summaryrefslogtreecommitdiff
path: root/arch/blackfin/mach-bf548
diff options
context:
space:
mode:
Diffstat (limited to 'arch/blackfin/mach-bf548')
-rw-r--r--arch/blackfin/mach-bf548/boards/cm_bf548.c22
-rw-r--r--arch/blackfin/mach-bf548/boards/ezkit.c58
-rw-r--r--arch/blackfin/mach-bf548/head.S52
-rw-r--r--arch/blackfin/mach-bf548/include/mach/anomaly.h93
-rw-r--r--arch/blackfin/mach-bf548/include/mach/bf548.h25
-rw-r--r--arch/blackfin/mach-bf548/include/mach/mem_map.h14
6 files changed, 177 insertions, 87 deletions
diff --git a/arch/blackfin/mach-bf548/boards/cm_bf548.c b/arch/blackfin/mach-bf548/boards/cm_bf548.c
index ce934ee174e0..24192aaa9275 100644
--- a/arch/blackfin/mach-bf548/boards/cm_bf548.c
+++ b/arch/blackfin/mach-bf548/boards/cm_bf548.c
@@ -36,11 +36,8 @@
#include <linux/spi/flash.h>
#include <linux/irq.h>
#include <linux/interrupt.h>
-#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
#include <linux/usb/musb.h>
-#endif
#include <asm/bfin5xx_spi.h>
-#include <asm/cplb.h>
#include <asm/dma.h>
#include <asm/gpio.h>
#include <asm/nand.h>
@@ -175,6 +172,7 @@ static struct resource bfin_uart_resources[] = {
{
.start = 0xFFC03100,
.end = 0xFFC031FF,
+ .flags = IORESOURCE_MEM,
},
#endif
};
@@ -268,6 +266,16 @@ static struct resource musb_resources[] = {
},
};
+static struct musb_hdrc_config musb_config = {
+ .multipoint = 0,
+ .dyn_fifo = 0,
+ .soft_con = 1,
+ .dma = 1,
+ .num_eps = 7,
+ .dma_channels = 7,
+ .gpio_vrsel = GPIO_PH6,
+};
+
static struct musb_hdrc_platform_data musb_plat = {
#if defined(CONFIG_USB_MUSB_OTG)
.mode = MUSB_OTG,
@@ -276,7 +284,7 @@ static struct musb_hdrc_platform_data musb_plat = {
#elif defined(CONFIG_USB_GADGET_MUSB_HDRC)
.mode = MUSB_PERIPHERAL,
#endif
- .multipoint = 0,
+ .config = &musb_config,
};
static u64 musb_dmamask = ~(u32)0;
@@ -321,12 +329,12 @@ static struct mtd_partition partition_info[] = {
{
.name = "linux kernel(nand)",
.offset = 0,
- .size = 4 * SIZE_1M,
+ .size = 4 * 1024 * 1024,
},
{
.name = "file system(nand)",
- .offset = 4 * SIZE_1M,
- .size = (256 - 4) * SIZE_1M,
+ .offset = 4 * 1024 * 1024,
+ .size = (256 - 4) * 1024 * 1024,
},
};
diff --git a/arch/blackfin/mach-bf548/boards/ezkit.c b/arch/blackfin/mach-bf548/boards/ezkit.c
index 39357693046d..5288187a3ace 100644
--- a/arch/blackfin/mach-bf548/boards/ezkit.c
+++ b/arch/blackfin/mach-bf548/boards/ezkit.c
@@ -38,11 +38,8 @@
#include <linux/irq.h>
#include <linux/i2c.h>
#include <linux/interrupt.h>
-#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
#include <linux/usb/musb.h>
-#endif
#include <asm/bfin5xx_spi.h>
-#include <asm/cplb.h>
#include <asm/dma.h>
#include <asm/gpio.h>
#include <asm/nand.h>
