summaryrefslogtreecommitdiff
path: root/arch/mips
AgeCommit message (Collapse)AuthorFilesLines
2015-08-26MIPS: netlogic: Prepare ipi handlers for irq argument removalThomas Gleixner1-2/+4
The irq argument of most interrupt flow handlers is unused or merily used instead of a local variable. The handlers which need the irq argument can retrieve the irq number from the irq descriptor. Search and update was done with coccinelle and the invaluable help of Julia Lawall. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: linux-mips@linux-mips.org Cc: LKML <linux-kernel@vger.kernel.org> Patchwork: https://patchwork.linux-mips.org/patch/10705/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-08-26MIPS: octeon: Replace the homebrewn flow handlerThomas Gleixner1-11/+11
The gpio interrupt handling of octeon contains a homebrewn flow handler which calls either handle_level_irq or handle_edge_irq depending on the trigger type. Thats an extra conditional and call in the interrupt handling path. The proper way to handle different types and therefor different flows is to update the handler in the irq_set_type() callback. Remove the extra indirection and add the handler update to octeon_irq_ciu_gpio_set_type(). At mapping time it defaults to handle_level_irq which gets updated if the device tree contains a different trigger type. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: David Daney <david.daney@cavium.com> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: linux-mips@linux-mips.org Cc: LKML <linux-kernel@vger.kernel.org> Patchwork: https://patchwork.linux-mips.org/patch/10704/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-08-26MIPS: ath91: Remove pointless irqdisable/enableThomas Gleixner1-16/+2
The various interrupt flow handlers in ath79 are cascading interrupt handlers. They all have a disable_irq_nosync()/enable_irq() pair around the generic_handle_irq() call. The value of this disable/enable is zero because its a complete noop: disable_irq_nosync() merily increments the disable count without actually masking the interrupt. enable_irq() soleley decrements the disable count without touching the interrupt chip. The interrupt cannot arrive again because the complete call chain runs with interrupts disabled. Remove it. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mips@linux-mips.org Cc: LKML <linux-kernel@vger.kernel.org> Cc: Jiang Liu <jiang.liu@linux.intel.com> Patchwork: https://patchwork.linux-mips.org/patch/10703/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-08-26MIPS: alchemy: Remove pointless irqdisable/enableThomas Gleixner1-2/+4
bcsr_csc_handler() is a cascading interrupt handler. It has a disable_irq_nosync()/enable_irq() pair around the generic_handle_irq() call. The value of this disable/enable is zero because its a complete noop: disable_irq_nosync() merily increments the disable count without actually masking the interrupt. enable_irq() soleley decrements the disable count without touching the interrupt chip. The interrupt cannot arrive again because the complete call chain runs with interrupts disabled. Remove it. [ralf@linux-mips.org: Fold in followup fix from Thomas Gleixner.] Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mips@linux-mips.org Cc: LKML <linux-kernel@vger.kernel.org> Cc: Jiang Liu <jiang.liu@linux.intel.com> Patchwork: https://patchwork.linux-mips.org/patch/10702/ Patchwork: https://patchwork.linux-mips.org/patch/10708/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-08-26MIPS: bcm63xx: Use irq_set_handler_locked()Thomas Gleixner1-2/+2
Use irq_set_handler_locked() as it avoids a redundant lookup of the irq descriptor. Search and replacement was done with coccinelle. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Julia Lawall <julia.lawall@lip6.fr> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: LKML <linux-kernel@vger.kernel.org> Patchwork: https://patchwork.linux-mips.org/patch/10701/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-08-26MIPS: alchemy: Use irq_set_chip_handler_name_locked()Thomas Gleixner1-2/+2
Hand in irq_data and avoid the redundant lookup of irq_desc. Originally-from: Jiang Liu <jiang.liu@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: LKML <linux-kernel@vger.kernel.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/10700/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-08-26MIPS: irq: Use access helper irq_data_get_affinity_mask()Jiang Liu3-8/+11
