summaryrefslogtreecommitdiff
path: root/drivers/char/ipmi
AgeCommit message (Collapse)AuthorFilesLines
2017-12-11Merge tag 'for-linus-4.15-2' of git://github.com/cminyard/linux-ipmiLinus Torvalds3-23/+30
Pull IPMI fixes from Corey Minyard. * tag 'for-linus-4.15-2' of git://github.com/cminyard/linux-ipmi: ipmi_si: fix crash on parisc ipmi_si: Fix oops with PCI devices ipmi: Stop timers before cleaning up the module
2017-12-11ipmi_si: fix crash on pariscMikulas Patocka1-0/+2
This patch fixes ipmi crash on parisc introduced in the kernel 4.15-rc. The pointer io.io_setup is not initialized and thus it causes crash in try_smi_init when attempting to call new_smi->io.io_setup. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Corey Minyard <cminyard@mvista.com>
2017-12-11ipmi_si: Fix oops with PCI devicesCorey Minyard1-2/+5
When the IPMI PCI code was split out, some code was consolidated for setting the io_setup field in the io structure. The PCI code needed this set before registration to probe register spacing, though, so restore the old code for that function. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=197999 Signed-off-by: Corey Minyard <cminyard@mvista.com> Tested-by: Meelis Roos <mroos@linux.ee>
2017-12-06ipmi: Stop timers before cleaning up the moduleMasamitsu Yamazaki1-21/+23
System may crash after unloading ipmi_si.ko module because a timer may remain and fire after the module cleaned up resources. cleanup_one_si() contains the following processing. /* * Make sure that interrupts, the timer and the thread are * stopped and will not run again. */ if (to_clean->irq_cleanup) to_clean->irq_cleanup(to_clean); wait_for_timer_and_thread(to_clean); /* * Timeouts are stopped, now make sure the interrupts are off * in the BMC. Note that timers and CPU interrupts are off, * so no need for locks. */ while (to_clean->curr_msg || (to_clean->si_state != SI_NORMAL)) { poll(to_clean); schedule_timeout_uninterruptible(1); } si_state changes as following in the while loop calling poll(to_clean). SI_GETTING_MESSAGES => SI_CHECKING_ENABLES => SI_SETTING_ENABLES => SI_GETTING_EVENTS => SI_NORMAL As written in the code comments above, timers are expected to stop before the polling loop and not to run again. But the timer is set again in the following process when si_state becomes SI_SETTING_ENABLES. => poll => smi_event_handler => handle_transaction_done // smi_info->si_state == SI_SETTING_ENABLES => start_getting_events => start_new_msg => smi_mod_timer => mod_timer As a result, before the timer set in start_new_msg() expires, the polling loop may see si_state becoming SI_NORMAL and the module clean-up finishes. For example, hard LOCKUP and panic occurred as following. smi_timeout was called after smi_event_handler, kcs_event and hangs at port_inb() trying to access I/O port after release. [exception RIP: port_inb+19] RIP: ffffffffc0473053 RSP: ffff88069fdc3d80 RFLAGS: 00000006 RAX: ffff8806800f8e00 RBX: ffff880682bd9400 RCX: 0000000000000000 RDX: 0000000000000ca3 RSI: 0000000000000ca3 RDI: ffff8806800f8e40 RBP: ffff88069fdc3d80 R8: ffffffff81d86dfc R9: ffffffff81e36426 R10: 00000000000509f0 R11: 0000000000100000 R12: 0000000000]:000000 R13: 0000000000000000 R14: 0000000000000246 R15: ffff8806800f8e00 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0000 --- <NMI exception stack> --- To fix the problem I defined a flag, timer_can_start, as member of struct smi_info. The flag is enabled immediately after initializing the timer and disabled immediately before waiting for timer deletion. Fixes: 0cfec916e86d ("ipmi: Start the timer and thread on internal msgs") Signed-off-by: Yamazaki Masamitsu <m-yamazaki@ah.jp.nec.com> [Adjusted for recent changes in the driver.] Signed-off-by: Corey Minyard <cminyard@mvista.com>
2017-11-21treewide: setup_timer() -> timer_setup()Kees Cook4-13/+11
