summaryrefslogtreecommitdiff
path: root/arch/arm/mach-prima2
AgeCommit message (Collapse)AuthorFilesLines
2013-02-21Merge tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds16-33/+694
Pull ARM SoC-specific updates from Arnd Bergmann: "This is a larger set of new functionality for the existing SoC families, including: - vt8500 gains support for new CPU cores, notably the Cortex-A9 based wm8850 - prima2 gains support for the "marco" SoC family, its SMP based cousin - tegra gains support for the new Tegra4 (Tegra114) family - socfpga now supports a newer version of the hardware including SMP - i.mx31 and bcm2835 are now using DT probing for their clocks - lots of updates for sh-mobile - OMAP updates for clocks, power management and USB - i.mx6q and tegra now support cpuidle - kirkwood now supports PCIe hot plugging - tegra clock support is updated - tegra USB PHY probing gets implemented diffently" * tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (148 commits) ARM: prima2: remove duplicate v7_invalidate_l1 ARM: shmobile: r8a7779: Correct TMU clock support again ARM: prima2: fix __init section for cpu hotplug ARM: OMAP: Consolidate OMAP USB-HS platform data (part 3/3) ARM: OMAP: Consolidate OMAP USB-HS platform data (part 1/3) arm: socfpga: Add SMP support for actual socfpga harware arm: Add v7_invalidate_l1 to cache-v7.S arm: socfpga: Add entries to enable make dtbs socfpga arm: socfpga: Add new device tree source for actual socfpga HW ARM: tegra: sort Kconfig selects for Tegra114 ARM: tegra: enable ARCH_REQUIRE_GPIOLIB for Tegra114 ARM: tegra: Fix build error w/ ARCH_TEGRA_114_SOC w/o ARCH_TEGRA_3x_SOC ARM: tegra: Fix build error for gic update ARM: tegra: remove empty tegra_smp_init_cpus() ARM: shmobile: Register ARM architected timer ARM: MARCO: fix the build issue due to gic-vic-to-irqchip move ARM: shmobile: r8a7779: Correct TMU clock support ARM: mxs_defconfig: Select CONFIG_DEVTMPFS_MOUNT ARM: mxs: decrease mxs_clockevent_device.min_delta_ns to 2 clock cycles ARM: mxs: use apbx bus clock to drive the timers on timrotv2 ...
2013-02-20ARM: prima2: remove duplicate v7_invalidate_l1Arnd Bergmann1-40/+0
Patch c08e20d "arm: Add v7_invalidate_l1 to cache-v7.S" added a generic version of this function and removed all platform specific versions, while 4898de3 "ARM: PRIMA2: add new SiRFmarco SMP SoC infrastructures" added another one, leading to a link error. I verified that the two are identical, so we can just remove the one in mach-prima2. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-02-14ARM: prima2: fix __init section for cpu hotplugArnd Bergmann2-2/+3
The code in arch/arm/mach-prima2/headsmp.S is used for both boot time initialization and for cpu hotplug, so it must not be discarded after the initial boot is complete. This replaces the __INIT annotation with __CPUINIT, and marks the sirfsoc_cpu_die as __ref to annotate that it correctly uses the sections. Without this patch, building prima2_defconfig results in: WARNING: arch/arm/mach-prima2/built-in.o(.cpuinit.text+0x130): Section mismatch in reference from the function sirfsoc_boot_secondary() to the function .init.text:sirfsoc_secondary_startup() The function __cpuinit sirfsoc_boot_secondary() references a function __init sirfsoc_secondary_startup(). If sirfsoc_secondary_startup is only used by sirfsoc_boot_secondary then annotate sirfsoc_secondary_startup with a matching annotation. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Barry Song <baohua.song@csr.com>
2013-02-05Merge tag 'cleanup-decompwdog-3.9' of ↵Olof Johansson1-2/+0
git://git.linaro.org/people/shawnguo/linux-2.6 into next/cleanup From Shawn Guo: The series cleans up ARCH_HAS_DECOMP_WDOG and arch_decomp_wdog which are unused on ARM architecure. Samsung has some code setting up wdog in arch_decomp_wdog(). But since CONFIG_S3C_BOOT_WATCHDOG is defined nowhere, it will not run. Otherwise, system can not boot at all when wdog is set up but no one pats it. * tag 'cleanup-decompwdog-3.9' of git://git.linaro.org/people/shawnguo/linux-2.6: ARM: samsung: remove unused arch_decomp_wdog() code ARM: remove unused arch_decomp_wdog() ARM: decompress: remove unused ARCH_HAS_DECOMP_WDOG Signed-off-by: Olof Johansson <olof@lixom.net>
2013-02-04ARM: MARCO: fix the build issue due to gic-vic-to-irqchip moveBarry Song2-21/+3
