diff options
Diffstat (limited to 'drivers/media/dvb/dvb-usb/az6027.c')
| -rw-r--r-- | drivers/media/dvb/dvb-usb/az6027.c | 26 |
1 files changed, 13 insertions, 13 deletions
diff --git a/drivers/media/dvb/dvb-usb/az6027.c b/drivers/media/dvb/dvb-usb/az6027.c index 57e2444d51ab..bf67b4dfd82b 100644 --- a/drivers/media/dvb/dvb-usb/az6027.c +++ b/drivers/media/dvb/dvb-usb/az6027.c @@ -40,7 +40,6 @@ static const struct stb0899_s1_reg az6027_stb0899_s1_init_1[] = { { STB0899_DISRX_ST0 , 0x04 }, { STB0899_DISRX_ST1 , 0x00 }, { STB0899_DISPARITY , 0x00 }, - { STB0899_DISFIFO , 0x00 }, { STB0899_DISSTATUS , 0x20 }, { STB0899_DISF22 , 0x99 }, { STB0899_DISF22RX , 0xa8 }, @@ -782,7 +781,6 @@ static int az6027_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage) { u8 buf; - int ret; struct dvb_usb_adapter *adap = fe->dvb->priv; struct i2c_msg i2c_msg = { @@ -800,17 +798,17 @@ static int az6027_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage) switch (voltage) { case SEC_VOLTAGE_13: buf = 1; - ret = i2c_transfer(&adap->dev->i2c_adap, &i2c_msg, 1); + i2c_transfer(&adap->dev->i2c_adap, &i2c_msg, 1); break; case SEC_VOLTAGE_18: buf = 2; - ret = i2c_transfer(&adap->dev->i2c_adap, &i2c_msg, 1); + i2c_transfer(&adap->dev->i2c_adap, &i2c_msg, 1); break; case SEC_VOLTAGE_OFF: buf = 0; - ret = i2c_transfer(&adap->dev->i2c_adap, &i2c_msg, 1); + i2c_transfer(&adap->dev->i2c_adap, &i2c_msg, 1); break; default: @@ -910,16 +908,16 @@ static int az6027_frontend_attach(struct dvb_usb_adapter *adap) az6027_frontend_reset(adap); deb_info("adap = %p, dev = %p\n", adap, adap->dev); - adap->fe = stb0899_attach(&az6027_stb0899_config, &adap->dev->i2c_adap); + adap->fe_adap[0].fe = stb0899_attach(&az6027_stb0899_config, &adap->dev->i2c_adap); - if (adap->fe) { + if (adap->fe_adap[0].fe) { deb_info("found STB0899 DVB-S/DVB-S2 frontend @0x%02x", az6027_stb0899_config.demod_address); - if (stb6100_attach(adap->fe, &az6027_stb6100_config, &adap->dev->i2c_adap)) { + if (stb6100_attach(adap->fe_adap[0].fe, &az6027_stb6100_config, &adap->dev->i2c_adap)) { deb_info("found STB6100 DVB-S/DVB-S2 frontend @0x%02x", az6027_stb6100_config.tuner_address); - adap->fe->ops.set_voltage = az6027_set_voltage; + adap->fe_adap[0].fe->ops.set_voltage = az6027_set_voltage; az6027_ci_init(adap); } else { - adap->fe = NULL; + adap->fe_adap[0].fe = NULL; } } else warn("no front-end attached\n"); @@ -954,7 +952,6 @@ static int az6027_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[], int n { struct dvb_usb_device *d = i2c_get_adapdata(adap); int i = 0, j = 0, len = 0; - int ret; u16 index; u16 value; int length; @@ -990,7 +987,7 @@ static int az6027_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[], int n index = (((msg[i].buf[0] << 8) & 0xff00) | (msg[i].buf[1] & 0x00ff)); value = msg[i].addr + (msg[i].len << 8); length = msg[i + 1].len + 6; - ret = az6027_usb_in_op(d, req, value, index, data, length); + az6027_usb_in_op(d, req, value, index, data, length); len = msg[i + 1].len; for (j = 0; j < len; j++) msg[i + 1].buf[j] = data[j + 5]; @@ -1017,7 +1014,7 @@ static int az6027_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[], int n index = 0x0; value = msg[i].addr; length = msg[i].len + 6; - ret = az6027_usb_in_op(d, req, value, index, data, length); + az6027_usb_in_op(d, req, value, index, data, length); len = msg[i].len; for (j = 0; j < len; j++) msg[i].buf[j] = data[j + 5]; @@ -1106,6 +1103,8 @@ static struct dvb_usb_device_properties az6027_properties = { .num_adapters = 1, .adapter = { { + .num_frontends = 1, + .fe = {{ .streaming_ctrl = az6027_streaming_ctrl, .frontend_attach = az6027_frontend_attach, @@ -1120,6 +1119,7 @@ static struct dvb_usb_device_properties az6027_properties = { } } }, + }}, } }, /* |