summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/msm/msm_atomic.c
AgeCommit message (Collapse)AuthorFilesLines
2019-09-03drm/msm: add atomic tracesRob Clark1-3/+21
This was useful for debugging fps drops. I suspect it will be useful again. Signed-off-by: Rob Clark <robdclark@chromium.org> Reviewed-by: Sean Paul <sean@poorly.run>
2019-09-03drm/msm/dpu: async commit supportRob Clark1-4/+1
In addition, moving to kms->flush_commit() lets us drop the only user of kms->commit(). Signed-off-by: Rob Clark <robdclark@chromium.org> Reviewed-by: Sean Paul <sean@poorly.run>
2019-09-03drm/msm: async commit supportRob Clark1-1/+155
Now that flush/wait/complete is decoupled from the "synchronous" part of atomic commit_tail(), add support to defer flush to a timer that expires shortly before vblank for async commits. In this way, multiple atomic commits (for example, cursor updates) can be coalesced into a single flush at the end of the frame. v2: don't hold lock over ->wait_flush(), to avoid locking interaction that was causing fps drop when combining page flips or non-async atomic commits and lots of legacy cursor updates Signed-off-by: Rob Clark <robdclark@chromium.org> Reviewed-by: Sean Paul <sean@poorly.run>
2019-09-03drm/msm: split power control from prepare/complete_commitRob Clark1-0/+2
With atomic commit, ->prepare_commit() and ->complete_commit() may not be evenly balanced (although ->complete_commit() will complete each crtc that had been previously prepared). So these will no longer be a good place to enable/disable clocks needed for hw access. Signed-off-by: Rob Clark <robdclark@chromium.org> Reviewed-by: Sean Paul <sean@poorly.run>
2019-09-03drm/msm: add kms->flush_commit()Rob Clark1-2/+7
Add ->flush_commit(crtc_mask). Currently a no-op, but kms backends should migrate writing flush registers to this hook, so we can decouple pushing updates to hardware, and flushing the updates. Once we add async commit support, the hw updates will be pushed down to the hw synchronously, but flushing the updates will be deferred until as close to vblank as possible, so that multiple updates can be combined in a single frame. Signed-off-by: Rob Clark <robdclark@chromium.org> Reviewed-by: Sean Paul <sean@poorly.run>
2019-09-03drm/msm: convert kms->complete_commit() to crtc_maskRob Clark1-1/+1
Prep work for async commits, in which case this will be called after we no longer have the atomic state object. This drops some wait_for_vblanks(), but those should be unnecessary, as we call this after waiting for flush to complete. Signed-off-by: Rob Clark <robdclark@chromium.org> Reviewed-by: Sean Paul <sean@poorly.run>
2019-09-03drm/msm: add kms->wait_flush()Rob Clark1-24/+18
First step in re-working the atomic related internal API to prepare for async updates pending.. ->wait_flush() is intended to block until there is no in-progress flush. A crtc_mask is used, rather than an atomic state object, as this will later be used for async flush after the atomic state is destroyed. This replaces ->wait_for_crtc_commit_done() v2: update for review comments Signed-off-by: Rob Clark <robdclark@chromium.org>
2019-09-03drm/msm/dpu: unwind async commit handlingRob Clark1-2/+1
It attempted to avoid fps drops in the presence of cursor updates. But it is racing, and can result in hw updates after flush before vblank, which leads to underruns. Signed-off-by: Rob Clark <robdclark@chromium.org> Reviewed-by: Sean Paul <sean@poorly.run> Signed-off-by: Rob Clark <robdclark@chromium.org>
2019-09-03drm/msm: drop use of drmP.hSam Ravnborg1-0/+1
