diff options
Diffstat (limited to 'Documentation/devicetree')
64 files changed, 3668 insertions, 56 deletions
diff --git a/Documentation/devicetree/bindings/arm/arch_timer.txt b/Documentation/devicetree/bindings/arm/arch_timer.txt new file mode 100644 index 000000000000..52478c83d0cc --- /dev/null +++ b/Documentation/devicetree/bindings/arm/arch_timer.txt @@ -0,0 +1,27 @@ +* ARM architected timer + +ARM Cortex-A7 and Cortex-A15 have a per-core architected timer, which +provides per-cpu timers. + +The timer is attached to a GIC to deliver its per-processor interrupts. + +** Timer node properties: + +- compatible : Should at least contain "arm,armv7-timer". + +- interrupts : Interrupt list for secure, non-secure, virtual and + hypervisor timers, in that order. + +- clock-frequency : The frequency of the main counter, in Hz. Optional. + +Example: + + timer { + compatible = "arm,cortex-a15-timer", + "arm,armv7-timer"; + interrupts = <1 13 0xf08>, + <1 14 0xf08>, + <1 11 0xf08>, + <1 10 0xf08>; + clock-frequency = <100000000>; + }; diff --git a/Documentation/devicetree/bindings/arm/atmel-adc.txt b/Documentation/devicetree/bindings/arm/atmel-adc.txt new file mode 100644 index 000000000000..c63097d6afeb --- /dev/null +++ b/Documentation/devicetree/bindings/arm/atmel-adc.txt @@ -0,0 +1,65 @@ +* AT91's Analog to Digital Converter (ADC) + +Required properties: + - compatible: Should be "atmel,at91sam9260-adc" + - reg: Should contain ADC registers location and length + - interrupts: Should contain the IRQ line for the ADC + - atmel,adc-channel-base: Offset of the first channel data register + - atmel,adc-channels-used: Bitmask of the channels muxed and enable for this + device + - atmel,adc-drdy-mask: Mask of the DRDY interruption in the ADC + - atmel,adc-num-channels: Number of channels available in the ADC + - atmel,adc-startup-time: Startup Time of the ADC in microseconds as + defined in the datasheet + - atmel,adc-status-register: Offset of the Interrupt Status Register + - atmel,adc-trigger-register: Offset of the Trigger Register + - atmel,adc-vref: Reference voltage in millivolts for the conversions + +Optional properties: + - atmel,adc-use-external: Boolean to enable of external triggers + +Optional trigger Nodes: + - Required properties: + * trigger-name: Name of the trigger exposed to the user + * trigger-value: Value to put in the Trigger register + to activate this trigger + - Optional properties: + * trigger-external: Is the trigger an external trigger? + +Examples: +adc0: adc@fffb0000 { + compatible = "atmel,at91sam9260-adc"; + reg = <0xfffb0000 0x100>; + interrupts = <20 4>; + atmel,adc-channel-base = <0x30>; + atmel,adc-channels-used = <0xff>; + atmel,adc-drdy-mask = <0x10000>; + atmel,adc-num-channels = <8>; + atmel,adc-startup-time = <40>; + atmel,adc-status-register = <0x1c>; + atmel,adc-trigger-register = <0x08>; + atmel,adc-use-external; + atmel,adc-vref = <3300>; + + trigger@0 { + trigger-name = "external-rising"; + trigger-value = <0x1>; + trigger-external; + }; + trigger@1 { + trigger-name = "external-falling"; + trigger-value = <0x2>; + trigger-external; + }; + + trigger@2 { + trigger-name = "external-any"; + trigger-value = <0x3>; + trigger-external; + }; + + trigger@3 { + trigger-name = "continuous"; + trigger-value = <0x6>; + }; +}; diff --git a/Documentation/devicetree/bindings/arm/fsl.txt b/Documentation/devicetree/bindings/arm/fsl.txt index bfbc771a65f8..ac9e7516756e 100644 --- a/Documentation/devicetree/bindings/arm/fsl.txt +++ b/Documentation/devicetree/bindings/arm/fsl.txt @@ -1,6 +1,14 @@ Freescale i.MX Platforms Device Tree Bindings ----------------------------------------------- +i.MX23 Evaluation Kit +Required root node properties: + - compatible = "fsl,imx23-evk", "fsl,imx23"; + +i.MX28 Evaluation Kit +Required root node properties: + - compatible = "fsl,imx28-evk", "fsl,imx28"; + i.MX51 Babbage Board Required root node properties: - compatible = "fsl,imx51-babbage", "fsl,imx51"; @@ -29,6 +37,10 @@ i.MX6 Quad SABRE Lite Board Required root node properties: - compatible = "fsl,imx6q-sabrelite", "fsl,imx6q"; +i.MX6 Quad SABRE Smart Device Board +Required root node properties: + - compatible = "fsl,imx6q-sabresd", "fsl,imx6q"; + Generic i.MX boards ------------------- diff --git a/Documentation/devicetree/bindings/arm/gic.txt b/Documentation/devicetree/bindings/arm/gic.txt index 9b4b82a721b6..62eb8df1e08d 100644 --- a/Documentation/devicetree/bindings/arm/gic.txt +++ b/Documentation/devicetree/bindings/arm/gic.txt @@ -11,7 +11,9 @@ have PPIs or SGIs. Main node required properties: - compatible : should be one of: + "arm,cortex-a15-gic" "arm,cortex-a9-gic" + "arm,cortex-a7-gic" "arm,arm11mp-gic" - interrupt-controller : Identifies the node as an interrupt controller - #interrupt-cells : Specifies the number of cells needed to encode an @@ -39,8 +41,9 @@ Main node required properties: the GIC cpu interface register base and size. Optional -- interrupts : Interrupt source of the parent interrupt controller. Only - present on secondary GICs. +- interrupts : Interrupt source of the parent interrupt controller on + secondary GICs, or VGIC maintainance interrupt on primary GIC (see + below). - cpu-offset : per-cpu offset within the distributor and cpu interface regions, used when the GIC doesn't have banked registers. The offset is @@ -57,3 +60,31 @@ Example: <0xfff10100 0x100>; }; + +* GIC virtualization extensions (VGIC) + +For ARM cores that support the virtualization extensions, additional +properties must be described (they only exist if the GIC is the +primary interrupt controller). + +Required properties: + +- reg : Additional regions specifying the base physical address and + size of the VGIC registers. The first additional region is the GIC + virtual interface control register base and size. The 2nd additional + region is the GIC virtual cpu interface register base and size. + +- interrupts : VGIC maintainance interrupt. + +Example: + + interrupt-controller@2c001000 { + compatible = "arm,cortex-a15-gic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x2c001000 0x1000>, + <0x2c002000 0x1000>, + <0x2c004000 0x2000>, + <0x2c006000 0x2000>; + interrupts = <1 9 0xf04>; + }; diff --git a/Documentation/devicetree/bindings/arm/lpc32xx-mic.txt b/Documentation/devicetree/bindings/arm/lpc32xx-mic.txt new file mode 100644 index 000000000000..539adca19e8f --- /dev/null +++ b/Documentation/devicetree/bindings/arm/lpc32xx-mic.txt @@ -0,0 +1,38 @@ +* NXP LPC32xx Main Interrupt Controller + (MIC, including SIC1 and SIC2 secondary controllers) + +Required properties: +- compatible: Should be "nxp,lpc3220-mic" +- interrupt-controller: Identifies the node as an interrupt controller. +- interrupt-parent: Empty for the interrupt controller itself +- #interrupt-cells: The number of cells to define the interrupts. Should be 2. + The first cell is the IRQ number + The second cell is used to specify mode: + 1 = low-to-high edge triggered + 2 = high-to-low edge triggered + 4 = active high level-sensitive + 8 = active low level-sensitive + Default for internal sources should be set to 4 (active high). +- reg: Should contain MIC registers location and length + +Examples: + /* + * MIC + */ + mic: interrupt-controller@40008000 { + compatible = "nxp,lpc3220-mic"; + interrupt-controller; + interrupt-parent; + #interrupt-cells = <2>; + reg = <0x40008000 0xC000>; + }; + + /* + * ADC + */ + adc@40048000 { + compatible = "nxp,lpc3220-adc"; + reg = <0x40048000 0x1000>; + interrupt-parent = <&mic>; + interrupts = <39 4>; + }; diff --git a/Documentation/devicetree/bindings/arm/lpc32xx.txt b/Documentation/devicetree/bindings/arm/lpc32xx.txt new file mode 100644 index 000000000000..56ec8ddc4a3b --- /dev/null +++ b/Documentation/devicetree/bindings/arm/lpc32xx.txt @@ -0,0 +1,8 @@ +NXP LPC32xx Platforms Device Tree Bindings +------------------------------------------ + +Boards with the NXP LPC32xx SoC shall have the following properties: + +Required root node property: + +compatible: must be "nxp,lpc3220", "nxp,lpc3230", "nxp,lpc3240" or "nxp,lpc3250" diff --git a/Documentation/devicetree/bindings/arm/mrvl/intc.txt b/Documentation/devicetree/bindings/arm/mrvl/intc.txt new file mode 100644 index 000000000000..80b9a94d9a23 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/mrvl/intc.txt @@ -0,0 +1,40 @@ +* Marvell MMP Interrupt controller + +Required properties: +- compatible : Should be "mrvl,mmp-intc", "mrvl,mmp2-intc" or + "mrvl,mmp2-mux-intc" +- reg : Address and length of the register set of the interrupt controller. + If the interrupt controller is intc, address and length means the range + of the whold interrupt controller. If the interrupt controller is mux-intc, + address and length means one register. Since address of mux-intc is in the + range of intc. mux-intc is secondary interrupt controller. +- reg-names : Name of the register set of the interrupt controller. It's + only required in mux-intc interrupt controller. +- interrupts : Should be the port interrupt shared by mux interrupts. It's + only required in mux-intc interrupt controller. +- interrupt-controller : Identifies the node as an interrupt controller. +- #interrupt-cells : Specifies the number of cells needed to encode an + interrupt source. +- mrvl,intc-nr-irqs : Specifies the number of interrupts in the interrupt + controller. +- mrvl,clr-mfp-irq : Specifies the interrupt that needs to clear MFP edge + detection first. + +Example: + intc: interrupt-controller@d4282000 { + compatible = "mrvl,mmp2-intc"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0xd4282000 0x1000>; + mrvl,intc-nr-irqs = <64>; + }; + + intcmux4@d4282150 { + compatible = "mrvl,mmp2-mux-intc"; + interrupts = <4>; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x150 0x4>, <0x168 0x4>; + reg-names = "mux status", "mux mask"; + mrvl,intc-nr-irqs = <2>; + }; diff --git a/Documentation/devicetree/bindings/arm/mrvl.txt b/Documentation/devicetree/bindings/arm/mrvl/mrvl.txt index d8de933e9d81..117d741a2e4f 100644 --- a/Documentation/devicetree/bindings/arm/mrvl.txt +++ b/Documentation/devicetree/bindings/arm/mrvl/mrvl.txt @@ -4,3 +4,11 @@ Marvell Platforms Device Tree Bindings PXA168 Aspenite Board Required root node properties: - compatible = "mrvl,pxa168-aspenite", "mrvl,pxa168"; + +PXA910 DKB Board +Required root node properties: + - compatible = "mrvl,pxa910-dkb"; + +MMP2 Brownstone Board +Required root node properties: + - compatible = "mrvl,mmp2-brownstone"; diff --git a/Documentation/devicetree/bindings/arm/mrvl/timer.txt b/Documentation/devicetree/bindings/arm/mrvl/timer.txt new file mode 100644 index 000000000000..9a6e251462e7 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/mrvl/timer.txt @@ -0,0 +1,13 @@ +* Marvell MMP Timer controller + +Required properties: +- compatible : Should be "mrvl,mmp-timer". +- reg : Address and length of the register set of timer controller. +- interrupts : Should be the interrupt number. + +Example: + timer0: timer@d4014000 { + compatible = "mrvl,mmp-timer"; + reg = <0xd4014000 0x100>; + interrupts = <13>; + }; diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-ahb.txt b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-ahb.txt new file mode 100644 index 000000000000..234406d41c12 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-ahb.txt @@ -0,0 +1,11 @@ +NVIDIA Tegra AHB + +Required properties: +- compatible : "nvidia,tegra20-ahb" or "nvidia,tegra30-ahb" +- reg : Should contain 1 register ranges(address and length) + +Example: + ahb: ahb@6000c004 { + compatible = "nvidia,tegra20-ahb"; + reg = <0x6000c004 0x10c>; /* AHB Arbitration + Gizmo Controller */ + }; diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-mc.txt b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-mc.txt new file mode 100644 index 000000000000..c25a0a55151d --- /dev/null +++ b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-mc.txt @@ -0,0 +1,16 @@ +NVIDIA Tegra20 MC(Memory Controller) + +Required properties: +- compatible : "nvidia,tegra20-mc" +- reg : Should contain 2 register ranges(address and length); see the + example below. Note that the MC registers are interleaved with the + GART registers, and hence must be represented as multiple ranges. +- interrupts : Should contain MC General interrupt. + +Example: + mc { + compatible = "nvidia,tegra20-mc"; + reg = <0x7000f000 0x024 + 0x7000f03c 0x3c4>; + interrupts = <0 77 0x04>; + }; diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra30-mc.txt b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra30-mc.txt new file mode 100644 index 000000000000..e47e73f612f4 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra30-mc.txt @@ -0,0 +1,18 @@ +NVIDIA Tegra30 MC(Memory Controller) + +Required properties: +- compatible : "nvidia,tegra30-mc" +- reg : Should contain 4 register ranges(address and length); see the + example below. Note that the MC registers are interleaved with the + SMMU registers, and hence must be represented as multiple ranges. +- interrupts : Should contain MC General interrupt. + +Example: + mc { + compatible = "nvidia,tegra30-mc"; + reg = <0x7000f000 0x010 + 0x7000f03c 0x1b4 + 0x7000f200 0x028 + 0x7000f284 0x17c>; + interrupts = <0 77 0x04>; + }; diff --git a/Documentation/devicetree/bindings/dma/fsl-mxs-dma.txt b/Documentation/devicetree/bindings/dma/fsl-mxs-dma.txt new file mode 100644 index 000000000000..ded0398d3bdc --- /dev/null +++ b/Documentation/devicetree/bindings/dma/fsl-mxs-dma.txt @@ -0,0 +1,19 @@ +* Freescale MXS DMA + +Required properties: +- compatible : Should be "fsl,<chip>-dma-apbh" or "fsl,<chip>-dma-apbx" +- reg : Should contain registers location and length + +Supported chips: +imx23, imx28. + +Examples: +dma-apbh@80004000 { + compatible = "fsl,imx28-dma-apbh"; + reg = <0x80004000 2000>; +}; + +dma-apbx@80024000 { + compatible = "fsl,imx28-dma-apbx"; + reg = <0x80024000 2000>; +}; diff --git a/Documentation/devicetree/bindings/dma/snps-dma.txt b/Documentation/devicetree/bindings/dma/snps-dma.txt new file mode 100644 index 000000000000..c0d85dbcada5 --- /dev/null +++ b/Documentation/devicetree/bindings/dma/snps-dma.txt @@ -0,0 +1,17 @@ +* Synopsys Designware DMA Controller + +Required properties: +- compatible: "snps,dma-spear1340" +- reg: Address range of the DMAC registers +- interrupt-parent: Should be the phandle for the interrupt controller + that services interrupts for this device +- interrupt: Should contain the DMAC interrupt number + +Example: + + dma@fc000000 { + compatible = "snps,dma-spear1340"; + reg = <0xfc000000 0x1000>; + interrupt-parent = <&vic1>; + interrupts = <12>; + }; diff --git a/Documentation/devicetree/bindings/gpio/gpio-mxs.txt b/Documentation/devicetree/bindings/gpio/gpio-mxs.txt new file mode 100644 index 000000000000..0c35673f7a3e --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/gpio-mxs.txt @@ -0,0 +1,87 @@ +* Freescale MXS GPIO controller + +The Freescale MXS GPIO controller is part of MXS PIN controller. The +GPIOs are organized in port/bank. Each port consists of 32 GPIOs. + +As the GPIO controller is embedded in the PIN controller and all the +GPIO ports share the same IO space with PIN controller, the GPIO node +will be represented as sub-nodes of MXS pinctrl node. + +Required properties for GPIO node: +- compatible : Should be "fsl,<soc>-gpio". The supported SoCs include + imx23 and imx28. +- interrupts : Should be the port interrupt shared by all 32 pins. +- gpio-controller : Marks the device node as a gpio controller. +- #gpio-cells : Should be two. The first cell is the pin number and + the second cell is used to specify optional parameters (currently + unused). +- interrupt-controller: Marks the device node as an interrupt controller. +- #interrupt-cells : Should be 2. The first cell is the GPIO number. + The second cell bits[3:0] is used to specify trigger type and level flags: + 1 = low-to-high edge triggered. + 2 = high-to-low edge triggered. + 4 = active high level-sensitive. + 8 = active low level-sensitive. + +Note: Each GPIO port should have an alias correctly numbered in "aliases" +node. + +Examples: + +aliases { + gpio0 = &gpio0; + gpio1 = &gpio1; + gpio2 = &gpio2; + gpio3 = &gpio3; + gpio4 = &gpio4; +}; + +pinctrl@80018000 { + compatible = "fsl,imx28-pinctrl", "simple-bus"; + reg = <0x80018000 2000>; + + gpio0: gpio@0 { + compatible = "fsl,imx28-gpio"; + interrupts = <127>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio1: gpio@1 { + compatible = "fsl,imx28-gpio"; + interrupts = <126>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio2: gpio@2 { + compatible = "fsl,imx28-gpio"; + interrupts = <125>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio3: gpio@3 { + compatible = "fsl,imx28-gpio"; + interrupts = <124>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio4: gpio@4 { + compatible = "fsl,imx28-gpio"; + interrupts = <123>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; +}; diff --git a/Documentation/devicetree/bindings/gpio/gpio-nmk.txt b/Documentation/devicetree/bindings/gpio/gpio-nmk.txt new file mode 100644 index 000000000000..ee87467ad8d6 --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/gpio-nmk.txt @@ -0,0 +1,31 @@ +Nomadik GPIO controller + +Required properties: +- compatible : Should be "st,nomadik-gpio". +- reg : Physical base address and length of the controller's registers. +- interrupts : The interrupt outputs from the controller. +- #gpio-cells : Should be two: + The first cell is the pin number. + The second cell is used to specify optional parameters: + - bits[3:0] trigger type and level flags: + 1 = low-to-high edge triggered. + 2 = high-to-low edge triggered. + 4 = active high level-sensitive. + 8 = active low level-sensitive. +- gpio-controller : Marks the device node as a GPIO controller. +- interrupt-controller : Marks the device node as an interrupt controller. +- gpio-bank : Specifies which bank a controller owns. +- st,supports-sleepmode : Specifies whether controller can sleep or not + +Example: + + gpio1: gpio@8012e080 { + compatible = "st,nomadik-gpio"; + reg = <0x8012e080 0x80>; + interrupts = <0 120 0x4>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + supports-sleepmode; + gpio-bank = <1>; + }; diff --git a/Documentation/devicetree/bindings/gpio/gpio_lpc32xx.txt b/Documentation/devicetree/bindings/gpio/gpio_lpc32xx.txt new file mode 100644 index 000000000000..49819367a011 --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/gpio_lpc32xx.txt @@ -0,0 +1,43 @@ +NXP LPC32xx SoC GPIO controller + +Required properties: +- compatible: must be "nxp,lpc3220-gpio" +- reg: Physical base address and length of the controller's registers. +- gpio-controller: Marks the device node as a GPIO controller. +- #gpio-cells: Should be 3: + 1) bank: + 0: GPIO P0 + 1: GPIO P1 + 2: GPIO P2 + 3: GPIO P3 + 4: GPI P3 + 5: GPO P3 + 2) pin number + 3) optional parameters: + - bit 0 specifies polarity (0 for normal, 1 for inverted) +- reg: Index of the GPIO group + +Example: + + gpio: gpio@40028000 { + compatible = "nxp,lpc3220-gpio"; + reg = <0x40028000 0x1000>; + gpio-controller; + #gpio-cells = <3>; /* bank, pin, flags */ + }; + + leds { + compatible = "gpio-leds"; + + led0 { + gpios = <&gpio 5 1 1>; /* GPO_P3 1, active low */ + linux,default-trigger = "heartbeat"; + default-state = "off"; + }; + + led1 { + gpios = <&gpio 5 14 1>; /* GPO_P3 14, active low */ + linux,default-trigger = "timer"; + default-state = "off"; + }; + }; diff --git a/Documentation/devicetree/bindings/gpio/mrvl-gpio.txt b/Documentation/devicetree/bindings/gpio/mrvl-gpio.txt index 1e34cfe5ebea..05428f39d9ac 100644 --- a/Documentation/devicetree/bindings/gpio/mrvl-gpio.txt +++ b/Documentation/devicetree/bindings/gpio/mrvl-gpio.txt @@ -3,19 +3,25 @@ Required properties: - compatible : Should be "mrvl,pxa-gpio" or "mrvl,mmp-gpio" - reg : Address and length of the register set for the device -- interrupts : Should be the port interrupt shared by all gpio pins, if -- interrupt-name : Should be the name of irq resource. - one number. +- interrupts : Should be the port interrupt shared by all gpio pins. + There're three gpio interrupts in arch-pxa, and they're gpio0, + gpio1 and gpio_mux. There're only one gpio interrupt in arch-mmp, + gpio_mux. +- interrupt-name : Should be the name of irq resource. Each interrupt + binds its interrupt-name. +- interrupt-controller : Identifies the node as an interrupt controller. +- #interrupt-cells: Specifies the number of cells needed to encode an + interrupt source. - gpio-controller : Marks the device node as a gpio controller. - #gpio-cells : Should be one. It is the pin number. Example: gpio: gpio@d4019000 { - compatible = "mrvl,mmp-gpio", "mrvl,pxa-gpio"; + compatible = "mrvl,mmp-gpio"; reg = <0xd4019000 0x1000>; - interrupts = <49>, <17>, <18>; - interrupt-name = "gpio_mux", "gpio0", "gpio1"; + interrupts = <49>; + interrupt-name = "gpio_mux"; gpio-controller; #gpio-cells = <1>; interrupt-controller; diff --git a/Documentation/devicetree/bindings/i2c/i2c-mxs.txt b/Documentation/devicetree/bindings/i2c/i2c-mxs.txt new file mode 100644 index 000000000000..1bfc02de1b0c --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/i2c-mxs.txt @@ -0,0 +1,16 @@ +* Freescale MXS Inter IC (I2C) Controller + +Required properties: +- compatible: Should be "fsl,<chip>-i2c" +- reg: Should contain registers location and length +- interrupts: Should contain ERROR and DMA interrupts + +Examples: + +i2c0: i2c@80058000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx28-i2c"; + reg = <0x80058000 2000>; + interrupts = <111 68>; +}; diff --git a/Documentation/devicetree/bindings/i2c/mrvl-i2c.txt b/Documentation/devicetree/bindings/i2c/mrvl-i2c.txt index 071eb3caae91..b891ee218354 100644 --- a/Documentation/devicetree/bindings/i2c/mrvl-i2c.txt +++ b/Documentation/devicetree/bindings/i2c/mrvl-i2c.txt @@ -3,34 +3,31 @@ Required properties : - reg : Offset and length of the register set for the device - - compatible : should be "mrvl,mmp-twsi" where CHIP is the name of a + - compatible : should be "mrvl,mmp-twsi" where mmp is the name of a compatible processor, e.g. pxa168, pxa910, mmp2, mmp3. For the pxa2xx/pxa3xx, an additional node "mrvl,pxa-i2c" is required as shown in the example below. Recommended properties : - - interrupts : <a b> where a is the interrupt number and b is a - field that represents an encoding of the sense and level - information for the interrupt. This should be encoded based on - the information in section 2) depending on the type of interrupt - controller you have. + - interrupts : the interrupt number - interrupt-parent : the phandle for the interrupt controller that - services interrupts for this device. + services interrupts for this device. If the parent is the default + interrupt controller in device tree, it could be ignored. - mrvl,i2c-polling : Disable interrupt of i2c controller. Polling status register of i2c controller instead. - mrvl,i2c-fast-mode : Enable fast mode of i2c controller. Examples: twsi1: i2c@d4011000 { - compatible = "mrvl,mmp-twsi", "mrvl,pxa-i2c"; + compatible = "mrvl,mmp-twsi"; reg = <0xd4011000 0x1000>; interrupts = <7>; mrvl,i2c-fast-mode; }; twsi2: i2c@d4025000 { - compatible = "mrvl,mmp-twsi", "mrvl,pxa-i2c"; + compatible = "mrvl,mmp-twsi"; reg = <0xd4025000 0x1000>; interrupts = <58>; }; diff --git a/Documentation/devicetree/bindings/i2c/pnx.txt b/Documentation/devicetree/bindings/i2c/pnx.txt new file mode 100644 index 000000000000..fe98ada33ee4 --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/pnx.txt @@ -0,0 +1,36 @@ +* NXP PNX I2C Controller + +Required properties: + + - reg: Offset and length of the register set for the device + - compatible: should be "nxp,pnx-i2c" + - interrupts: configure one interrupt line + - #address-cells: always 1 (for i2c addresses) + - #size-cells: always 0 + - interrupt-parent: the phandle for the interrupt controller that + services interrupts for this device. + +Optional properties: + + - clock-frequency: desired I2C bus clock frequency in Hz, Default: 100000 Hz + +Examples: + + i2c1: i2c@400a0000 { + compatible = "nxp,pnx-i2c"; + reg = <0x400a0000 0x100>; + interrupt-parent = <&mic>; + interrupts = <51 0>; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c2: i2c@400a8000 { + compatible = "nxp,pnx-i2c"; + reg = <0x400a8000 0x100>; + interrupt-parent = <&mic>; + interrupts = <50 0>; + #address-cells = <1>; + #size-cells = <0>; + clock-frequency = <100000>; + }; diff --git a/Documentation/devicetree/bindings/input/spear-keyboard.txt b/Documentation/devicetree/bindings/input/spear-keyboard.txt new file mode 100644 index 000000000000..4a846d26da23 --- /dev/null +++ b/Documentation/devicetree/bindings/input/spear-keyboard.txt @@ -0,0 +1,20 @@ +* SPEAr keyboard controller + +Required properties: +- compatible: "st,spear300-kbd" + +Optional properties, in addition to those specified by the shared +matrix-keyboard bindings: +- autorepeat: bool: enables key autorepeat +- st,mode: keyboard mode: 0 - 9x9, 1 - 6x6, 2 - 2x2 + +Example: + +kbd@fc400000 { + compatible = "st,spear300-kbd"; + reg = <0xfc400000 0x100>; + linux,keymap = < 0x00030012 + 0x0102003a >; + autorepeat; + st,mode = <0>; +}; diff --git a/Documentation/devicetree/bindings/input/touchscreen/lpc32xx-tsc.txt b/Documentation/devicetree/bindings/input/touchscreen/lpc32xx-tsc.txt new file mode 100644 index 000000000000..41cbf4b7a670 --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/lpc32xx-tsc.txt @@ -0,0 +1,16 @@ +* NXP LPC32xx SoC Touchscreen Controller (TSC) + +Required properties: +- compatible: must be "nxp,lpc3220-tsc" +- reg: physical base address of the controller and length of memory mapped + region. +- interrupts: The TSC/ADC interrupt + +Example: + + tsc@40048000 { + compatible = "nxp,lpc3220-tsc"; + reg = <0x40048000 0x1000>; + interrupt-parent = <&mic>; + interrupts = <39 0>; + }; diff --git a/Documentation/devicetree/bindings/input/twl6040-vibra.txt b/Documentation/devicetree/bindings/input/twl6040-vibra.txt new file mode 100644 index 000000000000..5b1918b818fb --- /dev/null +++ b/Documentation/devicetree/bindings/input/twl6040-vibra.txt @@ -0,0 +1,37 @@ +Vibra driver for the twl6040 family + +The vibra driver is a child of the twl6040 MFD dirver. +Documentation/devicetree/bindings/mfd/twl6040.txt + +Required properties: +- compatible : Must be "ti,twl6040-vibra"; +- interrupts: 4, Vibra overcurrent interrupt +- vddvibl-supply: Regulator supplying the left vibra motor +- vddvibr-supply: Regulator supplying the right vibra motor +- vibldrv_res: Board specific left driver resistance +- vibrdrv_res: Board specific right driver resistance +- viblmotor_res: Board specific left motor resistance +- vibrmotor_res: Board specific right motor resistance + +Optional properties: +- vddvibl_uV: If the vddvibl default voltage need to be changed +- vddvibr_uV: If the vddvibr default voltage need to be changed + +Example: +/* + * 8-channel high quality low-power audio codec + * http://www.ti.com/lit/ds/symlink/twl6040.pdf + */ +twl6040: twl6040@4b { + ... + twl6040_vibra: twl6040@1 { + compatible = "ti,twl6040-vibra"; + interrupts = <4>; + vddvibl-supply = <&vbat>; + vddvibr-supply = <&vbat>; + vibldrv_res = <8>; + vibrdrv_res = <3>; + viblmotor_res = <10>; + vibrmotor_res = <10>; + }; +}; diff --git a/Documentation/devicetree/bindings/misc/bmp085.txt b/Documentation/devicetree/bindings/misc/bmp085.txt new file mode 100644 index 000000000000..91dfda2e4e11 --- /dev/null +++ b/Documentation/devicetree/bindings/misc/bmp085.txt @@ -0,0 +1,20 @@ +BMP085/BMP18x digital pressure sensors + +Required properties: +- compatible: bosch,bmp085 + +Optional properties: +- chip-id: configurable chip id for non-default chip revisions +- temp-measurement-period: temperature measurement period (milliseconds) +- default-oversampling: default oversampling value to be used at startup, + value range is 0-3 with rising sensitivity. + +Example: + +pressure@77 { + compatible = "bosch,bmp085"; + reg = <0x77>; + chip-id = <10>; + temp-measurement-period = <100>; + default-oversampling = <2>; +}; diff --git a/Documentation/devicetree/bindings/mmc/fsl-esdhc.txt b/Documentation/devicetree/bindings/mmc/fsl-esdhc.txt index 64bcb8be973c..0d93b4b0e0e3 100644 --- a/Documentation/devicetree/bindings/mmc/fsl-esdhc.txt +++ b/Documentation/devicetree/bindings/mmc/fsl-esdhc.txt @@ -11,9 +11,11 @@ Required properties: - interrupt-parent : interrupt source phandle. - clock-frequency : specifies eSDHC base clock frequency. - sdhci,wp-inverted : (optional) specifies that eSDHC controller - reports inverted write-protect state; + reports inverted write-protect state; New devices should use + the generic "wp-inverted" property. - sdhci,1-bit-only : (optional) specifies that a controller can - only handle 1-bit data transfers. + only handle 1-bit data transfers. New devices should use the + generic "bus-width = <1>" property. - sdhci,auto-cmd12: (optional) specifies that a controller can only handle auto CMD12. diff --git a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt index ab22fe6e73ab..c7e404b3ef05 100644 --- a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt +++ b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt @@ -9,7 +9,7 @@ Required properties: - interrupts : Should contain eSDHC interrupt Optional properties: -- fsl,card-wired : Indicate the card is wired to host permanently +- non-removable : Indicate the card is wired to host permanently - fsl,cd-internal : Indicate to use controller internal card detection - fsl,wp-internal : Indicate to use controller internal write protection - cd-gpios : Specify GPIOs for card detection diff --git a/Documentation/devicetree/bindings/mmc/mmc-spi-slot.txt b/Documentation/devicetree/bindings/mmc/mmc-spi-slot.txt index 89a0084df2f7..d64aea5a4203 100644 --- a/Documentation/devicetree/bindings/mmc/mmc-spi-slot.txt +++ b/Documentation/devicetree/bindings/mmc/mmc-spi-slot.txt @@ -10,7 +10,8 @@ Required properties: Optional properties: - gpios : may specify GPIOs in this order: Card-Detect GPIO, - Write-Protect GPIO. + Write-Protect GPIO. Note that this does not follow the + binding from mmc.txt, for historic reasons. - interrupts : the interrupt of a card detect interrupt. - interrupt-parent : the phandle for the interrupt controller that services interrupts for this device. diff --git a/Documentation/devicetree/bindings/mmc/mmc.txt b/Documentation/devicetree/bindings/mmc/mmc.txt new file mode 100644 index 000000000000..6e70dcde0a71 --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/mmc.txt @@ -0,0 +1,27 @@ +These properties are common to multiple MMC host controllers. Any host +that requires the respective functionality should implement them using +these definitions. + +Required properties: +- bus-width: Number of data lines, can be <1>, <4>, or <8> + +Optional properties: +- cd-gpios : Specify GPIOs for card detection, see gpio binding +- wp-gpios : Specify GPIOs for write protection, see gpio binding +- cd-inverted: when present, polarity on the wp gpio line is inverted +- wp-inverted: when present, polarity on the wp gpio line is inverted +- non-removable: non-removable slot (like eMMC) +- max-frequency: maximum operating clock frequency + +Example: + +sdhci@ab000000 { + compatible = "sdhci"; + reg = <0xab000000 0x200>; + interrupts = <23>; + bus-width = <4>; + cd-gpios = <&gpio 69 0>; + cd-inverted; + wp-gpios = <&gpio 70 0>; + max-frequency = <50000000>; +} diff --git a/Documentation/devicetree/bindings/mmc/mmci.txt b/Documentation/devicetree/bindings/mmc/mmci.txt new file mode 100644 index 000000000000..14a81d526118 --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/mmci.txt @@ -0,0 +1,19 @@ +* ARM PrimeCell MultiMedia Card Interface (MMCI) PL180/1 + +The ARM PrimeCell MMCI PL180 and PL181 provides and interface for +reading and writing to MultiMedia and SD cards alike. + +Required properties: +- compatible : contains "arm,pl18x", "arm,primecell". +- reg : contains pl18x registers and length. +- interrupts : contains the device IRQ(s). +- arm,primecell-periphid : contains the PrimeCell Peripheral ID. + +Optional properties: +- wp-gpios : contains any write protect (ro) gpios +- cd-gpios : contains any card detection gpios +- cd-inverted : indicates whether the cd gpio is inverted +- max-frequency : contains the maximum operating frequency +- bus-width : number of data lines, can be <1>, <4>, or <8> +- mmc-cap-mmc-highspeed : indicates whether MMC is high speed capable +- mmc-cap-sd-highspeed : indicates whether SD is high speed capable diff --git a/Documentation/devicetree/bindings/mmc/mxs-mmc.txt b/Documentation/devicetree/bindings/mmc/mxs-mmc.txt new file mode 100644 index 000000000000..14d870a9e3db --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/mxs-mmc.txt @@ -0,0 +1,25 @@ +* Freescale MXS MMC controller + +The Freescale MXS Synchronous Serial Ports (SSP) can act as a MMC controller +to support MMC, SD, and SDIO types of memory cards. + +Required properties: +- compatible: Should be "fsl,<chip>-mmc". The supported chips include + imx23 and imx28. +- reg: Should contain registers location and length +- interrupts: Should contain ERROR and DMA interrupts +- fsl,ssp-dma-channel: APBH DMA channel for the SSP +- bus-width: Number of data lines, can be <1>, <4>, or <8> + +Optional properties: +- wp-gpios: Specify GPIOs for write protection + +Examples: + +ssp0: ssp@80010000 { + compatible = "fsl,imx28-mmc"; + reg = <0x80010000 2000>; + interrupts = <96 82>; + fsl,ssp-dma-channel = <0>; + bus-width = <8>; +}; diff --git a/Documentation/devicetree/bindings/mmc/nvidia-sdhci.txt b/Documentation/devicetree/bindings/mmc/nvidia-sdhci.txt index 7e51154679a6..f77c3031607f 100644 --- a/Documentation/devicetree/bindings/mmc/nvidia-sdhci.txt +++ b/Documentation/devicetree/bindings/mmc/nvidia-sdhci.txt @@ -7,12 +7,12 @@ Required properties: - compatible : Should be "nvidia,<chip>-sdhci" - reg : Should contain SD/MMC registers location and length - interrupts : Should contain SD/MMC interrupt +- bus-width : Number of data lines, can be <1>, <4>, or <8> Optional properties: - cd-gpios : Specify GPIOs for card detection - wp-gpios : Specify GPIOs for write protection - power-gpios : Specify GPIOs for power control -- support-8bit : Boolean, indicates if 8-bit mode should be used. Example: @@ -23,5 +23,5 @@ sdhci@c8000200 { cd-gpios = <&gpio 69 0>; /* gpio PI5 */ wp-gpios = <&gpio 57 0>; /* gpio PH1 */ power-gpios = <&gpio 155 0>; /* gpio PT3 */ - support-8bit; + bus-width = <8>; }; diff --git a/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt b/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt index dbd4368ab8cc..8a53958c9a9f 100644 --- a/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt +++ b/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt @@ -15,7 +15,7 @@ Optional properties: ti,dual-volt: boolean, supports dual voltage cards <supply-name>-supply: phandle to the regulator device tree node "supply-name" examples are "vmmc", "vmmc_aux" etc -ti,bus-width: Number of data lines, default assumed is 1 if the property is missing. +bus-width: Number of data lines, default assumed is 1 if the property is missing. cd-gpios: GPIOs for card detection wp-gpios: GPIOs for write protection ti,non-removable: non-removable slot (like eMMC) @@ -27,7 +27,7 @@ Example: reg = <0x4809c000 0x400>; ti,hwmods = "mmc1"; ti,dual-volt; - ti,bus-width = <4>; + bus-width = <4>; vmmc-supply = <&vmmc>; /* phandle to regulator node */ ti,non-removable; }; diff --git a/Documentation/devicetree/bindings/mtd/orion-nand.txt b/Documentation/devicetree/bindings/mtd/orion-nand.txt new file mode 100644 index 000000000000..b2356b7d2fa4 --- /dev/null +++ b/Documentation/devicetree/bindings/mtd/orion-nand.txt @@ -0,0 +1,50 @@ +NAND support for Marvell Orion SoC platforms + +Required properties: +- compatible : "mrvl,orion-nand". +- reg : Base physical address of the NAND and length of memory mapped + region + +Optional properties: +- cle : Address line number connected to CLE. Default is 0 +- ale : Address line number connected to ALE. Default is 1 +- bank-width : Width in bytes of the device. Default is 1 +- chip-delay : Chip dependent delay for transferring data from array to read + registers in usecs + +The device tree may optionally contain sub-nodes describing partitions of the +address space. See partition.txt for more detail. + +Example: + +nand@f4000000 { + #address-cells = <1>; + #size-cells = <1>; + cle = <0>; + ale = <1>; + bank-width = <1>; + chip-delay = <25>; + compatible = "mrvl,orion-nand"; + reg = <0xf4000000 0x400>; + + partition@0 { + label = "u-boot"; + reg = <0x0000000 0x100000>; + read-only; + }; + + partition@100000 { + label = "uImage"; + reg = <0x0100000 0x200000>; + }; + + partition@300000 { + label = "dtb"; + reg = <0x0300000 0x100000>; + }; + + partition@400000 { + label = "root"; + reg = <0x0400000 0x7d00000>; + }; +}; diff --git a/Documentation/devicetree/bindings/net/can/fsl-flexcan.txt b/Documentation/devicetree/bindings/net/can/fsl-flexcan.txt