summaryrefslogtreecommitdiff
path: root/drivers/gpio
AgeCommit message (Collapse)AuthorFilesLines
2015-05-12gpio: gpio-kempld: Fix get_direction return valueMichael Brunner1-1/+1
This patch fixes an inverted return value of the gpio get_direction function. The wrong value causes the direction sysfs entry and GPIO debugfs file to indicate incorrect GPIO direction settings. In some cases it also prevents setting GPIO output values. The problem is also present in all other stable kernel versions since linux-3.12. Cc: Stable <stable@vger.kernel.org> # v3.12+ Reported-by: Jochen Henneberg <jh@henneberg-systemdesign.com> Signed-off-by: Michael Brunner <michael.brunner@kontron.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-05-12gpio: fix gpio leak in gpiochip_add error pathJohan Hovold1-4/+6
Make sure to free any hogged gpios on errors in gpiochip_add. Also move all forward declarations to the top of the file. Fixes: f625d4601759 ("gpio: add GPIO hogging mechanism") Signed-off-by: Johan Hovold <johan@kernel.org> Reviewed-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-05-06gpio: omap: Fix regression for MPUIO interruptsTony Lindgren1-39/+9
At some point with all the GPIO clean-up we've broken the MPUIO interrupts. Those are just a little bit different from the GPIO interrupts, so we can fix it up just by setting different irqchip functions for it. And then we can just remove all old code trying to do the same. Cc: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Javier Martinez Canillas <javier@dowhile0.org> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Reviewed-by: Grygorii Strashko <grygorii.strashko@linaro.org> Acked-by: Santosh Shilimkar <ssantosh@kernel.org> Reviewed-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-04-29gpio: sysfs: fix memory leaks and device hotplugJohan Hovold1-0/+19
Unregister GPIOs requested through sysfs at chip remove to avoid leaking the associated memory and sysfs entries. The stale sysfs entries prevented the gpio numbers from being exported when the gpio range was later reused (e.g. at device reconnect). This also fixes the related module-reference leak. Note that kernfs makes sure that any on-going sysfs operations finish before the class devices are unregistered and that further accesses fail. The chip exported flag is used to prevent gpiod exports during removal. This also makes it harder to trigger, but does not fix, the related race between gpiochip_remove and export_store, which is really a race with gpiod_request that needs to be addressed separately. Also note that this would prevent the crashes (e.g. NULL-dereferences) at reconnect that affects pre-3.18 kernels, as well as use-after-free on operations on open attribute files on pre-3.14 kernels (prior to kernfs). Fixes: d8f388d8dc8d ("gpio: sysfs interface") Cc: stable <stable@vger.kernel.org> # v2.6.27: 01cca93a9491 Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-04-27gpiolib: change gpio pin from unsigned to signed in acpi callbackQipeng Zha1-1/+1
The signed error will be wrongly used as valid gpio offset Reported-by: David Binderman <dcb314@hotmail.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Qipeng Zha <qipeng.zha@intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-04-22Merge tag 'armsoc-cleanup' of ↵Linus Torvalds3-723/+0
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC cleanups from Olof Johansson: "We've got a fairly large cleanup branch this time. The bulk of this is removal of non-DT platforms of several flavors: - Atmel at91 platforms go full-DT, with removal of remaining board-file based support - OMAP removes legacy board files for three more platforms - removal of non-DT mach-msm, newer Qualcomm platforms now live in mach-qcom - Freescale i.MX25 also removes non-DT platform support" Most of the rest of the changes here are fallout from the above, i.e. for example removal of drivers that now lack platforms, etc. * tag 'armsoc-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (58 commits) mmc: Remove msm_sdcc driver gpio: Remove gpio-msm-v1 driver ARM: Remove mach-msm and associated ARM architecture code ARM: shmobile: cpuidle: Remove the pointless default driver ARM: davinci: dm646x: Add interrupt resource for McASPs ARM: davinci: irqs: Correct McASP1 TX interrupt definition for DM646x ARM: davinci: dm646x: Clean up the McASP DMA resources ARM: davinci: devices-da8xx: Add support for McASP2 on da830 ARM: davinci: devices-da8xx: Clean up and correct the McASP device creation ARM: davinci: devices-da8xx: Add interrupt resource to McASP structs ARM: davinci: devices-da8xx: Add resource name for the McASP DMA request ARM: OMAP2+: Remove legacy support for omap3 TouchBook ARM: OMAP3: Remove legacy support for devkit8000 ARM: OMAP3: Remove legacy support for EMA-Tech Stalker board ARM: shmobile: Consolidate the pm code for R-Car Gen2 ARM: shmobile: r8a7791: Correct SYSCIER value ARM: shmobile: r8a7790: Correct SYSCIER value ARM: at91: remove old setup ARM: at91: sama5d4: remove useless map_io ARM: at91: sama5 use SoC detection infrastructure ...