Fix the issue: tree: git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc.git next/soc head: 6ed05a2aab3763b58922247543d7079106b254dc commit: af70fdc947dbe835acc26c6ee9e8e930f38935f8 [4/8] Merge branch 'marco-timer-cleanup-rebase' of git://gitorious.org/sirfprima2-kernel/sirfprima2-kernel into next/soc config: make ARCH=arm prima2_defconfig All error/warnings: >> arch/arm/mach-prima2/platsmp.c:20:30: fatal error: asm/hardware/gic.h: No such file or directory compilation terminated. -- >> arch/arm/mach-prima2/common.c:15:30: fatal error: asm/hardware/gic.h: No such file or directory compilation terminated. Signed-off-by: Barry Song <Baohua.Song@csr.com> Cc: Xie ChanglongX <changlongx.xie@intel.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-01-27Merge branch 'marco-timer-cleanup-rebase' of ↵Olof Johansson16-33/+751
git://gitorious.org/sirfprima2-kernel/sirfprima2-kernel into next/soc From Barry Song, this adds support for a new SoC from CSR; marco. It's SMP, uses GIC instead of VIC and in general needs a bit of rework of the platform code for setup, which this branch contains. * 'marco-timer-cleanup-rebase' of git://gitorious.org/sirfprima2-kernel/sirfprima2-kernel: ARM: PRIMA2: provide two DEBUG_LL ports for prima2 and marco ARM: PRIMA2: add new SiRFmarco SMP SoC infrastructures ARM: PRIMA2: irq: make prima2 irq can work even we enable GIC for Marco ARM: PRIMA2: rtciobg: it is also compatible with marco ARM: PRIMA2: rstc: enable the support for Marco ARM: PRIMA2: mv timer to timer-prima2 as we will add timer-marco ARM: PRIMA2: initialize l2x0 according to mach from DT ARM: PRIMA2: enable AUTO_ZRELADDR for SIRF in Kconfig ARM: PRIMA2: add CSR SiRFmarco device tree .dts Signed-off-by: Olof Johansson <olof@lixom.net>
2013-01-22ARM: PRIMA2: provide two DEBUG_LL ports for prima2 and marcoBarry Song2-0/+9
prima2 and marco has different memory base, the old code will fail if we enable DEBUG_LL in marco. this patch adds two debuf port, while debugging, we select one of PRIMA2 and MARCO debug ports, in the products, we disable DEBUG_LL. Signed-off-by: Barry Song <Baohua.Song@csr.com>
2013-01-22ARM: PRIMA2: add new SiRFmarco SMP SoC infrastructuresBarry Song8-1/+662
this patch adds tick timer, smp entries and generic DT machine for SiRFmarco dual-core SMP chips. with the added marco, we change the defconfig, using the same defconfig, we get a zImage which can work on both prima2 and marco. Signed-off-by: Barry Song <Baohua.Song@csr.com> Cc: Mark Rutland <mark.rutland@arm.com>
2013-01-22ARM: PRIMA2: irq: make prima2 irq can work even we enable GIC for MarcoBarry Song4-4/+21
in Marco, we will use GIC. this patch prepares the handle_irq for prima2 to avoid the compiling errors since we want only one defconfig and zImage for both prima2 and marco that means we will need handle_irq for both. Signed-off-by: Baohua Song <Baohua.Song@csr.com>
2013-01-22ARM: PRIMA2: rtciobg: it is also compatible with marcoBarry Song1-0/+1
Signed-off-by: Barry Song <Baohua.Song@csr.com>
2013-01-22ARM: PRIMA2: rstc: enable the support for MarcoBarry Song1-17/+28
marco has SET/CLEAR registers pair for rstc to avoid read-modify-write, this patch detects the mach typer and access registers based on SoC. Signed-off-by: Barry Song <Baohua.Song@csr.com>
2013-01-22ARM: PRIMA2: mv timer to timer-prima2 as we will add timer-marcoBarry Song4-6/+6
Marco timer has different timer IP with prima2, so rename the current timer to timer-prima2 so that we can add timer-marco. at the same time, if we don't find prima2 timer node in dt, don't panic the system as we will make prima2 and marco use same kernel image. Signed-off-by: Barry Song <Baohua.Song@csr.com>
2013-01-22ARM: PRIMA2: initialize l2x0 according to mach from DTBarry Song1-5/+24
prima2 and marco have diffetent l2 cache configuration, so we initialize l2x0 cache based on dtb given to kernel. Signed-off-by: Barry Song <Baohua.Song@csr.com> Reviewed-by: Mark Rutland <mark.rutland@arm.com>
2013-01-14Merge branch 'clocksource/cleanup' into next/cleanupOlof Johansson3-10/+4
Clockevent cleanup series from Shawn Guo. Resolved move/change conflict in mach-pxa/time.c due to the sys_timer cleanup. * clocksource/cleanup: clocksource: use clockevents_config_and_register() where possible ARM: use clockevents_config_and_register() where possible clockevents: export clockevents_config_and_register for module use + sync to Linux 3.8-rc3 Signed-off-by: Olof Johansson <olof@lixom.net> Conflicts: arch/arm/mach-pxa/time.c
2013-01-14ARM: use clockevents_config_and_register() where possibleShawn Guo1-8/+2