This is a preparatory patch for moving irq_data struct members. Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mips@linux-mips.org Cc: LKML <linux-kernel@vger.kernel.org> Patchwork: https://patchwork.linux-mips.org/patch/10699/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-08-26MIPS: pci-rt3883: Consolidate chained IRQ handler install/removeThomas Gleixner1-2/+1
Chained irq handlers usually set up handler data as well. We now have a function to set both under irq_desc->lock. Replace the two calls with one. Search and conversion was done with coccinelle. Reported-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: LKML <linux-kernel@vger.kernel.org> Cc: Jiang Liu <jiang.liu@linux.intel.com> Patchwork: https://patchwork.linux-mips.org/patch/10698/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-08-26MIPS: pci-ar724x: Consolidate chained IRQ handler install/removeThomas Gleixner1-2/+2
Chained irq handlers usually set up handler data as well. We now have a function to set both under irq_desc->lock. Replace the two calls with one. Search and conversion was done with coccinelle. Reported-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Cc: linux-mips@linux-mips.org Cc: LKML <linux-kernel@vger.kernel.org> Cc: Jiang Liu <jiang.liu@linux.intel.com> Patchwork: https://patchwork.linux-mips.org/patch/10697/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-08-26MIPS: pci-ar71xx: Consolidate chained IRQ handler install/removeThomas Gleixner1-2/+2
Chained irq handlers usually set up handler data as well. We now have a function to set both under irq_desc->lock. Replace the two calls with one. Search and conversion was done with coccinelle. Reported-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Cc: linux-mips@linux-mips.org Cc: LKML <linux-kernel@vger.kernel.org> Cc: Jiang Liu <jiang.liu@linux.intel.com> Patchwork: https://patchwork.linux-mips.org/patch/10696/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-08-26MIPS: jz4740: Consolidate chained IRQ handler install/removeThomas Gleixner1-2/+2
Chained irq handlers usually set up handler data as well. We now have a function to set both under irq_desc->lock. Replace the two calls with one. Search and conversion was done with coccinelle. Reported-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Cc: linux-mips@linux-mips.org Cc: LKML <linux-kernel@vger.kernel.org> Cc: Jiang Liu <jiang.liu@linux.intel.com> Patchwork: https://patchwork.linux-mips.org/patch/10695/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-08-26MIPS: Set up FTLB probability for I6400Markos Chandras2-5/+15
Set up the I6400 FTLB probability similar to P5600 and proAptiv. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/10652/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-08-26MIPS: cpu-probe: Fix VTLB/FTLB configuration for R6Markos Chandras1-1/+10
R6 has dropped the MMUExtDef field from the config4 register and it now returns 0. However, the return value means nothing in that case and the only supported configuration for R6 is the VTLB+FTLB (MMUextDef == 3). As a result, rework the code so that the correct value is set for R6 cores. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/10651/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-08-26MIPS: Add default case for the FTLB enable/disable codeMarkos Chandras1-3/+10
Add a default case for the FTLB enable/disable code. This will be used to detect that something went wrong in the set_ftlb_enable() function either because that function knows nothing about the running core, or simply because the core can't turn its FTLB on/off. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/10650/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-08-26MIPS: cpu-probe: Remove cp0 hazard barrier when enabling the FTLBMarkos Chandras1-1/+0
We are so early in the boot process where we really don't want to stall and wait for CP0 FTLB related changes become visible so just drop the cp0 hazard barrier. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/10649/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-08-26MIPS: CM: Add support for reporting CM cache errorsMarkos Chandras3-111/+254
