summaryrefslogtreecommitdiff
path: root/drivers/thunderbolt
AgeCommit message (Collapse)AuthorFilesLines
2020-01-08thunderbolt: Fix xhci check in usb4_switch_setup()Mika Westerberg1-1/+1
The code tried to check whether xhci variable has ROUTER_CS_6_HCI bit set but since xhci type is bool and it already holds true or false based on that very bit, fix the check to use the variable directly. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Fixes: b04079837b20 ("thunderbolt: Add initial support for USB4") Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Link: https://lore.kernel.org/r/20200108125317.36444-2-mika.westerberg@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-18thunderbolt: Add support for USB 3.x tunnelsRajmohan Mani7-27/+395
USB4 added a capability to tunnel USB 3.x protocol over the USB4 fabric. USB4 device routers may include integrated SuperSpeed HUB or a function or both. USB tunneling follows PCIe so that the tunnel is created between the parent and the child router from USB3 downstream adapter port to USB3 upstream adapter port over a single USB4 link. This adds support for USB 3.x tunneling and also capability to discover existing USB 3.x tunnels (for example created by connection manager in boot firmware). Signed-off-by: Rajmohan Mani <rajmohan.mani@intel.com> Co-developed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Link: https://lore.kernel.org/r/20191217123345.31850-9-mika.westerberg@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-18thunderbolt: Add support for Time Management UnitRajmohan Mani6-1/+483
Time Management Unit (TMU) is included in each USB4 router. It is used to synchronize time across the USB4 fabric. By default when USB4 router is plugged to the domain, its TMU is turned off. This differs from Thunderbolt (1, 2 and 3) devices whose TMU is by default configured to bi-directional HiFi mode. Since time synchronization is needed for proper Display Port tunneling this means we need to configure the TMU on USB4 compliant devices. The USB4 spec allows some flexibility on how the TMU can be configured. This makes it possible to enable link power management states (CLx) in certain topologies, where for example DP tunneling is not used. TMU can also be re-configured dynamicaly depending on types of tunnels created over the USB4 fabric. In this patch we simply configure the TMU to be in bi-directional HiFi mode. This way we can tunnel any kind of traffic without need to perform complex steps to re-configure the domain dynamically. We can add more fine-grained TMU configuration later on when we start enabling CLx states. Signed-off-by: Rajmohan Mani <rajmohan.mani@intel.com> Co-developed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Link: https://lore.kernel.org/r/20191217123345.31850-8-mika.westerberg@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-18thunderbolt: Make tb_switch_find_cap() available to other filesRajmohan Mani2-1/+11
We need to find switch capabilities in order to implement TMU support so make it available to other files as well. Signed-off-by: Rajmohan Mani <rajmohan.mani@intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Link: https://lore.kernel.org/r/20191217123345.31850-7-mika.westerberg@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-18thunderbolt: Update Kconfig entries to USB4Mika Westerberg2-6/+7
Since the driver now supports USB4 which is the standard going forward, update the Kconfig entry to mention this and rename the entry from CONFIG_THUNDERBOLT to CONFIG_USB4 instead to help people to find the correct option if they want to enable USB4. Also do the same for Thunderbolt network driver. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: David S. Miller <davem@davemloft.net> Link: https://lore.kernel.org/r/20191217123345.31850-6-mika.westerberg@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-18thunderbolt: Add initial support for USB4Mika Westerberg11-117/+1158
USB4 is the public specification based on Thunderbolt 3 protocol. There are some differences in register layouts and flows. In addition to PCIe and DP tunneling, USB4 supports tunneling of USB 3.x. USB4 is also backward compatible with Thunderbolt 3 (and older generations but the spec only talks about 3rd generation). USB4 compliant devices can be identified by checking USB4 version field in router configuration space. This patch adds initial support for USB4 compliant hosts and devices which enables following features provided by the existing functionality in the driver: - PCIe tunneling - Display Port tunneling - Host and device NVM firmware upgrade - P2P networking This brings the USB4 support to the same level that we already have for Thunderbolt 1, 2 and 3 devices. Note the spec talks about host and device "routers" but in the driver we still use term "switch" in most places. Both can be used interchangeably. Co-developed-by: Rajmohan Mani <rajmohan.mani@intel.com> Signed-off-by: Rajmohan Mani <rajmohan.mani@intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Link: https://lore.kernel.org/r/20191217123345.31850-5-mika.westerberg@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-18thunderbolt: Populate PG field in hot plug acknowledgment packetMika Westerberg4-11/+20
