlock when configuring kgdb console
- Fix a kernel doc warning
* tag 'printk-for-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
kernel/printk/printk.c: Fix W=1 kernel-doc warning
tty: serial: kgdboc: fix mutex locking order for configure_kgdboc()
|
|
put_device() shouldn't be called before a prior call to
device_register(). __thermal_cooling_device_register() doesn't follow
that properly and needs fixing. Also
thermal_cooling_device_destroy_sysfs() is getting called unnecessarily
on few error paths.
Fix all this by placing the calls at the right place.
Based on initial work done by Caleb Connolly.
Fixes: 4748f9687caa ("thermal: core: fix some possible name leaks in error paths")
Fixes: c408b3d1d9bb ("thermal: Validate new state in cur_state_store()")
Reported-by: Caleb Connolly <caleb.connolly@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Tested-by: Frank Rowand <frowand.list@gmail.com>
Reviewed-by: Yang Yingliang <yangyingliang@huawei.com>
Tested-by: Caleb Connolly <caleb.connolly@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus
Johan writes:
"USB-serial fixes for 6.2-rc5
Here are some new device ids, mostly for Quectel modems.
All have been in linux-next with no reported issues."
* tag 'usb-serial-6.2-rc5' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
USB: serial: option: add Quectel EM05CN modem
USB: serial: option: add Quectel EM05CN (SG) modem
USB: serial: cp210x: add SCALANCE LPE-9000 device id
USB: serial: option: add Quectel EC200U modem
USB: serial: option: add Quectel EM05-G (RS) modem
USB: serial: option: add Quectel EM05-G (GR) modem
USB: serial: option: add Quectel EM05-G (CS) modem
|
|
ALU table entry 2 register in KSZ9477 have bit positions reserved for
forwarding port map. This field is referred in ksz9477_fdb_del() for
clearing forward port map and alu table.
But current fdb_del refer ALU table entry 3 register for accessing forward
port map. Update ksz9477_fdb_del() to get forward port map from correct
alu table entry register.
With this bug, issue can be observed while deleting static MAC entries.
Delete any specific MAC entry using "bridge fdb del" command. This should
clear all the specified MAC entries. But it is observed that entries with
self static alone are retained.
Tested on LAN9370 EVB since ksz9477_fdb_del() is used common across
LAN937x and KSZ series.
Fixes: b987e98e50ab ("dsa: add DSA switch driver for Microchip KSZ9477")
Signed-off-by: Rakesh Sankaranarayanan <rakesh.sankaranarayanan@microchip.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://lore.kernel.org/r/20230118174735.702377-1-rakesh.sankaranarayanan@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
