summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/imx/imx-drm-core.c
AgeCommit message (Collapse)AuthorFilesLines
2022-01-27drm/imx: Add support for the nomodeset kernel parameterJavier Martinez Canillas1-0/+3
According to disable Documentation/admin-guide/kernel-parameters.txt, this parameter can be used to disable kernel modesetting. DRM drivers will not perform display-mode changes or accelerated rendering and only the system framebuffer will be available if it was set-up. But only a few DRM drivers currently check for nomodeset, make this driver to also support the command line parameter. Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20211217003752.3946210-26-javierm@redhat.com
2021-11-05Revert "drm/imx: Annotate dma-fence critical section in commit path"Fabio Estevam1-2/+0
This reverts commit f4b34faa08428d813fc3629f882c503487f94a12. Since commit f4b34faa0842 ("drm/imx: Annotate dma-fence critical section in commit path") the following possible circular dependency is detected: [ 5.001811] ====================================================== [ 5.001817] WARNING: possible circular locking dependency detected [ 5.001824] 5.14.9-01225-g45da36cc6fcc-dirty #1 Tainted: G W [ 5.001833] ------------------------------------------------------ [ 5.001838] kworker/u8:0/7 is trying to acquire lock: [ 5.001848] c1752080 (regulator_list_mutex){+.+.}-{3:3}, at: regulator_lock_dependent+0x40/0x294 [ 5.001903] [ 5.001903] but task is already holding lock: [ 5.001909] c176df78 (dma_fence_map){++++}-{0:0}, at: imx_drm_atomic_commit_tail+0x10/0x160 [ 5.001957] [ 5.001957] which lock already depends on the new lock. ... Revert it for now. Tested on a imx6q-sabresd. Fixes: f4b34faa0842 ("drm/imx: Annotate dma-fence critical section in commit path") Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20211104001112.4035691-1-festevam@gmail.com
2021-06-29drm/imx: Don't set struct drm_device.irq_enabledThomas Zimmermann1-11/+0
The field drm_device.irq_enabled is only used by legacy drivers with userspace modesetting. Don't set it in imx. v3: * move dcss changes into separate patch (Laurentiu) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210625082222.3845-12-tzimmermann@suse.de
2021-05-20Merge tag 'imx-drm-next-2021-05-12' of ↵Dave Airlie1-1/+20
git://git.pengutronix.de/git/pza/linux into drm-next drm/imx: fixes, dma-fence annotation, and color encoding/range plane properties - Annotate dma-fence critical section in atomic_commit_tail - Fix PRG modifiers after drmm resource conversion to regain tiled scanout capability - Add 8 pixel alignment fix to support 1366x768 resolution - Stop advertising YUV formats on planes that don't support them - Add COLOR_ENCODING and COLOR_RANGE plane properties on planes that support them - Remove unnecessarily exported symbols Signed-off-by: Dave Airlie <airlied@redhat.com> From: Philipp Zabel <p.zabel@pengutronix.de> Link: https://patchwork.freedesktop.org/patch/msgid/858310d193e10fc17221418dee6172af367eb046.camel@pengutronix.de
2021-05-10drm/imx: Add 8 pixel alignment fixSebastian Reichel1-1/+18
Some standard resolutions like 1366x768 do not work properly with i.MX6 SoCs, since the horizontal resolution needs to be aligned to 8 pixels (so 1360x768 or 1368x768 would work). This patch allocates framebuffers allocated to 8 pixels. The extra time required to send the extra pixels are removed from the blank time. In order to expose the correct display size to userspace, the stride is increased without increasing the width. Without this patch systems with this display resolution hang indefinitely during boot up. Suggested-by: Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Link: https://lore.kernel.org/r/20210428222953.235280-3-sebastian.reichel@collabora.com Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2021-05-10drm/imx: Annotate dma-fence critical section in commit pathDaniel Vetter1-0/+2