The clockevent core is able to figure out the best mult and shift, calculate min_delta_ns and max_delta_ns, with the necessary info passed into clockevents_config_and_register(). Use this combined configure and register function where possible to make the codes less error prone and gain some positive diff stat. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Reviewed-by: Anton Vorontsov <cbouatmailru@gmail.com> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Tested-by: Roland Stigge <stigge@antcom.de> Acked-by: Eric Miao <eric.y.miao@gmail.com> Cc: Haojian Zhuang <haojian.zhuang@gmail.com> Cc: David Brown <davidb@codeaurora.org> Tested-by: Tony Lindgren <tony@atomide.com> Acked-by: Barry Song <baohua.song@csr.com> Tested-by: Stephen Warren <swarren@nvidia.com> Acked-by: Tony Prisk <linux@prisktech.co.nz> Cc: Lennert Buytenhek <buytenh@wantstofly.org> Cc: Wan ZongShun <mcuos.com@gmail.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Jason Cooper <jason@lakedaemon.net> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-01-11ARM: remove unused arch_decomp_wdog()Shawn Guo1-2/+0
With ARCH_HAS_DECOMP_WDOG removed from arch/arm/boot/compressed/decompress.c, all the arch_decomp_wdog() definition at platform level is unneeded. Remmove it. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Jason Cooper <jason@lakedaemon.net>
2013-01-03ARM: drivers: remove __dev* attributes.Greg Kroah-Hartman2-2/+2
CONFIG_HOTPLUG is going away as an option. As a result, the __dev* markings need to be removed. This change removes the use of __devinit, __devexit_p, __devinitdata, and __devexit from these drivers. Based on patches originally written by Bill Pemberton, but redone by me in order to handle some of the coding style issues better, by hand. Cc: Bill Pemberton <wfp5p@virginia.edu> Cc: Russell King <linux@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-12-24ARM: delete struct sys_timerStephen Warren3-8/+4
Now that the only field in struct sys_timer is .init, delete the struct, and replace the machine descriptor .timer field with the initialization function itself. This will enable moving timer drivers into drivers/clocksource without having to place a public prototype of each struct sys_timer object into include/linux; the intent is to create a single of_clocksource_init() function that determines which timer driver to initialize by scanning the device dtree, much like the proposed irqchip_init() at: http://www.spinics.net/lists/arm-kernel/msg203686.html Includes mach-omap2 fixes from Igor Grinberg. Tested-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-10-15pinctrl: sirf: remove sirfsoc_gpio_set_pull functionArnd Bergmann1-13/+0
The prima2 platform advertises needing no mach/gpio.h header file, but its pinctrl driver now has a sirfsoc_gpio_set_pull function that uses constants defined in arch/arm/mach-prima2/include/mach/gpio.h, which fails to build. Fortunately, the sirfsoc_gpio_set_pull is not used anywhere in the kernel, so we can safely remove it. Any out of tree drivers using it will have to be converted to use proper pinctrl functions to do the same. Without this patch, building prima2_defconfig results in: drivers/pinctrl/pinctrl-sirf.c: In function 'sirfsoc_gpio_set_pull': drivers/pinctrl/pinctrl-sirf.c:1331:7: error: 'SIRFSOC_GPIO_PULL_NONE' undeclared (first use in this function) drivers/pinctrl/pinctrl-sirf.c:1331:7: note: each undeclared identifier is reported only once for each function it appears in drivers/pinctrl/pinctrl-sirf.c:1334:7: error: 'SIRFSOC_GPIO_PULL_UP' undeclared (first use in this function) drivers/pinctrl/pinctrl-sirf.c:1338:7: error: 'SIRFSOC_GPIO_PULL_DOWN' undeclared (first use in this function) Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Barry Song <Baohua.Song@csr.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-10-13ARM: config: sort select statements alphanumericallyRussell King1-1/+1
As suggested by Andrew Morton: This is a pet peeve of mine. Any time there's a long list of items (header file inclusions, kconfig entries, array initalisers, etc) and someone wants to add a new item, they *always* go and stick it at the end of the list. Guys, don't do this. Either put the new item into a randomly-chosen position or, probably better, alphanumerically sort the list. lets sort all our select statements alphanumerically. This commit was created by the following perl: while (<>) { while (/\\\s*$/) { $_ .= <>; } undef %selects if /^\s*config\s+/; if (/^\s+select\s+(\w+).*/) { if (defined($selects{$1})) { if ($selects{$1} eq $_) { print STDERR "Warning: removing duplicated $1 entry\n"; } else { print STDERR "Error: $1 differently selected\n". "\tOld: $selects{$1}\n". "\tNew: $_\n"; exit 1; } } $selects{$1} = $_; next; } if (%selects and (/^\s*$/ or /^\s+help/ or /^\s+---help---/ or /^endif/ or /^endchoice/)) { foreach $k (sort (keys %selects)) { print "$selects{$k}"; } undef %selects; } print; } if (%selects) { foreach $k (sort (keys %selects)) { print "$selects{$k}"; } } It found two duplicates: Warning: removing duplicated S5P_SETUP_MIPIPHY entry Warning: removing duplicated HARDIRQS_SW_RESEND entry and they are identical duplicates, hence the shrinkage in the diffstat of two lines. We have four testers reporting success of this change (Tony, Stephen, Linus and Sekhar.) Acked-by: Jason Cooper <jason@lakedaemon.net> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-10-01Merge tag 'multiplatform' of ↵Linus Torvalds1-2/+0
