summaryrefslogtreecommitdiff
path: root/drivers/rpmsg
AgeCommit message (Collapse)AuthorFilesLines
2020-08-23treewide: Use fallthrough pseudo-keywordGustavo A. R. Silva1-2/+2
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2020-07-21rpmsg: virtio: add endianness conversionsGuennadi Liakhovetski1-29/+34
According to the VirtIO 1.0 spec data, sent over virtual queues must be in little-endian format. Update the RPMsg VirtIO implementation to enforce that but let legacy configurations continue use native endianness. Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Tested-by: Arnaud Pouliquen <arnaud.pouliquen@st.com> Link: https://lore.kernel.org/r/20200721085638.GA3815@ubuntu Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-06-08Merge tag 'rproc-v5.8' of ↵Linus Torvalds3-4/+171
git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc Pull remoteproc updates from Bjorn Andersson: "This introduces device managed versions of functions used to register remoteproc devices, add support for remoteproc driver specific resource control, enables remoteproc drivers to specify ELF class and machine for coredumps. It integrates pm_runtime in the core for keeping resources active while the remote is booted and holds a wake source while recoverying a remote processor after a firmware crash. It refactors the remoteproc device's allocation path to simplify the logic, fix a few cleanup bugs and to not clone const strings onto the heap. Debugfs code is simplifies using the DEFINE_SHOW_ATTRIBUTE and a zero-length array is replaced with flexible-array. A new remoteproc driver for the JZ47xx VPU is introduced, the Qualcomm SM8250 gains support for audio, compute and sensor remoteprocs and the Qualcomm SC7180 modem support is cleaned up and improved. The Qualcomm glink subsystem-restart driver is merged into the main glink driver, the Qualcomm sysmon driver is extended to properly notify remote processors about all other remote processors' state transitions" * tag 'rproc-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc: (43 commits) remoteproc: Fix an error code in devm_rproc_alloc() MAINTAINERS: Add myself as reviewer for Ingenic rproc driver remoteproc: ingenic: Added remoteproc driver remoteproc: Add support for runtime PM dt-bindings: Document JZ47xx VPU auxiliary processor remoteproc: wcss: Fix arguments passed to qcom_add_glink_subdev() remoteproc: Fix and restore the parenting hierarchy for vdev remoteproc: Fall back to using parent memory pool if no dedicated available remoteproc: Replace zero-length array with flexible-array remoteproc: wcss: add support for rpmsg communication remoteproc: core: Prevent system suspend during remoteproc recovery remoteproc: qcom_q6v5_mss: Remove unused q6v5_da_to_va function remoteproc: qcom_q6v5_mss: map/unmap mpss segments before/after use remoteproc: qcom_q6v5_mss: Drop accesses to MPSS PERPH register space dt-bindings: remoteproc: qcom: Replace halt-nav with spare-regs remoteproc: qcom: pas: Add SM8250 PAS remoteprocs dt-bindings: remoteproc: qcom: pas: Add SM8250 remoteprocs remoteproc: qcom_q6v5_mss: Extract mba/mpss from memory-region dt-bindings: remoteproc: qcom: Use memory-region to reference memory remoteproc: qcom: pas: Add SC7180 Modem support ...
