diff options
Diffstat (limited to 'arch')
20 files changed, 135 insertions, 19 deletions
diff --git a/arch/arm/boot/dts/mmp2-olpc-xo-1-75.dts b/arch/arm/boot/dts/mmp2-olpc-xo-1-75.dts index f1a41152e9dd..adde62d6fce7 100644 --- a/arch/arm/boot/dts/mmp2-olpc-xo-1-75.dts +++ b/arch/arm/boot/dts/mmp2-olpc-xo-1-75.dts @@ -227,12 +227,12 @@ /delete-property/ #size-cells; spi-slave; status = "okay"; - ready-gpio = <&gpio 125 GPIO_ACTIVE_HIGH>; + ready-gpios = <&gpio 125 GPIO_ACTIVE_HIGH>; slave { compatible = "olpc,xo1.75-ec"; spi-cpha; - cmd-gpio = <&gpio 155 GPIO_ACTIVE_HIGH>; + cmd-gpios = <&gpio 155 GPIO_ACTIVE_HIGH>; }; }; diff --git a/arch/arm/boot/dts/mmp3.dtsi b/arch/arm/boot/dts/mmp3.dtsi index cc4efd0efabd..4ae630d37d09 100644 --- a/arch/arm/boot/dts/mmp3.dtsi +++ b/arch/arm/boot/dts/mmp3.dtsi @@ -296,6 +296,7 @@ interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; clocks = <&soc_clocks MMP2_CLK_CCIC0>; clock-names = "axi"; + power-domains = <&soc_clocks MMP3_POWER_DOMAIN_CAMERA>; #clock-cells = <0>; clock-output-names = "mclk"; status = "disabled"; @@ -307,6 +308,7 @@ interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; clocks = <&soc_clocks MMP2_CLK_CCIC1>; clock-names = "axi"; + power-domains = <&soc_clocks MMP3_POWER_DOMAIN_CAMERA>; #clock-cells = <0>; clock-output-names = "mclk"; status = "disabled"; diff --git a/arch/arm/boot/dts/stm32mp157c-ed1.dts b/arch/arm/boot/dts/stm32mp157c-ed1.dts index ca109dc18238..2e77ccec3fc1 100644 --- a/arch/arm/boot/dts/stm32mp157c-ed1.dts +++ b/arch/arm/boot/dts/stm32mp157c-ed1.dts @@ -89,6 +89,14 @@ states = <1800000 0x1>, <2900000 0x0>; }; + + vin: vin { + compatible = "regulator-fixed"; + regulator-name = "vin"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; }; &adc { @@ -150,11 +158,18 @@ regulators { compatible = "st,stpmic1-regulators"; + buck1-supply = <&vin>; + buck2-supply = <&vin>; + buck3-supply = <&vin>; + buck4-supply = <&vin>; ldo1-supply = <&v3v3>; ldo2-supply = <&v3v3>; ldo3-supply = <&vdd_ddr>; + ldo4-supply = <&vin>; ldo5-supply = <&v3v3>; ldo6-supply = <&v3v3>; + vref_ddr-supply = <&vin>; + boost-supply = <&vin>; pwr_sw1-supply = <&bst_out>; pwr_sw2-supply = <&bst_out>; diff --git a/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi b/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi index a5307745719a..93398cfae97e 100644 --- a/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi +++ b/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi @@ -80,6 +80,14 @@ dais = <&sai2a_port &sai2b_port &i2s2_port>; status = "okay"; }; + + vin: vin { + compatible = "regulator-fixed"; + regulator-name = "vin"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; }; &adc { @@ -240,9 +248,18 @@ regulators { compatible = "st,stpmic1-regulators"; + buck1-supply = <&vin>; + buck2-supply = <&vin>; + buck3-supply = <&vin>; + buck4-supply = <&vin>; ldo1-supply = <&v3v3>; + ldo2-supply = <&vin>; ldo3-supply = <&vdd_ddr>; + ldo4-supply = <&vin>; + ldo5-supply = <&vin>; ldo6-supply = <&v3v3>; + vref_ddr-supply = <&vin>; + boost-supply = <&vin>; pwr_sw1-supply = <&bst_out>; pwr_sw2-supply = <&bst_out>; diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi index 