Drop the deprecated drmP.h header file, and trim msm_drv.h to the relevant include files. This resulted in a suprisingly many edits as many files relied on headers included via msm_drv.h. But msm_drv.h is not supposed to carry include files it do not need, so the individual files have to include what extra they needs. v2: - Rebased on top of https://gitlab.freedesktop.org/drm/msm.git msm-next Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Rob Clark <robdclark@gmail.com> Cc: Sean Paul <sean@poorly.run> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Jordan Crouse <jcrouse@codeaurora.org> Cc: Jeykumar Sankaran <jsanka@codeaurora.org> Cc: Bruce Wang <bzwang@chromium.org> Cc: Shayenne Moura <shayenneluzmoura@gmail.com> Cc: Mamta Shukla <mamtashukla555@gmail.com> Cc: Jonathan Marek <jonathan@marek.ca> Cc: Carsten Behling <carsten.behling@googlemail.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <maxime.ripard@bootlin.com> Cc: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Cc: Sibi Sankar <sibis@codeaurora.org> Cc: Todor Tomov <todor.tomov@linaro.org> Cc: linux-arm-msm@vger.kernel.org Cc: freedreno@lists.freedesktop.org Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190804065551.GA5211@ravnborg.org
2019-07-22Merge v5.3-rc1 into drm-misc-nextMaxime Ripard1-12/+1
Noralf needs some SPI patches in 5.3 to merge some work on tinydrm. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-06-28drm/msm: Use drm_gem_fb_prepare_fbDaniel Vetter1-6/+2
msm has switched over to drm_fb->obj[] a while ago already, so we can just use the helper. v2: Make it compile ... oops. Cc: Eric Anholt <eric@anholt.net> Cc: Emil Velikov <emil.velikov@collabora.com> Reviewed-by: Eric Anholt <eric@anholt.net> Reviewed-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: Rob Clark <robdclark@gmail.com> Cc: Sean Paul <sean@poorly.run> Cc: Jeykumar Sankaran <jsanka@codeaurora.org> Cc: Jordan Crouse <jcrouse@codeaurora.org> Cc: Bruce Wang <bzwang@chromium.org> Cc: Fritz Koenig <frkoenig@google.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: linux-arm-msm@vger.kernel.org Cc: freedreno@lists.freedesktop.org Link: https://patchwork.freedesktop.org/patch/msgid/20190625204208.5614-3-daniel.vetter@ffwll.ch
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 234Thomas Gleixner1-12/+1
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not see http www gnu org licenses extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 503 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Enrico Weigelt <info@metux.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190602204653.811534538@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-14drm/msm: remove resv fields from msm_gem_object structBrian Masney1-3/+1
The msm_gem_object structure contains resv and _resv fields that are no longer needed since the reservation object is now stored on drm_gem_object. msm_atomic_prepare_fb() and msm_atomic_prepare_fb() both referenced the wrong reservation object, and would lead to an attempt to dereference a NULL pointer. Correct those two cases to point to the correct reservation object. Fixes: dd55cf6929e6 ("drm: msm: Switch to use drm_gem_object reservation_object") Cc: David Airlie <airlied@linux.ie> Cc: linux-arm-msm@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Cc: freedreno@lists.freedesktop.org Cc: Rob Herring <robh@kernel.org> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Rob Clark <robdclark@gmail.com> Cc: Maxime Ripard <maxime.ripard@bootlin.com> Cc: Sean Paul <sean@poorly.run> Acked-by: Rob Clark <robdclark@chromium.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Brian Masney <masneyb@onstation.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190513234105.7531-1-masneyb@onstation.org
2018-12-25Merge tag 'drm-next-2018-12-14' of git://anongit.freedesktop.org/drm/drmLinus Torvalds1-1/+2