USB4 1.0 section 6.4.2.7 specifies a new field (PG) in notification packet that is sent as response of hot plug/unplug events. This field tells whether the acknowledgment is for plug or unplug event. This needs to be set accordingly in order the router to send further hot plug notifications. To make it simpler we fill the field unconditionally. Legacy devices do not look at this field so there should be no problems with them. While there rename tb_cfg_error() to tb_cfg_ack_plug() and update the log message accordingly. The function is only used to ack plug/unplug events. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Link: https://lore.kernel.org/r/20191217123345.31850-4-mika.westerberg@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-18thunderbolt: Call tb_eeprom_get_drom_offset() from tb_eeprom_read_n()Mika Westerberg1-45/+43
We are going to re-use tb_drom_read() for USB4 DROM reading as well. USB4 has separate router operations for this which does not need the drom_offset. Therefore we move call to tb_eeprom_get_drom_offset() into tb_eeprom_read_n() where it is needed. While there change return -ENOSYS to -ENODEV because the former is only supposed to be used with system calls (invalid syscall nr). Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Link: https://lore.kernel.org/r/20191217123345.31850-3-mika.westerberg@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-18thunderbolt: Make tb_find_port() available to other filesMika Westerberg3-20/+22
We will be needing this when adding initial USB4 support so make it available to other files in the driver as well. We also rename it to tb_switch_find_port() to follow conventions used in switch.c. No functional changes. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Link: https://lore.kernel.org/r/20191217123345.31850-2-mika.westerberg@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-19thunderbolt: Power cycle the router if NVM authentication failsMika Westerberg1-12/+42
On zang's Dell XPS 13 9370 after Thunderbolt NVM firmware upgrade the Thunderbolt controller did not come back as expected. Only after the system was rebooted it became available again. It is not entirely clear what happened but I suspect the new NVM firmware image authentication failed for some reason. Regardless of this the router needs to be power cycled if NVM authentication fails in order to get it fully functional again. This modifies the driver to issue a power cycle in case the NVM authentication fails immediately when dma_port_flash_update_auth() returns. We also need to call tb_switch_set_uuid() earlier to be able to fetch possible NVM authentication failure when DMA port is added. Link: https://bugzilla.kernel.org/show_bug.cgi?id=205457 Reported-by: zang <dump@tzib.net> Cc: stable <stable@vger.kernel.org> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-02thunderbolt: Do not start firmware unless asked by the userMika Westerberg2-8/+19
Since now we can do pretty much the same thing in the software connection manager than the firmware would do, there is no point starting it by default. Instead we can just continue using the software connection manager. Make it possible for user to switch between the two by adding a module pararameter (start_icm) which is by default false. Having this ability to enable the firmware may be useful at least when debugging possible issues with the software connection manager implementation. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-11-02thunderbolt: Add bandwidth management for Display Port tunnelsMika Westerberg6-4/+381
Titan Ridge supports Display Port 1.4 which adds HBR3 (High Bit Rate) rates that may be up to 8.1 Gb/s over 4 lanes. This translates to effective data bandwidth of 25.92 Gb/s (as 8/10 encoding is removed by the DP adapters when going over Thunderbolt fabric). If another high rate monitor is connected we may need to reduce the bandwidth it consumes so that it fits into the total 40 Gb/s available on the Thunderbolt fabric. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-11-02thunderbolt: Add Display Port adapter pairing and resource managementMika Westerberg5-34/+387
