summaryrefslogtreecommitdiff
path: root/arch/powerpc/platforms
diff options
context:
space:
mode:
Diffstat (limited to 'arch/powerpc/platforms')
-rw-r--r--arch/powerpc/platforms/83xx/mpc831x_rdb.c2
-rw-r--r--arch/powerpc/platforms/83xx/mpc832x_mds.c9
-rw-r--r--arch/powerpc/platforms/83xx/mpc832x_rdb.c5
-rw-r--r--arch/powerpc/platforms/83xx/mpc836x_mds.c81
-rw-r--r--arch/powerpc/platforms/83xx/mpc836x_rdk.c6
-rw-r--r--arch/powerpc/platforms/83xx/mpc837x_mds.c1
-rw-r--r--arch/powerpc/platforms/83xx/mpc837x_rdb.c2
-rw-r--r--arch/powerpc/platforms/83xx/mpc83xx.h1
-rw-r--r--arch/powerpc/platforms/85xx/mpc85xx_ds.c7
-rw-r--r--arch/powerpc/platforms/85xx/smp.c1
-rw-r--r--arch/powerpc/platforms/Kconfig11
-rw-r--r--arch/powerpc/platforms/Kconfig.cputype2
12 files changed, 111 insertions, 17 deletions
diff --git a/arch/powerpc/platforms/83xx/mpc831x_rdb.c b/arch/powerpc/platforms/83xx/mpc831x_rdb.c
index a428f8d1ac80..5177bdd2c62a 100644
--- a/arch/powerpc/platforms/83xx/mpc831x_rdb.c
+++ b/arch/powerpc/platforms/83xx/mpc831x_rdb.c
@@ -42,7 +42,7 @@ static void __init mpc831x_rdb_setup_arch(void)
mpc831x_usb_cfg();
}
-void __init mpc831x_rdb_init_IRQ(void)
+static void __init mpc831x_rdb_init_IRQ(void)
{
struct device_node *np;
diff --git a/arch/powerpc/platforms/83xx/mpc832x_mds.c b/arch/powerpc/platforms/83xx/mpc832x_mds.c
index ec43477caa63..ec0b401bc9cf 100644
--- a/arch/powerpc/platforms/83xx/mpc832x_mds.c
+++ b/arch/powerpc/platforms/83xx/mpc832x_mds.c
@@ -49,8 +49,6 @@
#define DBG(fmt...)
#endif
-static u8 *bcsr_regs = NULL;
-
/* ************************************************************************
*
* Setup the architecture
@@ -59,13 +57,14 @@ static u8 *bcsr_regs = NULL;
static void __init mpc832x_sys_setup_arch(void)
{
struct device_node *np;
+ u8 __iomem *bcsr_regs = NULL;
if (ppc_md.progress)
ppc_md.progress("mpc832x_sys_setup_arch()", 0);
/* Map BCSR area */
np = of_find_node_by_name(NULL, "bcsr");
- if (np != 0) {
+ if (np) {
struct resource res;
of_address_to_resource(np, 0, &res);
@@ -93,9 +92,9 @@ static void __init mpc832x_sys_setup_arch(void)
!= NULL){
/* Reset the Ethernet PHYs */
#define BCSR8_FETH_RST 0x50
- bcsr_regs[8] &= ~BCSR8_FETH_RST;
+ clrbits8(&bcsr_regs[8], BCSR8_FETH_RST);
udelay(1000);
- bcsr_regs[8] |= BCSR8_FETH_RST;
+ setbits8(&bcsr_regs[8], BCSR8_FETH_RST);
iounmap(bcsr_regs);
of_node_put(np);
}
diff --git a/arch/powerpc/platforms/83xx/mpc832x_rdb.c b/arch/powerpc/platforms/83xx/mpc832x_rdb.c
index 0300268ce5b8..2a1295f19832 100644
--- a/arch/powerpc/platforms/83xx/mpc832x_rdb.c
+++ b/arch/powerpc/platforms/83xx/mpc832x_rdb.c
@@ -38,6 +38,7 @@
#define DBG(fmt...)
