summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/meson
AgeCommit message (Collapse)AuthorFilesLines
2021-09-01Merge tag 'drm-next-2021-08-31-1' of git://anongit.freedesktop.org/drm/drmLinus Torvalds3-10/+4
Pull drm updates from Dave Airlie: "Highlights: - i915 has seen a lot of refactoring and uAPI cleanups due to a change in the upstream direction going forward This has all been audited with known userspace, but there may be some pitfalls that were missed. - i915 now uses common TTM to enable discrete memory on DG1/2 GPUs - i915 enables Jasper and Elkhart Lake by default and has preliminary XeHP/DG2 support - amdgpu adds support for Cyan Skillfish - lots of implicit fencing rules documented and fixed up in drivers - msm now uses the core scheduler - the irq midlayer has been removed for non-legacy drivers - the sysfb code now works on more than x86. Otherwise the usual smattering of stuff everywhere, panels, bridges, refactorings. Detailed summary: core: - extract i915 eDP backlight into core - DP aux bus support - drm_device.irq_enabled removed - port drivers to native irq interfaces - export gem shadow plane handling for vgem - print proper driver name in framebuffer registration - driver fixes for implicit fencing rules - ARM fixed rate compression modifier added - updated fb damage handling - rmfb ioctl logging/docs - drop drm_gem_object_put_locked - define DRM_FORMAT_MAX_PLANES - add gem fb vmap/vunmap helpers - add lockdep_assert(once) helpers - mark drm irq midlayer as legacy - use offset adjusted bo mapping conversion vgaarb: - cleanups fbdev: - extend efifb handling to all arches - div by 0 fixes for multiple drivers udmabuf: - add hugepage mapping support dma-buf: - non-dynamic exporter fixups - document implicit fencing rules amdgpu: - Initial Cyan Skillfish support - switch virtual DCE over to vkms based atomic - VCN/JPEG power down fixes - NAVI PCIE link handling fixes - AMD HDMI freesync fixes - Yellow Carp + Beige Goby fixes - Clockgating/S0ix/SMU/EEPROM fixes - embed hw fence in job - rework dma-resv handling - ensure eviction to system ram amdkfd: - uapi: SVM address range query added - sysfs leak fix - GPUVM TLB optimizations - vmfault/migration counters i915: - Enable JSL and EHL by default - preliminary XeHP/DG2 support - remove all CNL support (never shipped) - move to TTM for discrete memory support - allow mixed object mmap handling - GEM uAPI spring cleaning - add I915_MMAP_OBJECT_FIXED - reinstate ADL-P mmap ioctls - drop a bunch of unused by userspace features - disable and remove GPU relocations - revert some i915 misfeatures - major refactoring of GuC for Gen11+ - execbuffer object locking separate step - reject caching/set-domain on discrete - Enable pipe DMC loading on XE-LPD and ADL-P - add PSF GV point support - Refactor and fix DDI buffer translations - Clean up FBC CFB allocation code - Finish INTEL_GEN() and friends macro conversions nouveau: - add eDP backlight support - implicit fence fix msm: - a680/7c3 support - drm/scheduler conversion panfrost: - rework GPU reset virtio: - fix fencing for planes ast: - add detect support bochs: - move to tiny GPU driver vc4: - use hotplug irqs - HDMI codec support vmwgfx: - use internal vmware device headers ingenic: - demidlayering irq rcar-du: - shutdown fixes - convert to bridge connector helpers zynqmp-dsub: - misc fixes mgag200: - convert PLL handling to atomic mediatek: - MT8133 AAL support - gem mmap object support - MT8167 support etnaviv: - NXP Layerscape LS1028A SoC support - GEM mmap cleanups tegra: - new user API exynos: - missing unlock fix - build warning fix - use refcount_t" * tag 'drm-next-2021-08-31-1' of git://anongit.freedesktop.org/drm/drm: (1318 commits) drm/amd/display: Move AllowDRAMSelfRefreshOrDRAMClockChangeInVblank to bounding box drm/amd/display: Remove duplicate dml init drm/amd/display: Update bounding box states (v2) drm/amd/display: Update number of DCN3 clock states drm/amdgpu: disable GFX CGCG in aldebaran drm/amdgpu: Clear RAS interrupt status on aldebaran drm/amdgpu: Add support for RAS XGMI err query drm/amdkfd: Account for SH/SE count when setting up cu masks. drm/amdgpu: rename amdgpu_bo_get_preferred_pin_domain drm/amdgpu: drop redundant cancel_delayed_work_sync call drm/amdgpu: add missing cleanups for more ASICs on UVD/VCE suspend drm/amdgpu: add missing cleanups for Polaris12 UVD/VCE on suspend drm/amdkfd: map SVM range with correct access permission drm/amdkfd: check access permisson to restore retry fault drm/amdgpu: Update RAS XGMI Error Query drm/amdgpu: Add driver infrastructure for MCA RAS drm/amd/display: Add Logging for HDMI color depth information drm/amd/amdgpu: consolidate PSP TA init shared buf functions drm/amd/amdgpu: add name field back to ras_common_if drm/amdgpu: Fix build with missing pm_suspend_target_state module export ...
2021-08-10drm/meson: fix colour distortion from HDR set during vendor u-bootChristian Hewitt2-1/+11
Add support for the OSD1 HDR registers so meson DRM can handle the HDR properties set by Amlogic u-boot on G12A and newer devices which result in blue/green/pink colour distortion to display output. This takes the original patch submissions from Mathias [0] and [1] with corrections for formatting and the missing description and attribution needed for merge. [0] https://lore.kernel.org/linux-amlogic/59dfd7e6-fc91-3d61-04c4-94e078a3188c@baylibre.com/T/ [1] https://lore.kernel.org/linux-amlogic/CAOKfEHBx_fboUqkENEMd-OC-NSrf46nto+vDLgvgttzPe99kXg@mail.gmail.com/T/#u Fixes: 728883948b0d ("drm/meson: Add G12A Support for VIU setup") Suggested-by: Mathias Steiger <mathias.steiger@googlemail.com> Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Tested-by: Neil Armstrong <narmstrong@baylibre.com> Tested-by: Philip Milev <milev.philip@gmail.com> [narmsrong: adding missing space on second tested-by tag] Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210806094005.7136-1-christianshewitt@gmail.com
2021-07-21Merge tag 'drm-misc-next-2021-07-16' of ↵Dave Airlie3-10/+4
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for v5.15: UAPI Changes: Cross-subsystem Changes: - udmabuf: Add support for mapping hugepages - Add dma-buf stats to sysfs. - Assorted fixes to fbdev/omap2. - dma-buf: Document DMA_BUF_IOCTL_SYNC - Improve dma-buf non-dynamic exporter expectations better. - Add module parameters for dma-buf size and list limit. - Add HDMI codec support to vc4, to replace vc4's own codec. - Document dma-buf implicit fencing rules. - dma_resv_test_signaled test_all handling. Core Changes: - Extract i915's eDP backlight code into DRM helpers. - Assorted docbook updates. - Rework drm_dp_aux documentation. - Add support for the DP aux bus. - Shrink dma-fence-chain slightly. - Add alloc/free helpers for dma-fence-chain. - Assorted fixes to TTM., drm/of, bridge - drm_gem_plane_helper_prepare/cleanup_fb is now the default for gem drivers. - Small fix for scheduler completion. - Remove use of drm_device.irq_enabled. - Print the driver name to dmesg when registering framebuffer. - Export drm/gem's shadow plane handling, and use it in vkms. - Assorted small fixes. Driver Changes: - Add eDP backlight to nouveau. - Assorted fixes and cleanups to nouveau, panfrost, vmwgfx, anx7625, amdgpu, gma500, radeon, mgag200, vgem, vc4, vkms, omapdrm. - Add support for Samsung DB7430, Samsung ATNA33XC20, EDT ETMV570G2DHU, EDT ETM0350G0DH6, Innolux EJ030NA panels. - Fix some simple pannels missing bus_format and connector types. - Add mks-guest-stats instrumentation support to vmwgfx. - Merge i915-ttm topic branch. - Make s6e63m0 panel use Mipi-DBI helpers. - Add detect() supoprt for AST. - Use interrupts for hotplug on vc4. - vmwgfx is now moved to drm-misc-next, as sroland is no longer a maintainer for now. - vmwgfx now uses copies of vmware's internal device headers. - Slowly convert ti-sn65dsi83 over to atomic. - Rework amdgpu dma-resv handling. - Fix virtio fencing for planes. - Ensure amdgpu can always evict to SYSTEM. - Many drivers fixed for implicit fencing rules. - Set default prepare/cleanup fb for tiny, vram and simple helpers too. - Rework panfrost gpu reset and related serialization. - Update VKMS todo list. - Make bochs a tiny gpu driver, and use vram helper. - Use linux irq interfaces instead of drm_irq in some drivers. - Add support for Raspberry Pi Pico to GUD. Signed-off-by: Dave Airlie <airlied@redhat.com> # gpg: Signature made Fri 16 Jul 2021 21:06:04 AEST # gpg: using RSA key B97BD6A80CAC4981091AE547FE558C72A67013C3 # gpg: Good signature from "Maarten Lankhorst <maarten.lankhorst@linux.intel.com>" [expired] # gpg: aka "Maarten Lankhorst <maarten@debian.org>" [expired] # gpg: aka "Maarten Lankhorst <maarten.lankhorst@canonical.com>" [expired] # gpg: Note: This key has expired! # Primary key fingerprint: B97B D6A8 0CAC 4981 091A E547 FE55 8C72 A670 13C3 From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/444811c3-cbec-e9d5-9a6b-9632eda7962a@linux.intel.com