drm_atomic_helper_commit_hw_done() is the last thing (no plane cleanup apparrently), so it's the entire function. And a nice comment explaining why the wait_for_flip_done is ahead, unlike the usual sequence. Aside, I think since the atomic helpers do track plane disabling now separately this might no longer be a real problem since: commit 21a01abbe32a3cbeb903378a24e504bfd9fe0648 Author: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Date: Mon Sep 4 12:48:37 2017 +0200 drm/atomic: Fix freeing connector/plane state too early by tracking commits, v3. Plus the subsequent bugfixes of course, this was tricky to get right. Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Pengutronix Kernel Team <kernel@pengutronix.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: NXP Linux Team <linux-imx@nxp.com> Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2021-04-26Merge drm/drm-next into drm-misc-nextMaxime Ripard1-1/+1
Christian needs some patches from drm/next Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2021-04-15drm/imx: Don't set allow_fb_modifiers explicitlyDaniel Vetter1-1/+0
Since commit 890880ddfdbe256083170866e49c87618b706ac7 Author: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Date: Fri Jan 4 09:56:10 2019 +0100 drm: Auto-set allow_fb_modifiers when given modifiers at plane init this is done automatically as part of plane init, if drivers set the modifier list correctly. Which is the case here for both dcss and imx-drm drivers. Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Pengutronix Kernel Team <kernel@pengutronix.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: NXP Linux Team <linux-imx@nxp.com> Cc: linux-arm-kernel@lists.infradead.org Link: https://patchwork.freedesktop.org/patch/msgid/20210413094904.3736372-5-daniel.vetter@ffwll.ch
2021-03-25drm/imx: fix memory leak when fails to initPan Bian1-1/+1
Put DRM device on initialization failure path rather than directly return error code. Fixes: a67d5088ceb8 ("drm/imx: drop explicit drm_mode_config_cleanup") Signed-off-by: Pan Bian <bianpan2016@163.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2020-11-10Merge drm/drm-next into drm-misc-nextThomas Zimmermann1-5/+5
We need commit f8f6ae5d077a ("mm: always have io_remap_pfn_range() set pgprot_decrypted()") to be able to merge Jason's cleanup patch. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
2020-11-06drm/<drivers>: Constify struct drm_driverDaniel Vetter1-1/+1
Only the following drivers aren't converted: - amdgpu, because of the driver_feature mangling due to virt support. Subsequent patch will address this. - nouveau, because DRIVER_ATOMIC uapi is still not the default on the platforms where it's supported (i.e. again driver_feature mangling) - vc4, again because of driver_feature mangling - qxl, because the ioctl table is somewhere else and moving that is maybe a bit too much, hence the num_ioctls assignment prevents a const driver structure. - arcpgu, because that is stuck behind a pending tiny-fication series from me. - legacy drivers, because legacy requires non-const drm_driver. Note that for armada I also went ahead and made the ioctl array const. Only cc'ing the driver people who've not been converted (everyone else is way too much). v2: Fix one misplaced const static, should be static const (0day) v3: - Improve commit message (Sam) Acked-by: Sam Ravnborg <sam@ravnborg.org> Cc: kernel test robot <lkp@intel.com> Acked-by: Maxime Ripard <mripard@kernel.org> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Dave Airlie <airlied@redhat.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: virtualization@lists.linux-foundation.org Cc: Harry Wentland <harry.wentland@amd.com> Cc: Leo Li <sunpeng.li@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Eric Anholt <eric@anholt.net> Cc: Maxime Ripard <mripard@kernel.org> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: nouveau@lists.freedesktop.org Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201104100425.1922351-5-daniel.vetter@ffwll.ch
2020-10-26drm/imx: drop explicit drm_mode_config_cleanupPhilipp Zabel1-5/+5
Use drmm_mode_config_init() and drop the explicit calls to drm_mode_config_cleanup(). Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2020-07-23Merge tag 'imx-drm-next-2020-07-20' of git://git.pengutronix.de/pza/linux ↵Dave Airlie1-1/+2