Pull drm updates from Dave Airlie: "Core: - shared fencing staging removal - drop transactional atomic helpers and move helpers to new location - DP/MST atomic cleanup - Leasing cleanups and drop EXPORT_SYMBOL - Convert drivers to atomic helpers and generic fbdev. - removed deprecated obj_ref/unref in favour of get/put - Improve dumb callback documentation - MODESET_LOCK_BEGIN/END helpers panels: - CDTech panels, Banana Pi Panel, DLC1010GIG, - Olimex LCD-O-LinuXino, Samsung S6D16D0, Truly NT35597 WQXGA, - Himax HX8357D, simulated RTSM AEMv8. - GPD Win2 panel - AUO G101EVN010 vgem: - render node support ttm: - move global init out of drivers - fix LRU handling for ghost objects - Support for simultaneous submissions to multiple engines scheduler: - timeout/fault handling changes to help GPU recovery - helpers for hw with preemption support i915: - Scaler/Watermark fixes - DP MST + powerwell fixes - PSR fixes - Break long get/put shmemfs pages - Icelake fixes - Icelake DSI video mode enablement - Engine workaround improvements amdgpu: - freesync support - GPU reset enabled on CI, VI, SOC15 dGPUs - ABM support in DC - KFD support for vega12/polaris12 - SDMA paging queue on vega - More amdkfd code sharing - DCC scanout on GFX9 - DC kerneldoc - Updated SMU firmware for GFX8 chips - XGMI PSP + hive reset support - GPU reset - DC trace support - Powerplay updates for newer Polaris - Cursor plane update fast path - kfd dma-buf support virtio-gpu: - add EDID support vmwgfx: - pageflip with damage support nouveau: - Initial Turing TU104/TU106 modesetting support msm: - a2xx gpu support for apq8060 and imx5 - a2xx gpummu support - mdp4 display support for apq8060 - DPU fixes and cleanups - enhanced profiling support - debug object naming interface - get_iova/page pinning decoupling tegra: - Tegra194 host1x, VIC and display support enabled - Audio over HDMI for Tegra186 and Tegra194 exynos: - DMA/IOMMU refactoring - plane alpha + blend mode support - Color format fixes for mixer driver rcar-du: - R8A7744 and R8A77470 support - R8A77965 LVDS support imx: - fbdev emulation fix - multi-tiled scalling fixes - SPDX identifiers rockchip - dw_hdmi support - dw-mipi-dsi + dual dsi support - mailbox read size fix qxl: - fix cursor pinning vc4: - YUV support (scaling + cursor) v3d: - enable TFU (Texture Formatting Unit) mali-dp: - add support for linear tiled formats sun4i: - Display Engine 3 support - H6 DE3 mixer 0 support - H6 display engine support - dw-hdmi support - H6 HDMI phy support - implicit fence waiting - BGRX8888 support meson: - Overlay plane support - implicit fence waiting - HDMI 1.4 4k modes bridge: - i2c fixes for sii902x" * tag 'drm-next-2018-12-14' of git://anongit.freedesktop.org/drm/drm: (1403 commits) drm/amd/display: Add fast path for cursor plane updates drm/amdgpu: Enable GPU recovery by default for CI drm/amd/display: Fix duplicating scaling/underscan connector state drm/amd/display: Fix unintialized max_bpc state values Revert "drm/amd/display: Set RMX_ASPECT as default" drm/amdgpu: Fix stub function name drm/msm/dpu: Fix clock issue after bind failure drm/msm/dpu: Clean up dpu_media_info.h static inline functions drm/msm/dpu: Further cleanups for static inline functions drm/msm/dpu: Cleanup the debugfs functions drm/msm/dpu: Remove dpu_irq and unused functions drm/msm: Make irq_postinstall optional drm/msm/dpu: Cleanup callers of dpu_hw_blk_init drm/msm/dpu: Remove unused functions drm/msm/dpu: Remove dpu_crtc_is_enabled() drm/msm/dpu: Remove dpu_crtc_get_mixer_height drm/msm/dpu: Remove dpu_dbg drm/msm: dpu: Remove crtc_lock drm/msm: dpu: Remove vblank_requested flag from dpu_crtc drm/msm: dpu: Separate crtc assignment from vblank enable ...
