summaryrefslogtreecommitdiff
path: root/drivers/mtd/nand
AgeCommit message (Collapse)AuthorFilesLines
2014-11-02Merge tag 'for-linus-20141102' of git://git.infradead.org/linux-mtdLinus Torvalds1-1/+1
Pull MTD fixes from Brian Norris: "Three main MTD fixes for 3.18: - A regression from 3.16 which was noticed in 3.17. With the restructuring of the m25p80.c driver and the SPI NOR library framework, we omitted proper listing of the SPI device IDs. This means m25p80.c wouldn't auto-load (modprobe) properly when built as a module. For now, we duplicate the device IDs into both modules. - The OMAP / ELM modules were depending on an implicit link ordering. Use deferred probing so that the new link order (in 3.18-rc) can still allow for successful probing. - Fix suspend/resume support for LH28F640BF NOR flash" * tag 'for-linus-20141102' of git://git.infradead.org/linux-mtd: mtd: cfi_cmdset_0001.c: fix resume for LH28F640BF chips mtd: omap: fix mtd devices not showing up mtd: m25p80,spi-nor: Fix module aliases for m25p80 mtd: spi-nor: make spi_nor_scan() take a chip type name, not spi_device_id mtd: m25p80: get rid of spi_get_device_id
2014-10-29mtd: omap: fix mtd devices not showing upFrans Klaver1-1/+1
Since commit 6d178ef2fd5e ("mtd: nand: Move ELM driver and rename as omap_elm"), I don't have any mtd devices present on my am335x. This changes the link order of the omap_elm and omap2 objects, causing them to probe in the wrong order. To fix this, make elm_config defer probing until the omap_elm driver is actually loaded. Signed-off-by: Frans Klaver <frans.klaver@xsens.com> Acked-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-10-18Merge branch 'for-linus' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds2-2/+2
Pull slave-dmaengine updates from Vinod Koul: "For dmaengine contributions we have: - designware cleanup by Andy - my series moving device_control users to dmanegine_xxx APIs for later removal of device_control API - minor fixes spread over drivers mainly mv_xor, pl330, mmp, imx-sdma etc" * 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma: (60 commits) serial: atmel: add missing dmaengine header dmaengine: remove FSLDMA_EXTERNAL_START dmaengine: freescale: remove FSLDMA_EXTERNAL_START control method carma-fpga: move to fsl_dma_external_start() carma-fpga: use dmaengine_xxx() API dmaengine: freescale: add and export fsl_dma_external_start() dmaengine: add dmaengine_prep_dma_sg() helper video: mx3fb: use dmaengine_terminate_all() API serial: sh-sci: use dmaengine_terminate_all() API net: ks8842: use dmaengine_terminate_all() API mtd: sh_flctl: use dmaengine_terminate_all() API mtd: fsmc_nand: use dmaengine_terminate_all() API V4L2: mx3_camer: use dmaengine_pause() API dmaengine: coh901318: use dmaengine_terminate_all() API pata_arasan_cf: use dmaengine_terminate_all() API dmaengine: edma: check for echan->edesc => NULL in edma_dma_pause() dmaengine: dw: export probe()/remove() and Co to users dmaengine: dw: enable and disable controller when needed dmaengine: dw: always export dw_dma_{en,dis}able dmaengine: dw: introduce dw_dma_on() helper ...