into drm-next drm/imx: error path fixes and cleanups - Fix use after free issue in component bind error path by keeping memory allocated as long as the driver is bound. This will be replaced with drm managed memory in the next round. - Fix bus_flags overriding logic in parallel-display. - Disable regulator in imx-tve bind error path. - Drop unnecessary best_encoder callback. - Remove an unused enum in imx-ldb. - Bail out early on missing panel or bridge in parallel-display to speed up -EPROBE_DEFER path. - Disable both LDB channels in split mode. - Restore RGB32, BGR32 format support. - Fix tiled image conversion in case of out of order interrupts. - Remove a superfluous error message in imx-tve. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Philipp Zabel <p.zabel@pengutronix.de> Link: https://patchwork.freedesktop.org/patch/msgid/ac4452eb3a989bf5d85b65fd30840a21f15ec301.camel@pengutronix.de
2020-07-20drm/imx: fix use after freePhilipp Zabel1-1/+2
Component driver structures allocated with devm_kmalloc() in bind() are freed automatically after unbind(). Since the contained drm structures are accessed afterwards in drm_mode_config_cleanup(), move the allocation into probe() to extend the driver structure's lifetime to the lifetime of the device. This should eventually be changed to use drm resource managed allocations with lifetime of the drm device. We also need to ensure that all componets are available during the unbind() so we need to call component_unbind_all() before we free non-devres resources like planes. Note this patch fixes the the use after free bug but introduces a possible boot loop issue. The issue is triggered if the HDMI support is enabled and a component driver always return -EPROBE_DEFER, see discussion [1] for more details. [1] https://lkml.org/lkml/2020/3/24/1467 Fixes: 17b5001b5143 ("imx-drm: convert to componentised device support") Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> [m.felsch@pengutronix: fix imx_tve_probe()] [m.felsch@pengutronix: resort component_unbind_all()) [m.felsch@pengutronix: adapt commit message] Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2020-06-10drm/imx: Set GEM CMA functions with DRM_GEM_CMA_DRIVER_OPSThomas Zimmermann1-7/+1
DRM_GEM_CMA_DRIVER_OPS sets the functions in struct drm_driver to their defaults. No functional changes are made. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Emil Velikov <emil.velikov@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200605073247.4057-17-tzimmermann@suse.de
2020-06-10drm/imx: Use GEM CMA object functionsThomas Zimmermann1-5/+1
Create GEM objects with drm_gem_cma_create_object_default_funcs(), which allocates the object and sets CMA's default object functions. Corresponding callbacks in struct drm_driver are cleared. No functional changes are made. Driver and object-function instances use the same callback functions, with the exception of vunmap. The implementation of vunmap is empty and left out in CMA's default object functions. v3: * convert to DRIVER_OPS macro in a separate patch Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Emil Velikov <emil.velikov@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200605073247.4057-16-tzimmermann@suse.de
2020-04-02drm/imx: Use simple encoderThomas Zimmermann1-6/+0
The imx driver uses empty implementations for its encoders. Replace the code with the generic simple encoder. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20200305155950.2705-9-tzimmermann@suse.de
2020-03-18drm/imx: Remove the bogus possible_clones setupVille Syrjälä1-2/+2
It's not at all clear what cloning options this driver supports. So let's just clear possible_clones instead of setting it to some bogus value. v2: Adjust the FIXME (Daniel) Cc: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200211162208.16224-5-ville.syrjala@linux.intel.com
2019-07-17drm/imx: drop use of drmP.hSam Ravnborg1-2/+6
Drop use of the deprecated drmP.h header file. While touching the include files divide them in blocks and sort the include files within each block. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Emil Velikov <emil.velikov@collabora.com> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Pengutronix Kernel Team <kernel@pengutronix.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: NXP Linux Team <linux-imx@nxp.com> Cc: linux-arm-kernel@lists.infradead.org Link: https://patchwork.freedesktop.org/patch/msgid/20190716064220.18157-18-sam@ravnborg.org