2018-12-11drm/msm: dpu: Make legacy cursor updates asynchronousSean Paul1-1/+2
This patch sprinkles a few async/legacy_cursor_update checks through commit to ensure that cursor updates aren't blocked on vsync. There are 2 main components to this, the first is that we don't want to wait_for_commit_done in msm_atomic before returning from atomic_complete. The second is that in dpu we don't want to wait for frame_done events when updating the cursor. Changes in v2: - None Reviewed-by: Jeykumar Sankaran <jsanka@codeaurora.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-11-30drm/msm: Grab a vblank reference when waiting for commit_doneSean Paul1-0/+5
Similar to the atomic helpers, we should enable vblank while we're waiting for the commit to finish. DPU needs this, MDP5 seems to work fine without it. Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-09-09drm: extract drm_atomic_uapi.cDaniel Vetter1-0/+2
This leaves all the commit/check and state handling in drm_atomic.c, while pulling all the uapi glue and the huge ioctl itself into a seprate file. This seems to almost perfectly split the rather big drm_atomic.c file into 2 equal sizes. Also adjust the kerneldoc and type a very terse overview text. v2: Rebase. v3: Fix tiny typo. v4: - Fixup armada, newly converted atomic driver hooray! - Fixup msm/dpu1, newly added too. Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: David Airlie <airlied@linux.ie> Cc: Gustavo Padovan <gustavo@padovan.org> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Sean Paul <seanpaul@chromium.org> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Rob Clark <robdclark@gmail.com> Cc: Eric Anholt <eric@anholt.net> Cc: intel-gfx@lists.freedesktop.org Cc: linux-arm-msm@vger.kernel.org Cc: freedreno@lists.freedesktop.org Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180905135711.28370-7-daniel.vetter@ffwll.ch
2018-07-26drm/msm: Add .commit() callback to msm_kms functionsJeykumar Sankaran1-0/+5
Called right before wait_for_commit_done() to perform kickoff for active crtcs. Changes in v3: - None Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org> [seanpaul split this out of the megapatch] Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-07-26drm/msm: Move wait_for_vblanks into mdp complete_commit() hooksSean Paul1-2/+0
DPU doesn't use this, so push it into the mdp drivers. Changes in v3: - None Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Rajesh Yadav <ryadav@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-06-04drm/msm: Switch to atomic_helper_commit()Sean Paul1-138/+1
Now that all of the msm-specific goo is tucked safely away we can switch over to using the atomic helper commit directly. \o/ Changes in v2: - None Changes in v3: - Rebased on Archit's private_obj set Changes in v4: - None Cc: Abhinav Kumar <abhinavk@codeaurora.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-06-04drm/msm: Remove msm_commit/worker, use atomic helper commitSean Paul1-111/+42
Moving further towards switching fully to the the atomic helpers, this patch removes the hand-rolled worker nonblock commit code and uses the atomic helpers commit_work model. Changes in v2: - Remove commit_destroy() - Shuffle order of commit_tail calls to further serialize commits - Use stall in swap_state to avoid abandoned events on disable Changes in v3: - Rebased on Archit's private_obj set Changes in v4: - None Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-06-04drm/msm: Move implicit sync handling to prepare_fbSean Paul1-0/+22
In preparation for moving to atomic helpers, move the implicit sync fence handling out of atomic commit and into the plane->prepare_fb() hook. While we're at it, de-duplicate the mdp*_prepare_fb functions. Changes in v4: - Added Reported-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-06-04drm/msm: Refactor complete_commit() to look more the helpersSean Paul1-9/+16
Factor out the commit_tail() portions of complete_commit() into a separate function to facilitate moving to the atomic helpers in future patches. Changes in v2: - None Changes in v3: - Rebased on Archit's private_obj set Changes in v4: - None Cc: Jeykumar Sankaran <jsanka@codeaurora.org> Reviewed-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-06-03drm/msm: Don't subclass drm_atomic_state anymoreArchit Taneja1-31/+0
With the addition of "private_objs" in drm_atomic_state, we no longer need to subclass drm_atomic_state to store state of share resources that don't perfectly fit within planes/crtc/connector state information. We can now save this state within drm_atomic_state itself using the private objects. Remove the infrastructure that allowed subclassing of drm_atomic_state in the driver. Changes in v3: - Added to the msm atomic helper patch set Changes in v4: - None Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Sean Paul <seanpaul@chromium.org>
2017-10-28drm/msm: update cursors asynchronously through atomicGustavo Padovan1-0/+12