@@ -186,6 +183,37 @@ static struct platform_device bf54x_kpad_device = {
};
#endif
+#if defined(CONFIG_JOYSTICK_BFIN_ROTARY) || defined(CONFIG_JOYSTICK_BFIN_ROTARY_MODULE)
+#include <asm/bfin_rotary.h>
+
+static struct bfin_rotary_platform_data bfin_rotary_data = {
+ /*.rotary_up_key = KEY_UP,*/
+ /*.rotary_down_key = KEY_DOWN,*/
+ .rotary_rel_code = REL_WHEEL,
+ .rotary_button_key = KEY_ENTER,
+ .debounce = 10, /* 0..17 */
+ .mode = ROT_QUAD_ENC | ROT_DEBE,
+};
+
+static struct resource bfin_rotary_resources[] = {
+ {
+ .start = IRQ_CNT,
+ .end = IRQ_CNT,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device bfin_rotary_device = {
+ .name = "bfin-rotary",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(bfin_rotary_resources),
+ .resource = bfin_rotary_resources,
+ .dev = {
+ .platform_data = &bfin_rotary_data,
+ },
+};
+#endif
+
#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
static struct platform_device rtc_device = {
.name = "rtc-bfin",
@@ -314,6 +342,16 @@ static struct resource musb_resources[] = {
},
};
+static struct musb_hdrc_config musb_config = {
+ .multipoint = 0,
+ .dyn_fifo = 0,
+ .soft_con = 1,
+ .dma = 1,
+ .num_eps = 7,
+ .dma_channels = 7,
+ .gpio_vrsel = GPIO_PE7,
+};
+
static struct musb_hdrc_platform_data musb_plat = {
#if defined(CONFIG_USB_MUSB_OTG)
.mode = MUSB_OTG,
@@ -322,7 +360,7 @@ static struct musb_hdrc_platform_data musb_plat = {
#elif defined(CONFIG_USB_GADGET_MUSB_HDRC)
.mode = MUSB_PERIPHERAL,
#endif
- .multipoint = 0,
+ .config = &musb_config,
};
static u64 musb_dmamask = ~(u32)0;
@@ -367,7 +405,7 @@ static struct mtd_partition partition_info[] = {
{
.name = "linux kernel(nand)",
.offset = 0,
- .size = 4 * SIZE_1M,
+ .size = 4 * 1024 * 1024,
},
{
.name = "file system(nand)",
@@ -424,7 +462,7 @@ static struct mtd_partition ezkit_partitions[] = {
.offset = 0,
}, {
.name = "linux kernel(nor)",
- .size = 0x1C0000,
+ .size = 0x400000,
.offset = MTDPART_OFS_APPEND,
}, {
.name = "file system(nor)",
@@ -441,7 +479,7 @@ static struct physmap_flash_data ezkit_flash_data = {
static struct resource ezkit_flash_resource = {
.start = 0x20000000,
- .end = 0x20ffffff,
+ .end = 0x21ffffff,
.flags = IORESOURCE_MEM,
};
@@ -551,7 +589,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
{
.modalias = "ad7877",
.platform_data = &bfin_ad7877_ts_info,
- .irq = IRQ_PJ11,
+ .irq = IRQ_PJ11, /* newer boards (Rev 1.4+) use IRQ_PB4 */
.max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */
.bus_num = 0,
.chip_select = 2,
@@ -810,6 +848,10 @@ static struct platform_device *ezkit_devices[] __initdata = {
&bf54x_kpad_device,
#endif
+#if defined(CONFIG_JOYSTICK_BFIN_ROTARY) || defined(CONFIG_JOYSTICK_BFIN_ROTARY_MODULE)