2019-06-21drm/imx: Drop drm_gem_prime_export/importDaniel Vetter1-2/+0
They're the default. Aside: Would be really nice to switch the others over to drm_gem_object_funcs. Reviewed-by: Eric Anholt <eric@anholt.net> Reviewed-by: Emil Velikov <emil.velikov@collabora.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Pengutronix Kernel Team <kernel@pengutronix.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: NXP Linux Team <linux-imx@nxp.com> Cc: linux-arm-kernel@lists.infradead.org Link: https://patchwork.freedesktop.org/patch/msgid/20190614203615.12639-18-daniel.vetter@ffwll.ch
2019-06-21drm/prime: Actually remove DRIVER_PRIME everywhereDaniel Vetter1-2/+1
Split out to make the functional changes stick out more. All places where DRIVER_PRIME was used have been removed in previous patches already. v2: amdgpu gained DRIVER_SYNCOBJ_TIMELINE. v3: amdgpu lost DRIVER_SYNCOBJ_TIMELINE. v4: Don't add a space in i915_drv.c (Sam) v5: Add note that previous patches removed all the DRIVER_PRIME users already (Emil). v6: Fixupe ingenic (new driver) while applying. Cc: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Emil Velikov <emil.velikov@collabora.com> Reviewed-by: Eric Anholt <eric@anholt.net> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: amd-gfx@lists.freedesktop.org Cc: etnaviv@lists.freedesktop.org Cc: freedreno@lists.freedesktop.org Cc: intel-gfx@lists.freedesktop.org Cc: lima@lists.freedesktop.org Cc: linux-amlogic@lists.infradead.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-arm-msm@vger.kernel.org Cc: linux-aspeed@lists.ozlabs.org Cc: linux-renesas-soc@vger.kernel.org Cc: linux-rockchip@lists.infradead.org Cc: linux-samsung-soc@vger.kernel.org Cc: linux-stm32@st-md-mailman.stormreply.com Cc: linux-tegra@vger.kernel.org Cc: nouveau@lists.freedesktop.org Cc: NXP Linux Team <linux-imx@nxp.com> Cc: spice-devel@lists.freedesktop.org Cc: virtualization@lists.linux-foundation.org Cc: VMware Graphics <linux-graphics-maintainer@vmware.com> Cc: xen-devel@lists.xenproject.org Link: https://patchwork.freedesktop.org/patch/msgid/20190617153924.414-1-daniel.vetter@ffwll.ch
2019-03-06Merge drm/drm-next into drm-misc-nextSean Paul1-5/+2
Picking up v5.0 + missed misc-fixes from last release Signed-off-by: Sean Paul <seanpaul@chromium.org>
2019-02-28Merge tag 'imx-drm-next-2019-02-22' of git://git.pengutronix.de/pza/linux ↵Dave Airlie1-5/+2
into drm-next drm/imx: handle pending updates better, add plane zpos property support - Add a mechanism to only send commit done events once all pending updates have been applied. This closes a small race window where already armed events could fire even though the double buffered hardware update just missed the update window. - Add plane zpos property support to allow placing the overlay plane behind the primary plane. - Allow building imx-drm on all platforms under COMPILE_TEST. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Philipp Zabel <pza@pengutronix.de> Link: https://patchwork.freedesktop.org/patch/msgid/20190222112350.m3ucezilqx6cyest@pengutronix.de
2019-02-22drm/imx: ipuv3-plane: add zpos propertyPhilipp Zabel1-5/+2
Add a zpos property to planes. Call drm_atomic_helper_check() instead of calling drm_atomic_helper_check_modeset() and drm_atomic_check_planes() manually. This effectively adds a call to drm_atomic_normalize_zpos() before checking planes. Reorder atomic update to allow changing plane zpos without modeset. Note that the initial zpos is set in ipu_plane_state_reset(). The initial value set in ipu_plane_init() is just for show. The zpos parameter of drm_plane_create_zpos_property() is ignored because the newly created plane do not have state yet. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Tested-by: Marius Vlad <marius.vlad@collabora.com>
2019-02-19drm: imx: Use of_node_name_eq for node name comparisonsRob Herring1-1/+1