This converts all remaining cases of the old setup_timer() API into using timer_setup(), where the callback argument is the structure already holding the struct timer_list. These should have no behavioral changes, since they just change which pointer is passed into the callback with the same available pointers after conversion. It handles the following examples, in addition to some other variations. Casting from unsigned long: void my_callback(unsigned long data) { struct something *ptr = (struct something *)data; ... } ... setup_timer(&ptr->my_timer, my_callback, ptr); and forced object casts: void my_callback(struct something *ptr) { ... } ... setup_timer(&ptr->my_timer, my_callback, (unsigned long)ptr); become: void my_callback(struct timer_list *t) { struct something *ptr = from_timer(ptr, t, my_timer); ... } ... timer_setup(&ptr->my_timer, my_callback, 0); Direct function assignments: void my_callback(unsigned long data) { struct something *ptr = (struct something *)data; ... } ... ptr->my_timer.function = my_callback; have a temporary cast added, along with converting the args: void my_callback(struct timer_list *t) { struct something *ptr = from_timer(ptr, t, my_timer); ... } ... ptr->my_timer.function = (TIMER_FUNC_TYPE)my_callback; And finally, callbacks without a data assignment: void my_callback(unsigned long data) { ... } ... setup_timer(&ptr->my_timer, my_callback, 0); have their argument renamed to verify they're unused during conversion: void my_callback(struct timer_list *unused) { ... } ... timer_setup(&ptr->my_timer, my_callback, 0); The conversion is done with the following Coccinelle script: spatch --very-quiet --all-includes --include-headers \ -I ./arch/x86/include -I ./arch/x86/include/generated \ -I ./include -I ./arch/x86/include/uapi \ -I ./arch/x86/include/generated/uapi -I ./include/uapi \ -I ./include/generated/uapi --include ./include/linux/kconfig.h \ --dir . \ --cocci-file ~/src/data/timer_setup.cocci @fix_address_of@ expression e; @@ setup_timer( -&(e) +&e , ...) // Update any raw setup_timer() usages that have a NULL callback, but // would otherwise match change_timer_function_usage, since the latter // will update all function assignments done in the face of a NULL // function initialization in setup_timer(). @change_timer_function_usage_NULL@ expression _E; identifier _timer; type _cast_data; @@ ( -setup_timer(&_E->_timer, NULL, _E); +timer_setup(&_E->_timer, NULL, 0); | -setup_timer(&_E->_timer, NULL, (_cast_data)_E); +timer_setup(&_E->_timer, NULL, 0); | -setup_timer(&_E._timer, NULL, &_E); +timer_setup(&_E._timer, NULL, 0); | -setup_timer(&_E._timer, NULL, (_cast_data)&_E); +timer_setup(&_E._timer, NULL, 0); ) @change_timer_function_usage@ expression _E; identifier _timer; struct timer_list _stl; identifier _callback; type _cast_func, _cast_data; @@ ( -setup_timer(&_E->_timer, _callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, &_callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, _callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, &_callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)_callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)&_callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)_callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)&_callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E._timer, _callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, _callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, &_callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, &_callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)_callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)_callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)&_callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)&_callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | _E->_timer@_stl.function = _callback; | _E->_timer@_stl.function = &_callback; | _E->_timer@_stl.function = (_cast_func)_callback; | _E->_timer@_stl.function = (_cast_func)&_callback; | _E._timer@_stl.function = _callback; | _E._timer@_stl.function = &_callback; | _E._timer@_stl.function = (_cast_func)_callback; | _E._timer@_stl.function = (_cast_func)&_callback; ) // callback(unsigned long arg) @change_callback_handle_cast depends on change_timer_function_usage@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _origtype; identifier _origarg; type _handletype; identifier _handle; @@ void _callback( -_origtype _origarg +struct timer_list *t ) { ( ... when != _origarg _handletype *_handle = -(_handletype *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg | ... when != _origarg _handletype *_handle = -(void *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg | ... when != _origarg _handletype *_handle; ... when != _handle _handle = -(_handletype *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg | ... when != _origarg _handletype *_handle; ... when != _handle _handle = -(void *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg ) } // callback(unsigned long arg) without existing variable @change_callback_handle_cast_no_arg depends on change_timer_function_usage && !change_callback_handle_cast@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _origtype; identifier _origarg; type _handletype; @@ void _callback( -_origtype _origarg +struct timer_list *t ) { + _handletype *_origarg = from_timer(_origarg, t, _timer); + ... when != _origarg - (_handletype *)_origarg + _origarg ... when != _origarg } // Avoid already converted callbacks. @match_callback_converted depends on change_timer_function_usage && !change_callback_handle_cast && !change_callback_handle_cast_no_arg@ identifier change_timer_function_usage._callback; identifier t; @@ void _callback(struct timer_list *t) { ... } // callback(struct something *handle) @change_callback_handle_arg depends on change_timer_function_usage && !match_callback_converted && !change_callback_handle_cast && !change_callback_handle_cast_no_arg@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _handletype; identifier _handle; @@ void _callback( -_handletype *_handle +struct timer_list *t ) { + _handletype *_handle = from_timer(_handle, t, _timer); ... } // If change_callback_handle_arg ran on an empty function, remove // the added handler. @unchange_callback_handle_arg depends on change_timer_function_usage && change_callback_handle_arg@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _handletype; identifier _handle; identifier t; @@ void _callback(struct timer_list *t) { - _handletype *_handle = from_timer(_handle, t, _timer); } // We only want to refactor the setup_timer() data argument if we've found // the matching callback. This undoes changes in change_timer_function_usage. @unchange_timer_function_usage depends on change_timer_function_usage && !change_callback_handle_cast && !change_callback_handle_cast_no_arg && !change_callback_handle_arg@ expression change_timer_function_usage._E; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type change_timer_function_usage._cast_data; @@ ( -timer_setup(&_E->_timer, _callback, 0); +setup_timer(&_E->_timer, _callback, (_cast_data)_E); | -timer_setup(&_E._timer, _callback, 0); +setup_timer(&_E._timer, _callback, (_cast_data)&_E); ) // If we fixed a callback from a .function assignment, fix the // assignment cast now. @change_timer_function_assignment depends on change_timer_function_usage && (change_callback_handle_cast || change_callback_handle_cast_no_arg || change_callback_handle_arg)@ expression change_timer_function_usage._E; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type _cast_func; typedef TIMER_FUNC_TYPE; @@ ( _E->_timer.function = -_callback +(TIMER_FUNC_TYPE)_callback ; | _E->_timer.function = -&_callback +(TIMER_FUNC_TYPE)_callback ; | _E->_timer.function = -(_cast_func)_callback; +(TIMER_FUNC_TYPE)_callback ; | _E->_timer.function = -(_cast_func)&_callback +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -_callback +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -&_callback; +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -(_cast_func)_callback +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -(_cast_func)&_callback +(TIMER_FUNC_TYPE)_callback ; ) // Sometimes timer functions are called directly. Replace matched args. @change_timer_function_calls depends on change_timer_function_usage && (change_callback_handle_cast || change_callback_handle_cast_no_arg || change_callback_handle_arg)@ expression _E; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type _cast_data; @@ _callback( ( -(_cast_data)_E +&_E->_timer | -(_cast_data)&_E +&_E._timer | -_E +&_E->_timer ) ) // If a timer has been configured without a data argument, it can be // converted without regard to the callback argument, since it is unused. @match_timer_function_unused_data@ expression _E; identifier _timer; identifier _callback; @@ ( -setup_timer(&_E->_timer, _callback, 0); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, _callback, 0L); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, _callback, 0UL); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E._timer, _callback, 0); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, _callback, 0L); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, _callback, 0UL); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_timer, _callback, 0); +timer_setup(&_timer, _callback, 0); | -setup_timer(&_timer, _callback, 0L); +timer_setup(&_timer, _callback, 0); | -setup_timer(&_timer, _callback, 0UL); +timer_setup(&_timer, _callback, 0); | -setup_timer(_timer, _callback, 0); +timer_setup(_timer, _callback, 0); | -setup_timer(_timer, _callback, 0L); +timer_setup(_timer, _callback, 0); | -setup_timer(_timer, _callback, 0UL); +timer_setup(_timer, _callback, 0); ) @change_callback_unused_data depends on match_timer_function_unused_data@ identifier match_timer_function_unused_data._callback; type _origtype; identifier _origarg; @@ void _callback( -_origtype _origarg +struct timer_list *unused ) { ... when != _origarg } Signed-off-by: Kees Cook <keescook@chromium.org>
2017-11-17Merge branch 'misc.compat' of ↵Linus Torvalds1-6/+0
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull compat and uaccess updates from Al Viro: - {get,put}_compat_sigset() series - assorted compat ioctl stuff - more set_fs() elimination - a few more timespec64 conversions - several removals of pointless access_ok() in places where it was followed only by non-__ variants of primitives * 'misc.compat' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (24 commits) coredump: call do_unlinkat directly instead of sys_unlink fs: expose do_unlinkat for built-in callers ext4: take handling of EXT4_IOC_GROUP_ADD into a helper, get rid of set_fs() ipmi: get rid of pointless access_ok() pi433: sanitize ioctl cxlflash: get rid of pointless access_ok() mtdchar: get rid of pointless access_ok() r128: switch compat ioctls to drm_ioctl_kernel() selection: get rid of field-by-field copyin VT_RESIZEX: get rid of field-by-field copyin i2c compat ioctls: move to ->compat_ioctl() sched_rr_get_interval(): move compat to native, get rid of set_fs() mips: switch to {get,put}_compat_sigset() sparc: switch to {get,put}_compat_sigset() s390: switch to {get,put}_compat_sigset() ppc: switch to {get,put}_compat_sigset() parisc: switch to {get,put}_compat_sigset() get_compat_sigset() get rid of {get,put}_compat_itimerspec() io_getevents: Use timespec64 to represent timeouts ...
2017-11-15Merge tag 'ipmi-for-4.15' of git://github.com/cminyard/linux-ipmiLinus Torvalds19-2201/+2987
Pull IPMI updates from Corey Minyard: "This is a fairly large rework of the IPMI code, along with a bunch of smaller fixes. The major changes have been in the next tree for a couple of months, so they should be good to do in. - Some users had IPMI systems where the GUID of the IPMI controller could change. So rescanning of the GUID was added. The naming of some sysfs things was dependent on the GUID, however, so this resulted in the sysfs interface code in IPMI changing to remove that dependency and name the IPMI BMCs like other sysfs devices. - The ipmi_si_intf.c code was fairly bloated with all the different discovery methods (PCI, ACPI, SMBIOS, OF, platform, module parameters, hot add). The structure of how the interfaces were added was redone to make them more modular, then the individual methods were pulled out into their own files" * tag 'ipmi-for-4.15' of git://github.com/cminyard/linux-ipmi: (48 commits) ipmi_si: Delete an error message for a failed memory allocation in try_smi_init() ipmi_si: fix memory leak on new_smi ipmi: remove redundant initialization of bmc ipmi: pr_err() strings should end with newlines ipmi: Clean up some print operations ipmi: Make the DMI probe into a generic platform probe ipmi: Make the IPMI proc interface configurable ipmi_ssif: Add device attrs for the things in proc ipmi_si: Add device attrs for the things in proc ipmi_si: remove ipmi_smi_alloc() function ipmi_si: Move port and mem I/O handling to their own files ipmi_si: Get rid of unused spacing and port fields ipmi_si: Move PARISC handling to another file ipmi_si: Move PCI setup to another file ipmi_si: Move platform device handling to another file ipmi_si: Move hardcode handling to a separate file. ipmi_si: Move the hotmod handling to another file. ipmi_si: Change ipmi_si_add_smi() to take just I/O info ipmi_si: Move io setup into io structure ipmi_si: Move irq setup handling into the io struct ...
