summaryrefslogtreecommitdiff
path: root/Documentation
AgeCommit message (Collapse)AuthorFilesLines
2017-05-29Merge tag 'pinctrl-v4.12-2' of ↵Linus Torvalds1-2/+0
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control fixes from Linus Walleij: "Here is an overdue pull request for pin control fixes, the most prominent feature is to make Intel Chromebooks (and I suspect any other Cherryview-based Intel thing) happy again, which we really want to see. There is a patch hitting drivers/firmware/* that I was uncertain to who actually manages, but I got Andy Shevchenko's and Dmitry Torokov's review tags on it and I trust them both 100% to do the right thing for Intel platform drivers. Summary: - Make a few Intel Chromebooks with Cherryview DMI firmware work smoothly. - A fix for some bogus allocations in the generic group management code. - Some GPIO descriptor lookup table stubs. Merged through the pin control tree for administrative reasons. - Revert the "bi-directional" and "output-enable" generic properties: we need more discussions around this. It seems other SoCs are using input/output gate enablement and these terms are not correct. - Fix mux and drive strength atomically in the MXS driver. - Fix the SPDIF function on sunxi A83T. - OF table terminators and other small fixes" * tag 'pinctrl-v4.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: sunxi: Fix SPDIF function name for A83T pinctrl: mxs: atomically switch mux and drive strength config pinctrl: cherryview: Extend the Chromebook DMI quirk to Intel_Strago systems firmware: dmi: Add DMI_PRODUCT_FAMILY identification string pinctrl: core: Fix warning by removing bogus code gpiolib: Add stubs for gpiod lookup table interface Revert "pinctrl: generic: Add bi-directional and output-enable" pinctrl: cherryview: Add terminate entry for dmi_system_id tables
2017-05-26Merge branch 'for-linus' of ↵Linus Torvalds2-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input layer fixes from Dmitry Torokhov: "Just a few fixups to a couple of drivers" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: elan_i2c - ignore signals when finishing updating firmware Input: elan_i2c - clear INT before resetting controller Input: atmel_mxt_ts - add T100 as a readable object Input: edt-ft5x06 - increase allowed data range for threshold parameter
2017-05-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds1-0/+4
Pull networking fixes from David Miller: 1) Fix state pruning in bpf verifier wrt. alignment, from Daniel Borkmann. 2) Handle non-linear SKBs properly in SCTP ICMP parsing, from Davide Caratti. 3) Fix bit field definitions for rss_hash_type of descriptors in mlx5 driver, from Jesper Brouer. 4) Defer slave->link updates until bonding is ready to do a full commit to the new settings, from Nithin Sujir. 5) Properly reference count ipv4 FIB metrics to avoid use after free situations, from Eric Dumazet and several others including Cong Wang and Julian Anastasov. 6) Fix races in llc_ui_bind(), from Lin Zhang. 7) Fix regression of ESP UDP encapsulation for TCP packets, from Steffen Klassert. 8) Fix mdio-octeon driver Kconfig deps, from Randy Dunlap. 9) Fix regression in setting DSCP on ipv6/GRE encapsulation, from Peter Dawson. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (43 commits) ipv4: add reference counting to metrics net: ethernet: ax88796: don't call free_irq without request_irq first ip6_tunnel, ip6_gre: fix setting of DSCP on encapsulated packets sctp: fix ICMP processing if skb is non-linear net: llc: add lock_sock in llc_ui_bind to avoid a race condition bonding: Don't update slave->link until ready to commit test_bpf: Add a couple of tests for BPF_JSGE. bpf: add various verifier test cases bpf: fix wrong exposure of map_flags into fdinfo for lpm bpf: add bpf_clone_redirect to bpf_helper_changes_pkt_data bpf: properly reset caller saved regs after helper call and ld_abs/ind bpf: fix incorrect pruning decision when alignment must be tracked arp: fixed -Wuninitialized compiler warning tcp: avoid fastopen API to be used on AF_UNSPEC net: move somaxconn init from sysctl code net: fix potential null pointer dereference geneve: fix fill_info when using collect_metadata virtio-net: enable TSO/checksum offloads for Q-in-Q vlans be2net: Fix offload features for Q-in-Q packets vlan: Fix tcp checksum offloads in Q-in-Q vlans ...
2017-05-26Merge tag 'mmc-v4.12-rc2' of ↵Linus Torvalds2-0/+8
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc Pull MMC fixes from Ulf Hansson: "This contains fixes to make the WiFi work again for the ARM64 Hikey board. Together with a couple of DTS updates for the Hikey board we have also extended the mmc pwrseq_simple, to support a new power-off-delay-us DT property, as that was required to enable a graceful power off sequence for the WiFi chip" * tag 'mmc-v4.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: arm64: dts: hikey: Fix WiFi support arm64: dts: hi6220: Move board data from the dwmmc nodes to hikey dts arm64: dts: hikey: Add the SYS_5V and the VDD_3V3 regulators arm64: dts: hi6220: Move the fixed_5v_hub regulator to the hikey dts arm64: dts: hikey: Add clock for the pmic mfd mfd: dts: hi655x: Add clock binding for the pmic mmc: pwrseq_simple: Parse DTS for the power-off-delay-us property mmc: dt: pwrseq-simple: Invent power-off-delay-us
2017-05-26Merge tag 'sound-4.12-rc3' of ↵Linus Torvalds1-49/+65
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "This contains a few HD-audio device-specific quirks and an endianess fix for USB-audio, as well as the update of quirk model list document. All fixes are small and trivial. The document update could have been postponed, but it's a good thing for user and has absolutely zero risk of breakage, so included here" * tag 'sound-4.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda - apply STAC_9200_DELL_M22 quirk for Dell Latitude D430 ALSA: hda - Update the list of quirk models ALSA: hda - Provide dual-codecs model option for a few Realtek codecs ALSA: hda - Apply dual-codec quirk for MSI Z270-Gaming mobo ALSA: hda - No loopback on ALC299 codec ALSA: usb-audio: fix Amanero Combo384 quirk on big-endian hosts
2017-05-24net: fec: add post PHY reset delay DT propertyQuentin Schulz1-0/+4
Some PHY require to wait for a bit after the reset GPIO has been toggled. This adds support for the DT property `phy-reset-post-delay` which gives the delay in milliseconds to wait after reset. If the DT property is not given, no delay is observed. Post reset delay greater than 1000ms are invalid. Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Fugang Duan <fugang.duan@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-23mfd: dts: hi655x: Add clock binding for the pmicDaniel Lezcano1-0/+6
