diff options
Diffstat (limited to 'Documentation/devicetree')
14 files changed, 392 insertions, 8 deletions
diff --git a/Documentation/devicetree/bindings/i2c/i2c-cbus-gpio.txt b/Documentation/devicetree/bindings/i2c/i2c-cbus-gpio.txt index 8ce9cd2855b5..c143948b2a37 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-cbus-gpio.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-cbus-gpio.txt @@ -20,8 +20,8 @@ i2c@0 { #address-cells = <1>; #size-cells = <0>; - retu-mfd: retu@1 { - compatible = "retu-mfd"; + retu: retu@1 { + compatible = "nokia,retu"; reg = <0x1>; }; }; diff --git a/Documentation/devicetree/bindings/iio/counter/stm32-lptimer-cnt.txt b/Documentation/devicetree/bindings/iio/counter/stm32-lptimer-cnt.txt new file mode 100644 index 000000000000..a04aa5c04103 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/counter/stm32-lptimer-cnt.txt @@ -0,0 +1,27 @@ +STMicroelectronics STM32 Low-Power Timer quadrature encoder and counter + +STM32 Low-Power Timer provides several counter modes. It can be used as: +- quadrature encoder to detect angular position and direction of rotary + elements, from IN1 and IN2 input signals. +- simple counter from IN1 input signal. + +Must be a sub-node of an STM32 Low-Power Timer device tree node. +See ../mfd/stm32-lptimer.txt for details about the parent node. + +Required properties: +- compatible: Must be "st,stm32-lptimer-counter". +- pinctrl-names: Set to "default". +- pinctrl-0: List of phandles pointing to pin configuration nodes, + to set IN1/IN2 pins in mode of operation for Low-Power + Timer input on external pin. + +Example: + timer@40002400 { + compatible = "st,stm32-lptimer"; + ... + counter { + compatible = "st,stm32-lptimer-counter"; + pinctrl-names = "default"; + pinctrl-0 = <&lptim1_in_pins>; + }; + }; diff --git a/Documentation/devicetree/bindings/iio/timer/stm32-lptimer-trigger.txt b/Documentation/devicetree/bindings/iio/timer/stm32-lptimer-trigger.txt new file mode 100644 index 000000000000..85e6806b17d7 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/timer/stm32-lptimer-trigger.txt @@ -0,0 +1,23 @@ +STMicroelectronics STM32 Low-Power Timer Trigger + +STM32 Low-Power Timer provides trigger source (LPTIM output) that can be used +by STM32 internal ADC and/or DAC. + +Must be a sub-node of an STM32 Low-Power Timer device tree node. +See ../mfd/stm32-lptimer.txt for details about the parent node. + +Required properties: +- compatible: Must be "st,stm32-lptimer-trigger". +- reg: Identify trigger hardware block. Must be 0, 1 or 2 + respectively for lptimer1, lptimer2 or lptimer3 + trigger output. + +Example: + timer@40002400 { + compatible = "st,stm32-lptimer"; + ... + trigger@0 { + compatible = "st,stm32-lptimer-trigger"; + reg = <0>; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/atmel-smc.txt b/Documentation/devicetree/bindings/mfd/atmel-smc.txt index 26eeed373934..1103ce2030fb 100644 --- a/Documentation/devicetree/bindings/mfd/atmel-smc.txt +++ b/Documentation/devicetree/bindings/mfd/atmel-smc.txt @@ -8,6 +8,7 @@ Required properties: - compatible: Should be one of the following "atmel,at91sam9260-smc", "syscon" "atmel,sama5d3-smc", "syscon" + "atmel,sama5d2-smc", "syscon" - reg: Contains offset/length value of the SMC memory region. diff --git a/Documentation/devicetree/bindings/mfd/axp20x.txt b/Documentation/devicetree/bindings/mfd/axp20x.txt index aca09af66514..9455503b0299 100644 --- a/Documentation/devicetree/bindings/mfd/axp20x.txt +++ b/Documentation/devicetree/bindings/mfd/axp20x.txt @@ -7,7 +7,14 @@ axp209 (X-Powers) axp221 (X-Powers) axp223 (X-Powers) axp803 (X-Powers) +axp806 (X-Powers) axp809 (X-Powers) +axp813 (X-Powers) + +The