2017-11-15Merge tag 'modules-for-v4.15' of ↵Linus Torvalds2-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux Pull module updates from Jessica Yu: "Summary of modules changes for the 4.15 merge window: - treewide module_param_call() cleanup, fix up set/get function prototype mismatches, from Kees Cook - minor code cleanups" * tag 'modules-for-v4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux: module: Do not paper over type mismatches in module_param_call() treewide: Fix function prototypes for module_param_call() module: Prepare to convert all module_param_call() prototypes kernel/module: Delete an error message for a failed memory allocation in add_module_usage()
2017-11-10ipmi: get rid of pointless access_ok()Al Viro1-6/+0
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-11-02Merge branch 'modules-next' of ↵Corey Minyard2-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux into for-next The IPMI SI driver was split into different pieces, merge the module tree to accountfor that. Signed-off-by: Corey Minyard <cminyard@mvista.com>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman3-0/+3
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-31treewide: Fix function prototypes for module_param_call()Kees Cook2-3/+3
Several function prototypes for the set/get functions defined by module_param_call() have a slightly wrong argument types. This fixes those in an effort to clean up the calls when running under type-enforced compiler instrumentation for CFI. This is the result of running the following semantic patch: @match_module_param_call_function@ declarer name module_param_call; identifier _name, _set_func, _get_func; expression _arg, _mode; @@ module_param_call(_name, _set_func, _get_func, _arg, _mode); @fix_set_prototype depends on match_module_param_call_function@ identifier match_module_param_call_function._set_func; identifier _val, _param; type _val_type, _param_type; @@ int _set_func( -_val_type _val +const char * _val , -_param_type _param +const struct kernel_param * _param ) { ... } @fix_get_prototype depends on match_module_param_call_function@ identifier match_module_param_call_function._get_func; identifier _val, _param; type _val_type, _param_type; @@ int _get_func( -_val_type _val +char * _val , -_param_type _param +const struct kernel_param * _param ) { ... } Two additional by-hand changes are included for places where the above Coccinelle script didn't notice them: drivers/platform/x86/thinkpad_acpi.c fs/lockd/svc.c Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Jessica Yu <jeyu@kernel.org>
2017-10-17ipmi_si: Delete an error message for a failed memory allocation in ↵Markus Elfring1-1/+0
try_smi_init() Omit an extra message for a memory allocation failure in this function. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Corey Minyard <cminyard@mvista.com>
2017-10-17ipmi_si: fix memory leak on new_smiColin Ian King1-0/+1
The error exit path omits kfree'ing the allocated new_smi, causing a memory leak. Fix this by kfree'ing new_smi. Detected by CoverityScan, CID#14582571 ("Resource Leak") Fixes: 7e030d6dff71 ("ipmi: Prefer ACPI system interfaces over SMBIOS ones") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Corey Minyard <cminyard@mvista.com>
2017-09-28ipmi: remove redundant initialization of bmcColin Ian King1-1/+1
The pointer bmc is being initialized and this initialized value is never being read, so this is assignment redundant and can be removed. Cleans up clang warning: warning: Value stored to 'bmc' during its initialization is never read Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Corey Minyard <cminyard@mvista.com>
2017-09-28ipmi: pr_err() strings should end with newlinesArvind Yadav1-3/+3
pr_err() messages should terminated with a new-line to avoid other messages being concatenated onto the end. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Corey Minyard <cminyard@mvista.com>
2017-09-28ipmi: Clean up some print operationsCorey Minyard1-56/+45
Get rid of all printfs, using dev_xxx() if a device is available, pr_xxx() otherwise, and format long strings properly. Signed-off-by: Corey Minyard <cminyard@mvista.com>
2017-09-28ipmi: Make the DMI probe into a generic platform probeCorey Minyard7-94/+103
Rework the DMI probe function to be a generic platform probe, and then rework the DMI code (and a few other things) to use the more generic information. This is so other things can declare platform IPMI devices. Signed-off-by: Corey Minyard <cminyard@mvista.com>