The hi655x PMIC provides the regulators but also a clock. The latter is missing in the definition, so extend the documentation to include this as well. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Lee Jones <lee.jones@linaro.org> [Ulf: Split patch and updated changelog] Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de>
2017-05-23mmc: dt: pwrseq-simple: Invent power-off-delay-usUlf Hansson1-0/+2
During power off, after the GPIO pin has been asserted, some devices like the Wifi chip from TI, Wl18xx, needs a delay before the host continues with clock gating and turning off regulators as to follow a graceful shutdown sequence. Therefore invent an optional power-off-delay-us DT binding for mmc-pwrseq-simple, to allow us to support this constraint. Cc: devicetree@vger.kernel.org Cc: Rob Herring <robh+dt@kernel.org> Cc: linux-mmc@vger.kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de>
2017-05-22Merge tag 'acpi-4.12-rc3' of ↵Linus Torvalds1-4/+12
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI fixes from Rafael Wysocki: "These revert a 4.11 change that turned out to be problematic and add a .gitignore file. Specifics: - Revert a 4.11 commit related to the ACPI-based handling of laptop lids that made changes incompatible with existing user space stacks and broke things there (Lv Zheng). - Add .gitignore to the ACPI tools directory (Prarit Bhargava)" * tag 'acpi-4.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: Revert "ACPI / button: Remove lid_init_state=method mode" tools/power/acpi: Add .gitignore file
2017-05-22Input: edt-ft5x06 - increase allowed data range for threshold parameterMartin Kepplinger2-2/+2
The datasheet and application note does not mention an allowed range for the M09_REGISTER_THRESHOLD parameter. One of our customers needs to set lower values than 20 and they seem to work just fine on EDT EP0xx0M09 with T5x06 touch. So, lacking a known lower limit, we increase the range for thresholds, and set the lower limit to 0. The documentation is updated accordingly. Signed-off-by: Schoefegger Stefan <stefan.schoefegger@ginzinger.com> Signed-off-by: Manfred Schlaegl <manfred.schlaegl@ginzinger.com> Signed-off-by: Martin Kepplinger <martin.kepplinger@ginzinger.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-05-22Merge branches 'acpi-button' and 'acpi-tools'Rafael J. Wysocki1-4/+12
* acpi-button: Revert "ACPI / button: Remove lid_init_state=method mode" * acpi-tools: tools/power/acpi: Add .gitignore file
2017-05-22Merge branches 'intel_pstate', 'pm-cpufreq' and 'pm-cpufreq-sched'Rafael J. Wysocki4-290/+766
* intel_pstate: cpufreq: intel_pstate: Document the current behavior and user interface * pm-cpufreq: cpufreq: dbx500: add a Kconfig symbol * pm-cpufreq-sched: cpufreq: schedutil: use now as reference when aggregating shared policy requests
2017-05-22ALSA: hda - Update the list of quirk modelsTakashi Iwai1-49/+65
I've forgotten to sync the documentation with the actually available options for some time. Now all updated. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-05-22Revert "pinctrl: generic: Add bi-directional and output-enable"Linus Walleij1-2/+0
This reverts commit 8c58f1a7a4b6d1d723bf25fef9d842d5a11200d0. It turns out that applying these generic properties was premature: the properties used in the driver using this are of unclear electrical nature and the subject need to be discussed. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-05-20Merge tag 'staging-4.12-rc2' of ↵Linus Torvalds1-31/+0
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging driver fixes from Greg KH: "Here are a number of staging driver fixes for 4.12-rc2 Most of them are typec driver fixes found by reviewers and users of the code. There are also some removals of files no longer needed in the tree due to the ion driver rewrite in 4.12-rc1, as well as some wifi driver fixes. And to round it out, a MAINTAINERS file update. All have been in linux-next with no reported issues" * tag 'staging-4.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (22 commits) MAINTAINERS: greybus-dev list is members-only staging: fsl-dpaa2/eth: add ETHERNET dependency staging: typec: fusb302: refactor resume retry mechanism staging: typec: fusb302: reset i2c_busy state in error staging: rtl8723bs: remove re-positioned call to kfree in os_dep/ioctl_cfg80211.c staging: rtl8192e: GetTs Fix invalid TID 7 warning. staging: rtl8192e: rtl92e_get_eeprom_size Fix read size of EPROM_CMD. staging: rtl8192e: fix 2 byte alignment of register BSSIDR. staging: rtl8192e: rtl92e_fill_tx_desc fix write to mapped out memory. staging: vc04_services: Fix bulk cache maintenance staging: ccree: remove extraneous spin_unlock_bh() in error handler staging: typec: Fix sparse warnings about incorrect types staging: typec: fusb302: do not free gpio from managed resource staging: typec: tcpm: Fix Port Power Role field in PS_RDY messages staging: typec: tcpm: Respond to Discover Identity commands staging: typec: tcpm: Set correct flags in PD request messages staging: typec: tcpm: Drop duplicate PD messages staging: typec: fusb302: Fix chip->vbus_present init value staging: typec: fusb302: Fix module autoload staging: typec: tcpci: declare private structure as static ...
2017-05-20Merge tag 'usb-4.12-rc2' of ↵Linus Torvalds1-4/+2
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are a number of small USB fixes for 4.12-rc2 Most of them come from Johan, in his valiant quest to fix up all drivers that could be affected by "malicious" USB devices. There's also some fixes for more "obscure" drivers to handle some of the vmalloc stack fallout (which for USB drivers, was always the case, but very few people actually ran those systems...) Other than that, the normal set of xhci and gadget and musb driver fixes as well. All have been in linux-next with no reported issues" * tag 'usb-4.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (42 commits) usb: musb: tusb6010_omap: Do not reset the other direction's packet size usb: musb: Fix trying to suspend while active for OTG configurations usb: host: xhci-plat: propagate return value of platform_get_irq() xhci: Fix command ring stop regression in 4.11 xhci: remove GFP_DMA flag from allocation USB: xhci: fix lock-inversion problem usb: host: xhci-ring: don't need to clear interrupt pending for MSI enabled hcd usb: host: xhci-mem: allocate zeroed Scratchpad Buffer xhci: apply PME_STUCK_QUIRK and MISSING_CAS quirk for Denverton usb: xhci: trace URB before giving it back instead of after USB: serial: qcserial: add more Lenovo EM74xx device IDs USB: host: xhci: use max-port define USB: hub: fix SS max number of ports USB: hub: fix non-SS hub-descriptor handling USB: hub: fix SS hub-descriptor handling USB: usbip: fix nonconforming hub descriptor USB: gadget: dummy_hcd: fix hub-descriptor removable fields doc-rst: fixed kernel-doc directives in usb/typec.rst USB: core: of: document reference taken by companion helper USB: ehci-platform: fix companion-device leak ...
