| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
"Three interrupt related fixes for X86:
- Move disabling of the local APIC after invoking fixup_irqs() to
ensure that interrupts which are incoming are noted in the IRR and
not ignored.
- Unbreak affinity setting.
The rework of the entry code reused the regular exception entry
code for device interrupts. The vector number is pushed into the
errorcode slot on the stack which is then lifted into an argument
and set to -1 because that's regs->orig_ax which is used in quite
some places to check whether the entry came from a syscall.
But it was overlooked that orig_ax is used in the affinity cleanup
code to validate whether the interrupt has arrived on the new
target. It turned out that this vector check is pointless because
interrupts are never moved from one vector to another on the same
CPU. That check is a historical leftover from the time where x86
supported multi-CPU affinities, but not longer needed with the now
strict single CPU affinity. Famous last words ...
- Add a missing check for an empty cpumask into the matrix allocator.
The affinity change added a warning to catch the case where an
interrupt is moved on the same CPU to a different vector. This
triggers because a condition with an empty cpumask returns an
assignment from the allocator as the allocator uses for_each_cpu()
without checking the cpumask for being empty. The historical
inconsistent for_each_cpu() behaviour of ignoring the cpumask and
unconditionally claiming that CPU0 is in the mask struck again.
Sigh.
plus a new entry into the MAINTAINER file for the HPE/UV platform"
* tag 'x86-urgent-2020-08-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq/matrix: Deal with the sillyness of for_each_cpu() on UP
x86/irq: Unbreak interrupt affinity setting
x86/hotplug: Silence APIC only after all interrupts are migrated
MAINTAINERS: Add entry for HPE Superdome Flex (UV) maintainers
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Thomas Gleixner:
"A set of fixes for interrupt chip drivers:
- Revert the platform driver conversion of interrupt chip drivers as
it turned out to create more problems than it solves.
- Fix a trivial typo in the new module helpers which made probing
reliably fail.
- Small fixes in the STM32 and MIPS Ingenic drivers
- The TI firmware rework which had badly managed dependencies and had
to wait post rc1"
* tag 'irq-urgent-2020-08-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/ingenic: Leave parent IRQ unmasked on suspend
irqchip/stm32-exti: Avoid losing interrupts due to clearing pending bits by mistake
irqchip: Revert modular support for drivers using IRQCHIP_PLATFORM_DRIVER helperse
irqchip: Fix probing deferal when using IRQCHIP_PLATFORM_DRIVER helpers
arm64: dts: k3-am65: Update the RM resource types
arm64: dts: k3-am65: ti-sci-inta/intr: Update to latest bindings
arm64: dts: k3-j721e: ti-sci-inta/intr: Update to latest bindings
irqchip/ti-sci-inta: Add support for INTA directly connecting to GIC
irqchip/ti-sci-inta: Do not store TISCI device id in platform device id field
dt-bindings: irqchip: Convert ti, sci-inta bindings to yaml
dt-bindings: irqchip: ti, sci-inta: Update docs to support different parent.
irqchip/ti-sci-intr: Add support for INTR being a parent to INTR
dt-bindings: irqchip: Convert ti, sci-intr bindings to yaml
dt-bindings: irqchip: ti, sci-intr: Update bindings to drop the usage of gic as parent
firmware: ti_sci: Add support for getting resource with subtype
firmware: ti_sci: Drop unused structure ti_sci_rm_type_map
firmware: ti_sci: Drop the device id to resource type translation
|
|
Add an entry and email addresses for people at HPE who are supporting
Linux on the Superdome Flex (a.k.a) UV platform.
[ bp: Capitalize "linux" too :) ]
Signed-off-by: Steve Wahl <steve.wahl@hpe.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200824221439.GA52810@swahl-home.5wahls.com
|
|
Pull block fixes from Jens Axboe:
- NVMe pull request from Sagi:
- nvme completion rework from Christoph and Chao that mostly came
from a bit of divergence of how we classify errors related to
pathing/retry etc.
- nvmet passthru fixes from Chaitanya
- minor nvmet fixes from Amit and I
- mpath round-robin path selection fix from Martin
- ignore noiob for zoned devices from Keith
- minor nvme-fc fix from Tianjia"
- BFQ cgroup leak fix (Dmitry)
- block layer MAINTAINERS addition (Geert)
- fix null_blk FUA checking (Hou)
- get_max_io_size() size fix (Keith)
- fix block page_is_mergeable() for compound pages (Matthew)
- discard granularity fixes (Ming)
- IO scheduler ordering fix (Ming)
- misc fixes
* tag 'io_uring-5.9-2020-08-23' of git://git.kernel.dk/linux-block: (31 commits)
null_blk: fix passing of REQ_FUA flag in null_handle_rq
nvmet: Disable keep-alive timer when kato is cleared to 0h
nvme: redirect commands on dying queue
nvme: just check the status code type in nvme_is_path_error
nvme: refactor command completion
nvme: rename and document nvme_end_request
nvme: skip noiob for zoned devices
nvme-pci: fix PRP pool size
nvme-pci: Use u32 for nvme_dev.q_depth and nvme_queue.q_depth
nvme: Use spin_lock_irq() when taking the ctrl->lock
nvmet: call blk_mq_free_request() directly
nvmet: fix oops in pt cmd execution
nvmet: add ns tear down label for pt-cmd handling
nvme: multipath: round-robin: eliminate "fallback" variable
nvme: multipath: round-robin: fix single non-optimized path case
nvme-fc: Fix wrong return value in __nvme_fc_init_request()
nvmet-passthru: Reject commands with non-sgl flags set
nvmet: fix a memory leak
blkcg: fix memleak for iolatency
MAINTAINERS: Add missing header files to BLOCK LAYER section
...
|
|
The various <linux/blk*.h> header files are part of the Block Layer.
Add them to the corresponding section in the MAINTAINERS file, so
scripts/get_maintainer.pl will pick them up.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Mellanox and Cumulus Network were acquired by Nvidia, so change the
maintainers emails to new domain name.
Link: https://lore.kernel.org/r/20200810091100.243932-1-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
In order to automate the verification of DT nodes convert
ti,sci-inta.txt ti,sci-inta.yaml.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200806074826.24607-9-lokeshvutla@ti.com
|
|
In order to automate the verification of DT nodes convert
ti,sci-intr.txt ti,sci-intr.yaml.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200806074826.24607-6-lokeshvutla@ti.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull more perf tools updates from Arnaldo Carvalho de Melo:
"Fixes:
- Fixes for 'perf bench numa'.
- Always memset source before memcpy in 'perf bench mem'.
- Quote CC and CXX for their arguments to fix build in environments
using those variables to pass more than just the compiler names.
- Fix module symbol processing, addressing regression detected via
"perf test".
- Allow multiple probes in record+script_probe_vfs_getname.sh 'perf
test' entry.
Improvements:
- Add script to autogenerate socket family name id->string table from
copy of kernel header, used so far in 'perf trace'.
- 'perf ftrace' improvements to provide similar options for this
utility so that one can go from 'perf record', 'perf trace', etc to
'perf ftrace' just by changing the name of the subcommand.
- Prefer new "sched:sched_waking" trace event when it exists in 'perf
sched' post processing.
- Update POWER9 metrics to utilize other metrics.
- Fall back to querying debuginfod if debuginfo not found locally.
Miscellaneous:
- Sync various kvm headers with kernel sources"
* tag 'perf-tools-2020-08-14' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (40 commits)
perf ftrace: Make option description initials all capital letters
perf build-ids: Fall back to debuginfod query if debuginfo not found
perf bench numa: Remove dead code in parse_nodes_opt()
perf stat: Update POWER9 metrics to utilize other metrics
perf ftrace: Add change log
perf: ftrace: Add set_tracing_options() to set all trace options
perf ftrace: Add option --tid to filter by thread id
perf ftrace: Add option -D/--delay to delay tracing
perf: ftrace: Allow set graph depth by '--graph-opts'
perf ftrace: Add support for trace option tracing_thresh
perf ftrace: Add option 'verbose' to show more info for graph tracer
perf ftrace: Add support for tracing option 'irq-info'
perf ftrace: Add support for trace option funcgraph-irqs
perf ftrace: Add support for trace option sleep-time
perf ftrace: Add support for tracing option 'func_stack_trace'
perf tools: Add general function to parse sublevel options
perf ftrace: Add option '--inherit' to trace children processes
perf ftrace: Show trace column header
perf ftrace: Add option '-m/--buffer-size' to set per-cpu buffer size
perf ftrace: Factor out function write_tracing_file_int()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"Core Frameworks
- Make better attempt at matching device with the correct OF node
- Allow batch removal of hierarchical sub-devices
New Drivers
- Add STM32 Clocksource driver
- Add support for Khadas System Control Microcontroller
Driver Removal
- Remove unused driver for TI's SMSC ECE1099
New Device Support
- Add support for Intel Emmitsburg PCH to Intel LPSS PCI
- Add support for Intel Tiger Lake PCH-H to Intel LPSS PCI
- Add support for Dialog DA revision to Dialog DA9063
New Functionality
- Add support for AXP803 to be probed by I2C
Fix-ups
- Numerous W=1 warning fixes
- Device Tree changes (stm32-lptimer, gateworks-gsc, khadas,mcu, stmfx, cros-ec, j721e-system-controller)
- Enabled Regmap 'fast I/O' in stm32-lptimer
- Change BUG_ON to WARN_ON in arizona-core
- Remove superfluous code/initialisation (madera, max14577)
- Trivial formatting/spelling issues (madera-core, madera-i2c, da9055, max77693-private)
- Switch to of_platform_populate() in sprd-sc27xx-spi
- Expand out set/get brightness/pwm macros in lm3533-ctrlbank
- Disable IRQs on suspend in motorola-cpcap
- Clean-up error handling in intel_soc_pmic_mrfld
- Ensure correct removal order of sub-devices in madera
- Many s/HTTP/HTTPS/ link changes
- Ensure name used with Regmap is unique in syscon
Bug Fixes
- Properly 'put' clock on unbind and error in arizona-core
- Fix revision handling in da9063
- Fix 'assignment of read-only location' error in kempld-core
- Avoid using the Regmap API when atomic in rn5t618
- Redefine volatile register description in rn5t618
- Use locking to protect event handler in dln2"
* tag 'mfd-next-5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (76 commits)
mfd: syscon: Use a unique name with regmap_config
mfd: Replace HTTP links with HTTPS ones
mfd: dln2: Run event handler loop under spinlock
mfd: madera: Improve handling of regulator unbinding
mfd: mfd-core: Add mechanism for removal of a subset of children
mfd: intel_soc_pmic_mrfld: Simplify the return expression of intel_scu_ipc_dev_iowrite8()
mfd: max14577: Remove redundant initialization of variable current_bits
mfd: rn5t618: Fix caching of battery related registers
mfd: max77693-private: Drop a duplicated word
mfd: da9055: pdata.h: Drop a duplicated word
mfd: rn5t618: Make restart handler atomic safe
mfd: kempld-core: Fix 'assignment of read-only location' error
mfd: axp20x: Allow the AXP803 to be probed by I2C
mfd: da9063: Add support for latest DA silicon revision
mfd: da9063: Fix revision handling to correctly select reg tables
dt-bindings: mfd: st,stmfx: Remove I2C unit name
dt-bindings: mfd: ti,j721e-system-controller.yaml: Add J721e system controller
mfd: motorola-cpcap: Disable interrupt for suspend
mfd: smsc-ece1099: Remove driver
mfd: core: Add OF_MFD_CELL_REG() helper
...
|
|
Pull networking fixes from David Miller:
"Some merge window fallout, some longer term fixes:
1) Handle headroom properly in lapbether and x25_asy drivers, from
Xie He.
2) Fetch MAC address from correct r8152 device node, from Thierry
Reding.
