summaryrefslogtreecommitdiff
path: root/drivers/acpi/Kconfig
AgeCommit message (Collapse)AuthorFilesLines
2019-08-16ia64: remove support for machvecsChristoph Hellwig1-1/+1
The only thing remaining of the machvecs is a few checks if we are running on an SGI UV system. Replace those with the existing is_uv_system() check that has been rewritten to simply check the OEM ID directly. That leaves us with a generic kernel that is as fast as the previous DIG/ZX1/UV kernels, but can support all hardware. Support for UV and the HP SBA IOMMU is now optional based on new config options. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lkml.kernel.org/r/20190813072514.23299-27-hch@lst.de Signed-off-by: Tony Luck <tony.luck@intel.com>
2019-08-16ia64: remove support for the SGI SN2 platformChristoph Hellwig1-1/+1
The SGI SN2 (early Altix) is a very non-standard IA64 platform that was at the very high end of even IA64 hardware, and has been discontinued a long time ago. Remove it because there no upstream users left, and it has magic hooks all over the kernel. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lkml.kernel.org/r/20190813072514.23299-16-hch@lst.de Signed-off-by: Tony Luck <tony.luck@intel.com>
2019-07-09Merge tag 'docs-5.3' of git://git.lwn.net/linuxLinus Torvalds1-5/+5
Pull Documentation updates from Jonathan Corbet: "It's been a relatively busy cycle for docs: - A fair pile of RST conversions, many from Mauro. These create more than the usual number of simple but annoying merge conflicts with other trees, unfortunately. He has a lot more of these waiting on the wings that, I think, will go to you directly later on. - A new document on how to use merges and rebases in kernel repos, and one on Spectre vulnerabilities. - Various improvements to the build system, including automatic markup of function() references because some people, for reasons I will never understand, were of the opinion that :c:func:``function()`` is unattractive and not fun to type. - We now recommend using sphinx 1.7, but still support back to 1.4. - Lots of smaller improvements, warning fixes, typo fixes, etc" * tag 'docs-5.3' of git://git.lwn.net/linux: (129 commits) docs: automarkup.py: ignore exceptions when seeking for xrefs docs: Move binderfs to admin-guide Disable Sphinx SmartyPants in HTML output doc: RCU callback locks need only _bh, not necessarily _irq docs: format kernel-parameters -- as code Doc : doc-guide : Fix a typo platform: x86: get rid of a non-existent document Add the RCU docs to the core-api manual Documentation: RCU: Add TOC tree hooks Documentation: RCU: Rename txt files to rst Documentation: RCU: Convert RCU UP systems to reST Documentation: RCU: Convert RCU linked list to reST Documentation: RCU: Convert RCU basic concepts to reST docs: filesystems: Remove uneeded .rst extension on toctables scripts/sphinx-pre-install: fix out-of-tree build docs: zh_CN: submitting-drivers.rst: Remove a duplicated Documentation/ Documentation: PGP: update for newer HW devices Documentation: Add section about CPU vulnerabilities for Spectre Documentation: platform: Delete x86-laptop-drivers.txt docs: Note that :c:func: should no longer be used ...
2019-06-22ACPI: Make AC and battery drivers available on !X86Ard Biesheuvel1-2/+0
ACPI battery and AC devices can be found in arm64 laptops as well, so drop the Kconfig dependency on X86 for their drivers. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Tested-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-06-08docs: fix broken documentation linksMauro Carvalho Chehab1-5/+5
Mostly due to x86 and acpi conversion, several documentation links are still pointing to the old file. Fix them. Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Reviewed-by: Wolfram Sang <wsa@the-dreams.de> Reviewed-by: Sven Van Asbroeck <TheSven73@gmail.com> Reviewed-by: Bhupesh Sharma <bhsharma@redhat.com> Acked-by: Mark Brown <broonie@kernel.org> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2019-04-04acpi/hmat: Parse and report heterogeneous memoryKeith Busch1-0/+1
Systems may provide different memory types and export this information in the ACPI Heterogeneous Memory Attribute Table (HMAT). Parse these tables provided by the platform and report the memory access and caching attributes to the kernel messages. Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Tested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Keith Busch <keith.busch@intel.com> Tested-by: Brice Goglin <Brice.Goglin@inria.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-14ACPI / tables: table override from built-in initrdShunyong Yang1-0/+10
In some scenario, we need to build initrd with kernel in a single image. This can simplify system deployment process by downloading the whole system once, such as in IC verification. This patch adds support to override ACPI tables from built-in initrd. Signed-off-by: Shunyong Yang <shunyong.yang@hxt-semitech.com> [ rjw: Minor cleanups ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-01-02ACPI: Fix build failure when CONFIG_NLS is set to 'n'Sinan Kaya1-0/+1