2017-05-19iTCO_wdt: all versions count down twicePaolo Bonzini1-1/+1
The ICH9 is listed as having TCO v2, and indeed the behavior in the datasheet corresponds to v2 (for example the NO_REBOOT flag is accessible via the 16KiB-aligned Root Complex Base Address). However, the TCO counts twice just like in v1; the documentation of the SECOND_TO_STS bit says: "ICH9 sets this bit to 1 to indicate that the TIMEOUT bit had been (or is currently) set and a second timeout occurred before the TCO_RLD register was written. If this bit is set and the NO_REBOOT config bit is 0, then the ICH9 will reboot the system after the second timeout. The same can be found in the BayTrail (Atom E3800) datasheet, and even HOWTOs around the Internet say that it will reboot after _twice_ the specified heartbeat. I did not find the Apollo Lake datasheet, but because v4/v5 has a SECOND_TO_STS bit just like the previous version I'm enabling this for Apollo Lake as well. Cc: linux-watchdog@vger.kernel.org Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2017-05-17doc-rst: fixed kernel-doc directives in usb/typec.rstMarkus Heiser1-4/+2
Even if this file is not yet included in any toctree, it is parsed by Sphinx since it is named '.rst'. This patch fixes the following two ERRORs from Sphinx build: Documentation/usb/typec.rst:116: ERROR: Error in "kernel-doc" directive: invalid option block. .. kernel-doc:: drivers/usb/typec/typec.c :functions: typec_register_cable typec_unregister_cable typec_register_plug typec_unregister_plug Documentation/usb/typec.rst:139: ERROR: Error in "kernel-doc" directive: invalid option block. .. kernel-doc:: drivers/usb/typec/typec.c :functions: typec_set_data_role typec_set_pwr_role typec_set_vconn_role typec_set_pwr_opmode Signed-off-by: Markus Heiser <markus.heiser@darmarit.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-15staging/android/ion: remove useless document fileYisheng Xie1-31/+0
After commit 9828282e33a0 ("staging: android: ion: Remove old platform support"), the document about devicetree of ion is no need anymore, so just remove it. Signed-off-by: Yisheng Xie <xieyisheng1@huawei.com> Acked-by: Laura Abbott <labbott@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-14cpufreq: intel_pstate: Document the current behavior and user interfaceRafael J. Wysocki4-290/+766
Add a document describing the current behavior and user space interface of the intel_pstate driver in the RST format and drop the existing outdated intel_pstate.txt document. Also update admin-guide/pm/cpufreq.rst with proper RST references to the new intel_pstate.rst document. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-05-12mm, docs: update memory.stat description with workingset* entriesRoman Gushchin1-0/+12
Commit 4b4cea91691d ("mm: vmscan: fix IO/refault regression in cache workingset transition") introduced three new entries in memory stat file: - workingset_refault - workingset_activate - workingset_nodereclaim This commit adds a corresponding description to the cgroup v2 docs. Link: http://lkml.kernel.org/r/1494530293-31236-1-git-send-email-guro@fb.com Signed-off-by: Roman Gushchin <guro@fb.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Tejun Heo <tj@kernel.org> Cc: Li Zefan <lizefan@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-05-12Tigran has movedAndrew Morton1-1/+1
Cc: Tigran Aivazian <aivazian.tigran@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-05-12Revert "ACPI / button: Remove lid_init_state=method mode"Lv Zheng1-4/+12
This reverts commit ecb10b694b72ca5ea51b3c90a71ff2a11963425a. The only expected ACPI control method lid device's usage model is 1. Listen to the lid notification, 2. Evaluate _LID after being notified by BIOS, 3. Suspend the system (if users configure to do so) after seeing "close". It's not ensured that BIOS will notify OS after boot/resume, and it's not ensured that BIOS will always generate "open" event upon opening the lid. But there are 2 wrong usage models: 1. When the lid device is responsible for suspend/resume the system, userspace requires to see "open" event to be paired with "close" after the system is resumed, or it will suspend the system again. 2. When an external monitor connects to the laptop attached docks, userspace requires to see "close" event after the system is resumed so that it can determine whether the internal display should remain dark and the external display should be lit on. After we made default kernel behavior to be suitable for usage model 1, users of usage model 2 start to report regressions for such behavior change. Reversion of button.lid_init_state=method doesn't actually reverts to old default behavior as doing so can enter a regression loop, but facilitates users to work the reported regressions around with button.lid_init_state=method. Fixes: ecb10b694b72 (ACPI / button: Remove lid_init_state=method mode) Cc: 4.11+ <stable@vger.kernel.org> # 4.11+ Link: https://bugzilla.kernel.org/show_bug.cgi?id=195455 Link: https://bugzilla.redhat.com/show_bug.cgi?id=1430259 Tested-by: Steffen Weber <steffen.weber@gmail.com> Tested-by: Julian Wiedmann <julian.wiedmann@jwi.name> Reported-by: Joachim Frieben <jfrieben@hotmail.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-05-12Merge tag 'for-v4.12-2' of ↵Linus Torvalds1-0/+20
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply Pull more power-supply updates from Sebastian Reichel: "The power-supply subsystem has a few more changes for the v4.12 merge window: - New battery driver for AXP20X and AXP22X PMICs - Improve max17042_battery for usage on x86 - Misc small cleanups & fixes" * tag 'for-v4.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (34 commits) power: supply: cpcap-charger: Keep trickle charger bits disabled power: supply: cpcap-charger: Fix enable for 3.8V charge setting power: supply: cpcap-charger: Fix charge voltage configuration power: supply: cpcap-charger: Fix charger name power: supply: twl4030-charger: make twl4030_bci_property_is_writeable static power: supply: sbs-battery: Add alert callback mailmap: add Sebastian Reichel power: supply: avoid unused twl4030-madc.h power: supply: sbs-battery: Correct supply status with current draw power: supply: sbs-battery: Don't ignore the first external power change power: supply: pda_power: move from timer to delayed_work power: supply: max17042_battery: Add support for the SCOPE property power: supply: max17042_battery: Add support for the CHARGE_NOW property power: supply: max17042_battery: Add support for the CHARGE_FULL_DESIGN property power: supply: max17042_battery: mAh readings depend on r_sns value power: supply: max17042_battery: Add support for the VOLT_MIN property power: supply: max17042_battery: Add support for the TECHNOLOGY attribute power: supply: max17042_battery: Add external_power_changed callback power: supply: max17042_battery: Add support for the STATUS property power: supply: max17042_battery: Add default platform_data fallback data ...
2017-05-12Merge branch 'next' of ↵Linus Torvalds4-4/+122
git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux Pull thermal management updates from Zhang Rui: - Fix a problem where orderly_shutdown() is called for multiple times due to multiple critical overheating events raised in a short period by platform thermal driver. (Keerthy) - Introduce a backup thermal shutdown mechanism, which invokes kernel_power_off()/emergency_restart() directly, after orderly_shutdown() being issued for certain amount of time(specified via Kconfig). This is useful in certain conditions that userspace may be unable to power off the system in a clean manner and leaves the system in a critical state, like in the middle of driver probing phase. (Keerthy) - Introduce a new interface in thermal devfreq_cooling code so that the driver can provide more precise data regarding actual power to the thermal governor every time the power budget is calculated. (Lukasz Luba) - Introduce BCM 2835 soc thermal driver and northstar thermal driver, within a new sub-folder. (Rafał Miłecki) - Introduce DA9062/61 thermal driver. (Steve Twiss) - Remove non-DT booting on TI-SoC driver. Also add support to fetching coefficients from DT. (Keerthy) - Refactorf RCAR Gen3 thermal driver. (Niklas Söderlund) - Small fix on MTK and intel-soc-dts thermal driver. (Dawei Chien, Brian Bian) * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: (25 commits) thermal: core: Add a back up thermal shutdown mechanism thermal: core: Allow orderly_poweroff to be called only once Thermal: Intel SoC DTS: Change interrupt request behavior trace: thermal: add another parameter 'power' to the tracing function thermal: devfreq_cooling: add new interface for direct power read thermal: devfreq_cooling: refactor code and add get_voltage function thermal: mt8173: minor mtk_thermal.c cleanups thermal: bcm2835: move to the broadcom subdirectory thermal: broadcom: ns: specify myself as MODULE_AUTHOR thermal: da9062/61: Thermal junction temperature monitoring driver Documentation: devicetree: thermal: da9062/61 TJUNC temperature binding thermal: broadcom: add Northstar thermal driver dt-bindings: thermal: add support for Broadcom's Northstar thermal thermal: bcm2835: add thermal driver for bcm2835 SoC dt-bindings: Add thermal zone to bcm2835-thermal example thermal: rcar_gen3_thermal: add suspend and resume support thermal: rcar_gen3_thermal: store device match data in private structure thermal: rcar_gen3_thermal: enable hardware interrupts for trip points thermal: rcar_gen3_thermal: record and check number of TSCs found thermal: rcar_gen3_thermal: check that TSC exists before memory allocation ...