2020-06-08Merge tag 'rpmsg-v5.8' of ↵Linus Torvalds2-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc Pull rpmsg updates from Bjorn Andersson: "This replaces a zero-length array with flexible-array and fixes a typo in a comment in the rpmsg core" * tag 'rpmsg-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc: rpmsg: Replace zero-length array with flexible-array rpmsg: fix a comment typo for rpmsg_device_match()
2020-05-12rpmsg: Replace zero-length array with flexible-arrayGustavo A. R. Silva1-1/+1
The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertently introduced[3] to the codebase from now on. Also, notice that, dynamic memory allocations won't be affected by this change: "Flexible array members have incomplete type, and so the sizeof operator may not be applied. As a quirk of the original implementation of zero-length arrays, sizeof evaluates to zero."[1] sizeof(flexible-array-member) triggers a warning because flexible array members have incomplete type[1]. There are some instances of code in which the sizeof operator is being incorrectly/erroneously applied to zero-length arrays and the result is zero. Such instances may be hiding some bugs. So, this work (flexible-array member conversions) will also help to get completely rid of those sorts of issues. This issue was found with the help of Coccinelle. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour") Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Link: https://lore.kernel.org/r/20200507191948.GA16053@embeddedor Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-05-07rpmsg: glink: Integrate glink_ssr in qcom_glinkBjorn Andersson3-4/+171
In all but the very special case of a system with _only_ glink_rpm, GLINK is dependent on glink_ssr, so move it to rpmsg and combine it with qcom_glink_native in the new qcom_glink kernel module. Acked-by: Chris Lew <clew@codeaurora.org> Acked-by: Rishabh Bhatnagar <rishabhb@codeaurora.org> Link: https://lore.kernel.org/r/20200423003736.2027371-4-bjorn.andersson@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-04-17rpmsg: pull in slab.hMichael S. Tsirkin1-0/+1
In preparation to virtio header changes, include slab.h directly as this module is using it. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-04-16rpmsg: fix a comment typo for rpmsg_device_match()Wang Wenhu1-1/+1
Should be 'a' rather than 'an'. Signed-off-by: WANG Wenhu <wenhu.wang@vivo.com> Link: https://lore.kernel.org/r/20200313165049.62907-1-wenhu.wang@vivo.com Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-01-20rpmsg: add rpmsg support for mt8183 SCP.Pi-Hsun Shih3-0/+424
Add a simple rpmsg support for mt8183 SCP, that use IPI / IPC directly. Signed-off-by: Pi-Hsun Shih <pihsun@chromium.org> Link: https://lore.kernel.org/r/20191112110330.179649-4-pihsun@chromium.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-12-01Merge tag 'rpmsg-v5.5' of ↵Linus Torvalds4-20/+49
git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc Pull rpmsg updates from Bjorn Andersson: "This contains a number of bug fixes to the GLINK transport driver, an off-by-one in the GLINK smem driver and a memory leak fix in the rpmsg char driver" * tag 'rpmsg-v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc: rpmsg: Fix Kconfig indentation rpmsg: char: Simplify 'rpmsg_eptdev_release()' rpmsg: glink: Free pending deferred work on remove rpmsg: glink: Don't send pending rx_done during remove rpmsg: glink: Fix rpmsg_register_device err handling rpmsg: glink: Put an extra reference during cleanup rpmsg: glink: Fix use after free in open_ack TIMEOUT case rpmsg: glink: Fix reuse intents memory leak issue rpmsg: glink: Set tail pointer to 0 at end of FIFO rpmsg: char: release allocated memory
2019-11-21rpmsg: Fix Kconfig indentationKrzysztof Kozlowski1-1/+1
Adjust indentation from spaces to tab (+optional two spaces) as in coding style with command like: $ sed -e 's/^ /\t/' -i */Kconfig Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20191120133945.13938-1-krzk@kernel.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-11-08rpmsg: char: Simplify 'rpmsg_eptdev_release()'Christophe JAILLET1-5/+1
Use 'skb_queue_purge()' instead of re-implementing it. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-10-23compat_ioctl: move more drivers to compat_ptr_ioctlArnd Bergmann1-2/+2
The .ioctl and .compat_ioctl file operations have the same prototype so they can both point to the same function, which works great almost all the time when all the commands are compatible. One exception is the s390 architecture, where a compat pointer is only 31 bit wide, and converting it into a 64-bit pointer requires calling compat_ptr(). Most drivers here will never run in s390, but since we now have a generic helper for it, it's easy enough to use it consistently. I double-checked all these drivers to ensure that all ioctl arguments are used as pointers or are ignored, but are not interpreted as integer values. Acked-by: Jason Gunthorpe <jgg@mellanox.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: David Sterba <dsterba@suse.com> Acked-by: Darren Hart (VMware) <dvhart@infradead.org> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Acked-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-10-17rpmsg: glink: Free pending deferred work on removeBjorn Andersson1-1/+13