2017-09-28ipmi: Make the IPMI proc interface configurableCorey Minyard4-21/+40
So we can remove it later. Signed-off-by: Corey Minyard <cminyard@mvista.com>
2017-09-28ipmi_ssif: Add device attrs for the things in procCorey Minyard1-2/+74
Create a device attribute for everything we show in proc, getting ready for removing the proc stuff. Signed-off-by: Corey Minyard <cminyard@mvista.com>
2017-09-28ipmi_si: Add device attrs for the things in procCorey Minyard1-1/+103
Create a device attribute for everything we show in proc, getting ready for removing the proc stuff. Signed-off-by: Corey Minyard <cminyard@mvista.com>
2017-09-28ipmi_si: remove ipmi_smi_alloc() functionCorey Minyard1-10/+2
It's only used in one place now, so it's overkill. Signed-off-by: Corey Minyard <cminyard@mvista.com>
2017-09-28ipmi_si: Move port and mem I/O handling to their own filesCorey Minyard5-255/+263
Signed-off-by: Corey Minyard <cminyard@mvista.com>
2017-09-28ipmi_si: Get rid of unused spacing and port fieldsCorey Minyard1-10/+0
Signed-off-by: Corey Minyard <cminyard@mvista.com>
2017-09-28ipmi_si: Move PARISC handling to another fileCorey Minyard4-57/+71
Signed-off-by: Corey Minyard <cminyard@mvista.com>
2017-09-28ipmi_si: Move PCI setup to another fileCorey Minyard4-161/+179
Signed-off-by: Corey Minyard <cminyard@mvista.com> Stephen Rothwell <sfr@canb.auug.org.au> fixed an issue with the include files
2017-09-28ipmi_si: Move platform device handling to another fileCorey Minyard4-589/+613
Signed-off-by: Corey Minyard <cminyard@mvista.com> Stephen Rothwell <sfr@canb.auug.org.au> fixed an issue with the include files
2017-09-27ipmi_si: Move hardcode handling to a separate file.Corey Minyard4-147/+154
Signed-off-by: Corey Minyard <cminyard@mvista.com>
2017-09-27ipmi_si: Move the hotmod handling to another file.Corey Minyard4-244/+264
Signed-off-by: Corey Minyard <cminyard@mvista.com>
2017-09-27ipmi_si: Change ipmi_si_add_smi() to take just I/O infoCorey Minyard3-309/+229
Instead of allocating the smi_info structure, filling in the I/O info, and passing it to ipmi_si_add_smi(), just pass the I/O info in the io structure and let ipmi_si_add_smi() allocate the smi_info structure. This required redoing the way the remove functions for some device interfaces worked, a new function named ipmi_si_remove_by_dev() allows the device to be passed in and detected instead of using driver data, which couldn't be filled out easily othersize. After this the platform handling should be decoupled from the smi_info structure and that handling can be pulled out to its own files. Signed-off-by: Corey Minyard <cminyard@mvista.com>
2017-09-27ipmi_si: Move io setup into io structureCorey Minyard2-92/+85
Where it belongs, and getting ready for pulling the platform handling into its own file. Signed-off-by: Corey Minyard <cminyard@mvista.com>
2017-09-27ipmi_si: Move irq setup handling into the io structCorey Minyard3-81/+82
So the platform code can do it without having to access the smi info, getting ready for pulling the platform handling section to their own files. Signed-off-by: Corey Minyard <cminyard@mvista.com>
2017-09-27ipmi_si: Move some platform data into the io structureCorey Minyard2-216/+213
That's where it belongs, and we are getting ready for moving the platform handling out of the main ipmi_si_intf.c file. Signed-off-by: Corey Minyard <cminyard@mvista.com>
2017-09-27ipmi_si: Rename function to add smi, make it globalCorey Minyard2-16/+28
Getting ready for moving the platform-specific stuff into their own files. Signed-off-by: Corey Minyard <cminyard@mvista.com>
2017-09-27ipmi: Convert IPMI GUID over to Linux guid_tCorey Minyard1-27/+23
Signed-off-by: Corey Minyard <cminyard@mvista.com>
2017-09-27ipmi: Rescan channel list on BMC changesCorey Minyard1-58/+111
If the BMC changes versions or a change is otherwise detected, rescan the channels on the BMC. Signed-off-by: Corey Minyard <cminyard@mvista.com>
2017-09-27ipmi: Move lun and address out of channel structCorey Minyard1-22/+25
Put it in it's own struct, getting ready for channel information being dynamically changed. Signed-off-by: Corey Minyard <cminyard@mvista.com>
2017-09-27ipmi: Retry BMC registration on a failureCorey Minyard1-1/+23
If the BMC fails to register, just set up to retry periodically. Signed-off-by: Corey Minyard <cminyard@mvista.com>
2017-09-27ipmi: Rework device id and guid handling to catch changing BMCsCorey Minyard1-73/+167