3) In the sw kTLS path we should allow MSG_CMSG_COMPAT in sendmsg,
from Rouven Czerwinski.
4) Correct fdputs in socket layer, from Miaohe Lin.
5) Revert troublesome sockptr_t optimization, from Christoph Hellwig.
6) Fix TCP TFO key reading on big endian, from Jason Baron.
7) Missing CAP_NET_RAW check in nfc, from Qingyu Li.
8) Fix inet fastreuse optimization with tproxy sockets, from Tim
Froidcoeur.
9) Fix 64-bit divide in new SFC driver, from Edward Cree.
10) Add a tracepoint for prandom_u32 so that we can more easily
perform usage analysis. From Eric Dumazet.
11) Fix rwlock imbalance in AF_PACKET, from John Ogness"
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (49 commits)
net: openvswitch: introduce common code for flushing flows
af_packet: TPACKET_V3: fix fill status rwlock imbalance
random32: add a tracepoint for prandom_u32()
Revert "ipv4: tunnel: fix compilation on ARCH=um"
net: accept an empty mask in /sys/class/net/*/queues/rx-*/rps_cpus
net: ethernet: stmmac: Disable hardware multicast filter
net: stmmac: dwmac1000: provide multicast filter fallback
ipv4: tunnel: fix compilation on ARCH=um
vsock: fix potential null pointer dereference in vsock_poll()
sfc: fix ef100 design-param checking
net: initialize fastreuse on inet_inherit_port
net: refactor bind_bucket fastreuse into helper
net: phy: marvell10g: fix null pointer dereference
net: Fix potential memory leak in proto_register()
net: qcom/emac: add missed clk_disable_unprepare in error path of emac_clks_phase1_init
ionic_lif: Use devm_kcalloc() in ionic_qcq_alloc()
net/nfc/rawsock.c: add CAP_NET_RAW check.
hinic: fix strncpy output truncated compile warnings
drivers/net/wan/x25_asy: Added needed_headroom and a skb->len check
net/tls: Fix kmap usage
...
|
|
Commit 3ce311afb558 ("libperf: Move to tools/lib/perf") moved libperf
out of tools/perf/, but failed to update MAINTAINERS.
Signed-off-by: Rob Herring <robh@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200807193225.3904108-1-robh@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull more clk updates from Stephen Boyd:
"Here's some more updates that missed the last pull request because I
happened to tag the tree at an earlier point in the history of
clk-next. I must have fat fingered it and checked out an older version
of clk-next on this second computer I'm using.
This time it actually includes more code for Qualcomm SoCs, the AT91
major updates, and some Rockchip SoC clk driver updates as well. I've
corrected this flow so this shouldn't happen again"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (83 commits)
clk: bcm2835: Do not use prediv with bcm2711's PLLs
clk: drop unused function __clk_get_flags
clk: hsdk: Fix bad dependency on IOMEM
dt-bindings: clock: Fix YAML schemas for LPASS clocks on SC7180
clk: mmp: avoid missing prototype warning
clk: sparx5: Add Sparx5 SoC DPLL clock driver
dt-bindings: clock: sparx5: Add bindings include file
clk: qoriq: add LS1021A core pll mux options
clk: clk-atlas6: fix return value check in atlas6_clk_init()
clk: tegra: pll: Improve PLLM enable-state detection
clk: X1000: Add support for calculat REFCLK of USB PHY.
clk: JZ4780: Reformat the code to align it.
clk: JZ4780: Add functions for enable and disable USB PHY.
clk: Ingenic: Add RTC related clocks for Ingenic SoCs.
dt-bindings: clock: Add tabs to align code.
dt-bindings: clock: Add RTC related clocks for Ingenic SoCs.
clk: davinci: Use fallthrough pseudo-keyword
clk: imx: Use fallthrough pseudo-keyword
clk: qcom: gcc-sdm660: Fix up gcc_mss_mnoc_bimc_axi_clk
clk: qcom: gcc-sdm660: Add missing modem reset
...
|
|
git://www.linux-watchdog.org/linux-watchdog
Pull watchdog updates from Wim Van Sebroeck:
- f71808e_wdt imporvements
- dw_wdt improvements
- mlx-wdt: support new watchdog type with longer timeout period
- fallthrough pseudo-keyword replacements
- overall small fixes and improvements
* tag 'linux-watchdog-5.9-rc1' of git://www.linux-watchdog.org/linux-watchdog: (35 commits)
watchdog: rti-wdt: balance pm runtime enable calls
watchdog: rti-wdt: attach to running watchdog during probe
watchdog: add support for adjusting last known HW keepalive time
watchdog: use __watchdog_ping in startup
watchdog: softdog: Add options 'soft_reboot_cmd' and 'soft_active_on_boot'
watchdog: pcwd_usb: remove needless check before usb_free_coherent()
watchdog: Replace HTTP links with HTTPS ones
dt-bindings: watchdog: renesas,wdt: Document r8a774e1 support
watchdog: initialize device before misc_register
watchdog: booke_wdt: Add common nowayout parameter driver
watchdog: scx200_wdt: Use fallthrough pseudo-keyword
watchdog: Use fallthrough pseudo-keyword
watchdog: f71808e_wdt: do stricter parameter validation
watchdog: f71808e_wdt: clear watchdog timeout occurred flag
watchdog: f71808e_wdt: remove use of wrong watchdog_info option
watchdog: f71808e_wdt: indicate WDIOF_CARDRESET support in watchdog_info.options
docs: watchdog: codify ident.options as superset of possible status flags
dt-bindings: watchdog: Add compatible for QCS404, SC7180, SDM845, SM8150
dt-bindings: watchdog: Convert QCOM watchdog timer bindings to YAML
watchdog: dw_wdt: Add DebugFS files
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
- Remove of the dev->archdata.iommu (or similar) pointers from most
architectures. Only Sparc is left, but this is private to Sparc as
their drivers don't use the IOMMU-API.
- ARM-SMMU updates from Will Deacon:
- Support for SMMU-500 implementation in Marvell Armada-AP806 SoC
- Support for SMMU-500 implementation in NVIDIA Tegra194 SoC
- DT compatible string updates
- Remove unused IOMMU_SYS_CACHE_ONLY flag
- Move ARM-SMMU drivers into their own subdirectory
- Intel VT-d updates from Lu Baolu:
- Misc tweaks and fixes for vSVA
- Report/response page request events
- Cleanups
- Move the Kconfig and Makefile bits for the AMD and Intel drivers into
their respective subdirectory.
- MT6779 IOMMU Support
- Support for new chipsets in the Renesas IOMMU driver
- Other misc cleanups and fixes (e.g. to improve compile test coverage)
* tag 'iommu-updates-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (77 commits)
iommu/amd: Move Kconfig and Makefile bits down into amd directory
iommu/vt-d: Move Kconfig and Makefile bits down into intel directory
iommu/arm-smmu: Move Arm SMMU drivers into their own subdirectory
iommu/vt-d: Skip TE disabling on quirky gfx dedicated iommu
iommu: Add gfp parameter to io_pgtable_ops->map()
iommu: Mark __iommu_map_sg() as static
iommu/vt-d: Rename intel-pasid.h to pasid.h
iommu/vt-d: Add page response ops support
iommu/vt-d: Report page request faults for guest SVA
iommu/vt-d: Add a helper to get svm and sdev for pasid
iommu/vt-d: Refactor device_to_iommu() helper
iommu/vt-d: Disable multiple GPASID-dev bind
iommu/vt-d: Warn on out-of-range invalidation address
iommu/vt-d: Fix devTLB flush for vSVA
iommu/vt-d: Handle non-page aligned address
iommu/vt-d: Fix PASID devTLB invalidation
iommu/vt-d: Remove global page support in devTLB flush
iommu/vt-d: Enforce PASID devTLB field mask
iommu: Make some functions static
iommu/amd: Remove double zero check
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc
Pull remoteproc updates from Bjorn Andersson:
"This introduces a new "detached" state for remote processors that are
deemed to be running at the time Linux boots and the infrastructure
for "attaching" to these. It then introduces the support for
performing this operation for the STM32 platform.
The coredump functionality is moved out from the core file and gains
support for an optional mode where the recovery phase awaits the
notification from devcoredump that the dump should be released. This
allows userspace to grab the coredump in scenarios where vmalloc space
is too low for creating a complete copy of the coredump before handing
this to devcoredump.
A new character device based interface is introduced to allow tying
the stoppage of a remote processor to the termination of a user space
process. This is useful in situations when such process provides
crucial resources/operations for the firmware running on the remote
processor.
The Texas Instrument K3 driver gains support for the C66x and C71x
DSPs.
Qualcomm remoteprocs gains support for stashing relocation information
in IMEM, to aid post mortem debugging and the crash notification
mechanism is generalized to be reusable in cases where loosely coupled
drivers needs to know about the status of a remote processor. One such
example is the IPA hardware block, which is jointly owned with the
modem and migrated to this improved interface.
It also introduces a number of bug fixes and debug improvements for
the Qualcomm modem remoteproc driver.
And it cleans up the inconsistent interface for remoteproc drivers to
implement power management"
* tag 'rproc-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc: (56 commits)
remoteproc: core: Register the character device interface
remoteproc: Add remoteproc character device interface
remoteproc: kill IPA notify code
net: ipa: new notification infrastructure
remoteproc: k3-dsp: Add support for C71x DSPs
dt-bindings: remoteproc: k3-dsp: Update bindings for C71x DSPs
remoteproc: k3-dsp: Add support for L2RAM loading on C66x DSPs
remoteproc: k3-dsp: Add a remoteproc driver of K3 C66x DSPs
dt-bindings: remoteproc: Add bindings for C66x DSPs on TI K3 SoCs
remoteproc: k3: Add TI-SCI processor control helper functions
remoteproc: Introduce rproc_of_parse_firmware() helper
dt-bindings: arm: keystone: Add common TI SCI bindings
remoteproc: qcom_q6v5_mss: Remove redundant running state
remoteproc: qcom: q6v5: Update running state before requesting stop
remoteproc: qcom_q6v5_mss: Add modem debug policy support
remoteproc: qcom_q6v5_mss: Validate modem blob firmware size before load
remoteproc: qcom_q6v5_mss: Validate MBA firmware size before load
rpmsg: update documentation
remoteproc: qcom_q6v5_mss: Add MBA log extraction support
remoteproc: Add coredump debugfs entry
...