Observing link failure as follows when CONFIG_ACPI is set but both CONFIG_NLS and CONFIG_PCI are no set: drivers/acpi/device_sysfs.o: In function `description_show': device_sysfs.c:(.text+0x48a): undefined reference to `utf16s_to_utf8s' This issue was previously addressed implicitly by commit 8a226e00eeed (PCI: pci-label: Fix build failure when CONFIG_NLS is set to 'm' by allmodconfig) causing PCI_LABEL to be selected when ACPI was set which caused NLS to be selected too in that case. However, after commit 5d32a66541c46 (PCI/ACPI: Allow ACPI to be built without CONFIG_PCI set) it is possible to build ACPI support without PCI, so make ACPI select NLS directly to cover that case. Fixes: 5d32a66541c46 (PCI/ACPI: Allow ACPI to be built without CONFIG_PCI set) Signed-off-by: Sinan Kaya <okaya@kernel.org> [ rjw: Changelog ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-12-21Merge branch 'acpi-pci'Rafael J. Wysocki1-2/+1
* acpi-pci: ACPI: Make PCI slot detection driver depend on PCI ACPI/IORT: Stub out ACS functions when CONFIG_PCI is not set arm64: select ACPI PCI code only when both features are enabled PCI/ACPI: Allow ACPI to be built without CONFIG_PCI set ACPICA: Remove PCI bits from ACPICA when CONFIG_PCI is unset ACPI: Allow CONFIG_PCI to be unset for reboot ACPI: Move PCI reset to a separate function
2018-12-20ACPI: Make PCI slot detection driver depend on PCISinan Kaya1-1/+1
Since this is ACPI PCI slot detection driver for PCI, it doesn't make sense to compile this without PCI support in place. Signed-off-by: Sinan Kaya <okaya@kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-12-20PCI/ACPI: Allow ACPI to be built without CONFIG_PCI setSinan Kaya1-1/+0
We are compiling PCI code today for systems with ACPI and no PCI device present. Remove the useless code and reduce the tight dependency. Signed-off-by: Sinan Kaya <okaya@kernel.org> Acked-by: Bjorn Helgaas <bhelgaas@google.com> # PCI parts Acked-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-12-13ACPI / tables: add DSDT AmlCode new declaration name supportWang Dongsheng1-1/+1
A new naming rule was added in ACPICA version 20180427 changing the DSDT AML code name from "AmlCode" to "dsdt_aml_code". That change was made by commit 83b2fa943ba8 "ACPICA: iASL: Enhance the -tc option (create AML hex file in C)". Tested: ACPICA release version 20180427+. ARM64: QCOM QDF2400 GCC: 4.8.5 20150623 Signed-off-by: Wang Dongsheng <dongsheng.wang@hxt-semitech.com> [ rjw: Changelog ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-11-08ACPI / PMIC: xpower: fix IOSF_MBI dependencyArnd Bergmann1-1/+1
We still get a link failure with IOSF_MBI=m when the xpower driver is built-in: drivers/acpi/pmic/intel_pmic_xpower.o: In function `intel_xpower_pmic_update_power': intel_pmic_xpower.c:(.text+0x4f2): undefined reference to `iosf_mbi_block_punit_i2c_access' intel_pmic_xpower.c:(.text+0x5e2): undefined reference to `iosf_mbi_unblock_punit_i2c_access' This makes the dependency stronger, so we can only build when IOSF_MBI is built-in. Fixes: 6a9b593d4b6f (ACPI / PMIC: xpower: Add depends on IOSF_MBI to Kconfig entry) Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-25ACPI / PMIC: xpower: Add depends on IOSF_MBI to Kconfig entryHans de Goede1-1/+1
This is necessary to avoid compilation issues on non x86 systems (where the asm/iosf_mbi.h header is not available) and on x86 systems in case IOSF_MBI support is not enabled there. Note that the AXP288 PMIC is connected through the LPSS i2c controller, so either we have IOSF_MBI support selected through the X86_INTEL_LPSS option, or we have a kernel where the OpRegion will never work anyways. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-25Merge tag 'edac_for_4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bpLinus Torvalds1-0/+3
Pull EDAC updates from Borislav Petkov: "The EDAC tree was busier than usual this cycle as the shortlog below shows. Also, this pull request is carrying an ACPI DSM driver which is used to ask the platform to supply the DIMM location of a reported hardware error and thus simplify all the EDAC logic when trying to map the error address to the respective DIMM. Core EDAC updates: - amd64_edac: AMD family 0x17, models 0x10-0x2f support (Michael Jin) Hygon Dhyana support (Pu Wen) - sb_edac: New maintainer + fixes (Tony Luck) Error reporting improvements and fixes (Qiuxu Zhuo) - ghes_edac: SMBIOS handle type 17 for DIMM locating and per-DIMM error accounting (Fan Wu) - altera_edac: Stratix10 support and refactoring (Thor Thayer) Out of tree addition: - acpi_adxl: Address Translation interface using an ACPI DSM (Tony Luck) - the usual amount of other misc fixes and cleanups all over" * tag 'edac_for_4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp: (22 commits) ACPI/ADXL: Add address translation interface using an ACPI DSM EDAC, thunderx: Fix memory leak in thunderx_l2c_threaded_isr() EDAC, skx_edac: Fix logical channel intermediate decoding EDAC, {i7core,sb,skx}_edac: Fix uncorrected error counting EDAC, altera: Work around int-to-pointer-cast warnings EDAC, amd64: Add Hygon Dhyana support EDAC: Raise the maximum number of memory controllers arm64: dts: stratix10: Add peripheral EDAC nodes EDAC, altera: Add Stratix10 peripheral support EDAC, altera: Merge Stratix10 into the Arria10 SDRAM probe routine arm64: dts: stratix10: Add SDRAM node EDAC, altera: Combine Stratix10 and Arria10 probe functions arm64: dts: stratix10: Additions to EDAC System Manager EDAC, i7core: Remove set but not used variable pvt EDAC, ghes: Use CPER module handles to locate DIMMs EDAC: Correct DIMM capacity unit symbol EDAC, sb_edac: Fix signedness bugs in *_get_ha() functions EDAC, sb_edac: Fix reporting for patrol scrubber errors EDAC, sb_edac: Return early on ADDRV bit and address type test MAINTAINERS: Update maintainer for drivers/edac/sb_edac.c ...