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM soc multiplatform enablement from Olof Johansson: "This is a pretty significant branch. It's the introduction of the first multiplatform support on ARM, and with this (and the later branch) merged, it is now possible to build one kernel that contains support for highbank, vexpress, mvebu, socfpga, and picoxcell. More platforms will be convered over in the next few releases. Two critical last things had to be done for this to be practical and possible: * Today each platform has its own include directory under mach-<mach>/include/mach/*, and traditionally that is where a lot of driver/platform shared definitions have gone, such as platform data structures. They now need to move out to a common location instead, and this branch moves a large number of those out to include/linux/platform_data. * Each platform used to list the device trees to compile for its boards in mach-<mach>/Makefile.boot. Both of the above changes will mean that there are some merge conflicts to come (and some to resolve here). It's a one-time move and once it settles in, we should be good for quite a while. Sorry for the overhead." Fix conflicts as per Olof. * tag 'multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (51 commits) ARM: add v7 multi-platform defconfig ARM: msm: Move core.h contents into common.h ARM: highbank: call highbank_pm_init from .init_machine ARM: dtb: move all dtb targets to common Makefile ARM: spear: move platform_data definitions ARM: samsung: move platform_data definitions ARM: orion: move platform_data definitions ARM: vexpress: convert to multi-platform ARM: initial multiplatform support ARM: mvebu: move armada-370-xp.h in mach dir ARM: vexpress: remove dependency on mach/* headers ARM: picoxcell: remove dependency on mach/* headers ARM: move all dtb targets out of Makefile.boot ARM: picoxcell: move debug macros to include/debug ARM: socfpga: move debug macros to include/debug ARM: mvebu: move debug macros to include/debug ARM: vexpress: move debug macros to include/debug ARM: highbank: move debug macros to include/debug ARM: move debug macros to common location ARM: make mach/gpio.h headers optional ...
2012-10-01Merge tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds1-0/+2
Pull ARM soc device tree updates from Olof Johansson: "Device tree conversion and enablement branch. Mostly a bunch of new bindings and setup for various platforms, but the Via/Winchip VT8500 platform is also converted over from being 100% legacy to now use device tree for probing. More of that will come for 3.8." Trivial conflicts due to removal of vt8500 files, and one documentation file that was added with slightly different contents both here and in the USb tree. * tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (212 commits) arm: vt8500: Fixup for missing gpio.h ARM: LPC32xx: LED fix in PHY3250 DTS file ARM: dt: mmp-dma: add binding file arm: vt8500: Update arch-vt8500 to devicetree support. arm: vt8500: gpio: Devicetree support for arch-vt8500 arm: vt8500: doc: Add device tree bindings for arch-vt8500 devices arm: vt8500: clk: Add Common Clock Framework support video: vt8500: Add devicetree support for vt8500-fb and wm8505-fb serial: vt8500: Add devicetree support for vt8500-serial rtc: vt8500: Add devicetree support for vt8500-rtc arm: vt8500: Add device tree files for VIA/Wondermedia SoC's ARM: tegra: Add Avionic Design Tamonten Evaluation Carrier support ARM: tegra: Add Avionic Design Medcom-Wide support ARM: tegra: Add Avionic Design Plutux support ARM: tegra: Add Avionic Design Tamonten support ARM: tegra: dts: Add pwm label ARM: ux500: Fix SSP register address format ARM: ux500: Apply tc3589x's GPIO/IRQ properties to HREF's DT ARM: ux500: Remove redundant #gpio-cell properties from Snowball DT ARM: ux500: Add all encompassing sound node to the HREF Device Tree ...