To perform proper Display Port tunneling for Thunderbolt 3 devices we need to allocate DP resources for DP IN port before they can be used. The reason for this is that the user can also connect a monitor directly to the Type-C ports in which case the Thunderbolt controller acts as re-driver for Display Port (no tunneling takes place) taking the DP sinks away from the connection manager. This allocation is done using special sink allocation registers available through the link controller. We can pair DP IN to DP OUT only if * DP IN has sink allocated via link controller * DP OUT port receives hotplug event For DP IN adapters (only for the host router) we first query whether there is DP resource available (it may be the previous instance of the driver for example already allocated it) and if it is we add it to the list. We then update the list when after each plug/unplug event to a DP IN/OUT adapter. Each time the list is updated we try to find additional DP IN <-> DP OUT pairs for tunnel establishment. This strategy also makes it possible to establish another tunnel in case there are 3 monitors connected and one gets unplugged releasing the DP IN adapter for the new tunnel. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-11-02thunderbolt: Add Display Port CM handshake for Titan Ridge devicesMika Westerberg2-0/+48
Titan Ridge needs an additional connection manager handshake in order to do proper Display Port tunneling so implement it here. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-11-02thunderbolt: Add downstream PCIe port mappings for Alpine and Titan RidgeMika Westerberg2-1/+29
In order to keep PCIe hierarchies consistent across hotplugs, add hard-coded PCIe downstream port to Thunderbolt port for Alpine Ridge and Titan Ridge as well. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-11-02thunderbolt: Expand controller name in tb_switch_is_xy()Mika Westerberg3-9/+9
For a casual reader tb_switch_is_cr() does not tell much so instead spell out the full controller name in the function name. For example tb_switch_is_cr() becomes tb_switch_is_cactus_ridge() which is easier to understand. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-11-02thunderbolt: Add default linking between lane adapters if not provided by DROMMika Westerberg2-11/+32
We currently read how sibling lane adapter ports relate each other from DROM (Device ROM). If the two lane adapter ports go through the same physical connector these lanes can then be bonded together. However, some cases DROM does not provide this information or it is missing completely (host routers typically do not have DROM). In this case we have hard-coded the relationship. Expand this to work with both legacy devices where lane adapter ports 1 and 2, and 3 and 4 are always linked together, and with USB4 devices where lane adapter 1 is always following lane adapter 0 or is disabled completely (see USB4 section 5.2.1 for more information). Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-11-02thunderbolt: Add support for lane bondingMika Westerberg9-7/+424
Lane bonding allows aggregating two 10/20 Gb/s (depending on the generation) lanes into a single 20/40 Gb/s bonded link. This allows sharing the full bandwidth more efficiently. In order to establish lane bonding we need to check that lane bonding is possible through link controller and that both ends of the link actually supports 2x widths. This also means that all the paths should be established through the primary port so update tb_path_alloc() to handle this as well. Lane bonding is supported starting from Falcon Ridge (2nd generation) controllers. We also expose the current speed and number of lanes under each device except the host router following similar attribute naming than USB bus. Expose speed and number of lanes for both directions to allow possibility of asymmetric link in the future. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-11-01thunderbolt: Refactor add_switch() into two functionsMika Westerberg1-43/+67
Currently add_switch() takes a huge amount of parameters that makes it hard to maintain. Instead of passing all those parameters we can split the function into two parts (alloc and add) and fill the additional switch fields directly in the functions calling those. While there remove redundant error logging in case kmemdup() fails. No functional changes. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-11-01thunderbolt: Add helper macro to iterate over switch portsMika Westerberg5-65/+74
There are quite many places in the driver where we iterate over each port in the switch. To make it bit more convenient, add a macro that can be used to iterate over each port and convert existing call sites to use it. This is based on code by Lukas Wunner. No functional changes. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-11-01thunderbolt: Make tb_sw_write() take const parameterMika Westerberg1-1/+1
