summaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts/at91sam9261.dtsi
AgeCommit message (Collapse)AuthorFilesLines
2020-09-16ARM: dts: at91: add unit-address to memory nodeAlexandre Belloni1-1/+1
The memory node requires a unit-address, add it. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Reviewed-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20200831171129.3886857-7-alexandre.belloni@bootlin.com
2020-09-03ARM: dts: at91: fix sram nodesAlexandre Belloni1-0/+3
The ranges, #address-cells and #size-cells properties are mandatory, add them to the sram nodes. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Reviewed-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20200831171129.3886857-4-alexandre.belloni@bootlin.com
2020-09-03ARM: dts: at91: fix cpu nodeAlexandre Belloni1-2/+3
The reg property is mandatory for cpu nodes, also fix the #address-cells of the cpus node that has to be at least 1. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Reviewed-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20200831171129.3886857-2-alexandre.belloni@bootlin.com
2019-12-10ARM: dts: at91: Reenable UART TX pull-upsIngo van Lil1-3/+3
Pull-ups for SAM9 UART/USART TX lines were disabled in a previous commit. However, several chips in the SAM9 family require pull-ups to prevent the TX lines from falling (and causing an endless break condition) when the transceiver is disabled. From the SAM9G20 datasheet, 32.5.1: "To prevent the TXD line from falling when the USART is disabled, the use of an internal pull up is mandatory.". This commit reenables the pull-ups for all chips having that sentence in their datasheets. Fixes: 5e04822f7db5 ("ARM: dts: at91: fixes uart pinctrl, set pullup on rx, clear pullup on tx") Signed-off-by: Ingo van Lil <inguin@gmx.de> Cc: Peter Rosin <peda@axentia.se> Link: https://lore.kernel.org/r/20191203142147.875227-1-inguin@gmx.de Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 190Thomas Gleixner1-2/+1
Based on 1 normalized pattern(s): licensed under gplv2 only extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 10 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Steve Winslow <swinslow@gmail.com> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190528170027.071422096@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-30ARM: dts: Kill off skeleton{64}.dtsiRob Herring1-1/+3
Remove the usage of skeleton.dtsi in the remaining dts files. It was deprecated since commit 9c0da3cc61f1 ("ARM: dts: explicitly mark skeleton.dtsi as deprecated"). This will make adding a unit-address to memory nodes easier. The main tricky part to removing skeleton.dtsi is we could end up with no /memory node at all when a bootloader depends on one being present. I hacked up dtc to check for this condition. Acked-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Antoine Tenart <antoine.tenart@bootlin.com> Acked-by: Alexandre TORGUE <alexandre.torgue@st.com> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Acked-by: Vladimir Zapolskiy <vz@mleia.com> Tested-by: Kevin Hilman <khilman@baylibre.com> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Gregory CLEMENT <gregory.clement@bootlin.com> Tested-by: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-11-21ARM: dts: at91: at91sam9261: switch to new clock bindingsAlexandre Belloni1-264/+23
Switch at91sam9261 boards to the new PMC clock bindings. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-06-20ARM: dts: fix PMC compatibleAlexandre Belloni1-1/+1
Make each SoC dtsi use its soc specific PMc compatible string. This solves a potential issue on at91sam9261 and at91sam9263 when using suspend to RAM Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-03-21ARM: dts: at91: fixes uart pinctrl, set pullup on rx, clear pullup on txPeter Rosin1-6/+6
Remove pullup on uart TX signals, they are push-pull outputs thus pullups are pointless. Add pullup on uart RX signals, they prevent the RX signals to be left floating and so consuming a useless extra amount of power in crowbarred state if nothing is connected to RX. Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2017-12-31ARM: dts: at91: at91sam9261: TC blocks are also simple-mfd and syscon devicesAlexandre Belloni1-1/+3
Add simple-mfd and syscon to the TC blocks to allow to register one of the channels as clocksource properly at boot time and free up the remaining channels for other use. Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-12-31ARM: dts: at91: Remove leading 0x and 0s from bindings notationMathieu Malaterre1-1/+1
