diff options
Diffstat (limited to 'drivers/pci/pcie')
-rw-r--r-- | drivers/pci/pcie/Kconfig | 20 | ||||
-rw-r--r-- | drivers/pci/pcie/Makefile | 3 | ||||
-rw-r--r-- | drivers/pci/pcie/aer/aerdrv.c | 9 | ||||
-rw-r--r-- | drivers/pci/pcie/aer/aerdrv_acpi.c | 36 | ||||
-rw-r--r-- | drivers/pci/pcie/aer/aerdrv_core.c | 31 | ||||
-rw-r--r-- | drivers/pci/pcie/aspm.c | 16 | ||||
-rw-r--r-- | drivers/pci/pcie/pme.c (renamed from drivers/pci/pcie/pme/pcie_pme.c) | 66 | ||||
-rw-r--r-- | drivers/pci/pcie/pme/Makefile | 8 | ||||
-rw-r--r-- | drivers/pci/pcie/pme/pcie_pme.h | 28 | ||||
-rw-r--r-- | drivers/pci/pcie/pme/pcie_pme_acpi.c | 54 | ||||
-rw-r--r-- | drivers/pci/pcie/portdrv.h | 22 | ||||
-rw-r--r-- | drivers/pci/pcie/portdrv_acpi.c | 77 | ||||
-rw-r--r-- | drivers/pci/pcie/portdrv_core.c | 53 | ||||
-rw-r--r-- | drivers/pci/pcie/portdrv_pci.c | 38 |
14 files changed, 231 insertions, 230 deletions
diff --git a/drivers/pci/pcie/Kconfig b/drivers/pci/pcie/Kconfig index b8b494b3e0d0..dda70981b7a6 100644 --- a/drivers/pci/pcie/Kconfig +++ b/drivers/pci/pcie/Kconfig @@ -31,14 +31,22 @@ source "drivers/pci/pcie/aer/Kconfig" # PCI Express ASPM # config PCIEASPM - bool "PCI Express ASPM support(Experimental)" - depends on PCI && EXPERIMENTAL && PCIEPORTBUS - default n + bool "PCI Express ASPM control" if EMBEDDED + depends on PCI && PCIEPORTBUS + default y help - This enables PCI Express ASPM (Active State Power Management) and - Clock Power Management. ASPM supports state L0/L0s/L1. + This enables OS control over PCI Express ASPM (Active State + Power Management) and Clock Power Management. ASPM supports + state L0/L0s/L1. - When in doubt, say N. + ASPM is initially set up the the firmware. With this option enabled, + Linux can modify this state in order to disable ASPM on known-bad + hardware or configurations and enable it when known-safe. + + ASPM can be disabled or enabled at runtime via + /sys/module/pcie_aspm/parameters/policy + + When in doubt, say Y. config PCIEASPM_DEBUG bool "Debug PCI Express ASPM" depends on PCIEASPM diff --git a/drivers/pci/pcie/Makefile b/drivers/pci/pcie/Makefile index ea654545e7c4..00c62df5a9fc 100644 --- a/drivers/pci/pcie/Makefile +++ b/drivers/pci/pcie/Makefile @@ -6,10 +6,11 @@ obj-$(CONFIG_PCIEASPM) += aspm.o pcieportdrv-y := portdrv_core.o portdrv_pci.o portdrv_bus.o +pcieportdrv-$(CONFIG_ACPI) += portdrv_acpi.o obj-$(CONFIG_PCIEPORTBUS) += pcieportdrv.o # Build PCI Express AER if needed obj-$(CONFIG_PCIEAER) += aer/ -obj-$(CONFIG_PCIE_PME) += pme/ +obj-$(CONFIG_PCIE_PME) += pme.o diff --git a/drivers/pci/pcie/aer/aerdrv.c b/drivers/pci/pcie/aer/aerdrv.c index 484cc55194b8..f409948e1a9b 100644 --- a/drivers/pci/pcie/aer/aerdrv.c +++ b/drivers/pci/pcie/aer/aerdrv.c @@ -72,6 +72,11 @@ void pci_no_aer(void) pcie_aer_disable = 1; /* has priority over 'forceload' */ } +bool pci_aer_available(void) +{ + return !pcie_aer_disable && pci_msi_enabled(); +} + static int set_device_error_reporting(struct pci_dev *dev, void *data) { bool enable = *((bool *)data); @@ -411,9 +416,7 @@ static void aer_error_resume(struct pci_dev *dev) */ static int __init aer_service_init(void) { - if (pcie_aer_disable) - return -ENXIO; - if (!pci_msi_enabled()) + if (!pci_aer_available()) return -ENXIO; return pcie_port_service_register(&aerdriver); } diff --git a/drivers/pci/pcie/aer/aerdrv_acpi.c b/drivers/pci/pcie/aer/aerdrv_acpi.c index f278d7b0d95d..2bb9b8972211 100644 --- a/drivers/pci/pcie/aer/aerdrv_acpi.c +++ b/drivers/pci/pcie/aer/aerdrv_acpi.c @@ -19,42 +19,6 @@ #include <acpi/apei.h> #include "aerdrv.h" -/** - * aer_osc_setup - run ACPI _OSC method - * @pciedev: pcie_device which AER is being enabled on - * - * @return: Zero on success. Nonzero otherwise. - * - * Invoked when PCIe bus loads AER service driver. To avoid conflict with - * BIOS AER support requires BIOS to yield AER control to OS native driver. - **/ -int aer_osc_setup(struct pcie_device *pciedev) -{ - acpi_status status = AE_NOT_FOUND; - struct pci_dev *pdev = pciedev->port; - acpi_handle handle = NULL; - - if (acpi_pci_disabled) - return -1; - - handle = acpi_find_root_bridge_handle(pdev); - if (handle) { - status = acpi_pci_osc_control_set(handle, - OSC_PCI_EXPRESS_AER_CONTROL | - OSC_PCI_EXPRESS_CAP_STRUCTURE_CONTROL); - } - - if (ACPI_FAILURE(status)) { - dev_printk(KERN_DEBUG, &pciedev->device, "AER service couldn't " - "init device: %s\n", - (status == AE_SUPPORT || status == AE_NOT_FOUND) ? - "no _OSC support" : "_OSC failed"); - return -1; - } - - return 0; -} - #ifdef CONFIG_ACPI_APEI static inline int hest_match_pci(struct acpi_hest_aer_common *p, struct pci_dev *pci) diff --git a/drivers/pci/pcie/aer/aerdrv_core.c b/drivers/pci/pcie/aer/aerdrv_core.c index 8af4f619bba2..29e268fadf14 100644 --- a/drivers/pci/pcie/aer/aerdrv_core.c +++ b/drivers/pci/pcie/aer/aerdrv_core.c @@ -727,20 +727,21 @@ static void aer_isr_one_error(struct pcie_device *p_device, static int get_e_source(struct aer_rpc *rpc, struct aer_err_source *e_src) { unsigned long flags; - int ret = 0; /* Lock access to Root error producer/consumer index */ spin_lock_irqsave(&rpc->e_lock, flags); - if (rpc->prod_idx != rpc->cons_idx) { - *e_src = rpc->e_sources[rpc->cons_idx]; - rpc->cons_idx++; - if (rpc->cons_idx == AER_ERROR_SOURCES_MAX) - rpc->cons_idx = 0; - ret = 1; + if (rpc->prod_idx == rpc->cons_idx) { + spin_unlock_irqrestore(&rpc->e_lock, flags); + return 0; } + + *e_src = rpc->e_sources[rpc->cons_idx]; + rpc->cons_idx++; + if (rpc->cons_idx == AER_ERROR_SOURCES_MAX) + rpc->cons_idx = 0; spin_unlock_irqrestore(&rpc->e_lock, flags); - return ret; + return 1; } /** @@ -771,22 +772,10 @@ void aer_isr(struct work_struct *work) */ int aer_init(struct pcie_device *dev) { - if (pcie_aer_get_firmware_first(dev->port)) { - dev_printk(KERN_DEBUG, &dev->device, - "PCIe errors handled by platform firmware.\n"); - goto out; - } - - if (aer_osc_setup(dev)) - goto out; - - return 0; -out: if (forceload) { dev_printk(KERN_DEBUG, &dev->device, "aerdrv forceload requested.