The function does not modify the argument in any way so make it const. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-11-01thunderbolt: Convert DP adapter register names to follow the USB4 specMika Westerberg3-44/+46
Now that USB4 spec has names for these DP adapter registers we can use them instead. This makes it easier to match certain register to the spec. No functional changes. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-11-01thunderbolt: Convert PCIe adapter register names to follow the USB4 specMika Westerberg2-6/+8
Now that USB4 spec has names for these PCIe adapter registers we can use them instead. This makes it easier to match certain register to the spec. No functional changes. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-11-01thunderbolt: Convert basic adapter register names to follow the USB4 specMika Westerberg3-21/+22
Now that USB4 spec has names for these basic registers we can use them instead. This makes it easier to match certain register to the spec. No functional changes. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-11-01thunderbolt: Log error if adding switch failsMika Westerberg1-5/+14
If we fail to add a switch for some reason log an error instead of keeping silent. This is useful for debugging. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-11-01thunderbolt: Log switch route string on config read/write timeoutMika Westerberg1-4/+4
This helps to point out which switch config read/write triggered the timeout. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-11-01thunderbolt: Introduce tb_switch_is_icm()Mika Westerberg3-4/+18
We currently differentiate between SW CM (Software Connection Manager, sometimes also called External Connection Manager) and ICM (Firmware based Connection Manager, Internal Connection Manager) by looking directly at the sw->config.enabled field which may be rather hard to understand for the casual reader. For this reason introduce a wrapper function with documentation that should make the intention more clear. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-11-01Merge branch 'thunderbolt/fixes' into thunderbolt/nextMika Westerberg2-18/+11
2019-10-09thunderbolt: Add 'generation' attribute for devicesChristian Kellner1-0/+10
The Thunderbolt standard went through several major iterations, here called generation. USB4, which will be based on Thunderbolt, will be generation 4. Let userspace know the generation of the controller in the devices in order to distinguish between Thunderbolt and USB4, so it can be shown in various user interfaces. Signed-off-by: Christian Kellner <christian@kellner.me> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-10-08thunderbolt: Drop unnecessary read when writing LC command in Ice LakeMika Westerberg1-1/+0
The read is not needed as we overwrite the returned value in the next line anyway so drop it. Fixes: 3cdb9446a117 ("thunderbolt: Add support for Intel Ice Lake") Reported-by: Nicholas Johnson <nicholas.johnson-opensource@outlook.com.au> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-10-08thunderbolt: Fix lockdep circular locking depedency warningMika Westerberg1-9/+0
When lockdep is enabled, plugging Thunderbolt dock on Dominik's laptop triggers following splat: ====================================================== WARNING: possible circular locking dependency detected 5.3.0-rc6+ #1 Tainted: G T ------------------------------------------------------ pool-/usr/lib/b/1258 is trying to acquire lock: 000000005ab0ad43 (pci_rescan_remove_lock){+.+.}, at: authorized_store+0xe8/0x210 but task is already holding lock: 00000000bfb796b5 (&tb->lock){+.+.}, at: authorized_store+0x7c/0x210 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&tb->lock){+.+.}: __mutex_lock+0xac/0x9a0 tb_domain_add+0x2d/0x130 nhi_probe+0x1dd/0x330 pci_device_probe+0xd2/0x150 really_probe+0xee/0x280 driver_probe_device+0x50/0xc0 bus_for_each_drv+0x84/0xd0 __device_attach+0xe4/0x150 pci_bus_add_device+0x4e/0x70 pci_bus_add_devices+0x2e/0x66 pci_bus_add_devices+0x59/0x66 pci_bus_add_devices+0x59/0x66 enable_slot+0x344/0x450 acpiphp_check_bridge.part.0+0x119/0x150 acpiphp_hotplug_notify+0xaa/0x140 acpi_device_hotplug+0xa2/0x3f0 acpi_hotplug_work_fn+0x1a/0x30 process_one_work+0x234/0x580 worker_thread+0x50/0x3b0 kthread+0x10a/0x140 ret_from_fork+0x3a/0x50 -> #0 (pci_rescan_remove_lock){+.+.}: __lock_acquire+0xe54/0x1ac0 lock_acquire+0xb8/0x1b0 __mutex_lock+0xac/0x9a0 authorized_store+0xe8/0x210 kernfs_fop_write+0x125/0x1b0 vfs_write+0xc2/0x1d0 ksys_write+0x6c/0xf0 do_syscall_64+0x50/0x180 entry_SYSCALL_64_after_hwframe+0x49/0xbe other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&tb->lock); lock(pci_rescan_remove_lock); lock(&tb->lock); lock(pci_rescan_remove_lock); *** DEADLOCK *** 5 locks held by pool-/usr/lib/b/1258: #0: 000000003df1a1ad (&f->f_pos_lock){+.+.}, at: __fdget_pos+0x4d/0x60 #1: 0000000095a40b02 (sb_writers#6){.