summaryrefslogtreecommitdiff
path: root/Documentation/devicetree/bindings/pinctrl
AgeCommit message (Collapse)AuthorFilesLines
2018-04-16dt-bindings: pinctrl: sunxi: Fix reference to driverMatheus Castello1-3/+3
Bindings describe hardware, not drivers. Use reference to hardware Allwinner A1X Pin Controller instead driver. Signed-off-by: Matheus Castello <matheus@castello.eng.br> Signed-off-by: Rob Herring <robh@kernel.org>
2018-04-05Merge tag 'armsoc-dt' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC device tree updates from Arnd Bergmann: "This is the usual set of changes for device trees, with over 700 non-merged changesets. There is an ongoing set of dtc warning fixes and the usual bugfixes, cleanups and added device support. The most interesting bit as usual is support for new machines listed below: - The Allwinner H6 makes its debut with the Pine-H64 board, and we get two new machines based on its older siblings: the H5 based OrangePi Zero+ and the A64 based Teres-I Laptop from Olimex. On the 32-bit side, we add The Olimex som204 based on Allwinner A20, and the Banana Pi M2 Zero development board (based on H2). - NVIDIA adds support for Tegra194 aka "Xavier", plus their p2972 development board and p2888 CPU module. - The Nuvoton npcm750 is a BMC that was newly added, for now we only support running on the evaluation board. - STmicroelectronics stm32 gains support for the stm32mp157c and two evaluation boards. - The Toradex Colibri board family grows a few members based on the i.MX6ULL variant. - The Advantec DMS-BA16 is a Qseven module using the NXP i.MX6 family of chips. - The Phytec phyBOARD Mira is a family of industrial boards based on i.MX6. For now, four models get added. - TI am335x based PDU-001 is an industrial embedded machine used for traffic monitoring - The Aspeed platform now supports running on the BMC on the Qualcomm Centriq 2400 server - Samsung Exynos4 based Galaxy S3 is a family of mobile phones Qualcomm msm8974 based Galaxy S5 is a rather different phone made by the same company. - The Xilinx Zynq and ZynqMP platforms now gained a lot of dts file for the various boards made by Xilinx themselves, as well as the Digilent Zybo Z7. - The ARM Versatile family now supports the "IB2" interface board. - The Renesas H2 based "Stout" and the H3 based Salvator-X are more evaluation boards named after a kind of beer, as most of them are. The r8a77980 (V3H) based "Condor" apparently doesn't follow that tradition. ;-) - ROC-RK3328-CC is a simple developement board from the Libre Computer Project, based on the Rockchips RK3328 SoC - Haiku is another development board plus Qseven module based on Rockchips RK3368 and made by Theobroma Systems" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (701 commits) arm: dts: modify Nuvoton NPCM7xx device tree structure arm: dts: modify Makefile NPCM750 configuration name arm: dts: modify clock binding in NPCM750 device tree arm: dts: modify timer register size in NPCM750 device tree arm: dts: modify UART compatible name in NPCM750 device tree arm: dts: add watchdog device to NPCM750 device tree arm64: dts: uniphier: add ethernet node for PXs3 ARM: dts: uniphier: add pinctrl groups of ethernet for second instance arm: dts: kirkwood*.dts: use SPDX-License-Identifier for board using GPL-2.0+ arm: dts: kirkwood*.dts: use SPDX-License-Identifier for boards using GPL-2.0+/MIT arm: dts: kirkwood*.dts: use SPDX-License-Identifier for boards using GPL-2.0 arm: dts: armada-385-turris-omnia: use SPDX-License-Identifier arm: dts: armada-385-db-ap: use SPDX-License-Identifier arm: dts: armada-388-rd: use SPDX-License-Identifier arm: dts: armada-xp-db-xc3-24g4xg: use SPDX-License-Identifier arm: dts: armada-xp-db-dxbc2: use SPDX-License-Identifier arm: dts: armada-370-db: use SPDX-License-Identifier arm: dts: armada-*.dts: use SPDX-License-Identifier for most of the Armada based board arm: dts: armada-xp-98dx: use SPDX-License-Identifier for prestara 98d SoCs arm: dts: armada-*.dtsi: use SPDX-License-Identifier for most of the Armada SoCs ...
2018-03-27pinctrl: sunxi: add support for the Allwinner H6 main pin controllerIcenowy Zheng1-0/+1
The Allwinner H6 SoC has two pin controllers, one main controller (called CPUX-PORT in user manual) and one controller in CPUs power domain (called CPUS-PORT in user manual). This commit introduces support for the main pin controller on H6. The pin bank A and B are not wired out and hidden from the SoC's documents, however it's shown that the "ATE" (an AC200 chip co-packaged with the H6 die) is connected to the main SoC die via these pin banks. The information about these banks is just copied from the BSP pinctrl driver, but re-formatted to fit the mainline pinctrl driver format. The GPIO functions are dropped, as they're impossible to use -- except a GPIO&IRQ only pin (PB20) which might be the IRQ of ATE. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-03-23dt-bindings: imx: update pinctrl doc for imx6sllBai Ping1-0/+40
Add pinctrl binding doc update for imx6sll. Signed-off-by: Bai Ping <ping.bai@nxp.com> Acked-by: Shawn Guo <shawnguo@kernel.org> Acked-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-03-23Merge tag 'sh-pfc-for-v4.17-tag2' of ↵Linus Walleij1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into devel pinctrl: sh-pfc: Updates for v4.17 (take two) - Add USB pin groups on R-Car M3-N, - Add support for the new R-Car V3H SoC, - Add EtherAVB pin groups on R-Car V3M, - Miscellaneous fixes and cleanups.