index 1ad80d5865a9..f31b686d4556 100644 --- a/Documentation/devicetree/bindings/net/can/fsl-flexcan.txt +++ b/Documentation/devicetree/bindings/net/can/fsl-flexcan.txt @@ -1,4 +1,4 @@ -Flexcan CAN contoller on Freescale's ARM and PowerPC system-on-a-chip (SOC). +Flexcan CAN controller on Freescale's ARM and PowerPC system-on-a-chip (SOC). Required properties: diff --git a/Documentation/devicetree/bindings/net/fsl-fec.txt b/Documentation/devicetree/bindings/net/fsl-fec.txt index de439517dff0..7ab9e1a2d8be 100644 --- a/Documentation/devicetree/bindings/net/fsl-fec.txt +++ b/Documentation/devicetree/bindings/net/fsl-fec.txt @@ -14,7 +14,7 @@ Optional properties: Example: -fec@83fec000 { +ethernet@83fec000 { compatible = "fsl,imx51-fec", "fsl,imx27-fec"; reg = <0x83fec000 0x4000>; interrupts = <87>; diff --git a/Documentation/devicetree/bindings/net/lpc-eth.txt b/Documentation/devicetree/bindings/net/lpc-eth.txt new file mode 100644 index 000000000000..585021acd178 --- /dev/null +++ b/Documentation/devicetree/bindings/net/lpc-eth.txt @@ -0,0 +1,24 @@ +* NXP LPC32xx SoC Ethernet Controller + +Required properties: +- compatible: Should be "nxp,lpc-eth" +- reg: Address and length of the register set for the device +- interrupts: Should contain ethernet controller interrupt + +Optional properties: +- phy-mode: String, operation mode of the PHY interface. + Supported values are: "mii", "rmii" (default) +- use-iram: Use LPC32xx internal SRAM (IRAM) for DMA buffering +- local-mac-address : 6 bytes, mac address + +Example: + + mac: ethernet@31060000 { + compatible = "nxp,lpc-eth"; + reg = <0x31060000 0x1000>; + interrupt-parent = <&mic>; + interrupts = <29 0>; + + phy-mode = "rmii"; + use-iram; + }; diff --git a/Documentation/devicetree/bindings/net/mdio-mux-gpio.txt b/Documentation/devicetree/bindings/net/mdio-mux-gpio.txt new file mode 100644 index 000000000000..79384113c2b0 --- /dev/null +++ b/Documentation/devicetree/bindings/net/mdio-mux-gpio.txt @@ -0,0 +1,127 @@ +Properties for an MDIO bus multiplexer/switch controlled by GPIO pins. + +This is a special case of a MDIO bus multiplexer. One or more GPIO +lines are used to control which child bus is connected. + +Required properties in addition to the generic multiplexer properties: + +- compatible : mdio-mux-gpio. +- gpios : GPIO specifiers for each GPIO line. One or more must be specified. + + +Example : + + /* The parent MDIO bus. */ + smi1: mdio@1180000001900 { + compatible = "cavium,octeon-3860-mdio"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x11800 0x00001900 0x0 0x40>; + }; + + /* + An NXP sn74cbtlv3253 dual 1-of-4 switch controlled by a + pair of GPIO lines. Child busses 2 and 3 populated with 4 + PHYs each. + */ + mdio-mux { + compatible = "mdio-mux-gpio"; + gpios = <&gpio1 3 0>, <&gpio1 4 0>; + mdio-parent-bus = <&smi1>; + #address-cells = <1>; + #size-cells = <0>; + + mdio@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + + phy11: ethernet-phy@1 { + reg = <1>; + compatible = "marvell,88e1149r"; + marvell,reg-init = <3 0x10 0 0x5777>, + <3 0x11 0 0x00aa>, + <3 0x12 0 0x4105>, + <3 0x13 0 0x0a60>; + interrupt-parent = <&gpio>; + interrupts = <10 8>; /* Pin 10, active low */ + }; + phy12: ethernet-phy@2 { + reg = <2>; + compatible = "marvell,88e1149r"; + marvell,reg-init = <3 0x10 0 0x5777>, + <3 0x11 0 0x00aa>, + <3 0x12 0 0x4105>, + <3 0x13 0 0x0a60>; + interrupt-parent = <&gpio>; + interrupts = <10 8>; /* Pin 10, active low */ + }; + phy13: ethernet-phy@3 { + reg = <3>; + compatible = "marvell,88e1149r"; + marvell,reg-init = <3 0x10 0 0x5777>, + <3 0x11 0 0x00aa>, + <3 0x12 0 0x4105>, + <3 0x13 0 0x0a60>; + interrupt-parent = <&gpio>; + interrupts = <10 8>; /* Pin 10, active low */ + }; + phy14: ethernet-phy@4 { + reg = <4>; + compatible = "marvell,88e1149r"; + marvell,reg-init = <3 0x10 0 0x5777>, + <3 0x11 0 0x00aa>, + <3 0x12 0 0x4105>, + <3 0x13 0 0x0a60>; + interrupt-parent = <&gpio>; + interrupts = <10 8>; /* Pin 10, active low */ + }; + }; + + mdio@3 { + reg = <3>; + #address-cells = <1>; + #size-cells = <0>; + + phy21: ethernet-phy@1 { + reg = <1>; + compatible = "marvell,88e1149r"; + marvell,reg-init = <3 0x10 0 0x5777>, + <3 0x11 0 0x00aa>, + <3 0x12 0 0x4105>, + <3 0x13 0 0x0a60>; + interrupt-parent = <&gpio>; + interrupts = <12 8>; /* Pin 12, active low */ + }; + phy22: ethernet-phy@2 { + reg = <2>; + compatible = "marvell,88e1149r"; + marvell,reg-init = <3 0x10 0 0x5777>, + <3 0x11 0 0x00aa>, + <3 0x12 0 0x4105>, + <3 0x13 0 0x0a60>; + interrupt-parent = <&gpio>; + interrupts = <12 8>; /* Pin 12, active low */ + }; + phy23: ethernet-phy@3 { + reg = <3>; + compatible = "marvell,88e1149r"; + marvell,reg-init = <3 0x10 0 0x5777>, + <3 0x11 0 0x00aa>, + <3 0x12 0 0x4105>, + <3 0x13 0 0x0a60>; + interrupt-parent = <&gpio>; + interrupts = <12 8>; /* Pin 12, active low */ + }; + phy24: ethernet-phy@4 { + reg = <4>; + compatible = "marvell,88e1149r"; + marvell,reg-init = <3 0x10 0 0x5777>, + <3 0x11 0 0x00aa>, + <3 0x12 0 0x4105>, + <3 0x13 0 0x0a60>; + interrupt-parent = <&gpio>; + interrupts = <12 8>; /* Pin 12, active low */ + }; + }; + }; diff --git a/Documentation/devicetree/bindings/net/mdio-mux.txt b/Documentation/devicetree/bindings/net/mdio-mux.txt new file mode 100644 index 000000000000..f65606f8d632 --- /dev/null +++ b/Documentation/devicetree/bindings/net/mdio-mux.txt @@ -0,0 +1,136 @@ +Common MDIO bus multiplexer/switch properties. + +An MDIO bus multiplexer/switch will have several child busses that are +numbered uniquely in a device dependent manner. The nodes for an MDIO +bus multiplexer/switch will have one child node for each child bus. + +Required properties: +- mdio-parent-bus : phandle to the parent MDIO bus. +- #address-cells = <1>; +- #size-cells = <0>; + +Optional properties: +- Other properties specific to the multiplexer/switch hardware. + +Required properties for child nodes: +- #address-cells = <1>; +- #size-cells = <0>; +- reg : The sub-bus number. + + +Example : + + /* The parent MDIO bus. */ + smi1: mdio@1180000001900 { + compatible = "cavium,octeon-3860-mdio"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x11800 0x00001900 0x0 0x40>; + }; + + /* + An NXP sn74cbtlv3253 dual 1-of-4 switch controlled by a + pair of GPIO lines. Child busses 2 and 3 populated with 4 + PHYs each. + */ + mdio-mux { + compatible = "mdio-mux-gpio"; + gpios = <&gpio1 3 0>, <&gpio1 4 0>; + mdio-parent-bus = <&smi1>; + #address-cells = <1>; + #size-cells = <0>; + + mdio@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + + phy11: ethernet-phy@1 { + reg = <1>; + compatible = "marvell,88e1149r"; + marvell,reg-init = <3 0x10 0 0x5777>, + <3 0x11 0 0x00aa>, + <3 0x12 0 0x4105>, + <3 0x13 0 0x0a60>; + interrupt-parent = <&gpio>; + interrupts = <10 8>; /* Pin 10, active low */ + }; + phy12: ethernet-phy@2 { + reg = <2>; + compatible = "marvell,88e1149r"; + marvell,reg-init = <3 0x10 0 0x5777>, + <3 0x11 0 0x00aa>, + <3 0x12 0 0x4105>, + <3 0x13 0 0x0a60>; + interrupt-parent = <&gpio>; + interrupts = <10 8>; /* Pin 10, active low */ + }; + phy13: ethernet-phy@3 { + reg = <3>; + compatible = "marvell,88e1149r"; + marvell,reg-init = <3 0x10 0 0x5777>, + <3 0x11 0 0x00aa>, + <3 0x12 0 0x4105>, + <3 0x13 0 0x0a60>; + interrupt-parent = <&gpio>; + interrupts = <10 8>; /* Pin 10, active low */ + }; + phy14: ethernet-phy@4 { + reg = <4>; + compatible = "marvell,88e1149r"; + marvell,reg-init = <3 0x10 0 0x5777>, + <3 0x11 0 0x00aa>, + <3 0x12 0 0x4105>, + <3 0x13 0 0x0a60>; + interrupt-parent = <&gpio>; + interrupts = <10 8>; /* Pin 10, active low */ + }; + }; + + mdio@3 { + reg = <3>; + #address-cells = <1>; + #size-cells = <0>; + + phy21: ethernet-phy@1 { + reg = <1>; + compatible = "marvell,88e1149r"; + marvell,reg-init = <3 0x10 0 0x5777>, + <3 0x11 0 0x00aa>, + <3 0x12 0 0x4105>, + <3 0x13 0 0x0a60>; + interrupt-parent = <&gpio>; + interrupts = <12 8>; /* Pin 12, active low */ + }; + phy22: ethernet-phy@2 { + reg = <2>; + compatible = "marvell,88e1149r"; + marvell,reg-init = <3 0x10 0 0x5777>, + <3 0x11 0 0x00aa>, + <3 0x12 0 0x4105>, + <3 0x13 0 0x0a60>; + interrupt-parent = <&gpio>; + interrupts = <12 8>; /* Pin 12, active low */ + }; + phy23: ethernet-phy@3 { + reg = <3>; + compatible = "marvell,88e1149r"; + marvell,reg-init = <3 0x10 0 0x5777>, + <3 0x11 0 0x00aa>, + <3 0x12 0 0x4105>, + <3 0x13 0 0x0a60>; + interrupt-parent = <&gpio>; + interrupts = <12 8>; /* Pin 12, active low */ + }; + phy24: ethernet-phy@4 { + reg = <4>; + compatible = "marvell,88e1149r"; + marvell,reg-init = <3 0x10 0 0x5777>, + <3 0x11 0 0x00aa>, + <3 0x12 0 0x4105>, + <3 0x13 0 0x0a60>; + interrupt-parent = <&gpio>; + interrupts = <12 8>; /* Pin 12, active low */ + }; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx51-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/fsl,imx51-pinctrl.txt new file mode 100644 index 000000000000..b96fa4c31745 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx51-pinctrl.txt @@ -0,0 +1,787 @@ +* Freescale IMX51 IOMUX Controller + +Please refer to fsl,imx-pinctrl.txt in this directory for common binding part +and usage. + +Required properties: +- compatible: "fsl,imx51-iomuxc" +- fsl,pins: two integers array, represents a group of pins mux and config + setting. The format is fsl,pins = <PIN_FUNC_ID CONFIG>, PIN_FUNC_ID is a + pin working on a specific function, CONFIG is the pad setting value like + pull-up for this pin. Please refer to imx51 datasheet for the valid pad + config settings. + +CONFIG bits definition: +PAD_CTL_HVE (1 << 13) +PAD_CTL_HYS (1 << 8) +PAD_CTL_PKE (1 << 7) +PAD_CTL_PUE (1 << 6) +PAD_CTL_PUS_100K_DOWN (0 << 4) +PAD_CTL_PUS_47K_UP (1 << 4) +PAD_CTL_PUS_100K_UP (2 << 4) +PAD_CTL_PUS_22K_UP (3 << 4) +PAD_CTL_ODE (1 << 3) +PAD_CTL_DSE_LOW (0 << 1) +PAD_CTL_DSE_MED (1 << 1) +PAD_CTL_DSE_HIGH (2 << 1) +PAD_CTL_DSE_MAX (3 << 1) +PAD_CTL_SRE_FAST (1 << 0) +PAD_CTL_SRE_SLOW (0 << 0) + +See below for available PIN_FUNC_ID for imx51: +MX51_PAD_EIM_D16__AUD4_RXFS 0 +MX51_PAD_EIM_D16__AUD5_TXD 1 +MX51_PAD_EIM_D16__EIM_D16 2 +MX51_PAD_EIM_D16__GPIO2_0 3 +MX51_PAD_EIM_D16__I2C1_SDA 4 +MX51_PAD_EIM_D16__UART2_CTS 5 +MX51_PAD_EIM_D16__USBH2_DATA0 6 +MX51_PAD_EIM_D17__AUD5_RXD 7 +MX51_PAD_EIM_D17__EIM_D17 8 +MX51_PAD_EIM_D17__GPIO2_1 9 +MX51_PAD_EIM_D17__UART2_RXD 10 +MX51_PAD_EIM_D17__UART3_CTS 11 +MX51_PAD_EIM_D17__USBH2_DATA1 12 +MX51_PAD_EIM_D18__AUD5_TXC 13 +MX51_PAD_EIM_D18__EIM_D18 14 +MX51_PAD_EIM_D18__GPIO2_2 15 +MX51_PAD_EIM_D18__UART2_TXD 16 +MX51_PAD_EIM_D18__UART3_RTS 17 +MX51_PAD_EIM_D18__USBH2_DATA2 18 +MX51_PAD_EIM_D19__AUD4_RXC 19 +MX51_PAD_EIM_D19__AUD5_TXFS 20 +MX51_PAD_EIM_D19__EIM_D19 21 +MX51_PAD_EIM_D19__GPIO2_3 22 +MX51_PAD_EIM_D19__I2C1_SCL 23 +MX51_PAD_EIM_D19__UART2_RTS 24 +MX51_PAD_EIM_D19__USBH2_DATA3 25 +MX51_PAD_EIM_D20__AUD4_TXD 26 +MX51_PAD_EIM_D20__EIM_D20 27 +MX51_PAD_EIM_D20__GPIO2_4 28 +MX51_PAD_EIM_D20__SRTC_ALARM_DEB 29 +MX51_PAD_EIM_D20__USBH2_DATA4 30 +MX51_PAD_EIM_D21__AUD4_RXD 31 +MX51_PAD_EIM_D21__EIM_D21 32 +MX51_PAD_EIM_D21__GPIO2_5 33 +MX51_PAD_EIM_D21__SRTC_ALARM_DEB 34 +MX51_PAD_EIM_D21__USBH2_DATA5 35 +MX51_PAD_EIM_D22__AUD4_TXC 36 +MX51_PAD_EIM_D22__EIM_D22 37 +MX51_PAD_EIM_D22__GPIO2_6 38 +MX51_PAD_EIM_D22__USBH2_DATA6 39 +MX51_PAD_EIM_D23__AUD4_TXFS 40 +MX51_PAD_EIM_D23__EIM_D23 41 +MX51_PAD_EIM_D23__GPIO2_7 42 +MX51_PAD_EIM_D23__SPDIF_OUT1 43 +MX51_PAD_EIM_D23__USBH2_DATA7 44 +MX51_PAD_EIM_D24__AUD6_RXFS 45 +MX51_PAD_EIM_D24__EIM_D24 46 +MX51_PAD_EIM_D24__GPIO2_8 47 +MX51_PAD_EIM_D24__I2C2_SDA 48 +MX51_PAD_EIM_D24__UART3_CTS 49 +MX51_PAD_EIM_D24__USBOTG_DATA0 50 +MX51_PAD_EIM_D25__EIM_D25 51 +MX51_PAD_EIM_D25__KEY_COL6 52 +MX51_PAD_EIM_D25__UART2_CTS 53 +MX51_PAD_EIM_D25__UART3_RXD 54 +MX51_PAD_EIM_D25__USBOTG_DATA1 55 +MX51_PAD_EIM_D26__EIM_D26 56 +MX51_PAD_EIM_D26__KEY_COL7 57 +MX51_PAD_EIM_D26__UART2_RTS 58 +MX51_PAD_EIM_D26__UART3_TXD 59 +MX51_PAD_EIM_D26__USBOTG_DATA2 60 +MX51_PAD_EIM_D27__AUD6_RXC 61 +MX51_PAD_EIM_D27__EIM_D27 62 +MX51_PAD_EIM_D27__GPIO2_9 63 +MX51_PAD_EIM_D27__I2C2_SCL 64 +MX51_PAD_EIM_D27__UART3_RTS 65 +MX51_PAD_EIM_D27__USBOTG_DATA3 66 +MX51_PAD_EIM_D28__AUD6_TXD 67 +MX51_PAD_EIM_D28__EIM_D28 68 +MX51_PAD_EIM_D28__KEY_ROW4 69 +MX51_PAD_EIM_D28__USBOTG_DATA4 70 +MX51_PAD_EIM_D29__AUD6_RXD 71 +MX51_PAD_EIM_D29__EIM_D29 72 +MX51_PAD_EIM_D29__KEY_ROW5 73 +MX51_PAD_EIM_D29__USBOTG_DATA5 74 +MX51_PAD_EIM_D30__AUD6_TXC 75 +MX51_PAD_EIM_D30__EIM_D30 76 +MX51_PAD_EIM_D30__KEY_ROW6 77 +MX51_PAD_EIM_D30__USBOTG_DATA6 78 +MX51_PAD_EIM_D31__AUD6_TXFS 79 +MX51_PAD_EIM_D31__EIM_D31 80 +MX51_PAD_EIM_D31__KEY_ROW7 81 +MX51_PAD_EIM_D31__USBOTG_DATA7 82 +MX51_PAD_EIM_A16__EIM_A16 83 +MX51_PAD_EIM_A16__GPIO2_10 84 +MX51_PAD_EIM_A16__OSC_FREQ_SEL0 85 +MX51_PAD_EIM_A17__EIM_A17 86 +MX51_PAD_EIM_A17__GPIO2_11 87 +MX51_PAD_EIM_A17__OSC_FREQ_SEL1 88 +MX51_PAD_EIM_A18__BOOT_LPB0 89 +MX51_PAD_EIM_A18__EIM_A18 90 +MX51_PAD_EIM_A18__GPIO2_12 91 +MX51_PAD_EIM_A19__BOOT_LPB1 92 +MX51_PAD_EIM_A19__EIM_A19 93 +MX51_PAD_EIM_A19__GPIO2_13 94 +MX51_PAD_EIM_A20__BOOT_UART_SRC0 95 +MX51_PAD_EIM_A20__EIM_A20 96 +MX51_PAD_EIM_A20__GPIO2_14 97 +MX51_PAD_EIM_A21__BOOT_UART_SRC1 98 +MX51_PAD_EIM_A21__EIM_A21 99 +MX51_PAD_EIM_A21__GPIO2_15 100 +MX51_PAD_EIM_A22__EIM_A22 101 +MX51_PAD_EIM_A22__GPIO2_16 102 +MX51_PAD_EIM_A23__BOOT_HPN_EN 103 +MX51_PAD_EIM_A23__EIM_A23 104 +MX51_PAD_EIM_A23__GPIO2_17 105 +MX51_PAD_EIM_A24__EIM_A24 106 +MX51_PAD_EIM_A24__GPIO2_18 107 +MX51_PAD_EIM_A24__USBH2_CLK 108 +MX51_PAD_EIM_A25__DISP1_PIN4 109 +MX51_PAD_EIM_A25__EIM_A25 110 +MX51_PAD_EIM_A25__GPIO2_19 111 +MX51_PAD_EIM_A25__USBH2_DIR 112 +MX51_PAD_EIM_A26__CSI1_DATA_EN 113 +MX51_PAD_EIM_A26__DISP2_EXT_CLK 114 +MX51_PAD_EIM_A26__EIM_A26 115 +MX51_PAD_EIM_A26__GPIO2_20 116 +MX51_PAD_EIM_A26__USBH2_STP 117 +MX51_PAD_EIM_A27__CSI2_DATA_EN 118 +MX51_PAD_EIM_A27__DISP1_PIN1 119 +MX51_PAD_EIM_A27__EIM_A27 120 +MX51_PAD_EIM_A27__GPIO2_21 121 +MX51_PAD_EIM_A27__USBH2_NXT 122 +MX51_PAD_EIM_EB0__EIM_EB0 123 +MX51_PAD_EIM_EB1__EIM_EB1 124 +MX51_PAD_EIM_EB2__AUD5_RXFS 125 +MX51_PAD_EIM_EB2__CSI1_D2 126 +MX51_PAD_EIM_EB2__EIM_EB2 127 +MX51_PAD_EIM_EB2__FEC_MDIO 128 +MX51_PAD_EIM_EB2__GPIO2_22 129 +MX51_PAD_EIM_EB2__GPT_CMPOUT1 130 +MX51_PAD_EIM_EB3__AUD5_RXC 131 +MX51_PAD_EIM_EB3__CSI1_D3 132 +MX51_PAD_EIM_EB3__EIM_EB3 133 +MX51_PAD_EIM_EB3__FEC_RDATA1 134 +MX51_PAD_EIM_EB3__GPIO2_23 135 +MX51_PAD_EIM_EB3__GPT_CMPOUT2 136 +MX51_PAD_EIM_OE__EIM_OE 137 +MX51_PAD_EIM_OE__GPIO2_24 138 +MX51_PAD_EIM_CS0__EIM_CS0 139 +MX51_PAD_EIM_CS0__GPIO2_25 140 +MX51_PAD_EIM_CS1__EIM_CS1 141 +MX51_PAD_EIM_CS1__GPIO2_26 142 +MX51_PAD_EIM_CS2__AUD5_TXD 143 +MX51_PAD_EIM_CS2__CSI1_D4 144 +MX51_PAD_EIM_CS2__EIM_CS2 145 +MX51_PAD_EIM_CS2__FEC_RDATA2 146 +MX51_PAD_EIM_CS2__GPIO2_27 147 +MX51_PAD_EIM_CS2__USBOTG_STP 148 +MX51_PAD_EIM_CS3__AUD5_RXD 149 +MX51_PAD_EIM_CS3__CSI1_D5 150 +MX51_PAD_EIM_CS3__EIM_CS3 151 +MX51_PAD_EIM_CS3__FEC_RDATA3 152 +MX51_PAD_EIM_CS3__GPIO2_28 153 +MX51_PAD_EIM_CS3__USBOTG_NXT 154 +MX51_PAD_EIM_CS4__AUD5_TXC 155 +MX51_PAD_EIM_CS4__CSI1_D6 156 +MX51_PAD_EIM_CS4__EIM_CS4 157 +MX51_PAD_EIM_CS4__FEC_RX_ER 158 +MX51_PAD_EIM_CS4__GPIO2_29 159 +MX51_PAD_EIM_CS4__USBOTG_CLK 160 +MX51_PAD_EIM_CS5__AUD5_TXFS 161 +MX51_PAD_EIM_CS5__CSI1_D7 162 +MX51_PAD_EIM_CS5__DISP1_EXT_CLK 163 +MX51_PAD_EIM_CS5__EIM_CS5 164 +MX51_PAD_EIM_CS5__FEC_CRS 165 +MX51_PAD_EIM_CS5__GPIO2_30 166 +MX51_PAD_EIM_CS5__USBOTG_DIR 167 +MX51_PAD_EIM_DTACK__EIM_DTACK 168 +MX51_PAD_EIM_DTACK__GPIO2_31 169 +MX51_PAD_EIM_LBA__EIM_LBA 170 +MX51_PAD_EIM_LBA__GPIO3_1 171 +MX51_PAD_EIM_CRE__EIM_CRE 172 +MX51_PAD_EIM_CRE__GPIO3_2 173 +MX51_PAD_DRAM_CS1__DRAM_CS1 174 +MX51_PAD_NANDF_WE_B__GPIO3_3 175 +MX51_PAD_NANDF_WE_B__NANDF_WE_B 176 +MX51_PAD_NANDF_WE_B__PATA_DIOW 177 +MX51_PAD_NANDF_WE_B__SD3_DATA0 178 +MX51_PAD_NANDF_RE_B__GPIO3_4 179 +MX51_PAD_NANDF_RE_B__NANDF_RE_B 180 +MX51_PAD_NANDF_RE_B__PATA_DIOR 181 +MX51_PAD_NANDF_RE_B__SD3_DATA1 182 +MX51_PAD_NANDF_ALE__GPIO3_5 183 +MX51_PAD_NANDF_ALE__NANDF_ALE 184 +MX51_PAD_NANDF_ALE__PATA_BUFFER_EN 185 +MX51_PAD_NANDF_CLE__GPIO3_6 186 +MX51_PAD_NANDF_CLE__NANDF_CLE 187 +MX51_PAD_NANDF_CLE__PATA_RESET_B 188 +MX51_PAD_NANDF_WP_B__GPIO3_7 189 +MX51_PAD_NANDF_WP_B__NANDF_WP_B 190 +MX51_PAD_NANDF_WP_B__PATA_DMACK 191 +MX51_PAD_NANDF_WP_B__SD3_DATA2 192 +MX51_PAD_NANDF_RB0__ECSPI2_SS1 193 +MX51_PAD_NANDF_RB0__GPIO3_8 194 +MX51_PAD_NANDF_RB0__NANDF_RB0 195 +MX51_PAD_NANDF_RB0__PATA_DMARQ 196 +MX51_PAD_NANDF_RB0__SD3_DATA3 197 +MX51_PAD_NANDF_RB1__CSPI_MOSI 198 +MX51_PAD_NANDF_RB1__ECSPI2_RDY 199 +MX51_PAD_NANDF_RB1__GPIO3_9 200 +MX51_PAD_NANDF_RB1__NANDF_RB1 201 +MX51_PAD_NANDF_RB1__PATA_IORDY 202 +MX51_PAD_NANDF_RB1__SD4_CMD 203 +MX51_PAD_NANDF_RB2__DISP2_WAIT 204 +MX51_PAD_NANDF_RB2__ECSPI2_SCLK 205 +MX51_PAD_NANDF_RB2__FEC_COL 206 +MX51_PAD_NANDF_RB2__GPIO3_10 207 +MX51_PAD_NANDF_RB2__NANDF_RB2 208 +MX51_PAD_NANDF_RB2__USBH3_H3_DP 209 +MX51_PAD_NANDF_RB2__USBH3_NXT 210 +MX51_PAD_NANDF_RB3__DISP1_WAIT 211 +MX51_PAD_NANDF_RB3__ECSPI2_MISO 212 +MX51_PAD_NANDF_RB3__FEC_RX_CLK 213 +MX51_PAD_NANDF_RB3__GPIO3_11 214 +MX51_PAD_NANDF_RB3__NANDF_RB3 215 +MX51_PAD_NANDF_RB3__USBH3_CLK 216 +MX51_PAD_NANDF_RB3__USBH3_H3_DM 217 +MX51_PAD_GPIO_NAND__GPIO_NAND 218 +MX51_PAD_GPIO_NAND__PATA_INTRQ 219 +MX51_PAD_NANDF_CS0__GPIO3_16 220 +MX51_PAD_NANDF_CS0__NANDF_CS0 221 +MX51_PAD_NANDF_CS1__GPIO3_17 222 +MX51_PAD_NANDF_CS1__NANDF_CS1 223 +MX51_PAD_NANDF_CS2__CSPI_SCLK 224 +MX51_PAD_NANDF_CS2__FEC_TX_ER 225 +MX51_PAD_NANDF_CS2__GPIO3_18 226 +MX51_PAD_NANDF_CS2__NANDF_CS2 227 +MX51_PAD_NANDF_CS2__PATA_CS_0 228 +MX51_PAD_NANDF_CS2__SD4_CLK 229 +MX51_PAD_NANDF_CS2__USBH3_H1_DP 230 +MX51_PAD_NANDF_CS3__FEC_MDC 231 +MX51_PAD_NANDF_CS3__GPIO3_19 232 +MX51_PAD_NANDF_CS3__NANDF_CS3 233 +MX51_PAD_NANDF_CS3__PATA_CS_1 234 +MX51_PAD_NANDF_CS3__SD4_DAT0 235 +MX51_PAD_NANDF_CS3__USBH3_H1_DM 236 +MX51_PAD_NANDF_CS4__FEC_TDATA1 237 +MX51_PAD_NANDF_CS4__GPIO3_20 238 +MX51_PAD_NANDF_CS4__NANDF_CS4 239 +MX51_PAD_NANDF_CS4__PATA_DA_0 240 +MX51_PAD_NANDF_CS4__SD4_DAT1 241 +MX51_PAD_NANDF_CS4__USBH3_STP 242 +MX51_PAD_NANDF_CS5__FEC_TDATA2 243 +MX51_PAD_NANDF_CS5__GPIO3_21 244 +MX51_PAD_NANDF_CS5__NANDF_CS5 245 +MX51_PAD_NANDF_CS5__PATA_DA_1 246 +MX51_PAD_NANDF_CS5__SD4_DAT2 247 +MX51_PAD_NANDF_CS5__USBH3_DIR 248 +MX51_PAD_NANDF_CS6__CSPI_SS3 249 +MX51_PAD_NANDF_CS6__FEC_TDATA3 250 +MX51_PAD_NANDF_CS6__GPIO3_22 251 +MX51_PAD_NANDF_CS6__NANDF_CS6 252 +MX51_PAD_NANDF_CS6__PATA_DA_2 253 +MX51_PAD_NANDF_CS6__SD4_DAT3 254 +MX51_PAD_NANDF_CS7__FEC_TX_EN 255 +MX51_PAD_NANDF_CS7__GPIO3_23 256 +MX51_PAD_NANDF_CS7__NANDF_CS7 257 +MX51_PAD_NANDF_CS7__SD3_CLK 258 +MX51_PAD_NANDF_RDY_INT__ECSPI2_SS0 259 +MX51_PAD_NANDF_RDY_INT__FEC_TX_CLK 260 +MX51_PAD_NANDF_RDY_INT__GPIO3_24 261 +MX51_PAD_NANDF_RDY_INT__NANDF_RDY_INT 262 +MX51_PAD_NANDF_RDY_INT__SD3_CMD 263 +MX51_PAD_NANDF_D15__ECSPI2_MOSI 264 +MX51_PAD_NANDF_D15__GPIO3_25 265 +MX51_PAD_NANDF_D15__NANDF_D15 266 +MX51_PAD_NANDF_D15__PATA_DATA15 267 +MX51_PAD_NANDF_D15__SD3_DAT7 268 +MX51_PAD_NANDF_D14__ECSPI2_SS3 269 +MX51_PAD_NANDF_D14__GPIO3_26 270 +MX51_PAD_NANDF_D14__NANDF_D14 271 +MX51_PAD_NANDF_D14__PATA_DATA14 272 +MX51_PAD_NANDF_D14__SD3_DAT6 273 +MX51_PAD_NANDF_D13__ECSPI2_SS2 274 +MX51_PAD_NANDF_D13__GPIO3_27 275 +MX51_PAD_NANDF_D13__NANDF_D13 276 +MX51_PAD_NANDF_D13__PATA_DATA13 277 +MX51_PAD_NANDF_D13__SD3_DAT5 278 +MX51_PAD_NANDF_D12__ECSPI2_SS1 279 +MX51_PAD_NANDF_D12__GPIO3_28 280 +MX51_PAD_NANDF_D12__NANDF_D12 281 +MX51_PAD_NANDF_D12__PATA_DATA12 282 +MX51_PAD_NANDF_D12__SD3_DAT4 283 +MX51_PAD_NANDF_D11__FEC_RX_DV 284 +MX51_PAD_NANDF_D11__GPIO3_29 285 +MX51_PAD_NANDF_D11__NANDF_D11 286 +MX51_PAD_NANDF_D11__PATA_DATA11 287 +MX51_PAD_NANDF_D11__SD3_DATA3 288 +MX51_PAD_NANDF_D10__GPIO3_30 289 +MX51_PAD_NANDF_D10__NANDF_D10 290 +MX51_PAD_NANDF_D10__PATA_DATA10 291 +MX51_PAD_NANDF_D10__SD3_DATA2 292 +MX51_PAD_NANDF_D9__FEC_RDATA0 293 +MX51_PAD_NANDF_D9__GPIO3_31 294 +MX51_PAD_NANDF_D9__NANDF_D9 295 +MX51_PAD_NANDF_D9__PATA_DATA9 296 +MX51_PAD_NANDF_D9__SD3_DATA1 297 +MX51_PAD_NANDF_D8__FEC_TDATA0 298 +MX51_PAD_NANDF_D8__GPIO4_0 299 +MX51_PAD_NANDF_D8__NANDF_D8 300 +MX51_PAD_NANDF_D8__PATA_DATA8 301 +MX51_PAD_NANDF_D8__SD3_DATA0 302 +MX51_PAD_NANDF_D7__GPIO4_1 303 +MX51_PAD_NANDF_D7__NANDF_D7 304 +MX51_PAD_NANDF_D7__PATA_DATA7 305 +MX51_PAD_NANDF_D7__USBH3_DATA0 306 +MX51_PAD_NANDF_D6__GPIO4_2 307 +MX51_PAD_NANDF_D6__NANDF_D6 308 +MX51_PAD_NANDF_D6__PATA_DATA6 309 +MX51_PAD_NANDF_D6__SD4_LCTL 310 +MX51_PAD_NANDF_D6__USBH3_DATA1 311 +MX51_PAD_NANDF_D5__GPIO4_3 312 +MX51_PAD_NANDF_D5__NANDF_D5 313 +MX51_PAD_NANDF_D5__PATA_DATA5 314 +MX51_PAD_NANDF_D5__SD4_WP 315 +MX51_PAD_NANDF_D5__USBH3_DATA2 316 +MX51_PAD_NANDF_D4__GPIO4_4 317 +MX51_PAD_NANDF_D4__NANDF_D4 318 +MX51_PAD_NANDF_D4__PATA_DATA4 319 +MX51_PAD_NANDF_D4__SD4_CD 320 +MX51_PAD_NANDF_D4__USBH3_DATA3 321 +MX51_PAD_NANDF_D3__GPIO4_5 322 +MX51_PAD_NANDF_D3__NANDF_D3 323 +MX51_PAD_NANDF_D3__PATA_DATA3 324 +MX51_PAD_NANDF_D3__SD4_DAT4 325 +MX51_PAD_NANDF_D3__USBH3_DATA4 326 +MX51_PAD_NANDF_D2__GPIO4_6 327 +MX51_PAD_NANDF_D2__NANDF_D2 328 +MX51_PAD_NANDF_D2__PATA_DATA2 329 +MX51_PAD_NANDF_D2__SD4_DAT5 330 +MX51_PAD_NANDF_D2__USBH3_DATA5 331 +MX51_PAD_NANDF_D1__GPIO4_7 332 +MX51_PAD_NANDF_D1__NANDF_D1 333 +MX51_PAD_NANDF_D1__PATA_DATA1 334 +MX51_PAD_NANDF_D1__SD4_DAT6 335 +MX51_PAD_NANDF_D1__USBH3_DATA6 336 +MX51_PAD_NANDF_D0__GPIO4_8 337 +MX51_PAD_NANDF_D0__NANDF_D0 338 +MX51_PAD_NANDF_D0__PATA_DATA0 339 +MX51_PAD_NANDF_D0__SD4_DAT7 340 +MX51_PAD_NANDF_D0__USBH3_DATA7 341 +MX51_PAD_CSI1_D8__CSI1_D8 342 +MX51_PAD_CSI1_D8__GPIO3_12 343 +MX51_PAD_CSI1_D9__CSI1_D9 344 +MX51_PAD_CSI1_D9__GPIO3_13 345 +MX51_PAD_CSI1_D10__CSI1_D10 346 +MX51_PAD_CSI1_D11__CSI1_D11 347 +MX51_PAD_CSI1_D12__CSI1_D12 348 +MX51_PAD_CSI1_D13__CSI1_D13 349 +MX51_PAD_CSI1_D14__CSI1_D14 350 +MX51_PAD_CSI1_D15__CSI1_D15 351 +MX51_PAD_CSI1_D16__CSI1_D16 352 +MX51_PAD_CSI1_D17__CSI1_D17 353 +MX51_PAD_CSI1_D18__CSI1_D18 354 +MX51_PAD_CSI1_D19__CSI1_D19 355 +MX51_PAD_CSI1_VSYNC__CSI1_VSYNC 356 +MX51_PAD_CSI1_VSYNC__GPIO3_14 357 +MX51_PAD_CSI1_HSYNC__CSI1_HSYNC 358 +MX51_PAD_CSI1_HSYNC__GPIO3_15 359 +MX51_PAD_CSI1_PIXCLK__CSI1_PIXCLK 360 +MX51_PAD_CSI1_MCLK__CSI1_MCLK 361 +MX51_PAD_CSI2_D12__CSI2_D12 362 +MX51_PAD_CSI2_D12__GPIO4_9 363 +MX51_PAD_CSI2_D13__CSI2_D13 364 +MX51_PAD_CSI2_D13__GPIO4_10 365 +MX51_PAD_CSI2_D14__CSI2_D14 366 +MX51_PAD_CSI2_D15__CSI2_D15 367 +MX51_PAD_CSI2_D16__CSI2_D16 368 +MX51_PAD_CSI2_D17__CSI2_D17 369 +MX51_PAD_CSI2_D18__CSI2_D18 370 +MX51_PAD_CSI2_D18__GPIO4_11 371 +MX51_PAD_CSI2_D19__CSI2_D19 372 +MX51_PAD_CSI2_D19__GPIO4_12 373 +MX51_PAD_CSI2_VSYNC__CSI2_VSYNC 374 +MX51_PAD_CSI2_VSYNC__GPIO4_13 375 +MX51_PAD_CSI2_HSYNC__CSI2_HSYNC 376 +MX51_PAD_CSI2_HSYNC__GPIO4_14 377 +MX51_PAD_CSI2_PIXCLK__CSI2_PIXCLK 378 +MX51_PAD_CSI2_PIXCLK__GPIO4_15 379 +MX51_PAD_I2C1_CLK__GPIO4_16 380 +MX51_PAD_I2C1_CLK__I2C1_CLK 381 +MX51_PAD_I2C1_DAT__GPIO4_17 382 +MX51_PAD_I2C1_DAT__I2C1_DAT 383 +MX51_PAD_AUD3_BB_TXD__AUD3_TXD 384 +MX51_PAD_AUD3_BB_TXD__GPIO4_18 385 +MX51_PAD_AUD3_BB_RXD__AUD3_RXD 386 +MX51_PAD_AUD3_BB_RXD__GPIO4_19 387 +MX51_PAD_AUD3_BB_RXD__UART3_RXD 388 +MX51_PAD_AUD3_BB_CK__AUD3_TXC 389 +MX51_PAD_AUD3_BB_CK__GPIO4_20 390 +MX51_PAD_AUD3_BB_FS__AUD3_TXFS 391 +MX51_PAD_AUD3_BB_FS__GPIO4_21 392 +MX51_PAD_AUD3_BB_FS__UART3_TXD 393 +MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI 394 +MX51_PAD_CSPI1_MOSI__GPIO4_22 395 +MX51_PAD_CSPI1_MOSI__I2C1_SDA 396 +MX51_PAD_CSPI1_MISO__AUD4_RXD 397 +MX51_PAD_CSPI1_MISO__ECSPI1_MISO 398 +MX51_PAD_CSPI1_MISO__GPIO4_23 399 +MX51_PAD_CSPI1_SS0__AUD4_TXC 400 +MX51_PAD_CSPI1_SS0__ECSPI1_SS0 401 +MX51_PAD_CSPI1_SS0__GPIO4_24 402 +MX51_PAD_CSPI1_SS1__AUD4_TXD 403 +MX51_PAD_CSPI1_SS1__ECSPI1_SS1 404 +MX51_PAD_CSPI1_SS1__GPIO4_25 405 +MX51_PAD_CSPI1_RDY__AUD4_TXFS 406 +MX51_PAD_CSPI1_RDY__ECSPI1_RDY 407 +MX51_PAD_CSPI1_RDY__GPIO4_26 408 +MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK 409 +MX51_PAD_CSPI1_SCLK__GPIO4_27 410 +MX51_PAD_CSPI1_SCLK__I2C1_SCL 411 +MX51_PAD_UART1_RXD__GPIO4_28 412 +MX51_PAD_UART1_RXD__UART1_RXD 413 +MX51_PAD_UART1_TXD__GPIO4_29 414 +MX51_PAD_UART1_TXD__PWM2_PWMO 415 +MX51_PAD_UART1_TXD__UART1_TXD 416 +MX51_PAD_UART1_RTS__GPIO4_30 417 +MX51_PAD_UART1_RTS__UART1_RTS 418 +MX51_PAD_UART1_CTS__GPIO4_31 419 +MX51_PAD_UART1_CTS__UART1_CTS 420 +MX51_PAD_UART2_RXD__FIRI_TXD 421 +MX51_PAD_UART2_RXD__GPIO1_20 422 +MX51_PAD_UART2_RXD__UART2_RXD 423 +MX51_PAD_UART2_TXD__FIRI_RXD 424 +MX51_PAD_UART2_TXD__GPIO1_21 425 +MX51_PAD_UART2_TXD__UART2_TXD 426 +MX51_PAD_UART3_RXD__CSI1_D0 427 +MX51_PAD_UART3_RXD__GPIO1_22 428 +MX51_PAD_UART3_RXD__UART1_DTR 429 +MX51_PAD_UART3_RXD__UART3_RXD 430 +MX51_PAD_UART3_TXD__CSI1_D1 431 +MX51_PAD_UART3_TXD__GPIO1_23 432 +MX51_PAD_UART3_TXD__UART1_DSR 433 +MX51_PAD_UART3_TXD__UART3_TXD 434 +MX51_PAD_OWIRE_LINE__GPIO1_24 435 +MX51_PAD_OWIRE_LINE__OWIRE_LINE 436 +MX51_PAD_OWIRE_LINE__SPDIF_OUT 437 +MX51_PAD_KEY_ROW0__KEY_ROW0 