Convert string compares of DT node names to use of_node_name_eq helper instead. This removes direct access to the node name pointer. For instances using of_node_cmp, this has the side effect of now using case sensitive comparisons. This should not matter for any FDT based system which this is. Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: David Airlie <airlied@linux.ie> Cc: dri-devel@lists.freedesktop.org Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Philipp Zabel <p.zabel@pengutronix.de> Link: https://patchwork.freedesktop.org/patch/msgid/20181205195050.4759-7-robh@kernel.org Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-01-24drm: Split out drm_probe_helper.hDaniel Vetter1-3/+3
Having the probe helper stuff (which pretty much everyone needs) in the drm_crtc_helper.h file (which atomic drivers should never need) is confusing. Split them out. To make sure I actually achieved the goal here I went through all drivers. And indeed, all atomic drivers are now free of drm_crtc_helper.h includes. v2: Make it compile. There was so much compile fail on arm drivers that I figured I'll better not include any of the acks on v1. v3: Massive rebase because i915 has lost a lot of drmP.h includes, but not all: Through drm_crtc_helper.h > drm_modeset_helper.h -> drmP.h there was still one, which this patch largely removes. Which means rolling out lots more includes all over. This will also conflict with ongoing drmP.h cleanup by others I expect. v3: Rebase on top of atomic bochs. v4: Review from Laurent for bridge/rcar/omap/shmob/core bits: - (re)move some of the added includes, use the better include files in other places (all suggested from Laurent adopted unchanged). - sort alphabetically v5: Actually try to sort them, and while at it, sort all the ones I touch. v6: Rebase onto i915 changes. v7: Rebase once more. Acked-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Acked-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Acked-by: Jani Nikula <jani.nikula@intel.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com> Acked-by: CK Hu <ck.hu@mediatek.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Liviu Dudau <liviu.dudau@arm.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: linux-arm-kernel@lists.infradead.org Cc: virtualization@lists.linux-foundation.org Cc: etnaviv@lists.freedesktop.org Cc: linux-samsung-soc@vger.kernel.org Cc: intel-gfx@lists.freedesktop.org Cc: linux-mediatek@lists.infradead.org Cc: linux-amlogic@lists.infradead.org Cc: linux-arm-msm@vger.kernel.org Cc: freedreno@lists.freedesktop.org Cc: nouveau@lists.freedesktop.org Cc: spice-devel@lists.freedesktop.org Cc: amd-gfx@lists.freedesktop.org Cc: linux-renesas-soc@vger.kernel.org Cc: linux-rockchip@lists.infradead.org Cc: linux-stm32@st-md-mailman.stormreply.com Cc: linux-tegra@vger.kernel.org Cc: xen-devel@lists.xen.org Link: https://patchwork.freedesktop.org/patch/msgid/20190117210334.13234-1-daniel.vetter@ffwll.ch
2018-11-05drm/imx: Switch to SPDX identifierFabio Estevam1-10/+1
Adopt the SPDX license identifier headers to ease license compliance management. Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2018-10-05drm/imx: fix build failure without CONFIG_DRM_FBDEV_EMULATIONArnd Bergmann1-2/+0
The variable is declared in an #ifdef section, but the user is now unconditional, which leads to a build failure: drivers/gpu/drm/imx/imx-drm-core.c: In function 'imx_drm_bind': drivers/gpu/drm/imx/imx-drm-core.c:264:6: error: 'legacyfb_depth' undeclared (first use in this function); did you mean 'lockdep_depth'? Remove the remaining #ifdef as well. Fixes: f53705fd9803 ("drm/imx: Use drm_fbdev_generic_setup()") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Link: https://patchwork.freedesktop.org/patch/msgid/20180926193846.2490574-1-arnd@arndb.de
2018-09-25drm/imx: Use drm_fbdev_generic_setup()Noralf Trønnes1-15/+4