2018-03-09pinctrl: sh-pfc: Add R8A77980 PFC supportSergei Shtylyov1-0/+1
Add the PFC support for the R8A77980 SoC including pin groups for some on-chip devices such as AVB, CAN-FD, GETHER, [H]SCIF, I2C, INTC-EX, MMC, MSIOF, PWM, and VIN... Based on the original (and large) patch by Vladimir Barinov. Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2018-03-02dt-bindings: pinctrl: Add bindings for Actions S900 SoCManivannan Sadhasivam1-0/+178
Add pinctrl bindings for Actions Semi S900 SoC Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-03-02Merge tag 'sh-pfc-for-v4.17-tag1' of ↵Linus Walleij1-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into devel pinctrl: sh-pfc: Updates for v4.17 - Add DU and VIN pin groups on R-Car D3, - Add HDMI, TMU, and VIN pin groups on R-Car H3 and M3-W, - Add support for the new R-Car M3-N SoC, - Small fixes and cleanups.
2018-03-02dt-bindings: pinctrl: mediatek: use - instead of _ in examplesSean Wang1-2/+2
It should be good that no use "_" is in examples. Consequently, those nodes in certain files which have an inappropriate name containing "_" are all being replaced with "-". Signed-off-by: Sean Wang <sean.wang@mediatek.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: linux-gpio@vger.kernel.org Cc: devicetree@vger.kernel.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-03-02pinctrl: artpec6: dt: add smaller groups for uartsNiklas Cassel1-7/+8
Add group configuration for uarts that are cut down variants, the standard being full, i.e. all signals, flow control, i.e. rx/tx and cts/rts, and rx/tx only. This allows us to be more precise in which pins we're actually using. Unfortunately the existing naming scheme leaves things to be desired, e.g. uart3grp0 means RX/TX and CTS/RTS, yet uart0grp0 means all pins. Since the exising suffixes have different meaning for different uarts, and the fact that we cannot change the name of existing groups, makes it hard to use a descriptive name for the newly added groups. Signed-off-by: Niklas Cassel <niklas.cassel@axis.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-03-02pinctrl: artpec6: dt: add missing pin group uart5noctsNiklas Cassel1-2/+3
Add missing pin group uart5nocts (all pins except cts), which has been supported by the artpec6 pinctrl driver since its initial submission. Fixes: 00df0582eab1 ("pinctrl: Add pincontrol driver for ARTPEC-6 SoC") Signed-off-by: Niklas Cassel <niklas.cassel@axis.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-03-01pinctrl: Drop TZ1090 driversJames Hogan2-354/+0
Now that arch/metag/ has been removed, along with TZ1090 SoC support, remove the TZ1090 pinctrl drivers. They are of no value without the architecture and SoC platform code. Signed-off-by: James Hogan <jhogan@kernel.org> Cc: linux-gpio@vger.kernel.org Cc: linux-metag@vger.kernel.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-02-22dt-bindings: pinctrl: mcp23s08: add documentation for drive-open-drainPhil Reid1-0/+2
This flag set the mcp23s08 device irq type to open drain active low. Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Phil Reid <preid@electromag.com.au> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-02-20pinctrl: sh-pfc: Initial R-Car M3-N supportJacopo Mondi1-0/+1
Add initial PFC support for R-Car M3-N (r8a77965) SoC. No groups or functions defined, just pin and registers enumeration. Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2018-02-16dt-bindings: pinctrl: Add st,stm32f769-pinctrl compatible to stm32-pinctrlAlexandre Torgue1-0/+1
Add new compatible for stm32f769 MCU. Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com> Reviewed-by: Rob Herring <robh@kernel.org>
2018-02-12dt-bindings: pinctrl: sh-pfc: Correct SoC family name for R8A7778Geert Uytterhoeven1-1/+1
R8A7778 is R-Car (not R-Mobile) M1. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Simon Horman <horms+renesas@verge.net.au>
2018-02-12dt-bindings: pinctrl: Add Qualcomm SDM845 TLMM bindingBjorn Andersson1-0/+176
This adds the DeviceTree binding for the Qualcomm SDM845 TLMM block. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-02-02Merge tag 'pinctrl-v4.16-1' of ↵Linus Torvalds8-1/+618