\n"); pcie_aer_force_firmware_first(dev->port, 0); - return 0; } - return -ENXIO; + return 0; } diff --git a/drivers/pci/pcie/aspm.c b/drivers/pci/pcie/aspm.c index be53d98fa384..71222814c1ec 100644 --- a/drivers/pci/pcie/aspm.c +++ b/drivers/pci/pcie/aspm.c @@ -588,11 +588,23 @@ void pcie_aspm_init_link_state(struct pci_dev *pdev) * update through pcie_aspm_cap_init(). */ pcie_aspm_cap_init(link, blacklist); - pcie_config_aspm_path(link); /* Setup initial Clock PM state */ pcie_clkpm_cap_init(link, blacklist); - pcie_set_clkpm(link, policy_to_clkpm_state(link)); + + /* + * At this stage drivers haven't had an opportunity to change the + * link policy setting. Enabling ASPM on broken hardware can cripple + * it even before the driver has had a chance to disable ASPM, so + * default to a safe level right now. If we're enabling ASPM beyond + * the BIOS's expectation, we'll do so once pci_enable_device() is + * called. + */ + if (aspm_policy != POLICY_POWERSAVE) { + pcie_config_aspm_path(link); + pcie_set_clkpm(link, policy_to_clkpm_state(link)); + } + unlock: mutex_unlock(&aspm_lock); out: diff --git a/drivers/pci/pcie/pme/pcie_pme.c b/drivers/pci/pcie/pme.c index bbdea18693d9..2f3c90407227 100644 --- a/drivers/pci/pcie/pme/pcie_pme.c +++ b/drivers/pci/pcie/pme.c @@ -23,38 +23,13 @@ #include <linux/pci-acpi.h> #include <linux/pm_runtime.h> -#include "../../pci.h" -#include "pcie_pme.h" +#include "../pci.h" +#include "portdrv.h" #define PCI_EXP_RTSTA_PME 0x10000 /* PME status */ #define PCI_EXP_RTSTA_PENDING 0x20000 /* PME pending */ /* - * If set, this switch will prevent the PCIe root port PME service driver from - * being registered. Consequently, the interrupt-based PCIe PME signaling will - * not be used by any PCIe root ports in that case. - */ -static bool pcie_pme_disabled = true; - -/* - * The PCI Express Base Specification 2.0, Section 6.1.8, states the following: - * "In order to maintain compatibility with non-PCI Express-aware system - * software, system power management logic must be configured by firmware to use - * the legacy mechanism of signaling PME by default. PCI Express-aware system - * software must notify the firmware prior to enabling native, interrupt-based - * PME signaling." However, if the platform doesn't provide us with a suitable - * notification mechanism or the notification fails, it is not clear whether or - * not we are supposed to use the interrupt-based PCIe PME signaling. The - * switch below can be used to indicate the desired behaviour. When set, it - * will make the kernel use the interrupt-based PCIe PME signaling regardless of - * the platform notification status, although the kernel will attempt to notify - * the platform anyway. When unset, it will prevent the kernel from using the - * the interrupt-based PCIe PME signaling if the platform notification fails, - * which is the default. - */ -static bool pcie_pme_force_enable; - -/* * If this switch is set, MSI will not be used for PCIe PME signaling. This * causes the PCIe port driver to use INTx interrupts only, but it turns out * that using MSI for PCIe PME signaling doesn't play well with PCIe PME-based @@ -64,38 +39,13 @@ bool pcie_pme_msi_disabled; static int __init pcie_pme_setup(char *str) { - if (!strncmp(str, "auto", 4)) - pcie_pme_disabled = false; - else if (!strncmp(str, "force", 5)) - pcie_pme_force_enable = true; - - str = strchr(str, ','); - if (str) { - str++; - str += strspn(str, " \t"); - if (*str && !strcmp(str, "nomsi")) - pcie_pme_msi_disabled = true; - } + if (!strncmp(str, "nomsi", 5)) + pcie_pme_msi_disabled = true; return 