The CM cache error reporting code is not Malta specific and as such it should live in the mips-cm.c file. Moreover, CM2 and CM3 differ in the way cache errors are being recorded to the registers so extend the previous code to add support for the CM3 as well. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/10646/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-08-26MIPS: CPC: Fix type for GCR CPC base reg for 64-bitMarkos Chandras1-1/+1
The GCR CPC base register is 64-bit on 64-bit processors so use the appropriate field. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/10645/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-08-26MIPS: CM: The CMGCRBase register is 64-bit on 64 bit kernels.Markos Chandras1-1/+1
The CMGCRBase register (CP0, 15, 3) register is 64-bit on MIPS64 so we change its type to unsigned long. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/10644/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-08-26MIPS: mips-cm: Extend CM accessors for 64-bit CPUsMarkos Chandras2-4/+48
Previously, the CM accessors were only accessing CM registers as u32 types instead of using the native CM register with. However, newer CMs may actually be 64-bit on MIPS64 cores. Fortunately, current 64-bit CMs (CM3) hold all the useful configuration bits in the lower half of the 64-bit registers (at least most of them) so they can still be accessed using the current 32-bit accessors. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Bresticker <abrestic@chromium.org> Cc: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/10707/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-08-26MIPS: Add platform callback before initializing the L2 cacheMarkos Chandras3-0/+24
Allow platforms to perform platform-specific steps before configuring the L2 cache. This is necessary for platforms with CM3 since the L2 parameters no longer live in the Config2 register. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/10642/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-08-26MIPS: CM3: Add support for CM3 L2 cache.Paul Burton1-0/+32
Detect the L2 cache configuration from GCR_L2_CONFIG when a CM3 is present in the system, rather than from Config2 which does not expose the L2 configuration on I6400. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/10641/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-08-26MIPS: CM: Add GCR_L2_CONFIG register accessorsPaul Burton1-0/+11
Provide accessor functions for the GCR_L2_CONFIG register introduced with CM3, and define the bits included in the register. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/10639/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-08-26MIPS: mips-cm: Implement mips_cm_revisionPaul Burton1-0/+21
Provide a function to trivially return the version of the CM present in the system, or 0 if no CM is present. The mips_cm_revision() will be used later on to determine the CM register width, so it must not use the regular CM accessors to read the revision register since that will lead to build failures due to recursive inlines. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/10655/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-08-26MIPS: Kconfig: Disable MIPS MT and SMP implementations for R6Markos Chandras1-3/+3
R6 does not support the MIPS MT ASE and the CMP/SMP options so restrict them in order to prevent users from selecting incompatible SMP configuration for R6 cores. We also disable the CPS/SMP option because its support hasn't been added to the CPS code yet. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/10637/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-08-26MIPS: Add MIPS I6400 probe supportMarkos Chandras1-0/+4
Add a case in cpu_probe_mips for the MIPS I6400 processor ID, which sets the CPU type to the new CPU_I6400. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/10636/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-08-26MIPS: Add cases for CPU_I6400Markos Chandras9-0/+21
Add a CPU_I6400 case to various switch statements, doing the same thing as for CPU_P5600. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/10635/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-08-26MIPS: Add MIPS I6400 PRid and cputype identifiersMarkos Chandras1-0/+2
Add a Processor ID and CPU type for the MIPS I6400 core. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/10634/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-08-26MIPS: ath79: irq: IRQCHIP_DECLARE moved to linux/irqchip.hAlban Bedel1-1/+0