2015-04-18Merge tag 'gpio-v4.1-1' of ↵Linus Torvalds30-697/+1740
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO updates from Linus Walleij: "This is the bulk of GPIO changes for the v4.1 development cycle: - A new GPIO hogging mechanism has been added. This can be used on boards that want to drive some GPIO line high, low, or set it as input on boot and then never touch it again. For some embedded systems this is bliss and simplifies things to a great extent. - Some API cleanup and closure: gpiod_get_array() and gpiod_put_array() has been added to get and put GPIOs in bulk as was possible with the non-descriptor API. - Encapsulate cross-calls to the pin control subsystem in <linux/gpio/driver.h>. Now this should be the only header any GPIO driver needs to include or something is wrong. Cleanups restricting drivers to this include are welcomed if tested. - Sort the GPIO Kconfig and split it into submenus, as it was becoming and unstructured, illogical and unnavigatable mess. I hope this is easier to follow. Menus that require a certain subsystem like I2C can now be hidden nicely for example, still working on others. - New drivers: - New driver for the Altera Soft GPIO. - The F7188x driver now handles the F71869 and F71869A variants. - The MIPS Loongson driver has been moved to drivers/gpio for consolidation and cleanup. - Cleanups: - The MAX732x is converted to use the GPIOLIB_IRQCHIP infrastructure. - The PCF857x is converted to use the GPIOLIB_IRQCHIP infrastructure. - Radical cleanup of the OMAP driver. - Misc: - Enable the DWAPB GPIO for all architectures. This is a "hard IP" block from Synopsys which has started to turn up in so diverse architectures as X86 Quark, ARC and a slew of ARM systems. So even though it's not an expander, it's generic enough to be available for all. - We add a mock GPIO on Crystalcove PMIC after a long discussion with Daniel Vetter et al, tracing back to the shootout at the kernel summit where DRM drivers and sub-componentization was discussed. In this case a mock GPIO is assumed to be the best compromise gaining some reuse of infrastructure without making DRM drivers overly complex at the same time. Let's see" * tag 'gpio-v4.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (62 commits) Revert "gpio: sch: use uapi/linux/pci_ids.h directly" gpio: dwapb: remove dependencies gpio: dwapb: enable for ARC gpio: removing kfree remove functionality gpio: mvebu: Fix mask/unmask managment per irq chip type gpio: split GPIO drivers in submenus gpio: move MFD GPIO drivers under their own comment gpio: move BCM Kona Kconfig option gpio: arrange SPI Kconfig symbols alphabetically gpio: arrange PCI GPIO controllers alphabetically gpio: arrange I2C Kconfig symbols alphabetically gpio: arrange Kconfig symbols alphabetically gpio: ich: Implement get_direction function gpio: use (!foo) instead of (foo == NULL) gpio: arizona: drop owner assignment from platform_drivers gpio: max7300: remove 'ret' variable gpio: use devm_kzalloc gpio: sch: use uapi/linux/pci_ids.h directly gpio: x-gene: fix devm_ioremap_resource() check gpio: loongson: Add Loongson-3A/3B GPIO driver support ...