2014-10-15mtd: sh_flctl: use dmaengine_terminate_all() APIVinod Koul1-1/+1
The drivers should use dmaengine_terminate_all() API instead of accessing the device_control which will be deprecated soon Acked-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-10-15mtd: fsmc_nand: use dmaengine_terminate_all() APIVinod Koul1-1/+1
The drivers should use dmaengine_terminate_all() API instead of accessing the device_control which will be deprecated soon Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-10-06mtd: nand: omap: Correct CONFIG_MTD_NAND_OMAP_BCH help messageRoger Quadros1-1/+1
The MTD_NAND_OMAP_BCH doesn't harm on legacy OMAP platforms so don't state that it should be disabled for them. Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-10-06mtd: nand: Force omap_elm to be built as a module if omap2_nand is a moduleEzequiel Garcia2-2/+5
This commit adds a hidden option to build the omap_elm as a module, if omap2_nand is a module (and similarly in the built-in case). This fixes the following build error when omap2_nand is chosen built-in, and omap_elm is chosen as a module: drivers/built-in.o: In function `omap_nand_probe': drivers/mtd/nand/omap2.c:2010: undefined reference to `elm_config' drivers/mtd/nand/omap2.c:1980: undefined reference to `elm_config' drivers/mtd/nand/omap2.c:1927: undefined reference to `elm_config' drivers/built-in.o: In function `omap_elm_correct_data': drivers/mtd/nand/omap2.c:1444: undefined reference to `elm_decode_bch_error_page' Reported-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-09-22mtd: nand: Move ELM driver and rename as omap_elmEzequiel García2-0/+580
The ELM driver is only used by the OMAP NAND driver, so let's move it to the nand/ directory. Additionally, let's rename it to a less confusing name, so the module is built with a meaningful name, instead of the previous 'elm.ko'. Acked-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-09-22nand: omap2: Replace pr_err with dev_errEzequiel García1-13/+17
Usage of pr_err is frowned upon, so replace it with dev_err. Acked-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-09-22nand: omap2: Remove horrible ifdefs to fix module probeEzequiel García1-59/+71
The current code abuses ifdefs to determine if the selected ECC scheme is supported by the running kernel. As a result the code is hard to read, and it also fails to load as a module. This commit removes all the ifdefs and instead introduces a function omap2_nand_ecc_check() to check if the ECC is supported by using IS_ENABLED(CONFIG_xxx). Since IS_ENABLED() is true when a config is =y or =m, this change fixes the module so it can be loaded with no issues. Acked-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-09-22mtd: nand: add Hynix's H27UCG8T2ATR-BC to nand_ids tableBoris BREZILLON1-0/+4
Add the full description of the Hynix H27UCG8T2ATR-BC NAND chip in the nand_ids table so that we can later use the NAND ECC infos and ONFI timings mode in controller drivers. Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-09-22mtd: nand: support ONFI timing mode retrieval for non-ONFI NANDsBoris BREZILLON1-0/+2
Add an onfi_timing_mode_default field to nand_chip and nand_flash_dev in order to support NAND timings definition for non-ONFI NAND. NAND that support better timings mode than the default one have to define a new entry in the nand_ids table. The default timing mode should be deduced from timings description from the datasheet and the ONFI specification (www.onfi.org/~/media/ONFI/specs/onfi_3_1_spec.pdf, chapter 4.15 "Timing Parameters"). You should choose the closest mode that fit the timings requirements of your NAND chip. Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-09-19mtd: denali: fix indents and other trivial thingsMasahiro Yamada1-77/+61
- Fix indents - Do not break a line unless it is longer than 80 columns - Do not insert a whitespace before ';' - Use whitespaces around operators - Use braces for a "else" block where the "if" block uses ones. Besides, eliminate all the warnings reported by checkpatch.pl: - WARNING: quoted string split across lines - WARNING: else is not generally useful after a break or return - WARNING: Missing a blank line after declarations - WARNING: Avoid line continuations in quoted strings Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-09-19mtd: denali: remove unnecessary parenthesesMasahiro Yamada1-7/+7
We should use parentheses only when they are necessary or they really improve the readability. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Reviewed-by: Josh Triplett <josh@joshtriplett.org> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-09-19mtd: denali: remove another set-but-unused variableBrian Norris1-2/+1
The variable "irq_status" in denali_read_page_raw() is set, but not used. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-09-17mtd: denali: fix include guard and license block of denali.hMasahiro Yamada1-23/+4
