summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/ethernet/intel/i40e/i40e_ethtool.c')
-rw-r--r--drivers/net/ethernet/intel/i40e/i40e_ethtool.c127
1 files changed, 64 insertions, 63 deletions
diff --git a/drivers/net/ethernet/intel/i40e/i40e_ethtool.c b/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
index 2f5bee713fef..b974482ff630 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
/*******************************************************************************
*
* Intel Ethernet Controller XL710 Family Linux Driver
@@ -230,6 +231,8 @@ static const struct i40e_priv_flags i40e_gstrings_priv_flags[] = {
I40E_PRIV_FLAG("flow-director-atr", I40E_FLAG_FD_ATR_ENABLED, 0),
I40E_PRIV_FLAG("veb-stats", I40E_FLAG_VEB_STATS_ENABLED, 0),
I40E_PRIV_FLAG("hw-atr-eviction", I40E_FLAG_HW_ATR_EVICT_ENABLED, 0),
+ I40E_PRIV_FLAG("link-down-on-close",
+ I40E_FLAG_LINK_DOWN_ON_CLOSE_ENABLED, 0),
I40E_PRIV_FLAG("legacy-rx", I40E_FLAG_LEGACY_RX, 0),
I40E_PRIV_FLAG("disable-source-pruning",
I40E_FLAG_SOURCE_PRUNING_DISABLED, 0),
@@ -857,7 +860,9 @@ static int i40e_set_link_ksettings(struct net_device *netdev,
if (hw->device_id == I40E_DEV_ID_KX_B ||
hw->device_id == I40E_DEV_ID_KX_C ||
hw->device_id == I40E_DEV_ID_20G_KR2 ||
- hw->device_id == I40E_DEV_ID_20G_KR2_A) {
+ hw->device_id == I40E_DEV_ID_20G_KR2_A ||
+ hw->device_id == I40E_DEV_ID_25G_B ||
+ hw->device_id == I40E_DEV_ID_KX_X722) {
netdev_info(netdev, "Changing settings is not supported on backplane.\n");
return -EOPNOTSUPP;
}
@@ -868,23 +873,21 @@ static int i40e_set_link_ksettings(struct net_device *netdev,
/* save autoneg out of ksettings */
autoneg = copy_ks.base.autoneg;
- memset(&safe_ks, 0, sizeof(safe_ks));
+ /* get our own copy of the bits to check against */
+ memset(&safe_ks, 0, sizeof(struct ethtool_link_ksettings));
+ safe_ks.base.cmd = copy_ks.base.cmd;
+ safe_ks.base.link_mode_masks_nwords =
+ copy_ks.base.link_mode_masks_nwords;
+ i40e_get_link_ksettings(netdev, &safe_ks);
+
/* Get link modes supported by hardware and check against modes
* requested by the user. Return an error if unsupported mode was set.
*/
- i40e_phy_type_to_ethtool(pf, &safe_ks);
if (!bitmap_subset(copy_ks.link_modes.advertising,
safe_ks.link_modes.supported,
__ETHTOOL_LINK_MODE_MASK_NBITS))
return -EINVAL;
- /* get our own copy of the bits to check against */
- memset(&safe_ks, 0, sizeof(struct ethtool_link_ksettings));
- safe_ks.base.cmd = copy_ks.base.cmd;
- safe_ks.base.link_mode_masks_nwords =
- copy_ks.base.link_mode_masks_nwords;
- i40e_get_link_ksettings(netdev, &safe_ks);
-
/* set autoneg back to what it currently is */
copy_ks.base.autoneg = safe_ks.base.autoneg;
@@ -2244,14 +2247,14 @@ static int __i40e_get_coalesce(struct net_device *netdev,
rx_ring = vsi->rx_rings[queue];
tx_ring = vsi->tx_rings[queue];
- if (ITR_IS_DYNAMIC(rx_ring->rx_itr_setting))
+ if (ITR_IS_DYNAMIC(rx_ring->itr_setting))
ec->use_adaptive_rx_coalesce = 1;
- if (ITR_IS_DYNAMIC(tx_ring->tx_itr_setting))
+ if (ITR_IS_DYNAMIC(tx_ring->itr_setting))
ec->use_adaptive_tx_coalesce = 1;
- ec->rx_coalesce_usecs = rx_ring->rx_itr_setting & ~I40E_ITR_DYNAMIC;
- ec->tx_coalesce_usecs = tx_ring->tx_itr_setting & ~I40E_ITR_DYNAMIC;
+ ec->rx_coalesce_usecs = rx_ring->itr_setting & ~I40E_ITR_DYNAMIC;
+ ec->tx_coalesce_usecs = tx_ring->itr_setting & ~I40E_ITR_DYNAMIC;
/* we use the _usecs_high to store/set the interrupt rate limit
* that the hardware supports, that almost but not quite
@@ -2311,34 +2314,35 @@ static void i40e_set_itr_per_queue(struct i40e_vsi *vsi,
struct i40e_pf *pf = vsi->back;
struct i40e_hw *hw = &pf->hw;
struct i40e_q_vector *q_vector;
- u16 vector, intrl;
+ u16 intrl;
intrl = i40e_intrl_usec_to_reg(vsi->int_rate_limit);
- rx_ring->rx_itr_setting = ec->rx_coalesce_usecs;