2015-04-14Merge tag 'pm+acpi-4.1-rc1' of ↵Linus Torvalds1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management and ACPI updates from Rafael Wysocki: "These are mostly fixes and cleanups all over, although there are a few items that sort of fall into the new feature category. First off, we have new callbacks for PM domains that should help us to handle some issues related to device initialization in a better way. There also is some consolidation in the unified device properties API area allowing us to use that inferface for accessing data coming from platform initialization code in addition to firmware-provided data. We have some new device/CPU IDs in a few drivers, support for new chips and a new cpufreq driver too. Specifics: - Generic PM domains support update including new PM domain callbacks to handle device initialization better (Russell King, Rafael J Wysocki, Kevin Hilman) - Unified device properties API update including a new mechanism for accessing data provided by platform initialization code (Rafael J Wysocki, Adrian Hunter) - ARM cpuidle update including ARM32/ARM64 handling consolidation (Daniel Lezcano) - intel_idle update including support for the Silvermont Core in the Baytrail SOC and for the Airmont Core in the Cherrytrail and Braswell SOCs (Len Brown, Mathias Krause) - New cpufreq driver for Hisilicon ACPU (Leo Yan) - intel_pstate update including support for the Knights Landing chip (Dasaratharaman Chandramouli, Kristen Carlson Accardi) - QorIQ cpufreq driver update (Tang Yuantian, Arnd Bergmann) - powernv cpufreq driver update (Shilpasri G Bhat) - devfreq update including Tegra support changes (Tomeu Vizoso, MyungJoo Ham, Chanwoo Choi) - powercap RAPL (Running-Average Power Limit) driver update including support for Intel Broadwell server chips (Jacob Pan, Mathias Krause) - ACPI device enumeration update related to the handling of the special PRP0001 device ID allowing DT-style 'compatible' property to be used for ACPI device identification (Rafael J Wysocki) - ACPI EC driver update including limited _DEP support (Lan Tianyu, Lv Zheng) - ACPI backlight driver update including a new mechanism to allow native backlight handling to be forced on non-Windows 8 systems and a new quirk for Lenovo Ideapad Z570 (Aaron Lu, Hans de Goede) - New Windows Vista compatibility quirk for Sony VGN-SR19XN (Chen Yu) - Assorted ACPI fixes and cleanups (Aaron Lu, Martin Kepplinger, Masanari Iida, Mika Westerberg, Nan Li, Rafael J Wysocki) - Fixes related to suspend-to-idle for the iTCO watchdog driver and the ACPI core system suspend/resume code (Rafael J Wysocki, Chen Yu) - PM tracing support for the suspend phase of system suspend/resume transitions (Zhonghui Fu) - Configurable delay for the system suspend/resume testing facility (Brian Norris) - PNP subsystem cleanups (Peter Huewe, Rafael J Wysocki)" * tag 'pm+acpi-4.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (74 commits) ACPI / scan: Fix NULL pointer dereference in acpi_companion_match() ACPI / scan: Rework modalias creation when "compatible" is present intel_idle: mark cpu id array as __initconst powercap / RAPL: mark rapl_ids array as __initconst powercap / RAPL: add ID for Broadwell server intel_pstate: Knights Landing support intel_pstate: remove MSR test cpufreq: fix qoriq uniprocessor build ACPI / scan: Take the PRP0001 position in the list of IDs into account ACPI / scan: Simplify acpi_match_device() ACPI / scan: Generalize of_compatible matching device property: Introduce firmware node type for platform data device property: Make it possible to use secondary firmware nodes PM / watchdog: iTCO: stop watchdog during system suspend cpufreq: hisilicon: add acpu driver ACPI / EC: Call acpi_walk_dep_device_list() after installing EC opregion handler cpufreq: powernv: Report cpu frequency throttling intel_idle: Add support for the Airmont Core in the Cherrytrail and Braswell SOCs intel_idle: Update support for Silvermont Core in Baytrail SOC PM / devfreq: tegra: Register governor on module init ...