By just cancelling the deferred rx worker during GLINK instance teardown any pending deferred commands are leaked, so free them. Fixes: b4f8e52b89f6 ("rpmsg: Introduce Qualcomm RPM glink driver") Cc: stable@vger.kernel.org Acked-by: Chris Lew <clew@codeaurora.org> Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-10-17rpmsg: glink: Don't send pending rx_done during removeBjorn Andersson1-3/+12
Attempting to transmit rx_done messages after the GLINK instance is being torn down will cause use after free and memory leaks. So cancel the intent_work and free up the pending intents. With this there are no concurrent accessors of the channel left during qcom_glink_native_remove() and there is therefor no need to hold the spinlock during this operation - which would prohibit the use of cancel_work_sync() in the release function. So remove this. Fixes: 1d2ea36eead9 ("rpmsg: glink: Add rx done command") Cc: stable@vger.kernel.org Acked-by: Chris Lew <clew@codeaurora.org> Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-10-16rpmsg: glink: Fix rpmsg_register_device err handlingChris Lew1-3/+1
The device release function is set before registering with rpmsg. If rpmsg registration fails, the framework will call device_put(), which invokes the release function. The channel create logic does not need to free rpdev if rpmsg_register_device() fails and release is called. Fixes: b4f8e52b89f6 ("rpmsg: Introduce Qualcomm RPM glink driver") Cc: stable@vger.kernel.org Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Chris Lew <clew@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-10-16rpmsg: glink: Put an extra reference during cleanupChris Lew1-0/+4
In a remote processor crash scenario, there is no guarantee the remote processor sent close requests before it went into a bad state. Remove the reference that is normally handled by the close command in the so channel resources can be released. Fixes: b4f8e52b89f6 ("rpmsg: Introduce Qualcomm RPM glink driver") Cc: stable@vger.kernel.org Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Chris Lew <clew@codeaurora.org> Reported-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-10-16rpmsg: glink: Fix use after free in open_ack TIMEOUT caseArun Kumar Neelakantam1-4/+3
Extra channel reference put when remote sending OPEN_ACK after timeout causes use-after-free while handling next remote CLOSE command. Remove extra reference put in timeout case to avoid use-after-free. Fixes: b4f8e52b89f6 ("rpmsg: Introduce Qualcomm RPM glink driver") Cc: stable@vger.kernel.org Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Arun Kumar Neelakantam <aneela@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-10-16rpmsg: glink: Fix reuse intents memory leak issueArun Kumar Neelakantam1-0/+9
Memory allocated for re-usable intents are not freed during channel cleanup which causes memory leak in system. Check and free all re-usable memory to avoid memory leak. Fixes: 933b45da5d1d ("rpmsg: glink: Add support for TX intents") Cc: stable@vger.kernel.org Acked-By: Chris Lew <clew@codeaurora.org> Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Arun Kumar Neelakantam <aneela@codeaurora.org> Reported-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-10-11rpmsg: glink: Set tail pointer to 0 at end of FIFOChris Lew1-1/+1
When wrapping around the FIFO, the remote expects the tail pointer to be reset to 0 on the edge case where the tail equals the FIFO length. Fixes: caf989c350e8 ("rpmsg: glink: Introduce glink smem based transport") Cc: stable@vger.kernel.org Signed-off-by: Chris Lew <clew@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-10-04rpmsg: char: release allocated memoryNavid Emamdoost1-2/+4
In rpmsg_eptdev_write_iter, if copy_from_iter_full fails the allocated buffer needs to be released. Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-09-17rpmsg: glink-smem: Name the edge based on parent remoteprocBjorn Andersson1-1/+1
Naming the glink edge device on the parent of_node short name causes collisions when multiple remoteproc instances with only different unit address are described on the platform_bus in DeviceTree. Base the edge's name on the parent remoteproc's name instead, to ensure that it's unique. Reviewed-by: Niklas Cassel <niklas.cassel@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-08-29rpmsg: glink: Use struct_size() helperGustavo A. R. Silva1-1/+1