1; } __setup("pcie_pme=", pcie_pme_setup); -/** - * pcie_pme_platform_setup - Ensure that the kernel controls the PCIe PME. - * @srv: PCIe PME root port service to use for carrying out the check. - * - * Notify the platform that the native PCIe PME is going to be used and return - * 'true' if the control of the PCIe PME registers has been acquired from the - * platform. - */ -static bool pcie_pme_platform_setup(struct pcie_device *srv) -{ - if (!pcie_pme_platform_notify(srv)) - return true; - return pcie_pme_force_enable; -} - struct pcie_pme_service_data { spinlock_t lock; struct pcie_device *srv; @@ -108,7 +58,7 @@ struct pcie_pme_service_data { * @dev: PCIe root port or event collector. * @enable: Enable or disable the interrupt. */ -static void pcie_pme_interrupt_enable(struct pci_dev *dev, bool enable) +void pcie_pme_interrupt_enable(struct pci_dev *dev, bool enable) { int rtctl_pos; u16 rtctl; @@ -417,9 +367,6 @@ static int pcie_pme_probe(struct pcie_device *srv) struct pcie_pme_service_data *data; int ret; - if (!pcie_pme_platform_setup(srv)) - return -EACCES; - data = kzalloc(sizeof(*data), GFP_KERNEL); if (!data) return -ENOMEM; @@ -509,8 +456,7 @@ static struct pcie_port_service_driver pcie_pme_driver = { */ static int __init pcie_pme_service_init(void) { - return pcie_pme_disabled ? - -ENODEV : pcie_port_service_register(&pcie_pme_driver); + return pcie_port_service_register(&pcie_pme_driver); } module_init(pcie_pme_service_init); diff --git a/drivers/pci/pcie/pme/Makefile b/drivers/pci/pcie/pme/Makefile deleted file mode 100644 index 8b9238053080..000000000000 --- a/drivers/pci/pcie/pme/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# -# Makefile for PCI-Express Root Port PME signaling driver -# - -obj-$(CONFIG_PCIE_PME) += pmedriver.o - -pmedriver-objs := pcie_pme.o -pmedriver-$(CONFIG_ACPI) += pcie_pme_acpi.o diff --git a/drivers/pci/pcie/pme/pcie_pme.h b/drivers/pci/pcie/pme/pcie_pme.h deleted file mode 100644 index b30d2b7c9775..000000000000 --- a/drivers/pci/pcie/pme/pcie_pme.h +++ /dev/null @@ -1,28 +0,0 @@ -/* - * drivers/pci/pcie/pme/pcie_pme.h - * - * PCI Express Root Port PME signaling support - * - * Copyright (C) 2009 Rafael J. Wysocki <rjw@sisk.pl>, Novell Inc. - */ - -#ifndef _PCIE_PME_H_ -#define _PCIE_PME_H_ - -struct pcie_device; - -#ifdef CONFIG_ACPI -extern int pcie_pme_acpi_setup(struct pcie_device *srv); - -static inline int pcie_pme_platform_notify(struct pcie_device *srv) -{ - return pcie_pme_acpi_setup(srv); -} -#else /* !CONFIG_ACPI */ -static inline int pcie_pme_platform_notify(struct pcie_device *srv) -{ - return 0; -} -#endif /* !CONFIG_ACPI */ - -#endif diff --git a/drivers/pci/pcie/pme/pcie_pme_acpi.c b/drivers/pci/pcie/pme/pcie_pme_acpi.c deleted file mode 100644 index 83ab2287ae3f..000000000000 --- a/drivers/pci/pcie/pme/pcie_pme_acpi.c +++ /dev/null @@ -1,54 +0,0 @@ -/* - * PCIe Native PME support, ACPI-related part - * - * Copyright (C) 2009 Rafael J. Wysocki <rjw@sisk.pl>, Novell Inc. - * - * This file is subject to the terms and conditions of the GNU General Public - * License V2. See the file "COPYING" in the main directory of this archive - * for more details. - */ - -#include <linux/pci.h> -#include <linux/kernel.h> -#include <linux/errno.h> -#include <linux/acpi.h> -#include <linux/pci-acpi.h> -#include <linux/pcieport_if.h> - -/** - * pcie_pme_acpi_setup - Request the ACPI BIOS to release control over PCIe PME. - * @srv - PCIe PME service for a root port or event collector. - * - * Invoked when the PCIe bus type loads PCIe PME service driver. To avoid - * conflict with the BIOS PCIe support requires the BIOS to yield PCIe PME - * control to the kernel. - */ -int pcie_pme_acpi_setup(struct pcie_device *srv) -{ - acpi_status status = AE_NOT_FOUND; - struct pci_dev *port = srv->port; - acpi_handle handle; - int error = 0; - - if (acpi_pci_disabled) - return -ENOSYS; - - dev_info(&port->dev, "Requesting control of PCIe PME from ACPI BIOS\n"); - - handle = acpi_find_root_bridge_handle(port); - if (!handle) - return -EINVAL; - - status = acpi_pci_osc_control_set(handle, - OSC_PCI_EXPRESS_PME_CONTROL | - OSC_PCI_EXPRESS_CAP_STRUCTURE_CONTROL); - if (ACPI_FAILURE(status)) { - dev_info(&port->dev, - "Failed to receive control of PCIe PME service: %s\n", - (status == AE_SUPPORT || status == AE_NOT_FOUND) ? - "no _OSC support" : "ACPI _OSC failed"); - error = -ENODEV; - } - - return error; -} diff --git a/drivers/pci/pcie/portdrv.h b/drivers/pci/pcie/portdrv.h index 813a5c3427b6..7b5aba0a3291 100644 --- a/drivers/pci/pcie/portdrv.h +++ b/drivers/pci/pcie/portdrv.h @@ -20,6 +20,9 @@ #define get_descriptor_id(type, service) (((type - 4) << 4) | service) +extern bool pcie_ports_disabled; +extern bool pcie_ports_auto; + extern struct bus_type pcie_port_bus_type; extern int pcie_port_device_register(struct pci_dev *dev); #ifdef CONFIG_PM @@ -30,6 +33,8 @@ extern void pcie_port_device_remove(struct pci_dev *dev); extern int __must_check pcie_port_bus_register(void); extern void pcie_port_bus_unregister(void); +struct pci_dev; + #ifdef CONFIG_PCIE_PME extern bool pcie_pme_msi_disabled; @@ -42,9 +47,26 @@ static inline bool pcie_pme_no_msi(void) { return pcie_pme_msi_disabled; } + +extern void pcie_pme_interrupt_enable(struct pci_dev *dev, bool enable); #else /* !CONFIG_PCIE_PME */ static inline void pcie_pme_disable_msi(void) {} static inline bool pcie_pme_no_msi(void) { return false; } +static inline void pcie_pme_interrupt_enable(struct pci_dev *dev, bool en) {} #endif /* !CONFIG_PCIE_PME */ +#ifdef CONFIG_ACPI +extern int pcie_port_acpi_setup(struct pci_dev *port, int *mask); + +static inline int pcie_port_platform_notify(struct pci_dev *port, int *mask) +{ + return pcie_port_acpi_setup(port, mask); +} +#else /* !CONFIG_ACPI */ +static inline int pcie_port_platform_notify(struct pci_dev *port, int *mask) +{ + return 0; +} +#endif /* !CONFIG_ACPI */ + #endif /* _PORTDRV_H_ */ diff --git a/drivers/pci/pcie/portdrv_acpi.c b/drivers/pci/pcie/portdrv_acpi.c new file mode 100644 index 000000000000..b7c4cb1ccb23 --- /dev/null +++ b/drivers/pci/pcie/portdrv_acpi.c @@ -0,0 +1,77 @@ +/* + * PCIe Port Native Services Support, ACPI-Related Part + * + * Copyright (C) 2010 Rafael J. Wysocki <rjw@sisk.pl>, Novell Inc. + * + * This file is subject to the terms and conditions of the GNU General Public + * License V2. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#include <linux/pci.h> +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/acpi.h> +#include <linux/pci-acpi.h> +#include <linux/pcieport_if.h> + +#include "aer/aerdrv.h" +#include "../pci.h" + +/** + * pcie_port_acpi_setup - Request the BIOS to release control of PCIe services. + * @port: PCIe Port service for a root port or event collector. + * @srv_mask: Bit mask of services that can be enabled for @port. + * + * Invoked when @port is identified as a PCIe port device. To avoid conflicts + * with the BIOS PCIe port native services support requires the BIOS to yield + * control of these services to the kernel. The mask of services that the BIOS + * allows to be enabled for @port is written to @srv_mask. + * + * NOTE: It turns out that we cannot do that for individual port services + * separately, because that would make some systems work incorrectly. + */ +int pcie_port_acpi_setup(struct pci_dev *port, int *srv_mask) +{ + acpi_status status; + acpi_handle handle; + u32 flags; + + if (acpi_pci_disabled) + return 0; + + handle = acpi_find_root_bridge_handle(port); + if (!handle) + return -EINVAL; + + flags = OSC_PCI_EXPRESS_CAP_STRUCTURE_CONTROL + | OSC_PCI_EXPRESS_NATIVE_HP_CONTROL + | OSC_PCI_EXPRESS_PME_CONTROL; + + if (pci_aer_available()) { + if (pcie_aer_get_firmware_first(port)) + dev_dbg(&port->dev, "PCIe errors handled by BIOS.\n"); + else + flags |= OSC_PCI_EXPRESS_AER_CONTROL; + } + + status = acpi_pci_osc_control_set(handle, &flags, + OSC_PCI_EXPRESS_CAP_STRUCTURE_CONTROL); + if (ACPI_FAILURE(status)) { + dev_dbg(&port->dev, "ACPI _OSC request failed (code %d)\n", + status); + return -ENODEV; + } + + dev_info(&port->dev, "ACPI _OSC control granted for 0x%02x\n", flags); + + *srv_mask = PCIE_PORT_SERVICE_VC; + if (flags & OSC_PCI_EXPRESS_NATIVE_HP_CONTROL) + *srv_mask |= PCIE_PORT_SERVICE_HP; + if (flags & OSC_PCI_EXPRESS_PME_CONTROL) + *srv_mask |= PCIE_PORT_SERVICE_PME; + if (flags & OSC_PCI_EXPRESS_AER_CONTROL) + *srv_mask |= PCIE_PORT_SERVICE_AER; + + return 0; +} diff --git a/drivers/pci/pcie/portdrv_core.c b/drivers/pci/pcie/portdrv_core.c index e73effbe402c..a9c222d79ebc 100644 --- a/drivers/pci/pcie/portdrv_core.c +++ b/drivers/pci/pcie/portdrv_core.c @@ -14,6 +14,8 @@ #include <linux/string.h> #include <linux/slab.h> #include <linux/pcieport_if.h> +#include <linux/aer.h> +#include <linux/pci-aspm.h> #include "../pci.h" #include "portdrv.h" @@ -236,24 +238,64 @@ static int get_port_device_capability(struct pci_dev *dev) int services = 0, pos; u16 reg16; u32 reg32; + int cap_mask; + int err; + + err = pcie_port_platform_notify(dev, &cap_mask); + if (pcie_ports_auto) { + if (err) { + pcie_no_aspm(); + return 0; + } + } else { + cap_mask = PCIE_PORT_SERVICE_PME | PCIE_PORT_SERVICE_HP + | PCIE_PORT_SERVICE_VC; + if (pci_aer_available()) + cap_mask |= PCIE_PORT_SERVICE_AER; + } pos = pci_pcie_cap(dev); pci_read_config_word(dev, pos + PCI_EXP_FLAGS, ®16); /* Hot-Plug Capable */ - if (reg16 & PCI_EXP_FLAGS_SLOT) { + if ((cap_mask & PCIE_PORT_SERVICE_HP) && (reg16 & PCI_EXP_FLAGS_SLOT)) { pci_read_config_dword(dev, pos + PCI_EXP_SLTCAP, ®32); - if (reg32 & PCI_EXP_SLTCAP_HPC) + if (reg32 & PCI_EXP_SLTCAP_HPC) { services |= PCIE_PORT_SERVICE_HP; + /* + * Disable hot-plug interrupts in case they have