2021-07-08drm/meson: Convert to Linux IRQ interfacesThomas Zimmermann1-7/+3
Drop the DRM IRQ midlayer in favor of Linux IRQ interfaces. DRM's IRQ helpers are mostly useful for UMS drivers. Modern KMS drivers don't benefit from using it. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210706074545.8763-1-tzimmermann@suse.de
2021-07-01drm/aperture: Pass DRM driver structure instead of driver nameThomas Zimmermann1-1/+1
Print the name of the DRM driver when taking over fbdev devices. Makes the output to dmesg more consistent. Note that the driver name is only used for printing a string to the kernel log. No UAPI is affected by this change. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Nirmoy Das <nirmoy.das@amd.com> Acked-by: Chen-Yu Tsai <wens@csie.org> # sun4i Acked-by: Neil Armstrong <narmstrong@baylibre.com> # meson Link: https://patchwork.freedesktop.org/patch/msgid/20210629135833.22679-1-tzimmermann@suse.de
2021-06-24drm/<driver>: drm_gem_plane_helper_prepare_fb is now the defaultDaniel Vetter2-2/+0
No need to set it explicitly. Acked-by: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Paul Cercueil <paul@crapouillou.net> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Acked-by: Chun-Kuang Hu <chunkuang.hu@kernel.org> Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Acked-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Acked-by: Philippe Cornu <philippe.cornu@foss.st.com> Acked-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: Laurentiu Palcu <laurentiu.palcu@oss.nxp.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Pengutronix Kernel Team <kernel@pengutronix.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: NXP Linux Team <linux-imx@nxp.com> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: Paul Cercueil <paul@crapouillou.net> Cc: Chun-Kuang Hu <chunkuang.hu@kernel.org> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Kevin Hilman <khilman@baylibre.com> Cc: Jerome Brunet <jbrunet@baylibre.com> Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Cc: Marek Vasut <marex@denx.de> Cc: Stefan Agner <stefan@agner.ch> Cc: Sandy Huang <hjc@rock-chips.com> Cc: "Heiko Stübner" <heiko@sntech.de> Cc: Yannick Fertre <yannick.fertre@foss.st.com> Cc: Philippe Cornu <philippe.cornu@foss.st.com> Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Alexandre Torgue <alexandre.torgue@foss.st.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Chen-Yu Tsai <wens@csie.org> Cc: Jernej Skrabec <jernej.skrabec@gmail.com> Cc: Jyri Sarha <jyri.sarha@iki.fi> Cc: Tomi Valkeinen <tomba@kernel.org> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-mips@vger.kernel.org Cc: linux-mediatek@lists.infradead.org Cc: linux-amlogic@lists.infradead.org Cc: linux-rockchip@lists.infradead.org Cc: linux-stm32@st-md-mailman.stormreply.com Cc: linux-sunxi@lists.linux.dev Link: https://patchwork.freedesktop.org/patch/msgid/20210622165511.3169559-9-daniel.vetter@ffwll.ch
2021-06-23Backmerge tag 'v5.13-rc7' into drm-nextDave Airlie1-4/+5
Backmerge Linux 5.13-rc7 to make some pulls from later bases apply, and to bake in the conflicts so far.
2021-05-25drm/meson: fix shutdown crash when component not probedNeil Armstrong1-4/+5
When main component is not probed, by example when the dw-hdmi module is not loaded yet or in probe defer, the following crash appears on shutdown: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000038 ... pc : meson_drv_shutdown+0x24/0x50 lr : platform_drv_shutdown+0x20/0x30 ... Call trace: meson_drv_shutdown+0x24/0x50 platform_drv_shutdown+0x20/0x30 device_shutdown+0x158/0x360 kernel_restart_prepare+0x38/0x48 kernel_restart+0x18/0x68 __do_sys_reboot+0x224/0x250 __arm64_sys_reboot+0x24/0x30 ... Simply check if the priv struct has been allocated before using it. Fixes: fa0c16caf3d7 ("drm: meson_drv add shutdown function") Reported-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210430082744.3638743-1-narmstrong@baylibre.com
2021-04-20drm/meson: dw-hdmi: disable DW-HDMI CEC sub-driverNeil Armstrong1-0/+1
On the Amlogic SoCs, the DW-HDMI HW support is here but the DW-HDMI CEC signal is not connected to a physical pin, leading to confusion when the dw-hdmi cec controller can't communicate on the bus. Disable it to avoid exposing a non-functinal bus. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Link: https://patchwork.freedesktop.org/patch/msgid/20210416092737.1971876-3-narmstrong@baylibre.com
2021-04-14drm/aperture: Convert drivers to aperture interfacesThomas Zimmermann1-19/+8
Mass-convert all drivers from FB helpers to aperture interfaces. No functional changes besides checking for returned errno codes. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210412131043.5787-3-tzimmermann@suse.de
2021-03-19drm/meson: Fix few typoBhaskar Chowdhury1-1/+1
s/initialy/initially/ s/desined/designed/ Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210318110046.14830-1-unixbhaskar@gmail.com
2021-03-16Merge tag 'drm-misc-next-2021-03-03' of ↵Dave Airlie2-36/+46
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for 5.13: UAPI Changes: Cross-subsystem Changes: Core Changes: - %p4cc printk format modifier - atomic: introduce drm_crtc_commit_wait, rework atomic plane state helpers to take the drm_commit_state structure - dma-buf: heaps rework to return a struct dma_buf - simple-kms: Add plate state helpers - ttm: debugfs support, removal of sysfs Driver Changes: - Convert drivers to shadow plane helpers - arc: Move to drm/tiny - ast: cursor plane reworks - gma500: Remove TTM and medfield support - mxsfb: imx8mm support - panfrost: MMU IRQ handling rework - qxl: rework to better handle resources deallocation, locking - sun4i: Add alpha properties for UI and VI layers - vc4: RPi4 CEC support - vmwgfx: doc cleanup Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20210303100600.dgnkadonzuvfnu22@gilmour
2021-03-11drm: meson_drv add shutdown functionArtem Lapkin1-0/+11
Problem: random stucks on reboot stage about 1/20 stuck/reboots // debug kernel log [ 4.496660] reboot: kernel restart prepare CMD:(null) [ 4.498114] meson_ee_pwrc c883c000.system-controller:power-controller: shutdown begin [ 4.503949] meson_ee_pwrc c883c000.system-controller:power-controller: shutdown domain 0:VPU... ...STUCK... Solution: add shutdown function to meson_drm driver // debug kernel log [ 5.231896] reboot: kernel restart prepare CMD:(null) [ 5.246135] [drm:meson_drv_shutdown] ... [ 5.259271] meson_ee_pwrc c883c000.system-controller:power-controller: shutdown begin [ 5.274688] meson_ee_pwrc c883c000.system-controller:power-controller: shutdown domain 0:VPU... [ 5.338331] reboot: Restarting system [ 5.358293] psci: PSCI_0_2_FN_SYSTEM_RESET reboot_mode:0 cmd:(null) bl31 reboot reason: 0xd bl31 reboot reason: 0x0 system cmd 1. ...REBOOT... Tested: on VIM1 VIM2 VIM3 VIM3L khadas sbcs - 1000+ successful reboots and Odroid boards, WeTek Play2 (GXBB) Fixes: bbbe775ec5b5 ("drm: Add support for Amlogic Meson Graphic Controller") Signed-off-by: Artem Lapkin <art@khadas.com> Tested-by: Christian Hewitt <christianshewitt@gmail.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210302042202.3728113-1-art@khadas.com Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2021-02-25drm: Use state helper instead of the plane state pointerMaxime Ripard2-2/+4