One of the more common cases of allocation size calculations is finding the size of a structure that has a zero-sized array at the end, along with memory for some number of elements for that array. For example: struct { ... struct intent_pair intents[]; } __packed * msg; Make use of the struct_size() helper instead of an open-coded version in order to avoid any potential type mistakes. So, replace the following form: sizeof(*msg) + sizeof(struct intent_pair) * count with: struct_size(msg, intents, count) This code was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-08-27rpmsg: virtio_rpmsg_bus: replace "%p" with "%pK"Suman Anna1-1/+1
The virtio_rpmsg_bus driver uses the "%p" format-specifier for printing the vring buffer address. This prints only a hashed pointer even for previliged users. Use "%pK" instead so that the address can be printed during debug using kptr_restrict sysctl. Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-08-26rpmsg: core: fix commentsPierre-Louis Bossart2-6/+7
Minor typos, grammar and copy/paste issues. Fix for consistency. No functional or semantic change. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-05-21rpmsg: core: Make remove handler for rpmsg driver optional.Pi-Hsun Shih1-1/+2
Most other bus (for example, SPI, i2c) have the remove handler for driver optional. Make remove handler for rpmsg driver optional too. Signed-off-by: Pi-Hsun Shih <pihsun@chromium.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-02-20rpmsg: virtio: change header file sort styleLoic Pallardy1-9/+9
Make header files alphabetical order. Signed-off-by: Loic Pallardy <loic.pallardy@st.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-02-20rpmsg: virtio: allocate buffer from parentLoic Pallardy1-3/+3
Remoteproc is now capable to create one specific sub-device per virtio link to associate a dedicated memory pool. This implies to change device used by virtio_rpmsg for buffer allocation from grand-parent to parent. Signed-off-by: Loic Pallardy <loic.pallardy@st.com> Reviewed-by: Anup Patel <anup@brainfault.org> Tested-by: Anup Patel <anup@brainfault.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-10-03rpmsg: glink: smem: Support rx peak for size less than 4 bytesArun Kumar Neelakantam1-8/+4
The current rx peak function fails to read the data if size is less than 4bytes. Use memcpy_fromio to support data reads of size less than 4 bytes. Cc: stable@vger.kernel.org Fixes: f0beb4ba9b18 ("rpmsg: glink: Remove chunk size word align warning") Signed-off-by: Arun Kumar Neelakantam <aneela@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-09-27rpmsg: smd: fix memory leak on channel createColin Ian King1-2/+5
Currently a failed allocation of channel->name leads to an immediate return without freeing channel. Fix this by setting ret to -ENOMEM and jumping to an exit path that kfree's channel. Detected by CoverityScan, CID#1473692 ("Resource Leak") Fixes: 53e2822e56c7 ("rpmsg: Introduce Qualcomm SMD backend") Cc: stable@vger.kernel.org Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-09-01rpmsg: glink: Remove chunk size word align warningChris Lew1-3/+0
It is possible for the chunk sizes coming from the non RPM remote procs to not be word aligned. Remove the alignment warning and continue to read from the FIFO so execution is not stalled. Signed-off-by: Chris Lew <clew@codeaurora.org> Signed-off-by: Arun Kumar Neelakantam <aneela@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-08-27rpmsg: Convert to using %pOFn instead of device_node.nameRob Herring2-2/+2
In preparation to remove the node name pointer from struct device_node, convert printf users to use the %pOFn format specifier. Cc: Ohad Ben-Cohen <ohad@wizery.com> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: linux-remoteproc@vger.kernel.org Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-08-27rpmsg: char: Migrate to iter versions of read and writeBjorn Andersson1-11/+16
In order to be able to use the aio interface for writing to a rpmsg_char the write_iter function must be implemented, so migrate to iter version for read and write functions. Regular read and write uses the iter methods if present and is as such unaffected. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-07-30rpmsg: Add compat ioctl for rpmsg char driverArun Kumar Neelakantam1-0/+2
Add compat ioctl callback to support 32bit user space applications. Signed-off-by: Arun Kumar Neelakantam <aneela@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-07-30rpmsg: glink: Store edge name for glink deviceChris Lew1-0/+6
Channels may need to identify the edge their channel was probed for. Store the edge name by reading the label property from device tree or default to the node name. Signed-off-by: Chris Lew <clew@codeaurora.org> Signed-off-by: Arun Kumar Neelakantam <aneela@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-07-30rpmsg: core: add support to power domains for devicesSrinivas Kandagatla1-0/+7