0f95a6ef8543..1c5a666c54b5 100644 --- a/arch/arm/boot/dts/sun4i-a10.dtsi +++ b/arch/arm/boot/dts/sun4i-a10.dtsi @@ -143,7 +143,7 @@ trips { cpu_alert0: cpu-alert0 { /* milliCelsius */ - temperature = <850000>; + temperature = <85000>; hysteresis = <2000>; type = "passive"; }; diff --git a/arch/arm/configs/imx_v4_v5_defconfig b/arch/arm/configs/imx_v4_v5_defconfig index aeb1209e0804..bb70acc6b526 100644 --- a/arch/arm/configs/imx_v4_v5_defconfig +++ b/arch/arm/configs/imx_v4_v5_defconfig @@ -93,6 +93,7 @@ CONFIG_SPI=y CONFIG_SPI_IMX=y CONFIG_SPI_SPIDEV=y CONFIG_GPIO_SYSFS=y +CONFIG_GPIO_MXC=y CONFIG_W1=y CONFIG_W1_MASTER_MXC=y CONFIG_W1_SLAVE_THERM=y diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig index 0fa79bd00219..221f5c340c86 100644 --- a/arch/arm/configs/imx_v6_v7_defconfig +++ b/arch/arm/configs/imx_v6_v7_defconfig @@ -217,6 +217,7 @@ CONFIG_GPIO_PCA953X=y CONFIG_GPIO_PCF857X=y CONFIG_GPIO_STMPE=y CONFIG_GPIO_74X164=y +CONFIG_GPIO_MXC=y CONFIG_POWER_RESET=y CONFIG_POWER_RESET_SYSCON=y CONFIG_POWER_RESET_SYSCON_POWEROFF=y diff --git a/arch/arm/configs/multi_v5_defconfig b/arch/arm/configs/multi_v5_defconfig index 70b709a669d2..e00be9faa23b 100644 --- a/arch/arm/configs/multi_v5_defconfig +++ b/arch/arm/configs/multi_v5_defconfig @@ -166,6 +166,7 @@ CONFIG_SPI_IMX=y CONFIG_SPI_ORION=y CONFIG_GPIO_ASPEED=m CONFIG_GPIO_ASPEED_SGPIO=y +CONFIG_GPIO_MXC=y CONFIG_POWER_RESET=y CONFIG_POWER_RESET_GPIO=y CONFIG_POWER_RESET_QNAP=y diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig index e731cdf7c88c..a611b0c1e540 100644 --- a/arch/arm/configs/multi_v7_defconfig +++ b/arch/arm/configs/multi_v7_defconfig @@ -465,6 +465,7 @@ CONFIG_GPIO_PALMAS=y CONFIG_GPIO_TPS6586X=y CONFIG_GPIO_TPS65910=y CONFIG_GPIO_TWL4030=y +CONFIG_GPIO_MXC=y CONFIG_POWER_AVS=y CONFIG_ROCKCHIP_IODOMAIN=y CONFIG_POWER_RESET_AS3722=y diff --git a/arch/arm/mach-mvebu/coherency_ll.S b/arch/arm/mach-mvebu/coherency_ll.S index 2d962fe48821..a3a64bf97250 100644 --- a/arch/arm/mach-mvebu/coherency_ll.S +++ b/arch/arm/mach-mvebu/coherency_ll.S @@ -35,13 +35,8 @@ ENTRY(ll_get_coherency_base) /* * MMU is disabled, use the physical address of the coherency - * base address. However, if the coherency fabric isn't mapped - * (i.e its virtual address is zero), it means coherency is - * not enabled, so we return 0. + * base address, (or 0x0 if the coherency fabric is not mapped) */ - ldr r1, =coherency_base - cmp r1, #0 - beq 2f adr r1, 3f ldr r3, [r1] ldr r1, [r1, r3] diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms index 6f2494dd6d60..5c4ac1c9f4e0 100644 --- a/arch/arm64/Kconfig.platforms +++ b/arch/arm64/Kconfig.platforms @@ -54,6 +54,7 @@ config ARCH_BCM_IPROC config ARCH_BERLIN bool "Marvell Berlin SoC Family" select DW_APB_ICTL + select DW_APB_TIMER_OF select GPIOLIB select PINCTRL help diff --git a/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts b/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts index cb1360ae1211..7740f97c240f 100644 --- a/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts +++ b/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts @@ -584,3 +584,9 @@ pinctrl-0 = <&uart_ao_a_pins>; pinctrl-names = "default"; }; + +&usb { + status = "okay"; + dr_mode = "otg"; + vbus-supply = <&usb_pwr>; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi index b9efc8469265..724ee179b316 100644 --- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi @@ -171,6 +171,46 @@ #size-cells = <2>; ranges; + usb: usb@ffe09080 { + compatible = "amlogic,meson-axg-usb-ctrl"; + reg = <0x0 0xffe09080 0x0 0x20>; + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clocks = <&clkc CLKID_USB>, <&clkc CLKID_USB1_DDR_BRIDGE>; + clock-names = "usb_ctrl", "ddr"; + resets = <&reset RESET_USB_OTG>; + + dr_mode = "otg"; + + phys = <&usb2_phy1>; + phy-names = "usb2-phy1"; + + dwc2: usb@ff400000 { + compatible = "amlogic,meson-g12a-usb", "snps,dwc2"; + reg = <0x0 0xff400000 0x0 0x40000>; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clkc CLKID_USB1>; + clock-names = "otg"; + phys = <&usb2_phy1>; + dr_mode = "peripheral"; + g-rx-fifo-size = <192>; + g-np-tx-fifo-size = <128>; + g-tx-fifo-size = <128 128 16 16 16>; + }; + + dwc3: usb@ff500000 { + compatible = "snps,dwc3"; + reg = <0x0 0xff500000 0x0 0x100000>; + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + dr_mode = "host"; + maximum-speed = "high-speed"; + snps,dis_u2_susphy_quirk; + }; + }; + ethmac: ethernet@ff3f0000 { compatible = "amlogic,meson-axg-dwmac", "snps,dwmac-3.70a", @@ -187,6 +227,8 @@ "timing-adjustment"; rx-fifo-depth = <4096>; tx-fifo-depth = <2048>; + resets = <&reset RESET_ETHERNET>; + reset-names = "stmmaceth"; status = "disabled"; }; @@ -1734,6 +1776,16 @@ clock-names = "core", "clkin0", "clkin1"; resets = <&reset RESET_SD_EMMC_C>; }; + + usb2_phy1: phy@9020 { + compatible = "amlogic,meson-gxl-usb2-phy"; + #phy-cells = <0>; + reg = <0x0 0x9020 0x0 0x20>; + clocks = <&clkc CLKID_USB>; + clock-names = "phy"; + resets = <&reset RESET_USB_OTG>; + reset-names = "phy"; + }; }; sram: sram@fffc0000 { diff --git a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi index 1e83ec5b8c91..8514fe6a275a 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi @@ -209,7 +209,7 @@ }; ethmac: ethernet@ff3f0000 { - compatible = "amlogic,meson-axg-dwmac", + compatible = "amlogic,meson-g12a-dwmac", "snps,dwmac-3.70a", "snps,dwmac"; reg = <0x0 0xff3f0000 0x0 0x10000>, @@ -224,6 +224,8 @@ "timing-adjustment"; rx-fifo-depth = <4096>; tx-fifo-depth = <2048>; + resets = <&reset RESET_ETHERNET>; + reset-names = "stmmaceth"; status = "disabled"; mdio0: mdio { @@ -282,6 +284,8 @@ hwrng: rng@218 { compatible = "amlogic,meson-rng"; reg = <0x0 0x218 0x0 0x4>; + clocks = <&clkc CLKID_RNG0>; + clock-names = "core"; }; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2-plus.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2-plus.dts index 5de2815ba99d..ce1198ad34e4 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2-plus.dts +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2-plus.dts @@ -19,7 +19,7 @@ regulator-min-microvolt = <680000>; regulator-max-microvolt = <1040000>; - pwms = <&pwm_AO_cd 1 1500 0>; + pwms = <&pwm_ab 0 1500 0>; }; &vddcpu_b { diff --git a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi index 0edd137151f8..726b91d3a905 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi @@ -13,6 +13,7 @@ #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/power/meson-gxbb-power.h> +#include <dt-bindings/reset/amlogic,meson-gxbb-reset.h> #include <dt-bindings/thermal/thermal.h> / { @@ -575,6 +576,8 @@ interrupt-names = "macirq"; rx-fifo-depth = <4096>; tx-fifo-depth = <2048>; + resets = <&reset RESET_ETHERNET>; + reset-names = "stmmaceth"; power-domains = <&pwrc PWRC_GXBB_ETHERNET_MEM_ID>; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7-emmc.dts b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7-emmc.dts index 03733fd92732..215d2f702623 100644 --- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7-emmc.dts +++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7-emmc.dts @@ -20,17 +20,23 @@ compatible = "globalscale,espressobin-v7-emmc", "globalscale,espressobin-v7", "globalscale,espressobin", "marvell,armada3720", "marvell,armada3710"; + + aliases { + /* ethernet1 is wan port */ + ethernet1 = &switch0port3; + ethernet3 = &switch0port1; + }; }; &switch0 { ports { - port@1 { + switch0port1: port@1 { reg = <1>; label = "lan1"; phy-handle = <&switch0phy0>; }; - port@3 { + switch0port3: port@3 { reg = <3>; label = "wan"; phy-handle = <&switch0phy2>; diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7.dts b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7.dts index 8570c5f47d7d..b6f4af8ebafb 100644 --- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7.dts +++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7.dts @@ -19,17 +19,23 @@ model = "Globalscale Marvell ESPRESSOBin Board V7"; compatible = "globalscale,espressobin-v7", "globalscale,espressobin", "marvell,armada3720", "marvell,armada3710"; + + aliases { + /* ethernet1 is wan port */ + ethernet1 = &switch0port3; + ethernet3 = &switch0port1; + }; }; &switch0 { ports { - port@1 { + switch0port1: port@1 { reg = <1>; label = "lan1"; phy-handle = <&switch0phy0>; }; - port@3 { + switch0port3: port@3 { reg = <3>; label = "wan"; phy-handle = <&switch0phy2>; diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dtsi b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dtsi index b97218c72727..0775c16e0ec8 100644 --- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dtsi @@ -13,6 +13,10 @@ / { aliases { ethernet0 = ð0; + /* for dsa slave device */ + ethernet1 = &switch0port1; + ethernet2 = &switch0port2; + ethernet3 = &switch0port3; serial0 = &uart0; serial1 = &uart1; }; @@ -120,7 +124,7 @@ #address-cells = <1>; #size-cells = <0>; - port@0 { + switch0port0: port@0 { reg = <0>; label = "cpu"; ethernet = <ð0>; @@ -131,19 +135,19 @@ }; }; - port@1 { + switch0port1: port@1 { reg = <1>; label = "wan"; phy-handle = <&switch0phy0>; }; - port@2 { + switch0port2: port@2 { reg = <2>; label = "lan0"; phy-handle = <&switch0phy1>; }; - port@3 { + switch0port3: port@3 { reg = <3>; label = "lan1"; phy-handle = <&switch0phy2>; diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig index 17a2df6a263e..5cfe3cf6f2ac 100644 --- a/arch/arm64/configs/defconfig +++ b/arch/arm64/configs/defconfig @@ -500,6 +500,7 @@ CONFIG_GPIO_ALTERA=m CONFIG_GPIO_DWAPB=y CONFIG_GPIO_MB86S7X=y CONFIG_GPIO_MPC8XXX=y +CONFIG_GPIO_MXC=y CONFIG_GPIO_PL061=y CONFIG_GPIO_RCAR=y CONFIG_GPIO_UNIPHIER=y |