Many drivers reference the plane->state pointer in order to get the current plane state in their atomic_update or atomic_disable hooks, which would be the new plane state in the global atomic state since _swap_state happened when those hooks are run. Use the drm_atomic_get_new_plane_state helper to get that state to make it more obvious. This was made using the coccinelle script below: @ plane_atomic_func @ identifier helpers; identifier func; @@ ( static const struct drm_plane_helper_funcs helpers = { ..., .atomic_disable = func, ..., }; | static const struct drm_plane_helper_funcs helpers = { ..., .atomic_update = func, ..., }; ) @ adds_new_state @ identifier plane_atomic_func.func; identifier plane, state; identifier new_state; @@ func(struct drm_plane *plane, struct drm_atomic_state *state) { ... - struct drm_plane_state *new_state = plane->state; + struct drm_plane_state *new_state = drm_atomic_get_new_plane_state(state, plane); ... } @ include depends on adds_new_state @ @@ #include <drm/drm_atomic.h> @ no_include depends on !include && adds_new_state @ @@ + #include <drm/drm_atomic.h> #include <drm/...> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://lore.kernel.org/r/20210219120032.260676-1-maxime@cerno.tech
2021-02-25drm/atomic: Pass the full state to planes atomic disable and updateMaxime Ripard2-4/+4
The current atomic helpers have either their object state being passed as an argument or the full atomic state. The former is the pattern that was done at first, before switching to the latter for new hooks or when it was needed. Let's convert the remaining helpers to provide a consistent interface, this time with the planes atomic_update and atomic_disable. The conversion was done using the coccinelle script below, built tested on all the drivers. @@ identifier plane, plane_state; symbol state; @@ struct drm_plane_helper_funcs { ... void (*atomic_update)(struct drm_plane *plane, - struct drm_plane_state *plane_state); + struct drm_atomic_state *state); ... } @@ identifier plane, plane_state; symbol state; @@ struct drm_plane_helper_funcs { ... void (*atomic_disable)(struct drm_plane *plane, - struct drm_plane_state *plane_state); + struct drm_atomic_state *state); ... } @ plane_atomic_func @ identifier helpers; identifier func; @@ ( static const struct drm_plane_helper_funcs helpers = { ..., .atomic_update = func, ..., }; | static const struct drm_plane_helper_funcs helpers = { ..., .atomic_disable = func, ..., }; ) @@ struct drm_plane_helper_funcs *FUNCS; identifier f; identifier crtc_state; identifier plane, plane_state, state; expression e; @@ f(struct drm_crtc_state *crtc_state) { ... struct drm_atomic_state *state = e; <+... ( - FUNCS->atomic_disable(plane, plane_state) + FUNCS->atomic_disable(plane, state) | - FUNCS->atomic_update(plane, plane_state) + FUNCS->atomic_update(plane, state) ) ...+> } @@ identifier plane_atomic_func.func; identifier plane; symbol state; @@ func(struct drm_plane *plane, - struct drm_plane_state *state) + struct drm_plane_state *old_plane_state) { <... - state + old_plane_state ...> } @ ignores_old_state @ identifier plane_atomic_func.func; identifier plane, old_state; @@ func(struct drm_plane *plane, struct drm_plane_state *old_state) { ... when != old_state } @ adds_old_state depends on plane_atomic_func && !ignores_old_state @ identifier plane_atomic_func.func; identifier plane, plane_state; @@ func(struct drm_plane *plane, struct drm_plane_state *plane_state) { + struct drm_plane_state *plane_state = drm_atomic_get_old_plane_state(state, plane); ... } @ depends on plane_atomic_func @ identifier plane_atomic_func.func; identifier plane, plane_state; @@ func(struct drm_plane *plane, - struct drm_plane_state *plane_state + struct drm_atomic_state *state ) { ... } @ include depends on adds_old_state @ @@ #include <drm/drm_atomic.h> @ no_include depends on !include && adds_old_state @ @@ + #include <drm/drm_atomic.h> #include <drm/...> @@ identifier plane_atomic_func.func; identifier plane, state; identifier plane_state; @@ func(struct drm_plane *plane, struct drm_atomic_state *state) { ... struct drm_plane_state *plane_state = drm_atomic_get_old_plane_state(state, plane); <+... - plane_state->state + state ...+> } Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20210219120032.260676-9-maxime@cerno.tech
2021-02-24drm: Rename plane->state variables in atomic update and disableMaxime Ripard2-18/+18
Some drivers are storing the plane->state pointer in atomic_update and atomic_disable in a variable simply called state, while the state passed as an argument is called old_state. In order to ease subsequent reworks and to avoid confusing or inconsistent names, let's rename those variables to new_state. This was done using the following coccinelle script, plus some manual changes for mtk and tegra. @ plane_atomic_func @ identifier helpers; identifier func; @@ ( static const struct drm_plane_helper_funcs helpers = { ..., .atomic_disable = func, ..., }; | static const struct drm_plane_helper_funcs helpers = { ..., .atomic_update = func, ..., }; ) @ moves_new_state_old_state @ identifier plane_atomic_func.func; identifier plane; symbol old_state; symbol state; @@ func(struct drm_plane *plane, struct drm_plane_state *old_state) { ... - struct drm_plane_state *state = plane->state; + struct drm_plane_state *new_state = plane->state; ... } @ depends on moves_new_state_old_state @ identifier plane_atomic_func.func; identifier plane; identifier old_state; symbol state; @@ func(struct drm_plane *plane, struct drm_plane_state *old_state) { <... - state + new_state ...> } @ moves_new_state_oldstate @ identifier plane_atomic_func.func; identifier plane; symbol oldstate; symbol state; @@ func(struct drm_plane *plane, struct drm_plane_state *oldstate) { ... - struct drm_plane_state *state = plane->state; + struct drm_plane_state *newstate = plane->state; ... } @ depends on moves_new_state_oldstate @ identifier plane_atomic_func.func; identifier plane; identifier old_state; symbol state; @@ func(struct drm_plane *plane, struct drm_plane_state *old_state) { <... - state + newstate ...> } @ moves_new_state_old_pstate @ identifier plane_atomic_func.func; identifier plane; symbol old_pstate; symbol state; @@ func(struct drm_plane *plane, struct drm_plane_state *old_pstate) { ... - struct drm_plane_state *state = plane->state; + struct drm_plane_state *new_pstate = plane->state; ... } @ depends on moves_new_state_old_pstate @ identifier plane_atomic_func.func; identifier plane; identifier old_pstate; symbol state; @@ func(struct drm_plane *plane, struct drm_plane_state *old_pstate) { <... - state + new_pstate ...> } Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20210219120032.260676-8-maxime@cerno.tech
2021-02-24drm: Use the state pointer directly in planes atomic_checkMaxime Ripard2-2/+2
Now that atomic_check takes the global atomic state as a parameter, we don't need to go through the pointer in the plane state. This was done using the following coccinelle script: @ plane_atomic_func @ identifier helpers; identifier func; @@ static struct drm_plane_helper_funcs helpers = { ..., .atomic_check = func, ..., }; @@ identifier plane_atomic_func.func; identifier plane, state; identifier plane_state; @@ func(struct drm_plane *plane, struct drm_atomic_state *state) { ... - struct drm_plane_state *plane_state = drm_atomic_get_new_plane_state(state, plane); <... when != plane_state - plane_state->state + state ...> } @@ identifier plane_atomic_func.func; identifier plane, state; identifier plane_state; @@ func(struct drm_plane *plane, struct drm_atomic_state *state) { ... struct drm_plane_state *plane_state = drm_atomic_get_new_plane_state(state, plane); <... - plane_state->state + state ...> } Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20210219120032.260676-5-maxime@cerno.tech
2021-02-24drm/atomic: Pass the full state to planes atomic_checkMaxime Ripard2-2/+6