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "This is the bulk of pin control changes for the v4.16 kernel cycle. Like with GPIO it is actually a bit calm this time. Core changes: - After lengthy discussions and partly due to my ignorance, we have merged a patch making pinctrl_force_default() and pinctrl_force_sleep() reprogram the states into the hardware of any hogged pins, even if they are already in the desired state. This only apply to hogged pins since groups of pins owned by drivers need to be managed by each driver, lest they could not do things like runtime PM and put pins to sleeping state even if the system as a whole is not in sleep. New drivers: - New driver for the Microsemi Ocelot SoC. This is used in ethernet switches. - The X-Powers AXP209 GPIO driver was extended to also deal with pin control and moved over from the GPIO subsystem. This circuit is a mixed-mode integrated circuit which is part of AllWinner designs. - New subdriver for the Qualcomm MSM8998 SoC, core of a high end mobile devices (phones) chipset. - New subdriver for the ST Microelectronics STM32MP157 MPU and STM32F769 MCU from the STM32 family. - New subdriver for the MediaTek MT7622 SoC. This is used for routers, repeater, gateways and such network infrastructure. - New subdriver for the NXP (former Freescale) i.MX 6ULL. This SoC has multimedia features and target "smart devices", I guess in-car entertainment, in-flight entertainment, industrial control panels etc. General improvements: - Incremental improvements on the SH-PFC subdrivers for things like the CAN bus. - Enable the glitch filter on Baytrail GPIOs used for interrupts. - Proper handling of pins to GPIO ranges on the Semtec SX150X - An IRQ setup ordering fix on MCP23S08. - A good set of janitorial coding style fixes" * tag 'pinctrl-v4.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (102 commits) pinctrl: mcp23s08: fix irq setup order pinctrl: Forward declare struct device pinctrl: sunxi: Use of_clk_get_parent_count() instead of open coding pinctrl: stm32: add STM32F769 MCU support pinctrl: sx150x: Add a static gpio/pinctrl pin range mapping pinctrl: sx150x: Register pinctrl before adding the gpiochip pinctrl: sx150x: Unregister the pinctrl on release pinctrl: ingenic: Remove redundant dev_err call in ingenic_pinctrl_probe() pinctrl: sprd: Use seq_putc() in sprd_pinconf_group_dbg_show() pinctrl: pinmux: Use seq_putc() in pinmux_pins_show() pinctrl: abx500: Use seq_putc() in abx500_gpio_dbg_show() pinctrl: mediatek: mt7622: align error handling of mtk_hw_get_value call pinctrl: mediatek: mt7622: fix potential uninitialized value being returned pinctrl: uniphier: refactor drive strength get/set functions pinctrl: imx7ulp: constify struct imx_cfg_params_decode pinctrl: imx: constify struct imx_pinctrl_soc_info pinctrl: imx7d: simplify imx7d_pinctrl_probe pinctrl: imx: use struct imx_pinctrl_soc_info as a const pinctrl: sunxi-pinctrl: fix pin funtion can not be match correctly. pinctrl: qcom: Add msm8998 pinctrl driver ...
2018-02-01Merge tag 'armsoc-dt' of ↵Linus Torvalds1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC device tree updates from Arnd Bergmann: "We get a moderate number of new machines this time, and only one new SoC variant (Actions S700): Actions: - S700 Soc and CubieBoard7 development board - Allo.com Sparky Single-board-computer Allwinner: - Orange Pi R1 development board - Libre Computer Board ALL-H3-CC H3 single-board computer ASpeed ast2x00: - Witherspoon: OpenPower Power9 server manufactured by IBM that uses the ASPEED ast2500 - Zaius: OpenPower Power9 server manufactured by Invatech that uses the ASPEED ast2500 - Q71L: Intel Xeon server manufactured by Qanta that uses the ASPEED ast2400 AT91: - Axentia Nattis/Natte digital signage - sama5d2 PTC-ek Evaluation board Freescale/NXP i.MX: - SolidRun Humminboard2 development board - Variscite DART-MX6 SoM and Carrier-board - Technologic TS-4600 and TS-7970 development board - Toradex Colibri iMX7D SoM board - v1.5 variant of Solidrun Cubox-i and Hummingboard Freescale/NXP Layerscape: - Moxa UC-8410A Series industrial computer Gemini: - D-Link DNS-313 NAS enclosure OMAP: - LogicPD OMAP35xx SOM-LV devkit - LogicPD OMAP35xx Torpedo devkit Renesas: - r8a77970 (V3M) Starter Kit board - r8a7795 (M3-W) Salvator-XS board We finally managed to get the dtc warnings under control, with no more build-time warnings for bad device tree files. This includes fixes for the majority