Some of the rpmsg devices need to switch on power domains to communicate with remote processor. For example on Qualcomm DB820c platform LPASS power domain needs to switched on for any kind of audio services. This patch adds the missing power domain support in rpmsg core. Without this patch attempting to play audio via QDSP on DB820c would reboot the system. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-07-30rpmsg: smd: fix kerneldoc warningsSrinivas Kandagatla1-1/+8
This patch fixes below kerneldoc warnings qcom_smd.c:141: warning: Function parameter or member 'dev' not described in 'qcom_smd_edge' qcom_smd.c:141: warning: Function parameter or member 'name' not described in 'qcom_smd_edge' qcom_smd.c:141: warning: Function parameter or member 'new_channel_event' not described in 'qcom_smd_edge' qcom_smd.c:222: warning: Function parameter or member 'qsept' not described in 'qcom_smd_channel' qcom_smd.c:222: warning: Function parameter or member 'registered' not described in 'qcom_smd_channel' qcom_smd.c:222: warning: Function parameter or member 'state_change_event' not described in 'qcom_smd_channel' qcom_smd.c:222: warning: Function parameter or member 'drvdata' not described in 'qcom_smd_channel' qcom_smd.c:737: warning: Function parameter or member 'wait' not described in '__qcom_smd_send' Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-07-30rpmsg: glink: Fix various kerneldoc warnings.Srinivas Kandagatla1-16/+19
Fix below kerneldoc warnings while building with W=1 qcom_glink_native.c:53: warning: Function parameter or member 'data' not described in 'glink_defer_cmd' qcom_glink_native.c:75: warning: Function parameter or member 'data' not described in 'glink_core_rx_intent' qcom_glink_native.c:75: warning: Function parameter or member 'id' not described in 'glink_core_rx_intent' qcom_glink_native.c:75: warning: Function parameter or member 'size' not described in 'glink_core_rx_intent' qcom_glink_native.c:75: warning: Function parameter or member 'reuse' not described in 'glink_core_rx_intent' qcom_glink_native.c:75: warning: Function parameter or member 'in_use' not described in 'glink_core_rx_intent' qcom_glink_native.c:75: warning: Function parameter or member 'offset' not described in 'glink_core_rx_intent' qcom_glink_native.c:75: warning: Function parameter or member 'node' not described in 'glink_core_rx_intent' qcom_glink_native.c:116: warning: Function parameter or member 'features' not described in 'qcom_glink' qcom_glink_native.c:116: warning: Function parameter or member 'intentless' not described in 'qcom_glink' qcom_glink_native.c:524: warning: Function parameter or member 'version' not described in 'qcom_glink_receive_version' qcom_glink_native.c:524: warning: Function parameter or member 'features' not described in 'qcom_glink_receive_version' qcom_glink_native.c:524: warning: Excess function parameter 'r_version' description in 'qcom_glink_receive_version' qcom_glink_native.c:524: warning: Excess function parameter 'r_features' description in 'qcom_glink_receive_version' qcom_glink_native.c:551: warning: Function parameter or member 'version' not described in 'qcom_glink_receive_version_ack' qcom_glink_native.c:551: warning: Function parameter or member 'features' not described in 'qcom_glink_receive_version_ack' qcom_glink_native.c:551: warning: Excess function parameter 'r_version' description in 'qcom_glink_receive_version_ack' qcom_glink_native.c:551: warning: Excess function parameter 'r_features' description in 'qcom_glink_receive_version_ack' qcom_glink_native.c:570: warning: bad line: wire format and transmit qcom_glink_native.c:604: warning: Function parameter or member 'intent' not described in 'qcom_glink_advertise_intent' qcom_glink_native.c:604: warning: Excess function parameter 'size' description in 'qcom_glink_advertise_intent' qcom_glink_native.c:710: warning: Function parameter or member 'glink' not described in 'qcom_glink_handle_intent_req' qcom_glink_native.c:710: warning: Function parameter or member 'cid' not described in 'qcom_glink_handle_intent_req' qcom_glink_native.c:710: warning: Function parameter or member 'size' not described in 'qcom_glink_handle_intent_req' Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-07-30rpmsg: glink: correctly annotate intent membersSrinivas Kandagatla1-5/+5