2018-10-16ACPI/ADXL: Add address translation interface using an ACPI DSMTony Luck1-0/+3
Some new Intel servers provide an interface so that the OS can ask the BIOS to translate a system physical address to a memory address (socket, memory controller, channel, rank, dimm, etc.). This is useful for EDAC drivers that want to take the address of an error reported in a machine check bank and let the user know which DIMM may need to be replaced. Specification for this interface is available at: https://cdrdv2.intel.com/v1/dl/getContent/603354 [ Based on earlier code by Qiuxu Zhuo <qiuxu.zhuo@intel.com>. ] [ bp: Make the first pr_info() in adxl_init() pr_debug() so that it doesn't pollute every dmesg. ] Signed-off-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com> CC: Len Brown <lenb@kernel.org> CC: linux-acpi@vger.kernel.org CC: linux-edac@vger.kernel.org Link: http://lkml.kernel.org/r/20181015202620.23610-1-tony.luck@intel.com
2018-10-12ACPI: remove redundant 'default n' from KconfigBartlomiej Zolnierkiewicz1-6/+0
'default n' is the default value for any bool or tristate Kconfig setting so there is no need to write it explicitly. Also since commit f467c5640c29 ("kconfig: only write '# CONFIG_FOO is not set' for visible symbols") the Kconfig behavior is the same regardless of 'default n' being present or not: ... One side effect of (and the main motivation for) this change is making the following two definitions behave exactly the same: config FOO bool config FOO bool default n With this change, neither of these will generate a '# CONFIG_FOO is not set' line (assuming FOO isn't selected/implied). That might make it clearer to people that a bare 'default n' is redundant. ... Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-08-23ACPI: fix menuconfig presentation of ACPI submenuArnd Bergmann1-3/+3
My fix for a recursive Kconfig dependency caused another issue where the ACPI specific options end up in the top-level menu in 'menuconfig'. This was an unintended side-effect of having a silent option between 'menuconfig ACPI' and 'if ACPI'. Moving the ARCH_SUPPORTS_ACPI symbol ahead of the ACPI menu solves that problem and restores the previous presentation. Reported-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Fixes: 2c870e61132c (arm64: fix ACPI dependencies) Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-07-24arm64: fix ACPI dependenciesArnd Bergmann1-3/+5
Kconfig reports a warning on x86 builds after the ARM64 dependency was added. drivers/acpi/Kconfig:6:error: recursive dependency detected! drivers/acpi/Kconfig:6: symbol ACPI depends on EFI This rephrases the dependency to keep the ARM64 details out of the shared Kconfig file, so Kconfig no longer gets confused by it. For consistency, all three architectures that support ACPI now select ARCH_SUPPORTS_ACPI in exactly the configuration in which they allow it. We still need the 'default x86', as each one wants a different default: default-y on x86, default-n on arm64, and always-y on ia64. Fixes: 5bcd44083a08 ("drivers: acpi: add dependency of EFI for arm64") Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Will Deacon <will.deacon@arm.com>
2018-07-23drivers: acpi: add dependency of EFI for arm64AKASHI Takahiro1-1/+1
As Ard suggested, CONFIG_ACPI && !CONFIG_EFI doesn't make sense on arm64, while CONFIG_ACPI and CONFIG_CPU_BIG_ENDIAN doesn't make sense either. As CONFIG_EFI already has a dependency of !CONFIG_CPU_BIG_ENDIAN, it is good enough to add a dependency of CONFIG_EFI to avoid any useless combination of configuration. This bug, reported by Will, will be revealed when my patch series, "arm64: kexec,kdump: fix boot failures on acpi-only system," is applied and the kernel is built under allmodconfig. Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Suggested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
2018-05-17ACPI: Enable PPTT support on ARM64Jeremy Linton1-0/+3
Now that we have a PPTT parser, in preparation for its use on arm64, lets build it. Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Tested-by: Vijaya Kumar K <vkilari@codeaurora.org> Tested-by: Xiongfeng Wang <wangxiongfeng2@huawei.com> Tested-by: Tomasz Nowicki <Tomasz.Nowicki@cavium.com> Reviewed-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Jeremy Linton <jeremy.linton@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2018-04-02Merge branches 'acpi-osi', 'acpi-scan', 'acpi-tad', 'acpi-video' and 'acpi-misc'Rafael J. Wysocki1-4/+17
* acpi-osi: ACPI / OSI: Add OEM _OSI strings to disable NVidia RTD3 * acpi-scan: ACPI / scan: Send change uevent with offine environmental data * acpi-tad: ACPI: Add Time and Alarm Device (TAD) driver * acpi-video: ACPI / video: Add quirk to force acpi-video backlight on Samsung 670Z5E * acpi-misc: ACPI / Kconfig: Update ACPI_PROCFS_POWER help text
2018-03-20ACPI: Add Time and Alarm Device (TAD) driverRafael J. Wysocki1-0/+13
Introduce a driver for the ACPI Time and Alarm Device (TAD) based on Section 9.18 of ACPI 6.2. This driver only supports the system wakeup capabilities of the TAD which are mandatory. Support for the RTC capabilities of the TAD will be added to it in the future. This driver is entirely sysfs-based. It provides attributes (under the TAD platform device) to allow user space to manage the AC and DC wakeup timers of the TAD: set and read their values, set and check their expire timer wake policies, check and clear their status and check the capabilities of the TAD reported by AML. The DC timer attributes are only present if the TAD supports a separate DC alarm timer. The wakeup events handling and power management of the TAD is expected to be taken care of by the ACPI PM domain attached to its platform device. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2018-03-18ACPI / Kconfig: Update ACPI_PROCFS_POWER help textRandy Dunlap1-4/+4