#endif
+#ifdef CONFIG_QUICC_ENGINE
static void mpc83xx_spi_activate_cs(u8 cs, u8 polarity)
{
pr_debug("%s %d %d\n", __func__, cs, polarity);
@@ -77,8 +78,8 @@ static int __init mpc832x_spi_init(void)
mpc83xx_spi_activate_cs,
mpc83xx_spi_deactivate_cs);
}
-
machine_device_initcall(mpc832x_rdb, mpc832x_spi_init);
+#endif /* CONFIG_QUICC_ENGINE */
/* ************************************************************************
*
@@ -130,7 +131,7 @@ static int __init mpc832x_declare_of_platform_devices(void)
}
machine_device_initcall(mpc832x_rdb, mpc832x_declare_of_platform_devices);
-void __init mpc832x_rdb_init_IRQ(void)
+static void __init mpc832x_rdb_init_IRQ(void)
{
struct device_node *np;
diff --git a/arch/powerpc/platforms/83xx/mpc836x_mds.c b/arch/powerpc/platforms/83xx/mpc836x_mds.c
index 9d46e5bdd101..09e9d6fb7411 100644
--- a/arch/powerpc/platforms/83xx/mpc836x_mds.c
+++ b/arch/powerpc/platforms/83xx/mpc836x_mds.c
@@ -18,6 +18,7 @@
#include <linux/stddef.h>
#include <linux/kernel.h>
+#include <linux/compiler.h>
#include <linux/init.h>
#include <linux/errno.h>
#include <linux/reboot.h>
@@ -43,6 +44,7 @@
#include <asm/udbg.h>
#include <sysdev/fsl_soc.h>
#include <sysdev/fsl_pci.h>
+#include <sysdev/simple_gpio.h>
#include <asm/qe.h>
#include <asm/qe_ic.h>
@@ -55,8 +57,6 @@
#define DBG(fmt...)
#endif
-static u8 *bcsr_regs = NULL;
-
/* ************************************************************************
*
* Setup the architecture
@@ -65,13 +65,14 @@ static u8 *bcsr_regs = NULL;
static void __init mpc836x_mds_setup_arch(void)
{
struct device_node *np;
+ u8 __iomem *bcsr_regs = NULL;
if (ppc_md.progress)
ppc_md.progress("mpc836x_mds_setup_arch()", 0);
/* Map BCSR area */
np = of_find_node_by_name(NULL, "bcsr");
- if (np != 0) {
+ if (np) {
struct resource res;
of_address_to_resource(np, 0, &res);
@@ -93,6 +94,16 @@ static void __init mpc836x_mds_setup_arch(void)
for (np = NULL; (np = of_find_node_by_name(np, "ucc")) != NULL;)
par_io_of_config(np);
+#ifdef CONFIG_QE_USB
+ /* Must fixup Par IO before QE GPIO chips are registered. */
+ par_io_config_pin(1, 2, 1, 0, 3, 0); /* USBOE */
+ par_io_config_pin(1, 3, 1, 0, 3, 0); /* USBTP */
+ par_io_config_pin(1, 8, 1, 0, 1, 0); /* USBTN */
+ par_io_config_pin(1, 10, 2, 0, 3, 0); /* USBRXD */
+ par_io_config_pin(1, 9, 2, 1, 3, 0); /* USBRP */
+ par_io_config_pin(1, 11, 2, 1, 3, 0); /* USBRN */
+ par_io_config_pin(2, 20, 2, 0, 1, 0); /* CLK21 */
+#endif /* CONFIG_QE_USB */
}
if ((np = of_find_compatible_node(NULL, "network", "ucc_geth"))
@@ -151,6 +162,70 @@ static int __init mpc836x_declare_of_platform_devices(void)
}
machine_device_initcall(mpc836x_mds, mpc836x_declare_of_platform_devices);
+#ifdef CONFIG_QE_USB
+static int __init mpc836x_usb_cfg(void)
+{
+ u8 __iomem *bcsr;
+ struct device_node *np;
+ const char *mode;
+ int ret = 0;
+
+ np = of_find_compatible_node(NULL, NULL, "fsl,mpc8360mds-bcsr");
+ if (!np)
+ return -ENODEV;
+
+ bcsr = of_iomap(np, 0);
+ of_node_put(np);
+ if (!bcsr)
+ return -ENOMEM;
+
+ np = of_find_compatible_node(NULL, NULL, "fsl,mpc8323-qe-usb");
+ if (!np) {
+ ret = -ENODEV;
+ goto err;
+ }
+
+#define BCSR8_TSEC1M_MASK (0x3 << 6)
+#define BCSR8_TSEC1M_RGMII (0x0 << 6)
+#define BCSR8_TSEC2M_MASK (0x3 << 4)
+#define BCSR8_TSEC2M_RGMII (0x0 << 4)
+ /*
+ * Default is GMII (2), but we should set it to RGMII (0) if we use
+ * USB (Eth PHY is in RGMII mode anyway).