AXP813 is 2 chips packaged into 1. The 2 chips do not share anything +other than the packaging. Pins are routed separately. As such they should +be treated as separate entities. The other half is an AC100 RTC/codec +combo chip. Please see ./ac100.txt for its bindings. Required properties: - compatible: should be one of: @@ -19,6 +26,7 @@ Required properties: * "x-powers,axp803" * "x-powers,axp806" * "x-powers,axp809" + * "x-powers,axp813" - reg: The I2C slave address or RSB hardware address for the AXP chip - interrupt-parent: The parent interrupt controller - interrupts: SoC NMI / GPIO interrupt connected to the PMIC's IRQ pin @@ -28,12 +36,14 @@ Required properties: Optional properties: - x-powers,dcdc-freq: defines the work frequency of DC-DC in KHz AXP152/20X: range: 750-1875, Default: 1.5 MHz - AXP22X/80X: range: 1800-4050, Default: 3 MHz + AXP22X/8XX: range: 1800-4050, Default: 3 MHz -- x-powers,drive-vbus-en: axp221 / axp223 only boolean, set this when the - N_VBUSEN pin is used as an output pin to control an external - regulator to drive the OTG VBus, rather then as an input pin - which signals whether the board is driving OTG VBus or not. +- x-powers,drive-vbus-en: boolean, set this when the N_VBUSEN pin is + used as an output pin to control an external + regulator to drive the OTG VBus, rather then + as an input pin which signals whether the + board is driving OTG VBus or not. + (axp221 / axp223 / axp813 only) - x-powers,master-mode: Boolean (axp806 only). Set this when the PMIC is wired for master mode. The default is slave mode. @@ -171,6 +181,36 @@ LDO_IO1 : LDO : ips-supply : GPIO 1 RTC_LDO : LDO : ips-supply : always on SW : On/Off Switch : swin-supply +AXP813 regulators, type, and corresponding input supply names: + +Regulator Type Supply Name Notes +--------- ---- ----------- ----- +DCDC1 : DC-DC buck : vin1-supply +DCDC2 : DC-DC buck : vin2-supply : poly-phase capable +DCDC3 : DC-DC buck : vin3-supply : poly-phase capable +DCDC4 : DC-DC buck : vin4-supply +DCDC5 : DC-DC buck : vin5-supply : poly-phase capable +DCDC6 : DC-DC buck : vin6-supply : poly-phase capable +DCDC7 : DC-DC buck : vin7-supply +ALDO1 : LDO : aldoin-supply : shared supply +ALDO2 : LDO : aldoin-supply : shared supply +ALDO3 : LDO : aldoin-supply : shared supply +DLDO1 : LDO : dldoin-supply : shared supply +DLDO2 : LDO : dldoin-supply : shared supply +DLDO3 : LDO : dldoin-supply : shared supply +DLDO4 : LDO : dldoin-supply : shared supply +ELDO1 : LDO : eldoin-supply : shared supply +ELDO2 : LDO : eldoin-supply : shared supply +ELDO3 : LDO : eldoin-supply : shared supply +FLDO1 : LDO : fldoin-supply : shared supply +FLDO2 : LDO : fldoin-supply : shared supply +FLDO3 : LDO : fldoin-supply : shared supply +LDO_IO0 : LDO : ips-supply : GPIO 0 +LDO_IO1 : LDO : ips-supply : GPIO 1 +RTC_LDO : LDO : ips-supply : always on +SW : On/Off Switch : swin-supply +DRIVEVBUS : Enable output : drivevbus-supply : external regulator + Example: axp209: pmic@34 { diff --git a/Documentation/devicetree/bindings/mfd/bd9571mwv.txt b/Documentation/devicetree/bindings/mfd/bd9571mwv.txt new file mode 100644 index 000000000000..9ab216a851d5 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/bd9571mwv.txt @@ -0,0 +1,49 @@ +* ROHM BD9571MWV Power Management Integrated Circuit (PMIC) bindings + +Required properties: + - compatible : Should be "rohm,bd9571mwv". + - reg : I2C slave address. + - interrupt-parent : Phandle to the parent interrupt controller. + - interrupts : The interrupt line the device is connected to. + - interrupt-controller : Marks the device node as an interrupt controller. + - #interrupt-cells : The number of cells to describe an