|
|
I'm not doing much work on the NFP driver any more.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI updates from Bjorn Helgaas:
"Enumeration:
- Fix pci_cfg_wait queue locking problem (Bjorn Helgaas)
- Convert PCIe capability PCIBIOS errors to errno (Bolarinwa Olayemi
Saheed)
- Align PCIe capability and PCI accessor return values (Bolarinwa
Olayemi Saheed)
- Fix pci_create_slot() reference count leak (Qiushi Wu)
- Announce device after early fixups (Tiezhu Yang)
PCI device hotplug:
- Make rpadlpar functions static (Wei Yongjun)
Driver binding:
- Add device even if driver attach failed (Rajat Jain)
Virtualization:
- xen: Remove redundant initialization of irq (Colin Ian King)
IOMMU:
- Add pci_pri_supported() to check device or associated PF (Ashok Raj)
- Release IVRS table in AMD ACS quirk (Hanjun Guo)
- Mark AMD Navi10 GPU rev 0x00 ATS as broken (Kai-Heng Feng)
- Treat "external-facing" devices themselves as internal (Rajat Jain)
MSI:
- Forward MSI-X error code in pci_alloc_irq_vectors_affinity() (Piotr
Stankiewicz)
Error handling:
- Clear PCIe Device Status errors only if OS owns AER (Jonathan
Cameron)
- Log correctable errors as warning, not error (Matt Jolly)
- Use 'pci_channel_state_t' instead of 'enum pci_channel_state' (Luc
Van Oostenryck)
Peer-to-peer DMA:
- Allow P2PDMA on AMD Zen and newer CPUs (Logan Gunthorpe)
ASPM:
- Add missing newline in sysfs 'policy' (Xiongfeng Wang)
Native PCIe controllers:
- Convert to devm_platform_ioremap_resource_byname() (Dejin Zheng)
- Convert to devm_platform_ioremap_resource() (Dejin Zheng)
- Remove duplicate error message from devm_pci_remap_cfg_resource()
callers (Dejin Zheng)
- Fix runtime PM imbalance on error (Dinghao Liu)
- Remove dev_err() when handing an error from platform_get_irq()
(Krzysztof Wilczyński)
- Use pci_host_bridge.windows list directly instead of splicing in a
temporary list for cadence, mvebu, host-common (Rob Herring)
- Use pci_host_probe() instead of open-coding all the pieces for
altera, brcmstb, iproc, mobiveil, rcar, rockchip, tegra, v3,
versatile, xgene, xilinx, xilinx-nwl (Rob Herring)
- Default host bridge parent device to the platform device (Rob
Herring)
- Use pci_is_root_bus() instead of tracking root bus number
separately in aardvark, designware (imx6, keystone,
designware-host), mobiveil, xilinx-nwl, xilinx, rockchip, rcar (Rob
Herring)
- Set host bridge bus number in pci_scan_root_bus_bridge() instead of
each driver for aardvark, designware-host, host-common, mediatek,
rcar, tegra, v3-semi (Rob Herring)
- Move DT resource setup into devm_pci_alloc_host_bridge() (Rob
Herring)
- Set bridge map_irq and swizzle_irq to default functions; drivers
that don't support legacy IRQs (iproc) need to undo this (Rob
Herring)
ARM Versatile PCIe controller driver:
- Drop flag PCI_ENABLE_PROC_DOMAINS (Rob Herring)
Cadence PCIe controller driver:
- Use "dma-ranges" instead of "cdns,no-bar-match-nbits" property
(Kishon Vijay Abraham I)
- Remove "mem" from reg binding (Kishon Vijay Abraham I)
- Fix cdns_pcie_{host|ep}_setup() error path (Kishon Vijay Abraham I)
- Convert all r/w accessors to perform only 32-bit accesses (Kishon
Vijay Abraham I)
- Add support to start link and verify link status (Kishon Vijay
Abraham I)
- Allow pci_host_bridge to have custom pci_ops (Kishon Vijay Abraham I)
- Add new *ops* for CPU addr fixup (Kishon Vijay Abraham I)
- Fix updating Vendor ID and Subsystem Vendor ID register (Kishon
Vijay Abraham I)
- Use bridge resources for outbound window setup (Rob Herring)
- Remove private bus number and range storage (Rob Herring)
Cadence PCIe endpoint driver:
- Add MSI-X support (Alan Douglas)
HiSilicon PCIe controller driver:
- Remove non-ECAM HiSilicon hip05/hip06 driver (Rob Herring)
Intel VMD host bridge driver:
- Use Shadow MEMBAR registers for QEMU/KVM guests (Jon Derrick)
Loongson PCIe controller driver:
- Use DECLARE_PCI_FIXUP_EARLY for bridge_class_quirk() (Tiezhu Yang)
Marvell Aardvark PCIe controller driver:
- Indicate error in 'val' when config read fails (Pali Rohár)
- Don't touch PCIe registers if no card connected (Pali Rohár)
Marvell MVEBU PCIe controller driver:
- Setup BAR0 in order to fix MSI (Shmuel Hazan)
Microsoft Hyper-V host bridge driver:
- Fix a timing issue which causes kdump to fail occasionally (Wei Hu)
- Make some functions static (Wei Yongjun)
NVIDIA Tegra PCIe controller driver:
- Revert tegra124 raw_violation_fixup (Nicolas Chauvet)
- Remove PLL power supplies (Thierry Reding)
Qualcomm PCIe controller driver:
- Change duplicate PCI reset to phy reset (Abhishek Sahu)
- Add missing ipq806x clocks in PCIe driver (Ansuel Smith)
- Add missing reset for ipq806x (Ansuel Smith)
- Add ext reset (Ansuel Smith)
- Use bulk clk API and assert on error (Ansuel Smith)
- Add support for tx term offset for rev 2.1.0 (Ansuel Smith)
- Define some PARF params needed for ipq8064 SoC (Ansuel Smith)
- Add ipq8064 rev2 variant (Ansuel Smith)
- Support PCI speed set for ipq806x (Sham Muthayyan)
Renesas R-Car PCIe controller driver:
- Use devm_pci_alloc_host_bridge() (Rob Herring)
- Use struct pci_host_bridge.windows list directly (Rob Herring)
- Convert rcar-gen2 to use modern host bridge probe functions (Rob
Herring)
TI J721E PCIe driver:
- Add TI J721E PCIe host and endpoint driver (Kishon Vijay Abraham I)
Xilinx Versal CPM PCIe controller driver:
- Add Versal CPM Root Port driver and YAML schema (Bharat Kumar
Gogada)
MicroSemi Switchtec management driver:
- Add missing __iomem and __user tags to fix sparse warnings (Logan
Gunthorpe)
Miscellaneous:
- Replace http:// links with https:// (Alexander A. Klimov)
- Replace lkml.org, spinics, gmane with lore.kernel.org (Bjorn
Helgaas)
- Remove unused pci_lost_interrupt() (Heiner Kallweit)
- Move PCI_VENDOR_ID_REDHAT definition to pci_ids.h (Huacai Chen)
- Fix kerneldoc warnings (Krzysztof Kozlowski)"
* tag 'pci-v5.9-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (113 commits)
PCI: Fix kerneldoc warnings
PCI: xilinx-cpm: Add Versal CPM Root Port driver
PCI: xilinx-cpm: Add YAML schemas for Versal CPM Root Port
PCI: Set bridge map_irq and swizzle_irq to default functions
PCI: Move DT resource setup into devm_pci_alloc_host_bridge()
PCI: rcar-gen2: Convert to use modern host bridge probe functions
PCI: Remove dev_err() when handing an error from platform_get_irq()
MAINTAINERS: Add Kishon Vijay Abraham I for TI J721E SoC PCIe
misc: pci_endpoint_test: Add J721E in pci_device_id table
PCI: j721e: Add TI J721E PCIe driver
PCI: switchtec: Add missing __iomem tag to fix sparse warnings
PCI: switchtec: Add missing __iomem and __user tags to fix sparse warnings
PCI: rpadlpar: Make functions static
PCI/P2PDMA: Allow P2PDMA on AMD Zen and newer CPUs
PCI: Release IVRS table in AMD ACS quirk
PCI: Announce device after early fixups
PCI: Mark AMD Navi10 GPU rev 0x00 ATS as broken
PCI: Remove unused pci_lost_interrupt()
dt-bindings: PCI: Add EP mode dt-bindings for TI's J721E SoC
dt-bindings: PCI: Add host mode dt-bindings for TI's J721E SoC
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- Legacy soc_camera driver was removed from staging
- New I2C sensor related drivers: dw9768, ch7322, max9271, rdacm20
- TI vpe driver code was re-organized and had new features added
- Added Xilinx MIPI CSI-2 Rx Subsystem driver
- Added support for Infrared Toy and IR Droid devices
- Lots of random driver fixes, new features and cleanups
* tag 'media/v5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (318 commits)
media: camss: fix memory leaks on error handling paths in probe
media: davinci: vpif_capture: fix potential double free
media: radio: remove redundant assignment to variable retval
media: allegro: fix potential null dereference on header
media: mtk-mdp: Fix a refcounting bug on error in init
media: allegro: fix an error pointer vs NULL check
media: meye: fix missing pm_mchip_mode field
media: cafe-driver: use generic power management
media: saa7164: use generic power management
media: v4l2-dev/ioctl: Fix document for VIDIOC_QUERYCAP
media: v4l2: Correct kernel-doc inconsistency
media: v4l2: Correct kernel-doc inconsistency
media: dvbdev.h: keep * together with the type
media: v4l2-subdev.h: keep * together with the type
media: videobuf2: Print videobuf2 buffer state by name
media: colorspaces-details.rst: fix V4L2_COLORSPACE_JPEG description
media: tw68: use generic power management
media: meye: use generic power management
media: cx88: use generic power management
media: cx25821: use generic power management
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine updates from Vinod Koul:
"Core:
- Support out of order dma completion
- Support for repeating transaction
New controllers:
- Support for Actions S700 DMA engine
- Renesas R8A774E1, r8a7742 controller binding
- New driver for Xilinx DPDMA controller
Other:
- Support of out of order dma completion in idxd driver
- W=1 warning cleanup of subsystem
- Updates to ti-k3-dma, dw, idxd drivers"
* tag 'dmaengine-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (68 commits)
dmaengine: dw: Don't include unneeded header to platform data header
dmaengine: Actions: Add support for S700 DMA engine
dmaengine: Actions: get rid of bit fields from dma descriptor
dt-bindings: dmaengine: convert Actions Semi Owl SoCs bindings to yaml
dmaengine: idxd: add missing invalid flags field to completion
dmaengine: dw: Initialize max_sg_burst capability
dmaengine: dw: Introduce max burst length hw config
dmaengine: dw: Initialize min and max burst DMA device capability
dmaengine: dw: Set DMA device max segment size parameter
dmaengine: dw: Take HC_LLP flag into account for noLLP auto-config
dmaengine: Introduce DMA-device device_caps callback
dmaengine: Introduce max SG burst capability
dmaengine: Introduce min burst length capability
dt-bindings: dma: dw: Add max burst transaction length property
dt-bindings: dma: dw: Convert DW DMAC to DT binding
dmaengine: ti: k3-udma: Query throughput level information from hardware
dmaengine: ti: k3-udma: Use defines for capabilities register parsing
dmaengine: xilinx: dpdma: Fix kerneldoc warning
dmaengine: xilinx: dpdma: add missing kernel doc
dmaengine: xilinx: dpdma: remove comparison of unsigned expression
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- Add support for (optionally) using queued spinlocks & rwlocks.
- Support for a new faster system call ABI using the scv instruction on
Power9 or later.
- Drop support for the PROT_SAO mmap/mprotect flag as it will be
unsupported on Power10 and future processors, leaving us with no way
to implement the functionality it requests. This risks breaking
userspace, though we believe it is unused in practice.
- A bug fix for, and then the removal of, our custom stack expansion
checking. We now allow stack expansion up to the rlimit, like other
architectures.
- Remove the remnants of our (previously disabled) topology update
code, which tried to react to NUMA layout changes on virtualised
systems, but was prone to crashes and other problems.
- Add PMU support for Power10 CPUs.
- A change to our signal trampoline so that we don't unbalance the link
stack (branch return predictor) in the signal delivery path.
- Lots of other cleanups, refactorings, smaller features and so on as
usual.