The current atomic helpers have either their object state being passed as an argument or the full atomic state. The former is the pattern that was done at first, before switching to the latter for new hooks or when it was needed. Let's convert all the remaining helpers to provide a consistent interface, starting with the planes atomic_check. The conversion was done using the coccinelle script below plus some manual changes for vmwgfx, built tested on all the drivers. @@ identifier plane, plane_state; symbol state; @@ struct drm_plane_helper_funcs { ... int (*atomic_check)(struct drm_plane *plane, - struct drm_plane_state *plane_state); + struct drm_atomic_state *state); ... } @ plane_atomic_func @ identifier helpers; identifier func; @@ static const struct drm_plane_helper_funcs helpers = { ..., .atomic_check = func, ..., }; @@ struct drm_plane_helper_funcs *FUNCS; identifier f; identifier dev; identifier plane, plane_state, state; @@ f(struct drm_device *dev, struct drm_atomic_state *state) { <+... - FUNCS->atomic_check(plane, plane_state) + FUNCS->atomic_check(plane, state) ...+> } @ ignores_new_state @ identifier plane_atomic_func.func; identifier plane, new_plane_state; @@ func(struct drm_plane *plane, struct drm_plane_state *new_plane_state) { ... when != new_plane_state } @ adds_new_state depends on plane_atomic_func && !ignores_new_state @ identifier plane_atomic_func.func; identifier plane, new_plane_state; @@ func(struct drm_plane *plane, struct drm_plane_state *new_plane_state) { + struct drm_plane_state *new_plane_state = drm_atomic_get_new_plane_state(state, plane); ... } @ depends on plane_atomic_func @ identifier plane_atomic_func.func; identifier plane, new_plane_state; @@ func(struct drm_plane *plane, - struct drm_plane_state *new_plane_state + struct drm_atomic_state *state ) { ... } @ include depends on adds_new_state @ @@ #include <drm/drm_atomic.h> @ no_include depends on !include && adds_new_state @ @@ + #include <drm/drm_atomic.h> #include <drm/...> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20210219120032.260676-4-maxime@cerno.tech
2021-02-24drm: Rename plane atomic_check state namesMaxime Ripard2-8/+12
Most drivers call the argument to the plane atomic_check hook simply state, which is going to conflict with the global atomic state in a later rework. Let's rename it to new_plane_state (or new_state depending on the convention used in the driver). This was done using the coccinelle script below, and built tested: @ plane_atomic_func @ identifier helpers; identifier func; @@ static const struct drm_plane_helper_funcs helpers = { .atomic_check = func, }; @ has_old_state @ identifier plane_atomic_func.func; identifier plane; expression e; symbol old_state; symbol state; @@ func(struct drm_plane *plane, struct drm_plane_state *state) { ... struct drm_plane_state *old_state = e; ... } @ depends on has_old_state @ identifier plane_atomic_func.func; identifier plane; symbol old_state; @@ func(struct drm_plane *plane, - struct drm_plane_state *state + struct drm_plane_state *new_state ) { <+... - state + new_state ...+> } @ has_state @ identifier plane_atomic_func.func; identifier plane; symbol state; @@ func(struct drm_plane *plane, struct drm_plane_state *state) { ... } @ depends on has_state @ identifier plane_atomic_func.func; identifier plane; symbol old_state; @@ func(struct drm_plane *plane, - struct drm_plane_state *state + struct drm_plane_state *new_plane_state ) { <+... - state + new_plane_state ...+> } Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20210219120032.260676-2-maxime@cerno.tech
2021-02-23drm/gem: Move drm_gem_fb_prepare_fb() to GEM atomic helpersThomas Zimmermann2-6/+6
The function drm_gem_fb_prepare_fb() is a helper for atomic modesetting, but currently located next to framebuffer helpers. Move it to GEM atomic helpers, rename it slightly and adopt the drivers. Same for the rsp simple-pipe helper. Compile-tested with x86-64, aarch64 and arm. The patch is fairly large, but there are no functional changes. v3: * remove out-comented line in drm_gem_framebuffer_helper.h (Maxime) v2: * rename to drm_gem_plane_helper_prepare_fb() (Daniel) * add tutorial-style documentation Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Maxime Ripard <mripard@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210222141756.7864-1-tzimmermann@suse.de
2020-11-20drm/meson: dw-hdmi: Enable the iahb clock early enoughMarc Zyngier1-2/+6
Instead of moving meson_dw_hdmi_init() around which breaks existing platform, let's enable the clock meson_dw_hdmi_init() depends on. This means we don't have to worry about this clock being enabled or not, depending on the boot-loader features. Fixes: b33340e33acd ("drm/meson: dw-hdmi: Ensure that clocks are enabled before touching the TOP registers") Reported-by: "kernelci.org bot" <bot@kernelci.org> Signed-off-by: Marc Zyngier <maz@kernel.org> Tested-by: Guillaume Tucker <guillaume.tucker@collabora.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> [narmstrong: changed reported by to kernelci.org bot] Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201120094205.525228-3-maz@kernel.org
2020-11-20drm/meson: dw-hdmi: Disable clocks on driver teardownMarc Zyngier1-14/+29
The HDMI driver request clocks early, but never disable them, leaving the clocks on even when the driver is removed. Fix it by slightly refactoring the clock code, and register a devm action that will eventually disable/unprepare the enabled clocks. Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201120094205.525228-2-maz@kernel.org
2020-11-17drm/meson/meson_vclk: Make two local functions staticLee Jones1-4/+4
Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/meson/meson_vclk.c:134:6: warning: no previous prototype for ‘meson_vid_pll_set’ [-Wmissing-prototypes] drivers/gpu/drm/meson/meson_vclk.c:490:6: warning: no previous prototype for ‘meson_hdmi_pll_set_params’ [-Wmissing-prototypes] Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Kevin Hilman <khilman@baylibre.com> Cc: Jerome Brunet <jbrunet@baylibre.com> Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Cc: dri-devel@lists.freedesktop.org Cc: linux-amlogic@lists.infradead.org Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20201116174112.1833368-15-lee.jones@linaro.org
2020-11-17drm/meson/meson_venc: Make local function 'meson_venc_hdmi_get_dmt_vmode' staticLee Jones1-2/+2
Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/meson/meson_venc.c:893:6: warning: no previous prototype for ‘meson_venc_hdmi_get_dmt_vmode’ [-Wmissing-prototypes] Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Kevin Hilman <khilman@baylibre.com> Cc: Jerome Brunet <jbrunet@baylibre.com> Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Cc: dri-devel@lists.freedesktop.org Cc: linux-amlogic@lists.infradead.org Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20201116174112.1833368-14-lee.jones@linaro.org
2020-11-17drm/meson: dw-hdmi: Ensure that clocks are enabled before touching the TOP ↵Marc Zyngier1-2/+2
registers Removing the meson-dw-hdmi module and re-inserting it results in a hang as the driver writes to HDMITX_TOP_SW_RESET. Similar effects can be seen when booting with mainline u-boot and using the u-boot provided DT (which is highly desirable). The reason for the hang seem to be that the clocks are not always enabled by the time we enter meson_dw_hdmi_init(). Moving this call *after* dw_hdmi_probe() ensures that the clocks are enabled. Fixes: 1374b8375c2e ("drm/meson: dw_hdmi: add resume/suspend hooks") Signed-off-by: Marc Zyngier <maz@kernel.org> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201116200744.495826-5-maz@kernel.org
2020-11-17drm/meson: dw-hdmi: Register a callback to disable the regulatorMarc Zyngier1-0/+9
Removing the meson-dw-hdmi module results in the following splat: i[ 43.340509] WARNING: CPU: 0 PID: 572 at drivers/regulator/core.c:2125 _regulator_put.part.0+0x16c/0x174 [...] [ 43.454870] CPU: 0 PID: 572 Comm: modprobe Tainted: G W E 5.10.0-rc4-00049-gd274813a4de3-dirty #2147 [ 43.465042] Hardware name: , BIOS 2021.01-rc2-00012-gde865f7ee1 11/16/2020 [ 43.471945] pstate: 80400009 (Nzcv daif +PAN -UAO -TCO BTYPE=--) [ 43.477896] pc : _regulator_put.part.0+0x16c/0x174 [ 43.482638] lr : regulator_put+0x44/0x60 [...] [ 43.568715] Call trace: [ 43.571132] _regulator_put.part.0+0x16c/0x174 [ 43.575529] regulator_put+0x44/0x60 [ 43.579067] devm_regulator_release+0x20/0x2c [ 43.583380] release_nodes+0x1c8/0x2b4 [ 43.587087] devres_release_all+0x44/0x6c [ 43.591056] __device_release_driver+0x1a0/0x23c [ 43.595626] driver_detach+0xcc/0x160 [ 43.599249] bus_remove_driver+0x68/0xe0 [ 43.603130] driver_unregister+0x3c/0x6c [ 43.607011] platform_driver_unregister+0x20/0x2c [ 43.611678] meson_dw_hdmi_platform_driver_exit+0x18/0x4a8 [meson_dw_hdmi] [ 43.618485] __arm64_sys_delete_module+0x1bc/0x294 as the HDMI regulator is still enabled on release. In order to address this, register a callback that will deal with the disabling when the driver is unbound, solving the problem. Fixes: 161a803fe32d ("drm/meson: dw_hdmi: Add support for an optional external 5V regulator") Signed-off-by: Marc Zyngier <maz@kernel.org> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201116200744.495826-4-maz@kernel.org