Remove the ugly cross tree include now that IRQCHIP_DECLARE moved to linux/irqchip.h. Signed-off-by: Alban Bedel <albeu@free.fr> Cc: linux-mips@linux-mips.org Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Andrew Bresticker <abrestic@chromium.org> Cc: Qais Yousef <qais.yousef@imgtec.com> Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/10633/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-08-18MIPS: Fix LLVM build issue.Ralf Baechle1-1/+1
Matthew Fortune <Matthew.Fortune@imgtec.com> reports: The genex.S file appears to mix the case of a macro between its definition and use. A cut down example of this is below. The macro __build_clear_none has lower case 'build' but ends up being instantiated with upper case BUILD. Can this be fixed on master. It has been picked up by the LLVM integrated assembler which is currently case sensitive. We are likely to fix the assembler as well but the code is currently inconsistent in the kernel. .macro __build_clear_none .endm .macro __BUILD_HANDLER exception handler clear verbose ext .align 5 .globl handle_\exception; .align 2; .type handle_\exception, @function; .ent handle_\exception, 0; handle_\exception: .frame $29, 184, $29 .set noat .globl handle_\exception\ext; .type handle_\exception\ext, @function; handle_\exception\ext: __BUILD_clear_\clear .endm .macro BUILD_HANDLER exception handler clear verbose __BUILD_HANDLER \exception \handler \clear \verbose _int .endm BUILD_HANDLER ftlb ftlb none silent Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Reported-by: Matthew Fortune <Matthew.Fortune@imgtec.com>
2015-08-16MIPS: Fix seccomp syscall argument for MIPS64Markos Chandras2-2/+2
Commit 4c21b8fd8f14 ("MIPS: seccomp: Handle indirect system calls (o32)") fixed indirect system calls on O32 but it also introduced a bug for MIPS64 where it erroneously modified the v0 (syscall) register with the assumption that the sycall offset hasn't been taken into consideration. This breaks seccomp on MIPS64 n64 and n32 ABIs. We fix this by replacing the addition with a move instruction. Fixes: 4c21b8fd8f14 ("MIPS: seccomp: Handle indirect system calls (o32)") Cc: <stable@vger.kernel.org> # 3.15+ Reviewed-by: James Hogan <james.hogan@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/10951/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-08-09Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds29-60/+128
Pull MIPS fixes from Ralf Baechle: "Another round of MIPS fixes for 4.2. No area does particularly stand out but we have a two unpleasant ones: - Kernel ptes are marked with a global bit which allows the kernel to share kernel TLB entries between all processes. For this to work both entries of an adjacent even/odd pte pair need to have the global bit set. There has been a subtle race in setting the other entry's global bit since ~ 2000 but it take particularly pathological workloads that essentially do mostly vmalloc/vfree to trigger this. This pull request fixes the 64-bit case but leaves the case of 32 bit CPUs with 64 bit ptes unsolved for now. The unfixed cases affect hardware that is not available in the field yet. - Instruction emulation requires loading instructions from user space but the current fast but simplistic approach will fail on pages that are PROT_EXEC but !PROT_READ. For this reason we temporarily do not permit this permission and will map pages with PROT_EXEC | PROT_READ. The remainder of this pull request is more or less across the field and the short log explains them well" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: MIPS: Make set_pte() SMP safe. MIPS: Replace add and sub instructions in relocate_kernel.S with addiu MIPS: Flush RPS on kernel entry with EVA Revert "MIPS: BCM63xx: Provide a plat_post_dma_flush hook" MIPS: BMIPS: Delete unused Kconfig symbol MIPS: Export get_c0_perfcount_int() MIPS: show_stack: Fix stack trace with EVA MIPS: do_mcheck: Fix kernel code dump with EVA MIPS: SMP: Don't increment irq_count multiple times for call function IPIs MIPS: Partially disable RIXI support. MIPS: Handle page faults of executable but unreadable pages correctly. MIPS: Malta: Don't reinitialise RTC MIPS: unaligned: Fix build error on big endian R6 kernels MIPS: Fix sched_getaffinity with MT FPAFF enabled MIPS: Fix build with CONFIG_OF=y for non OF-enabled targets CPUFREQ: Loongson2: Fix broken build due to incorrect include.