2017-05-12Merge branch 'for-next' of ↵Linus Torvalds1-0/+80
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending Pull SCSI target updates from Nicholas Bellinger: "Things were a lot more calm than previously expected. It's primarily fixes in various areas, with most of the new functionality centering around TCMU backend driver work that Xiubo Li has been driving. Here's the summary on the feature side: - Make T10-PI verify configurable for emulated (FILEIO + RD) backends (Dmitry Monakhov) - Allow target-core/TCMU pass-through to use in-kernel SPC-PR logic (Bryant Ly + MNC) - Add TCMU support for growing ring buffer size (Xiubo Li + MNC) - Add TCMU support for global block data pool (Xiubo Li + MNC) and on the bug-fix side: - Fix COMPARE_AND_WRITE non GOOD status handling for READ phase failures (Gary Guo + nab) - Fix iscsi-target hang with explicitly changing per NodeACL CmdSN number depth with concurrent login driven session reinstatement. (Gary Guo + nab) - Fix ibmvscsis fabric driver ABORT task handling (Bryant Ly) - Fix target-core/FILEIO zero length handling (Bart Van Assche) Also, there was an OOPs introduced with the WRITE_VERIFY changes that I ended up reverting at the last minute, because as not unusual Bart and I could not agree on the fix in time for -rc1. Since it's specific to a conformance test, it's been reverted for now. There is a separate patch in the queue to address the underlying control CDB write overflow regression in >= v4.3 separate from the WRITE_VERIFY revert here, that will be pushed post -rc1" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (30 commits) Revert "target: Fix VERIFY and WRITE VERIFY command parsing" IB/srpt: Avoid that aborting a command triggers a kernel warning IB/srpt: Fix abort handling target/fileio: Fix zero-length READ and WRITE handling ibmvscsis: Do not send aborted task response tcmu: fix module removal due to stuck thread target: Don't force session reset if queue_depth does not change iscsi-target: Set session_fall_back_to_erl0 when forcing reinstatement target: Fix compare_and_write_callback handling for non GOOD status tcmu: Recalculate the tcmu_cmd size to save cmd area memories tcmu: Add global data block pool support tcmu: Add dynamic growing data area feature support target: fixup error message in target_tg_pt_gp_tg_pt_gp_id_store() target: fixup error message in target_tg_pt_gp_alua_access_type_store() target/user: PGR Support target: Add WRITE_VERIFY_16 Documentation/target: add an example script to configure an iSCSI target target: Use kmalloc_array() in transport_kmap_data_sg() target: Use kmalloc_array() in compare_and_write_callback() target: Improve size determinations in two functions ...
2017-05-12Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: "Misc fixes: - two boot crash fixes - unwinder fixes - kexec related kernel direct mappings enhancements/fixes - more Clang support quirks - minor cleanups - Documentation fixes" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/intel_rdt: Fix a typo in Documentation x86/build: Don't add -maccumulate-outgoing-args w/o compiler support x86/boot/32: Fix UP boot on Quark and possibly other platforms x86/mm/32: Set the '__vmalloc_start_set' flag in initmem_init() x86/kexec/64: Use gbpages for identity mappings if available x86/mm: Add support for gbpages to kernel_ident_mapping_init() x86/boot: Declare error() as noreturn x86/mm/kaslr: Use the _ASM_MUL macro for multiplication to work around Clang incompatibility x86/mm: Fix boot crash caused by incorrect loop count calculation in sync_global_pgds() x86/asm: Don't use RBP as a temporary register in csum_partial_copy_generic() x86/microcode/AMD: Remove redundant NULL check on mc
2017-05-12Merge tag 'powerpc-4.12-2' of ↵Linus Torvalds2-1/+268
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull more powerpc updates from Michael Ellerman: "The change to the Linux page table geometry was delayed for more testing with 16G pages, and there's the new CPU features stuff which just needed one more polish before going in. Plus a few changes from Scott which came in a bit late. And then various fixes, mostly minor. Summary highlights: - rework the Linux page table geometry to lower memory usage on 64-bit Book3S (IBM chips) using the Hash MMU. - support for a new device tree binding for discovering CPU features on future firmwares. - Freescale updates from Scott: "Includes a fix for a powerpc/next mm regression on 64e, a fix for a kernel hang on 64e when using a debugger inside a relocated kernel, a qman fix, and misc qe improvements." Thanks to: Christophe Leroy, Gavin Shan, Horia Geantă, LiuHailong, Nicholas Piggin, Roy Pledge, Scott Wood, Valentin Longchamp" * tag 'powerpc-4.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/64s: Support new device tree binding for discovering CPU features powerpc: Don't print cpu_spec->cpu_name if it's NULL of/fdt: introduce of_scan_flat_dt_subnodes and of_get_flat_dt_phandle powerpc/64s: Fix unnecessary machine check handler relocation branch powerpc/mm/book3s/64: Rework page table geometry for lower memory usage powerpc: Fix distclean with Makefile.postlink powerpc/64e: Don't place the stack beyond TASK_SIZE powerpc/powernv: Block PCI config access on BCM5718 during EEH recovery powerpc/8xx: Adding support of IRQ in MPC8xx GPIO soc/fsl/qbman: Disable IRQs for deferred QBMan work soc/fsl/qe: add EXPORT_SYMBOL for the 2 qe_tdm functions soc/fsl/qe: only apply QE_General4 workaround on affected SoCs soc/fsl/qe: round brg_freq to 1kHz granularity soc/fsl/qe: get rid of immrbar_virt_to_phys() net: ethernet: ucc_geth: fix MEM_PART_MURAM mode powerpc/64e: Fix hang when debugging programs with relocated kernel
2017-05-11Merge tag 'docs-4.12-2' of git://git.lwn.net/linuxLinus Torvalds6-8/+9
Pull more documentation updates from Jonathan Corbet: "Connect the newly RST-formatted documentation to the rest; this had to wait until the input pull was done. There's also a few small fixes that wandered in" * tag 'docs-4.12-2' of git://git.lwn.net/linux: doc: replace FTP URL to kernel.org with HTTPS one docs: update references to the device io book Documentation: earlycon: fix Marvell Armada 3700 UART name docs-rst: add input docs at main index and use kernel-figure
2017-05-11Merge tag 'arm64-upstream' of ↵Linus Torvalds1-15/+47