- tx_ring->tx_itr_setting = ec->tx_coalesce_usecs;
+ rx_ring->itr_setting = ITR_REG_ALIGN(ec->rx_coalesce_usecs);
+ tx_ring->itr_setting = ITR_REG_ALIGN(ec->tx_coalesce_usecs);
if (ec->use_adaptive_rx_coalesce)
- rx_ring->rx_itr_setting |= I40E_ITR_DYNAMIC;
+ rx_ring->itr_setting |= I40E_ITR_DYNAMIC;
else
- rx_ring->rx_itr_setting &= ~I40E_ITR_DYNAMIC;
+ rx_ring->itr_setting &= ~I40E_ITR_DYNAMIC;
if (ec->use_adaptive_tx_coalesce)
- tx_ring->tx_itr_setting |= I40E_ITR_DYNAMIC;
+ tx_ring->itr_setting |= I40E_ITR_DYNAMIC;
else
- tx_ring->tx_itr_setting &= ~I40E_ITR_DYNAMIC;
+ tx_ring->itr_setting &= ~I40E_ITR_DYNAMIC;
q_vector = rx_ring->q_vector;
- q_vector->rx.itr = ITR_TO_REG(rx_ring->rx_itr_setting);
- vector = vsi->base_vector + q_vector->v_idx;
- wr32(hw, I40E_PFINT_ITRN(I40E_RX_ITR, vector - 1), q_vector->rx.itr);
+ q_vector->rx.target_itr = ITR_TO_REG(rx_ring->itr_setting);
q_vector = tx_ring->q_vector;
- q_vector->tx.itr = ITR_TO_REG(tx_ring->tx_itr_setting);
- vector = vsi->base_vector + q_vector->v_idx;
- wr32(hw, I40E_PFINT_ITRN(I40E_TX_ITR, vector - 1), q_vector->tx.itr);
+ q_vector->tx.target_itr = ITR_TO_REG(tx_ring->itr_setting);
- wr32(hw, I40E_PFINT_RATEN(vector - 1), intrl);
+ /* The interrupt handler itself will take care of programming
+ * the Tx and Rx ITR values based on the values we have entered
+ * into the q_vector, no need to write the values now.
+ */
+
+ wr32(hw, I40E_PFINT_RATEN(q_vector->reg_idx), intrl);
i40e_flush(hw);
}
@@ -2364,11 +2368,11 @@ static int __i40e_set_coalesce(struct net_device *netdev,
vsi->work_limit = ec->tx_max_coalesced_frames_irq;
if (queue < 0) {
- cur_rx_itr = vsi->rx_rings[0]->rx_itr_setting;
- cur_tx_itr = vsi->tx_rings[0]->tx_itr_setting;
+ cur_rx_itr = vsi->rx_rings[0]->itr_setting;
+ cur_tx_itr = vsi->tx_rings[0]->itr_setting;
} else if (queue < vsi->num_queue_pairs) {
- cur_rx_itr = vsi->rx_rings[queue]->rx_itr_setting;
- cur_tx_itr = vsi->tx_rings[queue]->tx_itr_setting;
+ cur_rx_itr = vsi->rx_rings[queue]->itr_setting;
+ cur_tx_itr = vsi->tx_rings[queue]->itr_setting;
} else {
netif_info(pf, drv, netdev, "Invalid queue value, queue range is 0 - %d\n",
vsi->num_queue_pairs - 1);
@@ -2396,7 +2400,7 @@ static int __i40e_set_coalesce(struct net_device *netdev,
return -EINVAL;
}
- if (ec->rx_coalesce_usecs > (I40E_MAX_ITR << 1)) {
+ if (ec->rx_coalesce_usecs > I40E_MAX_ITR) {
netif_info(pf, drv, netdev, "Invalid value, rx-usecs range is 0-8160\n");
return -EINVAL;
}
@@ -2407,16 +2411,16 @@ static int __i40e_set_coalesce(struct net_device *netdev,
return -EINVAL;
}
- if (ec->tx_coalesce_usecs > (I40E_MAX_ITR << 1)) {
+ if (ec->tx_coalesce_usecs > I40E_MAX_ITR) {
netif_info(pf, drv, netdev, "Invalid value, tx-usecs range is 0-8160\n");
return -EINVAL;
}
if (ec->use_adaptive_rx_coalesce && !cur_rx_itr)
- ec->rx_coalesce_usecs = I40E_MIN_ITR << 1;
+ ec->rx_coalesce_usecs = I40E_MIN_ITR;
if (ec->use_adaptive_tx_coalesce && !cur_tx_itr)
- ec->tx_coalesce_usecs = I40E_MIN_ITR << 1;
+ ec->tx_coalesce_usecs = I40E_MIN_ITR;
intrl_reg = i40e_intrl_usec_to_reg(ec->rx_coalesce_usecs_high);
vsi->int_rate_limit = INTRL_REG_TO_USEC(intrl_reg);
@@ -3947,7 +3951,7 @@ static int i40e_add_fdir_ethtool(struct i40e_vsi *vsi,
if (!(pf->flags & I40E_FLAG_FD_SB_ENABLED))
return -EOPNOTSUPP;
- if (pf->flags & I40E_FLAG_FD_SB_AUTO_DISABLED)
+ if (test_bit(__I40E_FD_SB_AUTO_DISABLED, pf->state))
return -ENOSPC;
if (test_bit(__I40E_RESET_RECOVERY_PENDING, pf->state) ||
@@ -4406,6 +4410,8 @@ static int i40e_set_priv_flags(struct net_device *dev, u32 flags)
}
flags_complete:
+ changed_flags = orig_flags ^ new_flags;
+
/* Before we finalize any flag changes, we need to perform some
* checks to ensure that the changes are supported and safe.