2020-11-17drm/meson: Unbind all connectors on module removalMarc Zyngier1-1/+3
Removing the meson DRM module results in the following splats: [ 42.689228] WARNING: CPU: 0 PID: 572 at drivers/gpu/drm/drm_irq.c:192 drm_irq_uninstall+0x130/0x160 [drm] [...] [ 42.812820] Hardware name: , BIOS 2021.01-rc2-00012-gde865f7ee1 11/16/2020 [ 42.819723] pstate: 80400089 (Nzcv daIf +PAN -UAO -TCO BTYPE=--) [ 42.825737] pc : drm_irq_uninstall+0x130/0x160 [drm] [ 42.830647] lr : drm_irq_uninstall+0xc4/0x160 [drm] [...] [ 42.917614] Call trace: [ 42.920086] drm_irq_uninstall+0x130/0x160 [drm] [ 42.924612] meson_drv_unbind+0x68/0xa4 [meson_drm] [ 42.929436] component_del+0xc0/0x180 [ 42.933058] meson_dw_hdmi_remove+0x28/0x40 [meson_dw_hdmi] [ 42.938576] platform_drv_remove+0x38/0x60 [ 42.942628] __device_release_driver+0x190/0x23c [ 42.947198] driver_detach+0xcc/0x160 [ 42.950822] bus_remove_driver+0x68/0xe0 [ 42.954702] driver_unregister+0x3c/0x6c [ 42.958583] platform_driver_unregister+0x20/0x2c [ 42.963243] meson_dw_hdmi_platform_driver_exit+0x18/0x4a8 [meson_dw_hdmi] [ 42.970057] __arm64_sys_delete_module+0x1bc/0x294 [ 42.974801] el0_svc_common.constprop.0+0x80/0x240 [ 42.979542] do_el0_svc+0x30/0xa0 [ 42.982821] el0_svc+0x18/0x50 [ 42.985839] el0_sync_handler+0x198/0x404 [ 42.989806] el0_sync+0x158/0x180 immediatelly followed by [ 43.002296] WARNING: CPU: 0 PID: 572 at drivers/gpu/drm/drm_mode_config.c:504 drm_mode_config_cleanup+0x2a8/0x304 [drm] [...] [ 43.128150] Hardware name: , BIOS 2021.01-rc2-00012-gde865f7ee1 11/16/2020 [ 43.135052] pstate: 80400009 (Nzcv daif +PAN -UAO -TCO BTYPE=--) [ 43.141062] pc : drm_mode_config_cleanup+0x2a8/0x304 [drm] [ 43.146492] lr : drm_mode_config_cleanup+0xac/0x304 [drm] [...] [ 43.233979] Call trace: [ 43.236451] drm_mode_config_cleanup+0x2a8/0x304 [drm] [ 43.241538] drm_mode_config_init_release+0x1c/0x2c [drm] [ 43.246886] drm_managed_release+0xa8/0x120 [drm] [ 43.251543] drm_dev_put+0x94/0xc0 [drm] [ 43.255380] meson_drv_unbind+0x78/0xa4 [meson_drm] [ 43.260204] component_del+0xc0/0x180 [ 43.263829] meson_dw_hdmi_remove+0x28/0x40 [meson_dw_hdmi] [ 43.269344] platform_drv_remove+0x38/0x60 [ 43.273398] __device_release_driver+0x190/0x23c [ 43.277967] driver_detach+0xcc/0x160 [ 43.281590] bus_remove_driver+0x68/0xe0 [ 43.285471] driver_unregister+0x3c/0x6c [ 43.289352] platform_driver_unregister+0x20/0x2c [ 43.294011] meson_dw_hdmi_platform_driver_exit+0x18/0x4a8 [meson_dw_hdmi] [ 43.300826] __arm64_sys_delete_module+0x1bc/0x294 [ 43.305570] el0_svc_common.constprop.0+0x80/0x240 [ 43.310312] do_el0_svc+0x30/0xa0 [ 43.313590] el0_svc+0x18/0x50 [ 43.316608] el0_sync_handler+0x198/0x404 [ 43.320574] el0_sync+0x158/0x180 [ 43.323852] ---[ end trace d796a3072dab01da ]--- [ 43.328561] [drm:drm_mode_config_cleanup [drm]] *ERROR* connector HDMI-A-1 leaked! both triggered by the fact that the HDMI subsystem is still active, and the DRM removal doesn't result in the connectors being torn down. Call drm_atomic_helper_shutdown() and component_unbind_all() to safely tear the module down. Fixes: 2d8f92897ad8 ("drm/meson: Uninstall IRQ handler") Signed-off-by: Marc Zyngier <maz@kernel.org> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201116200744.495826-3-maz@kernel.org
2020-11-17drm/meson: Free RDMA resources after tearing down DRMMarc Zyngier1-5/+5
Removing the meson DRM module results in the following splat: [ 2179.451346] Hardware name: , BIOS 2021.01-rc2-00012-gde865f7ee1 11/16/2020 [ 2179.458316] Workqueue: events drm_mode_rmfb_work_fn [drm] [ 2179.463597] pstate: 80c00009 (Nzcv daif +PAN +UAO -TCO BTYPE=--) [ 2179.469558] pc : meson_rdma_writel_sync+0x44/0xb0 [meson_drm] [ 2179.475243] lr : meson_g12a_afbcd_reset+0x34/0x60 [meson_drm] [ 2179.480930] sp : ffffffc01212bb70 [ 2179.484207] x29: ffffffc01212bb70 x28: ffffff8044f66f00 [ 2179.489469] x27: ffffff8045b13800 x26: 0000000000000001 [ 2179.494730] x25: 0000000000000000 x24: 0000000000000001 [ 2179.499991] x23: 0000000000000000 x22: 0000000000000000 [ 2179.505252] x21: 0000000000280000 x20: 0000000000001a01 [ 2179.510513] x19: ffffff8046029480 x18: 0000000000000000 [ 2179.515775] x17: 0000000000000000 x16: 0000000000000000 [ 2179.521036] x15: 0000000000000000 x14: 0000000000000000 [ 2179.526297] x13: 0040000000000326 x12: 0309030303260300 [ 2179.531558] x11: 03000000054004a0 x10: 0418054004000400 [ 2179.536820] x9 : ffffffc008fe4914 x8 : ffffff8040a1adc0 [ 2179.542081] x7 : 0000000000000000 x6 : ffffff8042aa0080 [ 2179.547342] x5 : ffffff8044f66f00 x4 : ffffffc008fe5bc8 [ 2179.552603] x3 : 0000000000010101 x2 : 0000000000000001 [ 2179.557865] x1 : 0000000000000000 x0 : 0000000000000000 [ 2179.563127] Call trace: [ 2179.565548] meson_rdma_writel_sync+0x44/0xb0 [meson_drm] [ 2179.570894] meson_g12a_afbcd_reset+0x34/0x60 [meson_drm] [ 2179.576241] meson_plane_atomic_disable+0x38/0xb0 [meson_drm] [ 2179.581966] drm_atomic_helper_commit_planes+0x1e0/0x21c [drm_kms_helper] [ 2179.588684] drm_atomic_helper_commit_tail_rpm+0x68/0xb0 [drm_kms_helper] [ 2179.595410] commit_tail+0xac/0x190 [drm_kms_helper] [ 2179.600326] drm_atomic_helper_commit+0x16c/0x390 [drm_kms_helper] [ 2179.606484] drm_atomic_commit+0x58/0x70 [drm] [ 2179.610880] drm_framebuffer_remove+0x398/0x434 [drm] [ 2179.615881] drm_mode_rmfb_work_fn+0x68/0x8c [drm] [ 2179.620575] process_one_work+0x1cc/0x49c [ 2179.624538] worker_thread+0x200/0x444 [ 2179.628246] kthread+0x14c/0x160 [ 2179.631439] ret_from_fork+0x10/0x38 caused by the fact that the RDMA buffer has already been freed, resulting in meson_rdma_writel_sync() getting a NULL pointer. Move the afbcd reset and meson_rdma_free calls after the DRM unregistration is complete so that the teardown can safely complete. Fixes: d1b5e41e13a7 ("drm/meson: Add AFBCD module driver") Signed-off-by: Marc Zyngier <maz@kernel.org> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201116200744.495826-2-maz@kernel.org
2020-11-06drm/<drivers>: Constify struct drm_driverDaniel Vetter1-1/+1
Only the following drivers aren't converted: - amdgpu, because of the driver_feature mangling due to virt support. Subsequent patch will address this. - nouveau, because DRIVER_ATOMIC uapi is still not the default on the platforms where it's supported (i.e. again driver_feature mangling) - vc4, again because of driver_feature mangling - qxl, because the ioctl table is somewhere else and moving that is maybe a bit too much, hence the num_ioctls assignment prevents a const driver structure. - arcpgu, because that is stuck behind a pending tiny-fication series from me. - legacy drivers, because legacy requires non-const drm_driver. Note that for armada I also went ahead and made the ioctl array const. Only cc'ing the driver people who've not been converted (everyone else is way too much). v2: Fix one misplaced const static, should be static const (0day) v3: - Improve commit message (Sam) Acked-by: Sam Ravnborg <sam@ravnborg.org> Cc: kernel test robot <lkp@intel.com> Acked-by: Maxime Ripard <mripard@kernel.org> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Dave Airlie <airlied@redhat.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: virtualization@lists.linux-foundation.org Cc: Harry Wentland <harry.wentland@amd.com> Cc: Leo Li <sunpeng.li@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Eric Anholt <eric@anholt.net> Cc: Maxime Ripard <mripard@kernel.org> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: nouveau@lists.freedesktop.org Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201104100425.1922351-5-daniel.vetter@ffwll.ch
2020-11-02drm/atomic: Pass the full state to CRTC atomic begin and flushMaxime Ripard1-2/+2