438 +MX51_PAD_KEY_ROW1__KEY_ROW1 439 +MX51_PAD_KEY_ROW2__KEY_ROW2 440 +MX51_PAD_KEY_ROW3__KEY_ROW3 441 +MX51_PAD_KEY_COL0__KEY_COL0 442 +MX51_PAD_KEY_COL0__PLL1_BYP 443 +MX51_PAD_KEY_COL1__KEY_COL1 444 +MX51_PAD_KEY_COL1__PLL2_BYP 445 +MX51_PAD_KEY_COL2__KEY_COL2 446 +MX51_PAD_KEY_COL2__PLL3_BYP 447 +MX51_PAD_KEY_COL3__KEY_COL3 448 +MX51_PAD_KEY_COL4__I2C2_SCL 449 +MX51_PAD_KEY_COL4__KEY_COL4 450 +MX51_PAD_KEY_COL4__SPDIF_OUT1 451 +MX51_PAD_KEY_COL4__UART1_RI 452 +MX51_PAD_KEY_COL4__UART3_RTS 453 +MX51_PAD_KEY_COL5__I2C2_SDA 454 +MX51_PAD_KEY_COL5__KEY_COL5 455 +MX51_PAD_KEY_COL5__UART1_DCD 456 +MX51_PAD_KEY_COL5__UART3_CTS 457 +MX51_PAD_USBH1_CLK__CSPI_SCLK 458 +MX51_PAD_USBH1_CLK__GPIO1_25 459 +MX51_PAD_USBH1_CLK__I2C2_SCL 460 +MX51_PAD_USBH1_CLK__USBH1_CLK 461 +MX51_PAD_USBH1_DIR__CSPI_MOSI 462 +MX51_PAD_USBH1_DIR__GPIO1_26 463 +MX51_PAD_USBH1_DIR__I2C2_SDA 464 +MX51_PAD_USBH1_DIR__USBH1_DIR 465 +MX51_PAD_USBH1_STP__CSPI_RDY 466 +MX51_PAD_USBH1_STP__GPIO1_27 467 +MX51_PAD_USBH1_STP__UART3_RXD 468 +MX51_PAD_USBH1_STP__USBH1_STP 469 +MX51_PAD_USBH1_NXT__CSPI_MISO 470 +MX51_PAD_USBH1_NXT__GPIO1_28 471 +MX51_PAD_USBH1_NXT__UART3_TXD 472 +MX51_PAD_USBH1_NXT__USBH1_NXT 473 +MX51_PAD_USBH1_DATA0__GPIO1_11 474 +MX51_PAD_USBH1_DATA0__UART2_CTS 475 +MX51_PAD_USBH1_DATA0__USBH1_DATA0 476 +MX51_PAD_USBH1_DATA1__GPIO1_12 477 +MX51_PAD_USBH1_DATA1__UART2_RXD 478 +MX51_PAD_USBH1_DATA1__USBH1_DATA1 479 +MX51_PAD_USBH1_DATA2__GPIO1_13 480 +MX51_PAD_USBH1_DATA2__UART2_TXD 481 +MX51_PAD_USBH1_DATA2__USBH1_DATA2 482 +MX51_PAD_USBH1_DATA3__GPIO1_14 483 +MX51_PAD_USBH1_DATA3__UART2_RTS 484 +MX51_PAD_USBH1_DATA3__USBH1_DATA3 485 +MX51_PAD_USBH1_DATA4__CSPI_SS0 486 +MX51_PAD_USBH1_DATA4__GPIO1_15 487 +MX51_PAD_USBH1_DATA4__USBH1_DATA4 488 +MX51_PAD_USBH1_DATA5__CSPI_SS1 489 +MX51_PAD_USBH1_DATA5__GPIO1_16 490 +MX51_PAD_USBH1_DATA5__USBH1_DATA5 491 +MX51_PAD_USBH1_DATA6__CSPI_SS3 492 +MX51_PAD_USBH1_DATA6__GPIO1_17 493 +MX51_PAD_USBH1_DATA6__USBH1_DATA6 494 +MX51_PAD_USBH1_DATA7__ECSPI1_SS3 495 +MX51_PAD_USBH1_DATA7__ECSPI2_SS3 496 +MX51_PAD_USBH1_DATA7__GPIO1_18 497 +MX51_PAD_USBH1_DATA7__USBH1_DATA7 498 +MX51_PAD_DI1_PIN11__DI1_PIN11 499 +MX51_PAD_DI1_PIN11__ECSPI1_SS2 500 +MX51_PAD_DI1_PIN11__GPIO3_0 501 +MX51_PAD_DI1_PIN12__DI1_PIN12 502 +MX51_PAD_DI1_PIN12__GPIO3_1 503 +MX51_PAD_DI1_PIN13__DI1_PIN13 504 +MX51_PAD_DI1_PIN13__GPIO3_2 505 +MX51_PAD_DI1_D0_CS__DI1_D0_CS 506 +MX51_PAD_DI1_D0_CS__GPIO3_3 507 +MX51_PAD_DI1_D1_CS__DI1_D1_CS 508 +MX51_PAD_DI1_D1_CS__DISP1_PIN14 509 +MX51_PAD_DI1_D1_CS__DISP1_PIN5 510 +MX51_PAD_DI1_D1_CS__GPIO3_4 511 +MX51_PAD_DISPB2_SER_DIN__DISP1_PIN1 512 +MX51_PAD_DISPB2_SER_DIN__DISPB2_SER_DIN 513 +MX51_PAD_DISPB2_SER_DIN__GPIO3_5 514 +MX51_PAD_DISPB2_SER_DIO__DISP1_PIN6 515 +MX51_PAD_DISPB2_SER_DIO__DISPB2_SER_DIO 516 +MX51_PAD_DISPB2_SER_DIO__GPIO3_6 517 +MX51_PAD_DISPB2_SER_CLK__DISP1_PIN17 518 +MX51_PAD_DISPB2_SER_CLK__DISP1_PIN7 519 +MX51_PAD_DISPB2_SER_CLK__DISPB2_SER_CLK 520 +MX51_PAD_DISPB2_SER_CLK__GPIO3_7 521 +MX51_PAD_DISPB2_SER_RS__DISP1_EXT_CLK 522 +MX51_PAD_DISPB2_SER_RS__DISP1_PIN16 523 +MX51_PAD_DISPB2_SER_RS__DISP1_PIN8 524 +MX51_PAD_DISPB2_SER_RS__DISPB2_SER_RS 525 +MX51_PAD_DISPB2_SER_RS__DISPB2_SER_RS 526 +MX51_PAD_DISPB2_SER_RS__GPIO3_8 527 +MX51_PAD_DISP1_DAT0__DISP1_DAT0 528 +MX51_PAD_DISP1_DAT1__DISP1_DAT1 529 +MX51_PAD_DISP1_DAT2__DISP1_DAT2 530 +MX51_PAD_DISP1_DAT3__DISP1_DAT3 531 +MX51_PAD_DISP1_DAT4__DISP1_DAT4 532 +MX51_PAD_DISP1_DAT5__DISP1_DAT5 533 +MX51_PAD_DISP1_DAT6__BOOT_USB_SRC 534 +MX51_PAD_DISP1_DAT6__DISP1_DAT6 535 +MX51_PAD_DISP1_DAT7__BOOT_EEPROM_CFG 536 +MX51_PAD_DISP1_DAT7__DISP1_DAT7 537 +MX51_PAD_DISP1_DAT8__BOOT_SRC0 538 +MX51_PAD_DISP1_DAT8__DISP1_DAT8 539 +MX51_PAD_DISP1_DAT9__BOOT_SRC1 540 +MX51_PAD_DISP1_DAT9__DISP1_DAT9 541 +MX51_PAD_DISP1_DAT10__BOOT_SPARE_SIZE 542 +MX51_PAD_DISP1_DAT10__DISP1_DAT10 543 +MX51_PAD_DISP1_DAT11__BOOT_LPB_FREQ2 544 +MX51_PAD_DISP1_DAT11__DISP1_DAT11 545 +MX51_PAD_DISP1_DAT12__BOOT_MLC_SEL 546 +MX51_PAD_DISP1_DAT12__DISP1_DAT12 547 +MX51_PAD_DISP1_DAT13__BOOT_MEM_CTL0 548 +MX51_PAD_DISP1_DAT13__DISP1_DAT13 549 +MX51_PAD_DISP1_DAT14__BOOT_MEM_CTL1 550 +MX51_PAD_DISP1_DAT14__DISP1_DAT14 551 +MX51_PAD_DISP1_DAT15__BOOT_BUS_WIDTH 552 +MX51_PAD_DISP1_DAT15__DISP1_DAT15 553 +MX51_PAD_DISP1_DAT16__BOOT_PAGE_SIZE0 554 +MX51_PAD_DISP1_DAT16__DISP1_DAT16 555 +MX51_PAD_DISP1_DAT17__BOOT_PAGE_SIZE1 556 +MX51_PAD_DISP1_DAT17__DISP1_DAT17 557 +MX51_PAD_DISP1_DAT18__BOOT_WEIM_MUXED0 558 +MX51_PAD_DISP1_DAT18__DISP1_DAT18 559 +MX51_PAD_DISP1_DAT18__DISP2_PIN11 560 +MX51_PAD_DISP1_DAT18__DISP2_PIN5 561 +MX51_PAD_DISP1_DAT19__BOOT_WEIM_MUXED1 562 +MX51_PAD_DISP1_DAT19__DISP1_DAT19 563 +MX51_PAD_DISP1_DAT19__DISP2_PIN12 564 +MX51_PAD_DISP1_DAT19__DISP2_PIN6 565 +MX51_PAD_DISP1_DAT20__BOOT_MEM_TYPE0 566 +MX51_PAD_DISP1_DAT20__DISP1_DAT20 567 +MX51_PAD_DISP1_DAT20__DISP2_PIN13 568 +MX51_PAD_DISP1_DAT20__DISP2_PIN7 569 +MX51_PAD_DISP1_DAT21__BOOT_MEM_TYPE1 570 +MX51_PAD_DISP1_DAT21__DISP1_DAT21 571 +MX51_PAD_DISP1_DAT21__DISP2_PIN14 572 +MX51_PAD_DISP1_DAT21__DISP2_PIN8 573 +MX51_PAD_DISP1_DAT22__BOOT_LPB_FREQ0 574 +MX51_PAD_DISP1_DAT22__DISP1_DAT22 575 +MX51_PAD_DISP1_DAT22__DISP2_D0_CS 576 +MX51_PAD_DISP1_DAT22__DISP2_DAT16 577 +MX51_PAD_DISP1_DAT23__BOOT_LPB_FREQ1 578 +MX51_PAD_DISP1_DAT23__DISP1_DAT23 579 +MX51_PAD_DISP1_DAT23__DISP2_D1_CS 580 +MX51_PAD_DISP1_DAT23__DISP2_DAT17 581 +MX51_PAD_DISP1_DAT23__DISP2_SER_CS 582 +MX51_PAD_DI1_PIN3__DI1_PIN3 583 +MX51_PAD_DI1_PIN2__DI1_PIN2 584 +MX51_PAD_DI_GP2__DISP1_SER_CLK 585 +MX51_PAD_DI_GP2__DISP2_WAIT 586 +MX51_PAD_DI_GP3__CSI1_DATA_EN 587 +MX51_PAD_DI_GP3__DISP1_SER_DIO 588 +MX51_PAD_DI_GP3__FEC_TX_ER 589 +MX51_PAD_DI2_PIN4__CSI2_DATA_EN 590 +MX51_PAD_DI2_PIN4__DI2_PIN4 591 +MX51_PAD_DI2_PIN4__FEC_CRS 592 +MX51_PAD_DI2_PIN2__DI2_PIN2 593 +MX51_PAD_DI2_PIN2__FEC_MDC 594 +MX51_PAD_DI2_PIN3__DI2_PIN3 595 +MX51_PAD_DI2_PIN3__FEC_MDIO 596 +MX51_PAD_DI2_DISP_CLK__DI2_DISP_CLK 597 +MX51_PAD_DI2_DISP_CLK__FEC_RDATA1 598 +MX51_PAD_DI_GP4__DI2_PIN15 599 +MX51_PAD_DI_GP4__DISP1_SER_DIN 600 +MX51_PAD_DI_GP4__DISP2_PIN1 601 +MX51_PAD_DI_GP4__FEC_RDATA2 602 +MX51_PAD_DISP2_DAT0__DISP2_DAT0 603 +MX51_PAD_DISP2_DAT0__FEC_RDATA3 604 +MX51_PAD_DISP2_DAT0__KEY_COL6 605 +MX51_PAD_DISP2_DAT0__UART3_RXD 606 +MX51_PAD_DISP2_DAT0__USBH3_CLK 607 +MX51_PAD_DISP2_DAT1__DISP2_DAT1 608 +MX51_PAD_DISP2_DAT1__FEC_RX_ER 609 +MX51_PAD_DISP2_DAT1__KEY_COL7 610 +MX51_PAD_DISP2_DAT1__UART3_TXD 611 +MX51_PAD_DISP2_DAT1__USBH3_DIR 612 +MX51_PAD_DISP2_DAT2__DISP2_DAT2 613 +MX51_PAD_DISP2_DAT3__DISP2_DAT3 614 +MX51_PAD_DISP2_DAT4__DISP2_DAT4 615 +MX51_PAD_DISP2_DAT5__DISP2_DAT5 616 +MX51_PAD_DISP2_DAT6__DISP2_DAT6 617 +MX51_PAD_DISP2_DAT6__FEC_TDATA1 618 +MX51_PAD_DISP2_DAT6__GPIO1_19 619 +MX51_PAD_DISP2_DAT6__KEY_ROW4 620 +MX51_PAD_DISP2_DAT6__USBH3_STP 621 +MX51_PAD_DISP2_DAT7__DISP2_DAT7 622 +MX51_PAD_DISP2_DAT7__FEC_TDATA2 623 +MX51_PAD_DISP2_DAT7__GPIO1_29 624 +MX51_PAD_DISP2_DAT7__KEY_ROW5 625 +MX51_PAD_DISP2_DAT7__USBH3_NXT 626 +MX51_PAD_DISP2_DAT8__DISP2_DAT8 627 +MX51_PAD_DISP2_DAT8__FEC_TDATA3 628 +MX51_PAD_DISP2_DAT8__GPIO1_30 629 +MX51_PAD_DISP2_DAT8__KEY_ROW6 630 +MX51_PAD_DISP2_DAT8__USBH3_DATA0 631 +MX51_PAD_DISP2_DAT9__AUD6_RXC 632 +MX51_PAD_DISP2_DAT9__DISP2_DAT9 633 +MX51_PAD_DISP2_DAT9__FEC_TX_EN 634 +MX51_PAD_DISP2_DAT9__GPIO1_31 635 +MX51_PAD_DISP2_DAT9__USBH3_DATA1 636 +MX51_PAD_DISP2_DAT10__DISP2_DAT10 637 +MX51_PAD_DISP2_DAT10__DISP2_SER_CS 638 +MX51_PAD_DISP2_DAT10__FEC_COL 639 +MX51_PAD_DISP2_DAT10__KEY_ROW7 640 +MX51_PAD_DISP2_DAT10__USBH3_DATA2 641 +MX51_PAD_DISP2_DAT11__AUD6_TXD 642 +MX51_PAD_DISP2_DAT11__DISP2_DAT11 643 +MX51_PAD_DISP2_DAT11__FEC_RX_CLK 644 +MX51_PAD_DISP2_DAT11__GPIO1_10 645 +MX51_PAD_DISP2_DAT11__USBH3_DATA3 646 +MX51_PAD_DISP2_DAT12__AUD6_RXD 647 +MX51_PAD_DISP2_DAT12__DISP2_DAT12 648 +MX51_PAD_DISP2_DAT12__FEC_RX_DV 649 +MX51_PAD_DISP2_DAT12__USBH3_DATA4 650 +MX51_PAD_DISP2_DAT13__AUD6_TXC 651 +MX51_PAD_DISP2_DAT13__DISP2_DAT13 652 +MX51_PAD_DISP2_DAT13__FEC_TX_CLK 653 +MX51_PAD_DISP2_DAT13__USBH3_DATA5 654 +MX51_PAD_DISP2_DAT14__AUD6_TXFS 655 +MX51_PAD_DISP2_DAT14__DISP2_DAT14 656 +MX51_PAD_DISP2_DAT14__FEC_RDATA0 657 +MX51_PAD_DISP2_DAT14__USBH3_DATA6 658 +MX51_PAD_DISP2_DAT15__AUD6_RXFS 659 +MX51_PAD_DISP2_DAT15__DISP1_SER_CS 660 +MX51_PAD_DISP2_DAT15__DISP2_DAT15 661 +MX51_PAD_DISP2_DAT15__FEC_TDATA0 662 +MX51_PAD_DISP2_DAT15__USBH3_DATA7 663 +MX51_PAD_SD1_CMD__AUD5_RXFS 664 +MX51_PAD_SD1_CMD__CSPI_MOSI 665 +MX51_PAD_SD1_CMD__SD1_CMD 666 +MX51_PAD_SD1_CLK__AUD5_RXC 667 +MX51_PAD_SD1_CLK__CSPI_SCLK 668 +MX51_PAD_SD1_CLK__SD1_CLK 669 +MX51_PAD_SD1_DATA0__AUD5_TXD 670 +MX51_PAD_SD1_DATA0__CSPI_MISO 671 +MX51_PAD_SD1_DATA0__SD1_DATA0 672 +MX51_PAD_EIM_DA0__EIM_DA0 673 +MX51_PAD_EIM_DA1__EIM_DA1 674 +MX51_PAD_EIM_DA2__EIM_DA2 675 +MX51_PAD_EIM_DA3__EIM_DA3 676 +MX51_PAD_SD1_DATA1__AUD5_RXD 677 +MX51_PAD_SD1_DATA1__SD1_DATA1 678 +MX51_PAD_EIM_DA4__EIM_DA4 679 +MX51_PAD_EIM_DA5__EIM_DA5 680 +MX51_PAD_EIM_DA6__EIM_DA6 681 +MX51_PAD_EIM_DA7__EIM_DA7 682 +MX51_PAD_SD1_DATA2__AUD5_TXC 683 +MX51_PAD_SD1_DATA2__SD1_DATA2 684 +MX51_PAD_EIM_DA10__EIM_DA10 685 +MX51_PAD_EIM_DA11__EIM_DA11 686 +MX51_PAD_EIM_DA8__EIM_DA8 687 +MX51_PAD_EIM_DA9__EIM_DA9 688 +MX51_PAD_SD1_DATA3__AUD5_TXFS 689 +MX51_PAD_SD1_DATA3__CSPI_SS1 690 +MX51_PAD_SD1_DATA3__SD1_DATA3 691 +MX51_PAD_GPIO1_0__CSPI_SS2 692 +MX51_PAD_GPIO1_0__GPIO1_0 693 +MX51_PAD_GPIO1_0__SD1_CD 694 +MX51_PAD_GPIO1_1__CSPI_MISO 695 +MX51_PAD_GPIO1_1__GPIO1_1 696 +MX51_PAD_GPIO1_1__SD1_WP 697 +MX51_PAD_EIM_DA12__EIM_DA12 698 +MX51_PAD_EIM_DA13__EIM_DA13 699 +MX51_PAD_EIM_DA14__EIM_DA14 700 +MX51_PAD_EIM_DA15__EIM_DA15 701 +MX51_PAD_SD2_CMD__CSPI_MOSI 702 +MX51_PAD_SD2_CMD__I2C1_SCL 703 +MX51_PAD_SD2_CMD__SD2_CMD 704 +MX51_PAD_SD2_CLK__CSPI_SCLK 705 +MX51_PAD_SD2_CLK__I2C1_SDA 706 +MX51_PAD_SD2_CLK__SD2_CLK 707 +MX51_PAD_SD2_DATA0__CSPI_MISO 708 +MX51_PAD_SD2_DATA0__SD1_DAT4 709 +MX51_PAD_SD2_DATA0__SD2_DATA0 710 +MX51_PAD_SD2_DATA1__SD1_DAT5 711 +MX51_PAD_SD2_DATA1__SD2_DATA1 712 +MX51_PAD_SD2_DATA1__USBH3_H2_DP 713 +MX51_PAD_SD2_DATA2__SD1_DAT6 714 +MX51_PAD_SD2_DATA2__SD2_DATA2 715 +MX51_PAD_SD2_DATA2__USBH3_H2_DM 716 +MX51_PAD_SD2_DATA3__CSPI_SS2 717 +MX51_PAD_SD2_DATA3__SD1_DAT7 718 +MX51_PAD_SD2_DATA3__SD2_DATA3 719 +MX51_PAD_GPIO1_2__CCM_OUT_2 720 +MX51_PAD_GPIO1_2__GPIO1_2 721 +MX51_PAD_GPIO1_2__I2C2_SCL 722 +MX51_PAD_GPIO1_2__PLL1_BYP 723 +MX51_PAD_GPIO1_2__PWM1_PWMO 724 +MX51_PAD_GPIO1_3__GPIO1_3 725 +MX51_PAD_GPIO1_3__I2C2_SDA 726 +MX51_PAD_GPIO1_3__PLL2_BYP 727 +MX51_PAD_GPIO1_3__PWM2_PWMO 728 +MX51_PAD_PMIC_INT_REQ__PMIC_INT_REQ 729 +MX51_PAD_PMIC_INT_REQ__PMIC_PMU_IRQ_B 730 +MX51_PAD_GPIO1_4__DISP2_EXT_CLK 731 +MX51_PAD_GPIO1_4__EIM_RDY 732 +MX51_PAD_GPIO1_4__GPIO1_4 733 +MX51_PAD_GPIO1_4__WDOG1_WDOG_B 734 +MX51_PAD_GPIO1_5__CSI2_MCLK 735 +MX51_PAD_GPIO1_5__DISP2_PIN16 736 +MX51_PAD_GPIO1_5__GPIO1_5 737 +MX51_PAD_GPIO1_5__WDOG2_WDOG_B 738 +MX51_PAD_GPIO1_6__DISP2_PIN17 739 +MX51_PAD_GPIO1_6__GPIO1_6 740 +MX51_PAD_GPIO1_6__REF_EN_B 741 +MX51_PAD_GPIO1_7__CCM_OUT_0 742 +MX51_PAD_GPIO1_7__GPIO1_7 743 +MX51_PAD_GPIO1_7__SD2_WP 744 +MX51_PAD_GPIO1_7__SPDIF_OUT1 745 +MX51_PAD_GPIO1_8__CSI2_DATA_EN 746 +MX51_PAD_GPIO1_8__GPIO1_8 747 +MX51_PAD_GPIO1_8__SD2_CD 748 +MX51_PAD_GPIO1_8__USBH3_PWR 749 +MX51_PAD_GPIO1_9__CCM_OUT_1 750 +MX51_PAD_GPIO1_9__DISP2_D1_CS 751 +MX51_PAD_GPIO1_9__DISP2_SER_CS 752 +MX51_PAD_GPIO1_9__GPIO1_9 753 +MX51_PAD_GPIO1_9__SD2_LCTL 754 +MX51_PAD_GPIO1_9__USBH3_OC 755 diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx53-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/fsl,imx53-pinctrl.txt new file mode 100644 index 000000000000..ca85ca432ef0 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx53-pinctrl.txt @@ -0,0 +1,1202 @@ +* Freescale IMX53 IOMUX Controller + +Please refer to fsl,imx-pinctrl.txt in this directory for common binding part +and usage. + +Required properties: +- compatible: "fsl,imx53-iomuxc" +- fsl,pins: two integers array, represents a group of pins mux and config + setting. The format is fsl,pins = <PIN_FUNC_ID CONFIG>, PIN_FUNC_ID is a + pin working on a specific function, CONFIG is the pad setting value like + pull-up for this pin. Please refer to imx53 datasheet for the valid pad + config settings. + +CONFIG bits definition: +PAD_CTL_HVE (1 << 13) +PAD_CTL_HYS (1 << 8) +PAD_CTL_PKE (1 << 7) +PAD_CTL_PUE (1 << 6) +PAD_CTL_PUS_100K_DOWN (0 << 4) +PAD_CTL_PUS_47K_UP (1 << 4) +PAD_CTL_PUS_100K_UP (2 << 4) +PAD_CTL_PUS_22K_UP (3 << 4) +PAD_CTL_ODE (1 << 3) +PAD_CTL_DSE_LOW (0 << 1) +PAD_CTL_DSE_MED (1 << 1) +PAD_CTL_DSE_HIGH (2 << 1) +PAD_CTL_DSE_MAX (3 << 1) +PAD_CTL_SRE_FAST (1 << 0) +PAD_CTL_SRE_SLOW (0 << 0) + +See below for available PIN_FUNC_ID for imx53: +MX53_PAD_GPIO_19__KPP_COL_5 0 +MX53_PAD_GPIO_19__GPIO4_5 1 +MX53_PAD_GPIO_19__CCM_CLKO 2 +MX53_PAD_GPIO_19__SPDIF_OUT1 3 +MX53_PAD_GPIO_19__RTC_CE_RTC_EXT_TRIG2 4 +MX53_PAD_GPIO_19__ECSPI1_RDY 5 +MX53_PAD_GPIO_19__FEC_TDATA_3 6 +MX53_PAD_GPIO_19__SRC_INT_BOOT 7 +MX53_PAD_KEY_COL0__KPP_COL_0 8 +MX53_PAD_KEY_COL0__GPIO4_6 9 +MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC 10 +MX53_PAD_KEY_COL0__UART4_TXD_MUX 11 +MX53_PAD_KEY_COL0__ECSPI1_SCLK 12 +MX53_PAD_KEY_COL0__FEC_RDATA_3 13 +MX53_PAD_KEY_COL0__SRC_ANY_PU_RST 14 +MX53_PAD_KEY_ROW0__KPP_ROW_0 15 +MX53_PAD_KEY_ROW0__GPIO4_7 16 +MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD 17 +MX53_PAD_KEY_ROW0__UART4_RXD_MUX 18 +MX53_PAD_KEY_ROW0__ECSPI1_MOSI 19 +MX53_PAD_KEY_ROW0__FEC_TX_ER 20 +MX53_PAD_KEY_COL1__KPP_COL_1 21 +MX53_PAD_KEY_COL1__GPIO4_8 22 +MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS 23 +MX53_PAD_KEY_COL1__UART5_TXD_MUX 24 +MX53_PAD_KEY_COL1__ECSPI1_MISO 25 +MX53_PAD_KEY_COL1__FEC_RX_CLK 26 +MX53_PAD_KEY_COL1__USBPHY1_TXREADY 27 +MX53_PAD_KEY_ROW1__KPP_ROW_1 28 +MX53_PAD_KEY_ROW1__GPIO4_9 29 +MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD 30 +MX53_PAD_KEY_ROW1__UART5_RXD_MUX 31 +MX53_PAD_KEY_ROW1__ECSPI1_SS0 32 +MX53_PAD_KEY_ROW1__FEC_COL 33 +MX53_PAD_KEY_ROW1__USBPHY1_RXVALID 34 +MX53_PAD_KEY_COL2__KPP_COL_2 35 +MX53_PAD_KEY_COL2__GPIO4_10 36 +MX53_PAD_KEY_COL2__CAN1_TXCAN 37 +MX53_PAD_KEY_COL2__FEC_MDIO 38 +MX53_PAD_KEY_COL2__ECSPI1_SS1 39 +MX53_PAD_KEY_COL2__FEC_RDATA_2 40 +MX53_PAD_KEY_COL2__USBPHY1_RXACTIVE 41 +MX53_PAD_KEY_ROW2__KPP_ROW_2 42 +MX53_PAD_KEY_ROW2__GPIO4_11 43 +MX53_PAD_KEY_ROW2__CAN1_RXCAN 44 +MX53_PAD_KEY_ROW2__FEC_MDC 45 +MX53_PAD_KEY_ROW2__ECSPI1_SS2 46 +MX53_PAD_KEY_ROW2__FEC_TDATA_2 47 +MX53_PAD_KEY_ROW2__USBPHY1_RXERROR 48 +MX53_PAD_KEY_COL3__KPP_COL_3 49 +MX53_PAD_KEY_COL3__GPIO4_12 50 +MX53_PAD_KEY_COL3__USBOH3_H2_DP 51 +MX53_PAD_KEY_COL3__SPDIF_IN1 52 +MX53_PAD_KEY_COL3__I2C2_SCL 53 +MX53_PAD_KEY_COL3__ECSPI1_SS3 54 +MX53_PAD_KEY_COL3__FEC_CRS 55 +MX53_PAD_KEY_COL3__USBPHY1_SIECLOCK 56 +MX53_PAD_KEY_ROW3__KPP_ROW_3 57 +MX53_PAD_KEY_ROW3__GPIO4_13 58 +MX53_PAD_KEY_ROW3__USBOH3_H2_DM 59 +MX53_PAD_KEY_ROW3__CCM_ASRC_EXT_CLK 60 +MX53_PAD_KEY_ROW3__I2C2_SDA 61 +MX53_PAD_KEY_ROW3__OSC32K_32K_OUT 62 +MX53_PAD_KEY_ROW3__CCM_PLL4_BYP 63 +MX53_PAD_KEY_ROW3__USBPHY1_LINESTATE_0 64 +MX53_PAD_KEY_COL4__KPP_COL_4 65 +MX53_PAD_KEY_COL4__GPIO4_14 66 +MX53_PAD_KEY_COL4__CAN2_TXCAN 67 +MX53_PAD_KEY_COL4__IPU_SISG_4 68 +MX53_PAD_KEY_COL4__UART5_RTS 69 +MX53_PAD_KEY_COL4__USBOH3_USBOTG_OC 70 +MX53_PAD_KEY_COL4__USBPHY1_LINESTATE_1 71 +MX53_PAD_KEY_ROW4__KPP_ROW_4 72 +MX53_PAD_KEY_ROW4__GPIO4_15 73 +MX53_PAD_KEY_ROW4__CAN2_RXCAN 74 +MX53_PAD_KEY_ROW4__IPU_SISG_5 75 +MX53_PAD_KEY_ROW4__UART5_CTS 76 +MX53_PAD_KEY_ROW4__USBOH3_USBOTG_PWR 77 +MX53_PAD_KEY_ROW4__USBPHY1_VBUSVALID 78 +MX53_PAD_DI0_DISP_CLK__IPU_DI0_DISP_CLK 79 +MX53_PAD_DI0_DISP_CLK__GPIO4_16 80 +MX53_PAD_DI0_DISP_CLK__USBOH3_USBH2_DIR 81 +MX53_PAD_DI0_DISP_CLK__SDMA_DEBUG_CORE_STATE_0 82 +MX53_PAD_DI0_DISP_CLK__EMI_EMI_DEBUG_0 83 +MX53_PAD_DI0_DISP_CLK__USBPHY1_AVALID 84 +MX53_PAD_DI0_PIN15__IPU_DI0_PIN15 85 +MX53_PAD_DI0_PIN15__GPIO4_17 86 +MX53_PAD_DI0_PIN15__AUDMUX_AUD6_TXC 87 +MX53_PAD_DI0_PIN15__SDMA_DEBUG_CORE_STATE_1 88 +MX53_PAD_DI0_PIN15__EMI_EMI_DEBUG_1 89 +MX53_PAD_DI0_PIN15__USBPHY1_BVALID 90 +MX53_PAD_DI0_PIN2__IPU_DI0_PIN2 91 +MX53_PAD_DI0_PIN2__GPIO4_18 92 +MX53_PAD_DI0_PIN2__AUDMUX_AUD6_TXD 93 +MX53_PAD_DI0_PIN2__SDMA_DEBUG_CORE_STATE_2 94 +MX53_PAD_DI0_PIN2__EMI_EMI_DEBUG_2 95 +MX53_PAD_DI0_PIN2__USBPHY1_ENDSESSION 96 +MX53_PAD_DI0_PIN3__IPU_DI0_PIN3 97 +MX53_PAD_DI0_PIN3__GPIO4_19 98 +MX53_PAD_DI0_PIN3__AUDMUX_AUD6_TXFS 99 +MX53_PAD_DI0_PIN3__SDMA_DEBUG_CORE_STATE_3 100 +MX53_PAD_DI0_PIN3__EMI_EMI_DEBUG_3 101 +MX53_PAD_DI0_PIN3__USBPHY1_IDDIG 102 +MX53_PAD_DI0_PIN4__IPU_DI0_PIN4 103 +MX53_PAD_DI0_PIN4__GPIO4_20 104 +MX53_PAD_DI0_PIN4__AUDMUX_AUD6_RXD 105 +MX53_PAD_DI0_PIN4__ESDHC1_WP 106 +MX53_PAD_DI0_PIN4__SDMA_DEBUG_YIELD 107 +MX53_PAD_DI0_PIN4__EMI_EMI_DEBUG_4 108 +MX53_PAD_DI0_PIN4__USBPHY1_HOSTDISCONNECT 109 +MX53_PAD_DISP0_DAT0__IPU_DISP0_DAT_0 110 +MX53_PAD_DISP0_DAT0__GPIO4_21 111 +MX53_PAD_DISP0_DAT0__CSPI_SCLK 112 +MX53_PAD_DISP0_DAT0__USBOH3_USBH2_DATA_0 113 +MX53_PAD_DISP0_DAT0__SDMA_DEBUG_CORE_RUN 114 +MX53_PAD_DISP0_DAT0__EMI_EMI_DEBUG_5 115 +MX53_PAD_DISP0_DAT0__USBPHY2_TXREADY 116 +MX53_PAD_DISP0_DAT1__IPU_DISP0_DAT_1 117 +MX53_PAD_DISP0_DAT1__GPIO4_22 118 +MX53_PAD_DISP0_DAT1__CSPI_MOSI 119 +MX53_PAD_DISP0_DAT1__USBOH3_USBH2_DATA_1 120 +MX53_PAD_DISP0_DAT1__SDMA_DEBUG_EVENT_CHANNEL_SEL 121 +MX53_PAD_DISP0_DAT1__EMI_EMI_DEBUG_6 122 +MX53_PAD_DISP0_DAT1__USBPHY2_RXVALID 123 +MX53_PAD_DISP0_DAT2__IPU_DISP0_DAT_2 124 +MX53_PAD_DISP0_DAT2__GPIO4_23 125 +MX53_PAD_DISP0_DAT2__CSPI_MISO 126 +MX53_PAD_DISP0_DAT2__USBOH3_USBH2_DATA_2 127 +MX53_PAD_DISP0_DAT2__SDMA_DEBUG_MODE 128 +MX53_PAD_DISP0_DAT2__EMI_EMI_DEBUG_7 129 +MX53_PAD_DISP0_DAT2__USBPHY2_RXACTIVE 130 +MX53_PAD_DISP0_DAT3__IPU_DISP0_DAT_3 131 +MX53_PAD_DISP0_DAT3__GPIO4_24 132 +MX53_PAD_DISP0_DAT3__CSPI_SS0 133 +MX53_PAD_DISP0_DAT3__USBOH3_USBH2_DATA_3 134 +MX53_PAD_DISP0_DAT3__SDMA_DEBUG_BUS_ERROR 135 +MX53_PAD_DISP0_DAT3__EMI_EMI_DEBUG_8 136 +MX53_PAD_DISP0_DAT3__USBPHY2_RXERROR 137 +MX53_PAD_DISP0_DAT4__IPU_DISP0_DAT_4 138 +MX53_PAD_DISP0_DAT4__GPIO4_25 139 +MX53_PAD_DISP0_DAT4__CSPI_SS1 140 +MX53_PAD_DISP0_DAT4__USBOH3_USBH2_DATA_4 141 +MX53_PAD_DISP0_DAT4__SDMA_DEBUG_BUS_RWB 142 +MX53_PAD_DISP0_DAT4__EMI_EMI_DEBUG_9 143 +MX53_PAD_DISP0_DAT4__USBPHY2_SIECLOCK 144 +MX53_PAD_DISP0_DAT5__IPU_DISP0_DAT_5 145 +MX53_PAD_DISP0_DAT5__GPIO4_26 146 +MX53_PAD_DISP0_DAT5__CSPI_SS2 147 +MX53_PAD_DISP0_DAT5__USBOH3_USBH2_DATA_5 148 +MX53_PAD_DISP0_DAT5__SDMA_DEBUG_MATCHED_DMBUS 149 +MX53_PAD_DISP0_DAT5__EMI_EMI_DEBUG_10 150 +MX53_PAD_DISP0_DAT5__USBPHY2_LINESTATE_0 151 +MX53_PAD_DISP0_DAT6__IPU_DISP0_DAT_6 152 +MX53_PAD_DISP0_DAT6__GPIO4_27 153 +MX53_PAD_DISP0_DAT6__CSPI_SS3 154 +MX53_PAD_DISP0_DAT6__USBOH3_USBH2_DATA_6 155 +MX53_PAD_DISP0_DAT6__SDMA_DEBUG_RTBUFFER_WRITE 156 +MX53_PAD_DISP0_DAT6__EMI_EMI_DEBUG_11 157 +MX53_PAD_DISP0_DAT6__USBPHY2_LINESTATE_1 158 +MX53_PAD_DISP0_DAT7__IPU_DISP0_DAT_7 159 +MX53_PAD_DISP0_DAT7__GPIO4_28 160 +MX53_PAD_DISP0_DAT7__CSPI_RDY 161 +MX53_PAD_DISP0_DAT7__USBOH3_USBH2_DATA_7 162 +MX53_PAD_DISP0_DAT7__SDMA_DEBUG_EVENT_CHANNEL_0 163 +MX53_PAD_DISP0_DAT7__EMI_EMI_DEBUG_12 164 +MX53_PAD_DISP0_DAT7__USBPHY2_VBUSVALID 165 +MX53_PAD_DISP0_DAT8__IPU_DISP0_DAT_8 166 +MX53_PAD_DISP0_DAT8__GPIO4_29 167 +MX53_PAD_DISP0_DAT8__PWM1_PWMO 168 +MX53_PAD_DISP0_DAT8__WDOG1_WDOG_B 169 +MX53_PAD_DISP0_DAT8__SDMA_DEBUG_EVENT_CHANNEL_1 170 +MX53_PAD_DISP0_DAT8__EMI_EMI_DEBUG_13 171 +MX53_PAD_DISP0_DAT8__USBPHY2_AVALID 172 +MX53_PAD_DISP0_DAT9__IPU_DISP0_DAT_9 173 +MX53_PAD_DISP0_DAT9__GPIO4_30 174 +MX53_PAD_DISP0_DAT9__PWM2_PWMO 175 +MX53_PAD_DISP0_DAT9__WDOG2_WDOG_B 176 +MX53_PAD_DISP0_DAT9__SDMA_DEBUG_EVENT_CHANNEL_2 177 +MX53_PAD_DISP0_DAT9__EMI_EMI_DEBUG_14 178 +MX53_PAD_DISP0_DAT9__USBPHY2_VSTATUS_0 179 +MX53_PAD_DISP0_DAT10__IPU_DISP0_DAT_10 180 +MX53_PAD_DISP0_DAT10__GPIO4_31 181 +MX53_PAD_DISP0_DAT10__USBOH3_USBH2_STP 182 +MX53_PAD_DISP0_DAT10__SDMA_DEBUG_EVENT_CHANNEL_3 183 +MX53_PAD_DISP0_DAT10__EMI_EMI_DEBUG_15 184 +MX53_PAD_DISP0_DAT10__USBPHY2_VSTATUS_1 185 +MX53_PAD_DISP0_DAT11__IPU_DISP0_DAT_11 186 +MX53_PAD_DISP0_DAT11__GPIO5_5 187 +MX53_PAD_DISP0_DAT11__USBOH3_USBH2_NXT 188 +MX53_PAD_DISP0_DAT11__SDMA_DEBUG_EVENT_CHANNEL_4 189 +MX53_PAD_DISP0_DAT11__EMI_EMI_DEBUG_16 190 +MX53_PAD_DISP0_DAT11__USBPHY2_VSTATUS_2 191 +MX53_PAD_DISP0_DAT12__IPU_DISP0_DAT_12 192 +MX53_PAD_DISP0_DAT12__GPIO5_6 193 +MX53_PAD_DISP0_DAT12__USBOH3_USBH2_CLK 194 +MX53_PAD_DISP0_DAT12__SDMA_DEBUG_EVENT_CHANNEL_5 195 +MX53_PAD_DISP0_DAT12__EMI_EMI_DEBUG_17 196 +MX53_PAD_DISP0_DAT12__USBPHY2_VSTATUS_3 197 +MX53_PAD_DISP0_DAT13__IPU_DISP0_DAT_13 198 +MX53_PAD_DISP0_DAT13__GPIO5_7 199 +MX53_PAD_DISP0_DAT13__AUDMUX_AUD5_RXFS 200 +MX53_PAD_DISP0_DAT13__SDMA_DEBUG_EVT_CHN_LINES_0 201 +MX53_PAD_DISP0_DAT13__EMI_EMI_DEBUG_18 202 +MX53_PAD_DISP0_DAT13__USBPHY2_VSTATUS_4 203 +MX53_PAD_DISP0_DAT14__IPU_DISP0_DAT_14 204 +MX53_PAD_DISP0_DAT14__GPIO5_8 205 +MX53_PAD_DISP0_DAT14__AUDMUX_AUD5_RXC 206 +MX53_PAD_DISP0_DAT14__SDMA_DEBUG_EVT_CHN_LINES_1 207 +MX53_PAD_DISP0_DAT14__EMI_EMI_DEBUG_19 208 +MX53_PAD_DISP0_DAT14__USBPHY2_VSTATUS_5 209 +MX53_PAD_DISP0_DAT15__IPU_DISP0_DAT_15 210 +MX53_PAD_DISP0_DAT15__GPIO5_9 211 +MX53_PAD_DISP0_DAT15__ECSPI1_SS1 212 +MX53_PAD_DISP0_DAT15__ECSPI2_SS1 213 +MX53_PAD_DISP0_DAT15__SDMA_DEBUG_EVT_CHN_LINES_2 214 +MX53_PAD_DISP0_DAT15__EMI_EMI_DEBUG_20 215 +MX53_PAD_DISP0_DAT15__USBPHY2_VSTATUS_6 216 +MX53_PAD_DISP0_DAT16__IPU_DISP0_DAT_16 217 +MX53_PAD_DISP0_DAT16__GPIO5_10 218 +MX53_PAD_DISP0_DAT16__ECSPI2_MOSI 219 +MX53_PAD_DISP0_DAT16__AUDMUX_AUD5_TXC 220 +MX53_PAD_DISP0_DAT16__SDMA_EXT_EVENT_0 221 +MX53_PAD_DISP0_DAT16__SDMA_DEBUG_EVT_CHN_LINES_3 222 +MX53_PAD_DISP0_DAT16__EMI_EMI_DEBUG_21 223 +MX53_PAD_DISP0_DAT16__USBPHY2_VSTATUS_7 224 +MX53_PAD_DISP0_DAT17__IPU_DISP0_DAT_17 225 +MX53_PAD_DISP0_DAT17__GPIO5_11 226 +MX53_PAD_DISP0_DAT17__ECSPI2_MISO 227 +MX53_PAD_DISP0_DAT17__AUDMUX_AUD5_TXD 228 +MX53_PAD_DISP0_DAT17__SDMA_EXT_EVENT_1 229 +MX53_PAD_DISP0_DAT17__SDMA_DEBUG_EVT_CHN_LINES_4 230 +MX53_PAD_DISP0_DAT17__EMI_EMI_DEBUG_22 231 +MX53_PAD_DISP0_DAT18__IPU_DISP0_DAT_18 232 +MX53_PAD_DISP0_DAT18__GPIO5_12 233 +MX53_PAD_DISP0_DAT18__ECSPI2_SS0 234 +MX53_PAD_DISP0_DAT18__AUDMUX_AUD5_TXFS 235 +MX53_PAD_DISP0_DAT18__AUDMUX_AUD4_RXFS 236 +MX53_PAD_DISP0_DAT18__SDMA_DEBUG_EVT_CHN_LINES_5 237 +MX53_PAD_DISP0_DAT18__EMI_EMI_DEBUG_23 238 +MX53_PAD_DISP0_DAT18__EMI_WEIM_CS_2 239 +MX53_PAD_DISP0_DAT19__IPU_DISP0_DAT_19 240 +MX53_PAD_DISP0_DAT19__GPIO5_13 241 +MX53_PAD_DISP0_DAT19__ECSPI2_SCLK 242 +MX53_PAD_DISP0_DAT19__AUDMUX_AUD5_RXD 243 +MX53_PAD_DISP0_DAT19__AUDMUX_AUD4_RXC 244 +MX53_PAD_DISP0_DAT19__SDMA_DEBUG_EVT_CHN_LINES_6 245 +MX53_PAD_DISP0_DAT19__EMI_EMI_DEBUG_24 246 +MX53_PAD_DISP0_DAT19__EMI_WEIM_CS_3 247 +MX53_PAD_DISP0_DAT20__IPU_DISP0_DAT_20 248 +MX53_PAD_DISP0_DAT20__GPIO5_14 249 +MX53_PAD_DISP0_DAT20__ECSPI1_SCLK 250 +MX53_PAD_DISP0_DAT20__AUDMUX_AUD4_TXC 251 +MX53_PAD_DISP0_DAT20__SDMA_DEBUG_EVT_CHN_LINES_7 252 +MX53_PAD_DISP0_DAT20__EMI_EMI_DEBUG_25 253 +MX53_PAD_DISP0_DAT20__SATA_PHY_TDI 254 +MX53_PAD_DISP0_DAT21__IPU_DISP0_DAT_21 255 +MX53_PAD_DISP0_DAT21__GPIO5_15 256 +MX53_PAD_DISP0_DAT21__ECSPI1_MOSI 257 +MX53_PAD_DISP0_DAT21__AUDMUX_AUD4_TXD 258 +MX53_PAD_DISP0_DAT21__SDMA_DEBUG_BUS_DEVICE_0 259 +MX53_PAD_DISP0_DAT21__EMI_EMI_DEBUG_26 260 +MX53_PAD_DISP0_DAT21__SATA_PHY_TDO 261 +MX53_PAD_DISP0_DAT22__IPU_DISP0_DAT_22 262 +MX53_PAD_DISP0_DAT22__GPIO5_16 263 +MX53_PAD_DISP0_DAT22__ECSPI1_MISO 264 +MX53_PAD_DISP0_DAT22__AUDMUX_AUD4_TXFS 265 +MX53_PAD_DISP0_DAT22__SDMA_DEBUG_BUS_DEVICE_1 266 +MX53_PAD_DISP0_DAT22__EMI_EMI_DEBUG_27 267 +MX53_PAD_DISP0_DAT22__SATA_PHY_TCK 268 +MX53_PAD_DISP0_DAT23__IPU_DISP0_DAT_23 269 +MX53_PAD_DISP0_DAT23__GPIO5_17 270 +MX53_PAD_DISP0_DAT23__ECSPI1_SS0 271 +MX53_PAD_DISP0_DAT23__AUDMUX_AUD4_RXD 272 +MX53_PAD_DISP0_DAT23__SDMA_DEBUG_BUS_DEVICE_2 273 +MX53_PAD_DISP0_DAT23__EMI_EMI_DEBUG_28 274 +MX53_PAD_DISP0_DAT23__SATA_PHY_TMS 275 +MX53_PAD_CSI0_PIXCLK__IPU_CSI0_PIXCLK 276 +MX53_PAD_CSI0_PIXCLK__GPIO5_18 277 +MX53_PAD_CSI0_PIXCLK__SDMA_DEBUG_PC_0 278 +MX53_PAD_CSI0_PIXCLK__EMI_EMI_DEBUG_29 279 +MX53_PAD_CSI0_MCLK__IPU_CSI0_HSYNC 280 +MX53_PAD_CSI0_MCLK__GPIO5_19 281 +MX53_PAD_CSI0_MCLK__CCM_CSI0_MCLK 282 +MX53_PAD_CSI0_MCLK__SDMA_DEBUG_PC_1 283 +MX53_PAD_CSI0_MCLK__EMI_EMI_DEBUG_30 284 +MX53_PAD_CSI0_MCLK__TPIU_TRCTL 285 +MX53_PAD_CSI0_DATA_EN__IPU_CSI0_DATA_EN 286 +MX53_PAD_CSI0_DATA_EN__GPIO5_20 287 +MX53_PAD_CSI0_DATA_EN__SDMA_DEBUG_PC_2 288 +MX53_PAD_CSI0_DATA_EN__EMI_EMI_DEBUG_31 289 +MX53_PAD_CSI0_DATA_EN__TPIU_TRCLK 290 +MX53_PAD_CSI0_VSYNC__IPU_CSI0_VSYNC 291 +MX53_PAD_CSI0_VSYNC__GPIO5_21 292 +MX53_PAD_CSI0_VSYNC__SDMA_DEBUG_PC_3 293 +MX53_PAD_CSI0_VSYNC__EMI_EMI_DEBUG_32 294 +MX53_PAD_CSI0_VSYNC__TPIU_TRACE_0 295 +MX53_PAD_CSI0_DAT4__IPU_CSI0_D_4 296 +MX53_PAD_CSI0_DAT4__GPIO5_22 297 +MX53_PAD_CSI0_DAT4__KPP_COL_5 298 +MX53_PAD_CSI0_DAT4__ECSPI1_SCLK 