+ */
+ clrsetbits_8(&bcsr[8], BCSR8_TSEC1M_MASK | BCSR8_TSEC2M_MASK,
+ BCSR8_TSEC1M_RGMII | BCSR8_TSEC2M_RGMII);
+
+#define BCSR13_USBMASK 0x0f
+#define BCSR13_nUSBEN 0x08 /* 1 - Disable, 0 - Enable */
+#define BCSR13_USBSPEED 0x04 /* 1 - Full, 0 - Low */
+#define BCSR13_USBMODE 0x02 /* 1 - Host, 0 - Function */
+#define BCSR13_nUSBVCC 0x01 /* 1 - gets VBUS, 0 - supplies VBUS */
+
+ clrsetbits_8(&bcsr[13], BCSR13_USBMASK, BCSR13_USBSPEED);
+
+ mode = of_get_property(np, "mode", NULL);
+ if (mode && !strcmp(mode, "peripheral")) {
+ setbits8(&bcsr[13], BCSR13_nUSBVCC);
+ qe_usb_clock_set(QE_CLK21, 48000000);
+ } else {
+ setbits8(&bcsr[13], BCSR13_USBMODE);
+ /*
+ * The BCSR GPIOs are used to control power and
+ * speed of the USB transceiver. This is needed for
+ * the USB Host only.
+ */
+ simple_gpiochip_init("fsl,mpc8360mds-bcsr-gpio");
+ }
+
+ of_node_put(np);
+err:
+ iounmap(bcsr);
+ return ret;
+}
+machine_arch_initcall(mpc836x_mds, mpc836x_usb_cfg);
+#endif /* CONFIG_QE_USB */
+
static void __init mpc836x_mds_init_IRQ(void)
{
struct device_node *np;
diff --git a/arch/powerpc/platforms/83xx/mpc836x_rdk.c b/arch/powerpc/platforms/83xx/mpc836x_rdk.c
index a5273bb28e1b..b0090aac9642 100644
--- a/arch/powerpc/platforms/83xx/mpc836x_rdk.c
+++ b/arch/powerpc/platforms/83xx/mpc836x_rdk.c
@@ -51,8 +51,9 @@ static void __init mpc836x_rdk_setup_arch(void)
for_each_compatible_node(np, "pci", "fsl,mpc8349-pci")
mpc83xx_add_bridge(np);
#endif
-
+#ifdef CONFIG_QUICC_ENGINE
qe_reset();
+#endif
}
static void __init mpc836x_rdk_init_IRQ(void)
@@ -71,13 +72,14 @@ static void __init mpc836x_rdk_init_IRQ(void)
*/
ipic_set_default_priority();
of_node_put(np);
-
+#ifdef CONFIG_QUICC_ENGINE
np = of_find_compatible_node(NULL, NULL, "fsl,qe-ic");
if (!np)
return;
qe_ic_init(np, 0, qe_ic_cascade_low_ipic, qe_ic_cascade_high_ipic);
of_node_put(np);
+#endif
}
/*
diff --git a/arch/powerpc/platforms/83xx/mpc837x_mds.c b/arch/powerpc/platforms/83xx/mpc837x_mds.c
index 8bb13c807142..530ef990ca7c 100644
--- a/arch/powerpc/platforms/83xx/mpc837x_mds.c
+++ b/arch/powerpc/platforms/83xx/mpc837x_mds.c
@@ -26,7 +26,6 @@
#define BCSR12_USB_SER_MASK 0x8a
#define BCSR12_USB_SER_PIN 0x80
#define BCSR12_USB_SER_DEVICE 0x02
-extern int mpc837x_usb_cfg(void);
static int mpc837xmds_usb_cfg(void)
{
diff --git a/arch/powerpc/platforms/83xx/mpc837x_rdb.c b/arch/powerpc/platforms/83xx/mpc837x_rdb.c
index da030afa2e2c..1d096545322b 100644
--- a/arch/powerpc/platforms/83xx/mpc837x_rdb.c
+++ b/arch/powerpc/platforms/83xx/mpc837x_rdb.c
@@ -21,8 +21,6 @@
#include "mpc83xx.h"
-extern int mpc837x_usb_cfg(void);
-
/* ************************************************************************
*
* Setup the architecture