It looks like this header file is a concatenation of two headers. Anyway, the include guard should be renamed and placed at the correct postion and the license block in the middle should be deleted. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Reviewed-by: Josh Triplett <josh@joshtriplett.org> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-09-17mtd: nand: don't break long print messagesRafał Miłecki2-22/+15
This follows Chapter 2 of Linux's CodingStyle: > However, never break user-visible strings such as printk messages, > because that breaks the ability to grep for them. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-09-17mtd: bcm47xxnflash: replace some magic numbersRafał Miłecki1-4/+6
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-09-17mtd: bcm47xxnflash: NAND_CMD_RESET supportRafał Miłecki1-1/+5
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-09-17mtd: bcm47xxnflash: add cmd_ctrl handlerRafał Miłecki1-0/+21
This won't be used by NAND subsystem as we implement cmdfunc on our own, but will allow us to write a bit cleaner code. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-09-17mtd: bcm47xxnflash: add dev_ready and fill chip_delayRafał Miłecki1-0/+12
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-09-17mtd: bcm47xxnflash: fix typo in freq calculationRafał Miłecki1-3/+5
We are supposed to mask value, not multiply it. Add some comments btw. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-09-17mtd: atmel_nand: remove pmecc_bytes_per_sector, use chip->ecc.bytes insteadWu, Josh1-8/+5
For PMECC, the pmecc_bytes_per_sector has same meaning as ecc.bytes. So remove pmecc_bytes_per_sector and use ecc.bytes instead. Signed-off-by: Josh Wu <josh.wu@atmel.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-09-17mtd: atmel_nand: remove pmecc_sector_number, use ecc.steps insteadWu, Josh1-8/+6
For PMECC, the pmecc_sector_number has same meaning as ecc.steps. So use ecc.steps to replace the pmecc_sector_number. Signed-off-by: Josh Wu <josh.wu@atmel.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-09-17nand: omap2: Add support for flash-based bad block tableEzequiel García1-1/+5
This commit adds a new platform-data boolean property that enables use of a flash-based bad block table. This can also be enabled by setting the 'nand-on-flash-bbt' devicetree property. If the flash BBT is not enabled, the driver falls back to use OOB bad block markers only, as before. If the flash BBT is enabled the kernel will keep track of bad blocks using a BBT, in addition to the OOB markers. As explained by Brian Norris the reasons for using a BBT are: "" The primary reason would be that NAND datasheets specify it these days. A better argument is that nobody guarantees that you can write a bad block marker to a worn out block; you may just get program failures. This has been acknowledged by several developers over the last several years. Additionally, you get a boot-time performance improvement if you only have to read a few pages, instead of a page or two from every block on the flash. "" Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Acked-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-09-17mtd: nand: atmel_nand: retrieve NFC clockBoris BREZILLON1-0/+25
Retrieve the NFC clock to make sure it is enabled. Make that optional to ensure compatibility with previous device trees but document it as mandatory so newer device trees will include it. Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Josh Wu <josh.wu@atmel.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-09-15mtd: denali: remove a set-but-unused variableMasahiro Yamada1-2/+0
The variable "retry" in wait_for_irq() is set, but not used. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Reviewed-by: Josh Triplett <josh@joshtriplett.org> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-09-15mtd: denali: change the type of iterators to intMasahiro Yamada1-4/+7
We should rathar use "int" type for loop iterators. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-09-15mtd: denali: remove unnecessary castsMasahiro Yamada1-18/+18
Useless casts result in unreadable source code. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-09-15mtd: denali: remove unnecessary variable initializationsMasahiro Yamada1-32/+27
All of these variables are initialized to zero and then set to a different value below. Zero-initializing is redundant. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-09-15mtd: denali: fix the format of comment blocksMasahiro Yamada1-123/+188
We should use /* * Blah Blah ... * ... */ for multi-line comment blocks. In addition, refactor some comments where it seems reasonable and remove some comments where the code is clear enough such as: /* clear interrupts */ clear_interrupts(denali); Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Reviewed-by: Josh Triplett <josh@joshtriplett.org> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-09-15Merge tag 'v3.17-rc5' from upstreamBrian Norris1-4/+12
2014-08-25mtd: nand: omap: Fix 1-bit Hamming code scheme, omap_calculate_ecc()Roger Quadros1-1/+1