2015-08-07signal: fix information leak in copy_siginfo_from_user32Amanieu d'Antras1-2/+0
This function can leak kernel stack data when the user siginfo_t has a positive si_code value. The top 16 bits of si_code descibe which fields in the siginfo_t union are active, but they are treated inconsistently between copy_siginfo_from_user32, copy_siginfo_to_user32 and copy_siginfo_to_user. copy_siginfo_from_user32 is called from rt_sigqueueinfo and rt_tgsigqueueinfo in which the user has full control overthe top 16 bits of si_code. This fixes the following information leaks: x86: 8 bytes leaked when sending a signal from a 32-bit process to itself. This leak grows to 16 bytes if the process uses x32. (si_code = __SI_CHLD) x86: 100 bytes leaked when sending a signal from a 32-bit process to a 64-bit process. (si_code = -1) sparc: 4 bytes leaked when sending a signal from a 32-bit process to a 64-bit process. (si_code = any) parsic and s390 have similar bugs, but they are not vulnerable because rt_[tg]sigqueueinfo have checks that prevent sending a positive si_code to a different process. These bugs are also fixed for consistency. Signed-off-by: Amanieu d'Antras <amanieu@gmail.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Chris Metcalf <cmetcalf@ezchip.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-08-05MIPS: Make set_pte() SMP safe.David Daney1-0/+31
On MIPS the GLOBAL bit of the PTE must have the same value in any aligned pair of PTEs. These pairs of PTEs are referred to as "buddies". In a SMP system is is possible for two CPUs to be calling set_pte() on adjacent PTEs at the same time. There is a race between setting the PTE and a different CPU setting the GLOBAL bit in its buddy PTE. This race can be observed when multiple CPUs are executing vmap()/vfree() at the same time. Make setting the buddy PTE's GLOBAL bit an atomic operation to close the race condition. The case of CONFIG_64BIT_PHYS_ADDR && CONFIG_CPU_MIPS32 is *not* handled. Signed-off-by: David Daney <david.daney@cavium.com> Cc: <stable@vger.kernel.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/10835/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-08-03MIPS: Replace add and sub instructions in relocate_kernel.S with addiuJames Cowgill1-4/+4
Fixes the assembler errors generated when compiling a MIPS R6 kernel with CONFIG_KEXEC on, by replacing the offending add and sub instructions with addiu instructions. Build errors: arch/mips/kernel/relocate_kernel.S: Assembler messages: arch/mips/kernel/relocate_kernel.S:27: Error: invalid operands `dadd $16,$16,8' arch/mips/kernel/relocate_kernel.S:64: Error: invalid operands `dadd $20,$20,8' arch/mips/kernel/relocate_kernel.S:65: Error: invalid operands `dadd $18,$18,8' arch/mips/kernel/relocate_kernel.S:66: Error: invalid operands `dsub $22,$22,1' scripts/Makefile.build:294: recipe for target 'arch/mips/kernel/relocate_kernel.o' failed Signed-off-by: James Cowgill <James.Cowgill@imgtec.com> Cc: <stable@vger.kernel.org> # 4.0+ Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/10558/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-08-03MIPS: Flush RPS on kernel entry with EVAJames Hogan1-0/+25
When EVA is enabled, flush the Return Prediction Stack (RPS) present on some MIPS cores on entry to the kernel from user mode. This is important specifically for interAptiv with EVA enabled, otherwise kernel mode RPS mispredicts may trigger speculative fetches of user return addresses, which may be sensitive in the kernel address space due to EVA's overlapping user/kernel address spaces. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Markos Chandras <markos.chandras@imgtec.com> Cc: Leonid Yegoshin <leonid.yegoshin@imgtec.com> Cc: linux-mips@linux-mips.org Cc: <stable@vger.kernel.org> # 3.15.x- Patchwork: https://patchwork.linux-mips.org/patch/10812/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-08-03Revert "MIPS: BCM63xx: Provide a plat_post_dma_flush hook"Florian Fainelli1-10/+0