Add support to async updates of cursors by using the new atomic interface for that. Basically what this commit does is do what mdp5_update_cursor_plane_legacy() did but through atomic. v5: call drm_atomic_helper_async_check() from the check hook v4: add missing atomic async commit call to msm_atomic_commit(Archit Taneja) v3: move size checks back to drivers (Ville Syrjälä) v2: move fb setting to core and use new state (Eric Anholt) Cc: Rob Clark <robdclark@gmail.com> Cc: Archit Taneja <architt@codeaurora.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com> Tested-by: Archit Taneja <architt@codeaurora.org> (v4) [added comment about not hitting async update path if hwpipes are re-assigned or global state is touched] Signed-off-by: Rob Clark <robdclark@gmail.com>
2017-10-28drm/msm/atomic: switch to drm_atomic_helper_checkRob Clark1-29/+0
Signed-off-by: Rob Clark <robdclark@gmail.com>
2017-08-01drm/msm: Convert to use new iterator macros, v2.Maarten Lankhorst1-9/+9
for_each_obj_in_state is about to be removed, so convert to the new iterator macros. Just like in omap, use crtc_state->active instead of crtc_state->enable when waiting for completion. Changes since v1: - Fix compilation. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Rob Clark <robdclark@gmail.com> Cc: Archit Taneja <architt@codeaurora.org> Cc: Vincent Abriou <vincent.abriou@st.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Russell King <rmk+kernel@armlinux.org.uk> Cc: Rob Herring <robh@kernel.org> Cc: Markus Elfring <elfring@users.sourceforge.net> Cc: Sushmita Susheelendra <ssusheel@codeaurora.org> Cc: linux-arm-msm@vger.kernel.org Cc: freedreno@lists.freedesktop.org Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Tested-by: Archit Taneja <architt@codeaurora.org> Link: https://patchwork.freedesktop.org/patch/msgid/20170719143920.25685-6-maarten.lankhorst@linux.intel.com
2017-07-26drm/msm: Handle drm_atomic_helper_swap_state failureMaarten Lankhorst1-8/+8
drm_atomic_helper_swap_state() will be changed to interruptible waiting in the next few commits, so all drivers have to be changed to handling failure. MSM has its own busy tracking, which means the swap_state call can be done with stall = false, in which case it should never return an error. Handle failure with BUG_ON for this reason. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Rob Clark <robdclark@gmail.com> Cc: linux-arm-msm@vger.kernel.org Cc: freedreno@lists.freedesktop.org Link: http://patchwork.freedesktop.org/patch/msgid/20170711143314.2148-8-maarten.lankhorst@linux.intel.com Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Sean Paul <seanpaul@chromium.org> Tested-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2017-02-06drm/msm/mdp5: Add cursor planesArchit Taneja1-5/+0
Register cursor drm_planes. The loop in modeset_init that inits the planes and crtcs has to be refactored a bit. We first iterate all the hwpipes to find the cursor planes. Then, we loop again to create crtcs. In msm_atomic_wait_for_commit_done, remove the check which bypasses waiting for vsyncs if state->legacy_cursor_updates is true. We will later create a fast path for cursor position changes in the cursor plane's update_plane func that doesn't go via the regular atomic commit path. For rest of cursor related updates, we will have to wait for vsyncs, so ignore the legacy_cursor_updates flag. Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2017-02-06drm/msm/mdp5: Use plane helpers to configure src/dst rectanglesArchit Taneja1-6/+15
The MDP5 plane's atomic_check ops doesn't perform clipping tests. This didn't hurt us much in the past, but clipping becomes important with cursor planes. Use drm_plane_helper_check_state, the way rockchip/intel/mtk drivers already do. Use these drivers as reference. Clipping requires knowledge of the crtc width and height. This requires us to call drm_atomic_helper_check_modeset before drm_atomic_helper_check_planes in the driver's atomic_check op, because check_modetest will populate the mode for the crtc, needed to populate the clip rectangle. We update the plane_enabled(state) local helper to use state->visible, since state->visible and 'state->fb && state->crtc' represent the same thing. One issue with the existing code is that we don't have a way to disable the plane when it's completely clipped out. Until there isn't an update on the crtc (which would de-stage the plane), we would still see the plane in its last 'visible' configuration. Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2016-11-27drm/msm: subclass drm_atomic_stateRob Clark1-0/+31
This will give the kms backends a slot to stash their own hw specific global state. Signed-off-by: Rob Clark <robdclark@gmail.com>
2016-11-08drm/msm: use drm_atomic_set_fence_for_plane() to set the fenceGustavo Padovan1-1/+2