diff --git a/arch/powerpc/platforms/83xx/mpc83xx.h b/arch/powerpc/platforms/83xx/mpc83xx.h
index 2a7cbabb410a..83cfe51526ec 100644
--- a/arch/powerpc/platforms/83xx/mpc83xx.h
+++ b/arch/powerpc/platforms/83xx/mpc83xx.h
@@ -61,6 +61,7 @@
extern void mpc83xx_restart(char *cmd);
extern long mpc83xx_time_init(void);
+extern int mpc837x_usb_cfg(void);
extern int mpc834x_usb_cfg(void);
extern int mpc831x_usb_cfg(void);
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_ds.c b/arch/powerpc/platforms/85xx/mpc85xx_ds.c
index a8301c8ad537..7326d904202c 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_ds.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_ds.c
@@ -148,6 +148,9 @@ static int mpc85xx_exclude_device(struct pci_controller *hose,
/*
* Setup the architecture
*/
+#ifdef CONFIG_SMP
+extern void __init mpc85xx_smp_init(void);
+#endif
static void __init mpc85xx_ds_setup_arch(void)
{
#ifdef CONFIG_PCI
@@ -173,6 +176,10 @@ static void __init mpc85xx_ds_setup_arch(void)
ppc_md.pci_exclude_device = mpc85xx_exclude_device;
#endif
+#ifdef CONFIG_SMP
+ mpc85xx_smp_init();
+#endif
+
printk("MPC85xx DS board from Freescale Semiconductor\n");
}
diff --git a/arch/powerpc/platforms/85xx/smp.c b/arch/powerpc/platforms/85xx/smp.c
index d652c713f496..79a0df17078b 100644
--- a/arch/powerpc/platforms/85xx/smp.c
+++ b/arch/powerpc/platforms/85xx/smp.c
@@ -58,6 +58,7 @@ smp_85xx_kick_cpu(int nr)
if (cpu_rel_addr == NULL) {
printk(KERN_ERR "No cpu-release-addr for cpu %d\n", nr);
+ local_irq_restore(flags);
return;
}
diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig
index 47e956c871fe..47fe2bea9865 100644
--- a/arch/powerpc/platforms/Kconfig
+++ b/arch/powerpc/platforms/Kconfig
@@ -312,4 +312,15 @@ config MPC8xxx_GPIO
Say Y here if you're going to use hardware that connects to the
MPC831x/834x/837x/8572/8610 GPIOs.
+config SIMPLE_GPIO
+ bool "Support for simple, memory-mapped GPIO controllers"
+ depends on PPC
+ select GENERIC_GPIO
+ select ARCH_REQUIRE_GPIOLIB
+ help
+ Say Y here to support simple, memory-mapped GPIO controllers.
+ These are usually BCSRs used to control board's switches, LEDs,
+ chip-selects, Ethernet/USB PHY's power and various other small
+ on-board peripherals.
+
endmenu
diff --git a/arch/powerpc/platforms/Kconfig.cputype b/arch/powerpc/platforms/Kconfig.cputype
index 3d0c776f888d..e868b5c50723 100644
--- a/arch/powerpc/platforms/Kconfig.cputype
+++ b/arch/powerpc/platforms/Kconfig.cputype
@@ -231,7 +231,7 @@ config VIRT_CPU_ACCOUNTING
If in doubt, say Y here.
config SMP
- depends on PPC_STD_MMU
+ depends on PPC_STD_MMU || FSL_BOOKE
bool "Symmetric multi-processing support"
---help---
This enables support for systems with more than one CPU. If you have
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-13 21:36:25 +0000