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull more arm64 updates from Catalin Marinas: - Silence module allocation failures when CONFIG_ARM*_MODULE_PLTS is enabled. This requires a check for __GFP_NOWARN in alloc_vmap_area() - Improve/sanitise user tagged pointers handling in the kernel - Inline asm fixes/cleanups * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: Silence first allocation with CONFIG_ARM64_MODULE_PLTS=y ARM: Silence first allocation with CONFIG_ARM_MODULE_PLTS=y mm: Silence vmap() allocation failures based on caller gfp_flags arm64: uaccess: suppress spurious clang warning arm64: atomic_lse: match asm register sizes arm64: armv8_deprecated: ensure extension of addr arm64: uaccess: ensure extension of access_ok() addr arm64: ensure extension of smp_store_release value arm64: xchg: hazard against entire exchange variable arm64: documentation: document tagged pointer stack constraints arm64: entry: improve data abort handling of tagged pointers arm64: hw_breakpoint: fix watchpoint matching for tagged pointers arm64: traps: fix userspace cache maintenance emulation on a tagged pointer
2017-05-11Merge tag 'fbdev-v4.12' of git://github.com/bzolnier/linuxLinus Torvalds1-0/+2
Pull fbdev updates from Bartlomiej Zolnierkiewicz: "There is nothing really major here, just a couple of small bugfixes, improvements and cleanups. - fix handling of probing errors in omapfb (Arvind Yadav) - remove incorrect __exit markups in few drivers (Dmitry Torokhov) - fix boot time logo support for drivers using deferred probe (Takeshi Kihara) - fix DMA allocation size for ARM CLCD driver (Liam Beguin) - add support for specifying size via xenstore in xen-frontfb (Juergen Gross) - support for AUS mode in imxfb driver (Martin Kaiser) - fix buffer on stack usage in udlfb driver (Maksim Salau) - probe failure path fixup in sm501fb driver (Alexey Khoroshilov) - fix config dependency loop for stifb driver (Arnd Bergmann) - misc cleanups (Joe Perches, Christophe Leroy, Karim Eshapa, Pushkar Jambhlekar)" * tag 'fbdev-v4.12' of git://github.com/bzolnier/linux: fbdev: sti: don't select CONFIG_VT drivers/video/fbdev/omap/lcd_mipid.c: Use time comparison kernel macros sm501fb: don't return zero on failure path in sm501fb_start() video: fbdev: udlfb: Fix buffer on stack video: console: Remove reference to CONFIG_8xx dt-bindings: display: imx: entry for AUS mode video: fbdev: imxfb: support AUS mode drivers/video/fbdev: Fixing coding guidelines in acornfb.c xen, fbfront: add support for specifying size via xenstore video: ARM CLCD: fix dma allocation size drivers/video: Convert remaining uses of pr_warning to pr_warn video/logo: tidyup fb_logo_late_init initcall timing video: fbdev: i810: remove incorrect __exit markups video: fbdev: pmag-aa-fb: remove incorrect __exit markups video: fbdev: pmagb-b-fb: remove incorrect __exit markups video: fbdev: pmag-ba-fb: remove incorrect __exit markups omapfb: dss: Handle return errors in dss_init_ports()
2017-05-11Merge branch 'for-linus' of git://git.kernel.dk/linux-blockLinus Torvalds1-1/+16
Pull block fixes from Jens Axboe: "A smaller collection of fixes that should go into -rc1. This contains: - A fix from Christoph, fixing a regression with the WRITE_SAME and partial completions. Caused a BUG() on ppc. - Fixup for __blk_mq_stop_hw_queues(), it should be static. From Colin. - Removal of dmesg error messages on elevator switching, when invoked from sysfs. From me. - Fix for blk-stat, using this_cpu_ptr() in a section only protected by rcu_read_lock(). This breaks when PREEMPT_RCU is enabled. From me. - Two fixes for BFQ from Paolo, one fixing a crash and one updating the documentation. - An error handling lightnvm memory leak, from Rakesh. - The previous blk-mq hot unplug lock reversal depends on the CPU hotplug rework that isn't in mainline yet. This caused a lockdep splat when people unplugged CPUs with blk-mq devices. From Wanpeng. - A regression fix for DIF/DIX on blk-mq. From Wen" * 'for-linus' of git://git.kernel.dk/linux-block: block: handle partial completions for special payload requests blk-mq: NVMe 512B/4K+T10 DIF/DIX format returns I/O error on dd with split op blk-stat: don't use this_cpu_ptr() in a preemptable section elevator: remove redundant warnings on IO scheduler switch block, bfq: stress that low_latency must be off to get max throughput block, bfq: use pointer entity->sched_data only if set nvme: lightnvm: fix memory leak blk-mq: make __blk_mq_stop_hw_queues static lightnvm: remove unused rq parameter of nvme_nvm_rqtocmd() to kill warning block/mq: fix potential deadlock during cpu hotplug
2017-05-11doc: replace FTP URL to kernel.org with HTTPS oneMichael Heimpold1-1/+1
FTP services were shutdown some weeks ago, so the FTP URL does not work anymore. Fix this by replacing it with corresponding HTTPS URL. Signed-off-by: Michael Heimpold <michael.heimpold@i2se.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2017-05-11Merge tag 'for-linus-20170510' of git://git.infradead.org/linux-mtdLinus Torvalds4-7/+154
Pull MTD updates from Brian Norris: "NAND, from Boris: - some minor fixes/improvements on existing drivers (fsmc, gpio, ifc, davinci, brcmnand, omap) - a huge cleanup/rework of the denali driver accompanied with core fixes/improvements to simplify the driver code - a complete rewrite of the atmel driver to support new DT bindings make future evolution easier - the addition of per-vendor detection/initialization steps to avoid extending the nand_ids table with more extended-id entries SPI NOR, from Cyrille: - fixes in the hisi, intel and Mediatek SPI controller drivers - fixes to some SPI flash memories not supporting the Chip Erase command. - add support to some new memory parts (Winbond, Macronix, Micron, ESMT). - add new driver for the STM32 QSPI controller And a few fixes for Gemini and Versatile platforms on physmap-of" * tag 'for-linus-20170510' of git://git.infradead.org/linux-mtd: (100 commits) MAINTAINERS: Update NAND subsystem git repositories mtd: nand: gpio: update binding mtd: nand: add ooblayout for old hamming layout mtd: oxnas_nand: Allocating more than necessary in probe() dt-bindings: mtd: Document the STM32 QSPI bindings mtd: mtk-nor: set controller's address width according to nor flash mtd: spi-nor: add driver for STM32 quad spi flash controller mtd: nand: brcmnand: Check flash #WP pin status before nand erase/program mtd: nand: davinci: add comment on NAND subpage write status on keystone mtd: nand: omap2: Fix partition creation via cmdline mtdparts mtd: nand: NULL terminate a of_device_id table mtd: nand: Fix a couple error codes mtd: nand: allow drivers to request minimum alignment for passed buffer mtd: nand: allocate aligned buffers if NAND_OWN_BUFFERS is unset mtd: nand: denali: allow to override revision number mtd: nand: denali_dt: use pdev instead of ofdev for platform_device mtd: nand: denali_dt: remove dma-mask DT property mtd: nand: denali: support 64bit capable DMA engine mtd: nand: denali_dt: enable HW_ECC_FIXUP for Altera SOCFPGA variant mtd: nand: denali: support HW_ECC_FIXUP capability ...