2015-04-14Merge tag 'mfd-for-linus-4.1' of ↵Linus Torvalds3-3/+2
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "Changes to existing drivers: - Rename child driver [axp288_battery => axp288_fuel_gauge]; axp20x - Rename child driver [max77693-flash => max77693-led]; max77693 - Error handling fixes; intel_soc_pmic - GPIO tweaking; intel_soc_pmic - Remove non-DT code; vexpress-sysreg, tc3589x - Remove unused/legacy code; ti_am335x_tscadc, rts5249, rtsx_gops, rtsx_pcr, rtc-s5m, sec-core, max77693, menelaus, wm5102-tables - Trivial fixups; rtsx_pci, da9150-core, sec-core, max7769, max77693, mc13xxx-core, dln2, hi6421-pmic-core, rk808, twl4030-power, lpc_ich, menelaus, twl6040 - Update register/address values; rts5227, rts5249 - DT and/or binding document fixups; arizona, da9150, mt6397, axp20x, qcom-rpm, qcom-spmi-pmic - Couple of trivial core Kconfig fixups - Remove use of seq_printf return value; ab8500-debugfs - Remove __exit markups; menelaus, tps65010 - Fix platform-device name collisions; mfd-core New drivers/supported devices: - Add support for wm8280/wm8281 into arizona - Add support for COMe-cBL6 into kempld-core - Add support for rts524a and rts525a into rts5249 - Add support for ipq8064 into qcom_rpm - Add support for extcon into axp20x - New MediaTek MT6397 PMIC driver - New Maxim MAX77843 PMIC dirver - New Intel Quark X1000 I2C-GPIO driver - New Skyworks SKY81452 driver" * tag 'mfd-for-linus-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (76 commits) mfd: sec: Fix RTC alarm interrupt number on S2MPS11 mfd: wm5102: Remove registers for output 3R from readable list mfd: tps65010: Remove incorrect __exit markups mfd: devicetree: bindings: Add Qualcomm RPM regulator subnodes mfd: axp20x: Add support for extcon cell mfd: lpc_ich: Sort IDs mfd: twl6040: Remove wrong and unneeded "platform:twl6040" modalias mfd: qcom-spmi-pmic: Add specific compatible strings for Qualcomm's SPMI PMIC's mfd: axp20x: Fix duplicate const for model names mfd: menelaus: Use macro for magic number mfd: menelaus: Drop support for SW controller VCORE mfd: menelaus: Delete omap_has_menelaus mfd: arizona: Correct type of gpio_defaults mfd: lpc_ich: Sort IDs mfd: Fix a typo in Kconfig mfd: qcom_rpm: Add support for IPQ8064 mfd: devicetree: qcom_rpm: Document IPQ8064 resources mfd: core: Fix platform-device name collisions mfd: intel_quark_i2c_gpio: Don't crash if !DMI dt-bindings: Add vendor-prefix for X-Powers ...