A BMC's guid or device id info may change dynamically, this could result in a different configuration that needs to be done. Adjust the BMCs dynamically. Signed-off-by: Corey Minyard <cminyard@mvista.com>
2017-09-27ipmi: Use a temporary BMC for an interfaceCorey Minyard1-9/+13
This is getting ready for the ability to redo the BMC if it's information changes, we need a fallback mechanism. Signed-off-by: Corey Minyard <cminyard@mvista.com>
2017-09-27ipmi: Dynamically fetch GUID periodicallyCorey Minyard1-19/+42
This will catch if the GUID changes. Signed-off-by: Corey Minyard <cminyard@mvista.com>
2017-09-27ipmi: Always fetch the guid through ipmi_get_device_id()Corey Minyard1-28/+65
This is in preparation for making ipmi_get_device_id() dynamically return the guid and device id. Signed-off-by: Corey Minyard <cminyard@mvista.com>
2017-09-27ipmi: Remove the device id from ipmi_register_smi()Corey Minyard4-24/+1
It's no longer used, dynamic device id handling is in place now. Signed-off-by: Corey Minyard <cminyard@mvista.com>
2017-09-27ipmi: allow dynamic BMC version informationJeremy Kerr1-15/+190
Currently, it's up to the IPMI SMIs to provide the product & version details of BMCs behind registered IPMI SMI interfaces. This device ID is provided on SMI regsitration, and kept around for all future queries. However, this version information isn't always static. For example, a BMC may be upgraded at runtime, making the old version information stale. This change allows querying the BMC device ID & version information dynamically. If no static device_id argument is provided to ipmi_register_smi, then the IPMI core code will perform a Get Device ID IPMI command to query the version information when needed. We keep a short-term cache of this information so we don't need to re-query for every attribute access. Signed-off-by: Jeremy Kerr <jk@ozlabs.org> I basically rewrote this, I fixed some locking issues and simplified things. Same functional change, though. Signed-off-by: Corey Minyard <cminyard@mvista.com>
2017-09-27ipmi: Don't use BMC product/dev ids in the BMC nameCorey Minyard1-35/+10
There are a lot of bad things that a set of BMCs could do that would really confuse the IPMI driver; it's possible for BMCs with different GUIDs to have the same product/devid (though that's not technically legal), which would result in platform device namespace collisions. Fixing it would involve either using the GUID in the BMC name, which resulted in huge names, or just using an ida for numbering the BMCs. The latter approach was chosen to avoid the huge names. Signed-off-by: Corey Minyard <cminyard@mvista.com>
2017-09-27ipmi: Make ipmi_demangle_device_id more genericJeremy Kerr2-2/+4
Currently, ipmi_demagle_device_id requires a full response buffer in its data argument. This means we can't use it to parse a response in a struct ipmi_recv_msg, which has the netfn and cmd as separate bytes. This change alters the definition and users of ipmi_demangle_device_id to use a split netfn, cmd and data buffer, so it can be used with non-sequential responses. Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Fixed the ipmi_ssif.c and ipmi_si_intf.c changes to use data from the response, not the data from the message, when passing info to the ipmi_demangle_device_id() function. Signed-off-by: Corey Minyard <cminyard@mvista.com>
2017-09-27ipmi: Add a reference from BMC devices to their interfacesJeremy Kerr1-0/+11
In an upcoming change, we'll want to grab a reference to the ipmi_smi_t from a struct bmc_device. This change adds a pointer to allow this. Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Reworked to support multiple interfaces on a BMC. Signed-off-by: Corey Minyard <cminyard@mvista.com>
2017-09-27ipmi: Get the device id through a functionCorey Minyard2-39/+127
This makes getting the device id consistent, and make it possible to add a function to fetch it dynamically later. Signed-off-by: Corey Minyard <cminyard@mvista.com>
2017-09-27ipmi: Fix printing the BMC guidCorey Minyard1-3/+6
It was just wrong. Make it print according to the guid spec. Signed-off-by: Corey Minyard <cminyard@mvista.com>
2017-09-27ipmi: Rework BMC registrationCorey Minyard1-23/+45
There was a certain error case where the BMC wouldn't be deregistered like it should be. Rework the BMC registration to make calling ipmi_bmc_unregister() ok even if it's not registered and to clean up the error handling for ipmi_bmc_register(). Signed-off-by: Corey Minyard <cminyard@mvista.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-15 20:46:49 +0000