+ &bfin_rotary_device,
+#endif
+
#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
&i2c_bfin_twi0_device,
#if !defined(CONFIG_BF542)
diff --git a/arch/blackfin/mach-bf548/head.S b/arch/blackfin/mach-bf548/head.S
index 4d5cfeacb123..051b05c88027 100644
--- a/arch/blackfin/mach-bf548/head.S
+++ b/arch/blackfin/mach-bf548/head.S
@@ -73,25 +73,19 @@ ENTRY(_start_dma_code)
w[p0] = r0.l;
ssync;
-#if defined(CONFIG_BF54x)
+ /* enable self refresh via SRREQ */
P2.H = hi(EBIU_RSTCTL);
P2.L = lo(EBIU_RSTCTL);
R0 = [P2];
BITSET (R0, 3);
-#else
- P2.H = hi(EBIU_SDGCTL);
- P2.L = lo(EBIU_SDGCTL);
- R0 = [P2];
- BITSET (R0, 24);
-#endif
[P2] = R0;
SSYNC;
-#if defined(CONFIG_BF54x)
+
+ /* wait for SRACK bit to be set */
.LSRR_MODE:
R0 = [P2];
CC = BITTST(R0, 4);
if !CC JUMP .LSRR_MODE;
-#endif
r0 = CONFIG_VCO_MULT & 63; /* Load the VCO multiplier */
r0 = r0 << 9; /* Shift it over, */
@@ -100,6 +94,9 @@ ENTRY(_start_dma_code)
r1 = PLL_BYPASS; /* Bypass the PLL? */
r1 = r1 << 8; /* Shift it over */
r0 = r1 | r0; /* add them all together */
+#ifdef ANOMALY_05000265
+ r0 = BITSET(r0, 15); /* Add 250 mV of hysteresis to SPORT input pins */
+#endif
p0.h = hi(PLL_CTL);
p0.l = lo(PLL_CTL); /* Load the address */
@@ -123,7 +120,7 @@ ENTRY(_start_dma_code)
w[p0] = r0.l;
ssync;
-#if defined(CONFIG_BF54x)
+ /* disable self refresh by clearing SRREQ */
P2.H = hi(EBIU_RSTCTL);
P2.L = lo(EBIU_RSTCTL);
R0 = [P2];
@@ -155,41 +152,6 @@ ENTRY(_start_dma_code)
r0.h = hi(mem_DDRCTL2);
[p0] = r0;
ssync;
-#else
- p0.l = lo(EBIU_SDRRC);
- p0.h = hi(EBIU_SDRRC);
- r0 = mem_SDRRC;
- w[p0] = r0.l;
- ssync;
-
- p0.l = LO(EBIU_SDBCTL);
- p0.h = HI(EBIU_SDBCTL); /* SDRAM Memory Bank Control Register */
- r0 = mem_SDBCTL;
- w[p0] = r0.l;
- ssync;
-
- P2.H = hi(EBIU_SDGCTL);
- P2.L = lo(EBIU_SDGCTL);
- R0 = [P2];
- BITCLR (R0, 24);
- p0.h = hi(EBIU_SDSTAT);
- p0.l = lo(EBIU_SDSTAT);
- r2.l = w[p0];
- cc = bittst(r2,3);
- if !cc jump .Lskip;
- NOP;
- BITSET (R0, 23);
-.Lskip:
- [P2] = R0;
- SSYNC;
-
- R0.L = lo(mem_SDGCTL);
- R0.H = hi(mem_SDGCTL);
- R1 = [p2];
- R1 = R1 | R0;
- [P2] = R1;
- SSYNC;
-#endif
RTS;
ENDPROC(_start_dma_code)
diff --git a/arch/blackfin/mach-bf548/include/mach/anomaly.h b/arch/blackfin/mach-bf548/include/mach/anomaly.h
index 3ad59655881a..816b09278f62 100644
--- a/arch/blackfin/mach-bf548/include/mach/anomaly.h
+++ b/arch/blackfin/mach-bf548/include/mach/anomaly.h
@@ -2,18 +2,18 @@
* File: include/asm-blackfin/mach-bf548/anomaly.h
* Bugs: Enter bugs at http://blackfin.uclinux.org/
*
- * Copyright (C) 2004-2007 Analog Devices Inc.
+ * Copyright (C) 2004-2008 Analog Devices Inc.
* Licensed under the GPL-2 or later.