Fix grammar and punctuation (end sentences with a period) in the Kconfig help text for ACPI_PROCFS_POWER. I was looking at this since it appears to be going away (again, some day) and I have a working script that uses this info to tell me battery usage. I can update the script to use /sys/class/power_supply (in theory) but the contents (with units) should be documented in Documentation/ABI/ before /proc/acpi/battery/ is removed (IMO). Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-02-09Merge tag 'acpi-part2-4.16-rc1' of ↵Linus Torvalds1-1/+6
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull more ACPI updates from Rafael Wysocki: "These are mostly fixes and cleanups, a few new quirks, a couple of updates related to the handling of ACPI tables and ACPICA copyrights refreshment. Specifics: - Update the ACPICA kernel code to upstream revision 20180105 including: * Assorted fixes (Jung-uk Kim) * Support for X32 ABI compilation (Anuj Mittal) * Update of ACPICA copyrights to 2018 (Bob Moore) - Prepare for future modifications to avoid executing the _STA control method too early (Hans de Goede) - Make the processor performance control library code ignore _PPC notifications if they cannot be handled and fix up the C1 idle state definition when it is used as a fallback state (Chen Yu, Yazen Ghannam) - Make it possible to use the SPCR table on x86 and to replace the original IORT table with a new one from initrd (Prarit Bhargava, Shunyong Yang) - Add battery-related quirks for Asus UX360UA and UX410UAK and add quirks for table parsing on Dell XPS 9570 and Precision M5530 (Kai Heng Feng) - Address static checker warnings in the CPPC code (Gustavo Silva) - Avoid printing a raw pointer to the kernel log in the smart battery driver (Greg Kroah-Hartman)" * tag 'acpi-part2-4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: sbshc: remove raw pointer from printk() message ACPI: SPCR: Make SPCR available to x86 ACPI / CPPC: Use 64-bit arithmetic instead of 32-bit ACPI / tables: Add IORT to injectable table list ACPI / bus: Parse tables as term_list for Dell XPS 9570 and Precision M5530 ACPICA: Update version to 20180105 ACPICA: All acpica: Update copyrights to 2018 ACPI / processor: Set default C1 idle state description ACPI / battery: Add quirk for Asus UX360UA and UX410UAK ACPI: processor_perflib: Do not send _PPC change notification if not ready ACPI / scan: Use acpi_bus_get_status() to initialize ACPI_TYPE_DEVICE devs ACPI / bus: Do not call _STA on battery devices with unmet dependencies PCI: acpiphp_ibm: prepare for acpi_get_object_info() no longer returning status ACPI: export acpi_bus_get_status_handle() ACPICA: Add a missing pair of parentheses ACPICA: Prefer ACPI_TO_POINTER() over ACPI_ADD_PTR() ACPICA: Avoid NULL pointer arithmetic ACPICA: Linux: add support for X32 ABI compilation ACPI / video: Use true for boolean value
2018-02-07ACPI: SPCR: Make SPCR available to x86Prarit Bhargava1-1/+6
SPCR is currently only enabled or ARM64 and x86 can use SPCR to setup an early console. General fixes include updating Documentation & Kconfig (for x86), updating comments, and changing parse_spcr() to acpi_parse_spcr(), and earlycon_init_is_deferred to earlycon_acpi_spcr_enable to be more descriptive. On x86, many systems have a valid SPCR table but the table version is not 2 so the table version check must be a warning. On ARM64 when the kernel parameter earlycon is used both the early console and console are enabled. On x86, only the earlycon should be enabled by by default. Modify acpi_parse_spcr() to allow options for initializing the early console and console separately. Signed-off-by: Prarit Bhargava <prarit@redhat.com> Acked-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Mark Salter <msalter@redhat.com> Tested-by: Mark Salter <msalter@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-01-14x86/jailhouse: Enable PMTIMERJan Kiszka1-16/+16
Jailhouse exposes the PMTIMER as only reference clock to all cells. Pick up its address from the setup data. Allow to enable the Linux support of it by relaxing its strict dependency on ACPI. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Cc: jailhouse-dev@googlegroups.com Link: https://lkml.kernel.org/r/6d5c3fadd801eb3fba9510e2d3db14a9c404a1a0.1511770314.git.jan.kiszka@siemens.com
2017-11-16Merge tag 'mfd-next-4.15' of ↵Linus Torvalds1-0/+6
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "New drivers: - Add support for Cherry Trail Dollar Cove TI PMIC - Add support for Add Spreadtrum SC27xx series PMICs New device support: - Add support Regulator to axp20x New functionality: - Add DT support; aspeed-scu sc27xx-pmic - Add power saving support; rts5249 Fix-ups: - DT clean-up/rework; tps65217, max77693, iproc-cdru, iproc-mhb, tps65218 - Staticise/constify; stw481x - Use new succinct IRQ API; fsl-imx25-tsadc - Kconfig fix-ups; MFD_TPS65218 - Identify SPI method; lpc_ich - Use managed resources (devm_*) calls; ssbi - Remove unused/obsolete code/documentation; mc13xxx Bug fixes: - Fix typo in MAINTAINERS - Fix error handling; mxs-lradc - Clean-up IRQs on .remove; fsl-imx25-tsadc" * tag 'mfd-next-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (21 commits) dt-bindings: mfd: mc13xxx: Remove obsolete property mfd: axp20x: Add axp20x-regulator cell for AXP813 mfd: Add Spreadtrum SC27xx series PMICs driver dt-bindings: mfd: Add Spreadtrum SC27xx PMIC documentation mfd: ssbi: Use devm_of_platform_populate() mfd: fsl-imx25: Clean up irq settings during removal mfd: mxs-lradc: Fix error handling in mxs_lradc_probe() mfd: lpc_ich: Avoton/Rangeley uses SPI_BYT method mfd: tps65218: Introduce dependency on CONFIG_OF mfd: tps65218: Correct the config description MAINTAINERS: Fix Dialog search term for watchdog binding file mfd: fsl-imx25: Set irq handler and data in one go mfd: rts5249: Add support for RTS5250S power saving ACPI / PMIC: Add opregion driver for Intel Dollar Cove TI PMIC mfd: Add support for Cherry Trail Dollar Cove TI PMIC syscon: dt-bindings: Add binding document for iProc MHB block syscon: dt-bindings: Add binding doc for Broadcom iProc CDRU mfd: max77693: Add muic of_compatible in mfd_cell mfd: stw481x: Make three arrays static const, reduces object code size mfd: tps65217: Introduce dependency on CONFIG_OF ...