+.+}, at: vfs_write+0x185/0x1d0 #2: 0000000017a7d714 (&of->mutex){+.+.}, at: kernfs_fop_write+0xf2/0x1b0 #3: 000000004f262981 (kn->count#208){.+.+}, at: kernfs_fop_write+0xfa/0x1b0 #4: 00000000bfb796b5 (&tb->lock){+.+.}, at: authorized_store+0x7c/0x210 stack backtrace: CPU: 0 PID: 1258 Comm: pool-/usr/lib/b Tainted: G T 5.3.0-rc6+ #1 On an system using ACPI hotplug the host router gets hotplugged first and then the firmware starts sending notifications about connected devices so the above scenario should not happen in reality. However, after taking a second look at commit a03e828915c0 ("thunderbolt: Serialize PCIe tunnel creation with PCI rescan") that introduced the locking, I don't think it is actually correct. It may have cured the symptom but probably the real root cause was somewhere closer to PCI stack and possibly is already fixed with recent kernels. I also tried to reproduce the original issue with the commit reverted but could not. So to keep lockdep happy and the code bit less complex drop calls to pci_lock_rescan_remove()/pci_unlock_rescan_remove() in tb_switch_set_authorized() effectively reverting a03e828915c0. Link: https://lkml.org/lkml/2019/8/30/513 Fixes: a03e828915c0 ("thunderbolt: Serialize PCIe tunnel creation with PCI rescan") Reported-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-10-08thunderbolt: Read DP IN adapter first two dwords in one goMika Westerberg1-8/+11
When we discover existing DP tunnels the code checks whether DP IN adapter port is enabled by calling tb_dp_port_is_enabled() before it continues the discovery process. On Light Ridge (gen 1) controller reading only the first dword of the DP IN config space causes subsequent access to the same DP IN port path config space to fail or return invalid data as can be seen in the below splat: thunderbolt 0000:07:00.0: CFG_ERROR(0:d): Invalid config space or offset Call Trace: tb_cfg_read+0xb9/0xd0 __tb_path_deactivate_hop+0x98/0x210 tb_path_activate+0x228/0x7d0 tb_tunnel_restart+0x95/0x200 tb_handle_hotplug+0x30e/0x630 process_one_work+0x1b4/0x340 worker_thread+0x44/0x3d0 kthread+0xeb/0x120 ? process_one_work+0x340/0x340 ? kthread_park+0xa0/0xa0 ret_from_fork+0x1f/0x30 If both DP In adapter config dwords are read in one go the issue does not reproduce. This is likely firmware bug but we can work it around by always reading the two dwords in one go. There should be no harm for other controllers either so can do it unconditionally. Link: https://lkml.org/lkml/2019/8/28/160 Reported-by: Brad Campbell <lists2009@fnarfbargle.com> Tested-by: Brad Campbell <lists2009@fnarfbargle.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-08-26thunderbolt: Add support for Intel Ice LakeMika Westerberg8-22/+524
The Thunderbolt controller is integrated into the Ice Lake CPU itself and requires special flows to power it on and off using force power bit in NHI VSEC registers. Runtime PM (RTD3) and Sx flows also differ from the discrete solutions. Now the firmware notifies the driver whether RTD3 entry or exit are possible. The driver is responsible of sending Go2Sx command through link controller mailbox when system enters Sx states (suspend-to-mem/disk). Rest of the ICM firwmare flows follow Titan Ridge. Signed-off-by: Raanan Avargil <raanan.avargil@intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Yehezkel Bernat <YehezkelShB@gmail.com> Tested-by: Mario Limonciello <mario.limonciello@dell.com>
2019-08-26thunderbolt: Expose active parts of NVM even if upgrade is not supportedMika Westerberg1-9/+19
Ice Lake Thunderbolt controller NVM firmware is part of the BIOS image which means it is not writable through the DMA port anymore. However, we can still read it so we can keep nvm_version and active parts of NVM. This way users still can find out the active NVM version and other potentially useful information directly from Linux. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Yehezkel Bernat <YehezkelShB@gmail.com> Tested-by: Mario Limonciello <mario.limonciello@dell.com>
2019-08-26thunderbolt: Hide switch attributes that are not setMika Westerberg1-1/+13
Thunderbolt host routers may not always contain DROM that includes device identification information. This is mostly needed for Ice Lake systems but some Falcon Ridge controllers on PCs also do not have DROM. In that case hide the identification attributes. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Yehezkel Bernat <YehezkelShB@gmail.com> Tested-by: Mario Limonciello <mario.limonciello@dell.com>
2019-08-26thunderbolt: Do not fail adding switch if some port is not implementedMika Westerberg3-9/+26