*/
/* This file shoule be up to date with:
- * - Revision E, 11/28/2007; ADSP-BF542/BF544/BF547/BF548/BF549 Blackfin Processor Anomaly List
+ * - Revision G, 08/07/2008; ADSP-BF542/BF544/BF547/BF548/BF549 Blackfin Processor Anomaly List
*/
#ifndef _MACH_ANOMALY_H_
#define _MACH_ANOMALY_H_
-/* Multi-Issue Instruction with dsp32shiftimm in slot1 and P-reg Store in slot 2 Not Supported */
+/* Multi-Issue Instruction with dsp32shiftimm in slot1 and P-reg Store in slot2 Not Supported */
#define ANOMALY_05000074 (1)
/* DMA_RUN Bit Is Not Valid after a Peripheral Receive Channel DMA Stops */
#define ANOMALY_05000119 (1)
@@ -36,14 +36,14 @@
/* TWI Slave Boot Mode Is Not Functional */
#define ANOMALY_05000324 (__SILICON_REVISION__ < 1)
/* External FIFO Boot Mode Is Not Functional */
-#define ANOMALY_05000325 (__SILICON_REVISION__ < 1)
+#define ANOMALY_05000325 (__SILICON_REVISION__ < 2)
/* Data Lost When Core and DMA Accesses Are Made to the USB FIFO Simultaneously */
#define ANOMALY_05000327 (__SILICON_REVISION__ < 1)
/* Incorrect Access of OTP_STATUS During otp_write() Function */
#define ANOMALY_05000328 (__SILICON_REVISION__ < 1)
/* Synchronous Burst Flash Boot Mode Is Not Functional */
#define ANOMALY_05000329 (__SILICON_REVISION__ < 1)
-/* Host DMA Boot Mode Is Not Functional */
+/* Host DMA Boot Modes Are Not Functional */
#define ANOMALY_05000330 (__SILICON_REVISION__ < 1)
/* Inadequate Timing Margins on DDR DQS to DQ and DQM Skew */
#define ANOMALY_05000334 (__SILICON_REVISION__ < 1)
@@ -61,26 +61,102 @@
#define ANOMALY_05000344 (__SILICON_REVISION__ < 1)
/* USB Calibration Value Is Not Intialized */
#define ANOMALY_05000346 (__SILICON_REVISION__ < 1)
-/* Boot ROM Kernel Incorrectly Alters Reset Value of USB Register */
+/* USB Calibration Value to use */
+#define ANOMALY_05000346_value 0x5411
+/* Preboot Routine Incorrectly Alters Reset Value of USB Register */
#define ANOMALY_05000347 (__SILICON_REVISION__ < 1)
/* Data Lost when Core Reads SDH Data FIFO */
#define ANOMALY_05000349 (__SILICON_REVISION__ < 1)
/* PLL Status Register Is Inaccurate */
#define ANOMALY_05000351 (__SILICON_REVISION__ < 1)
+/* bfrom_SysControl() Firmware Function Performs Improper System Reset */
+#define ANOMALY_05000353 (__SILICON_REVISION__ < 2)
+/* Regulator Programming Blocked when Hibernate Wakeup Source Remains Active */
+#define ANOMALY_05000355 (__SILICON_REVISION__ < 1)
+/* System Stalled During A Core Access To AMC While A Core Access To NFC FIFO Is Required */
+#define ANOMALY_05000356 (__SILICON_REVISION__ < 1)
/* Serial Port (SPORT) Multichannel Transmit Failure when Channel 0 Is Disabled */
#define ANOMALY_05000357 (1)
/* External Memory Read Access Hangs Core With PLL Bypass */
#define ANOMALY_05000360 (1)
/* DMAs that Go Urgent during Tight Core Writes to External Memory Are Blocked */
#define ANOMALY_05000365 (1)
+/* WURESET Bit In SYSCR Register Does Not Properly Indicate Hibernate Wake-Up */
+#define ANOMALY_05000367 (__SILICON_REVISION__ < 1)
/* Addressing Conflict between Boot ROM and Asynchronous Memory */
#define ANOMALY_05000369 (1)
+/* Default PLL MSEL and SSEL Settings Can Cause 400MHz Product To Violate Specifications */