*/
@@ -4415,38 +4421,27 @@ flags_complete:
!(pf->hw_features & I40E_HW_ATR_EVICT_CAPABLE))
return -EOPNOTSUPP;
- /* Disable FW LLDP not supported if NPAR active or if FW
- * API version < 1.7
+ /* If the driver detected FW LLDP was disabled on init, this flag could
+ * be set, however we do not support _changing_ the flag if NPAR is
+ * enabled or FW API version < 1.7. There are situations where older
+ * FW versions/NPAR enabled PFs could disable LLDP, however we _must_
+ * not allow the user to enable/disable LLDP with this flag on
+ * unsupported FW versions.
*/
- if (new_flags & I40E_FLAG_DISABLE_FW_LLDP) {
- if (pf->hw.func_caps.npar_enable) {
- dev_warn(&pf->pdev->dev,
- "Unable to stop FW LLDP if NPAR active\n");
- return -EOPNOTSUPP;
- }
-
- if (pf->hw.aq.api_maj_ver < 1 ||
- (pf->hw.aq.api_maj_ver == 1 &&
- pf->hw.aq.api_min_ver < 7)) {
+ if (changed_flags & I40E_FLAG_DISABLE_FW_LLDP) {
+ if (!(pf->hw_features & I40E_HW_STOPPABLE_FW_LLDP)) {
dev_warn(&pf->pdev->dev,
- "FW ver does not support stopping FW LLDP\n");
+ "Device does not support changing FW LLDP\n");
return -EOPNOTSUPP;
}
}
- /* Compare and exchange the new flags into place. If we failed, that
- * is if cmpxchg returns anything but the old value, this means that
- * something else has modified the flags variable since we copied it
- * originally. We'll just punt with an error and log something in the
- * message buffer.
+ /* Now that we've checked to ensure that the new flags are valid, load
+ * them into place. Since we only modify flags either (a) during
+ * initialization or (b) while holding the RTNL lock, we don't need
+ * anything fancy here.
*/
- if (cmpxchg64(&pf->flags, orig_flags, new_flags) != orig_flags) {
- dev_warn(&pf->pdev->dev,
- "Unable to update pf->flags as it was modified by another thread...\n");
- return -EAGAIN;
- }
-
- changed_flags = orig_flags ^ new_flags;
+ pf->flags = new_flags;
/* Process any additional changes needed as a result of flag changes.
* The changed_flags value reflects the list of bits that were
@@ -4456,7 +4451,7 @@ flags_complete:
/* Flush current ATR settings if ATR was disabled */
if ((changed_flags & I40E_FLAG_FD_ATR_ENABLED) &&
!(pf->flags & I40E_FLAG_FD_ATR_ENABLED)) {
- pf->flags |= I40E_FLAG_FD_ATR_AUTO_DISABLED;
+ set_bit(__I40E_FD_ATR_AUTO_DISABLED, pf->state);
set_bit(__I40E_FD_FLUSH_REQUESTED, pf->state);
}
@@ -4479,6 +4474,12 @@ flags_complete:
}
}
+ if ((changed_flags & pf->flags &
+ I40E_FLAG_LINK_DOWN_ON_CLOSE_ENABLED) &&
+ (pf->flags & I40E_FLAG_MFP_ENABLED))
+ dev_warn(&pf->pdev->dev,
+ "Turning on link-down-on-close flag may affect other partitions\n");
+
if (changed_flags & I40E_FLAG_DISABLE_FW_LLDP) {
if (pf->flags & I40E_FLAG_DISABLE_FW_LLDP) {
struct i40e_dcbx_config *dcbcfg;
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-17 22:57:44 +0000