This reverts commit 3cf29543413207d3ab1c3f62a88c09bb46f2264e ("MIPS: BCM63xx: Provide a plat_post_dma_flush hook") since this commit was found to prevent BCM6358 (early BMIPS4350 cores) and some BCM6368 (BMIPS4380 cores) from booting reliably. Alvaro was able to track this down to an issue specifically located to devices that use the second thread (TP1) when booting. Since BCM63xx did not have a need for plat_post_dma_flush() hook before, let's just keep things the way they were. Reported-by: Álvaro Fernández Rojas <noltari@gmail.com> Reported-by: Jonas Gorski <jogo@openwrt.org> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Cc: stable@vger.kernel.org Cc: Kevin Cernekee <cernekee@gmail.com> Cc: Nicolas Schichan <nschichan@freebox.fr> Cc: linux-mips@linux-mips.org Cc: blogic@openwrt.org Cc: noltari@gmail.com Cc: jogo@openwrt.org Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: stable@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/10804/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-08-03MIPS: BMIPS: Delete unused Kconfig symbolKevin Cernekee1-1/+0
This was left over from an earlier iteration of the BMIPS irqchip changes. It doesn't actually have an effect, so let's nuke it. Reported-by: Valentin Rothberg <valentinrothberg@gmail.com> Signed-off-by: Kevin Cernekee <cernekee@chromium.org> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Cc: stable@vger.kernel.org # v4.1+ Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/9910/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-08-03MIPS: Export get_c0_perfcount_int()Felix Fietkau6-0/+6
get_c0_perfcount_int is tested from oprofile code. If oprofile is compiled as module, get_c0_perfcount_int needs to be exported, otherwise it cannot be resolved. Fixes: a669efc4a3b4 ("MIPS: Add hook to get C0 performance counter interrupt") Cc: stable@vger.kernel.org # v3.19+ Signed-off-by: Felix Fietkau <nbd@openwrt.org> Cc: linux-mips@linux-mips.org Cc: abrestic@chromium.org Patchwork: https://patchwork.linux-mips.org/patch/10763/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-08-03MIPS: show_stack: Fix stack trace with EVAJames Hogan1-0/+7
The show_stack() function deals exclusively with kernel contexts, but if it gets called in user context with EVA enabled, show_stacktrace() will attempt to access the stack using EVA accesses, which will either read other user mapped data, or more likely cause an exception which will be handled by __get_user(). This is easily reproduced using SysRq t to show all task states, which results in the following stack dump output: Stack : (Bad stack address) Fix by setting the current user access mode to kernel around the call to show_stacktrace(). This causes __get_user() to use normal loads to read the kernel stack. Now we get the correct output, like this: Stack : 00000000 80168960 00000000 004a0000 00000000 00000000 8060016c 1f3abd0c 1f172cd8 8056f09c 7ff1e450 8014fc3c 00000001 806dd0b0 0000001d 00000002 1f17c6a0 1f17c804 1f17c6a0 8066f6e0 00000000 0000000a 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 0110e800 1f3abd6c 1f17c6a0 ... Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Markos Chandras <markos.chandras@imgtec.com> Cc: Leonid Yegoshin <leonid.yegoshin@imgtec.com> Cc: linux-mips@linux-mips.org Cc: <stable@vger.kernel.org> # 3.15+ Patchwork: https://patchwork.linux-mips.org/patch/10778/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-08-03MIPS: do_mcheck: Fix kernel code dump with EVAJames Hogan1-0/+6
If a machine check exception is raised in kernel mode, user context, with EVA enabled, then the do_mcheck handler will attempt to read the code around the EPC using EVA load instructions, i.e. as if the reads were from user mode. This will either read random user data if the process has anything mapped at the same address, or it will cause an exception which is handled by __get_user, resulting in this output: Code: (Bad address in epc) Fix by setting the current user access mode to kernel if the saved register context indicates the exception was taken in kernel mode. This causes __get_user to use normal loads to read the kernel code. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Markos Chandras <markos.chandras@imgtec.com> Cc: Leonid Yegoshin <leonid.yegoshin@imgtec.com> Cc: linux-mips@linux-mips.org Cc: <stable@vger.kernel.org> # 3.15+ Patchwork: https://patchwork.linux-mips.org/patch/10777/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-08-03MIPS: SMP: Don't increment irq_count multiple times for call function IPIsAlex Smith13-30/+29