2012-09-22Merge branch 'cleanup/__iomem' into next/cleanupOlof Johansson1-2/+2
__iomem annotation cleanup branch from Arnd. * cleanup/__iomem: (21 commits) net: seeq: use __iomem pointers for MMIO video: da8xx-fb: use __iomem pointers for MMIO scsi: eesox: use __iomem pointers for MMIO serial: ks8695: use __iomem pointers for MMIO input: rpcmouse: use __iomem pointers for MMIO ARM: samsung: use __iomem pointers for MMIO ARM: spear13xx: use __iomem pointers for MMIO ARM: sa1100: use __iomem pointers for MMIO ARM: prima2: use __iomem pointers for MMIO ARM: nomadik: use __iomem pointers for MMIO ARM: msm: use __iomem pointers for MMIO ARM: lpc32xx: use __iomem pointers for MMIO ARM: ks8695: use __iomem pointers for MMIO ARM: ixp4xx: use __iomem pointers for MMIO ARM: iop32x: use __iomem pointers for MMIO ARM: iop13xx: use __iomem pointers for MMIO ARM: integrator: use __iomem pointers for MMIO ARM: imx: use __iomem pointers for MMIO ARM: ebsa110: use __iomem pointers for MMIO ARM: at91: use __iomem pointers for MMIO ... Signed-off-by: Olof Johansson <olof@lixom.net>
2012-09-20ARM: dtb: move all dtb targets to common MakefileOlof Johansson1-2/+0
Since the dtb targets have moved to arch/arm/boot/dts/Makefile, sweep the platforms that have had new targets added recently and move them over. While I was at it, I also made the dtb generation more generic, i.e. if the platform is enabled then all dtbs for that platform will be created. Signed-off-by: Olof Johansson <olof@lixom.net> Cc: Tony Lindgren <tony@atomide.com> Cc: David Brown <davidb@codeaurora.com> Cc: Barry Song <Baohua.Song@csr.com> Cc: Simon Horman <horms@verge.net.au> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Stephen Warren <swarren@wwwdotorg.org>
2012-09-20Merge branch 'next/dt' into next/multiplatformOlof Johansson1-0/+2
* next/dt: (182 commits) ARM: tegra: Add Avionic Design Tamonten Evaluation Carrier support ARM: tegra: Add Avionic Design Medcom-Wide support ARM: tegra: Add Avionic Design Plutux support ARM: tegra: Add Avionic Design Tamonten support ARM: tegra: dts: Add pwm label ARM: dt: tegra: whistler: configure power off ARM: mxs: m28evk: Disable OCOTP OUI loading ARM: imx6q: use pll2_pfd2_396m as the enfc_sel's parent ARM: dts: imx6q-sabrelite: add usbotg pinctrl support ARM: dts: imx23-olinuxino: Add USB host support ARM: dts: imx6q-sabrelite: add usbmisc device ARM: dts: mx23: Add USB resources ARM: dts: mxs: Add ethernetX to macX aliases ARM: msm: Remove non-DT targets from 8960 ARM: msm: Add DT support for 8960 ARM: msm: Move io mapping prototypes to common.h ARM: msm: Rename board-msm8x60 to signify its DT only status ARM: msm: Make 8660 a DT only target ARM: msm: Move 8660 to DT timer ARM: msm: Add DT support to msm_timer ...
2012-09-19ARM: prima2: use __iomem pointers for MMIOArnd Bergmann1-2/+2
ARM is moving to stricter checks on readl/write functions, so we need to use the correct types everywhere. Cc: Barry Song <baohua.song@csr.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-09-12Merge branch 'clk-3.7' of git://git.linaro.org/people/mturquette/linux into ↵Olof Johansson4-513/+7
next/dt * 'clk-3.7' of git://git.linaro.org/people/mturquette/linux: clk: add of_clk_src_onecell_get() support clk: ux500: Define smp_twd clock for u8500 mfd: dbx500: Provide a more accurate smp_twd clock clk: ux500: Support for prmcu_rate clock clk: Provide option for clk_get_rate to issue hw for new rate clock: max77686: Add driver for Maxim 77686 32Khz crystal oscillator. ARM: ux500: Switch to use common clock framework clk: ux500: Clock definitions for u8500 clk: ux500: First version of clock definitions for ux500 clk: ux500: Adapt PRCMU and PRCC clocks for common clk clk: versatile: make config option boolean clk: add Loongson1B clock support arm: mmp: make all SOCs use common clock by default clk: mmp: add clock definition for mmp2 clk: mmp: add clock definition for pxa910 clk: mmp: add clock definition for pxa168 clk: mmp: add mmp specific clocks clk: convert ARM RealView to common clk clk: prima2: move from arch/arm/mach to drivers/clk ARM: PRIMA2: convert to common clk and finish full clk tree
2012-09-05pinctrl: sirf: add DT-binding pinmux mapping supportBarry Song1-0/+2