commit 65b97cf6b8de introduced in v3.7 caused a regression by using a reversed CS_MASK thus causing omap_calculate_ecc to always fail. As the NAND base driver never checks for .calculate()'s return value, the zeroed ECC values are used as is without showing any error to the user. However, this won't work and the NAND device won't be guarded by any error code. Fix the issue by using the correct mask. Code was tested on omap3beagle using the following procedure - flash the primary bootloader (MLO) from the kernel to the first NAND partition using nandwrite. - boot the board from NAND. This utilizes OMAP ROM loader that relies on 1-bit Hamming code ECC. Fixes: 65b97cf6b8de (mtd: nand: omap2: handle nand on gpmc) Cc: <stable@vger.kernel.org> [3.7+] Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-08-25mtd: nand: omap: Revert to using software ECC by defaultRoger Quadros1-3/+11
For v3.12 and prior, 1-bit Hamming code ECC via software was the default choice. Commit c66d039197e4 in v3.13 changed the behaviour to use 1-bit Hamming code via Hardware using a different ECC layout i.e. (ROM code layout) than what is used by software ECC. This ECC layout change causes NAND filesystems created in v3.12 and prior to be unusable in v3.13 and later. So revert back to using software ECC by default if an ECC scheme is not explicitely specified. This defect can be observed on the following boards during legacy boot -omap3beagle -omap3touchbook -overo -am3517crane -devkit8000 -ldp -3430sdp Signed-off-by: Roger Quadros <rogerq@ti.com> Tested-by: Grazvydas Ignotas <notasas@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-08-19mtd: nand: Use ULL-suffix for big u64 constantGeert Uytterhoeven1-1/+1
drivers/mtd/nand/nand_timings.c:45: warning: integer constant is too large for ‘long’ type [ Editorial note: This is a false warning. Looking at ISO draft N1124 (this is approximately C11, the first PDF I had lying around), section 6.4.4.1 (statement 5): "The type of an integer constant is the first of the corresponding list in which its value can be represented." So this should not be an overflow, and any toolchain that says so (e.g., GCC 4.4) is buggy. -Brian ] Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-08-19mtd: atmel_nand: NFC: fix mtd_nandbiterrs.ko test fail when using sram writeWu, Josh1-8/+9
When enable NFC sram write, it will failed the mtd_nandbiterrs.ko test. As in driver's nfc_sram_write_page(), if ops->mode equal to MTD_OSP_RAW, driver assumes the data buffer contains one page data and one oob data followed. And driver will write the page data and oob data to nand. But this is wrong implementation. Since the data buffer don't contains the oob data to write. We should write the chip->oob_poi to nand's oob. So this patch fix it by writing the oob data from chip->oob_poi. Signed-off-by: Josh Wu <josh.wu@atmel.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-08-19mtd: nand: fix integer widening problemsBrian Norris1-2/+2
chip->pagebuf is a 32-bit type (int), so the shift will only be applied as 32-bit. Fix this for 64-bit safety. Caught by Coverity. Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-08-19mtd: nandsim: fix integer wideningBrian Norris1-1/+1
This multiplication should be done in 64-bit, not 32-bit. Caught by Coverity. Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-08-19mtd: nand: denali: set proper error code on timeoutBrian Norris1-3/+1
The condition "if (irq_status == 0)" already ensures that one half of the ternary ?: is dead. I think this should probably actually be a FAIL, not a PASS. Caught by Coverity. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Cc: Jamie Iles <jamie@jamieiles.com>
2014-08-19mtd: use __packed shorthandBrian Norris1-1/+1
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-08-19mtd: nand: fix nand_lock/unlock() functionWhite Ding1-0/+18
Do nand reset before write protect check. If we want to check the WP# low or high through STATUS READ and check bit 7, we must reset the device, other operation (eg.erase/program a locked block) can also clear the bit 7 of status register. As we know the status register can be refreshed, if we do some operation to trigger it, for example if we do erase/program operation to one block that is locked, then READ STATUS, the bit 7 of READ STATUS will be 0 indicate the device in write protect, then if we do erase/program operation to another block that is unlocked, the bit 7 of READ STATUS will be 1 indicate the device is not write protect. Suppose we checked the bit 7 of READ STATUS is 0 then judge the WP# is low (write protect), but in this case the WP# maybe high if we do erase/program operation to a locked block, so we must reset the device if we want to check the WP# low or high through STATUS READ and check bit 7. Signed-off-by: White Ding <bpqw@micron.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-08-19mtd: denali: avoid using a magic numberMasahiro Yamada1-1/+2
MAP10 command with '0x2000' data sets up a read-ahead/write access. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-08-19mtd: atmel_nand: remove redundant dev_err callWei Yongjun1-8/+1
There is a error message within devm_ioremap_resource already, so remove the dev_err call to avoid redundant error message. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-08-19mtd: atmel_nand: add pmecc support for 512, 1k, 4k, 8k page sizeWu, Josh1-5/+11