The current atomic helpers have either their object state being passed as an argument or the full atomic state. The former is the pattern that was done at first, before switching to the latter for new hooks or when it was needed. Let's start convert all the remaining helpers to provide a consistent interface, starting with the CRTC's atomic_begin and atomic_flush. The conversion was done using the coccinelle script below, built tested on all the drivers and actually tested on vc4. virtual report @@ struct drm_crtc_helper_funcs *FUNCS; identifier old_crtc_state, old_state; identifier crtc; identifier f; @@ f(struct drm_crtc_state *old_crtc_state) { ... struct drm_atomic_state *old_state = old_crtc_state->state; <... - FUNCS->atomic_begin(crtc, old_crtc_state); + FUNCS->atomic_begin(crtc, old_state); ...> } @@ struct drm_crtc_helper_funcs *FUNCS; identifier old_crtc_state, old_state; identifier crtc; identifier f; @@ f(struct drm_crtc_state *old_crtc_state) { ... struct drm_atomic_state *old_state = old_crtc_state->state; <... - FUNCS->atomic_flush(crtc, old_crtc_state); + FUNCS->atomic_flush(crtc, old_state); ...> } @@ struct drm_crtc_helper_funcs *FUNCS; struct drm_crtc *crtc; struct drm_crtc_state *crtc_state; identifier dev, state; identifier f; @@ f(struct drm_device *dev, struct drm_atomic_state *state, ...) { <... - FUNCS->atomic_begin(crtc, crtc_state); + FUNCS->atomic_begin(crtc, state); ...> } @@ struct drm_crtc_helper_funcs *FUNCS; struct drm_crtc *crtc; struct drm_crtc_state *crtc_state; identifier dev, state; identifier f; @@ f(struct drm_device *dev, struct drm_atomic_state *state, ...) { <... - FUNCS->atomic_flush(crtc, crtc_state); + FUNCS->atomic_flush(crtc, state); ...> } @@ identifier crtc, old_state; @@ struct drm_crtc_helper_funcs { ... - void (*atomic_begin)(struct drm_crtc *crtc, struct drm_crtc_state *old_state); + void (*atomic_begin)(struct drm_crtc *crtc, struct drm_atomic_state *state); ... - void (*atomic_flush)(struct drm_crtc *crtc, struct drm_crtc_state *old_state); + void (*atomic_flush)(struct drm_crtc *crtc, struct drm_atomic_state *state); ... } @ crtc_atomic_func @ identifier helpers; identifier func; @@ ( static struct drm_crtc_helper_funcs helpers = { ..., .atomic_begin = func, ..., }; | static struct drm_crtc_helper_funcs helpers = { ..., .atomic_flush = func, ..., }; ) @ ignores_old_state @ identifier crtc_atomic_func.func; identifier crtc, old_state; @@ void func(struct drm_crtc *crtc, struct drm_crtc_state *old_state) { ... when != old_state } @ adds_old_state depends on crtc_atomic_func && !ignores_old_state @ identifier crtc_atomic_func.func; identifier crtc, old_state; @@ void func(struct drm_crtc *crtc, struct drm_crtc_state *old_state) { + struct drm_crtc_state *old_state = drm_atomic_get_old_crtc_state(state, crtc); ... } @ depends on crtc_atomic_func @ identifier crtc_atomic_func.func; expression E; type T; @@ void func(...) { ... - T state = E; + T crtc_state = E; <+... - state + crtc_state ...+> } @ depends on crtc_atomic_func @ identifier crtc_atomic_func.func; type T; @@ void func(...) { ... - T state; + T crtc_state; <+... - state + crtc_state ...+> } @@ identifier old_state; identifier crtc; @@ void vc4_hvs_atomic_flush(struct drm_crtc *crtc, - struct drm_crtc_state *old_state + struct drm_atomic_state *state ) { + struct drm_crtc_state *old_state = drm_atomic_get_old_crtc_state(state, crtc); ... } @@ identifier old_state; identifier crtc; @@ void vc4_hvs_atomic_flush(struct drm_crtc *crtc, - struct drm_crtc_state *old_state + struct drm_atomic_state *state ); @@ identifier old_state; identifier crtc; @@ void vmw_du_crtc_atomic_begin(struct drm_crtc *crtc, - struct drm_crtc_state *old_state + struct drm_atomic_state *state ) { ... } @@ identifier old_state; identifier crtc; @@ void vmw_du_crtc_atomic_begin(struct drm_crtc *crtc, - struct drm_crtc_state *old_state + struct drm_atomic_state *state ); @@ identifier old_state; identifier crtc; @@ void vmw_du_crtc_atomic_flush(struct drm_crtc *crtc, - struct drm_crtc_state *old_state + struct drm_atomic_state *state ) { ... } @@ identifier old_state; identifier crtc; @@ void vmw_du_crtc_atomic_flush(struct drm_crtc *crtc, - struct drm_crtc_state *old_state + struct drm_atomic_state *state ); @ depends on crtc_atomic_func @ identifier crtc_atomic_func.func; identifier old_state; identifier crtc; @@ void func(struct drm_crtc *crtc, - struct drm_crtc_state *old_state + struct drm_atomic_state *state ) { ... } @ include depends on adds_old_state @ @@ #include <drm/drm_atomic.h> @ no_include depends on !include && adds_old_state @ @@ + #include <drm/drm_atomic.h> #include <drm/...> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20201028123222.1732139-2-maxime@cerno.tech
2020-10-09drm/atomic: Pass the full state to CRTC atomic enable/disableMaxime Ripard1-4/+4
If the CRTC driver ever needs to access the full DRM state, it can't do so at atomic_enable / atomic_disable time since drm_atomic_helper_swap_state will have cleared the pointer from the struct drm_crtc_state to the struct drm_atomic_state before calling those hooks. In order to allow that, let's pass the full DRM state to atomic_enable and atomic_disable. The conversion was done using the coccinelle script below, built tested on all the drivers and actually tested on vc4. virtual report @@ struct drm_crtc_helper_funcs *FUNCS; identifier dev, state; identifier crtc, crtc_state; @@ disable_outputs(struct drm_device *dev, struct drm_atomic_state *state) { <... - FUNCS->atomic_disable(crtc, crtc_state); + FUNCS->atomic_disable(crtc, state); ...> } @@ struct drm_crtc_helper_funcs *FUNCS; identifier dev, state; identifier crtc, crtc_state; @@ drm_atomic_helper_commit_modeset_enables(struct drm_device *dev, struct drm_atomic_state *state) { <... - FUNCS->atomic_enable(crtc, crtc_state); + FUNCS->atomic_enable(crtc, state); ...> } @@ identifier crtc, old_state; @@ struct drm_crtc_helper_funcs { ... - void (*atomic_enable)(struct drm_crtc *crtc, struct drm_crtc_state *old_state); + void (*atomic_enable)(struct drm_crtc *crtc, struct drm_atomic_state *state); ... - void (*atomic_disable)(struct drm_crtc *crtc, struct drm_crtc_state *old_state); + void (*atomic_disable)(struct drm_crtc *crtc, struct drm_atomic_state *state); ... } @ crtc_atomic_func @ identifier helpers; identifier func; @@ ( static struct drm_crtc_helper_funcs helpers = { ..., .atomic_enable = func, ..., }; | static struct drm_crtc_helper_funcs helpers = { ..., .atomic_disable = func, ..., }; ) @ ignores_old_state @ identifier crtc_atomic_func.func; identifier crtc, old_state; @@ void func(struct drm_crtc *crtc, struct drm_crtc_state *old_state) { ... when != old_state } @ adds_old_state depends on crtc_atomic_func && !ignores_old_state @ identifier crtc_atomic_func.func; identifier crtc, old_state; @@ void func(struct drm_crtc *crtc, struct drm_crtc_state *old_state) { + struct drm_crtc_state *old_state = drm_atomic_get_old_crtc_state(state, crtc); ... } @ depends on crtc_atomic_func @ identifier crtc_atomic_func.func; expression E; type T; @@ void func(...) { ... - T state = E; + T crtc_state = E; <+... - state + crtc_state ...+> } @ depends on crtc_atomic_func @ identifier crtc_atomic_func.func; type T; @@ void func(...) { ... - T state; + T crtc_state; <+... - state + crtc_state ...+> } @ depends on crtc_atomic_func @ identifier crtc_atomic_func.func; identifier old_state; identifier crtc; @@ void func(struct drm_crtc *crtc, - struct drm_crtc_state *old_state + struct drm_atomic_state *state ) { ... } @ include depends on adds_old_state @ @@ #include <drm/drm_atomic.h> @ no_include depends on !include && adds_old_state @ @@ + #include <drm/drm_atomic.h> #include <drm/...> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/845aa10ef171fc0ea060495efef142a0c13f7870.1602161031.git-series.maxime@cerno.tech
2020-08-23treewide: Use fallthrough pseudo-keywordGustavo A. R. Silva2-3/+3
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2020-07-24Merge v5.8-rc6 into drm-nextDave Airlie2-9/+8
I've got a silent conflict + two trees based on fixes to merge. Fixes a silent merge with amdgpu Signed-off-by: Dave Airlie <airlied@redhat.com>