This makes us possible to define pinmux mapping in board-specific DTS. prima2.dtsi provides all possible (groups,functions) configuration, and device in .dts select configurations from dtsi files. Signed-off-by: Barry Song <Baohua.Song@csr.com> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2012-08-28ARM: SIRF: make sirf irqchip driver optional since new SoCs will have GICBarry Song3-2/+6
New MARCO and POLO SoC use GIC, so make irq.c optional and enable it only if we enable ARCH_PRIMA2 in Kconfig Signed-off-by: Barry Song <Baohua.Song@csr.com>
2012-08-28ARM: PRIMA2: adjust Kconfig to support select SoC featuresBarry Song1-0/+15
Now we have primaII, but will include Marco and Polo in mach-prima2 as well. We add Kconfig menu so that we can select necessary SoC features. Signed-off-by: Barry Song <Baohua.Song@csr.com>
2012-08-28ARM: PRIMA2: use DT_MACHINE_START and convert to generic boardBarry Song2-6/+7
we will have SiRFMarco and SiRFPolo, all of them will be in the generic board. Signed-off-by: Barry Song <Baohua.Song@csr.com>
2012-08-24clk: prima2: move from arch/arm/mach to drivers/clkBarry Song2-1172/+0
Signed-off-by: Barry Song <Baohua.Song@csr.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2012-08-24ARM: PRIMA2: convert to common clk and finish full clk treeBinghua Duan3-266/+932
Commit 02c981c07bc95ac1e only implements a little part of primaII clk tree due to common clk framework was not ready at that time. This patch converts the old driver to common clk and finish the full clk tree. Signed-off-by: Binghua Duan <Binghua.Duan@csr.com> Signed-off-by: Barry Song <Baohua.Song@csr.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2012-08-02ARM: PRIMA2: delete redundant codes to restore LATCHED when timer resumesBarry Song1-3/+3
The only way to write LATCHED registers to write LATCH_BIT to LATCH register, that will latch COUNTER into LATCHED.e.g. writel_relaxed(SIRFSOC_TIMER_LATCH_BIT, sirfsoc_timer_base + SIRFSOC_TIMER_LATCH); Writing values to LATCHED registers directly is useless at all. Signed-off-by: Barry Song <Baohua.Song@csr.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-07-02PINCTRL: SiRF: add GPIO and GPIO irq support in CSR SiRFprimaIIBarry Song2-1/+14
In SiRFprimaII, Each GPIO pin can be configured as input or output independently. If a GPIO is configured as input, it can also be enabled as an interrupt source (either edge or level triggered). These pins must be either MUXed as GPIO or other function pads. Signed-off-by: Yuping Luo <yuping.luo@csr.com> Signed-off-by: Barry Song <Baohua.Song@csr.com> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2012-05-26Merge tag 'cleanup-initcall' of ↵Linus Torvalds3-2/+13
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull sweeping late_initcall cleanup for arm-soc from Olof Johansson: "This is a patch series from Shawn Guo that moves from individual late_initcalls() to using a member in the machine structure to invoke a platform's late initcalls. This cleanup is a step in the move towards multiplatform kernels since it would reduce the need to check for compatible platforms in each and every initcall." Fix up trivial conflicts in arch/arm/mach-{exynos/mach-universal_c210.c, imx/mach-cpuimx51.c, omap2/board-generic.c} due to changes nearby (and, in the case of cpuimx51.c the board support being deleted) * tag 'cleanup-initcall' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: ux500: use machine specific hook for late init ARM: tegra: use machine specific hook for late init ARM: shmobile: use machine specific hook for late init ARM: sa1100: use machine specific hook for late init ARM: s3c64xx: use machine specific hook for late init ARM: prima2: use machine specific hook for late init ARM: pnx4008: use machine specific hook for late init ARM: omap2: use machine specific hook for late init ARM: omap1: use machine specific hook for late init ARM: msm: use machine specific hook for late init ARM: imx: use machine specific hook for late init ARM: exynos: use machine specific hook for late init ARM: ep93xx: use machine specific hook for late init ARM: davinci: use machine specific hook for late init ARM: provide a late_initcall hook for platform initialization
2012-05-16ARM: PRIMA2: fix irq domain size and IRQ mask of internal interrupt controllerBarry Song1-2/+4