Improve the DTS files by removing all the leading "0x" and zeros to fix the following dtc warnings: Warning (unit_address_format): Node /XXX unit name should not have leading "0x" and Warning (unit_address_format): Node /XXX unit name should not have leading 0s Converted using the following command: find . -type f \( -iname *.dts -o -iname *.dtsi \) -exec sed -i -e "s/@\([0-9a-fA-FxX\.;:#]+\)\s*{/@\L\1 {/g" -e "s/@0x\(.*\) {/@\1 {/g" -e "s/@0+\(.*\) {/@\1 {/g" {} +^C For simplicity, two sed expressions were used to solve each warnings separately. To make the regex expression more robust a few other issues were resolved, namely setting unit-address to lower case, and adding a whitespace before the the opening curly brace: https://elinux.org/Device_Tree_Linux#Linux_conventions This will solve as a side effect warning: Warning (simple_bus_reg): Node /XXX@<UPPER> simple-bus unit address format error, expected "<lower>" This is a follow up to commit 4c9847b7375a ("dt-bindings: Remove leading 0x from bindings notation") Reported-by: David Daney <ddaney@caviumnetworks.com> Suggested-by: Rob Herring <robh@kernel.org> Signed-off-by: Mathieu Malaterre <malat@debian.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-10-20arm: dts: fix unit-address leading 0sRob Herring1-2/+2
Fix dtc warnings for 'simple_bus_reg' due to leading 0s. Converted using the following command: perl -p -i -e 's/\@0+([0-9a-f])/\@$1/g' `find arch/arm/boot/dts -type -f -name '*.dts*' Dropped changes to ARM, Ltd. boards LED nodes and manually fixed up some occurrences of uppercase hex. Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2017-05-31ARM: dts: at91: Switch to the new NAND bindingsBoris Brezillon1-18/+6
Use the new EBI/NAND bindings to declare NAND chips and remove old NAND nodes along the way. Note that we keep using old bindings in at91rm9200.dtsi because this SoC is not supported by the EBI driver. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Tested-by: Peter Rosin <peda@axentia.se> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-05-31ARM: dts: at91: Declare EBI/NAND controllersBoris Brezillon1-0/+32
Declare new nodes for the EBI and NAND controllers embedded in various at91/sama5 SoCs. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-03-05ARM: dts: at91: Fix matrix compatibleBoris Brezillon1-1/+1
The matrix node was defined before the documentation for the bus matrix configuration was submitted. Patch the device tree to match the DT doc. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-10-20ARM: dts: at91: fixes dbgu pinctrl, set pullup on rx, clear pullup on txSylvain Rochet1-2/+2
Remove pullup on dbgu DTXD signal, it is a push-pull output thus the pullup is pointless. Add pullup on dbgu DRXD signal, it prevents the DRXD signal to be left floating and so consuming a useless extra amount of power in crowbarred state if nothing is externally connected to dbgu. Signed-off-by: Sylvain Rochet <sylvain.rochet@finsecur.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-07-15ARM: dts: at91: fix i2c-gpio node nameAlexandre Belloni1-1/+1
i2c-gpio doesn't need a reg property. Change the node names to i2c-gpio-x as used in other dts to remove the unit-address. Solves: Warning (unit_address_vs_reg): Node /i2c@0 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /i2c@1 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /i2c@2 has a unit name, but no reg property Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2015-10-19ARM: at91/dt: use syscon for PMCAlexandre Belloni1-1/+1
The PMC is not only used to drive the clocks but also has some registers related to other functions. One of those is for example the USB gadget bias. Using a syscon allows to properly separate those functions. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2015-08-07ARM: at91/dt: at91sam9261: use slow clock where necessaryAlexandre Belloni1-2/+5
The watchdog, the reset controller, the real-time timer, the shutdown controller and the timer counter need the slow clock, add it where necessary. Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2015-05-22ARM: at91/dt: remove useless usb clockBoris Brezillon1-2/+2
The ohci driver now calls clk_set_rate on the uhpck clock (which forwards set_rate requests to its parent: the usb clock). Remove useless references to usb clocks from ohci definitions. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-13ARM: at91/dt: introduce atmel,<chip>-dbguAlexandre Belloni1-1/+1
The DBGU is not a simple UART and we need to be able to distinguish it from the other UARTs, in particular to get its address and check the chip id. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-11ARM: at91/dt: fix at91 udc compatible stringsBoris Brezillon1-1/+2
The at91rm9200, at91sam9260, at91sam9261 and at91sam9263 SoCs have slightly different UDC IPs. Those differences were previously handled with cpu_is_at91xx macro which are about to be dropped for multi-platform support, thus we need to change compatible strings. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-11ARM: at91/dt: declare matrix node as a syscon deviceBoris Brezillon1-1/+1
There is no specific driver handling the AHB matrix, this is a simple syscon device. the matrix is needed by several other drivers including the USB on some SoCs (at91sam9261 for instance). Without this definition, the USB will not work on these SoCs. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-09ARM: at91/dt: at91sam9261: fix clocks and clock-names in udc definitionBoris Brezillon1-2/+2