2017-11-13Merge tag 'acpi-4.15-rc1' of ↵Linus Torvalds1-0/+16
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI updates from Rafael Wysocki: "These update ACPICA to upstream revision 20170831, fix APEI to use the fixmap instead of ioremap_page_range(), add an operation region driver for TI PMIC TPS68470, add support for PCC subspace IDs to the ACPI CPPC driver, fix a few assorted issues and clean up some code. Specifics: - Update the ACPICA code to upstream revision 20170831 including * PDTT table header support (Bob Moore). * Cleanup and extension of internal string-to-integer conversion functions (Bob Moore). * Support for 64-bit hardware accesses (Lv Zheng). * ACPI PM Timer code adjustment to deal with 64-bit return values of acpi_hw_read() (Bob Moore). * Support for deferred table verification in acpiexec (Lv Zheng). - Fix APEI to use the fixmap instead of ioremap_page_range() which cannot work correctly the way the code in there attempted to use it and drop some code that's not necessary any more after that change (James Morse). - Clean up the APEI support code and make it use 64-bit timestamps (Arnd Bergmann, Dongjiu Geng, Jan Beulich). - Add operation region driver for TI PMIC TPS68470 (Rajmohan Mani). - Add support for PCC subspace IDs to the ACPI CPPC driver (George Cherian). - Fix an ACPI EC driver regression related to the handling of EC events during the "noirq" phases of system suspend/resume (Lv Zheng). - Delay the initialization of the lid state in the ACPI button driver to fix issues appearing on some systems (Hans de Goede). - Extend the KIOX000A "device always present" quirk to cover all affected BIOS versions (Hans de Goede). - Clean up some code in the ACPI core and drivers (Colin Ian King, Gustavo Silva)" * tag 'acpi-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (24 commits) ACPI: Mark expected switch fall-throughs ACPI / LPSS: Remove redundant initialization of clk ACPI / CPPC: Make CPPC ACPI driver aware of PCC subspace IDs mailbox: PCC: Move the MAX_PCC_SUBSPACES definition to header file ACPI / sysfs: Make function param_set_trace_method_name() static ACPI / button: Delay acpi_lid_initialize_state() until first user space open ACPI / EC: Fix regression related to triggering source of EC event handling APEI / ERST: use 64-bit timestamps ACPI / APEI: Remove arch_apei_flush_tlb_one() arm64: mm: Remove arch_apei_flush_tlb_one() ACPI / APEI: Remove ghes_ioremap_area ACPI / APEI: Replace ioremap_page_range() with fixmap ACPI / APEI: remove the unused dead-code for SEA/NMI notification type ACPI / x86: Extend KIOX000A quirk to cover all affected BIOS versions ACPI / APEI: adjust a local variable type in ghes_ioremap_pfn_irq() ACPICA: Update version to 20170831 ACPICA: Update acpi_get_timer for 64-bit interface to acpi_hw_read ACPICA: String conversions: Update to add new behaviors ACPICA: String conversions: Cleanup/format comments. No functional changes ACPICA: Restructure/cleanup all string-to-integer conversion functions ...
2017-11-13Merge branch 'acpi-pm'Rafael J. Wysocki1-0/+5
* acpi-pm: ACPI / PM: Fix acpi_pm_notifier_lock vs flush_workqueue() deadlock ACPI / LPSS: Consolidate runtime PM and system sleep handling ACPI / PM: Combine device suspend routines ACPI / LPIT: Add Low Power Idle Table (LPIT) support ACPI / PM: Split code validating need for runtime resume in ->prepare() ACPI / PM: Restore acpi_subsys_complete() ACPI / PM: Combine two identical device resume routines ACPI / PM: Remove stale function header
2017-11-13Merge branches 'acpi-pmic', 'acpi-apei' and 'acpi-x86'Rafael J. Wysocki1-0/+16
* acpi-pmic: ACPI / PMIC: Add TI PMIC TPS68470 operation region driver * acpi-apei: APEI / ERST: use 64-bit timestamps ACPI / APEI: Remove arch_apei_flush_tlb_one() arm64: mm: Remove arch_apei_flush_tlb_one() ACPI / APEI: Remove ghes_ioremap_area ACPI / APEI: Replace ioremap_page_range() with fixmap ACPI / APEI: remove the unused dead-code for SEA/NMI notification type ACPI / APEI: adjust a local variable type in ghes_ioremap_pfn_irq() * acpi-x86: ACPI / x86: Extend KIOX000A quirk to cover all affected BIOS versions
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman1-0/+1
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-13ACPI / PMIC: Add opregion driver for Intel Dollar Cove TI PMICTakashi Iwai1-0/+6
This patch adds the opregion driver for Dollar Cove TI PMIC on Intel Cherry Trail devices. The patch is based on the original work by Intel, found at: https://github.com/01org/ProductionKernelQuilts with many cleanups and rewrites. The driver is currently provided only as built-in to follow other PMIC opregion drivers convention. The re-enumeration of devices at probe is required for fixing the issues on HP x2 210 G2. See bug#195689. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=193891 Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=195689 Signed-off-by: Takashi Iwai <tiwai@suse.de> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-10-11ACPI / LPIT: Add Low Power Idle Table (LPIT) supportSrinivas Pandruvada1-0/+5
