diff options
Diffstat (limited to 'drivers/spi')
| -rw-r--r-- | drivers/spi/spi-imx.c | 24 |
1 files changed, 21 insertions, 3 deletions
diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c index c5eeb846d9fd..6497fc9c2735 100644 --- a/drivers/spi/spi-imx.c +++ b/drivers/spi/spi-imx.c @@ -56,7 +56,6 @@ /* The maximum bytes that a sdma BD can transfer.*/ #define MAX_SDMA_BD_BYTES (1 << 15) -#define IMX_DMA_TIMEOUT (msecs_to_jiffies(3000)) struct spi_imx_config { unsigned int speed_hz; unsigned int bpw; @@ -93,6 +92,7 @@ struct spi_imx_data { struct clk *clk_per; struct clk *clk_ipg; unsigned long spi_clk; + unsigned int spi_bus_clk; unsigned int count; void (*tx)(struct spi_imx_data *); @@ -333,6 +333,7 @@ static int __maybe_unused mx51_ecspi_config(struct spi_imx_data *spi_imx, /* set clock speed */ ctrl |= mx51_ecspi_clkdiv(spi_imx, config->speed_hz, &clk); + spi_imx->spi_bus_clk = clk; /* set chip select to use */ ctrl |= MX51_ECSPI_CTRL_CS(config->cs); @@ -915,11 +916,26 @@ static void spi_imx_dma_tx_callback(void *cookie) complete(&spi_imx->dma_tx_completion); } +static int spi_imx_calculate_timeout(struct spi_imx_data *spi_imx, int size) +{ + unsigned long timeout = 0; + + /* Time with actual data transfer and CS change delay related to HW */ + timeout = (8 + 4) * size / spi_imx->spi_bus_clk; + + /* Add extra second for scheduler related activities */ + timeout += 1; + + /* Double calculated timeout */ + return msecs_to_jiffies(2 * timeout * MSEC_PER_SEC); +} + static int spi_imx_dma_transfer(struct spi_imx_data *spi_imx, struct spi_transfer *transfer) { struct dma_async_tx_descriptor *desc_tx = NULL, *desc_rx = NULL; int ret; + unsigned long transfer_timeout; unsigned long timeout; struct spi_master *master = spi_imx->bitbang.master; struct sg_table *tx = &transfer->tx_sg, *rx = &transfer->rx_sg; @@ -966,16 +982,18 @@ static int spi_imx_dma_transfer(struct spi_imx_data *spi_imx, dma_async_issue_pending(master->dma_tx); spi_imx->devtype_data->trigger(spi_imx); + transfer_timeout = spi_imx_calculate_timeout(spi_imx, transfer->len); + /* Wait SDMA to finish the data transfer.*/ timeout = wait_for_completion_timeout(&spi_imx->dma_tx_completion, - IMX_DMA_TIMEOUT); + transfer_timeout); if (!timeout) { dev_err(spi_imx->dev, "I/O Error in DMA TX\n"); dmaengine_terminate_all(master->dma_tx); dmaengine_terminate_all(master->dma_rx); } else { timeout = wait_for_completion_timeout( - &spi_imx->dma_rx_completion, IMX_DMA_TIMEOUT); + &spi_imx->dma_rx_completion, transfer_timeout); if (!timeout) { dev_err(spi_imx->dev, "I/O Error in DMA RX\n"); spi_imx->devtype_data->reset(spi_imx); |