drm_atomic_set_fence_for_plane() is smart and won't overwrite plane_state->fence if the user already set an explicit fence there. Cc: Rob Clark <robdclark@gmail.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1478513013-3221-3-git-send-email-gustavo@padovan.org
2016-10-17drm: Add reference counting to drm_atomic_stateChris Wilson1-1/+2
drm_atomic_state has a complicated single owner model that tracks the single reference from allocation through to destruction on another thread - or perhaps on a local error path. We can simplify this tracking by using reference counting (at a cost of a few more atomics). This is even more beneficial when the lifetime of the state becomes more convoluted than being passed to a single worker thread for the commit. v2: Double check !intel atomic_commit functions for missing gets v3: Update kerneldocs Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: dri-devel@lists.freedesktop.org Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com> Reviewed-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20161014121833.439-27-chris@chris-wilson.co.uk
2016-09-12drm/fence: allow fence waiting to be interrupted by userspaceGustavo Padovan1-1/+1
If userspace is running an synchronously atomic commit and interrupts the atomic operation during fence_wait() it will hang until the timer expires, so here we change the wait to be interruptible so it stop immediately when userspace wants to quit. Also adds the necessary error checking for fence_wait(). v2: Comment by Daniel Vetter - Add error checking for fence_wait() v3: Rebase on top of new atomic noblocking support v4: Comment by Maarten Lankhorst - remove 'swapped' bitfield as it was duplicating information v5: Comments by Maarten Lankhorst - assign plane->state to plane_state if !intr - squash previous patch into this one v6: Comment by Sean Paul - rename intr to pre_swap Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> [seanpaul fixed a couple checkpatch warnings and moved the preswap comment] Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: http://patchwork.freedesktop.org/patch/msgid/1473707291-14781-1-git-send-email-gustavo@padovan.org
2016-08-29drm/atomic-helper: Add NO_DISABLE_AFTER_MODESET flag support for plane commitLiu Ying1-1/+1
Drivers may set the NO_DISABLE_AFTER_MODESET flag in the 'flags' parameter of the helper drm_atomic_helper_commit_planes() if the relevant display controllers(e.g., IPUv3 for imx-drm) require to disable a CRTC's planes when the CRTC is disabled. The helper would skip the ->atomic_disable call for a plane if the CRTC of the old plane state needs a modesetting operation. Of course, the drivers need to disable the planes in their CRTC disable callbacks since no one else would do that. Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: David Airlie <airlied@linux.ie> Cc: Russell King <linux@armlinux.org.uk> Cc: Peter Senna Tschudin <peter.senna@gmail.com> Cc: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Liu Ying <gnuiyl@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1472461923-14364-1-git-send-email-gnuiyl@gmail.com
2016-06-10drm/atomic-helper: Massage swap_state signature somewhatDaniel Vetter1-1/+1
- dev is redundant, we have state->atomic - add stall parameter, which must be set when swapping needs to stall for preceeding commits to stop looking at ->state pointers. Currently all drivers need this to be, just prep work for a glorious future. v2: Rebased on top of commit e7cf0963f816fa44190caaf51aeffaa614c340c6 Author: Gerd Hoffmann <kraxel@redhat.com> Date: Tue May 31 08:50:47 2016 +0200 virtio-gpu: add atomic_commit function Cc: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1465509992-19284-1-git-send-email-daniel.vetter@ffwll.ch Link: http://patchwork.freedesktop.org/patch/msgid/1465388359-8070-2-git-send-email-daniel.vetter@ffwll.ch
2016-06-02drm/msm: Use for_each_*_in_stateDaniel Vetter1-25/+12
We want to hide drm_atomic_state internals v2: Review from Maarten: - remove whitespace change in rockchip driver that slipped in. - use drm_crtc_mask insted of open-coding it. Cc: Rob Clark <robdclark@gmail.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1464818821-5736-4-git-send-email-daniel.vetter@ffwll.ch
2016-05-08drm/msm: 'struct fence' conversionRob Clark1-22/+20
Signed-off-by: Rob Clark <robdclark@gmail.com>
2016-05-08drm/msm: remove fence_cbsRob Clark1-45/+32
This was only used for atomic commit these days. So instead just give atomic it's own work-queue where we can do a block on each bo in turn. Simplifies things a whole bunch and makes the 'struct fence' conversion easier. Signed-off-by: Rob Clark <robdclark@gmail.com>
2016-05-08drm/msm: introduce msm_fence_contextRob Clark1-3/+6
Better encapsulate the per-timeline stuff into fence-context. For now there is just a single fence-context, but eventually we'll also have one per-CRTC to enable fully explicit fencing. Signed-off-by: Rob Clark <robdclark@gmail.com>
2016-05-08drm/msm: move fence code to it's own fileRob Clark1-0/+1
Signed-off-by: Rob Clark <robdclark@gmail.com>