+#define ANOMALY_05000370 (__SILICON_REVISION__ < 1)
/* Possible RETS Register Corruption when Subroutine Is under 5 Cycles in Duration */
-#define ANOMALY_05000371 (1)
+#define ANOMALY_05000371 (__SILICON_REVISION__ < 2)
+/* USB DP/DM Data Pins May Lose State When Entering Hibernate */
+#define ANOMALY_05000372 (__SILICON_REVISION__ < 1)
/* Mobile DDR Operation Not Functional */
#define ANOMALY_05000377 (1)
/* Security/Authentication Speedpath Causes Authentication To Fail To Initiate */
-#define ANOMALY_05000378 (1)
+#define ANOMALY_05000378 (__SILICON_REVISION__ < 2)
+/* 16-Bit NAND FLASH Boot Mode Is Not Functional */
+#define ANOMALY_05000379 (1)
+/* 8-Bit NAND Flash Boot Mode Not Functional */
+#define ANOMALY_05000382 (__SILICON_REVISION__ < 1)
+/* Some ATAPI Modes Are Not Functional */
+#define ANOMALY_05000383 (1)
+/* Boot from OTP Memory Not Functional */
+#define ANOMALY_05000385 (__SILICON_REVISION__ < 1)
+/* bfrom_SysControl() Firmware Routine Not Functional */
+#define ANOMALY_05000386 (__SILICON_REVISION__ < 1)
+/* Programmable Preboot Settings Not Functional */
+#define ANOMALY_05000387 (__SILICON_REVISION__ < 1)
+/* CRC32 Checksum Support Not Functional */
+#define ANOMALY_05000388 (__SILICON_REVISION__ < 1)
+/* Reset Vector Must Not Be in SDRAM Memory Space */
+#define ANOMALY_05000389 (__SILICON_REVISION__ < 1)
+/* Changed Meaning of BCODE Field in SYSCR Register */
+#define ANOMALY_05000390 (__SILICON_REVISION__ < 1)
+/* Repeated Boot from Page-Mode or Burst-Mode Flash Memory May Fail */
+#define ANOMALY_05000391 (__SILICON_REVISION__ < 1)
+/* pTempCurrent Not Present in ADI_BOOT_DATA Structure */
+#define ANOMALY_05000392 (__SILICON_REVISION__ < 1)
+/* Deprecated Value of dTempByteCount in ADI_BOOT_DATA Structure */
+#define ANOMALY_05000393 (__SILICON_REVISION__ < 1)
+/* Log Buffer Not Functional */
+#define ANOMALY_05000394 (__SILICON_REVISION__ < 1)
+/* Hook Routine Not Functional */
+#define ANOMALY_05000395 (__SILICON_REVISION__ < 1)
+/* Header Indirect Bit Not Functional */
+#define ANOMALY_05000396 (__SILICON_REVISION__ < 1)
+/* BK_ONES, BK_ZEROS, and BK_DATECODE Constants Not Functional */
+#define ANOMALY_05000397 (__SILICON_REVISION__ < 1)
+/* Lockbox SESR Disallows Certain User Interrupts */
+#define ANOMALY_05000404 (__SILICON_REVISION__ < 2)
+/* Lockbox SESR Firmware Does Not Save/Restore Full Context */
+#define ANOMALY_05000405 (1)
+/* Lockbox SESR Argument Checking Does Not Check L2 Memory Protection Range */
+#define ANOMALY_05000406 (__SILICON_REVISION__ < 2)
+/* Lockbox SESR Firmware Arguments Are Not Retained After First Initialization */
+#define ANOMALY_05000407 (__SILICON_REVISION__ < 2)
+/* Lockbox Firmware Memory Cleanup Routine Does not Clear Registers */
+#define ANOMALY_05000408 (1)
+/* Lockbox firmware leaves MDMA0 channel enabled */
+#define ANOMALY_05000409 (__SILICON_REVISION__ < 2)
+/* bfrom_SysControl() Firmware Function Cannot be Used to Enter Power Saving Modes */
+#define ANOMALY_05000411 (__SILICON_REVISION__ < 2)
+/* NAND Boot Mode Not Compatible With Some NAND Flash Devices */