As intent structure members are not correctly annotated, leading to below warnings qcom_glink_native.c:614:16: warning: incorrect type in assignment (different base types) qcom_glink_native.c:614:16: expected unsigned short [unsigned] [usertype] id qcom_glink_native.c:614:16: got restricted __le16 [usertype] <noident> qcom_glink_native.c:615:18: warning: incorrect type in assignment (different base types) qcom_glink_native.c:615:18: expected unsigned short [unsigned] [usertype] lcid qcom_glink_native.c:615:18: got restricted __le16 [usertype] <noident> qcom_glink_native.c:616:19: warning: incorrect type in assignment (different base types) qcom_glink_native.c:616:19: expected unsigned int [unsigned] [usertype] count qcom_glink_native.c:616:19: got restricted __le32 [usertype] <noident> qcom_glink_native.c:617:18: warning: incorrect type in assignment (different base types) qcom_glink_native.c:617:18: expected unsigned int [unsigned] [usertype] size qcom_glink_native.c:617:18: got restricted __le32 [usertype] <noident> qcom_glink_native.c:618:18: warning: incorrect type in assignment (different base types) qcom_glink_native.c:618:18: expected unsigned int [unsigned] [usertype] liid qcom_glink_native.c:618:18: got restricted __le32 [usertype] <noident> Fix this by correctly annotating them. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-07-01rpmsg: smd: Add missing include of sizes.hNiklas Cassel1-0/+1
Add missing include of sizes.h. drivers/rpmsg/qcom_smd.c: In function ‘qcom_smd_channel_open’: drivers/rpmsg/qcom_smd.c:809:36: error: ‘SZ_4K’ undeclared (first use in this function) bb_size = min(channel->fifo_size, SZ_4K); ^~~~~ Signed-off-by: Niklas Cassel <niklas.cassel@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-06-04rpmsg: smd: do not use mananged resources for endpoints and channelsSrinivas Kandagatla1-9/+9
All the managed resources would be freed by the time release function is invoked. Handling such memory in qcom_smd_edge_release() would do bad things. Found this issue while testing Audio usecase where the dsp is started up and shutdown in a loop. This patch fixes this issue by using simple kzalloc for allocating channel->name and channel which is then freed in qcom_smd_edge_release(). Without this patch restarting a remoteproc would crash the system. Fixes: 53e2822e56c7 ("rpmsg: Introduce Qualcomm SMD backend") Cc: <stable@vger.kernel.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-06-03rpmsg: char: Switch to SPDX license identifierSuman Anna1-9/+1
Use the appropriate SPDX license identifier in the rpmsg char driver source file and drop the previous boilerplate license text. The uapi header file already had the SPDX license identifier added as part of a mass update but the license text removal was deferred for later, and this patch drops the same. Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-06-03rpmsg: glink: Switch to SPDX license identifierSuman Anna4-36/+4
Use the appropriate SPDX license identifier in various rpmsg glink driver source files and drop the previous boilerplate license text. Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-06-03rpmsg: smd: Switch to SPDX license identifierSuman Anna1-9/+1
Use the appropriate SPDX license identifier in the rpmsg SMD backend driver source file and drop the previous boilerplate license text. Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-06-03rpmsg: virtio_rpmsg_bus: Switch to SPDX license identifierSuman Anna1-9/+1
Use the appropriate SPDX license identifier in the virtio rpmsg bus driver source file and drop the previous boilerplate license text. Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-06-03rpmsg: Switch to SPDX license identifierSuman Anna3-18/+4
Use the appropriate SPDX license identifier in the rpmsg core source files and drop the previous boilerplate license text. Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-05-09Merge tag 'v4.17-rc4' into rpmsg-nextBjorn Andersson1-0/+2
Pick up fixes from rproc-v4.17-1 Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-04-25rpmsg: qcom_smd: Access APCS through mailbox frameworkBjorn Andersson2-19/+50
Attempt to acquire the APCS IPC through the mailbox framework and fall back to the old syscon based approach, to allow us to move away from using the syscon. Reviewed-by: Arun Kumar Neelakantam <aneela@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-04-25rpmsg: Add driver_override device attribute for rpmsg_deviceAnup Patel1-0/+39
This patch adds "driver_override" device attribute for rpmsg_device which will allow users to explicitly specify the rpmsg_driver to be used via sysfs entry. The "driver_override" device attribute implemented here is very similar to "driver_override" implemented for platform, pci, and amba bus types. One important use-case of "driver_override" device attribute is to force use of rpmsg_chrdev driver for certain rpmsg_device instances. Signed-off-by: Anup Patel <anup@brainfault.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-04-25rpmsg: added MODULE_ALIAS for rpmsg_charRamon Fried1-0/+2
Added "rpmsg:rpmsg_chrdev" MODULE_ALIAS to autoload rpmg_chrdev module automatically. Signed-off-by: Ramon Fried <rfried@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-22 22:02:30 +0000