There are two ways to mark a port as unimplemented. Typical way is to return port type as TB_TYPE_INACTIVE when its config space is read. Alternatively if the port is not physically present (such as ports 10 and 11 in ICL) reading from port config space returns TB_CFG_ERROR_INVALID_CONFIG_SPACE instead. Currently the driver bails out from adding the switch if it receives any error during port inititialization which is wrong. Handle this properly and just leave the port as TB_TYPE_INACTIVE before continuing to the next port. This also allows us to get rid of special casing for Light Ridge port 5 in eeprom.c. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Yehezkel Bernat <YehezkelShB@gmail.com> Tested-by: Mario Limonciello <mario.limonciello@dell.com>
2019-08-26thunderbolt: Use 32-bit writes when writing ring producer/consumerMika Westerberg1-4/+18
The register access should be using 32-bit reads/writes according to the datasheet. With the previous generation hardware 16-bit writes have been working but starting with ICL this is not the case anymore so fix producer/consumer register update to use correct width register address. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Yehezkel Bernat <YehezkelShB@gmail.com> Tested-by: Mario Limonciello <mario.limonciello@dell.com>
2019-08-26thunderbolt: Move NVM upgrade support flag to struct icmMika Westerberg1-6/+12
This is depends on the controller and on the platform/CPU we are running. Move it to struct icm so we can set it per controller. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Yehezkel Bernat <YehezkelShB@gmail.com> Tested-by: Mario Limonciello <mario.limonciello@dell.com>
2019-08-26thunderbolt: Correct path indices for PCIe tunnelMika Westerberg1-2/+2
PCIe tunnel path indices got mixed up when we added support for tunnels between switches that are not adjacent. This did not affect the functionality as it is just an index but fix it now nevertheless to make the code easier to understand. Reported-by: Rajmohan Mani <rajmohan.mani@intel.com> Fixes: 8c7acaaf020f ("thunderbolt: Extend tunnel creation to more than 2 adjacent switches") Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Yehezkel Bernat <YehezkelShB@gmail.com>
2019-08-06thunderbolt: Show key using %*pE not %*pEpJ. Bruce Fields1-1/+1
%*pEp (without "h" or "o") is a no-op. This string could contain arbitrary (non-NULL) characters, so we do want escaping. Use %*pE like every other caller. Signed-off-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-08-06thunderbolt: Switch to use device_property_count_uXX()Andy Shevchenko1-1/+1
Use device_property_count_uXX() directly, that makes code neater. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Yehezkel Bernat <YehezkelShB@gmail.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-07-12Merge tag 'driver-core-5.3-rc1' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core and debugfs updates from Greg KH: "Here is the "big" driver core and debugfs changes for 5.3-rc1 It's a lot of different patches, all across the tree due to some api changes and lots of debugfs cleanups. Other than the debugfs cleanups, in this set of changes we have: - bus iteration function cleanups - scripts/get_abi.pl tool to display and parse Documentation/ABI entries in a simple way - cleanups to Documenatation/ABI/ entries to make them parse easier due to typos and other minor things - default_attrs use for some ktype users - driver model documentation file conversions to .rst - compressed firmware file loading - deferred probe fixes All of these have been in linux-next for a while, with a bunch of merge issues that Stephen has been patient with me for" * tag 'driver-core-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (102 commits) debugfs: make error message a bit more verbose orangefs: fix build warning from debugfs cleanup patch ubifs: fix build warning after debugfs cleanup patch driver: core: Allow subsystems to continue deferring probe drivers: base: cacheinfo: Ensure cpu hotplug work is done before Intel RDT arch_topology: Remove error messages on out-of-memory conditions lib: notifier-error-inject: no need to check return value of debugfs_create functions swiotlb: no need to check return value of debugfs_create functions ceph: no need to check return value of debugfs_create functions sunrpc: no need to check return value of debugfs_create functions ubifs: no need to check return value of debugfs_create functions orangefs: no need to check return value of debugfs_create functions nfsd: no need to check return value of debugfs_create functions lib: 842: no need to check return value of debugfs_create functions debugfs: provide pr_fmt() macro debugfs: log errors when something goes wrong drivers: s390/cio: Fix compilation warning about const qualifiers drivers: Add generic helper to match by of_node driver_find_device: Unify the match function with class_find_device() bus_find_device: Unify the match callback with class_find_device ...