of platforms, including nomadik, samsung, lpc32xx, STi, spear, mediatek, freescale, qcom, realview, keystone, omap, kirkwood, renesas, hisilicon, and broadcom. Files get rearranged on a few platforms, in particular the Marvell Armada 7K/8K device tree files are changed in preparation for future SoC support, based on more than two of the same chips in one package, and some boards get renamed for oxnas for consistency. Finally, many existing SoCs gain descriptions for additional on-chip devices that we can now support with kernel drivers: - Allwinner A83t (drm, ethernet, i2c, ...), H3/H5 (USB-OTG) - Amlogic AXG family (clk, pinctrl, pwm, ...), and others (vpu, hdmi) - Aspeed clk controller support - Freescale LS1088A, LS1021A device support - Gemini Ethernet, PCI, TVE, panel - Keystone gpio, qspi, more uarts - Mediatek cpufreq, regulator, clock, reset - Marvell thermal, cpufreq, nand - Renesas SMP, thermal, timer, PWM, sound, phy, ipmmu - Rockchip Mipi, GPU, display - Samsung Exynos5433 PMU, power domain, nfc - Spreadtrum: sc9860 clocks - Tegra TX2 PSDI, HDMI, I2C,SMMU, display, fuse, ..." * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (690 commits) arm64: dts: stratix10: fix SPI settings ARM: dts: socfpga: add i2c reset signals arm64: dts: stratix10: add USB ECC reset bit arm64: dts: stratix10: enable USB on the devkit ARM: dts: socfpga: disable over-current for Arria10 USB devkit ARM: dts: Nokia N9: add support for up/down keys in the dts ARM: dts: nomadik: add interrupt-parent for clcd ARM: dts: Add ethernet to a bunch of platforms ARM: dts: Add ethernet to the Gemini SoC ARM: dts: rename oxnas dts files ARM: dts: s5pv210: add interrupt-parent for ohci ARM: lpc3250: fix uda1380 gpio numbers ARM: dts: STi: Add gpio polarity for "hdmi,hpd-gpio" property ARM: dts: dra7: Reduce shut down temperature of non-cpu thermal zones ARM: dts: n900: Add aliases for lcd and tvout displays ARM: dts: Update ti-sysc data for existing users ARM: dts: Fix smartreflex compatible for omap3 shared mpu-iva instance arm64: dts: marvell: armada-80x0: Fix pinctrl compatible string arm: spear13xx: Fix spics gpio controller's warning arm: spear13xx: Fix dmas cells ...
2018-01-09pinctrl: qcom: Add msm8998 pinctrl driverKhan, Imran1-0/+193
Add initial pinctrl driver to support pin configuration with pinctrl framework for msm8998. Signed-off-by: Imran Khan <kimran@codeaurora.org> Acked-by: Rob Herring <robh@kernel.org> [bjorn: Consolidated function groups] Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-01-09pinctrl: imx6ul: add IOMUXC SNVS pinctrl driver for i.MX 6ULLBai Ping1-1/+2
On i.MX 6ULL, the BOOT_MODEx and TAMPERx pin MUX and CTRL registers are available in a separate IOMUXC_SNVS module. Add support for the IOMUXC_SNVS module to the i.MX 6UL pinctrl driver. Signed-off-by: Bai Ping <ping.bai@nxp.com> Signed-off-by: Stefan Agner <stefan@agner.ch> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-01-05Merge tag 'amlogic-dt64-2' of ↵Arnd Bergmann1-0/+2
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into next/dt Pull "Amlogic 64-bit DT updates for v4.16, round 2" from Kevin Hilman: This adds a few more basics (clock, pinctrl, PWM, reset) for the new AXG family of Amlogic SoCs. * tag 'amlogic-dt64-2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: arm64: dts: meson-axg: add new reset DT node ARM64: dts: meson-axg: add PWM DT info for Meson-Axg SoC ARM64: dts: meson-axg: add pinctrl DT info for Meson-AXG SoC documentation: Add compatibles for Amlogic Meson AXG pin controllers arm64: dts: meson-axg: add clock DT info for Meson AXG SoC
2017-12-26dt-bindings: Use lower case hex in unit-addressesRob Herring4-6/+6
DT unit addresses should be lower case hex. Fix all the binding examples. Converted with the following command from Krzysztof Kozlowski: sed -e 's/@\([a-fA-F0-9_-]*\) {/@\L\1 {/' -i $(find Documentation/devicetree/bindings -name '*.txt') Signed-off-by: Rob Herring <robh@kernel.org>
2017-12-20Merge tag 'sh-pfc-for-v4.16-tag1' of ↵Linus Walleij1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into devel pinctrl: sh-pfc: Updates for v4.16 - Add CAN pin groups on RZ/G1E, - Add CAN and CAN FD pin groups on R-Car H3 ES2.0, and R-Car D3, - Add support for the new R-Car V3M SoC, - Add support for I2C on R-Car D3, - Small fixes and cleanups.