the old codes will cause 3.4 kernel warning as irq domain size is wrong: ------------[ cut here ]------------ WARNING: at kernel/irq/irqdomain.c:74 irq_domain_legacy_revmap+0x24/0x48() Modules linked in: [<c0013f50>] (unwind_backtrace+0x0/0xf8) from [<c001e7d8>] (warn_slowpath_common+0x54/0x64) [<c001e7d8>] (warn_slowpath_common+0x54/0x64) from [<c001e804>] (warn_slowpath_null+0x1c/0x24) [<c001e804>] (warn_slowpath_null+0x1c/0x24) from [<c005c3c4>] (irq_domain_legacy_revmap+0x24/0x48) [<c005c3c4>] (irq_domain_legacy_revmap+0x24/0x48) from [<c005c704>] (irq_create_mapping+0x20/0x120) [<c005c704>] (irq_create_mapping+0x20/0x120) from [<c005c880>] (irq_create_of_mapping+0x7c/0xf0) [<c005c880>] (irq_create_of_mapping+0x7c/0xf0) from [<c01a6c48>] (irq_of_parse_and_map+0x2c/0x34) [<c01a6c48>] (irq_of_parse_and_map+0x2c/0x34) from [<c01a6c68>] (of_irq_to_resource+0x18/0x74) [<c01a6c68>] (of_irq_to_resource+0x18/0x74) from [<c01a6ce8>] (of_irq_count+0x24/0x34) [<c01a6ce8>] (of_irq_count+0x24/0x34) from [<c01a7220>] (of_device_alloc+0x58/0x158) [<c01a7220>] (of_device_alloc+0x58/0x158) from [<c01a735c>] (of_platform_device_create_pdata+0x3c/0x80) [<c01a735c>] (of_platform_device_create_pdata+0x3c/0x80) from [<c01a7468>] (of_platform_bus_create+0xc8/0x190) [<c01a7468>] (of_platform_bus_create+0xc8/0x190) from [<c01a74cc>] (of_platform_bus_create+0x12c/0x190) ---[ end trace 1b75b31a2719ed32 ]--- Signed-off-by: Barry Song <Baohua.Song@csr.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-05-08ARM: prima2: use machine specific hook for late initShawn Guo3-2/+13
Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Reviewed-by: Barry Song <baohua.song@csr.com>
2012-03-29Merge tag 'cleanup2' of ↵Linus Torvalds1-16/+0
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull "ARM: cleanups of io includes" from Olof Johansson: "Rob Herring has done a sweeping change cleaning up all of the mach/io.h includes, moving some of the oft-repeated macros to a common location and removing a bunch of boiler plate. This is another step closer to a common zImage for multiple platforms." Fix up various fairly trivial conflicts (<mach/io.h> removal vs changes around it, tegra localtimer.o is *still* gone, yadda-yadda). * tag 'cleanup2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (29 commits) ARM: tegra: Include assembler.h in sleep.S to fix build break ARM: pxa: use common IOMEM definition ARM: dma-mapping: convert ARCH_HAS_DMA_SET_COHERENT_MASK to kconfig symbol ARM: __io abuse cleanup ARM: create a common IOMEM definition ARM: iop13xx: fix missing declaration of iop13xx_init_early ARM: fix ioremap/iounmap for !CONFIG_MMU ARM: kill off __mem_pci ARM: remove bunch of now unused mach/io.h files ARM: make mach/io.h include optional ARM: clps711x: remove unneeded include of mach/io.h ARM: dove: add explicit include of dove.h to addr-map.c ARM: at91: add explicit include of hardware.h to uncompressor ARM: ep93xx: clean-up mach/io.h ARM: tegra: clean-up mach/io.h ARM: orion5x: clean-up mach/io.h ARM: davinci: remove unneeded mach/io.h include [media] davinci: remove includes of mach/io.h ARM: OMAP: Remove remaining includes for mach/io.h ARM: msm: clean-up mach/io.h ...
2012-03-29Merge branch 'for-linus' of git://git.linaro.org/people/rmk/linux-armLinus Torvalds1-14/+7
Pull more ARM updates from Russell King. This got a fair number of conflicts with the <asm/system.h> split, but also with some other sparse-irq and header file include cleanups. They all looked pretty trivial, though. * 'for-linus' of git://git.linaro.org/people/rmk/linux-arm: (59 commits) ARM: fix Kconfig warning for HAVE_BPF_JIT ARM: 7361/1: provide XIP_VIRT_ADDR for no-MMU builds ARM: 7349/1: integrator: convert to sparse irqs ARM: 7259/3: net: JIT compiler for packet filters ARM: 7334/1: add jump label support ARM: 7333/2: jump label: detect %c support for ARM ARM: 7338/1: add support for early console output via semihosting ARM: use set_current_blocked() and block_sigmask() ARM: exec: remove redundant set_fs(USER_DS) ARM: 7332/1: extract out code patch function from kprobes ARM: 7331/1: extract out insn generation code from ftrace ARM: 7330/1: ftrace: use canonical Thumb-2 wide instruction format ARM: 7351/1: ftrace: remove useless memory checks ARM: 7316/1: kexec: EOI active and mask all interrupts in kexec crash path ARM: Versatile Express: add NO_IOPORT ARM: get rid of asm/irq.h in asm/prom.h ARM: 7319/1: Print debug info for SIGBUS in user faults ARM: 7318/1: gic: refactor irq_start assignment ARM: 7317/1: irq: avoid NULL check in for_each_irq_desc loop ARM: 7315/1: perf: add support for the Cortex-A7 PMU ...