PMECC can support 512, 1k, 2k, 4k, 8k page size. The driver currently only support 2k page size nand flash. So this patch add support to 512, 1k, 4k and 8k page size nand flash. Signed-off-by: Josh Wu <josh.wu@atmel.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-08-19mtd: atmel_nand: increase chip_delayRaphaël Poggi1-1/+1
Some nand with 8k page size like Micron MT29F32G08ABAAAWP need more than 20us. Signed-off-by: Raphaël Poggi <poggi.raph@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-08-19mtd: ndfc: silence an array underflow static checker warningDan Carpenter1-1/+2
We check "cs" for array overflows but we don't check for underflows and it upsets the static checkers. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-08-08Merge tag 'for-linus-20140808' of git://git.infradead.org/linux-mtdLinus Torvalds12-107/+443
Pull MTD updates from Brian Norris: "AMD-compatible CFI driver: - Support OTP programming for Micron M29EW family - Increase buffer write timeout, according to detected flash parameter info NAND - Add helpers for retrieving ONFI timing modes - GPMI: provide option to disable bad block marker swapping (required for Ka-On electronics platforms) SPI NOR - EON EN25QH128 support - Support new Flag Status Register (FSR) on a few Micron flash Common - New sysfs entries for bad block and ECC stats And a few miscellaneous refactorings, cleanups, and driver improvements" * tag 'for-linus-20140808' of git://git.infradead.org/linux-mtd: (31 commits) mtd: gpmi: make blockmark swapping optional mtd: gpmi: remove line breaks from error messages and improve wording mtd: gpmi: remove useless (void *) type casts and spaces between type casts and variables mtd: atmel_nand: NFC: support multiple interrupt handling mtd: atmel_nand: implement the nfc_device_ready() by checking the R/B bit mtd: atmel_nand: add NFC status error check mtd: atmel_nand: make ecc parameters same as definition mtd: nand: add ONFI timing mode to nand_timings converter mtd: nand: define struct nand_timings mtd: cfi_cmdset_0002: fix do_write_buffer() timeout error mtd: denali: use 8 bytes for READID command mtd/ftl: fix the double free of the buffers allocated in build_maps() mtd: phram: Fix whitespace issues mtd: spi-nor: add support for EON EN25QH128 mtd: cfi_cmdset_0002: Add support for locking OTP memory mtd: cfi_cmdset_0002: Add support for writing OTP memory mtd: cfi_cmdset_0002: Invalidate cache after entering/exiting OTP memory mtd: cfi_cmdset_0002: Add support for reading OTP mtd: spi-nor: add support for flag status register on Micron chips mtd: Account for BBT blocks when a partition is being allocated ...
2014-08-07Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds1-16/+13
Pull MIPS updates from Ralf Baechle: "This is the main pull request for 3.17. It contains: - misc Cavium Octeon, BCM47xx, BCM63xx and Alchemy updates - MIPS ptrace updates and cleanups - various fixes that will also go to -stable - a number of cleanups and small non-critical fixes. - NUMA support for the Loongson 3. - more support for MSA - support for MAAR - various FP enhancements and fixes" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (139 commits) MIPS: jz4740: remove unnecessary null test before debugfs_remove MIPS: Octeon: remove unnecessary null test before debugfs_remove_recursive MIPS: ZBOOT: implement stack protector in compressed boot phase MIPS: mipsreg: remove duplicate MIPS_CONF4_FTLBSETS_SHIFT MIPS: Bonito64: remove a duplicate define MIPS: Malta: initialise MAARs MIPS: Initialise MAARs MIPS: detect presence of MAARs MIPS: define MAAR register accessors & bits MIPS: mark MSA experimental MIPS: Don't build MSA support unless it can be used MIPS: consistently clear MSA flags when starting & copying threads MIPS: 16 byte align MSA vector context MIPS: disable preemption whilst initialising MSA MIPS: ensure MSA gets disabled during boot MIPS: fix read_msa_* & write_msa_* functions on non-MSA toolchains MIPS: fix MSA context for tasks which don't use FP first MIPS: init upper 64b of vector registers when MSA is first used MIPS: save/disable MSA in lose_fpu MIPS: preserve scalar FP CSR when switching vector context ...
2014-07-30MIPS: Alchemy: remove au_read/write/syncManuel Lauss1-11/+10
replace au_read/write/sync with __raw_read/write and wmb. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Cc: Linux-MIPS <linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/7465/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-07-30MIPS: Alchemy: add helpers to access static memory ctrl registers.Manuel Lauss1-5/+3
This patch changes the static memory controller registers to offsets from base, prefixes them with AU1000_ to avoid silent failures due to changed addresses and introduces helpers to access them. No functional changes, comparing assembly of a few select functions shows no differences. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Cc: Linux-MIPS <linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/7463/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-22 13:51:45 +0000