2017-12-20dt-bindings: pinctrl: add bindings for MediaTek MT7622 SoCSean Wang1-0/+351
Add devicetree bindings for MediaTek MT7622 pinctrl driver. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Reviewed-by: Biao Huang <biao.huang@mediatek.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-20pinctrl: stm32: Add STM32MP157 MPU supportLudovic Barre1-0/+2
This driver consists of 2 controllers due to a hole in mapping: -1 controller for GPIO bankA to K. -1 controller for GPIO bankZ. Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: Ludovic Barre <ludovic.barre@st.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-15documentation: Add compatibles for Amlogic Meson AXG pin controllersXingyu Chen1-0/+2
Add compatibles for Amlogic Meson AXG pin controllers Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Rob Herring <robh at kernel.org> Signed-off-by: Xingyu Chen <xingyu.chen@amlogic.com> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2017-12-13dt-bindings: pinctrl: Add bindings for Microsemi OcelotAlexandre Belloni1-0/+39
Add the documentation for the Microsemi Ocelot pinmuxing and gpio controller. Cc: Linus Walleij <linus.walleij@linaro.org> Cc: linux-gpio@vger.kernel.org Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-07pinctrl: gemini: Support drive strength settingLinus Walleij1-0/+3
The Gemini pin controller can set drive strength for a few select groups of pins (not individually). Implement this for GMAC0 and 1 (ethernet ports), IDE and PCI. Cc: devicetree@vger.kernel.org Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-06dt-bindings: Remove leading 0x from bindings notationMathieu Malaterre4-6/+6
Improve the binding example by removing all the leading 0x to fix the following dtc warnings: Warning (unit_address_format): Node /XXX unit name should not have leading "0x" Converted using the following command: find Documentation/devicetree/bindings -name "*.txt" -exec sed -i -e 's/([^ ])\@0x([0-9a-f])/$1\@$2/g' {} + This is a follow up to commit 48c926cd3414 Signed-off-by: Mathieu Malaterre <malat@debian.org> Signed-off-by: Rob Herring <robh@kernel.org>
2017-12-05pinctrl: sh-pfc: Add R8A77970 PFC supportSergei Shtylyov1-0/+1
Add the PFC support for the R8A77970 SoC including pin groups for some on-chip devices such as CAN-FD, [H]SCIF, I2C, INTC-EX, MMC, MSIOF, PWM, VIN... Based on the original (and large) patch by Daisuke Matsushita <daisuke.matsushita.ns@hitachi.com>. Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Acked-by: Rob Herring <robh@kernel.org> [geert: Drop EtherAVB for now] Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2017-12-02dt-bindings: pinctrl: uniphier: add UniPhier pinctrl bindingMasahiro Yamada1-0/+27
The driver has been in the tree for a while, but its binding document is missing. Hence, here it is. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-11-30documentation: Add compatibles for Amlogic Meson AXG pin controllersXingyu Chen1-0/+2
Add compatibles for Amlogic Meson AXG pin controllers Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Xingyu Chen <xingyu.chen@amlogic.com> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-11-16Merge tag 'armsoc-dt' of ↵Linus Torvalds1-2/+20
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM device-tree updates from Arnd Bergmann: "We add device tree files for a couple of additional SoCs in various areas: Allwinner R40/V40 for entertainment, Broadcom Hurricane 2 for networking, Amlogic A113D for audio, and Renesas R-Car V3M for automotive. As usual, lots of new boards get added based on those and other SoCs: - Actions S500 based CubieBoard6 single-board computer - Amlogic Meson-AXG A113D based development board - Amlogic S912 based Khadas VIM2 single-board computer - Amlogic S912 based Tronsmart Vega S96 set-top-box - Allwinner H5 based NanoPi NEO Plus2 single-board computer - Allwinner R40 based Banana Pi M2 Ultra and Berry single-board computers - Allwinner A83T based TBS A711 Tablet - Broadcom Hurricane 2 based Ubiquiti UniFi Switch 8 - Broadcom bcm47xx based Luxul XAP-1440/XAP-810/ABR-4500/XBR-4500 wireless access points and routers - NXP i.MX51 based Zodiac Inflight Innovations RDU1 board - NXP i.MX53 based GE Healthcare PPD biometric monitor - NXP i.MX6 based Pistachio single-board computer - NXP i.MX6 based Vining-2000 automotive diagnostic interface - NXP i.MX6 based Ka-Ro TX6 Computer-on-Module in additional variants - Qualcomm MSM8974 (Snapdragon 800) based Fairphone 2 phone - Qualcomm MSM8974pro (Snapdragon 801) based Sony Xperia Z2 Tablet - Realtek RTD1295 based set-top-boxes MeLE V9 and PROBOX2 AVA - Renesas R-Car V3M (R8A77970) SoC and "Eagle" reference board - Renesas H3ULCB and M3ULCB "Kingfisher" extension infotainment boards - Renasas r8a7745 based iWave G22D-SODIMM SoM - Rockchip rk3288 based Amarula