The CMA helper is already using the drm_fb_helper_generic_probe part of the generic fbdev emulation. This patch makes full use of the generic fbdev emulation by using its drm_client callbacks. This means that drm_mode_config_funcs->output_poll_changed and drm_driver->lastclose are now handled by the emulation code. Additionally fbdev unregister happens automatically on drm_dev_unregister(). The drm_fbdev_generic_setup() call is put after drm_dev_register() in the driver. This is done to highlight the fact that fbdev emulation is an internal client that makes use of the driver, it is not part of the driver as such. If fbdev setup fails, an error is printed, but the driver succeeds probing. CONFIG_DRM_FBDEV_EMULATION wasn't honoured by the CMA helper, but it is by drm_fb_helper. Cc: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Acked-by: Sam Ravnborg <sam@ravnborg.org> Tested-by: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: Philipp Zabel <p.zabel@pengutronix.de> Link: https://patchwork.freedesktop.org/patch/msgid/20180908134648.2582-12-noralf@tronnes.org
2018-08-01drm/imx: Convert drm_atomic_helper_suspend/resume()Souptick Joarder1-40/+2
convert drm_atomic_helper_suspend/resume() to use drm_mode_config_helper_suspend/resume(). with this conversion, the remaining member of struct imx_drm_device, state, will be no more useful and it could be removed forever. Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com> Signed-off-by: Ajit Negi <ajitn.linux@gmail.com> [p.zabel@pengutronix.de: rebased onto drm-next, updated commit message] Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2018-07-17drm/imx: Remove unused field imx_drm_device.pipesLeonard Crestez1-1/+0
This has been unused since commit 44b460cfe554 ("drm: imx: remove struct imx_drm_crtc and imx_drm_crtc_helper_funcs") Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2018-07-17drm/imx: Replace drm_dev_unref with drm_dev_putThomas Zimmermann1-4/+4
This patch unifies the naming of DRM functions for reference counting of struct drm_device. The resulting code is more aligned with the rest of the Linux kernel interfaces. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2018-01-05Merge tag 'imx-drm-next-2018-01-02' of ↵Dave Airlie1-0/+1
git://git.pengutronix.de/git/pza/linux into drm-next drm/imx: format modifier support - Add tiled prefetch support to PRE - Add format modifier support to PRG and imx-drm-core - Use runtime PM to control PRG clock - Allow building ipu-v3 under COMPILE_TEST * tag 'imx-drm-next-2018-01-02' of git://git.pengutronix.de/git/pza/linux: gpu: ipu-v3: allow to build with COMPILE_TEST drm/imx: advertise supported plane format modifiers drm/imx: add FB modifier support gpu: ipu-v3: prg: add modifier support gpu: ipu-v3: pre: add tiled prefetch support gpu: ipu-v3: prg: switch to runtime PM
2017-12-19drm/imx: add FB modifier supportLucas Stach1-0/+1
This adds FB modifier support for the Vivante single buffer tiled formats, when the PRG/PRE engines are present. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2017-12-08drm/imx: Use drm_fb_cma_fbdev_init/fini()Noralf Trønnes1-27/+6
Use drm_fb_cma_fbdev_init() and drm_fb_cma_fbdev_fini() which relies on the fact that drm_device holds a pointer to the drm_fb_helper structure. This means that the driver doesn't have to keep track of that. Also use the drm_fb_helper functions directly. Cc: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Acked-by: Philipp Zabel <p.zabel@pengutronix.de> Link: https://patchwork.freedesktop.org/patch/msgid/20171115142001.45358-8-noralf@tronnes.org
2017-11-30drm/imx: always call wait_for_flip_done in commit_tailLucas Stach1-2/+9
drm_atomic_helper_wait_for_vblanks will go away in the future. The new drm_atomic_helper_setup_commit in 4.15 expects that blocking commits have completed flipping before the commit_tail returns. This must be ensured by calling wait_for_vblanks or wait_for_flip_done, where flip_done might do a less agressive wait, which is fine for imx-drm. Fixes: 080de2e5be2d (drm/atomic: Check for busy planes/connectors before setting the commit) Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2017-09-16drm/imx: Use drm_gem_fb_create() and drm_gem_fb_prepare_fb()Noralf Trønnes1-1/+2
drm_fb_cma_create() and drm_fb_cma_prepare_fb() are just wrappers now, use drm_gem_fb_create() and drm_gem_fb_prepare_fb() directly. Cc: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Acked-by: Philipp Zabel <p.zabel@pengutronix.de> Link: https://patchwork.freedesktop.org/patch/msgid/1502631125-13557-11-git-send-email-noralf@tronnes.org
