diff options
Diffstat (limited to 'drivers/net/wireless/ti/wlcore/conf.h')
-rw-r--r-- | drivers/net/wireless/ti/wlcore/conf.h | 237 |
1 files changed, 3 insertions, 234 deletions
diff --git a/drivers/net/wireless/ti/wlcore/conf.h b/drivers/net/wireless/ti/wlcore/conf.h index 52a9d1b14020..44d898fe0afc 100644 --- a/drivers/net/wireless/ti/wlcore/conf.h +++ b/drivers/net/wireless/ti/wlcore/conf.h @@ -110,242 +110,11 @@ enum { CONF_SG_OPPORTUNISTIC }; -enum { - /* - * Configure the min and max time BT gains the antenna - * in WLAN / BT master basic rate - * - * Range: 0 - 255 (ms) - */ - CONF_SG_ACL_BT_MASTER_MIN_BR = 0, - CONF_SG_ACL_BT_MASTER_MAX_BR, - - /* - * Configure the min and max time BT gains the antenna - * in WLAN / BT slave basic rate - * - * Range: 0 - 255 (ms) - */ - CONF_SG_ACL_BT_SLAVE_MIN_BR, - CONF_SG_ACL_BT_SLAVE_MAX_BR, - - /* - * Configure the min and max time BT gains the antenna - * in WLAN / BT master EDR - * - * Range: 0 - 255 (ms) - */ - CONF_SG_ACL_BT_MASTER_MIN_EDR, - CONF_SG_ACL_BT_MASTER_MAX_EDR, - - /* - * Configure the min and max time BT gains the antenna - * in WLAN / BT slave EDR - * - * Range: 0 - 255 (ms) - */ - CONF_SG_ACL_BT_SLAVE_MIN_EDR, - CONF_SG_ACL_BT_SLAVE_MAX_EDR, - - /* - * The maximum time WLAN can gain the antenna - * in WLAN PSM / BT master/slave BR - * - * Range: 0 - 255 (ms) - */ - CONF_SG_ACL_WLAN_PS_MASTER_BR, - CONF_SG_ACL_WLAN_PS_SLAVE_BR, - - /* - * The maximum time WLAN can gain the antenna - * in WLAN PSM / BT master/slave EDR - * - * Range: 0 - 255 (ms) - */ - CONF_SG_ACL_WLAN_PS_MASTER_EDR, - CONF_SG_ACL_WLAN_PS_SLAVE_EDR, - - /* TODO: explain these values */ - CONF_SG_ACL_WLAN_ACTIVE_MASTER_MIN_BR, - CONF_SG_ACL_WLAN_ACTIVE_MASTER_MAX_BR, - CONF_SG_ACL_WLAN_ACTIVE_SLAVE_MIN_BR, - CONF_SG_ACL_WLAN_ACTIVE_SLAVE_MAX_BR, - CONF_SG_ACL_WLAN_ACTIVE_MASTER_MIN_EDR, - CONF_SG_ACL_WLAN_ACTIVE_MASTER_MAX_EDR, - CONF_SG_ACL_WLAN_ACTIVE_SLAVE_MIN_EDR, - CONF_SG_ACL_WLAN_ACTIVE_SLAVE_MAX_EDR, - - CONF_SG_ACL_ACTIVE_SCAN_WLAN_BR, - CONF_SG_ACL_ACTIVE_SCAN_WLAN_EDR, - CONF_SG_ACL_PASSIVE_SCAN_BT_BR, - CONF_SG_ACL_PASSIVE_SCAN_WLAN_BR, - CONF_SG_ACL_PASSIVE_SCAN_BT_EDR, - CONF_SG_ACL_PASSIVE_SCAN_WLAN_EDR, - - /* - * Compensation percentage of probe requests when scan initiated - * during BT voice/ACL link. - * - * Range: 0 - 255 (%) - */ - CONF_SG_AUTO_SCAN_PROBE_REQ, - - /* - * Compensation percentage of probe requests when active scan initiated - * during BT voice - * - * Range: 0 - 255 (%) - */ - CONF_SG_ACTIVE_SCAN_DURATION_FACTOR_HV3, - - /* - * Compensation percentage of WLAN active scan window if initiated - * during BT A2DP - * - * Range: 0 - 1000 (%) - */ - CONF_SG_ACTIVE_SCAN_DURATION_FACTOR_A2DP, - - /* - * Compensation percentage of WLAN passive scan window if initiated - * during BT A2DP BR - * - * Range: 0 - 1000 (%) - */ - CONF_SG_PASSIVE_SCAN_DURATION_FACTOR_A2DP_BR, - - /* - * Compensation percentage of WLAN passive scan window if initiated - * during BT A2DP EDR - * - * Range: 0 - 1000 (%) - */ - CONF_SG_PASSIVE_SCAN_DURATION_FACTOR_A2DP_EDR, - - /* - * Compensation percentage of WLAN passive scan window if initiated - * during BT voice - * - * Range: 0 - 1000 (%) - */ - CONF_SG_PASSIVE_SCAN_DURATION_FACTOR_HV3, - - /* TODO: explain these values */ - CONF_SG_CONSECUTIVE_HV3_IN_PASSIVE_SCAN, - CONF_SG_BCN_HV3_COLLISION_THRESH_IN_PASSIVE_SCAN, - CONF_SG_TX_RX_PROTECTION_BWIDTH_IN_PASSIVE_SCAN, - - /* - * Defines whether the SG will force WLAN host to enter/exit PSM - * - * Range: 1 - SG can force, 0 - host handles PSM - */ - CONF_SG_STA_FORCE_PS_IN_BT_SCO, - - /* - * Defines antenna configuration (single/dual antenna) - * - * Range: 0 - single antenna, 1 - dual antenna - */ - CONF_SG_ANTENNA_CONFIGURATION, - - /* - * The threshold (percent) of max consecutive beacon misses before - * increasing priority of beacon reception. - * - * Range: 0 - 100 (%) - */ - CONF_SG_BEACON_MISS_PERCENT, - - /* - * Protection time of the DHCP procedure. - * - * Range: 0 - 100000 (ms) - */ - CONF_SG_DHCP_TIME, - - /* - * RX guard time before the beginning of a new BT voice frame during - * which no new WLAN trigger frame is transmitted. - * - * Range: 0 - 100000 (us) - */ - CONF_SG_RXT, - - /* - * TX guard time before the beginning of a new BT voice frame during - * which no new WLAN frame is transmitted. - * - * Range: 0 - 100000 (us) - */ - - CONF_SG_TXT, - - /* - * Enable adaptive RXT/TXT algorithm. If disabled, the host values - * will be utilized. - * - * Range: 0 - disable, 1 - enable - */ - CONF_SG_ADAPTIVE_RXT_TXT, - - /* TODO: explain this value */ - CONF_SG_GENERAL_USAGE_BIT_MAP, - - /* - * Number of consecutive BT voice frames not interrupted by WLAN - * - * Range: 0 - 100 - */ - CONF_SG_HV3_MAX_SERVED, - - /* - * The used WLAN legacy service period during active BT ACL link - * - * Range: 0 - 255 (ms) - */ - CONF_SG_PS_POLL_TIMEOUT, - - /* - * The used WLAN UPSD service period during active BT ACL link - * - * Range: 0 - 255 (ms) - */ - CONF_SG_UPSD_TIMEOUT, - - CONF_SG_CONSECUTIVE_CTS_THRESHOLD, - CONF_SG_STA_RX_WINDOW_AFTER_DTIM, - CONF_SG_STA_CONNECTION_PROTECTION_TIME, - - /* AP params */ - CONF_AP_BEACON_MISS_TX, - CONF_AP_RX_WINDOW_AFTER_BEACON, - CONF_AP_BEACON_WINDOW_INTERVAL, - CONF_AP_CONNECTION_PROTECTION_TIME, - CONF_AP_BT_ACL_VAL_BT_SERVE_TIME, - CONF_AP_BT_ACL_VAL_WL_SERVE_TIME, - - /* CTS Diluting params */ - CONF_SG_CTS_DILUTED_BAD_RX_PACKETS_TH, - CONF_SG_CTS_CHOP_IN_DUAL_ANT_SCO_MASTER, - - CONF_SG_TEMP_PARAM_1, - CONF_SG_TEMP_PARAM_2, - CONF_SG_TEMP_PARAM_3, - CONF_SG_TEMP_PARAM_4, - CONF_SG_TEMP_PARAM_5, - CONF_SG_TEMP_PARAM_6, - CONF_SG_TEMP_PARAM_7, - CONF_SG_TEMP_PARAM_8, - CONF_SG_TEMP_PARAM_9, - CONF_SG_TEMP_PARAM_10, - - CONF_SG_PARAMS_MAX, - CONF_SG_PARAMS_ALL = 0xff -}; +#define WLCORE_CONF_SG_PARAMS_MAX 67 +#define WLCORE_CONF_SG_PARAMS_ALL 0xff struct conf_sg_settings { - u32 params[CONF_SG_PARAMS_MAX]; + u32 params[WLCORE_CONF_SG_PARAMS_MAX]; u8 state; } __packed; |