2017-05-10Merge tag 'kbuild-uapi-v4.12' of ↵Linus Torvalds1-43/+31
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild UAPI updates from Masahiro Yamada: "Improvement of headers_install by Nicolas Dichtel. It has been long since the introduction of uapi directories, but the de-coupling of exported headers has not been completed. Headers listed in header-y are exported whether they exist in uapi directories or not. His work fixes this inconsistency. All (and only) headers under uapi directories are now exported. The asm-generic wrappers are still exceptions, but this is a big step forward" * tag 'kbuild-uapi-v4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: arch/include: remove empty Kbuild files uapi: export all arch specifics directories uapi: export all headers under uapi directories smc_diag.h: fix include from userland btrfs_tree.h: fix include from userland uapi: includes linux/types.h before exporting files Makefile.headersinst: remove destination-y option Makefile.headersinst: cleanup input files x86: stop exporting msr-index.h to userland nios2: put setup.h in uapi h8300: put bitsperlong.h in uapi
2017-05-10Merge tag 'rtc-4.12' of ↵Linus Torvalds4-0/+48
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux Pull RTC updates from Alexandre Belloni: "RTC subsystem update: - Add OF device ID table for i2c drivers New RTC driver: - Motorola CPCAP PMIC RTC RTC driver updates: - cmos: fix IRQ selection - ds1307: Add ST m41t0 support - ds1374: fix watchdog configuration - sh: Add rza series support" * tag 'rtc-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (33 commits) rtc: gemini: add return value validation rtc: snvs: fix an incorrect check of return value rtc: ds1374: wdt: Fix stop/start ioctl always returning -EINVAL rtc: ds1374: wdt: Fix issue with timeout scaling from secs to wdt ticks rtc: sh: mark PM functions as unused rtc: hid-sensor-time: remove some dead code rtc: m41t80: Add proper compatible for rv4162 rtc: ds1307: Add m41t0 to OF device ID table rtc: ds1307: support m41t0 variant rtc: cpcap: fix improper use of IRQ_NONE for request_threaded_irq rtc: cmos: Do not assume irq 8 for rtc when there are no legacy irqs x86: i8259: export legacy_pic symbol dt-bindings: rtc: document the rtc-sh bindings rtc: sh: add support for rza series rtc: cpcap: kfreeing devm allocated memory rtc: wm8350: Remove unused to_wm8350_from_rtc_dev rtc: cpcap: new rtc driver dt-bindings: Add vendor prefix for Motorola rtc: omap: mark PM methods as __maybe_unused rtc: omap: remove incorrect __exit markups ...
2017-05-10mtd: nand: gpio: update bindingChristophe Leroy1-2/+2
This patch updates the binding documentation in accordance with commit 44dd182861f99 ("mtd: nand: gpio: make nCE GPIO optional") Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Reported-by: Brian Norris <computersforpeace@gmail.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2017-05-10Merge tag 'clk-for-linus' of ↵Linus Torvalds10-11/+44
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "Sort of on the quieter side this time, which is probably due more to me not catching up as quickly on patch review than anything else. Overall it seems normal though, a few small changes to the core, mostly small non-critical fixes here and there as well as driver updates for new and existing hardware support. The biggest things are the TI clk driver rework to lay the groundwork for clkctrl support in the next merge window and the AmLogic audio/graphics clk support. Core: - clk_possible_parents debugfs file so we know which parents a clk could possibly have - Fix to make clk rate change notifiers stop on the first failure instead of continuing New Drivers: - Mediatek MT6797 SoCs - hi655x PMIC clks - AmLogic Meson SoC i2s and spdif audio clks and Mali graphics clks - Allwinner H5 SoCs and PRCM hardware Updates: - Nvidia Tegra T210 cleanups and non-critical fixes - TI OMAP cleanups in preparation for clkctrl support - trivial fixes like kcalloc(), devm_* conversions, and seq_puts() - ZTE zx296718 SoC VGA clks - Rockchip clk-ids, fixups, and rename of rk1108 to rv1108 - IDT VersaClock 5P49V5935 support - Renesas R-Car H3 and M3-W IMR clks and ES2.0 rev of R-Car H3 support" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (151 commits) clk: x86: pmc-atom: Checking for IS_ERR() instead of NULL clk: ti: divider: try to fix ti_clk_register_divider clk: mvebu: Use kcalloc() in two functions clk: mvebu: Use kcalloc() in of_cpu_clk_setup() clk: nomadik: Delete error messages for a failed memory allocation in two functions clk: nomadik: Use seq_puts() in nomadik_src_clk_show() clk: Improve a size determination in two functions clk: Replace four seq_printf() calls by seq_putc() clk: si5351: Delete an error message for a failed memory allocation in si5351_i2c_probe() clk: si5351: Use devm_kcalloc() in si5351_i2c_probe() clk: at91: Use kcalloc() in of_at91_clk_pll_get_characteristics() reset: mediatek: Add MT2701 ethsys reset controller include file clk: mediatek: add mt2701 ethernet reset clk: hi6220: Add the hi655x's pmic clock clk: ti: fix building without legacy omap3 clk: ti: fix linker error with !SOC_OMAP4 clk: hi3620: Fix a typo in one variable name clk: hi3620: Delete error messages for a failed memory allocation in two functions clk: hi3620: Use kcalloc() in hi3620_mmc_clk_init() clk: hisilicon: Delete error messages for failed memory allocations in hisi_clk_init() ...
2017-05-10Merge tag 'nfs-for-4.12-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds2-43/+0
Pull NFS client updates from Trond Myklebust: "Highlights include: Stable bugfixes: - Fix use after free in write error path - Use GFP_NOIO for two allocations in writeback - Fix a hang in OPEN related to server reboot - Check the result of nfs4_pnfs_ds_connect - Fix an rcu lock leak Features: - Removal of the unmaintained and unused OSD pNFS layout - Cleanup and removal of lots of unnecessary dprintk()s - Cleanup and removal of some memory failure paths now that GFP_NOFS is guaranteed to never fail. - Remove the v3-only data server limitation on pNFS/flexfiles Bugfixes: - RPC/RDMA connection handling bugfixes - Copy offload: fixes to ensure the copied data is COMMITed to disk. - Readdir: switch back to using the ->iterate VFS interface - File locking fixes from Ben Coddington - Various use-after-free and deadlock issues in pNFS - Write path bugfixes" * tag 'nfs-for-4.12-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (89 commits) pNFS/flexfiles: Always attempt to call layoutstats when flexfiles is enabled NFSv4.1: Work around a Linux server bug... NFS append COMMIT after synchronous COPY NFSv4: Fix exclusive create attributes encoding NFSv4: Fix an rcu lock leak nfs: use kmap/kunmap directly NFS: always treat the invocation of nfs_getattr as cache hit when noac is on Fix nfs_client refcounting if kmalloc fails in nfs4_proc_exchange_id and nfs4_proc_async_renew NFSv4.1: RECLAIM_COMPLETE must handle NFS4ERR_CONN_NOT_BOUND_TO_SESSION pNFS: Fix NULL dereference in pnfs_generic_alloc_ds_commits pNFS: Fix a typo in pnfs_generic_alloc_ds_commits pNFS: Fix a deadlock when coalescing writes and returning the layout pNFS: Don't clear the layout return info if there are segments to return pNFS: Ensure we commit the layout if it has been invalidated pNFS: Don't send COMMITs to the DSes if the server invalidated our layout pNFS/flexfiles: Fix up the ff_layout_write_pagelist failure path pNFS: Ensure we check layout validity before marking it for return NFS4.1 handle interrupted slot reuse from ERR_DELAY NFSv4: check return value of xdr_inline_decode nfs/filelayout: fix NULL pointer dereference in fl_pnfs_update_layout() ...