2015-04-13Merge branch 'device-properties'Rafael J. Wysocki1-0/+2
* device-properties: device property: Introduce firmware node type for platform data device property: Make it possible to use secondary firmware nodes driver core: Implement device property accessors through fwnode ones driver core: property: Update fwnode_property_read_string_array() driver core: Add comments about returning array counts ACPI: Introduce has_acpi_companion() driver core / ACPI: Represent ACPI companions using fwnode_handle
2015-04-10Revert "gpio: sch: use uapi/linux/pci_ids.h directly"Linus Walleij1-1/+1
This reverts commit d1e10dc8c104d533547f6e499550fafc36809943. This commit should not go through this tree. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-04-09gpio: dwapb: remove dependenciesLinus Walleij1-1/+0
The Synopsys DesignWare DWAPB GPIO block is popular to synthesize amongst many architectures: X86, ARM, ARC. The driver was restricted to only these archs due to using [read|write]l_relaxed() accessors that were not universally available in the past, but as of commit 9439eb3ab9d1ece6e4ad7baaa4a7f534f9b9dab0 "asm-generic: io: implement relaxed accessor macros as conditional wrappers" these accessors are available on all archs so this should not be a problem any more. Enable the driver for all archs. Cc: Alexey Brodkin <Alexey.Brodkin@synopsys.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-04-08gpio: dwapb: enable for ARCVineet Gupta1-1/+1
Synopsys SDP platform uses DW GPIO controller in design with ARC cores. So adding ARC to architectures that may select this GPIO controller. Even though support for Synopsys SDP is yet to be submitted we'll need this tiny option enabled at least for properly working interrupts (DW GPIO controller is used as interrupt controller). Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-04-08gpio: removing kfree remove functionalityVarka Bhadram2-2/+1
commit 3de07e5aaf290a0b58919 ("drivers: gpio: use devm_kzalloc") introduce devm_kzalloc() for allocating the memory. In this case kfree is not required to use. Above commit id introduced the bug that kfree is not removed from the remove function. This patch fix the above bug. Signed-off-by: Varka Bhadram <varkab@cdac.in> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-04-08gpio: mvebu: Fix mask/unmask managment per irq chip typeGregory CLEMENT1-8/+16
Level IRQ handlers and edge IRQ handler are managed by tow different sets of registers. But currently the driver uses the same mask for the both registers. It lead to issues with the following scenario: First, an IRQ is requested on a GPIO to be triggered on front. After, this an other IRQ is requested for a GPIO of the same bank but triggered on level. Then the first one will be also setup to be triggered on level. It leads to an interrupt storm. The different kind of handler are already associated with two different irq chip type. With this patch the driver uses a private mask for each one which solves this issue. It has been tested on an Armada XP based board and on an Armada 375 board. For the both boards, with this patch is applied, there is no such interrupt storm when running the previous scenario. This bug was already fixed but in a different way in the legacy version of this driver by Evgeniy Dushistov: 9ece8839b1277fb9128ff6833411614ab6c88d68 "ARM: orion: Fix for certain sequence of request_irq can cause irq storm". The fact the new version of the gpio drive could be affected had been discussed there: http://thread.gmane.org/gmane.linux.ports.arm.kernel/344670/focus=364012 Reported-by: Evgeniy A. Dushistov <dushistov@mail.ru> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Cc: <stable@vger.kernel.org> # v3.7 + Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-04-08gpio: split GPIO drivers in submenusLinus Walleij1-6/+22
Create Kconfig submenus for memory mapped, I2C, MFD, PCI, SPI and USB GPIO drivers to help navigate the forest of drivers in this subsystem. The I2C, SPI and USB menus get dependencies so we don't have to see them unless we have the required subsystem enabled in the first place. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-04-08gpio: move MFD GPIO drivers under their own commentLinus Walleij1-159/+156