Vyasa single-board computer - Samsung Exynos5800 based Odroid HC1 single-board computer For existing SoC support, there was a lot of ongoing work, as usual most of that concentrated on the Renesas, Rockchip, OMAP, i.MX, Amlogic and Allwinner platforms, but others were also active. Rob Herring and many others worked on reducing the number of issues that the latest version of 'dtc' now warns about. Unfortunately there is still a lot left to do. A rework of the ARM foundation model introduced several new files for common variations of the model" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (599 commits) arm64: dts: uniphier: route on-board device IRQ to GPIO controller for PXs3 dt-bindings: bus: Add documentation for the Technologic Systems NBUS arm64: dts: actions: s900-bubblegum-96: Add fake uart5 clock ARM: dts: owl-s500: Add CubieBoard6 dt-bindings: arm: actions: Add CubieBoard6 ARM: dts: owl-s500-guitar-bb-rev-b: Add fake uart3 clock ARM: dts: owl-s500: Set power domains for CPU2 and CPU3 arm: dts: mt7623: remove unused compatible string for pio node arm: dts: mt7623: update usb related nodes arm: dts: mt7623: update crypto node ARM: dts: sun8i: a711: Enable USB OTG ARM: dts: sun8i: a711: Add regulator support ARM: dts: sun8i: a83t: bananapi-m3: Enable AP6212 WiFi on mmc1 ARM: dts: sun8i: a83t: cubietruck-plus: Enable AP6330 WiFi on mmc1 ARM: dts: sun8i: a83t: Move mmc1 pinctrl setting to dtsi file ARM: dts: sun8i: a83t: allwinner-h8homlet-v2: Add AXP818 regulator nodes ARM: dts: sun8i: a83t: bananapi-m3: Add AXP813 regulator nodes ARM: dts: sun8i: a83t: cubietruck-plus: Add AXP818 regulator nodes ARM: dts: sunxi: Add dtsi for AXP81x PMIC arm64: dts: allwinner: H5: Restore EMAC changes ...
2017-11-16Merge tag 'pinctrl-v4.15-1' of ↵Linus Torvalds6-6/+162
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "This is the bulk of pin control changes for the v4.15 kernel cycle: Core: - The pin control Kconfig entry PINCTRL is now turned into a menuconfig option. This obviously has the implication of making the subsystem menu visible in menuconfig. This is happening because of two things: (a) Intel have started to deploy and depend on pin controllers in a way that is affecting users directly. This happens on the highly integrated laptop chipsets named after geographical places: baytrail, broxton, cannonlake, cedarfork, cherryview, denverton, geminilake, lewisburg, merrifield, sunrisepoint... It started a while back and now it is ever more evident that this is crucial infrastructure for x86 laptops and not an embedded obscurity anymore. Users need to be aware. (b) Pin control expanders on I2C and SPI that are arch-agnostic. Currently Semtech SX150X and Microchip MCP28x08 but more are expected. Users will have to be able to configure these in directly for their set-up. - Just go and select GPIOLIB now that we made sure that GPIOLIB is a very vanilla subsystem. Do not depend on it, if we need it, select it. - Exposing the pin control subsystem in menuconfig uncovered a bunch of obscure bugs that are now hopefully fixed, all more or less pertaining to Blackfin. - Unified namespace for cross-calls between pin control and GPIO. - New support for clock skew/delay generic DT bindings and generic pin config options for this. - Minor documentation improvements. Various: - The Renesas SH-PFC pin controller has evolved a lot. It seems Renesas are churning out new SoCs by the minute. - A bunch of non-critical fixes for the Rockchip driver. - Improve the use of library functions instead of open coding. - Support the MCP28018 variant in the MCP28x08 driver. - Static constifying" * tag 'pinctrl-v4.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (91 commits) pinctrl: gemini: Fix missing pad descriptions pinctrl: Add some depends on HAS_IOMEM pinctrl: samsung/s3c24xx: add CONFIG_OF dependency pinctrl: gemini: Fix GMAC groups pinctrl: qcom: spmi-gpio: Add pmi8994 gpio support pinctrl: ti-iodelay: remove redundant unused variable dev pinctrl: max77620: Use common error handling code in max77620_pinconf_set() pinctrl: gemini: Implement clock skew/delay config pinctrl: gemini: Use generic DT parser pinctrl: Add skew-delay pin config and bindings pinctrl: armada-37xx: Add edge both type gpio irq support pinctrl: uniphier: remove eMMC hardware reset pin-mux pinctrl: rockchip: Add iomux-route switching support for rk3288 pinctrl: intel: Add Intel Cedar Fork PCH pin controller support pinctrl: intel: Make offset to interrupt status register configurable pinctrl: sunxi: Enforce the strict mode by default pinctrl: sunxi: Disable strict mode for old pinctrl drivers pinctrl: sunxi: Introduce the strict flag pinctrl: sh-pfc: Save/restore registers for PSCI system suspend pinctrl: sh-pfc: r8a7796: Use generic IOCTRL register description ...