2017-05-10Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds2-0/+127
Pull more KVM updates from Paolo Bonzini: "ARM: - bugfixes - moved shared 32-bit/64-bit files to virt/kvm/arm - support for saving/restoring virtual ITS state to userspace PPC: - XIVE (eXternal Interrupt Virtualization Engine) support x86: - nVMX improvements, including emulated page modification logging (PML) which brings nice performance improvements on some workloads" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (45 commits) KVM: arm/arm64: vgic-its: Cleanup after failed ITT restore KVM: arm/arm64: Don't call map_resources when restoring ITS tables KVM: arm/arm64: Register ITS iodev when setting base address KVM: arm/arm64: Get rid of its->initialized field KVM: arm/arm64: Register iodevs when setting redist base and creating VCPUs KVM: arm/arm64: Slightly rework kvm_vgic_addr KVM: arm/arm64: Make vgic_v3_check_base more broadly usable KVM: arm/arm64: Refactor vgic_register_redist_iodevs KVM: Add kvm_vcpu_get_idx to get vcpu index in kvm->vcpus nVMX: Advertise PML to L1 hypervisor nVMX: Implement emulated Page Modification Logging kvm: x86: Add a hook for arch specific dirty logging emulation kvm: nVMX: Validate CR3 target count on nested VM-entry KVM: set no_llseek in stat_fops_per_vm KVM: arm/arm64: vgic: Rename kvm_vgic_vcpu_init to kvm_vgic_vcpu_enable KVM: arm/arm64: Clarification and relaxation to ITS save/restore ABI KVM: arm64: vgic-v3: KVM_DEV_ARM_VGIC_SAVE_PENDING_TABLES KVM: arm64: vgic-its: Fix pending table sync KVM: arm64: vgic-its: ITT save and restore KVM: arm64: vgic-its: Device table save/restore ...
2017-05-10Merge tag 'armsoc-tee' of ↵Linus Torvalds5-0/+153
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull TEE driver infrastructure and OP-TEE drivers from Arnd Bergmann: "This introduces a generic TEE framework in the kernel, to handle trusted environemtns (security coprocessor or software implementations such as OP-TEE/TrustZone). I'm sending it separately from the other arm-soc driver changes to give it a little more visibility, once the subsystem is merged, we will likely keep this in the arm₋soc drivers branch or have the maintainers submit pull requests directly, depending on the patch volume. I have reviewed earlier versions in the past, and have reviewed the latest version in person during Linaro Connect BUD17. Here is my overall assessment of the subsystem: - There is clearly demand for this, both for the generic infrastructure and the specific OP-TEE implementation. - The code has gone through a large number of reviews, and the review comments have all been addressed, but the reviews were not coming up with serious issues any more and nobody volunteered to vouch for the quality. - The user space ioctl interface is sufficient to work with the OP-TEE driver, and it should in principle work with other TEE implementations that follow the GlobalPlatform[1] standards, but it might need to be extended in minor ways depending on specific requirements of future TEE implementations - The main downside of the API to me is how the user space is tied to the TEE implementation in hardware or firmware, but uses a generic way to communicate with it. This seems to be an inherent problem with what it is trying to do, and I could not come up with any better solution than what is implemented here. For a detailed history of the patch series, see https://lkml.org/lkml/2017/3/10/1277" * tag 'armsoc-tee' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: arm64: dt: hikey: Add optee node Documentation: tee subsystem and op-tee driver tee: add OP-TEE driver tee: generic TEE subsystem dt/bindings: add bindings for optee
2017-05-10Merge branch 'core-rcu-for-linus' of ↵Linus Torvalds11-255/+503
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull RCU updates from Ingo Molnar: "The main changes are: - Debloat RCU headers - Parallelize SRCU callback handling (plus overlapping patches) - Improve the performance of Tree SRCU on a CPU-hotplug stress test - Documentation updates - Miscellaneous fixes" * 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (74 commits) rcu: Open-code the rcu_cblist_n_lazy_cbs() function rcu: Open-code the rcu_cblist_n_cbs() function rcu: Open-code the rcu_cblist_empty() function rcu: Separately compile large rcu_segcblist functions srcu: Debloat the <linux/rcu_segcblist.h> header srcu: Adjust default auto-expediting holdoff srcu: Specify auto-expedite holdoff time srcu: Expedite first synchronize_srcu() when idle srcu: Expedited grace periods with reduced memory contention srcu: Make rcutorture writer stalls print SRCU GP state srcu: Exact tracking of srcu_data structures containing callbacks srcu: Make SRCU be built by default srcu: Fix Kconfig botch when SRCU not selected rcu: Make non-preemptive schedule be Tasks RCU quiescent state srcu: Expedite srcu_schedule_cbs_snp() callback invocation srcu: Parallelize callback handling kvm: Move srcu_struct fields to end of struct kvm rcu: Fix typo in PER_RCU_NODE_PERIOD header comment rcu: Use true/false in assignment to bool rcu: Use bool value directly ...
2017-05-10Merge tag 'pm-extra-4.12-rc1' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull more power management updates from Rafael Wysocki: "These add new CPU IDs to a couple of drivers, fix a possible NULL pointer dereference in the cpuidle core, update DT-related things in the generic power domains framework and finally update the suspend/resume infrastructure to improve the handling of wakeups from suspend-to-idle. Specifics: - Add Intel Gemini Lake CPU IDs to the intel_idle and intel_rapl drivers (David Box). - Add a NULL pointer check to the cpuidle core to prevent it from crashing on platforms with incomplete cpuidle configuration (Fei Li). - Fix DT-related documentation in the generic power domains (genpd) framework and add a MAINTAINERS entry for DT-related material in genpd (Viresh Kumar). - Update the system suspend/resume infrastructure to improve the handling of aborts of suspend transitions in progress in the wakeup framework and rework the suspend-to-idle core loop to make it possible to filter out spurious wakeup events (specifically the ones coming from ACPI) without resuming all the way up to user space every time (Rafael Wysocki)" * tag 'pm-extra-4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI / sleep: Ignore spurious SCI wakeups from suspend-to-idle PM / wakeup: Integrate mechanism to abort transitions in progress x86/intel_idle: add Gemini Lake support cpuidle: check dev before usage in cpuidle_use_deepest_state() powercap: intel_rapl: Add support for Gemini Lake PM / Domains: Add DT file to MAINTAINERS PM / Domains: Fix DT example
2017-05-10Merge branch 'overlayfs-linus' of ↵Linus Torvalds1-1/+8
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs Pull overlayfs update from Miklos Szeredi: "The biggest part of this is making st_dev/st_ino on the overlay behave like a normal filesystem (i.e. st_ino doesn't change on copy up, st_dev is the same for all files and directories). Currently this only works if all layers are on the same filesystem, but future work will move the general case towards more sane behavior. There are also miscellaneous fixes, including fixes to handling append-only files. There's a small change in the VFS, but that only has an effect on overlayfs, since otherwise file->f_path.dentry->inode and file_inode(file) are always the same" * 'overlayfs-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs: ovl: update documentation w.r.t. constant inode numbers ovl: persistent inode numbers for upper hardlinks ovl: merge getattr for dir and nondir ovl: constant st_ino/st_dev across copy up ovl: persistent inode number for directories ovl: set the ORIGIN type flag ovl: lookup non-dir copy-up-origin by file handle ovl: use an auxiliary var for overlay root entry ovl: store file handle of lower inode on copy up ovl: check if all layers are on the same fs ovl: do not set overlay.opaque on non-dir create ovl: check IS_APPEND() on real upper inode vfs: ftruncate check IS_APPEND() on real upper inode ovl: Use designated initializers ovl: lockdep annotate of nested stacked overlayfs inode lock