Thanks to: Abhishek Goel, Alastair D'Silva, Alexander A. Klimov, Alexey
Kardashevskiy, Alistair Popple, Andrew Donnellan, Aneesh Kumar K.V, Anju
T Sudhakar, Anton Blanchard, Arnd Bergmann, Athira Rajeev, Balamuruhan
S, Bharata B Rao, Bill Wendling, Bin Meng, Cédric Le Goater, Chris
Packham, Christophe Leroy, Christoph Hellwig, Daniel Axtens, Dan
Williams, David Lamparter, Desnes A. Nunes do Rosario, Erhard F., Finn
Thain, Frederic Barrat, Ganesh Goudar, Gautham R. Shenoy, Geoff Levand,
Greg Kurz, Gustavo A. R. Silva, Hari Bathini, Harish, Imre Kaloz, Joel
Stanley, Joe Perches, John Crispin, Jordan Niethe, Kajol Jain, Kamalesh
Babulal, Kees Cook, Laurent Dufour, Leonardo Bras, Li RongQing, Madhavan
Srinivasan, Mahesh Salgaonkar, Mark Cave-Ayland, Michal Suchanek, Milton
Miller, Mimi Zohar, Murilo Opsfelder Araujo, Nathan Chancellor, Nathan
Lynch, Naveen N. Rao, Nayna Jain, Nicholas Piggin, Oliver O'Halloran,
Palmer Dabbelt, Pedro Miraglia Franco de Carvalho, Philippe Bergheaud,
Pingfan Liu, Pratik Rajesh Sampat, Qian Cai, Qinglang Miao, Randy
Dunlap, Ravi Bangoria, Sachin Sant, Sam Bobroff, Sandipan Das, Santosh
Sivaraj, Satheesh Rajendran, Shirisha Ganta, Sourabh Jain, Srikar
Dronamraju, Stan Johnson, Stephen Rothwell, Thadeu Lima de Souza
Cascardo, Thiago Jung Bauermann, Tom Lane, Vaibhav Jain, Vladis Dronov,
Wei Yongjun, Wen Xiong, YueHaibing.
* tag 'powerpc-5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (337 commits)
selftests/powerpc: Fix pkey syscall redefinitions
powerpc: Fix circular dependency between percpu.h and mmu.h
powerpc/powernv/sriov: Fix use of uninitialised variable
selftests/powerpc: Skip vmx/vsx/tar/etc tests on older CPUs
powerpc/40x: Fix assembler warning about r0
powerpc/papr_scm: Add support for fetching nvdimm 'fuel-gauge' metric
powerpc/papr_scm: Fetch nvdimm performance stats from PHYP
cpuidle: pseries: Fixup exit latency for CEDE(0)
cpuidle: pseries: Add function to parse extended CEDE records
cpuidle: pseries: Set the latency-hint before entering CEDE
selftests/powerpc: Fix online CPU selection
powerpc/perf: Consolidate perf_callchain_user_[64|32]()
powerpc/pseries/hotplug-cpu: Remove double free in error path
powerpc/pseries/mobility: Add pr_debug() for device tree changes
powerpc/pseries/mobility: Set pr_fmt()
powerpc/cacheinfo: Warn if cache object chain becomes unordered
powerpc/cacheinfo: Improve diagnostics about malformed cache lists
powerpc/cacheinfo: Use name@unit instead of full DT path in debug messages
powerpc/cacheinfo: Set pr_fmt()
powerpc: fix function annotations to avoid section mismatch warnings with gcc-10
...
|
|
Conflicts:
Documentation/driver-api/dmaengine/provider.rst
include/linux/dmaengine.h
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux
Pull thermal updates from Daniel Lezcano:
- Add support to enable/disable the thermal zones resulting on core
code and drivers cleanup (Andrzej Pietrasiewicz)
- Add generic netlink support for userspace notifications: events,
temperature and discovery commands (Daniel Lezcano)
- Fix redundant initialization for a ret variable (Colin Ian King)
- Remove the clock cooling code as it is used nowhere (Amit Kucheria)
- Add the rcar_gen3_thermal's r8a774e1 support (Marian-Cristian
Rotariu)
- Replace all references to thermal.txt in the documentation to the
corresponding yaml files (Amit Kucheria)
- Add maintainer entry for the IPA (Lukasz Luba)
- Add support for MSM8939 for the tsens (Shawn Guo)
- Update power allocator and devfreq cooling to SPDX licensing (Lukasz
Luba)
- Add Cannon Lake Low Power PCH support (Sumeet Pawnikar)
- Add tsensor support for V2 mediatek thermal system (Henry Yen)
- Fix thermal zone lookup by ID for the core code (Thierry Reding)
* tag 'thermal-v5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux: (40 commits)
thermal: intel: intel_pch_thermal: Add Cannon Lake Low Power PCH support
thermal: mediatek: Add tsensor support for V2 thermal system
thermal: mediatek: Prepare to add support for other platforms
thermal: Update power allocator and devfreq cooling to SPDX licensing
MAINTAINERS: update entry to thermal governors file name prefixing
thermal: core: Add thermal zone enable/disable notification
thermal: qcom: tsens-v0_1: Add support for MSM8939
dt-bindings: tsens: qcom: Document MSM8939 compatible
thermal: core: Fix thermal zone lookup by ID
thermal: int340x: processor_thermal: fix: update Jasper Lake PCI id
thermal: imx8mm: Support module autoloading
thermal: ti-soc-thermal: Fix reversed condition in ti_thermal_expose_sensor()
MAINTAINERS: Add maintenance information for IPA
thermal: rcar_gen3_thermal: Do not shadow thcode variable
dt-bindings: thermal: Get rid of thermal.txt and replace references
thermal: core: Move initialization after core initcall
thermal: netlink: Improve the initcall ordering
net: genetlink: Move initialization to core_initcall
thermal: rcar_gen3_thermal: Add r8a774e1 support
thermal/drivers/clock_cooling: Remove clock_cooling code
...
|
|
Pull SCSI updates from James Bottomley:
"This consists of the usual driver updates (ufs, qla2xxx, tcmu, lpfc,
hpsa, zfcp, scsi_debug) and minor bug fixes.
We also have a huge docbook fix update like most other subsystems and
no major update to the core (the few non trivial updates are either
minor fixes or removing an unused feature [scsi_sdb_cache])"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (307 commits)
scsi: scsi_transport_srp: Sanitize scsi_target_block/unblock sequences
scsi: ufs-mediatek: Apply DELAY_AFTER_LPM quirk to Micron devices
scsi: ufs: Introduce device quirk "DELAY_AFTER_LPM"
scsi: virtio-scsi: Correctly handle the case where all LUNs are unplugged
scsi: scsi_debug: Implement tur_ms_to_ready parameter
scsi: scsi_debug: Fix request sense
scsi: lpfc: Fix typo in comment for ULP
scsi: ufs-mediatek: Prevent LPM operation on undeclared VCC
scsi: iscsi: Do not put host in iscsi_set_flashnode_param()
scsi: hpsa: Correct ctrl queue depth
scsi: target: tcmu: Make TMR notification optional
scsi: target: tcmu: Implement tmr_notify callback
scsi: target: tcmu: Fix and simplify timeout handling
scsi: target: tcmu: Factor out new helper ring_insert_padding
scsi: target: tcmu: Do not queue aborted commands
scsi: target: tcmu: Use priv pointer in se_cmd
scsi: target: Add tmr_notify backend function
scsi: target: Modify core_tmr_abort_task()
scsi: target: iscsi: Fix inconsistent debug message
scsi: target: iscsi: Fix login error when receiving
...
|
|
Pull rdma updates from Jason Gunthorpe:
"A quiet cycle after the larger 5.8 effort. Substantially cleanup and
driver work with a few smaller features this time.
- Driver updates for hfi1, rxe, mlx5, hns, qedr, usnic, bnxt_re
- Removal of dead or redundant code across the drivers
- RAW resource tracker dumps to include a device specific data blob
for device objects to aide device debugging
- Further advance the IOCTL interface, remove the ability to turn it
off. Add QUERY_CONTEXT, QUERY_MR, and QUERY_PD commands
- Remove stubs related to devices with no pkey table
- A shared CQ scheme to allow multiple ULPs to share the CQ rings of
a device to give higher performance
- Several more static checker, syzkaller and rare crashers fixed"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (121 commits)
RDMA/mlx5: Fix flow destination setting for RDMA TX flow table
RDMA/rxe: Remove pkey table
RDMA/umem: Add a schedule point in ib_umem_get()
RDMA/hns: Fix the unneeded process when getting a general type of CQE error
RDMA/hns: Fix error during modify qp RTS2RTS
RDMA/hns: Delete unnecessary memset when allocating VF resource
RDMA/hns: Remove redundant parameters in set_rc_wqe()
RDMA/hns: Remove support for HIP08_A
RDMA/hns: Refactor hns_roce_v2_set_hem()
RDMA/hns: Remove redundant hardware opcode definitions
RDMA/netlink: Remove CAP_NET_RAW check when dump a raw QP
RDMA/include: Replace license text with SPDX tags
RDMA/rtrs: remove WQ_MEM_RECLAIM for rtrs_wq
RDMA/rtrs-clt: add an additional random 8 seconds before reconnecting
RDMA/cma: Execute rdma_cm destruction from a handler properly
RDMA/cma: Remove unneeded locking for req paths
RDMA/cma: Using the standard locking pattern when delivering the removal event
RDMA/cma: Simplify DEVICE_REMOVAL for internal_id
RDMA/efa: Add EFA 0xefa1 PCI ID
RDMA/efa: User/kernel compatibility handshake mechanism
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial updates from Greg KH:
"Here is the large set of TTY and Serial driver patches for 5.9-rc1.
Lots of bugfixes in here, thanks to syzbot fuzzing for serial and vt
and console code.
Other highlights include:
- much needed vt/vc code cleanup from Jiri Slaby
- 8250 driver fixes and additions
- various serial driver updates and feature enhancements
- locking cleanup for serial/console initializations
- other minor cleanups
All of these have been in linux-next with no reported issues"
* tag 'tty-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (90 commits)
MAINTAINERS: enlist Greg formally for console stuff
vgacon: Fix for missing check in scrollback handling
Revert "serial: 8250: Let serial core initialise spin lock"
serial: 8250: Let serial core initialise spin lock
tty: keyboard, do not speculate on func_table index
serial: stm32: Add RS485 RTS GPIO control
serial: 8250_dw: Fix common clocks usage race condition
serial: 8250_dw: Pass the same rate to the clk round and set rate methods
serial: 8250_dw: Simplify the ref clock rate setting procedure
serial: 8250: Add 8250 port clock update method
tty: serial: imx: add imx earlycon driver
tty: serial: imx: enable imx serial console port as module
tty/synclink: remove leftover bits of non-PCI card support
tty: Use the preferred form for passing the size of a structure type
tty: Fix identation issues in struct serial_struct32
tty: Avoid the use of one-element arrays
serial: msm_serial: add sparse context annotation
serial: pmac_zilog: add sparse context annotation
newport_con: vc_color is now in state
serial: imx: use hrtimers for rs485 delays
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging/IIO driver updates from Greg KH:
"Here is the large set of Staging and IIO driver patches for 5.9-rc1.
Lots of churn here, but overall the size increase in lines added is
small, while adding a load of new IIO drivers.
Major things in here:
- lots and lots of IIO new drivers and frameworks added
- IIO driver fixes and updates
- lots of tiny coding style cleanups for staging drivers
- vc04_services major reworks and cleanups
We had 3 set of drivers move out of staging in this round as well:
- wilc1000 wireless driver moved out of staging
- speakup moved out of staging
- most USB driver moved out of staging
Full details are in the shortlog.