Get rid of AC97, MODULbus and other weird subheadings for GPIO drivers. Move all MFD drivers out of I2C etc and in under the MFD comment. This is too weird as it is and makes no sense, if the dependent parent driver is MFD, group these as MFD GPIO drivers. Alphabetize and move this comment group inbetween "I2C" and "PCI" to also have the groups in alphabetic order. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-04-08gpio: move BCM Kona Kconfig optionLinus Walleij1-6/+6
Move the Kconfig option for the Broadcom BCM Kona up to the commin GPIO controllers, as it is currently grouped under MODULbus expanders which it definately is not. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-04-08gpio: arrange SPI Kconfig symbols alphabeticallyLinus Walleij1-8/+8
Rearrange the SPI GPIO expanders in alphabetic order as already indicated by the comment in the file. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-04-08gpio: arrange PCI GPIO controllers alphabeticallyLinus Walleij1-32/+32
Rearrange PCI GPIO controllers in alphabetic order as already indicated by the comment in the file. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-04-08gpio: arrange I2C Kconfig symbols alphabeticallyLinus Walleij1-45/+45
Rearrange the I2C GPIO expanders in alphabetic order as already indicated by the comment in the file. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-04-08gpio: arrange Kconfig symbols alphabeticallyLinus Walleij1-145/+145
This rearranges the GPIO drivers Kconfig symbols alphabetically as the top comment in the file already states they should be. No functional changes whatsoever. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-04-08gpio: ich: Implement get_direction functionAaron Sierra1-0/+6
Allow the kernel to query the driver for a GPIO's pin direction. Signed-off-by: Aaron Sierra <asierra@xes-inc.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-04-08gpio: use (!foo) instead of (foo == NULL)Varka Bhadram6-7/+7
Signed-off-by: Varka Bhadram <varkab@cdac.in> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-04-08gpio: arizona: drop owner assignment from platform_driversVarka Bhadram1-1/+0
This driver no need to set the owner field, it will be populated by driver core. Signed-off-by: Varka Bhadram <varkab@cdac.in> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-04-08gpio: max7300: remove 'ret' variableVarka Bhadram1-3/+1
Signed-off-by: Varka Bhadram <varkab@cdac.in> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-04-08gpio: use devm_kzallocVarka Bhadram2-5/+5
We can use devres API for allocating memory. No need of using kfree. Signed-off-by: Varka Bhadram <varkab@cdac.in> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-04-08gpio: sch: use uapi/linux/pci_ids.h directlyMichael S. Tsirkin1-1/+1
Header moved from linux/pci_ids.h to uapi/linux/pci_ids.h, use the new header directly so we can drop the wrapper in include/linux/pci_ids.h. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-04-08gpio: x-gene: fix devm_ioremap_resource() checkVladimir Zapolskiy1-1/+1
devm_ioremap_resource() returns IOMEM_ERR_PTR() and it never returns NULL, fix the check to prevent access to invalid virtual address. Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-04-08gpio: loongson: Add Loongson-3A/3B GPIO driver supportHuacai Chen2-20/+30
Improve Loongson-2's GPIO driver to support Loongson-3A/3B, and update Loongson-3's default config file. Acked-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Huacai Chen <chenhc@lemote.com> Reviewed-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-04-07MIPS: Move Loongson GPIO driver to drivers/gpioHuacai Chen3-0/+112
Move Loongson-2's GPIO driver to drivers/gpio and add Kconfig options. Acked-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Huacai Chen <chenhc@lemote.com> Reviewed-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-03-27gpio: Remove gpio-msm-v1 driverStephen Boyd3-723/+0
This driver is orphaned now that mach-msm has been removed. Delete it. Cc: David Brown <davidb@codeaurora.org> Cc: Bryan Huntsman <bryanh@codeaurora.org> Cc: Daniel Walker <dwalker@fifo99.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Alexandre Courbot <gnurou@gmail.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Kumar Gala <galak@codeaurora.org>
2015-03-27gpio: gpio-tb10x: remove incorrect __exit markupDmitry Torokhov1-1/+1