The majority of SMP platforms handle their IPIs through do_IRQ() which calls irq_{enter/exit}(). When a call function IPI is received, smp_call_function_interrupt() is called which also calls irq_{enter,exit}(), meaning irq_count is raised twice. When tick broadcasting is used (which is implemented via a call function IPI), this incorrectly causes all CPU idle time on the core receiving broadcast ticks to be accounted as time spent servicing IRQs, as account_process_tick() will account as such if irq_count is greater than 1. This results in 100% CPU usage being reported on a core which receives its ticks via broadcast. This patch removes the SMP smp_call_function_interrupt() wrapper which calls irq_{enter,exit}(). Platforms which handle their IPIs through do_IRQ() now call generic_smp_call_function_interrupt() directly to avoid incrementing irq_count a second time. Platforms which don't (loongson, sgi-ip27, sibyte) call generic_smp_call_function_interrupt() wrapped in irq_{enter,exit}(). Signed-off-by: Alex Smith <alex.smith@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/10770/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-08-03MIPS: Partially disable RIXI support.Ralf Baechle1-4/+4
Execution of break instruction, trap instructions, emulation of unaligned loads or floating point instructions - anything that tries to read the instruction's opcode from userspace - needs read access to a page. RIXI (Read Inhibit / Execute Inhibit) support however allows the creation of pags that are executable but not readable. On such a mapping the attempted load of the opcode by the kernel is going to cause an endless loop of page faults. The quick workaround for this is to disable the combinations that the kernel currently isn't able to handle which are executable mappings. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-08-03MIPS: Handle page faults of executable but unreadable pages correctly.Ralf Baechle1-1/+2
Without this we end taking execeptions in an endless loop hanging the thread. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-08-03MIPS: Malta: Don't reinitialise RTCJames Hogan1-6/+9
On Malta, since commit a87ea88d8f6c ("MIPS: Malta: initialise the RTC at boot"), the RTC is reinitialised and forced into binary coded decimal (BCD) mode during init, even if the bootloader has already initialised it, and may even have already put it into binary mode (as YAMON does). This corrupts the current time, can result in the RTC seconds being an invalid BCD (e.g. 0x1a..0x1f) for up to 6 seconds, as well as confusing YAMON for a while after reset, enough for it to report timeouts when attempting to load from TFTP (it actually uses the RTC in that code). Therefore only initialise the RTC to the extent that is necessary so that Linux avoids interfering with the bootloader setup, while also allowing it to estimate the CPU frequency without hanging, without a bootloader necessarily having done anything with the RTC (for example when the kernel is loaded via EJTAG). The divider control is configured for a 32KHZ reference clock if necessary, and the SET bit of the RTC_CONTROL register is cleared if necessary without changing any other bits (this bit will be set when coming out of reset if the battery has been disconnected). Fixes: a87ea88d8f6c ("MIPS: Malta: initialise the RTC at boot") Signed-off-by: James Hogan <james.hogan@imgtec.com> Reviewed-by: Paul Burton <paul.burton@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Maciej W. Rozycki <macro@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: <stable@vger.kernel.org> # 3.14+ Patchwork: https://patchwork.linux-mips.org/patch/10739/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-08-03MIPS: unaligned: Fix build error on big endian R6 kernelsJames Cowgill1-1/+1