Add functionality to read LPIT table, which provides: - Sysfs interface to read residency counters via /sys/devices/system/cpu/cpuidle/low_power_idle_cpu_residency_us /sys/devices/system/cpu/cpuidle/low_power_idle_system_residency_us Here the count "low_power_idle_cpu_residency_us" shows the time spent by CPU package in low power state. This is read via MSR interface, which points to MSR for PKG C10. Here the count "low_power_idle_system_residency_us" show the count the system was in low power state. This is read via MMIO interface. This is mapped to SLP_S0 residency on modern Intel systems. This residency is achieved only when CPU is in PKG C10 and all functional blocks are in low power state. It is possible that none of the above counters present or anyone of the counter present or all counters present. For example: On my Kabylake system both of the above counters present. After suspend to idle these counts updated and prints: 6916179 6998564 This counter can be read by tools like turbostat to display. Or it can be used to debug, if modern systems are reaching desired low power state. - Provides an interface to read residency counter memory address This address can be used to get the base address of PMC memory mapped IO. This is utilized by intel_pmc_core driver to print more debug information. In addition, to avoid code duplication to read iomem, removed the read of iomem from acpi_os_read_memory() in osl.c and made a common function acpi_os_read_iomem(). This new function is used for reading iomem in in both osl.c and acpi_lpit.c. Link: http://www.uefi.org/sites/default/files/resources/Intel_ACPI_Low_Power_S0_Idle.pdf Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-10-03ACPI / PMIC: Add TI PMIC TPS68470 operation region driverRajmohan Mani1-0/+16
The Kabylake platform coreboot (Chrome OS equivalent of BIOS) has defined 4 operation regions for the TI TPS68470 PMIC. These operation regions are to enable/disable voltage regulators, configure voltage regulators, enable/disable clocks and to configure clocks. This config adds ACPI operation region support for TI TPS68470 PMIC. TPS68470 device is an advanced power management unit that powers a Compact Camera Module (CCM), generates clocks for image sensors, drives a dual LED for flash and incorporates two LED drivers for general purpose indicators. This driver enables ACPI operation region support to control voltage regulators and clocks for the TPS68470 PMIC. Signed-off-by: Rajmohan Mani <rajmohan.mani@intel.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-05-03Merge tag 'mfd-next-4.12' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "New Drivers: - Freescale MXS Low Resolution ADC - Freescale i.MX23/i.MX28 LRADC touchscreen - Motorola CPCAP Power Button - TI LMU (Lighting Management Unit) - Atmel SMC (Static Memory Controller) New Device Support: - Add support for X-Powers AXP803 to axp20x - Add support for Dialog Semi DA9061 to da9062-core - Add support for Intel Cougar Mountain to lpc_ich - Add support for Intel Gemini Lake to lpc_ich New Functionality: - Add Device Tree support; wm831x-*, axp20x, ti-lmu, da9062, sun4i-gpadc - Add IRQ sense support; motorola-cpcap - Add ACPI support; cros_ec - Add Reset support; altera-a10sr - Add ADC support; axp20x - Add AC Power support; axp20x - Add Runtime PM support; atmel-ebi, exynos-lpass - Add Battery Power Supply support; axp20x - Add Clock support; exynos-lpass, hi655x-pmic Fix-ups: - Implicitly specify required headers; motorola-cpcap, intel_soc_pmic_bxtwc - Add .remove() method; stm32-timers, exynos-lpass - Remove unused code; intel_soc_pmic_core, intel-lpss-acpi, ipaq-micro, atmel-smc, menelaus - Rename variables for clarity; axp20x - Convert pr_warning() to pr_warn(); db8500-prcmu, sta2x11-mfd, twl4030-power - Improve formatting; arizona-core, axp20x - Use raw_spinlock_*() variants; asic3, t7l66xb, tc6393xb - Simplify/refactor code; arizona-core, atmel-ebi - Improve error checking; intel_soc_pmic_core Bug Fixes: - Ensure OMAP3630/3730 boards can successfully reboot; twl4030-power - Correct max-register value; stm32-timers - Extend timeout to account for clock stretching; cros_ec_spi - Use correct IRQ trigger type; motorola-cpcap - Fix bad use of IRQ sense register; motorola-cpcap - Logic error "||" should be "&&"; mxs-lradc-ts" * tag 'mfd-next-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (79 commits) input: touchscreen: mxs-lradc: || vs && typos dt-bindings: Add AXP803's regulator info mfd: axp20x: Support AXP803 variant dt-bindings: Add device tree binding for X-Powers AXP803 PMIC dt-bindings: Make AXP20X compatible strings one per line mfd: intel_soc_pmic_core: Fix unchecked return value mfd: menelaus: Remove obsolete local_irq_disable() and local_irq_enable() mfd: omap-usb-tll: Configure ULPIAUTOIDLE mfd: omap-usb-tll: Fix inverted bit use for USB TLL mode mfd: palmas: Fixed spelling mistake in error message mfd: lpc_ich: Add support for Intel Gemini Lake SoC mfd: hi655x: Add the clock cell to provide WiFi and Bluetooth mfd: intel_soc_pmic: Fix a mess with compilation units mfd: exynos-lpass: Add runtime PM support mfd: exynos-lpass: Add missing remove() function mfd: exynos-lpass: Add support for clocks mfd: exynos-lpass: Remove pad retention control iio: adc: add support for X-Powers AXP20X and AXP22X PMICs ADCs mfd: cpcap: Fix bad use of IRQ sense register mfd: cpcap: Use ack_invert interrupts ...