2019-06-24bus_find_device: Unify the match callback with class_find_deviceSuzuki K Poulose1-2/+2
There is an arbitrary difference between the prototypes of bus_find_device() and class_find_device() preventing their callers from passing the same pair of data and match() arguments to both of them, which is the const qualifier used in the prototype of class_find_device(). If that qualifier is also used in the bus_find_device() prototype, it will be possible to pass the same match() callback function to both bus_find_device() and class_find_device(), which will allow some optimizations to be made in order to avoid code duplication going forward. Also with that, constify the "data" parameter as it is passed as a const to the match function. For this reason, change the prototype of bus_find_device() to match the prototype of class_find_device() and adjust its callers to use the const qualifier in accordance with the new prototype of it. Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Andreas Noever <andreas.noever@gmail.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Corey Minyard <minyard@acm.org> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: David Kershner <david.kershner@unisys.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: David Airlie <airlied@linux.ie> Cc: Felipe Balbi <balbi@kernel.org> Cc: Frank Rowand <frowand.list@gmail.com> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Harald Freudenberger <freude@linux.ibm.com> Cc: Hartmut Knaack <knaack.h@gmx.de> Cc: Heiko Stuebner <heiko@sntech.de> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jonathan Cameron <jic23@kernel.org> Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: Len Brown <lenb@kernel.org> Cc: Mark Brown <broonie@kernel.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michael Jamet <michael.jamet@intel.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Peter Oberparleiter <oberpar@linux.ibm.com> Cc: Sebastian Ott <sebott@linux.ibm.com> Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Cc: Yehezkel Bernat <YehezkelShB@gmail.com> Cc: rafael@kernel.org Acked-by: Corey Minyard <minyard@acm.org> Acked-by: David Kershner <david.kershner@unisys.com> Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Acked-by: Wolfram Sang <wsa@the-dreams.de> # for the I2C parts Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-14thunderbolt: Implement CIO reset correctly for Titan RidgeMika Westerberg1-60/+74
When starting ICM firmware on Apple systems we need to perform CIO reset as part of the flow. However, it turns out that the reset register has changed to another location in Titan Ridge. Fix this by introducing ->cio_reset() callback with corresponding implementations for Alpine and Titan Ridge. Fixes: c4630d6ae6e3 ("thunderbolt: Start firmware on Titan Ridge Apple systems") Reported-by: Peter Bowen <pzb@amazon.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-06-12thunderbolt: Make sure device runtime resume completes before taking domain lockMika Westerberg3-13/+93
When a device is authorized from userspace by writing to authorized attribute we first take the domain lock and then runtime resume the device in question. There are two issues with this. First is that the device connected notifications are blocked during this time which means we get them only after the authorization operation is complete. Because of this the authorization needed flag from the firmware notification is not reflecting the real authorization status anymore. So what happens is that the "authorized" keeps returning 0 even if the device was already authorized properly. Second issue is that each time the controller is runtime resumed the connection_id field of device connected notification may be different than in the previous resume. We need to use the latest connection_id otherwise the firmware rejects the authorization command. Fix these by moving runtime resume operations to happen before the domain lock is taken, and waiting for the updated device connected notification from the firmware before we allow runtime resume of a device to complete. While there add missing locking to tb_switch_nvm_read(). Fixes: 09f11b6c99fe ("thunderbolt: Take domain lock in switch sysfs attribute callbacks") Reported-by: Pengfei Xu <pengfei.xu@intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner2-0/+2