Peripheral clock is named pclk and system clock is named hclk (those are the names expected by the at91_udc driver). Drop the deprecated usb_clk (formerly used to configure the usb clock rate which is now directly configurable through hclk). Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-01-15ARM: at91/dt: add SRAM nodesAlexandre Belloni1-0/+5
Add nodes for the SRAM available on atmel SoCs For the at91sam9260 and the at91sam9g20, address mirroring is used to create a single contiguous SRAM range instead of declaring two separate banks. Also remove leftover TODOs in the sam9g45 file Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> [nicolas.ferre@atmel.com: correct at91sam9rl sram size => 0x10000] Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-11-19ARM: at91/dt: add GPBR nodesBoris Brezillon1-0/+6
Add GPBR (General Purpose Block Backup Registers) nodes. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-11-19ARM: at91/dt: add RTT nodes to at91 dtsisBoris Brezillon1-0/+8
at91sam926x, at91sam9g45 and at91sam9rl SoCs all have at least one RTT block. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-07-09ARM: at91/dt: sam9261 crystals under the clocks nodeAlexandre Belloni1-9/+11
Having clocks grouped in a subnode is common practice, so move the crystals under a clocks node for the at91sam9261 SoC and at91sam9261 based boards. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Boris BREZILLON <boris.brezillon@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-06-25ARM: at91/dt: sam9261: remove slow RC oscAlexandre Belloni1-15/+2
The at91sam9261 doesn't actually have a slow RC oscillator, remove it from the dtsi. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Boris BREZILLON <boris.brezillon@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-06-25ARM: at91/dt: sam9261: correctly define mainckAlexandre Belloni1-2/+8
mainck (CKGR_MCFR register) is actually using main_osc (CKGR_MOR register). Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Boris BREZILLON <boris.brezillon@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-05-23Merge tag 'at91-dt3' of git://github.com/at91linux/linux-at91 into next/dtArnd Bergmann1-1/+1
3.16 third DT series: - move of both at91sam9n12 and at91sam9x5 to CCF * tag 'at91-dt3' of git://github.com/at91linux/linux-at91: ARM: at91: move sam9n12 SoC to the CCF ARM: at91/dt: define sam9n12ek crystal frequencies ARM: at91/dt: define sam9n12 clocks ARM: at91: prepare common clk transition for sam9n12 SoC ARM: at91: move sam9x5 SoCs to the CCF ARM: at91/dt: define sam9x5ek's crystal frequencies ARM: at91/dt: define sam9x5 clocks ARM: at91: prepare common clk transition for sam9x5 SoCs dt-bindings: clock: Move at91.h to dt-bindigs/clock ARM: at91: fix spi cs on sama5d3 Xplained board Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-05-23Merge branch 'at91/cleanup' into next/dtArnd Bergmann1-2/+21
Conflicts: arch/arm/boot/dts/at91sam9rl.dtsi Needed as a dependency for the at91/dt2 branch Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-05-22Merge branch 'at91-3.16-cleanup' into at91-3.16-dt3Nicolas Ferre1-2/+21
2014-05-12ARM: at91/dt: sam9261: Add ssc2, SSC clocks and pcksAlexandre Belloni1-0/+103
Add ssc2 support, ssc2 pinctrl and clocks for the three SSCs. Also add support for the programmable clocks. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-05-12ARM: at91/dt: sam9261: Fix PLL output ranges and other clocks divisorsAlexandre Belloni1-5/+6
Argument 3 (OUT) and 4 (ICPLL) of the atmel,pll-clk-output-ranges were missing. Also, the at91sam9261 doesn't really have a by 3 divisor. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-05-07ARM: at91/dt: move at91sam9261 SoC to the new main clock modelBoris BREZILLON1-2/+21
Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com> Acked-by: Jean-Jacques HIBLOT <jjhiblot@traphandler.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-04-18dt-bindings: clock: Move at91.h to dt-bindigs/clockTushar Behera1-1/+1
Most of the clock related dt-binding header files are located in dt-bindings/clock folder. It would be good to keep all the similar header files at a single location. Signed-off-by: Tushar Behera <tushar.behera@linaro.org> CC: Rob Landley <rob@landley.net> CC: Andrew Victor <linux@maxim.org.za> CC: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Acked-by: Boris BREZILLON <b.brezillon.dev@gmail.com> [nicolas.ferre@atmel.com: add new at91sam9261 & at91sam9rl] Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-03-12ARM: at91: dt: Add at91sam9261 dt SoC supportJean-Jacques Hiblot1-0/+735
This patch adds support for the Device Tree on a sam9261-based platform Signed-off-by: Jean-Jacques Hiblot <jjhiblot@traphandler.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-14 22:59:08 +0000