been + * enabled by the BIOS and the hot-plug service driver + * is not loaded. + */ + pos += PCI_EXP_SLTCTL; + pci_read_config_word(dev, pos, ®16); + reg16 &= ~(PCI_EXP_SLTCTL_CCIE | PCI_EXP_SLTCTL_HPIE); + pci_write_config_word(dev, pos, reg16); + } } /* AER capable */ - if (pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ERR)) + if ((cap_mask & PCIE_PORT_SERVICE_AER) + && pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ERR)) { services |= PCIE_PORT_SERVICE_AER; + /* + * Disable AER on this port in case it's been enabled by the + * BIOS (the AER service driver will enable it when necessary). + */ + pci_disable_pcie_error_reporting(dev); + } /* VC support */ if (pci_find_ext_capability(dev, PCI_EXT_CAP_ID_VC)) services |= PCIE_PORT_SERVICE_VC; /* Root ports are capable of generating PME too */ - if (dev->pcie_type == PCI_EXP_TYPE_ROOT_PORT) + if ((cap_mask & PCIE_PORT_SERVICE_PME) + && dev->pcie_type == PCI_EXP_TYPE_ROOT_PORT) { services |= PCIE_PORT_SERVICE_PME; + /* + * Disable PME interrupt on this port in case it's been enabled + * by the BIOS (the PME service driver will enable it when + * necessary). + */ + pcie_pme_interrupt_enable(dev, false); + } return services; } @@ -494,6 +536,9 @@ static void pcie_port_shutdown_service(struct device *dev) {} */ int pcie_port_service_register(struct pcie_port_service_driver *new) { + if (pcie_ports_disabled) + return -ENODEV; + new->driver.name = (char *)new->name; new->driver.bus = &pcie_port_bus_type; new->driver.probe = pcie_port_probe_service; diff --git a/drivers/pci/pcie/portdrv_pci.c b/drivers/pci/pcie/portdrv_pci.c index 3debed25e46b..f9033e190fb6 100644 --- a/drivers/pci/pcie/portdrv_pci.c +++ b/drivers/pci/pcie/portdrv_pci.c @@ -15,6 +15,7 @@ #include <linux/pcieport_if.h> #include <linux/aer.h> #include <linux/dmi.h> +#include <linux/pci-aspm.h> #include "portdrv.h" #include "aer/aerdrv.h" @@ -29,6 +30,31 @@ MODULE_AUTHOR(DRIVER_AUTHOR); MODULE_DESCRIPTION(DRIVER_DESC); MODULE_LICENSE("GPL"); +/* If this switch is set, PCIe port native services should not be enabled. */ +bool pcie_ports_disabled; + +/* + * If this switch is set, ACPI _OSC will be used to determine whether or not to + * enable PCIe port native services. + */ +bool pcie_ports_auto = true; + +static int __init pcie_port_setup(char *str) +{ + if (!strncmp(str, "compat", 6)) { + pcie_ports_disabled = true; + } else if (!strncmp(str, "native", 6)) { + pcie_ports_disabled = false; + pcie_ports_auto = false; + } else if (!strncmp(str, "auto", 4)) { + pcie_ports_disabled = false; + pcie_ports_auto = true; + } + + return 1; +} +__setup("pcie_ports=", pcie_port_setup); + /* global data */ static int pcie_portdrv_restore_config(struct pci_dev *dev) @@ -301,6 +327,11 @@ static int __init pcie_portdrv_init(void) { int retval; + if (pcie_ports_disabled) { + pcie_no_aspm(); + return -EACCES; + } + dmi_check_system(pcie_portdrv_dmi_table); retval = pcie_port_bus_register(); @@ -315,11 +346,4 @@ static int __init pcie_portdrv_init(void) return retval; } -static void __exit pcie_portdrv_exit(void) -{ - pci_unregister_driver(&pcie_portdriver); - pcie_port_bus_unregister(); -} - module_init(pcie_portdrv_init); -module_exit(pcie_portdrv_exit); |