2017-07-29drm/imx: Use .dumb_map_offset and .dumb_destroy defaultsNoralf Trønnes1-2/+0
This driver can use the drm_driver.dumb_destroy and drm_driver.dumb_map_offset defaults, so no need to set them. Cc: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Acked-by: Philipp Zabel <p.zabel@pengutronix.de> Link: https://patchwork.freedesktop.org/patch/msgid/1500837417-40580-10-git-send-email-noralf@tronnes.org
2017-07-13drm/imx: Use atomic iterator macrosMaarten Lankhorst1-4/+4
for_each_obj_in_state is about to be removed, so use the new atomic iterator macros. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Philipp Zabel <p.zabel@pengutronix.de> Link: http://patchwork.freedesktop.org/patch/msgid/20170712081344.25495-13-maarten.lankhorst@linux.intel.com Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Tested-by: Philipp Zabel <p.zabel@pengutronix.de>
2017-05-31drm/imx: Drop drm_vblank_cleanupDaniel Vetter1-3/+1
It's only done in the driver load error path, where vblanks don't need to be quiescent anyway. And that's all drm_vblank_cleanup does, since the core will release the vblank allocations on its own already. So drop it. Cc: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170524145212.27837-24-daniel.vetter@ffwll.ch
2017-04-07Merge tag 'imx-drm-next-2017-04-04' of ↵Dave Airlie1-1/+17
git://git.pengutronix.de/git/pza/linux into drm-next imx-drm module/dependency changes - The PRE/PRG drivers added an unwanted DRM dependency to the ipu-v3 driver. Remove the dependency by conditionally disabling PRE/PRG support depending on CONFIG_DRM. - Merge the imx-ipuv3-crtc module into the imxdrm module. There is no reason anymore for a separation between core drm driver and crtc/plane drivers, especially since commit eb8c88808c83 ("drm/imx: add deferred plane disabling"), which added a dependency on imx-ipuv3-crtc to the imxdrm module. * tag 'imx-drm-next-2017-04-04' of git://git.pengutronix.de/git/pza/linux: drm/imx: merge imx-drm-core and ipuv3-crtc in one module gpu: ipu-v3: don't depend on DRM being enabled
2017-04-04drm/imx: merge imx-drm-core and ipuv3-crtc in one moduleLucas Stach1-1/+17
While it is possible to hook other CRTC implementations into imx-drm in practice there are none yet and the option to disable ipuv3-crtc support has been hidden for a long time. Now that the imx-drm-core has learned to deal with some of the specifics of IPUv3 there is a cyclic dependency between both parts. To get rid of this and to decimate the Kconfig maze a bit, simply merge both parts into one module. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2017-03-23Merge tag 'drm-misc-next-2017-03-21' of ↵Dave Airlie1-10/+1
git://anongit.freedesktop.org/git/drm-misc into drm-next drm-misc for 4.12, 2nd attempt this week: - topic branch from Jon Corbet for the new graph kerneldoc support - lots of graphs for kms/atomic things using the above - some vblank query tuning from Chris - gem/cma_fops macros - moar docs Driver stuff: - vc4 hdmi audio, yay (Eric) - dw-hdmi polish from a bunch of people - some rockchip dp updates that didn't make last week (Chris Zhong) - misc bridge&driver updates * tag 'drm-misc-next-2017-03-21' of git://anongit.freedesktop.org/git/drm-misc: (37 commits) drm/edid: detect SCDC support in HF-VSDB drm/edid: detect SCDC support in HF-VSDB drm/edid: check for HF-VSDB block drm: Add SCDC helpers drm: bridge: dw-hdmi: add HDMI vendor specific infoframe config drm/bridge: dw_hdmi: support i2c extended read mode drm/msm: add stubs for msm_{perf,rd}_debugfs_cleanup drm: bochs: Don't remove uninitialized fbdev framebuffer drm: vc4: remove redundant check of plane being non-null drm/vc4: use platform_register_drivers dma-fence: add dma_fence_match_context helper drm/vc4: Add HDMI audio support dt-bindings: Document the dmas and dma-names properties for VC4 HDMI drm/atmel-hlcdc: Fix suspend/resume implementation drm: Skip the waitqueue setup for vblank queries drm: Defer disabling the vblank IRQ until the next interrupt (for instant-off) drm/doc: atomic overview, with graph drm/doc: diagram for mode objects and properties drm/doc: Consistent kerneldoc include order drm/doc: Add KMS overview graphs ...