2017-05-01Merge branch 'efi-core-for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull EFI updates from Ingo Molnar: "The main changes in this cycle were: - move BGRT handling to drivers/acpi so it can be shared between x86 and ARM - bring the EFI stub's initrd and FDT allocation logic in line with the latest changes to the arm64 boot protocol - improvements and fixes to the EFI stub's command line parsing routines - randomize the virtual mapping of the UEFI runtime services on ARM/arm64 - ... and other misc enhancements, cleanups and fixes" * 'efi-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: efi/libstub/arm: Don't use TASK_SIZE when randomizing the RT space ef/libstub/arm/arm64: Randomize the base of the UEFI rt services region efi/libstub/arm/arm64: Disable debug prints on 'quiet' cmdline arg efi/libstub: Unify command line param parsing efi/libstub: Fix harmless command line parsing bug efi/arm32-stub: Allow boot-time allocations in the vmlinux region x86/efi: Clean up a minor mistake in comment efi/pstore: Return error code (if any) from efi_pstore_write() efi/bgrt: Enable ACPI BGRT handling on arm64 x86/efi/bgrt: Move efi-bgrt handling out of arch/x86 efi/arm-stub: Round up FDT allocation to mapping size efi/arm-stub: Correct FDT and initrd allocation rules for arm64
2017-05-01Merge tag 'acpi-4.12-rc1' of ↵Linus Torvalds1-1/+7
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI updates from Rafael Wysocki: "These are some device enumeration code changes, updates of the AC and battery drivers to help them avoid attaching to devices that cannot be handled by them, new operation region driver for the Intel CHT Whiskey Cove PMIC, new sysfs entries for CPPC performance capabilities, a new _REV quirk blacklist entry and a couple of assorted minor fixes and cleanups. Specifics: - Update the core device enumeration code to make it more internally consistent and robust and drop the force_remove sysfs attribute that could be used to tell it to ignore errors on device hot-removal which was dangerous in general and no real and still relevant use cases for it could be found (Rafael Wysocki, Michal Hocko). - Make the core device enumeration code use _PXM to associate platform devices created by it with specific NUMA nodes (Shanker Donthineni). - Extend the CPPC library by adding more sysfs entries for performance capabilities to it and making it use the lowest nonlinear performance parameter (Prashanth Prakash). - Make the CPU online more consistent with CPU initialization in the ACPI processor driver (Prashanth Prakash). - Update the AC and battery drivers to help them avoid attaching to devices that cannot be handled by them and update the axp288_charger power supply driver to work correctly on ACPI systems without the INT3496 device (Hans de Goede). - Add an ACPI operation region driver for the Intel CHT Whiskey Cove PMIC and update the xpower operation region driver to work without IIO which isn't really necessary for it to work (Hans de Goede). - Add a new entry for Dell Inspiron 7537 to the _REV quirk blacklist (Kai Heng Feng). - Make the code in the ACPI video driver easier to follow by adding symbols and comments to it (Dmitry Frank). - Update ACPI documentation and drop a function that has no users from the tables-handling code (Cao jin, Baoquan He)" * tag 'acpi-4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI / PMIC: Stop xpower OPRegion handler relying on IIO ACPI / PMIC: Add opregion driver for Intel CHT Whiskey Cove PMIC ACPI / scan: Avoid enumerating devices more than once ACPI / scan: Apply default enumeration to devices with ACPI drivers power: supply: axp288_charger: Only wait for INT3496 device if present ACPI / AC: Add a blacklist with PMIC ACPI HIDs with a native charger driver ACPI / battery: Add a blacklist with PMIC ACPI HIDs with a native battery driver ACPI / battery: Fix acpi_battery_exit on acpi_battery_init_async errors ACPI / utils: Add new acpi_dev_present helper ACPI / video: add comments about subtle cases ACPI / video: get rid of magic numbers and use enum instead ACPI / doc: linuxized-acpica.txt: fix typos ACPI / blacklist: add _REV quirk for Dell Inspiron 7537 ACPI / tables: Drop acpi_parse_entries() which is not used ACPI / CPPC: add sysfs entries for CPPC perf capabilities ACPI / CPPC: Read lowest nonlinear perf in cppc_get_perf_caps() ACPI / platform: Update platform device NUMA node based on _PXM method ACPI / Processor: Drop setup_max_cpus check from acpi_processor_add() ACPI / scan: Drop support for force_remove
2017-05-01Merge tag 'for-linux-4.12' of git://github.com/cminyard/linux-ipmiLinus Torvalds1-1/+1
Pull IPMI updates from Corey Minyard: "A few fixes of things in the IPMI area, the watchdog would have issues at panic time cause by a recently introduced change, a problem with device numbering, one possible panic in the I2C driver (destined for stable). Nothing earth-shattering, but some things that need to go in" * tag 'for-linux-4.12' of git://github.com/cminyard/linux-ipmi: ipmi/watchdog: fix wdog hang on panic waiting for ipmi response ipmi_si: use smi_num for init_name ipmi: bt-bmc: Add ast2500 compatible string ACPI / IPMI: change warning to debug on timeout ACPI / IPMI: allow ACPI_IPMI with IPMI_SSIF ipmi_ssif: use setup_timer ipmi: Fix kernel panic at ipmi_ssif_thread()
2017-04-27mfd: intel_soc_pmic: Fix a mess with compilation unitsAndy Shevchenko1-1/+1
Crystal Cove and Whiskey Cove are two different PMICs which are installed on Intel Atom SoC based platforms. Moreover there are two independent drivers that by some reason were supposed (*) to get into one kernel module. Fix the mess by clarifying Kconfig option for Crystal Cove and split Whiskey Cove out of it. (*) It looks like the configuration was never tested with INTEL_SOC_PMIC=n. The line in Makefile is actually wrong. Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> (supporter:ACPI) Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-04-20ACPI / PMIC: Stop xpower OPRegion handler relying on IIOHans de Goede1-1/+1