2020-07-07drm/meson: overlay: fix build failureNeil Armstrong1-2/+4
The recent GCC compiler is very picky with the VD_H_START() and AFBC_DEC_PIXEL_BGN_H() macros, triggering a runtime assert error as: In function 'meson_overlay_setup_scaler_params', inlined from 'meson_overlay_atomic_update' at drivers/gpu/drm/meson/meson_overlay.c:542:2: ./include/linux/compiler.h:392:38: error: call to '__compiletime_assert_341' declared with attribute error: FIELD_PREP: value too large for the field drivers/gpu/drm/meson/meson_overlay.c:413:4: note: in expansion of macro 'AFBC_DEC_PIXEL_BGN_H' 413 | AFBC_DEC_PIXEL_BGN_H(hd_start_lines - afbc_left) | | ^~~~~~~~~~~~~~~~~~~~ ./include/linux/compiler.h:392:38: error: call to '__compiletime_assert_401' declared with attribute error: FIELD_PREP: value too large for the field It's not expected to overflow these fields, but the compiler did find a case where it overflows. We can safely ignore this, so mask the value with the field width. Fixes: e860785d57306 ("drm/meson: overlay: setup overlay for Amlogic FBC") Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> [narmstrong: moved to (value) to avoid precedence issues] Link: https://patchwork.freedesktop.org/patch/msgid/20200707135009.32474-1-narmstrong@baylibre.com
2020-07-03drm/meson: crtc: handle commit of Amlogic FBC framesNeil Armstrong1-30/+88
Since the VD1 Amlogic FBC decoder is now configured by the overlay driver, commit the right registers to decode the Amlogic FBC frame. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Tested-by: Kevin Hilman <khilman@baylibre.com> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200703080728.25207-7-narmstrong@baylibre.com
2020-07-03drm/meson: overlay: setup overlay for Amlogic FBC Scatter Memory layoutNeil Armstrong1-18/+35
Setup the Amlogic FBC decoder for the VD1 video overlay plane to use read the FBC header as Scatter Memory layout reference. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Tested-by: Kevin Hilman <khilman@baylibre.com> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200703080728.25207-6-narmstrong@baylibre.com
2020-07-03drm/meson: overlay: setup overlay for Amlogic FBC Memory Saving modeNeil Armstrong1-2/+23
Setup the Amlogic FBC decoder for the VD1 video overlay plane to use a different superblock size for the Memory Saving mode. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Tested-by: Kevin Hilman <khilman@baylibre.com> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200703080728.25207-5-narmstrong@baylibre.com
2020-07-03drm/meson: overlay: setup overlay for Amlogic FBCNeil Armstrong2-8/+259
Setup the Amlogic FBC decoder for the VD1 video overlay plane. The VD1 Amlogic FBC decoder is integrated in the pipeline like the YUV pixel reading/formatter but used a direct memory address instead. This adds support for the basic layout, and needs to calculate the content body size since the header is allocated after. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Tested-by: Kevin Hilman <khilman@baylibre.com> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200703080728.25207-4-narmstrong@baylibre.com
2020-07-03drm/meson: add Amlogic Video FBC registersNeil Armstrong1-0/+22
Add the registers of the VPU VD1 Amlogic FBC decoder module, and routing register. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Tested-by: Kevin Hilman <khilman@baylibre.com> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200703080728.25207-3-narmstrong@baylibre.com
2020-07-02drm/meson: viu: fix setting the OSD burst length in VIU_OSD1_FIFO_CTRL_STATMartin Blumenstingl2-9/+8
The burst length is configured in VIU_OSD1_FIFO_CTRL_STAT[31] and VIU_OSD1_FIFO_CTRL_STAT[11:10]. The public S905D3 datasheet describes this as: - 0x0 = up to 24 per burst - 0x1 = up to 32 per burst - 0x2 = up to 48 per burst - 0x3 = up to 64 per burst - 0x4 = up to 96 per burst - 0x5 = up to 128 per burst The lower two bits map to VIU_OSD1_FIFO_CTRL_STAT[11:10] while the upper bit maps to VIU_OSD1_FIFO_CTRL_STAT[31]. Replace meson_viu_osd_burst_length_reg() with pre-defined macros which set these values. meson_viu_osd_burst_length_reg() always returned 0 (for the two used values: 32 and 64 at least) and thus incorrectly set the burst size to 24. Fixes: 147ae1cbaa1842 ("drm: meson: viu: use proper macros instead of magic constants") Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Tested-by: Christian Hewitt <christianshewitt@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200620155752.21065-1-martin.blumenstingl@googlemail.com
2020-06-29Backmerge remote-tracking branch 'drm/drm-next' into drm-misc-nextMaarten Lankhorst2-6/+2
Some conflicts with ttm_bo->offset removal, but drm-misc-next needs updating to v5.8. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2020-06-24Merge tag 'drm-misc-next-2020-06-19' of ↵Dave Airlie2-15/+2
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for v5.9: UAPI Changes: - Add DRM_MODE_TYPE_USERDEF for video modes specified in cmdline. Cross-subsystem Changes: - Assorted devicetree binding updates. - Add might_sleep() to dma_fence_wait(). - Fix fbdev's get_user_pages_fast() handling, and use pin_user_pages. - Small cleanup with IS_BUILTIN in video/fbdev drivers. - Fix video/hdmi coding style for infoframe size. Core Changes: - Silence vblank output during init. - Fix DP-MST corruption during send msg timeout. - Clear leak in drm_gem_objecs_lookup(). - Make newlines work with force connector attribute. - Fix module refcounting error in drm_encoder_slave, and use new i2c api. - Header fix for drm_managed.c - More struct_mutex removal for !legacy drivers: - Remove gem_free_object() - Removal of drm_gem_object_put_unlocked(). - Show current->comm alongside pid in debug printfs. - Add drm_client_modeset_check() + drm_client_framebuffer_flush(). - Replace drm_fb_swab16 with drm_fb_swap that also supports 32-bits. - Remove mode->vrefresh, and compactify drm_display_mode. - Use drm_* macros for logging and warnings. - Add WARN when drm_gem_get_pages is used on a private obj. - Handle importing and imported dmabuf better in shmem helpers. - Small fix for drm/mm hole size comparison, and remove invalid entry optimization. - Add a drm/mm selftest. - Set DSI connector type for DSI panels. - Assorted small fixes and documentation updates. - Fix DDI I2C device registration for MST ports, and flushing on destroy. - Fix master_set return type, used by vmwgfx. - Make the drm_set/drop_master ioctl symmetrical. Driver Changes: Allow iommu in the sun4i driver and use it for sun8i. - Simplify backlight lookup for omap, amba-clcd and tilcdc. - Hold reg_lock for rockchip. - Add support for bridge gpio and lane reordering + polarity to ti-sn65dsi86, and fix clock choice. - Small assorted fixes to tilcdc, vc4, i915, omap, fbdev/sm712fb, fbdev/pxafb, console/newport_con, msm, virtio, udl, malidp, hdlcd, bridge/ti-sn65dsi86, panfrost. - Remove hw cursor support for mgag200, and use simple kms helper + shmem helpers. - Add support for KOE Allow iommu in the sun4i driver and use it for sun8i. - Simplify backlight lookup for omap, amba-clcd and tilcdc. - Hold reg_lock for rockchip. - Add support for bridge gpio and lane reordering + polarity to ti-sn65dsi86, and fix clock choice. - Small assorted fixes to tilcdc, vc4 (multiple), i915. - Remove hw cursor support for mgag200, and use simple kms helper + shmem helpers. - Add support for KOE TX26D202VM0BWA panel. - Use GEM CMA functions in arc, arm, atmel-hlcdc, fsi-dcu, hisilicon, imx, ingenic, komeda, malidp, mcde, meson, msxfb, rcar-du, shmobile, stm, sti, tilcdc, tve200, zte. - Remove gem_print_info. - Improve gem_create_object_helper so udl can use shmem helpers. - Convert vc4 dt bindings to schemas, and add clock properties. - Device initialization cleanups for mgag200. - Add a workaround to fix DP-MST short pulses handling on broken hardware in i915. - Allow build test compiling arm drivers. - Use managed pci functions in mgag200 and ast. - Use dev_groups in malidp. - Add per pixel alpha support for PX30 VOP in rockchip. - Silence deferred probe logs in panfrost. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/001cd9a6-405d-4e29-43d8-354f53ae4e8b@linux.intel.com