IRQ, should be 2. + The first cell is the IRQ number. + The second cell is the flags, encoded as trigger + masks from ../interrupt-controller/interrupts.txt. + - gpio-controller : Marks the device node as a GPIO Controller. + - #gpio-cells : Should be two. The first cell is the pin number and + the second cell is used to specify flags. + See ../gpio/gpio.txt for more information. + - regulators: : List of child nodes that specify the regulator + initialization data. Child nodes must be named + after their hardware counterparts: + - vd09 + - vd18 + - vd25 + - vd33 + - dvfs + Each child node is defined using the standard + binding for regulators. + +Example: + + pmic: pmic@30 { + compatible = "rohm,bd9571mwv"; + reg = <0x30>; + interrupt-parent = <&gpio2>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; + + regulators { + dvfs: dvfs { + regulator-name = "dvfs"; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1030000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/da9052-i2c.txt b/Documentation/devicetree/bindings/mfd/da9052-i2c.txt index 9554292dc6cb..57fa74e65664 100644 --- a/Documentation/devicetree/bindings/mfd/da9052-i2c.txt +++ b/Documentation/devicetree/bindings/mfd/da9052-i2c.txt @@ -4,6 +4,14 @@ Required properties: - compatible : Should be "dlg,da9052", "dlg,da9053-aa", "dlg,da9053-ab", or "dlg,da9053-bb" +Optional properties: +- dlg,tsi-as-adc : Boolean, if set the X+, X-, Y+, Y- touchscreen + input lines are used as general purpose analogue + input. +- tsiref-supply: Phandle to the regulator, which provides the reference + voltage for the TSIREF pin. Must be provided when the + touchscreen pins are used for ADC purposes. + Sub-nodes: - regulators : Contain the regulator nodes. The DA9052/53 regulators are bound using their names as listed below: diff --git a/Documentation/devicetree/bindings/mfd/retu.txt b/Documentation/devicetree/bindings/mfd/retu.txt new file mode 100644 index 000000000000..876242394a16 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/retu.txt @@ -0,0 +1,25 @@ +* Device tree bindings for Nokia Retu and Tahvo multi-function device + +Retu and Tahvo are a multi-function devices found on Nokia Internet +Tablets (770, N800 and N810). The Retu chip provides watchdog timer +and power button control functionalities while Tahvo chip provides +USB transceiver functionality. + +Required properties: +- compatible: "nokia,retu" or "nokia,tahvo" +- reg: Specifies the CBUS slave address of the ASIC chip +- interrupts: The interrupt line the device is connected to +- interrupt-parent: The parent interrupt controller + +Example: + +cbus0 { + compatible = "i2c-cbus-gpio"; + ... + retu: retu@1 { + compatible = "nokia,retu"; + interrupt-parent = <&gpio4>; + interrupts = <12 IRQ_TYPE_EDGE_RISING>; + reg = <0x1>; + }; +}; diff --git a/Documentation/devicetree/bindings/mfd/rk808.txt b/Documentation/devicetree/bindings/mfd/rk808.txt index 9636ae8d8d41..91b65227afeb 100644 --- a/Documentation/devicetree/bindings/mfd/rk808.txt +++ b/Documentation/devicetree/bindings/mfd/rk808.txt @@ -1,11 +1,14 @@ RK8XX Power Management Integrated Circuit The rk8xx family current members: +rk805 rk808 rk818 Required properties: -- compatible: "rockchip,rk808", "rockchip,rk818" +- compatible: "rockchip,rk805" +- compatible: "rockchip,rk808" +- compatible: "rockchip,rk818" - reg: I2C slave address - interrupt-parent: The parent interrupt controller. - interrupts: the interrupt outputs of the controller. @@ -18,6 +21,14 @@ Optional properties: - rockchip,system-power-controller: Telling whether or not this pmic is controlling the system power. +Optional RK805 properties: +- vcc1-supply: The input supply for