Commit eeb538950367 ("MIPS: unaligned: Prevent EVA instructions on kernel unaligned accesses") renamed the Load* and Store* defines in unaligned.c to _Load* and _Store* as part of its fix. One define was missed out which causes big endian R6 kernels to fail to build. arch/mips/kernel/unaligned.c:880:35: error: implicit declaration of function '_StoreDW' #define StoreDW(addr, value, res) _StoreDW(addr, value, res) ^ Signed-off-by: James Cowgill <James.Cowgill@imgtec.com> Fixes: eeb538950367 ("MIPS: unaligned: Prevent EVA instructions on kernel unaligned accesses") Cc: Markos Chandras <markos.chandras@imgtec.com> Cc: <stable@vger.kernel.org> # 4.0+ Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/10575/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-08-03MIPS: Fix sched_getaffinity with MT FPAFF enabledFelix Fietkau1-2/+3
p->thread.user_cpus_allowed is zero-initialized and is only filled on the first sched_setaffinity call. To avoid adding overhead in the task initialization codepath, simply OR the returned mask in sched_getaffinity with p->cpus_allowed. Cc: stable@vger.kernel.org Signed-off-by: Felix Fietkau <nbd@openwrt.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/10740/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-08-03MIPS: Fix build with CONFIG_OF=y for non OF-enabled targetsJonas Gorski1-1/+1
Commit 01306aeadd75 ("MIPS: prepare for user enabling of CONFIG_OF") changed the guards in asm/prom.h from CONFIG_OF to CONFIG_USE_OF, but missed the actual function declarations in kernel/prom.c, which have additional dependencies. Fixes the following build error: CC arch/mips/kernel/prom.o arch/mips/kernel/prom.c: In function '__dt_setup_arch': arch/mips/kernel/prom.c:54:2: error: implicit declaration of function 'early_init_dt_scan' [-Werror=implicit-function-declaration] if (!early_init_dt_scan(bph)) ^ Fixes: 01306aeadd75 ("MIPS: prepare for user enabling of CONFIG_OF") Signed-off-by: Jonas Gorski <jogo@openwrt.org> Acked-by: Rob Herring <robh@kernel.org> Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Cc: Grant Likely <grant.likely@linaro.org> Patchwork: https://patchwork.linux-mips.org/patch/10741/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-07-19Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds9-29/+7
Pull MIPS fixes from Ralf Baechle: "Another round of MIPS fixes for 4.2. Things are looking quite decent at this stage but the recent work on the FPU support took its toll: - fix an incorrect overly restrictive ifdef - select O32 64-bit FP support for O32 binary compatibility - remove workarounds for Sibyte SB1250 Pass1 parts. There are rare fixing the workarounds is not worth the effort. - patch up an outdated and now incorrect comment" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: MIPS: fpu.h: Allow 64-bit FPU on a 64-bit MIPS R6 CPU MIPS: SB1: Remove support for Pass 1 parts. MIPS: Require O32 FP64 support for MIPS64 with O32 compat MIPS: asm-offset.c: Patch up various comments refering to the old filename.
2015-07-19MIPS: fpu.h: Allow 64-bit FPU on a 64-bit MIPS R6 CPUMarkos Chandras1-1/+1
Commit 6134d94923d0 ("MIPS: asm: fpu: Allow 64-bit FPU on MIPS32 R6") added support for 64-bit FPU on a 32-bit MIPS R6 processor but it missed the 64-bit CPU case leading to FPU failures when requesting FR=1 mode (which is always the case for MIPS R6 userland) when running a 32-bit kernel on a 64-bit CPU. We also fix the MIPS R2 case. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Fixes: 6134d94923d0 ("MIPS: asm: fpu: Allow 64-bit FPU on MIPS32 R6") Reviewed-by: Paul Burton <paul.burton@imgtec.com> Cc: <stable@vger.kernel.org> # 4.0+ Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/10734/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-07-17mm: clean up per architecture MM hook header filesLaurent Dufour2-15/+1
Commit 2ae416b142b6 ("mm: new mm hook framework") introduced an empty header file (mm-arch-hooks.h) for every architecture, even those which doesn't need to define mm hooks. As suggested by Geert Uytterhoeven, this could be cleaned through the use of a generic header file included via each per architecture asm/include/Kbuild file. The PowerPC architecture is not impacted here since this architecture has to defined the arch_remap MM hook. Signed-off-by: Laurent Dufour <ldufour@linux.vnet.ibm.com> Suggested-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Vineet Gupta <vgupta@synopsys.com> Cc: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-16 01:58:14 +0000