All of these have been in linux-next with no reported issues. The last
few changes here were to resolve reported linux-next issues, and they
seem to have resolved the problems"
* tag 'staging-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (428 commits)
staging: most: fix up movement of USB driver
staging: rts5208: clear alignment style issues
staging: r8188eu: replace rtw_netdev_priv define with inline function
staging: netlogic: clear alignment style issues
staging: android: ashmem: Fix lockdep warning for write operation
drivers: most: add USB adapter driver
staging: most: Use %pM format specifier for MAC addresses
staging: ks7010: Use %pM format specifier for MAC addresses
staging: qlge: qlge_dbg: removed comment repition
staging: wfx: Use flex_array_size() helper in memcpy()
staging: rtl8723bs: Align macro definitions
staging: rtl8723bs: Clean up function declations
staging: rtl8723bs: Fix coding style errors
drivers: staging: audio: Fix the missing header file for helper file
staging: greybus: audio: Enable GB codec, audio module compilation.
staging: greybus: audio: Add helper APIs for dynamic audio modules
staging: greybus: audio: Resolve compilation error in topology parser
staging: greybus: audio: Resolve compilation errors for GB codec module
staging: greybus: audio: Maintain jack list within GB Audio module
staging: greybus: audio: Update snd_jack FW usage as per new APIs
...
|
|
Pull MIPS upates from Thomas Bogendoerfer:
- improvements for Loongson64
- extended ingenic support
- removal of not maintained paravirt system type
- cleanups and fixes
* tag 'mips_5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (81 commits)
MIPS: SGI-IP27: always enable NUMA in Kconfig
MAINTAINERS: Update KVM/MIPS maintainers
MIPS: Update default config file for Loongson-3
MIPS: KVM: Add kvm guest support for Loongson-3
dt-bindings: mips: Document Loongson kvm guest board
MIPS: handle Loongson-specific GSExc exception
MIPS: add definitions for Loongson-specific CP0.Diag1 register
MIPS: only register FTLBPar exception handler for supported models
MIPS: ingenic: Hardcode mem size for qi,lb60 board
MIPS: DTS: ingenic/qi,lb60: Add model and memory node
MIPS: ingenic: Use fw_passed_dtb even if CONFIG_BUILTIN_DTB
MIPS: head.S: Init fw_passed_dtb to builtin DTB
of: address: Fix parser address/size cells initialization
of_address: Guard of_bus_pci_get_flags with CONFIG_PCI
MIPS: DTS: Fix number of msi vectors for Loongson64G
MIPS: Loongson64: Add ISA node for LS7A PCH
MIPS: Loongson64: DTS: Fix ISA and PCI I/O ranges for RS780E PCH
MIPS: Loongson64: Enlarge IO_SPACE_LIMIT
MIPS: Loongson64: Process ISA Node in DeviceTree
of_address: Add bus type match for pci ranges parser
...
|
|
Pull networking updates from David Miller:
1) Support 6Ghz band in ath11k driver, from Rajkumar Manoharan.
2) Support UDP segmentation in code TSO code, from Eric Dumazet.
3) Allow flashing different flash images in cxgb4 driver, from Vishal
Kulkarni.
4) Add drop frames counter and flow status to tc flower offloading,
from Po Liu.
5) Support n-tuple filters in cxgb4, from Vishal Kulkarni.
6) Various new indirect call avoidance, from Eric Dumazet and Brian
Vazquez.
7) Fix BPF verifier failures on 32-bit pointer arithmetic, from
Yonghong Song.
8) Support querying and setting hardware address of a port function via
devlink, use this in mlx5, from Parav Pandit.
9) Support hw ipsec offload on bonding slaves, from Jarod Wilson.
10) Switch qca8k driver over to phylink, from Jonathan McDowell.
11) In bpftool, show list of processes holding BPF FD references to
maps, programs, links, and btf objects. From Andrii Nakryiko.
12) Several conversions over to generic power management, from Vaibhav
Gupta.
13) Add support for SO_KEEPALIVE et al. to bpf_setsockopt(), from Dmitry
Yakunin.
14) Various https url conversions, from Alexander A. Klimov.
15) Timestamping and PHC support for mscc PHY driver, from Antoine
Tenart.
16) Support bpf iterating over tcp and udp sockets, from Yonghong Song.
17) Support 5GBASE-T i40e NICs, from Aleksandr Loktionov.
18) Add kTLS RX HW offload support to mlx5e, from Tariq Toukan.
19) Fix the ->ndo_start_xmit() return type to be netdev_tx_t in several
drivers. From Luc Van Oostenryck.
20) XDP support for xen-netfront, from Denis Kirjanov.
21) Support receive buffer autotuning in MPTCP, from Florian Westphal.
22) Support EF100 chip in sfc driver, from Edward Cree.
23) Add XDP support to mvpp2 driver, from Matteo Croce.
24) Support MPTCP in sock_diag, from Paolo Abeni.
25) Commonize UDP tunnel offloading code by creating udp_tunnel_nic
infrastructure, from Jakub Kicinski.
26) Several pci_ --> dma_ API conversions, from Christophe JAILLET.
27) Add FLOW_ACTION_POLICE support to mlxsw, from Ido Schimmel.
28) Add SK_LOOKUP bpf program type, from Jakub Sitnicki.
29) Refactor a lot of networking socket option handling code in order to
avoid set_fs() calls, from Christoph Hellwig.
30) Add rfc4884 support to icmp code, from Willem de Bruijn.
31) Support TBF offload in dpaa2-eth driver, from Ioana Ciornei.
32) Support XDP_REDIRECT in qede driver, from Alexander Lobakin.
33) Support PCI relaxed ordering in mlx5 driver, from Aya Levin.
34) Support TCP syncookies in MPTCP, from Flowian Westphal.
35) Fix several tricky cases of PMTU handling wrt. briding, from Stefano
Brivio.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2056 commits)
net: thunderx: initialize VF's mailbox mutex before first usage
usb: hso: remove bogus check for EINPROGRESS
usb: hso: no complaint about kmalloc failure
hso: fix bailout in error case of probe
ip_tunnel_core: Fix build for archs without _HAVE_ARCH_IPV6_CSUM
selftests/net: relax cpu affinity requirement in msg_zerocopy test
mptcp: be careful on subflow creation
selftests: rtnetlink: make kci_test_encap() return sub-test result
selftests: rtnetlink: correct the final return value for the test
net: dsa: sja1105: use detected device id instead of DT one on mismatch
tipc: set ub->ifindex for local ipv6 address
ipv6: add ipv6_dev_find()
net: openvswitch: silence suspicious RCU usage warning
Revert "vxlan: fix tos value before xmit"
ptp: only allow phase values lower than 1 period
farsync: switch from 'pci_' to 'dma_' API
wan: wanxl: switch from 'pci_' to 'dma_' API
hv_netvsc: do not use VF device if link is down
dpaa2-eth: Fix passing zero to 'PTR_ERR' warning
net: macb: Properly handle phylink on at91sam9x
...
|
|
Pull drm updates from Dave Airlie:
"New xilinx displayport driver, AMD support for two new GPUs (more
header files), i915 initial support for RocketLake and some work on
their DG1 (discrete chip).
The core also grew some lockdep annotations to try and constrain what
drivers do with dma-fences, and added some documentation on why the
idea of indefinite fences doesn't work.
The long list is below.
I do have some fixes trees outstanding, but I'll follow up with those
later.
core:
- add user def flag to cmd line modes
- dma_fence_wait added might_sleep
- dma-fence lockdep annotations
- indefinite fences are bad documentation
- gem CMA functions used in more drivers
- struct mutex removal
- more drm_ debug macro usage
- set/drop master api fixes
- fix for drm/mm hole size comparison
- drm/mm remove invalid entry optimization
- optimise drm/mm hole handling
- VRR debugfs added
- uncompressed AFBC modifier support
- multiple display id blocks in EDID
- multiple driver sg handling fixes
- __drm_atomic_helper_crtc_reset in all drivers
- managed vram helpers
ttm:
- ttm_mem_reg handling cleanup
- remove bo offset field
- drop CMA memtype flag
- drop mappable flag
xilinx:
- New Xilinx ZynqMP DisplayPort Subsystem driver
nouveau:
- add CRC support
- start using NVIDIA published class header files
- convert all push buffer emission to new macros
- Proper push buffer space management for EVO/NVD channels.
- firmware loading fixes
- 2MiB system memory pages support on Pascal and newer
vkms:
- larger cursor support
i915:
- Rocketlake platform enablement
- Early DG1 enablement
- Numerous GEM refactorings
- DP MST fixes
- FBC, PSR, Cursor, Color, Gamma fixes
- TGL, RKL, EHL workaround updates
- TGL 8K display support fixes
- SDVO/HDMI/DVI fixes
amdgpu:
- Initial support for Sienna Cichlid GPU
- Initial support for Navy Flounder GPU
- SI UVD/VCE support
- expose rotation property
- Add support for unique id on Arcturus
- Enable runtime PM on vega10 boards that support BACO
- Skip BAR resizing if the bios already did id
- Major swSMU code cleanup
- Fixes for DCN bandwidth calculations
amdkfd:
- Track SDMA usage per process
- SMI events interface
radeon:
- Default to on chip GART for AGP boards on all arches
- Runtime PM reference count fixes
msm:
- headers regenerated causing churn
- a650/a640 display and GPU enablement
- dpu dither support for 6bpc panels
- dpu cursor fix
- dsi/mdp5 enablement for sdm630/sdm636/sdm66
tegra:
- video capture prep support
- reflection support
mediatek:
- convert mtk_dsi to bridge API
meson:
- FBC support
sun4i:
- iommu support
rockchip:
- register locking fix
- per-pixel alpha support PX30 VOP
mgag200:
- ported to simple and shmem helpers
- device init cleanups
- use managed pci functions
- dropped hw cursor support
ast:
- use managed pci functions
- use managed VRAM helpers
- rework cursor support
malidp:
- dev_groups support
hibmc:
- refactor hibmc_drv_vdac:
vc4:
- create TXP CRTC
imx:
- error path fixes and cleanups
etnaviv:
- clock handling and error handling cleanups
- use pin_user_pages"
* tag 'drm-next-2020-08-06' of git://anongit.freedesktop.org/drm/drm: (1747 commits)
drm/msm: use kthread_create_worker instead of kthread_run
drm/msm/mdp5: Add MDP5 configuration for SDM636/660
drm/msm/dsi: Add DSI configuration for SDM660
drm/msm/mdp5: Add MDP5 configuration for SDM630
drm/msm/dsi: Add phy configuration for SDM630/636/660
drm/msm/a6xx: add A640/A650 hwcg
drm/msm/a6xx: hwcg tables in gpulist
drm/msm/dpu: add SM8250 to hw catalog
drm/msm/dpu: add SM8150 to hw catalog
drm/msm/dpu: intf timing path for displayport
drm/msm/dpu: set missing flush bits for INTF_2 and INTF_3
drm/msm/dpu: don't use INTF_INPUT_CTRL feature on sdm845
drm/msm/dpu: move some sspp caps to dpu_caps
drm/msm/dpu: update UBWC config for sm8150 and sm8250
drm/msm/dpu: use right setup_blend_config for sm8150 and sm8250
drm/msm/a6xx: set ubwc config for A640 and A650
drm/msm/adreno: un-open-code some packets
drm/msm: sync generated headers
drm/msm/a6xx: add build_bw_table for A640/A650
drm/msm/a6xx: fix crashstate capture for A650
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds
Pull LED updates from Pavel Machek:
"Okay, so... this one is interesting. RGB LEDs are very common, and we
need to have some kind of support for them. Multicolor is for
arbitrary set of LEDs in one package, RGB is for LEDs that can produce
full range of colors. We do not have real multicolor LED that is not
RGB in the pipeline, so that one is disabled for now.
You can expect this saga to continue with next pull requests"
* tag 'leds-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds: (37 commits)
MAINTAINERS: Remove myself as LED subsystem maintainer
leds: disallow /sys/class/leds/*:multi:* for now
leds: add RGB color option, as that is different from multicolor.
Make LEDS_LP55XX_COMMON depend on I2C to fix build errors:
Documentation: ABI: leds-turris-omnia: document sysfs attribute
leds: initial support for Turris Omnia LEDs
dt-bindings: leds: add cznic,turris-omnia-leds binding
leds: pattern trigger -- check pattern for validity
leds: Replace HTTP links with HTTPS ones
leds: trigger: add support for LED-private device triggers
leds: lp5521: Add multicolor framework multicolor brightness support
leds: lp5523: Update the lp5523 code to add multicolor brightness function
leds: lp55xx: Add multicolor framework support to lp55xx
leds: lp55xx: Convert LED class registration to devm_*
dt-bindings: leds: Convert leds-lp55xx to yaml
leds: multicolor: Introduce a multicolor class definition
leds: Add multicolor ID to the color ID list
dt: bindings: Add multicolor class dt bindings documention
leds: lp5523: Fix various formatting issues in the code
leds: lp55xx: Fix file permissions to use DEVICE_ATTR macros
...
|
|
It don't have enough time for reviewing patches and thus don't
want to be listed as regular LED maintainer. Nonetheless I may still
give a review from time to time.