2012-03-23Merge branch 'for-armsoc' of git://git.linaro.org/people/rmk/linux-armLinus Torvalds2-24/+0
Pull #1 ARM updates from Russell King: "This one covers stuff which Arnd is waiting for me to push, as this is shared between both our trees and probably other trees elsewhere. Essentially, this contains: - AMBA primecell device initializer updates - mostly shrinking the size of the device declarations in platform code to something more reasonable. - Getting rid of the NO_IRQ crap from AMBA primecell stuff. - Nicolas' idle cleanups. This in combination with the restart cleanups from the last merge window results in a great many mach/system.h files being deleted." Yay: ~80 files, ~2000 lines deleted. * 'for-armsoc' of git://git.linaro.org/people/rmk/linux-arm: (60 commits) ARM: remove disable_fiq and arch_ret_to_user macros ARM: make entry-macro.S depend on !MULTI_IRQ_HANDLER ARM: rpc: make default fiq handler run-time installed ARM: make arch_ret_to_user macro optional ARM: amba: samsung: use common amba device initializers ARM: amba: spear: use common amba device initializers ARM: amba: nomadik: use common amba device initializers ARM: amba: u300: use common amba device initializers ARM: amba: lpc32xx: use common amba device initializers ARM: amba: netx: use common amba device initializers ARM: amba: bcmring: use common amba device initializers ARM: amba: ep93xx: use common amba device initializers ARM: amba: omap2: use common amba device initializers ARM: amba: integrator: use common amba device initializers ARM: amba: realview: get rid of private platform amba_device initializer ARM: amba: versatile: get rid of private platform amba_device initializer ARM: amba: vexpress: get rid of private platform amba_device initializer ARM: amba: provide common initializers for static amba devices ARM: amba: make use of -1 IRQs warn ARM: amba: u300: get rid of NO_IRQ initializers ...
2012-03-06ARM: remove bunch of now unused mach/io.h filesRob Herring1-16/+0
Now that many platforms don't need mach/io.h, remove the unused ones. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Jamie Iles <jamie@jamieiles.com> Acked-by: Pawel Moll <pawel.moll@arm.com> Acked-by: Nicolas Pitre <nico@linaro.org>
2012-02-22Merge branch 'entry-macro-cleanup' of git://sources.calxeda.com/kernel/linux ↵Russell King1-7/+0
into for-armsoc
2012-02-21ARM: remove disable_fiq and arch_ret_to_user macrosRob Herring1-7/+0
Now that most platforms don't need disable_fiq and arch_ret_to_user macros, we can remove the empty macros or empty entry-macro.S files. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Jamie Iles <jamie@jamieiles.com> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Ryan Mallon <rmallon@gmail.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Shawn Guo <shawn.guo@linaro.org>
2012-02-16irq_domain: Remove irq_domain_add_simple()Grant Likely1-1/+1
irq_domain_add_simple() was a stop-gap measure until complete irq_domain support was complete. This patch removes the irq_domain_add_simple() interface. This patch also drops the explicit irq_domain initialization performed by the mach-versatile code because the versatile interrupt controller already has irq_domain support built into it. This was a bug that was hanging around quietly for a while, but with the full irq_domain which actually verifies that irq_domain ranges are available it would cause the registration to fail and the system wouldn't boot. v4: Fixed number of irqs in mx5 gpio code v2: Updated to pass in host_data pointer on irq_domain allocation. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Milton Miller <miltonm@bga.com> Cc: Russell King <linux@arm.linux.org.uk> Tested-by: Olof Johansson <olof@lixom.net>
2012-02-03ARM: prima2: convert to common sched_clock() implementationMarc Zyngier1-14/+7
Prima2 has its own sched_clock() implementation, which gets in the way of a single zImage. Moving to the common sched_clock framework makes the code slightly cleaner (the mapping hack in sched_clock() goes away...). Acked-by: Barry Song <baohua.song@csr.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2012-01-20ARM: big removal of now unused arch_idle()Nicolas Pitre1-17/+0
When this is the only content remaining in mach/system.h then the whole file is removed. Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-and-tested-by: Jamie Iles <jamie@jamieiles.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: David Brown <davidb@codeaurora.org> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2012-01-05Merge branch 'restart' into for-linusRussell King4-12/+9
Conflicts: arch/arm/mach-exynos/cpu.c The changes to arch/arm/mach-exynos/cpu.c were moved to mach-exynos/common.c.
2012-01-05Merge branch 'devel-stable' into for-linusRussell King2-18/+4
Conflicts: arch/arm/kernel/setup.c arch/arm/mach-shmobile/board-kota2.c
2012-01-05ARM: restart: remove the now empty arch_reset()Russell King1-4/+0
Remove the now empty arch_reset() from all the mach/system.h includes, and remove its callsite. Remove arm_machine_restart() as this function no longer does anything useful. For samsung platforms, remove the include of mach/system-reset.h and plat/system-reset.h from their respective mach/system.h headers as these just define their arch_reset functions. As a result, the s3c2410 and plat-samsung system-reset.h files are no longer referenced, so remove these files entirely. Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Jamie Iles <jamie@jamieiles.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-14 19:37:38 +0000