2016-05-02drm/msm: Rename async to nonblock.Maarten Lankhorst1-5/+4
The async name is deprecated and should be changed to nonblocking. Also comments seem to be a bit outdated, as it looks like nonblocking commit is supported by msm. Cc: Rob Clark <robdclark@gmail.com> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1461679905-30177-6-git-send-email-maarten.lankhorst@linux.intel.com
2015-09-08drm/atomic-helper: Add option to update planes only on active crtcDaniel Vetter1-1/+1
With drivers supporting runtime pm it's generally not a good idea to touch the hardware when it's off. Add an option to the commit_planes helper to support this case. Note that the helpers already add all planes on a crtc when a modeset happens, hence plane updates will not be lost if drivers set this to true. v2: Check for NULL state->crtc before chasing the pointer. Also check both old and new crtc if there's a switch. Finally just outright disallow switching crtcs for a plane if the plane is in active use, on most hardware that doesn't make sense. v3: Since commit_planes(active_only = true) is for enabling things only after all the crtc are on we should only look at the new crtc to decide whether to call the plane hooks - if the current CRTC isn't on then skip. If the old crtc (when moving a plane) went down then the plane should have been disabled as part of the pipe shutdown work already. For which there's currently no helper really unfortunately. Also move the check for wether a plane gets a new CRTC assigned while still in active use out of this patch. v4: Rebase over exynos changes. Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Thierry Reding <treding@nvidia.com> Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Tested-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
2015-07-29drm/msm: change to uninterruptible wait in atomic commitWentao Xu1-6/+2
The atomic commit cannot easily undo and return an error once the state is swapped. Change to uninterruptible wait, and ignore the timeout error. Signed-off-by: Wentao Xu <wentaox@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2015-06-11drm/msm: fix timeout calculationRob Clark1-2/+2
The 'timeout' value comes from userspace (CLOCK_MONOTONIC), but converting this directly to jiffies doesn't take into account the initial jiffies count at boot, which may differ from the base time of CLOCK_MONOTONIC. TODO: add ktime_delta_jiffies() when rebasing on 4.1 and use that instead of ktime_sub/ktime_to_timespec/timespec_to_jiffies combo (as suggested by Arnd) v2: switch over from 'struct timespec' to ktime_t throughout, since 'struct timespec' will be deprecated (as suggested by Arnd) v3: minor cosmetic tweaks Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Rob Clark <robdclark@gmail.com>
2015-06-11drm/msm/atomic: Clean up planes in the error paths of .atomic_commit()Laurent Pinchart1-3/+9
When the .atomic_commit() handler fails, clean up planes previoulsy prepared by drm_atomic_helper_prepare_planes() with a call to drm_atomic_helper_cleanup_planes(). Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Rob Clark <robdclark@gmail.com>
2015-06-11drm/msm: Use customized function to wait for atomic commit doneHai Li1-2/+28
MDP FLUSH registers could indicate if the previous flush updates has taken effect at vsync boundary. Making use of this H/W feature can catch the vsync that happened between CRTC atomic_flush and *_wait_for_vblanks, to avoid unnecessary wait. This change allows kms CRTCs to use their own *_wait_for_commit_done functions to wait for FLUSH register cleared at vsync, before commit completion. Signed-off-by: Hai Li <hali@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2015-03-09Merge tag 'v4.0-rc3' into drm-nextDave Airlie1-1/+3
Linux 4.0-rc3 backmerge to fix two i915 conflicts, and get some mainline bug fixes needed for my testing box Conflicts: drivers/gpu/drm/i915/i915_drv.h drivers/gpu/drm/i915/intel_display.c
2015-03-04drm/msm/atomic: Don't leak atomic commit object when commit failsLaurent Pinchart1-1/+3
If the atomic commit fails due to completion wait interruption the atomic commit object is not freed and is thus leaked. Free it. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Rob Clark <robdclark@gmail.com>
2015-02-24drm/atomic-helper: Rename commmit_post/pre_planesDaniel Vetter1-2/+2
These names only make sense because of backwards compatability with the order used by the crtc helper library. There's not really any real requirement in the ordering here. So rename them to something more descriptive and update the kerneldoc a bit. Motivated in a discussion with Laurent about how to restore plane state for dpms for drivers with runtime pm. v2: Squash in fixup from Stephen Rothwell to fix a conflict with tegra. Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Rob Clark <robdclark@gmail.com> Acked-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-14 07:37:46 +0000