2017-03-16drm/imx: Remove unneeded definition for structure imx_drm_componentLiu Ying1-5/+0
No one is using the structure imx_drm_component, so let's remove the definition to save several lines. Signed-off-by: Liu Ying <gnuiyl@gmail.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2017-03-16drm/imx: use PRG/PRE when possibleLucas Stach1-0/+5
Allow the planes to use the PRG/PRE units as linear prefetchers when possible. This improves DRAM efficiency a bit and reduces the chance for display underflow when the memory subsystem is under load. This does not yet support scanning out tiled buffers directly, as this needs more work, but it already wires up the basic interaction between imx-drm, the IPUv3 driver and the PRG and PRE drivers. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2017-03-15drm/imx: add deferred plane disablingPhilipp Zabel1-0/+18
The DP (display processor) channel disable code tried to busy wait for the DP sync flow end interrupt status bit when disabling the partial plane without a full modeset. That never worked reliably, and it was disabled completely by the recent "gpu: ipu-v3: remove IRQ dance on DC channel disable" patch, causing ipu_wait_interrupt to always time out after 50 ms, which in turn would trigger a timeout in drm_atomic_helper_wait_for_vblanks. This patch changes ipu_plane_atomic_disable to only queue a DP channel register update at the next frame boundary and set a flag, which can be done without any waiting whatsoever. The imx_drm_atomic_commit_tail then calls a new ipu_plane_disable_deferred function that does the actual IDMAC teardown of the planes that are flagged for deferred disabling, after waiting for the vblank. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
2017-03-15drm/imx: don't wait for vblank and stop calling cleanup_planes in commit_tailPhilipp Zabel1-4/+0
drm_atomic_helper_cleanup_planes only calls the cleanup_fb plane helpers, which we don't implement as a CMA framebuffer based driver. There is no reason to wait for vblanks in commit_tail only to do nothing afterwards. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
2017-03-14drm: Create DEFINE_DRM_GEM_CMA_FOPS and roll it out to driversDaniel Vetter1-10/+1
Less code ftw. This converts all drivers except the tinydrm helper module. That one needs more work, since it gets the THIS_MODULE reference from tinydrm.ko instead of the actual driver module like it should. Probably needs a similar trick like I used here with generating the entire struct with a macro. Cc: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Sean Paul <seanpaul@chromium.org> Reviewed-by: Liviu Dudau <Liviu.Dudau@arm.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170308141257.12119-24-daniel.vetter@ffwll.ch
2017-02-26Merge airlied/drm-next into drm-misc-nextDaniel Vetter1-2/+2
Backmerge the main pull request to sync up with all the newly landed drivers. Otherwise we'll have chaos even before 4.12 started in earnest. Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
2017-02-23Merge tag 'imx-drm-fixes-2017-02-17' of ↵Dave Airlie1-2/+2
https://git.pengutronix.de/git/pza/linux into drm-next imx-drm: TVE regulator, fb size limit, and ipu-v3 module fixes - Fix i.MX5 TV encoder probing in case no dac-supply regulator is set in the device tree. - Remove 64 pixel min_width/height limit, which unnecessarily prohibits creation of small frame buffers. - Add missing ipu_csi_set_downsize export, for media drivers built as modules. - Stop modifying pdev->dev.of_node for IPU client devices that do not have an OF modalias to fix module autoloading. * tag 'imx-drm-fixes-2017-02-17' of https://git.pengutronix.de/git/pza/linux: gpu: ipu-v3: Stop overwriting pdev->dev.of_node of child devices gpu: ipu-v3: export ipu_csi_set_downsize drm/imx: lift 64x64 pixel minimum framebuffer size requirement drm/imx: imx-tve: Do not set the regulator voltage
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-13 09:36:39 +0000