2017-05-11uapi: export all arch specifics directoriesNicolas Dichtel1-14/+1
This patch removes the need of subdir-y. Now all files/directories under arch/<arch>/include/uapi/ are exported. The only change for userland is the layout of the command 'make headers_install_all': directories asm-<arch> are replaced by arch-<arch>/. Those new directories contains all files/directories of the specified arch. Note that only cris and tile have more directories than only asm: - arch-v[10|32] for cris; - arch for tile. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-05-11uapi: export all headers under uapi directoriesNicolas Dichtel1-25/+41
Regularly, when a new header is created in include/uapi/, the developer forgets to add it in the corresponding Kbuild file. This error is usually detected after the release is out. In fact, all headers under uapi directories should be exported, thus it's useless to have an exhaustive list. After this patch, the following files, which were not exported, are now exported (with make headers_install_all): asm-arc/kvm_para.h asm-arc/ucontext.h asm-blackfin/shmparam.h asm-blackfin/ucontext.h asm-c6x/shmparam.h asm-c6x/ucontext.h asm-cris/kvm_para.h asm-h8300/shmparam.h asm-h8300/ucontext.h asm-hexagon/shmparam.h asm-m32r/kvm_para.h asm-m68k/kvm_para.h asm-m68k/shmparam.h asm-metag/kvm_para.h asm-metag/shmparam.h asm-metag/ucontext.h asm-mips/hwcap.h asm-mips/reg.h asm-mips/ucontext.h asm-nios2/kvm_para.h asm-nios2/ucontext.h asm-openrisc/shmparam.h asm-parisc/kvm_para.h asm-powerpc/perf_regs.h asm-sh/kvm_para.h asm-sh/ucontext.h asm-tile/shmparam.h asm-unicore32/shmparam.h asm-unicore32/ucontext.h asm-x86/hwcap2.h asm-xtensa/kvm_para.h drm/armada_drm.h drm/etnaviv_drm.h drm/vgem_drm.h linux/aspeed-lpc-ctrl.h linux/auto_dev-ioctl.h linux/bcache.h linux/btrfs_tree.h linux/can/vxcan.h linux/cifs/cifs_mount.h linux/coresight-stm.h linux/cryptouser.h linux/fsmap.h linux/genwqe/genwqe_card.h linux/hash_info.h linux/kcm.h linux/kcov.h linux/kfd_ioctl.h linux/lightnvm.h linux/module.h linux/nbd-netlink.h linux/nilfs2_api.h linux/nilfs2_ondisk.h linux/nsfs.h linux/pr.h linux/qrtr.h linux/rpmsg.h linux/sched/types.h linux/sed-opal.h linux/smc.h linux/smc_diag.h linux/stm.h linux/switchtec_ioctl.h linux/vfio_ccw.h linux/wil6210_uapi.h rdma/bnxt_re-abi.h Note that I have removed from this list the files which are generated in every exported directories (like .install or .install.cmd). Thanks to Julien Floret <julien.floret@6wind.com> for the tip to get all subdirs with a pure makefile command. For the record, note that exported files for asm directories are a mix of files listed by: - include/uapi/asm-generic/Kbuild.asm; - arch/<arch>/include/uapi/asm/Kbuild; - arch/<arch>/include/asm/Kbuild. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Russell King <rmk+kernel@armlinux.org.uk> Acked-by: Mark Salter <msalter@redhat.com> Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-05-11Makefile.headersinst: remove destination-y optionNicolas Dichtel1-19/+4
This option was added in commit c7bb349e7c25 ("kbuild: introduce destination-y for exported headers") but never used in-tree. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Acked-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-05-10block, bfq: stress that low_latency must be off to get max throughputPaolo Valente1-1/+16
The introduction of the BFQ and Kyber I/O schedulers has triggered a new wave of I/O benchmarks. Unfortunately, comments and discussions on these benchmarks confirm that there is still little awareness that it is very hard to achieve, at the same time, a low latency and a high throughput. In particular, virtually all benchmarks measure throughput, or throughput-related figures of merit, but, for BFQ, they use the scheduler in its default configuration. This configuration is geared, instead, toward a low latency. This is evidently a sign that BFQ documentation is still too unclear on this important aspect. This commit addresses this issue by stressing how BFQ configuration must be (easily) changed if the only goal is maximum throughput. Signed-off-by: Paolo Valente <paolo.valente@linaro.org> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-05-09Merge tag 'dmaengine-4.12-rc1' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds1-1/+40
Pull dmaengine updates from Vinod Koul: "This time again a smaller update consisting of: - support for TI DA8xx dma controller and updates to the cppi driver - updates on bunch of drivers like xilinx, pl08x, stm32-dma, mv_xor, ioat, dmatest" * tag 'dmaengine-4.12-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (35 commits) dmaengine: pl08x: remove lock documentation dmaengine: pl08x: fix pl08x_dma_chan_state documentation dmaengine: pl08x: Use the BIT() macro consistently dmaengine: pl080: Fix some missing kerneldoc dmaengine: pl080: Cut some unused defines dmaengine: dmatest: Add check for supported buffer count (sg_buffers) dmaengine: dmatest: Select DMA_ENGINE_RAID as its needed for the slave_sg test dmaengine: virt-dma: Convert to use list_for_each_entry_safe() dma-debug: use offset_in_page() macro dmaengine: mv_xor: use offset_in_page() macro dmaengine: dmatest: use offset_in_page() macro dmaengine: sun4i: fix invalid argument dmaengine: ioat: use setup_timer dmaengine: cppi41: Fix an Oops happening in cppi41_dma_probe() dmaengine: pl330: remove pdata based initialization dmaengine: cppi: fix build error due to bad variable dmaengine: imx-sdma: add 1ms delay to ensure SDMA channel is stopped dmaengine: cppi41: use managed functions devm_*() dmaengine: cppi41: fix cppi41_dma_tx_status() logic dmaengine: qcom_hidma: pause the channel on shutdown ...
2017-05-09Merge tag 'pwm/for-4.12-rc1' of ↵Linus Torvalds3-0/+80
git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm Pull pwm updates from Thierry Reding: "Adds a new driver for the PWM controller found on MediaTek SoCs and extends support for the Atmel PWM controller to include the SAMA5D2. Some existing drivers have been migrated to the atomic API and a few others see miscellaneous improvements" * tag 'pwm/for-4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: pwm: tegra: Read PWM clock source rate in driver init pwm: pca9685: Fix GPIO-only operation pwm: mediatek: Don't explicitly set .owner pwm: tegra: Avoid potential overflow for short periods pwm: tegra: Add support to configure pin state in suspends/resume pwm: tegra: Add DT binding details to configure pin in suspends/resume pwm: tegra: Increase precision in PWM rate calculation pwm: tegra: Use DIV_ROUND_CLOSEST_ULL() instead of local implementation pwm: Add MediaTek PWM support dt-bindings: pwm: Add MediaTek PWM bindings pwm: atmel: Enable PWM on sama5d2 pwm: atmel: Switch to atomic PWM pwm: atmel-hlcdc: Implement the suspend/resume hooks pwm: atmel-hlcdc: Convert to the atomic PWM API