Even if bus is not hot-pluggable, the devices can be unbound from the driver via sysfs, so we should not be using __exit annotations on remove() methods. The only exception is drivers registered with platform_driver_probe() which specifically disables sysfs bind/unbind attributes. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-03-27gpio: syscon: reduce message level when direction reg offset not in dtGrygorii Strashko1-1/+1
Now GPIO syscon driver produces bunch of warnings during the boot of Kesytone 2 SoCs: gpio-syscon soc:keystone_dsp_gpio@02620240: can't read the dir register offset! gpio-syscon soc:keystone_dsp_gpio@2620244: can't read the dir register offset! This message unintentionally was added using dev_err(), but its actual log level is debug, because third cell of "ti,syscon-dev" is optional. Hence change it to dev_dbg() as it should be. This patch fixes commit: 5a3e3f8 ("gpio: syscon: retriave syscon node and regs offsets from dt") Reported-by: Russell King <linux@arm.linux.org.uk> Tested-by: Murali Karicheri <m-karicheri2@ti.com> Acked-by: Santosh Shilimkar <ssantosh@kernel.org> Signed-off-by: Grygorii Strashko <grygorii.strashko@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-03-27gpio: omap: get rid of GPIO_INDEX() macroGrygorii Strashko1-9/+0
Now OMAP GPIO driver prepared for GPIO_INDEX() macro removing. Do It ;) Tested-by: Tony Lindgren <tony@atomide.com> Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi> Acked-by: Santosh Shilimkar <ssantosh@kernel.org> Acked-by: Javier Martinez Canillas <javier@dowhile0.org> Signed-off-by: Grygorii Strashko <grygorii.strashko@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-03-27gpio: omap: get rid of omap_irq_to_gpio()Grygorii Strashko1-12/+5
Now OMAP GPIO driver prepared for omap_irq_to_gpio() removing. Do it ;) Tested-by: Tony Lindgren <tony@atomide.com> Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi> Acked-by: Santosh Shilimkar <ssantosh@kernel.org> Acked-by: Javier Martinez Canillas <javier@dowhile0.org> Signed-off-by: Grygorii Strashko <grygorii.strashko@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-03-27gpio: omap: get rid of GPIO_BIT() macroGrygorii Strashko1-1/+0
Now OMAP GPIO driver prepared for GPIO_BIT() macro removing. Do it ;) Tested-by: Tony Lindgren <tony@atomide.com> Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi> Acked-by: Santosh Shilimkar <ssantosh@kernel.org> Acked-by: Javier Martinez Canillas <javier@dowhile0.org> Signed-off-by: Grygorii Strashko <grygorii.strashko@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-03-27gpio: omap: convert gpio irq functions to use GPIO offsetGrygorii Strashko1-33/+34
Convert GPIO IRQ functions to use GPIO offset instead of system GPIO numbers. This allows to drop unneeded conversations between system GPIO <-> GPIO offset which are done in many places and many times. It is safe to do now because: - gpiolib always passes GPIO offset to GPIO controller - OMAP GPIO driver converted to use IRQ domain, so struct irq_data->hwirq contains GPIO offset This is preparation step before removing: #define GPIO_INDEX(bank, gpio) #define GPIO_BIT(bank, gpio) int omap_irq_to_gpio() Tested-by: Tony Lindgren <tony@atomide.com> Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi> Acked-by: Santosh Shilimkar <ssantosh@kernel.org> Acked-by: Javier Martinez Canillas <javier@dowhile0.org> Signed-off-by: Grygorii Strashko <grygorii.strashko@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-03-27gpio: omap: drop 'gpio' param from omap_gpio_init_irq()Grygorii Strashko1-7/+5
The 'gpio' parameter isn't needed any more as it duplicates 'offset' parameter, so drop it. Tested-by: Tony Lindgren <tony@atomide.com> Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi> Acked-by: Santosh Shilimkar <ssantosh@kernel.org> Acked-by: Javier Martinez Canillas <javier@dowhile0.org> Signed-off-by: Grygorii Strashko <grygorii.strashko@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-03-27gpio: omap: convert debounce functions switch to use gpio offsetGrygorii Strashko1-7/+7