2017-11-09dt-bindings: Remove leading zeros from bindings notationMarco Franchi8-11/+11
Improve the binding example by removing all the leading zeros to fix the following dtc warnings: Warning (unit_address_format): Node /XXX unit name should not have leading 0s Converted using the following command: perl -p -i -e 's/\@0+([0-9a-f])/\@$1/g' `find ./Documentation/devicetree/bindings "*.txt"` Some unnecessary changes were manually fixed. Signed-off-by: Marco Franchi <marco.franchi@nxp.com> Signed-off-by: Rob Herring <robh@kernel.org>
2017-11-08pinctrl: qcom: spmi-gpio: Add pmi8994 gpio supportRajendra Nayak1-0/+2
Update the binding and driver for pmi8994-gpios Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-11-08pinctrl: gemini: Implement clock skew/delay configLinus Walleij1-2/+8
This enabled pin config on the Gemini driver and implements pin skew/delay so that the ethernet pins clocking can be properly configured. Acked-by: Hans Ulli Kroll <ulli.kroll@googlemail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-11-08pinctrl: Add skew-delay pin config and bindingsLinus Walleij1-0/+4
Some pin controllers (such as the Gemini) can control the expected clock skew and output delay on certain pins with a sub-nanosecond granularity. This is typically done by shunting in a number of double inverters in front of or behind the pin. Make it possible to configure this with a generic binding. Cc: devicetree@vger.kernel.org Acked-by: Rob Herring <robh@kernel.org> Acked-by: Hans Ulli Kroll <ulli.kroll@googlemail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-10-20Merge tag 'sh-pfc-for-v4.15-tag2' of ↵Linus Walleij1-2/+4
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into devel pinctrl: sh-pfc: Updates for v4.15 (take two) - Add Audio, HSCIF, I2C, and INTC-EX pin groups on R-Car H3 ES2.0, - Add Audio and PWM pin groups on R-Car D3, - Add support for RZ/A1M and RZ/A1L, - Add INTC-EX pin groups on R-Car M3-W, - Add SDHI voltage switching on RZ/G1E, - Make bias control and IOCTRL support more generic, - Add suspend/resume support for R-Car Gen3, - Small fixes and cleanups.
2017-10-16pinctrl: dt-bindings: Fix A37xx uart2 group nameMiquel Raynal1-2/+2
Fix a typo in A37xx pin controllers documentation about uart2 pin group. Signed-off-by: Miquel Raynal <miquel.raynal@free-electrons.com> Reviewed-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-10-16ARM: dts: stm32: change pinctrl bindings definitionAlexandre Torgue1-2/+20
Initially each pin was declared in "include/dt-bindings/stm32<SOC>-pinfunc.h" and each definition contained SOC names (ex: STM32F429_PA9_FUNC_USART1_TX). Since this approach was approved, the number of supported MCU has increased (STM32F429/STM32F469/STM32f746/STM32H743). To avoid to add a new file in "include/dt-bindings" each time a new STM32 SOC arrives I propose a new approach which consist to use a macro to define pin muxing in device tree. All STM32 will use the common macro to define pinmux. Furthermore, it will make STM32 maintenance and integration of new SOC easier . Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com> Reviewed-by: Vikas MANOCHA <vikas.manocha@st.com> Reviewed-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Rob Herring <robh@kernel.org>
2017-10-11dt-bindings: pinctrl: add mcp23018 to mcp23s08 documentationPhil Reid1-0/+1
This adds the compatible string for the mcp23018, which is the i2c variant of the mcp23s18. Signed-off-by: Phil Reid <preid@electromag.com.au> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-10-11dt-bindings: pinctrl: mcp23s08 update binding docLars Poeschel1-0/+58
The mcp23s08 driver moved to pinctrl recently. It accepts the bias-pull-up pinctrl property since then. This updates the binding doc to reflect that. Thanks to Sebastian Reichel for the working example. Signed-off-by: Lars Poeschel <poeschel@lemonage.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-10-11dt-bindings: pinctrl: Move mcp23s08 from gpioLars Poeschel1-0/+83
The mcp23s08 driver was moved from gpio to pinctrl. This moves it's devicetree binding doc as well. So driver and binding doc are in sync again. Signed-off-by: Lars Poeschel <poeschel@lemonage.de> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-10-09dt-bindings: pinctrl: Add support for RZ/A1M and RZ/A1LChris Brandt1-2/+4
Describe how to specify RZ/A1M and RZ/A1L devices. Signed-off-by: Chris Brandt <chris.brandt@renesas.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2017-09-07Merge tag 'devicetree-for-4.14' of ↵Linus Torvalds9-10/+1
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull DeviceTree updates from Rob Herring: "There's a few orphans in the conversion to %pOF printf specifiers included here that no one else picked up. Summary: - Convert more DT code to use of_property_read_* API. - Improve DT overlay support when adding multiple overlays - Convert printk's to %pOF format specifiers. Most went via subsystem trees, but picked up the remaining orphans - Correct unittests to use preferred "okay" for "status" property value - Add a KASLR seed property - Vendor prefixes for Mellanox, Theobroma System, Adaptrum, Moxa - Fix modalias buffer handling - Clean-up of include paths for building dtbs - Add bindings for amc6821, isl1208, tsl2x7x, srf02, and srf10 devices - Add nvmem bindings for MediaTek MT7623 and MT7622 SoC - Add compatible string for Allwinner H5 Mali-450 GPU - Fix links to old OpenFirmware docs with new mirror on devicetree.org - Remove status property from binding doc examples" * tag 'devicetree-for-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (45 commits) devicetree: Adjust status "ok" -> "okay" under drivers/of/ dt-bindings: Remove "status" from examples dt-bindings: pinctrl: sh-pfc: Use generic node name dt-bindings: Add vendor Mellanox dt-binding: net/phy: fix interrupts description virt: Convert to using %pOF instead of full_name macintosh: Convert to using %pOF instead of full_name ide: pmac: Convert to using %pOF instead of full_name microblaze: Convert to using %pOF instead of full_name dt-bindings: usb: musb: Grammar s/the/to/, s/is/are/ of: Use PLATFORM_DEVID_NONE definition of/device: Fix of_device_get_modalias() buffer handling of/device: Prevent buffer overflow in of_device_modalias() dt-bindings: add amc6821, isl1208 trivial bindings dt-bindings: add vendor prefix for Theobroma Systems of: search scripts/dtc/include-prefixes path for both CPP and DTC of: remove arch/$(SRCARCH)/boot/dts from include search path for CPP of: remove drivers/of/testcase-data from include search path for CPP of: return of_get_cpu_node from of_cpu_device_node_get if CPUs are not registered iio: srf08: add device tree binding for srf02 and srf10 ...