2020-06-23drm: bridge: dw-hdmi: Pass drm_display_info to dw_hdmi_support_scdc()Laurent Pinchart1-1/+2
To prepare for making connector creation optional in the driver, pass the drm_display_info explicitly to dw_hdmi_support_scdc(). The pointer is passed to the callers where required, particularly to the dw_hdmi_phy_ops .init() function. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200526011505.31884-19-laurent.pinchart+renesas@ideasonboard.com
2020-06-23drm: bridge: dw-hdmi: Constify mode argument to dw_hdmi_phy_ops .init()Laurent Pinchart1-2/+2
The PHY .init() must not modify the mode it receives. Make the pointer const to enfore that. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200526011505.31884-17-laurent.pinchart+renesas@ideasonboard.com
2020-06-23drm: bridge: dw-hdmi: Pass drm_display_info to .mode_valid()Laurent Pinchart1-10/+10
Replace the drm_connector pointer passed to the .mode_valid() function with a const drm_display_info pointer, as that's all the function should need. Use the display info passed to the bridge .mode_valid() operation instead of retrieving it from the connector, to prepare for make connector creation optional. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200526011505.31884-16-laurent.pinchart+renesas@ideasonboard.com
2020-06-23drm: meson: dw-hdmi: Use dw_hdmi context to replace hackLaurent Pinchart1-2/+4
The meson-dw-hdmi driver needs to access its own context from the .mode_valid() operation. It currently gets it from the dev_private field of the drm_device retrieved from the connector, which is a hack. Use the private data passed to the .mode_valid() operation instead. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200526011505.31884-15-laurent.pinchart+renesas@ideasonboard.com
2020-06-23drm: bridge: dw-hdmi: Pass private data pointer to .mode_valid()Laurent Pinchart1-1/+2
Platform glue drivers for dw_hdmi may need to access device-specific data from their .mode_valid() implementation. They currently have no clean way to do so, and one driver hacks around it by accessing the dev_private data of the drm_device retrieved from the connector. Add a priv_data void pointer to the dw_hdmi_plat_data structure, and pass it to the .mode_valid() function. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200526011505.31884-12-laurent.pinchart+renesas@ideasonboard.com
2020-06-10drm/meson: Set GEM CMA functions with DRM_GEM_CMA_DRIVER_OPS_WITH_DUMB_CREATEThomas Zimmermann1-9/+2
DRM_GEM_CMA_DRIVER_OPS_WITH_DUMB_CREATE sets the functions in struct drm_driver to their defaults. No functional changes are made. v2: * update for DRM_GEM_CMA_DRIVER_OPS_WITH_DUMB_CREATE Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Emil Velikov <emil.velikov@collabora.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200605073247.4057-27-tzimmermann@suse.de
2020-06-10drm/meson: Use GEM CMA object functionsThomas Zimmermann1-5/+1
Create GEM objects with drm_gem_cma_create_object_default_funcs(), which allocates the object and sets CMA's default object functions. Corresponding callbacks in struct drm_driver are cleared. No functional changes are made. Driver and object-function instances use the same callback functions, with the exception of vunmap. The implementation of vunmap is empty and left out in CMA's default object functions. v3: * convert to DRIVER_OPS macro in a separate patch Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Emil Velikov <emil.velikov@collabora.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200605073247.4057-26-tzimmermann@suse.de
2020-06-02Merge tag 'drm-next-2020-06-02' of git://anongit.freedesktop.org/drm/drmLinus Torvalds6-7/+56
Pull drm updates from Dave Airlie: "Highlights: - Core DRM had a lot of refactoring around managed drm resources to make drivers simpler. - Intel Tigerlake support is on by default - amdgpu now support p2p PCI buffer sharing and encrypted GPU memory Details: core: - uapi: error out EBUSY when existing master - uapi: rework SET/DROP MASTER permission handling - remove drm_pci.h - drm_pci* are now legacy - introduced managed DRM resources - subclassing support for drm_framebuffer - simple encoder helper - edid improvements - vblank + writeback documentation improved - drm/mm - optimise tree searches - port drivers to use devm_drm_dev_alloc dma-buf: - add flag for p2p buffer support mst: - ACT timeout improvements - remove drm_dp_mst_has_audio - don't use 2nd TX slot - spec recommends against it bridge: - dw-hdmi various improvements - chrontel ch7033 support - fix stack issues with old gcc hdmi: - add unpack function for drm infoframe fbdev: - misc fbdev driver fixes i915: - uapi: global sseu pinning - uapi: OA buffer polling - uapi: remove generated perf code - uapi: per-engine default property values in sysfs - Tigerlake GEN12 enabled. - Lots of gem refactoring - Tigerlake enablement patches - move to drm_device logging - Icelake gamma HW readout - push MST link retrain to hotplug work - bandwidth atomic helpers - ICL fixes - RPS/GT refactoring - Cherryview full-ppgtt support - i915 locking guidelines documented - require linear fb stride to be 512 multiple on gen9 - Tigerlake SAGV support amdgpu: - uapi: encrypted GPU memory handling - uapi: add MEM_SYNC IB flag - p2p dma-buf support - export VRAM dma-bufs - FRU chip access support - RAS/SR-IOV updates - Powerplay locking fixes - VCN DPG (powergating) enablement - GFX10 clockgating fixes - DC fixes - GPU reset fixes - navi SDMA fix - expose FP16 for modesetting - DP 1.4 compliance fixes - gfx10 soft recovery - Improved Critical Thermal Faults handling - resizable BAR on gmc10 amdkfd: - uapi: GWS resource management - track GPU memory per process - report PCI domain in topology radeon: - safe reg list generator fixes nouveau: - HD audio fixes on recent systems - vGPU detection (fail probe if we're on one, for now) - Interlaced mode fixes (mostly avoidance on Turing, which doesn't support it) - SVM improvements/fixes - NVIDIA format modifier support - Misc other fixes. adv7511: - HDMI SPDIF support ast: - allocate crtc state size - fix double assignment - fix suspend bochs: - drop connector register cirrus: - move to tiny drivers. exynos: - fix imported dma-buf mapping - enable runtime PM - fixes and cleanups mediatek: - DPI pin mode swap - config mipi_tx current/impedance lima: - devfreq + cooling device support - task handling improvements - runtime PM support pl111: - vexpress init improvements - fix module auto-load rcar-du: - DT bindings conversion to YAML - Planes zpos sanity check and fix - MAINTAINERS entry for LVDS panel driver mcde: - fix return value mgag200: - use managed config init stm: - read endpoints from DT vboxvideo: - use PCI managed functions - drop WC mtrr vkms: - enable cursor by default rockchip: - afbc support virtio: - various cleanups qxl: - fix cursor notify port hisilicon: - 128-byte stride alignment fix sun4i: - improved format handling" * tag 'drm-next-2020-06-02' of git://anongit.freedesktop.org/drm/drm: (1401 commits) drm/amd/display: Fix potential integer wraparound resulting in a hang drm/amd/display: drop cursor position check in atomic test drm/amdgpu: fix device attribute node create failed with multi gpu drm/nouveau: use correct conflicting framebuffer API drm/vblank: Fix -Wformat compile warnings on some arches drm/amdgpu: Sync with VM root BO when switching VM to CPU update mode drm/amd/display: Handle GPU reset for DC block drm/amdgpu: add apu flags (v2) drm/amd/powerpay: Disable gfxoff when setting manual mode on picasso and raven drm/amdgpu: fix pm sysfs node handling (v2) drm/amdgpu: move gpu_info parsing after common early init drm/amdgpu: move discovery gfx config fetching drm/nouveau/dispnv50: fix runtime pm imbalance on error drm/nouveau: fix runtime pm imbalance on error drm/nouveau: fix runtime pm imbalance on error drm/nouveau/debugfs: fix runtime pm imbalance on error drm/nouveau/nouveau/hmm: fix migrate zero page to GPU drm/nouveau/nouveau/hmm: fix nouveau_dmem_chunk allocations drm/nouveau/kms/nv50-: Share DP SST mode_valid() handling with MST drm/nouveau/kms/nv50-: Move 8BPC limit for MST into nv50_mstc_get_modes() ...
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-16 14:44:09 +0000