DCDC_REG1 +- vcc2-supply: The input supply for DCDC_REG2 +- vcc3-supply: The input supply for DCDC_REG3 +- vcc4-supply: The input supply for DCDC_REG4 +- vcc5-supply: The input supply for LDO_REG1 and LDO_REG2 +- vcc6-supply: The input supply for LDO_REG3 + Optional RK808 properties: - vcc1-supply: The input supply for DCDC_REG1 - vcc2-supply: The input supply for DCDC_REG2 @@ -56,6 +67,15 @@ by a child node of the 'regulators' node. /* standard regulator bindings here */ }; +Following regulators of the RK805 PMIC regulators are supported. Note that +the 'n' in regulator name, as in DCDC_REGn or LDOn, represents the DCDC or LDO +number as described in RK805 datasheet. + + - DCDC_REGn + - valid values for n are 1 to 4. + - LDO_REGn + - valid values for n are 1 to 3 + Following regulators of the RK808 PMIC block are supported. Note that the 'n' in regulator name, as in DCDC_REGn or LDOn, represents the DCDC or LDO number as described in RK808 datasheet. diff --git a/Documentation/devicetree/bindings/mfd/stm32-lptimer.txt b/Documentation/devicetree/bindings/mfd/stm32-lptimer.txt new file mode 100644 index 000000000000..2a9ff29db9c9 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/stm32-lptimer.txt @@ -0,0 +1,48 @@ +STMicroelectronics STM32 Low-Power Timer + +The STM32 Low-Power Timer (LPTIM) is a 16-bit timer that provides several +functions: +- PWM output (with programmable prescaler, configurable polarity) +- Quadrature encoder, counter +- Trigger source for STM32 ADC/DAC (LPTIM_OUT) + +Required properties: +- compatible: Must be "st,stm32-lptimer". +- reg: Offset and length of the device's register set. +- clocks: Phandle to the clock used by the LP Timer module. +- clock-names: Must be "mux". +- #address-cells: Should be '<1>'. +- #size-cells: Should be '<0>'. + +Optional subnodes: +- pwm: See ../pwm/pwm-stm32-lp.txt +- counter: See ../iio/timer/stm32-lptimer-cnt.txt +- trigger: See ../iio/timer/stm32-lptimer-trigger.txt + +Example: + + timer@40002400 { + compatible = "st,stm32-lptimer"; + reg = <0x40002400 0x400>; + clocks = <&timer_clk>; + clock-names = "mux"; + #address-cells = <1>; + #size-cells = <0>; + + pwm { + compatible = "st,stm32-pwm-lp"; + pinctrl-names = "default"; + pinctrl-0 = <&lppwm1_pins>; + }; + + trigger@0 { + compatible = "st,stm32-lptimer-trigger"; + reg = <0>; + }; + + counter { + compatible = "st,stm32-lptimer-counter"; + pinctrl-names = "default"; + pinctrl-0 = <&lptim1_in_pins>; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/tps6105x.txt b/Documentation/devicetree/bindings/mfd/tps6105x.txt new file mode 100644 index 000000000000..93602c7a19c8 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/tps6105x.txt @@ -0,0 +1,17 @@ +* Device tree bindings for TI TPS61050/61052 Boost Converters + +The TP61050/TPS61052 is a high-power "white LED driver". The +device provides LED, GPIO and regulator functionalities. + +Required properties: +- compatible: "ti,tps61050" or "ti,tps61052" +- reg: Specifies the I2C slave address + +Example: + +i2c0 { + tps61052@33 { + compatible = "ti,tps61052"; + reg = <0x33>; + }; +}; diff --git a/Documentation/devicetree/bindings/mfd/zii,rave-sp.txt b/Documentation/devicetree/bindings/mfd/zii,rave-sp.txt new file mode 100644 index 000000000000..088eff9ddb78 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/zii,rave-sp.txt @@ -0,0 +1,39 @@ +Zodiac Inflight Innovations RAVE Supervisory Processor + +RAVE Supervisory Processor communicates with SoC over UART. It is +expected that its Device Tree node is specified as a child of a node +corresponding to UART controller used for communication. + +Required parent device properties: + + - compatible: Should be one of: + - "zii,rave-sp-niu" + - "zii,rave-sp-mezz" + - "zii,rave-sp-esb" + - "zii,rave-sp-rdu1" + - "zii,rave-sp-rdu2" + + - current-speed: Should be set to baud rate SP device is using + +RAVE SP consists of the following sub-devices: + +Device Description +------ ----------- +rave-sp-wdt : Watchdog +rave-sp-nvmem : Interface to onborad EEPROM +rave-sp-backlight : Display backlight +rave-sp-hwmon : Interface to onboard hardware sensors +rave-sp-leds : Interface to onboard LEDs +rave-sp-input : Interface to onboard power button + +Example of usage: + + rdu { + compatible = "zii,rave-sp-rdu2"; + current-speed = <1000000>; + + watchdog { + compatible = "zii,rave-sp-watchdog"; + }; + }; + diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-rk805.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-rk805.txt new file mode 100644 index 000000000000..eee3dc260934 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-rk805.txt @@ -0,0 +1,63 @@ +Pincontrol driver for RK805 Power management IC. + +RK805 has 2 pins which can be configured as GPIO output only. + +Please refer file <devicetree/bindings/pinctrl/pinctrl-bindings.txt> +for details of the common pinctrl bindings used by client devices, +including the meaning of the phrase "pin configuration node". + +Optional Pinmux properties: +-------------------------- +Following properties are required if default setting of pins are required +at boot. +- pinctrl-names: A pinctrl state named per <pinctrl-binding.txt>. +- pinctrl[0...n]: Properties to contain the phandle for pinctrl states per + <pinctrl-binding.txt>. + +The pin configurations are defined as child of the pinctrl states node. Each +sub-node have following properties: + +Required properties: +------------------ +- #gpio-cells: Should be two. The first cell is the pin number and the + second is the GPIO flags. + +- gpio-controller: Marks the device node as a GPIO controller. + +- pins: List of pins. Valid values of pins properties are: gpio0, gpio1. + +First 2 properties must be added in the RK805 PMIC node, documented in +Documentation/devicetree/bindings/mfd/rk808.txt + +Optional properties: +------------------- +Following are optional properties defined as pinmux DT binding document +<pinctrl-bindings.txt>. Absence of properties will leave the configuration +on default. + function, + output-low, + output-high. + +Valid values for function properties are: gpio. + +Theres is also not customised properties for any GPIO. + +Example: +-------- +rk805: rk805@18 { + compatible = "rockchip,rk805"; + ... + gpio-controller; + #gpio-cells = <2>; + + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int_l>, <&rk805_default>; + + rk805_default: pinmux { + gpio01 { + pins = "gpio0", "gpio1"; + function = "gpio"; + output-high; + }; + }; +}; diff --git a/Documentation/devicetree/bindings/pwm/pwm-stm32-lp.txt b/Documentation/devicetree/bindings/pwm/pwm-stm32-lp.txt new file mode 100644 index 000000000000..f8338d11fd2b --- /dev/null +++ b/Documentation/devicetree/bindings/pwm/pwm-stm32-lp.txt @@ -0,0 +1,24 @@ +STMicroelectronics STM32 Low-Power Timer PWM + +STM32 Low-Power Timer provides single channel PWM. + +Must be a sub-node of an STM32 Low-Power Timer device tree node. +See ../mfd/stm32-lptimer.txt for details about the parent node. + +Required parameters: +- compatible: Must be "st,stm32-pwm-lp". + +Optional properties: +- pinctrl-names: Set to "default". +- pinctrl-0: Phandle pointing to pin configuration node for PWM. + +Example: + timer@40002400 { + compatible = "st,stm32-lptimer"; + ... + pwm { + compatible = "st,stm32-pwm-lp"; + pinctrl-names = "default"; + pinctrl-0 = <&lppwm1_pins>; + }; + }; |