+#define ANOMALY_05000413 (__SILICON_REVISION__ < 2)
+/* OTP_CHECK_FOR_PREV_WRITE Bit is Not Functional in bfrom_OtpWrite() API */
+#define ANOMALY_05000414 (__SILICON_REVISION__ < 2)
+/* Speculative Fetches Can Cause Undesired External FIFO Operations */
+#define ANOMALY_05000416 (1)
+/* Multichannel SPORT Channel Misalignment Under Specific Configuration */
+#define ANOMALY_05000425 (1)
+/* Speculative Fetches of Indirect-Pointer Instructions Can Cause Spurious Hardware Errors */
+#define ANOMALY_05000426 (1)
+/* CORE_EPPI_PRIO bit and SYS_EPPI_PRIO bit in the HMDMA1_CONTROL register are not functional */
+#define ANOMALY_05000427 (__SILICON_REVISION__ < 2)
+/* WB_EDGE Bit in NFC_IRQSTAT Incorrectly Behaves as a Buffer Status Bit Instead of an IRQ Status Bit */
+#define ANOMALY_05000429 (__SILICON_REVISION__ < 2)
+/* Software System Reset Corrupts PLL_LOCKCNT Register */
+#define ANOMALY_05000430 (__SILICON_REVISION__ >= 2)
/* Anomalies that don't exist on this proc */
#define ANOMALY_05000125 (0)
@@ -93,6 +169,7 @@
#define ANOMALY_05000263 (0)
#define ANOMALY_05000266 (0)
#define ANOMALY_05000273 (0)
+#define ANOMALY_05000307 (0)
#define ANOMALY_05000311 (0)
#define ANOMALY_05000323 (0)
#define ANOMALY_05000363 (0)
diff --git a/arch/blackfin/mach-bf548/include/mach/bf548.h b/arch/blackfin/mach-bf548/include/mach/bf548.h
index e748588e8930..49f9b403d458 100644
--- a/arch/blackfin/mach-bf548/include/mach/bf548.h
+++ b/arch/blackfin/mach-bf548/include/mach/bf548.h
@@ -30,8 +30,6 @@
#ifndef __MACH_BF548_H__
#define __MACH_BF548_H__
-#define SUPPORTED_REVID 0
-
#define OFFSET_(x) ((x) & 0x0000FFFF)
/*some misc defines*/
@@ -108,20 +106,23 @@
#if defined(CONFIG_BF542)
# define CPU "BF542"
-# define CPUID 0x027c8000
+# define CPUID 0x27de
#elif defined(CONFIG_BF544)
-# define CPU "BF544"
-# define CPUID 0x027c8000
+# define CPU "BF544"
+# define CPUID 0x27de
#elif defined(CONFIG_BF547)
-# define CPU "BF547"
+# define CPU "BF547"
+# define CPUID 0x27de
#elif defined(CONFIG_BF548)
-# define CPU "BF548"
-# define CPUID 0x027c6000
+# define CPU "BF548"
+# define CPUID 0x27de
#elif defined(CONFIG_BF549)
-# define CPU "BF549"
-#else
-# define CPU "UNKNOWN"
-# define CPUID 0x0
+# define CPU "BF549"
+# define CPUID 0x27de
+#endif
+
+#ifndef CPU
+#error Unknown CPU type - This kernel doesn't seem to be configured properly
#endif
#endif /* __MACH_BF48_H__ */
diff --git a/arch/blackfin/mach-bf548/include/mach/mem_map.h b/arch/blackfin/mach-bf548/include/mach/mem_map.h
index f99f47bc3a07..a2228428dc06 100644
--- a/arch/blackfin/mach-bf548/include/mach/mem_map.h
+++ b/arch/blackfin/mach-bf548/include/mach/mem_map.h
@@ -94,13 +94,13 @@
#endif /*CONFIG_BFIN_DCACHE*/
/* Level 2 Memory */
-#if !defined(CONFIG_BF542)
-# define L2_START 0xFEB00000
-# if defined(CONFIG_BF544)
-# define L2_LENGTH 0x10000
-# else
-# define L2_LENGTH 0x20000
-# endif
+#define L2_START 0xFEB00000
+#if defined(CONFIG_BF542)
+# define L2_LENGTH 0
+#elif defined(CONFIG_BF544)
+# define L2_LENGTH 0x10000
+#else
+# define L2_LENGTH 0x20000
#endif
/* Scratch Pad Memory */
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-21 09:56:49 +0000