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
|
|
Pull MMC updates from Ulf Hansson:
"MMC core:
- Add a new host cap bit and a corresponding DT property, to support
power cycling of the card by FW at system suspend/resume.
- Fix clock rate setting for SDIO in SDR12/SDR25 speed-mode
- Fix switch to 1/4-bit mode at system suspend/resume for SD-combo
cards
- Convert the mmc-pwrseq DT bindings to the json-schema
- Always allow the card detect uevent to be consumed by userspace
MMC host controllers:
- Convert a few DT bindings to the json-schema
- mtk-sd:
- Add support for command queue through cqhci
- Add support for the MT6779 variant
- renesas_sdhi_internal_dmac:
- Fix dma unmapping in the error path
- sdhci_am654:
- Add support for the AM65x PG2.0 variant
- Extend support for phys/clocks
- sdhci-cadence:
- Drop incorrect HW tuning for SD mode
- sdhci-msm:
- Add support for interconnect bandwidth scaling
- Enable internal voltage control
- Enable low power state for pinctrls
- sdhci-of-at91:
- Ludovic Desroches handovers maintenance to Eugen Hristev
- sdhci-pci-gli:
- Improve clock handling for GL975x
- sdhci-pci-o2micro:
- Add HW tuning for SDR104 mode
- Fix support for O2 host controller Seabird1"
* tag 'mmc-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (66 commits)
mmc: mediatek: make function msdc_cqe_disable() static
MAINTAINERS: mmc: sdhci-of-at91: handover maintenance to Eugen Hristev
dt-bindings: mmc: mediatek: Add document for mt6779
mmc: mediatek: command queue support
mmc: mediatek: refine msdc timeout api
mmc: mediatek: add MT6779 MMC driver support
mmc: sdhci-pci-o2micro: Add HW tuning for SDR104 mode
mmc: sdhci-pci-o2micro: Bug fix for O2 host controller Seabird1
mmc: via-sdmmc: use generic power management
memstick: jmb38x_ms: use generic power management
mmc: sdhci-cadence: do not use hardware tuning for SD mode
mmc: sdhci-pci-gli: Set SDR104's clock to 205MHz and enable SSC for GL975x
mmc: cqhci: Fix a print format for the task descriptor
mmc: sdhci-of-arasan: fix timings allocation code
mmc: sdhci: Fix a potential uninitialized variable
dt-bindings: mmc: renesas,sdhi: convert to YAML
dt-bindings: mmc: convert arasan sdhci bindings to yaml
mmc: sdhci: Fix potential null pointer access while accessing vqmmc
mmc: core: Add MMC_CAP2_FULL_PWR_CYCLE_IN_SUSPEND
dt-bindings: mmc: Add full-pwr-cycle-in-suspend property
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon updates from Guenter Roeck:
"Highlights:
- New driver for Sparx5 SoC temperature sensot
- New driver for Corsair Commander Pro
- MAX20710 support added to max20730 driver
Enhancements:
- max6697: Allow max6581 to create tempX_offset attributes
- gsc (Gateworks System Controller): add 16bit pre-scaled voltage mode
- adm1275: Enable adm1278 ADM1278_TEMP1_EN
- dell-smm: Add Latitude 5480 to fan control whitelist
Fixes:
- adc128d818: Fix advanced configuration register init
- pmbus/core: Use s64 instead of long for calculations to fix
overflow issues with 32-bit architectures
Plus various cleanups in several drivers"
* tag 'hwmon-for-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (32 commits)
hwmon: (adc128d818) Fix advanced configuration register init
hwmon: (axi-fan-control) remove duplicate macros
hwmon: (i5k_amb, vt8231) Drop uses of pci_read_config_*() return value
hwmon: (sparx5) Make symbol 's5_temp_match' static
hwmon: (corsair-cpro) add reading pwm values
hwmon: sparx5: Add Sparx5 SoC temperature driver
dt-bindings: hwmon: Add Sparx5 temperature sensor
hwmon: (tmp401) Replace HTTP links with HTTPS ones
hwmon: (lm95234) Replace HTTP links with HTTPS ones
hwmon: (lm90) Replace HTTP links with HTTPS ones
hwmon: (k8temp) Replace HTTP links with HTTPS ones
hwmon: (jc42) Replace HTTP links with HTTPS ones
hwmon: (ina2xx) Replace HTTP links with HTTPS ones
hwmon: (ina209) Replace HTTP links with HTTPS ones
hwmon: Replace HTTP links with HTTPS ones
docs: hwmon: Replace HTTP links with HTTPS ones
hwmon: (adm1025) Replace HTTP links with HTTPS ones
hwmon: add Corsair Commander Pro driver
hwmon: (max6697) Allow max6581 to create tempX_offset
hwmon: (tmmp513) Replace HTTP links with HTTPS links
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull Devicetree updates from Rob Herring:
- Improve device links cycle detection and breaking. Add more bindings
for device link dependencies.
- Refactor parsing 'no-map' in __reserved_mem_alloc_size()
- Improve DT unittest 'ranges' and 'dma-ranges' test case to check
differing cell sizes
- Various http to https link conversions
- Add a schema check to prevent 'syscon' from being used by itself
without a more specific compatible
- A bunch more DT binding conversions to schema
* tag 'devicetree-for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (55 commits)
of: reserved-memory: remove duplicated call to of_get_flat_dt_prop() for no-map node
of: unittest: Use bigger address cells to catch parser regressions
dt-bindings: memory-controllers: Convert mmdc to json-schema
dt-bindings: mtd: Convert imx nand to json-schema
dt-bindings: mtd: Convert gpmi nand to json-schema
dt-bindings: iio: io-channel-mux: Fix compatible string in example code
of: property: Add device link support for pinctrl-0 through pinctrl-8
of: property: Add device link support for multiple DT bindings
dt-bindings: phy: ti: phy-gmii-sel: convert bindings to json-schema
dt-bindings: mux: mux.h: drop a duplicated word
dt-bindings: misc: Convert olpc,xo1.75-ec to json-schema
dt-bindings: aspeed-lpc: Replace HTTP links with HTTPS ones
dt-bindings: drm/bridge: Replace HTTP links with HTTPS ones
drm/tilcdc: Replace HTTP links with HTTPS ones
dt-bindings: iommu: renesas,ipmmu-vmsa: Add r8a774e1 support
dt-bindings: fpga: Replace HTTP links with HTTPS ones
dt-bindings: virtio: Replace HTTP links with HTTPS ones
dt-bindings: media: imx274: Add optional input clock and supplies
dt-bindings: i2c-gpio: Use 'deprecated' keyword on deprecated properties
dt-bindings: interrupt-controller: Fix typos in loongson,liointc.yaml
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB/Thunderbolt updates from Greg KH:
"Here is the large set of USB and Thunderbolt patches for 5.9-rc1.
Nothing really magic/major in here, just lots of little changes and
updates:
- clean up language usages in USB core and some drivers
- Thunderbolt driver updates and additions
- USB Gadget driver updates
- dwc3 driver updates (like always...)
- build with "W=1" warning fixups
- mtu3 driver updates
- usb-serial driver updates and device ids
- typec additions and updates for new hardware
- xhci debug code updates for future platforms
- cdns3 driver updates
- lots of other minor driver updates and fixes and cleanups
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (330 commits)
usb: common: usb-conn-gpio: Register charger
usb: mtu3: simplify mtu3_req_complete()
usb: mtu3: clear dual mode of u3port when disable device
usb: mtu3: use MTU3_EP_WEDGE flag
usb: mtu3: remove useless member @busy in mtu3_ep struct
usb: mtu3: remove repeated error log
usb: mtu3: add ->udc_set_speed()
usb: mtu3: introduce a funtion to check maximum speed
usb: mtu3: clear interrupts status when disable interrupts
usb: mtu3: reinitialize CSR registers
usb: mtu3: fix macro for maximum number of packets
usb: mtu3: remove unnecessary pointer checks
usb: xhci: Fix ASMedia ASM1142 DMA addressing
usb: xhci: define IDs for various ASMedia host controllers
usb: musb: convert to devm_platform_ioremap_resource_byname
usb: gadget: tegra-xudc: convert to devm_platform_ioremap_resource_byname
usb: gadget: r8a66597: convert to devm_platform_ioremap_resource_byname
usb: dwc3: convert to devm_platform_ioremap_resource_byname
usb: cdns3: convert to devm_platform_ioremap_resource_byname
usb: phy: am335x: convert to devm_platform_ioremap_resource_byname
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver updates from Greg KH:
"Here is the large set of char and misc and other driver subsystem
patches for 5.9-rc1. Lots of new driver submissions in here, and
cleanups and features for existing drivers.
Highlights are:
- habanalabs driver updates
- coresight driver updates
- nvmem driver updates
- huge number of "W=1" build warning cleanups from Lee Jones
- dyndbg updates
- virtbox driver fixes and updates
- soundwire driver updates
- mei driver updates
- phy driver updates
- fpga driver updates
- lots of smaller individual misc/char driver cleanups and fixes
Full details are in the shortlog.
All of these have been in linux-next with no reported issues"
* tag 'char-misc-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (322 commits)
habanalabs: remove unused but set variable 'ctx_asid'
nvmem: qcom-spmi-sdam: Enable multiple devices
dt-bindings: nvmem: SID: add binding for A100's SID controller
nvmem: update Kconfig description
nvmem: qfprom: Add fuse blowing support
dt-bindings: nvmem: Add properties needed for blowing fuses
dt-bindings: nvmem: qfprom: Convert to yaml
nvmem: qfprom: use NVMEM_DEVID_AUTO for multiple instances
nvmem: core: add support to auto devid
nvmem: core: Add nvmem_cell_read_u8()
nvmem: core: Grammar fixes for help text
nvmem: sc27xx: add sc2730 efuse support
nvmem: Enforce nvmem stride in the sysfs interface
MAINTAINERS: Add git tree for NVMEM FRAMEWORK
nvmem: sprd: Fix return value of sprd_efuse_probe()
drivers: android: Fix the SPDX comment style
drivers: android: Fix a variable declaration coding style issue
drivers: android: Remove braces for a single statement if-else block
drivers: android: Remove the use of else after return
drivers: android: Fix a variable declaration coding style issue
...
|
|
syzbot has revealed that the "phylink" keyword exists in non-phylink
related contexts in the bluetooth stack. To avoid receiving
inappropriate notifications, change the keyword matching regexp to
something which avoids this, while still allowing changes to networking
drivers that make use of phylink to be detected.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Commit 5c24a28b4eb8 ("dt-bindings: watchdog: Add ARM smc wdt for mt8173
watchdog") added the new ARM SMC WATCHDOG DRIVER entry in MAINTAINERS, but
slipped in a minor mistake.
Luckily, ./scripts/get_maintainer.pl --self-test=patterns complains:
warning: no file matches F: devicetree/bindings/watchdog/arm-smc-wdt.yaml
Update file entry to intended file location.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Evan Benn <evanbenn@chromium.org>
Link: https://lore.kernel.org/r/20200602052104.7795-1-lukas.bulwahn@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
As Eugen handles the software for bootloaders and new products, handover
the maintenance to him.
Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Acked-by: Eugen Hristev <eugen.hristev@microchip.com>
Link: https://lore.kernel.org/r/20200709085331.8145-1-ludovic.desroches@microchip.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Pull documentation updates from Jonathan Corbet:
"It's been a busy cycle for documentation - hopefully the busiest for a
while to come. Changes include:
- Some new Chinese translations
- Progress on the battle against double words words and non-HTTPS
URLs
- Some block-mq documentation
- More RST conversions from Mauro. At this point, that task is
essentially complete, so we shouldn't see this kind of churn again
for a while. Unless we decide to switch to asciidoc or
something...:)
- Lots of typo fixes, warning fixes, and more"
* tag 'docs-5.9' of git://git.lwn.net/linux: (195 commits)
scripts/kernel-doc: optionally treat warnings as errors
docs: ia64: correct typo
mailmap: add entry for <alobakin@marvell.com>
doc/zh_CN: add cpu-load Chinese version
Documentation/admin-guide: tainted-kernels: fix spelling mistake
MAINTAINERS: adjust kprobes.rst entry to new location
devices.txt: document rfkill allocation
PCI: correct flag name
docs: filesystems: vfs: correct flag name
docs: filesystems: vfs: correct sync_mode flag names
docs: path-lookup: markup fixes for emphasis
docs: path-lookup: more markup fixes
docs: path-lookup: fix HTML entity mojibake
CREDITS: Replace HTTP links with HTTPS ones
docs: process: Add an example for creating a fixes tag
doc/zh_CN: add Chinese translation prefer section
doc/zh_CN: add clearing-warn-once Chinese version
doc/zh_CN: add admin-guide index
doc:it_IT: process: coding-style.rst: Correct __maybe_unused compiler label
futex: MAINTAINERS: Re-add selftests directory
...
|
|
I did a few greps for main console data structures, and there's a few
places outside of drivers/video/console:
- a braille driver
- a sisusbvga driver
- fbcon, but I think that's fine if we leave that officially under
fbdev maintainership
- lots of stuff in drivers/tty/vt, which is already under Greg's
maintainership.
So I think this match gives reasonably useful Cc: lists for the files
and places I've tested.
Cc: dri-devel@lists.freedesktop.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://lore.kernel.org/r/20200803141142.1606661-1-daniel.vetter@ffwll.ch
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
James Hogan has become inactive for a long time and leaves KVM for MIPS
orphan. I'm working on KVM/Loongson and attempt to make it upstream both
in kernel and QEMU, while Aleksandar Markovic is already a maintainer of
QEMU/MIPS. We are both interested in QEMU/KVM/MIPS, and we have already
made some contributions in kernel and QEMU. If possible, we want to take
the KVM/MIPS maintainership.
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com>
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"The most significant change here is the extension of the Energy Model
to cover non-CPU devices (as well as CPUs) from Lukasz Luba.
There is also some new hardware support (Ice Lake server idle states
table for intel_idle, Sapphire Rapids and Power Limit 4 support in the
RAPL driver), some new functionality in the existing drivers (eg. a
new switch to disable/enable CPU energy-efficiency optimizations in
intel_pstate, delayed timers in devfreq), some assorted fixes (cpufreq
core, intel_pstate, intel_idle) and cleanups (eg. cpuidle-psci,
devfreq), including the elimination of W=1 build warnings from cpufreq
done by Lee Jones.
Specifics:
- Make the Energy Model cover non-CPU devices (Lukasz Luba).
- Add Ice Lake server idle states table to the intel_idle driver and
eliminate a redundant static variable from it (Chen Yu, Rafael
Wysocki).
- Eliminate all W=1 build warnings from cpufreq (Lee Jones).
- Add support for Sapphire Rapids and for Power Limit 4 to the Intel
RAPL power capping driver (Sumeet Pawnikar, Zhang Rui).
- Fix function name in kerneldoc comments in the idle_inject power
capping driver (Yangtao Li).
- Fix locking issues with cpufreq governors and drop a redundant
"weak" function definition from cpufreq (Viresh Kumar).
- Rearrange cpufreq to register non-modular governors at the
core_initcall level and allow the default cpufreq governor to be
specified in the kernel command line (Quentin Perret).
- Extend, fix and clean up the intel_pstate driver (Srinivas
Pandruvada, Rafael Wysocki):
* Add a new sysfs attribute for disabling/enabling CPU
energy-efficiency optimizations in the processor.
* Make the driver avoid enabling HWP if EPP is not supported.
* Allow the driver to handle numeric EPP values in the sysfs
interface and fix the setting of EPP via sysfs in the active
mode.
* Eliminate a static checker warning and clean up a kerneldoc
comment.
- Clean up some variable declarations in the powernv cpufreq driver
(Wei Yongjun).
- Fix up the ->enter_s2idle callback definition to cover the case
when it points to the same function as ->idle correctly (Neal Liu).
- Rearrange and clean up the PSCI cpuidle driver (Ulf Hansson).
- Make the PM core emit "changed" uevent when adding/removing the
"wakeup" sysfs attribute of devices (Abhishek Pandit-Subedi).
- Add a helper macro for declaring PM callbacks and use it in the MMC
jz4740 driver (Paul Cercueil).
- Fix white space in some places in the hibernate code and make the
system-wide PM code use "const char *" where appropriate (Xiang
Chen, Alexey Dobriyan).
- Add one more "unsafe" helper macro to the freezer to cover the NFS
use case (He Zhe).
- Change the language in the generic PM domains framework to use
parent/child terminology and clean up a typo and some comment
fromatting in that code (Kees Cook, Geert Uytterhoeven).
- Update the operating performance points OPP framework (Lukasz Luba,
Andrew-sh.Cheng, Valdis Kletnieks):
* Refactor dev_pm_opp_of_register_em() and update related drivers.
* Add a missing function export.
* Allow disabled OPPs in dev_pm_opp_get_freq().
- Update devfreq core and drivers (Chanwoo Choi, Lukasz Luba, Enric
Balletbo i Serra, Dmitry Osipenko, Kieran Bingham, Marc Zyngier):
* Add support for delayed timers to the devfreq core and make the
Samsung exynos5422-dmc driver use it.
* Unify sysfs interface to use "df-" as a prefix in instance
names consistently.
* Fix devfreq_summary debugfs node indentation.
* Add the rockchip,pmu phandle to the rk3399_dmc driver DT
bindings.
* List Dmitry Osipenko as the Tegra devfreq driver maintainer.
* Fix typos in the core devfreq code.
- Update the pm-graph utility to version 5.7 including a number of
fixes related to suspend-to-idle (Todd Brandt).
- Fix coccicheck errors and warnings in the cpupower utility (Shuah
Khan).
- Replace HTTP links with HTTPs ones in multiple places (Alexander A.
Klimov)"
* tag 'pm-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (71 commits)
cpuidle: ACPI: fix 'return' with no value build warning
cpufreq: intel_pstate: Fix EPP setting via sysfs in active mode
cpufreq: intel_pstate: Rearrange the storing of new EPP values
intel_idle: Customize IceLake server support
PM / devfreq: Fix the wrong end with semicolon
PM / devfreq: Fix indentaion of devfreq_summary debugfs node
PM / devfreq: Clean up the devfreq instance name in sysfs attr
memory: samsung: exynos5422-dmc: Add module param to control IRQ mode
memory: samsung: exynos5422-dmc: Adjust polling interval and uptreshold
memory: samsung: exynos5422-dmc: Use delayed timer as default
PM / devfreq: Add support delayed timer for polling mode
dt-bindings: devfreq: rk3399_dmc: Add rockchip,pmu phandle
PM / devfreq: tegra: Add Dmitry as a maintainer
PM / devfreq: event: Fix trivial spelling
PM / devfreq: rk3399_dmc: Fix kernel oops when rockchip,pmu is absent
cpuidle: change enter_s2idle() prototype
cpuidle: psci: Prevent domain idlestates until consumers are ready
cpuidle: psci: Convert PM domain to platform driver
cpuidle: psci: Fix error path via converting to a platform driver
cpuidle: psci: Fail cpuidle registration if set OSI mode failed
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull new ARM SoC support from Arnd Bergmann:
"There are three SoC families newly dded to the 32-bit and 64-bit Arm
architecture code in the kernel this time:
- Daniel Palmer adds initial support for two chips made by MStar, a
taiwanese SoC manufacturer that became part of Mediatek in 2012.
For now, the added support is fairly minimal, with just two of its
Cortex-A7 based 32-bit camera chips getting support for a limited
set of on-chip peripherals.
- Lars Povlsen from Microchip adds support for their new Sparx5
family of ethernet switch chips using 64-bit Cortex-A53 cores.
These are descended from earlier VSC7xxx SparX and Ocelot chips
using 32-bit MIPS cores.
- Daniele Alessandrelli from Intel adds support for the new Keem Bay
SoC for computer vision, built around a Movidius VPU with Linux
running on Arm Cortex-A53 cores"
* tag 'arm-newsoc-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (38 commits)
ARM: mstar: Correct the compatible string for pmsleep
dt-bindings: arm: mstar: remove the binding description for mstar,pmsleep
dt-bindings: mfd: syscon: add compatible string for mstar,msc313-pmsleep
ARM: mstar: Add reboot support
ARM: mstar: Add "pmsleep" node to base dtsi
ARM: mstar: Add PMU
ARM: mstar: Adjust IMI size for infinity3
ARM: mstar: Adjust IMI size for mercury5
ARM: mstar: Adjust IMI size of infinity
ARM: mstar: Add IMI SRAM region
dt-bindings: arm: mstar: Move existing MStar binding descriptions
dt-bindings: arm: mstar: Add binding details for mstar, pmsleep
ARM: mstar: Fix dts filename for 70mai midrive d08
ARM: mstar: Add dts for 70mai midrive d08
ARM: mstar: Add dts for msc313(e) based BreadBee boards
ARM: mstar: Add mercury5 series dtsis
ARM: mstar: Add infinity/infinity3 family dtsis
ARM: mstar: Add Armv7 base dtsi
ARM: mstar: Add binding details for mstar,l3bridge
ARM: mstar: Add machine for MStar/Sigmastar Armv7 SoCs
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann:
"A couple of subsystems have their own subsystem maintainers but choose
to have the code merged through the soc tree as upstream, as the code
tends to be used across multiple SoCs or has SoC specific drivers
itself:
- memory controllers:
Krzysztof Kozlowski takes ownership of the drivers/memory subsystem
and its drivers, starting out with a set of cleanup patches.
A larger driver for the Tegra memory controller that was
accidentally missed for v5.8 is now added.
- reset controllers:
Only minor updates to drivers/reset this time
- firmware:
The "turris mox" firmware driver gains support for signed firmware
blobs The tegra firmware driver gets extended to export some debug
information Various updates to i.MX firmware drivers, mostly
cosmetic
- ARM SCMI/SCPI:
A new mechanism for platform notifications is added, among a number
of minor changes.
- optee:
Probing of the TEE bus is rewritten to better support detection of
devices that depend on the tee-supplicant user space. A new
firmware based trusted platform module (fTPM) driver is added based
on OP-TEE
- SoC attributes:
A new driver is added to provide a generic soc_device for
identifying a machine through the SMCCC ARCH_SOC_ID firmware
interface rather than by probing SoC family specific registers.
The series also contains some cleanups to the common soc_device
code.
There are also a number of updates to SoC specific drivers, the main
ones are:
- Mediatek cmdq driver gains a few in-kernel interfaces
- Minor updates to Qualcomm RPMh, socinfo, rpm drivers, mostly adding
support for additional SoC variants
- The Qualcomm GENI core code gains interconnect path voting and
performance level support, and integrating this into a number of
device drivers.