2017-09-07Merge tag 'mfd-next-4.14' of ↵Linus Torvalds1-0/+63
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "New Drivers - RK805 Power Management IC (PMIC) - ROHM BD9571MWV-M MFD Power Management IC (PMIC) - Texas Instruments TPS68470 Power Management IC (PMIC) & LEDs New Device Support: - Add support for HiSilicon Hi6421v530 to hi6421-pmic-core - Add support for X-Powers AXP806 to axp20x - Add support for X-Powers AXP813 to axp20x - Add support for Intel Sunrise Point LPSS to intel-lpss-pci New Functionality: - Amend API to provide register layout; atmel-smc Fix-ups: - DT re-work; omap, nokia - Header file location change {I2C => MFD}; dm355evm_msp, tps65010 - Fix chip ID formatting issue(s); rk808 - Optionally register touchscreen devices; da9052-core - Documentation improvements; twl-core - Constification; rtsx_pcr, ab8500-core, da9055-i2c, da9052-spi - Drop unnecessary static declaration; max8925-i2c - Kconfig changes (missing deps and remove module support) - Slim down oversized licence statement; hi6421-pmic-core - Use managed resources (devm_*); lp87565 - Supply proper error checking/handling; t7l66xb Bug Fixes: - Fix counter duplication issue; da9052-core - Fix potential NULL deference issue; max8998 - Leave SPI-NOR write-protection bit alone; lpc_ich - Ensure device is put into reset during suspend; intel-lpss - Correct register offset variable size; omap-usb-tll" * tag 'mfd-next-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (61 commits) mfd: intel_soc_pmic: Differentiate between Bay and Cherry Trail CRC variants mfd: intel_soc_pmic: Export separate mfd-cell configs for BYT and CHT dt-bindings: mfd: Add bindings for ZII RAVE devices mfd: omap-usb-tll: Fix register offsets mfd: da9052: Constify spi_device_id mfd: intel-lpss: Put I2C and SPI controllers into reset state on suspend mfd: da9055: Constify i2c_device_id mfd: intel-lpss: Add missing PCI ID for Intel Sunrise Point LPSS devices mfd: t7l66xb: Handle return value of clk_prepare_enable mfd: Add ROHM BD9571MWV-M PMIC DT bindings mfd: intel_soc_pmic_chtwc: Turn Kconfig option into a bool mfd: lp87565: Convert to use devm_mfd_add_devices() mfd: Add support for TPS68470 device mfd: lpc_ich: Do not touch SPI-NOR write protection bit on Haswell/Broadwell mfd: syscon: atmel-smc: Add helper to retrieve register layout mfd: axp20x: Use correct platform device ID for many PEK dt-bindings: mfd: axp20x: Introduce bindings for AXP813 mfd: axp20x: Add support for AXP813 PMIC dt-bindings: mfd: axp20x: Add AXP806 to supported list of chips mfd: Add ROHM BD9571MWV-M MFD PMIC driver ...
2017-09-05dt-bindings: Remove "status" from examplesRob Herring9-9/+0
Pretty much any node can have a status property, so it doesn't need to be in examples. Converted with the following command and removed examples with SoC and board specific splits: git grep -l -E 'status.*=.*' Documentation/devicetree/ | xargs sed -i -E '/\sstatus.*=.*"(disabled|ok|okay)/d' Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Rob Herring <robh@kernel.org>
2017-09-01dt-bindings: pinctrl: sh-pfc: Use generic node nameGeert Uytterhoeven1-1/+1
Use the preferred generic node name in the example. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Rob Herring <robh@kernel.org>