The intel_pmic_xpower code provides an OPRegion handler, which must be available before other drivers using it are loaded, which can only be ensured if both the mfd and opregion drivers are built in, which is why the Kconfig option for intel_pmic_xpower is a bool. The use of IIO is causing trouble for generic distro configs here as distros will typically want to build IIO drivers as modules and there really is no reason to use IIO here. The reading of the ADC value is a single regmap_bulk_read, which is already protected against races by the regmap-lock. This commit removes the use of IIO, allowing distros to enable the driver without needing to built IIO in and also actually simplifies the code. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-04-20ACPI / PMIC: Add opregion driver for Intel CHT Whiskey Cove PMICHans de Goede1-0/+6
Add opregion driver for Intel CHT Whiskey Cove PMIC, based on various non upstreamed CHT Whiskey Cove PMIC patches. This does not include support for the Thermal opregion (DPTF) due to lacking documentation. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-04-10EDAC: Remove EDAC_MM_EDACBorislav Petkov1-1/+0
Move all the EDAC core functionality behind CONFIG_EDAC and get rid of that indirection. Update defconfigs which had it. While at it, fix dependencies such that EDAC depends on RAS for the tracepoints. Signed-off-by: Borislav Petkov <bp@suse.de> Cc: linux-arm-kernel@lists.infradead.org Cc: linuxppc-dev@lists.ozlabs.org Cc: Chris Metcalf <cmetcalf@mellanox.com> Cc: linux-edac@vger.kernel.org
2017-04-10ACPI/extlog: Add EDAC dependencyBorislav Petkov1-1/+1
We are calling EDAC functions - make the proper dependencies explicit. Signed-off-by: Borislav Petkov <bp@suse.de> Cc: linux-acpi@vger.kernel.org
2017-04-07ACPI / IPMI: allow ACPI_IPMI with IPMI_SSIFSinan Kaya1-1/+1
ACPI_IPMI driver currently depends on IPMI System Interface (IPMI_SI) driver to be enabled. IPMI_SI driver only handles KCS, SMIC and BT BMC interfaces. IPMI_SSIF is an alternative BMC communication method. It allows BMC to be accessed over an I2C bus instead of a standard interface. Change the dependency to IPMI_HANDLER so that ACPI_IPMI works with all IPMI providers. Signed-off-by: Sinan Kaya <okaya@codeaurora.org> Signed-off-by: Corey Minyard <cminyard@mvista.com> Acked-by: Rafael J. Wysocki <rjw@rjwysocki.net>
2017-04-05efi/bgrt: Enable ACPI BGRT handling on arm64Bhupesh Sharma1-1/+1
Now that the ACPI BGRT handling code has been made generic, we can enable it for arm64. Signed-off-by: Bhupesh Sharma <bhsharma@redhat.com> [ Updated commit log to reflect that BGRT is only enabled for arm64, and added missing 'return' statement to the dummy acpi_parse_bgrt() function. ] Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matt Fleming <matt@codeblueprint.co.uk> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-efi@vger.kernel.org Link: http://lkml.kernel.org/r/20170404160245.27812-8-ard.biesheuvel@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-12-14Merge branch 'for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial updates from Jiri Kosina. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: NTB: correct ntb_spad_count comment typo misc: ibmasm: fix typo in error message Remove references to dead make variable LINUX_INCLUDE Remove last traces of ikconfig.h treewide: Fix printk() message errors Documentation/device-mapper: s/getsize/getsz/
2016-12-14treewide: Fix printk() message errorsMasanari Iida1-1/+1
This patch fix spelling typos in printk and kconfig. Signed-off-by: Masanari Iida <standby24x7@gmail.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-10-24docs: fix locations of several documents that got movedMauro Carvalho Chehab1-1/+1
The previous patch renamed several files that are cross-referenced along the Kernel documentation. Adjust the links to point to the right places. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-10-03Merge tag 'tty-4.9-rc1' of ↵Linus Torvalds1-0/+3
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty and serial updates from Greg KH: "Here is the big tty and serial patch set for 4.9-rc1. It also includes some drivers/dma/ changes, as those were needed by some serial drivers, and they were all acked by the DMA maintainer. Also in here is the long-suffering ACPI SPCR patchset, which was passed around from maintainer to maintainer like a hot-potato. Seems I was the sucker^Wlucky one. All of those patches have been acked by the various subsystem maintainers as well. All of this has been in linux-next with no reported issues" * tag 'tty-4.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (111 commits) Revert "serial: pl011: add console matching function" MAINTAINERS: update entry for atmel_serial driver serial: pl011: add console matching function ARM64: ACPI: enable ACPI_SPCR_TABLE ACPI: parse SPCR and enable matching console of/serial: move earlycon early_param handling to serial Revert "drivers/tty: Explicitly pass current to show_stack" tty: amba-pl011: Don't complain on -EPROBE_DEFER when no irq nios2: dts: 10m50: Add tx-threshold parameter serial: 8250: Set Altera 16550 TX FIFO Threshold serial: 8250: of: Load TX FIFO Threshold from DT Documentation: dt: serial: Add TX FIFO threshold parameter drivers/tty: Explicitly pass current to show_stack serial: imx: Fix DCD reading serial: stm32: mark symbols static where possible serial: xuartps: Add some register initialisation to cdns_early_console_setup() serial: xuartps: Removed unwanted checks while reading the error conditions serial: xuartps: Rewrite the interrupt handling logic serial: stm32: use mapbase instead of membase for DMA tty/serial: atmel: fix fractional baud rate computation ...