- A new driver for Samsung Exynos5800 voltage coupler for
- Renesas RZ/G2H (R8A774E1) SoC support gets added to a couple of SoC
specific device drivers
- Updates to the TI K3 Ring Accelerator driver"
* tag 'arm-drivers-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (164 commits)
soc: qcom: geni: Fix unused label warning
soc: qcom: smd-rpm: Fix kerneldoc
memory: jz4780_nemc: Only request IO memory the driver will use
soc: qcom: pdr: Reorder the PD state indication ack
MAINTAINERS: Add Git repository for memory controller drivers
memory: brcmstb_dpfe: Fix language typo
memory: samsung: exynos5422-dmc: Correct white space issues
memory: samsung: exynos-srom: Correct alignment
memory: pl172: Enclose macro argument usage in parenthesis
memory: of: Correct kerneldoc
memory: omap-gpmc: Fix language typo
memory: omap-gpmc: Correct white space issues
memory: omap-gpmc: Use 'unsigned int' for consistency
memory: omap-gpmc: Enclose macro argument usage in parenthesis
memory: omap-gpmc: Correct kerneldoc
memory: mvebu-devbus: Align with open parenthesis
memory: mvebu-devbus: Add missing braces to all arms of if statement
memory: bt1-l2-ctl: Add blank lines after declarations
soc: TI knav_qmss: make symbol 'knav_acc_range_ops' static
firmware: ti_sci: Replace HTTP links with HTTPS ones
...
|
|
Pull ARM SoC updates from Arnd Bergmann:
"These are mostly cosmetic changes and minor bugfixes for the SoC
specific code, across the 32-bit at91, mvebu, davinci, samsung, and
omap platforms.
The main notable changes are for the Samsung Exynos platform, which
sees a rewrite of gpio handling and a change to restore and adds a
workaround for a problem with cpuidle support"
* tag 'arm-soc-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
ARM: socfpga: PM: add missing put_device() call in socfpga_setup_ocram_self_refresh()
MAINTAINERS: arm/amlogic: add designated reviewers
ARM: davinci: dm646x-evm: Simplify error handling in 'evm_sw_setup()'
ARM: davinci: Fix trivial spelling
ARM: davinci: Replace HTTP links with HTTPS ones
ARM: s3c24xx: Replace HTTP links with HTTPS ones
ARM: orion/gpio: Make use of for_each_requested_gpio()
ARM: at91: Replace HTTP links with HTTPS ones
ARM: at91: pm: add missing put_device() call in at91_pm_sram_init()
ARM: rpc: Change blacklist to quirklist in ecode.c file
ARM: OMAP: Replace HTTP links with HTTPS ones
ARM: s3c24xx: leds: Convert to use GPIO descriptors
udc: lpc32xx: mark local function static
ARM: exynos: MCPM: Restore big.LITTLE cpuidle support
ARM: exynos: clear L310_AUX_CTRL_FULL_LINE_ZERO in default l2c_aux_val
|
|
Pull ARM SoC DT updates from Arnd Bergmann:
"As usual, there are many patches addressing minor issues in existing
DTS files, such as DTC warnings, or adding support for additional
peripherals.
There are three added SoCs in existing product families:
- Amazon:
Alpine v3 is a 16-core Cortex-A72 SoC from Amazon's Annapurna Labs,
otherwise known as AL73400 or first-generation Graviton, and
following the already supported Cortex-A1`5 and Cortex-A57 based
Alpine chips. This one is added together with the official
Evaluation platform.
- Qualcomm:
The Snapdragon SDM630 platform is a family of mid-range mobile
phone chips from 2017 based on Cortex-A53 or Kryo 260 CPUs. A total
of five end-user products are added based on these, all Android
phones from Sony: Xperia 10, 10 Plus, XA2, XA2 Plus and XA2 Ultra.
- Renesas:
RZ/G2H (r8a774e1) is currently the top model in the Renesas RZ/G
family, and apparently closely related to the RZ/G2N and RZ/G2M
models we already support but has a faster GPU and additional
on-chip peripherals. It is added along with the HopeRun HiHope
RZ/G2H development board
A small number of new boards for already supported SoCs also debut:
- Allwinner sunxi:
Only one new machine, revision v1.2 of the Pine64 PinePhone
(non-Android) smartphone, containing minor changes compared to
earlier versions.
- Amlogic Meson:
WeTek Core2 is an Amlogic S912 (GXM) based Set-top-box
- Aspeed:
EthanolX is AMD's EPYC data center rerence platform, using an
ASpeed AST2600 baseboard management controller.
- Mediatek:
Lenovo IdeaPad Duet 10.1" (kukui/krane) is a new Chromebook based
on the MT8183 (Helio P60t) SoC.
- Nvidia Tegra:
ASUS Google Nexus 7 and Acer Iconia Tab A500 are two Android
tablets from around 2012 using Tegra 3 and Tegra 2, respectively.
Thanks to PostmarketOS, these can now run mainline kernels and
become useful again.
The Jetson Xavier NX Developer Kit uses a SoM and carrier board for
the Tegra194, their latest 64-bit chip based on Carmel CPU cores
and Volta graphics.
- NXP i.MX:
Five new boards based on the 32-bit i.MX6 series are added: The
MYiR MYS-6ULX single-board computer, and four different models of
industrial computers from Protonic.
- Qualcomm:
MikroTik RouterBoard 3011 is a rackmounted router based on the
32-bit IPQ8064 networking SoC
Three older phones get added, the Snapdragon 808 (msm8992) based
Xiaomi Libra (Mi 4C) and Microsoft Lumia 950, originally running
Windows Phone, and the Snapdragon 810 (msm8994) based Sony Xperia
Z5.
- Renesas:
In addition to the HiHope RZ/G2H board mentioned above, we gain
support for board versions 3.0 and 4.0 of the earlier RZ/G2M and
RZ/G2N reference boards. Beacon EmbeddedWorks adds another
SoM+Carrier development board for RZ/G2M.
- Rockchips:
Radxa Rock Pi N8 development board and the VMARC RK3288 SoM it is
based on, using the high-end 32-bit rk3288 SoC.
Notable updates to existing platforms are usually for added on-chip
peripherals, including:
- ASpeed AST2xxx (various)
- Allwinner (cpufreq, thermal, Pinephone touchscreen)
- Amlogic Meson (audio, gpu dvdfs, board updates)
- Arm Versatile
- Broadcom (board updates for switch ports, Raspberry pi clock updates)
- Hisilicon (various)
- Intel/Altera SoCFPGA (various)
- Marvell Armada 7xxx/8xxx (smmu)
- Marvell MMP (GPU on mmp2/mmp3)
- Mediatek mt8183 (USB, pericfg)
- NXP Layerscape (VPU, thermal, DSPI)
- NXP i.MX (VPU, bindings, board updates)
- Nvidia Tegra194 (GPU)
- Qualcomm (GPU, Interconnect, ...)
- Renesas R-Car (SPI, IPMMU, board updates)
- STMicroelectronics STM32 (various)
- Samsung Exynos (various)
- Socionext Uniphier (updates to serial, and pcie)
- TI K3 (serdes, usb3, audio, sd, chipid)
- TI OMAP (IPU/DSP remoteproc changes, dropping platform data)"
* tag 'arm-dt-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (605 commits)
arm64: dts: meson: odroid-n2: add jack audio output support
arm64: dts: meson: odroid-n2: enable audio loopback
ARM: dts: berlin: Align L2 cache-controller nodename with dtschema
arm64: dts: qcom: Add Microsoft Lumia 950 (Talkman) device tree
arm64: dts: qcom: Add Xiaomi Libra (Mi 4C) device tree
arm64: dts: qcom: msm8992: Add RPMCC node
arm64: dts: qcom: msm8992: Add PSCI support.
arm64: dts: qcom: msm8992: Add PMU node
arm64: dts: qcom: msm8992: Add BLSP2_UART2 and I2C nodes
arm64: dts: qcom: msm8992: Add SPMI PMIC arbiter device
arm64: dts: qcom: msm8992: Add a SCM node
arm64: dts: qcom: msm8992: Add a proper CPU map
arm64: dts: qcom: bullhead: Move UART pinctrl to SoC
arm64: dts: qcom: bullhead: Add qcom,msm-id
arm64: dts: qcom: msm8992: Fix SDHCI1
arm64: dts: qcom: msm8992: Modernize the DTS style
arm64: dts: qcom: Add support for Sony Xperia Z5 (SoMC Sumire-RoW)
arm64: dts: qcom: Move msm8994-smd-rpm contents to lg-bullhead.
arm64: dts: qcom: msm8994: Add support for SMD RPM
arm64: dts: qcom: msm8992: Add a label to rpm-requests
...
|
|
git://git.infradead.org/linux-platform-drivers-x86
Pull x86 platform driver updates from Andy Shevchenko:
- ASUS WMI driver honors BAT1 name of the battery (quite a few new
laptops are using it)
- Dell WMI driver supports new key codes and backlight events
- ThinkPad ACPI driver now may use standard charge threshold interface,
it also has been updated to provide Laptop or Desktop mode to the
user
- Intel Speed Select Technology gained support on Sapphire Rapids
platform
- Regular update of Speed Select Technology tools
- Mellanox has been updated to support complex attributes
- PMC core driver has been fixed to show correct names for LPM0
register
- HTTP links were replaced by HTTPS ones where it applies
- Miscellaneous fixes and cleanups here and there
* tag 'platform-drivers-x86-v5.9-1' of git://git.infradead.org/linux-platform-drivers-x86: (42 commits)
platform/x86: asus-nb-wmi: Drop duplicate DMI quirk structures
platform/x86: thinkpad_acpi: Make some symbols static
platform/x86: thinkpad_acpi: add documentation for battery charge control
platform/x86: thinkpad_acpi: use standard charge control attribute names
platform/x86: thinkpad_acpi: remove unused defines
platform/x86: ISST: drop a duplicated word in isst_if.h
tools/power/x86/intel-speed-select: Update version for v5.9
tools/power/x86/intel-speed-select: Add retries for mail box commands
tools/power/x86/intel-speed-select: Add option to delay mbox commands
tools/power/x86/intel-speed-select: Ignore -o option processing on error
tools/power/x86/intel-speed-select: Change path for caching topology info
platform/x86: acerhdf: Replace HTTP links with HTTPS ones
platform/x86: apple-gmux: Replace HTTP links with HTTPS ones
platform/x86: pcengines-apuv2: revert wiring up simswitch GPIO as LED
platform/x86: mlx-platform: Extend FAN platform data description
platform_data/mlxreg: Add presence register field for FAN devices
Documentation/ABI: Add new attribute for mlxreg-io sysfs interfaces
platform/mellanox: mlxreg-io: Add support for complex attributes
platform/x86: mlx-platform: Add more definitions for system attributes
platform_data/mlxreg: Add support for complex attributes
...
|
|
'clk-debugfs' into clk-next
- RMU and DMAC/GPIO clock support for Actions Semi S500 SoCs
* clk-actions:
MAINTAINERS: Add reset binding entry for Actions Semi Owl SoCs
clk: actions: Add Actions S500 SoC Reset Management Unit support
dt-bindings: reset: Add binding constants for Actions S500 RMU
clk: actions: Add APB, DMAC, GPIO clock support for Actions S500 SoC
dt-bindings: clock: Add APB, DMAC, GPIO bindings for Actions S500 SoC
clk: actions: Fix h_clk for Actions S500 SoC
* clk-rockchip:
clk: rockchip: add sclk_mac_lbtest to rk3188_critical_clocks
clk: rockchip: Revert "fix wrong mmc sample phase shift for rk3328"
clk: rockchip: use separate compatibles for rk3288w-cru
dt-bindings: clocks: add rk3288w variant compatible
clk: rockchip: Handle clock tree for rk3288w variant
clk: rockchip: convert rk3036 pll type to use internal lock status
clk: rockchip: convert basic pll lock_wait to use regmap_read_poll_timeout
clk: rockchip: convert rk3399 pll type to use readl_relaxed_poll_timeout
* clk-iproc:
clk: iproc: round clock rate to the closest
* clk-intel:
clk: intel: Avoid unnecessary memset by improving code
clk: intel: Improve locking in the driver
clk: intel: Use devm_clk_hw_register() instead of clk_hw_register()
* clk-debugfs:
clk: Add support for enabling/disabling clocks from debugfs
|