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21treewide: Add SPDX license identifier for more missed filesThomas Gleixner1-0/+1
Add SPDX license identifiers to all files which: - Have no license information of any form - Have MODULE_LICENCE("GPL*") inside which was used in the initial scan/conversion to ignore the file These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-07Merge tag 'char-misc-5.2-rc1-part2' of ↵Linus Torvalds18-669/+2754
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc update part 2 from Greg KH: "Here is the "real" big set of char/misc driver patches for 5.2-rc1 Loads of different driver subsystem stuff in here, all over the places: - thunderbolt driver updates - habanalabs driver updates - nvmem driver updates - extcon driver updates - intel_th driver updates - mei driver updates - coresight driver updates - soundwire driver cleanups and updates - fastrpc driver updates - other minor driver updates - chardev minor fixups Feels like this tree is getting to be a dumping ground of "small driver subsystems" these days. Which is fine with me, if it makes things easier for those subsystem maintainers. All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-5.2-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (255 commits) intel_th: msu: Add current window tracking intel_th: msu: Add a sysfs attribute to trigger window switch intel_th: msu: Correct the block wrap detection intel_th: Add switch triggering support intel_th: gth: Factor out trace start/stop intel_th: msu: Factor out pipeline draining intel_th: msu: Switch over to scatterlist intel_th: msu: Replace open-coded list_{first,last,next}_entry variants intel_th: Only report useful IRQs to subdevices intel_th: msu: Start handling IRQs intel_th: pci: Use MSI interrupt signalling intel_th: Communicate IRQ via resource intel_th: Add "rtit" source device intel_th: Skip subdevices if their MMIO is missing intel_th: Rework resource passing between glue layers and core intel_th: SPDX-ify the documentation intel_th: msu: Fix single mode with IOMMU coresight: funnel: Support static funnel dt-bindings: arm: coresight: Unify funnel DT binding coresight: replicator: Add new device id for static replicator ...
2019-04-25thunderbolt: Make priority unsigned in struct tb_pathNathan Chancellor1-1/+1
Clang warns: drivers/thunderbolt/tunnel.c:504:17: warning: implicit truncation from 'int' to bit-field changes value from 5 to -3 [-Wbitfield-constant-conversion] path->priority = 5; ^ ~ 1 warning generated. The priority member in struct tb_path is only ever assigned a positive number: $ rg -n priority drivers/thunderbolt/path.c drivers/thunderbolt/tunnel.c:99: path->priority = 3; drivers/thunderbolt/tunnel.c:308: path->priority = 2; drivers/thunderbolt/tunnel.c:323: path->priority = 1; drivers/thunderbolt/tunnel.c:504: path->priority = 5; Furthermore, that value is only assigned to an unsigned integer in tb_path_activate (the priority member in struct tb_regs_hop). Fixes: 44242d6c9703 ("thunderbolt: Add support for DMA tunnels") Link: https://github.com/ClangBuiltLinux/linux/issues/454 Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-04-25crypto: shash - remove shash_desc::flagsEric Biggers1-1/+0
The flags field in 'struct shash_desc' never actually does anything. The only ostensibly supported flag is CRYPTO_TFM_REQ_MAY_SLEEP. However, no shash algorithm ever sleeps, making this flag a no-op. With this being the case, inevitably some users who can't sleep wrongly pass MAY_SLEEP. These would all need to be fixed if any shash algorithm actually started sleeping. For example, the shash_ahash_*() functions, which wrap a shash algorithm with the ahash API, pass through MAY_SLEEP from the ahash API to the shash API. However, the shash functions are called under kmap_atomic(), so actually they're assumed to never sleep. Even if it turns out that some users do need preemption points while hashing large buffers, we could easily provide a helper function crypto_shash_update_large() which divides the data into smaller chunks and calls crypto_shash_update() and cond_resched() for each chunk. It's not necessary to have a flag in 'struct shash_desc', nor is it necessary to make individual shash algorithms aware of this at all. Therefore, remove shash_desc::flags, and document that the crypto_shash_*() functions can be called from any context. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-18 23:16:36 +0000