Convert debounce functions to use GPIO offset instead of system GPIO numbers. This allows to drop unneeded conversations between system GPIO <-> GPIO offset which are done in many places and many times. It is safe to do now because: - gpiolib always passes GPIO offset to GPIO controller - OMAP GPIO driver converted to use IRQ domain This is preparation step before removing: #define GPIO_INDEX(bank, gpio) #define GPIO_BIT(bank, gpio) int omap_irq_to_gpio() Tested-by: Tony Lindgren <tony@atomide.com> Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi> Acked-by: Santosh Shilimkar <ssantosh@kernel.org> Acked-by: Javier Martinez Canillas <javier@dowhile0.org> Signed-off-by: Grygorii Strashko <grygorii.strashko@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-03-27gpio: omap: simplify omap_set_gpio_dataout_x()Grygorii Strashko1-5/+5
Both functions omap_set_gpio_dataout_reg() and omap_set_gpio_dataout_mask() accept GPIO offset as 'gpio' input parameter, so rename it to 'offset' and drop usage of GPIO_BIT() macro. Tested-by: Tony Lindgren <tony@atomide.com> Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi> Acked-by: Santosh Shilimkar <ssantosh@kernel.org> Acked-by: Javier Martinez Canillas <javier@dowhile0.org> Signed-off-by: Grygorii Strashko <grygorii.strashko@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-03-27gpio: omap: convert omap_gpio_is_input() to use gpio offsetGrygorii Strashko1-6/+4
Convert omap_gpio_is_input() to use GPIO offset instead of mask and, in such way, make code simpler and remove few lines of code. Tested-by: Tony Lindgren <tony@atomide.com> Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi> Acked-by: Santosh Shilimkar <ssantosh@kernel.org> Acked-by: Javier Martinez Canillas <javier@dowhile0.org> Signed-off-by: Grygorii Strashko <grygorii.strashko@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-03-27altera_gpio_probe() can be statickbuild test robot1-1/+1
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-03-26mfd: tc3589x: Enforce device-tree only modeLinus Walleij2-3/+1
All systems using the TC3589x multifunction expander uses devicetree, so don't clutter the place with a lot of and assume it is there. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-03-26gpio: rcar: Prevent module clock disable when wake-up is enabledGeert Uytterhoeven1-2/+31
When the GPIO module is needed for wake-up, it's module clock must not be disabled. Hence implement irq_chip.irq_set_wake(), which increments/decrements the clock's enable_count when needed, and forwards the wake-up state to the upstream interrupt controller. This fixes wake-up from s2ram using gpio-keys when using a PM Domain to manage the module clock. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-03-26gpio: rcar: Add more register documentationGeert Uytterhoeven1-12/+12
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-03-26gpio: rcar: Use local variable gpio_chip in gpio_rcar_probe()Geert Uytterhoeven1-3/+3
The existing variable gpio_chip already points to the gpiochip instance, hence use it everywhere. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-03-26gpio/crystalcove: Add additional GPIO for Panel controlShobhit Kumar1-1/+6
Export PANEL_EN/DISABLE (offset 0x52) as additional GPIO. Needed by display driver to enable the DSI panel on BYT platform where the Panel EN/Disable control is routed thorugh CRC PMIC CC: Samuel Ortiz <sameo@linux.intel.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Alexandre Courbot <gnurou@gmail.com> Cc: Thierry Reding <thierry.reding@gmail.com> Acked-by: Daniel Vetter <daniel@ffwll.ch> Signed-off-by: Shobhit Kumar <shobhit.kumar@intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-03-19gpio: dwapb: enable for QuarkAndy Shevchenko1-2/+1
The Intel Quark SoC contains the DW GPIO on board. While fixing the build error the commit 1972c97db5b0 (gpio: dwapb: fix compile errors) disables the possibility to build the driver on X86, i.e. Intel Quark. The patch reenables it for Intel Quark as well. Since we have Intel Quark SoC introduced in 4.0-rc1 I would like to make this fix available there as well, though the actual MFD driver [1] is applied only for next version. [1] https://lkml.org/lkml/2015/2/1/217 Fixes: 1972c97db5b0 (gpio: dwapb: fix compile errors) Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-03-19gpio / ACPI: Use local variable instead of ACPI_HANDLE()Rafael J. Wysocki1-1/+1
In acpi_gpiochip_request_interrupts() the handle local variable already contains the value that we want to pass to acpi_walk_resources(), so it is better to use that variable instead of evaluating ACPI_HANDLE() once more for the same device. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-18 17:23:13 +0000