299 +MX53_PAD_CSI0_DAT4__USBOH3_USBH3_STP 300 +MX53_PAD_CSI0_DAT4__AUDMUX_AUD3_TXC 301 +MX53_PAD_CSI0_DAT4__EMI_EMI_DEBUG_33 302 +MX53_PAD_CSI0_DAT4__TPIU_TRACE_1 303 +MX53_PAD_CSI0_DAT5__IPU_CSI0_D_5 304 +MX53_PAD_CSI0_DAT5__GPIO5_23 305 +MX53_PAD_CSI0_DAT5__KPP_ROW_5 306 +MX53_PAD_CSI0_DAT5__ECSPI1_MOSI 307 +MX53_PAD_CSI0_DAT5__USBOH3_USBH3_NXT 308 +MX53_PAD_CSI0_DAT5__AUDMUX_AUD3_TXD 309 +MX53_PAD_CSI0_DAT5__EMI_EMI_DEBUG_34 310 +MX53_PAD_CSI0_DAT5__TPIU_TRACE_2 311 +MX53_PAD_CSI0_DAT6__IPU_CSI0_D_6 312 +MX53_PAD_CSI0_DAT6__GPIO5_24 313 +MX53_PAD_CSI0_DAT6__KPP_COL_6 314 +MX53_PAD_CSI0_DAT6__ECSPI1_MISO 315 +MX53_PAD_CSI0_DAT6__USBOH3_USBH3_CLK 316 +MX53_PAD_CSI0_DAT6__AUDMUX_AUD3_TXFS 317 +MX53_PAD_CSI0_DAT6__EMI_EMI_DEBUG_35 318 +MX53_PAD_CSI0_DAT6__TPIU_TRACE_3 319 +MX53_PAD_CSI0_DAT7__IPU_CSI0_D_7 320 +MX53_PAD_CSI0_DAT7__GPIO5_25 321 +MX53_PAD_CSI0_DAT7__KPP_ROW_6 322 +MX53_PAD_CSI0_DAT7__ECSPI1_SS0 323 +MX53_PAD_CSI0_DAT7__USBOH3_USBH3_DIR 324 +MX53_PAD_CSI0_DAT7__AUDMUX_AUD3_RXD 325 +MX53_PAD_CSI0_DAT7__EMI_EMI_DEBUG_36 326 +MX53_PAD_CSI0_DAT7__TPIU_TRACE_4 327 +MX53_PAD_CSI0_DAT8__IPU_CSI0_D_8 328 +MX53_PAD_CSI0_DAT8__GPIO5_26 329 +MX53_PAD_CSI0_DAT8__KPP_COL_7 330 +MX53_PAD_CSI0_DAT8__ECSPI2_SCLK 331 +MX53_PAD_CSI0_DAT8__USBOH3_USBH3_OC 332 +MX53_PAD_CSI0_DAT8__I2C1_SDA 333 +MX53_PAD_CSI0_DAT8__EMI_EMI_DEBUG_37 334 +MX53_PAD_CSI0_DAT8__TPIU_TRACE_5 335 +MX53_PAD_CSI0_DAT9__IPU_CSI0_D_9 336 +MX53_PAD_CSI0_DAT9__GPIO5_27 337 +MX53_PAD_CSI0_DAT9__KPP_ROW_7 338 +MX53_PAD_CSI0_DAT9__ECSPI2_MOSI 339 +MX53_PAD_CSI0_DAT9__USBOH3_USBH3_PWR 340 +MX53_PAD_CSI0_DAT9__I2C1_SCL 341 +MX53_PAD_CSI0_DAT9__EMI_EMI_DEBUG_38 342 +MX53_PAD_CSI0_DAT9__TPIU_TRACE_6 343 +MX53_PAD_CSI0_DAT10__IPU_CSI0_D_10 344 +MX53_PAD_CSI0_DAT10__GPIO5_28 345 +MX53_PAD_CSI0_DAT10__UART1_TXD_MUX 346 +MX53_PAD_CSI0_DAT10__ECSPI2_MISO 347 +MX53_PAD_CSI0_DAT10__AUDMUX_AUD3_RXC 348 +MX53_PAD_CSI0_DAT10__SDMA_DEBUG_PC_4 349 +MX53_PAD_CSI0_DAT10__EMI_EMI_DEBUG_39 350 +MX53_PAD_CSI0_DAT10__TPIU_TRACE_7 351 +MX53_PAD_CSI0_DAT11__IPU_CSI0_D_11 352 +MX53_PAD_CSI0_DAT11__GPIO5_29 353 +MX53_PAD_CSI0_DAT11__UART1_RXD_MUX 354 +MX53_PAD_CSI0_DAT11__ECSPI2_SS0 355 +MX53_PAD_CSI0_DAT11__AUDMUX_AUD3_RXFS 356 +MX53_PAD_CSI0_DAT11__SDMA_DEBUG_PC_5 357 +MX53_PAD_CSI0_DAT11__EMI_EMI_DEBUG_40 358 +MX53_PAD_CSI0_DAT11__TPIU_TRACE_8 359 +MX53_PAD_CSI0_DAT12__IPU_CSI0_D_12 360 +MX53_PAD_CSI0_DAT12__GPIO5_30 361 +MX53_PAD_CSI0_DAT12__UART4_TXD_MUX 362 +MX53_PAD_CSI0_DAT12__USBOH3_USBH3_DATA_0 363 +MX53_PAD_CSI0_DAT12__SDMA_DEBUG_PC_6 364 +MX53_PAD_CSI0_DAT12__EMI_EMI_DEBUG_41 365 +MX53_PAD_CSI0_DAT12__TPIU_TRACE_9 366 +MX53_PAD_CSI0_DAT13__IPU_CSI0_D_13 367 +MX53_PAD_CSI0_DAT13__GPIO5_31 368 +MX53_PAD_CSI0_DAT13__UART4_RXD_MUX 369 +MX53_PAD_CSI0_DAT13__USBOH3_USBH3_DATA_1 370 +MX53_PAD_CSI0_DAT13__SDMA_DEBUG_PC_7 371 +MX53_PAD_CSI0_DAT13__EMI_EMI_DEBUG_42 372 +MX53_PAD_CSI0_DAT13__TPIU_TRACE_10 373 +MX53_PAD_CSI0_DAT14__IPU_CSI0_D_14 374 +MX53_PAD_CSI0_DAT14__GPIO6_0 375 +MX53_PAD_CSI0_DAT14__UART5_TXD_MUX 376 +MX53_PAD_CSI0_DAT14__USBOH3_USBH3_DATA_2 377 +MX53_PAD_CSI0_DAT14__SDMA_DEBUG_PC_8 378 +MX53_PAD_CSI0_DAT14__EMI_EMI_DEBUG_43 379 +MX53_PAD_CSI0_DAT14__TPIU_TRACE_11 380 +MX53_PAD_CSI0_DAT15__IPU_CSI0_D_15 381 +MX53_PAD_CSI0_DAT15__GPIO6_1 382 +MX53_PAD_CSI0_DAT15__UART5_RXD_MUX 383 +MX53_PAD_CSI0_DAT15__USBOH3_USBH3_DATA_3 384 +MX53_PAD_CSI0_DAT15__SDMA_DEBUG_PC_9 385 +MX53_PAD_CSI0_DAT15__EMI_EMI_DEBUG_44 386 +MX53_PAD_CSI0_DAT15__TPIU_TRACE_12 387 +MX53_PAD_CSI0_DAT16__IPU_CSI0_D_16 388 +MX53_PAD_CSI0_DAT16__GPIO6_2 389 +MX53_PAD_CSI0_DAT16__UART4_RTS 390 +MX53_PAD_CSI0_DAT16__USBOH3_USBH3_DATA_4 391 +MX53_PAD_CSI0_DAT16__SDMA_DEBUG_PC_10 392 +MX53_PAD_CSI0_DAT16__EMI_EMI_DEBUG_45 393 +MX53_PAD_CSI0_DAT16__TPIU_TRACE_13 394 +MX53_PAD_CSI0_DAT17__IPU_CSI0_D_17 395 +MX53_PAD_CSI0_DAT17__GPIO6_3 396 +MX53_PAD_CSI0_DAT17__UART4_CTS 397 +MX53_PAD_CSI0_DAT17__USBOH3_USBH3_DATA_5 398 +MX53_PAD_CSI0_DAT17__SDMA_DEBUG_PC_11 399 +MX53_PAD_CSI0_DAT17__EMI_EMI_DEBUG_46 400 +MX53_PAD_CSI0_DAT17__TPIU_TRACE_14 401 +MX53_PAD_CSI0_DAT18__IPU_CSI0_D_18 402 +MX53_PAD_CSI0_DAT18__GPIO6_4 403 +MX53_PAD_CSI0_DAT18__UART5_RTS 404 +MX53_PAD_CSI0_DAT18__USBOH3_USBH3_DATA_6 405 +MX53_PAD_CSI0_DAT18__SDMA_DEBUG_PC_12 406 +MX53_PAD_CSI0_DAT18__EMI_EMI_DEBUG_47 407 +MX53_PAD_CSI0_DAT18__TPIU_TRACE_15 408 +MX53_PAD_CSI0_DAT19__IPU_CSI0_D_19 409 +MX53_PAD_CSI0_DAT19__GPIO6_5 410 +MX53_PAD_CSI0_DAT19__UART5_CTS 411 +MX53_PAD_CSI0_DAT19__USBOH3_USBH3_DATA_7 412 +MX53_PAD_CSI0_DAT19__SDMA_DEBUG_PC_13 413 +MX53_PAD_CSI0_DAT19__EMI_EMI_DEBUG_48 414 +MX53_PAD_CSI0_DAT19__USBPHY2_BISTOK 415 +MX53_PAD_EIM_A25__EMI_WEIM_A_25 416 +MX53_PAD_EIM_A25__GPIO5_2 417 +MX53_PAD_EIM_A25__ECSPI2_RDY 418 +MX53_PAD_EIM_A25__IPU_DI1_PIN12 419 +MX53_PAD_EIM_A25__CSPI_SS1 420 +MX53_PAD_EIM_A25__IPU_DI0_D1_CS 421 +MX53_PAD_EIM_A25__USBPHY1_BISTOK 422 +MX53_PAD_EIM_EB2__EMI_WEIM_EB_2 423 +MX53_PAD_EIM_EB2__GPIO2_30 424 +MX53_PAD_EIM_EB2__CCM_DI1_EXT_CLK 425 +MX53_PAD_EIM_EB2__IPU_SER_DISP1_CS 426 +MX53_PAD_EIM_EB2__ECSPI1_SS0 427 +MX53_PAD_EIM_EB2__I2C2_SCL 428 +MX53_PAD_EIM_D16__EMI_WEIM_D_16 429 +MX53_PAD_EIM_D16__GPIO3_16 430 +MX53_PAD_EIM_D16__IPU_DI0_PIN5 431 +MX53_PAD_EIM_D16__IPU_DISPB1_SER_CLK 432 +MX53_PAD_EIM_D16__ECSPI1_SCLK 433 +MX53_PAD_EIM_D16__I2C2_SDA 434 +MX53_PAD_EIM_D17__EMI_WEIM_D_17 435 +MX53_PAD_EIM_D17__GPIO3_17 436 +MX53_PAD_EIM_D17__IPU_DI0_PIN6 437 +MX53_PAD_EIM_D17__IPU_DISPB1_SER_DIN 438 +MX53_PAD_EIM_D17__ECSPI1_MISO 439 +MX53_PAD_EIM_D17__I2C3_SCL 440 +MX53_PAD_EIM_D18__EMI_WEIM_D_18 441 +MX53_PAD_EIM_D18__GPIO3_18 442 +MX53_PAD_EIM_D18__IPU_DI0_PIN7 443 +MX53_PAD_EIM_D18__IPU_DISPB1_SER_DIO 444 +MX53_PAD_EIM_D18__ECSPI1_MOSI 445 +MX53_PAD_EIM_D18__I2C3_SDA 446 +MX53_PAD_EIM_D18__IPU_DI1_D0_CS 447 +MX53_PAD_EIM_D19__EMI_WEIM_D_19 448 +MX53_PAD_EIM_D19__GPIO3_19 449 +MX53_PAD_EIM_D19__IPU_DI0_PIN8 450 +MX53_PAD_EIM_D19__IPU_DISPB1_SER_RS 451 +MX53_PAD_EIM_D19__ECSPI1_SS1 452 +MX53_PAD_EIM_D19__EPIT1_EPITO 453 +MX53_PAD_EIM_D19__UART1_CTS 454 +MX53_PAD_EIM_D19__USBOH3_USBH2_OC 455 +MX53_PAD_EIM_D20__EMI_WEIM_D_20 456 +MX53_PAD_EIM_D20__GPIO3_20 457 +MX53_PAD_EIM_D20__IPU_DI0_PIN16 458 +MX53_PAD_EIM_D20__IPU_SER_DISP0_CS 459 +MX53_PAD_EIM_D20__CSPI_SS0 460 +MX53_PAD_EIM_D20__EPIT2_EPITO 461 +MX53_PAD_EIM_D20__UART1_RTS 462 +MX53_PAD_EIM_D20__USBOH3_USBH2_PWR 463 +MX53_PAD_EIM_D21__EMI_WEIM_D_21 464 +MX53_PAD_EIM_D21__GPIO3_21 465 +MX53_PAD_EIM_D21__IPU_DI0_PIN17 466 +MX53_PAD_EIM_D21__IPU_DISPB0_SER_CLK 467 +MX53_PAD_EIM_D21__CSPI_SCLK 468 +MX53_PAD_EIM_D21__I2C1_SCL 469 +MX53_PAD_EIM_D21__USBOH3_USBOTG_OC 470 +MX53_PAD_EIM_D22__EMI_WEIM_D_22 471 +MX53_PAD_EIM_D22__GPIO3_22 472 +MX53_PAD_EIM_D22__IPU_DI0_PIN1 473 +MX53_PAD_EIM_D22__IPU_DISPB0_SER_DIN 474 +MX53_PAD_EIM_D22__CSPI_MISO 475 +MX53_PAD_EIM_D22__USBOH3_USBOTG_PWR 476 +MX53_PAD_EIM_D23__EMI_WEIM_D_23 477 +MX53_PAD_EIM_D23__GPIO3_23 478 +MX53_PAD_EIM_D23__UART3_CTS 479 +MX53_PAD_EIM_D23__UART1_DCD 480 +MX53_PAD_EIM_D23__IPU_DI0_D0_CS 481 +MX53_PAD_EIM_D23__IPU_DI1_PIN2 482 +MX53_PAD_EIM_D23__IPU_CSI1_DATA_EN 483 +MX53_PAD_EIM_D23__IPU_DI1_PIN14 484 +MX53_PAD_EIM_EB3__EMI_WEIM_EB_3 485 +MX53_PAD_EIM_EB3__GPIO2_31 486 +MX53_PAD_EIM_EB3__UART3_RTS 487 +MX53_PAD_EIM_EB3__UART1_RI 488 +MX53_PAD_EIM_EB3__IPU_DI1_PIN3 489 +MX53_PAD_EIM_EB3__IPU_CSI1_HSYNC 490 +MX53_PAD_EIM_EB3__IPU_DI1_PIN16 491 +MX53_PAD_EIM_D24__EMI_WEIM_D_24 492 +MX53_PAD_EIM_D24__GPIO3_24 493 +MX53_PAD_EIM_D24__UART3_TXD_MUX 494 +MX53_PAD_EIM_D24__ECSPI1_SS2 495 +MX53_PAD_EIM_D24__CSPI_SS2 496 +MX53_PAD_EIM_D24__AUDMUX_AUD5_RXFS 497 +MX53_PAD_EIM_D24__ECSPI2_SS2 498 +MX53_PAD_EIM_D24__UART1_DTR 499 +MX53_PAD_EIM_D25__EMI_WEIM_D_25 500 +MX53_PAD_EIM_D25__GPIO3_25 501 +MX53_PAD_EIM_D25__UART3_RXD_MUX 502 +MX53_PAD_EIM_D25__ECSPI1_SS3 503 +MX53_PAD_EIM_D25__CSPI_SS3 504 +MX53_PAD_EIM_D25__AUDMUX_AUD5_RXC 505 +MX53_PAD_EIM_D25__ECSPI2_SS3 506 +MX53_PAD_EIM_D25__UART1_DSR 507 +MX53_PAD_EIM_D26__EMI_WEIM_D_26 508 +MX53_PAD_EIM_D26__GPIO3_26 509 +MX53_PAD_EIM_D26__UART2_TXD_MUX 510 +MX53_PAD_EIM_D26__FIRI_RXD 511 +MX53_PAD_EIM_D26__IPU_CSI0_D_1 512 +MX53_PAD_EIM_D26__IPU_DI1_PIN11 513 +MX53_PAD_EIM_D26__IPU_SISG_2 514 +MX53_PAD_EIM_D26__IPU_DISP1_DAT_22 515 +MX53_PAD_EIM_D27__EMI_WEIM_D_27 516 +MX53_PAD_EIM_D27__GPIO3_27 517 +MX53_PAD_EIM_D27__UART2_RXD_MUX 518 +MX53_PAD_EIM_D27__FIRI_TXD 519 +MX53_PAD_EIM_D27__IPU_CSI0_D_0 520 +MX53_PAD_EIM_D27__IPU_DI1_PIN13 521 +MX53_PAD_EIM_D27__IPU_SISG_3 522 +MX53_PAD_EIM_D27__IPU_DISP1_DAT_23 523 +MX53_PAD_EIM_D28__EMI_WEIM_D_28 524 +MX53_PAD_EIM_D28__GPIO3_28 525 +MX53_PAD_EIM_D28__UART2_CTS 526 +MX53_PAD_EIM_D28__IPU_DISPB0_SER_DIO 527 +MX53_PAD_EIM_D28__CSPI_MOSI 528 +MX53_PAD_EIM_D28__I2C1_SDA 529 +MX53_PAD_EIM_D28__IPU_EXT_TRIG 530 +MX53_PAD_EIM_D28__IPU_DI0_PIN13 531 +MX53_PAD_EIM_D29__EMI_WEIM_D_29 532 +MX53_PAD_EIM_D29__GPIO3_29 533 +MX53_PAD_EIM_D29__UART2_RTS 534 +MX53_PAD_EIM_D29__IPU_DISPB0_SER_RS 535 +MX53_PAD_EIM_D29__CSPI_SS0 536 +MX53_PAD_EIM_D29__IPU_DI1_PIN15 537 +MX53_PAD_EIM_D29__IPU_CSI1_VSYNC 538 +MX53_PAD_EIM_D29__IPU_DI0_PIN14 539 +MX53_PAD_EIM_D30__EMI_WEIM_D_30 540 +MX53_PAD_EIM_D30__GPIO3_30 541 +MX53_PAD_EIM_D30__UART3_CTS 542 +MX53_PAD_EIM_D30__IPU_CSI0_D_3 543 +MX53_PAD_EIM_D30__IPU_DI0_PIN11 544 +MX53_PAD_EIM_D30__IPU_DISP1_DAT_21 545 +MX53_PAD_EIM_D30__USBOH3_USBH1_OC 546 +MX53_PAD_EIM_D30__USBOH3_USBH2_OC 547 +MX53_PAD_EIM_D31__EMI_WEIM_D_31 548 +MX53_PAD_EIM_D31__GPIO3_31 549 +MX53_PAD_EIM_D31__UART3_RTS 550 +MX53_PAD_EIM_D31__IPU_CSI0_D_2 551 +MX53_PAD_EIM_D31__IPU_DI0_PIN12 552 +MX53_PAD_EIM_D31__IPU_DISP1_DAT_20 553 +MX53_PAD_EIM_D31__USBOH3_USBH1_PWR 554 +MX53_PAD_EIM_D31__USBOH3_USBH2_PWR 555 +MX53_PAD_EIM_A24__EMI_WEIM_A_24 556 +MX53_PAD_EIM_A24__GPIO5_4 557 +MX53_PAD_EIM_A24__IPU_DISP1_DAT_19 558 +MX53_PAD_EIM_A24__IPU_CSI1_D_19 559 +MX53_PAD_EIM_A24__IPU_SISG_2 560 +MX53_PAD_EIM_A24__USBPHY2_BVALID 561 +MX53_PAD_EIM_A23__EMI_WEIM_A_23 562 +MX53_PAD_EIM_A23__GPIO6_6 563 +MX53_PAD_EIM_A23__IPU_DISP1_DAT_18 564 +MX53_PAD_EIM_A23__IPU_CSI1_D_18 565 +MX53_PAD_EIM_A23__IPU_SISG_3 566 +MX53_PAD_EIM_A23__USBPHY2_ENDSESSION 567 +MX53_PAD_EIM_A22__EMI_WEIM_A_22 568 +MX53_PAD_EIM_A22__GPIO2_16 569 +MX53_PAD_EIM_A22__IPU_DISP1_DAT_17 570 +MX53_PAD_EIM_A22__IPU_CSI1_D_17 571 +MX53_PAD_EIM_A22__SRC_BT_CFG1_7 572 +MX53_PAD_EIM_A21__EMI_WEIM_A_21 573 +MX53_PAD_EIM_A21__GPIO2_17 574 +MX53_PAD_EIM_A21__IPU_DISP1_DAT_16 575 +MX53_PAD_EIM_A21__IPU_CSI1_D_16 576 +MX53_PAD_EIM_A21__SRC_BT_CFG1_6 577 +MX53_PAD_EIM_A20__EMI_WEIM_A_20 578 +MX53_PAD_EIM_A20__GPIO2_18 579 +MX53_PAD_EIM_A20__IPU_DISP1_DAT_15 580 +MX53_PAD_EIM_A20__IPU_CSI1_D_15 581 +MX53_PAD_EIM_A20__SRC_BT_CFG1_5 582 +MX53_PAD_EIM_A19__EMI_WEIM_A_19 583 +MX53_PAD_EIM_A19__GPIO2_19 584 +MX53_PAD_EIM_A19__IPU_DISP1_DAT_14 585 +MX53_PAD_EIM_A19__IPU_CSI1_D_14 586 +MX53_PAD_EIM_A19__SRC_BT_CFG1_4 587 +MX53_PAD_EIM_A18__EMI_WEIM_A_18 588 +MX53_PAD_EIM_A18__GPIO2_20 589 +MX53_PAD_EIM_A18__IPU_DISP1_DAT_13 590 +MX53_PAD_EIM_A18__IPU_CSI1_D_13 591 +MX53_PAD_EIM_A18__SRC_BT_CFG1_3 592 +MX53_PAD_EIM_A17__EMI_WEIM_A_17 593 +MX53_PAD_EIM_A17__GPIO2_21 594 +MX53_PAD_EIM_A17__IPU_DISP1_DAT_12 595 +MX53_PAD_EIM_A17__IPU_CSI1_D_12 596 +MX53_PAD_EIM_A17__SRC_BT_CFG1_2 597 +MX53_PAD_EIM_A16__EMI_WEIM_A_16 598 +MX53_PAD_EIM_A16__GPIO2_22 599 +MX53_PAD_EIM_A16__IPU_DI1_DISP_CLK 600 +MX53_PAD_EIM_A16__IPU_CSI1_PIXCLK 601 +MX53_PAD_EIM_A16__SRC_BT_CFG1_1 602 +MX53_PAD_EIM_CS0__EMI_WEIM_CS_0 603 +MX53_PAD_EIM_CS0__GPIO2_23 604 +MX53_PAD_EIM_CS0__ECSPI2_SCLK 605 +MX53_PAD_EIM_CS0__IPU_DI1_PIN5 606 +MX53_PAD_EIM_CS1__EMI_WEIM_CS_1 607 +MX53_PAD_EIM_CS1__GPIO2_24 608 +MX53_PAD_EIM_CS1__ECSPI2_MOSI 609 +MX53_PAD_EIM_CS1__IPU_DI1_PIN6 610 +MX53_PAD_EIM_OE__EMI_WEIM_OE 611 +MX53_PAD_EIM_OE__GPIO2_25 612 +MX53_PAD_EIM_OE__ECSPI2_MISO 613 +MX53_PAD_EIM_OE__IPU_DI1_PIN7 614 +MX53_PAD_EIM_OE__USBPHY2_IDDIG 615 +MX53_PAD_EIM_RW__EMI_WEIM_RW 616 +MX53_PAD_EIM_RW__GPIO2_26 617 +MX53_PAD_EIM_RW__ECSPI2_SS0 618 +MX53_PAD_EIM_RW__IPU_DI1_PIN8 619 +MX53_PAD_EIM_RW__USBPHY2_HOSTDISCONNECT 620 +MX53_PAD_EIM_LBA__EMI_WEIM_LBA 621 +MX53_PAD_EIM_LBA__GPIO2_27 622 +MX53_PAD_EIM_LBA__ECSPI2_SS1 623 +MX53_PAD_EIM_LBA__IPU_DI1_PIN17 624 +MX53_PAD_EIM_LBA__SRC_BT_CFG1_0 625 +MX53_PAD_EIM_EB0__EMI_WEIM_EB_0 626 +MX53_PAD_EIM_EB0__GPIO2_28 627 +MX53_PAD_EIM_EB0__IPU_DISP1_DAT_11 628 +MX53_PAD_EIM_EB0__IPU_CSI1_D_11 629 +MX53_PAD_EIM_EB0__GPC_PMIC_RDY 630 +MX53_PAD_EIM_EB0__SRC_BT_CFG2_7 631 +MX53_PAD_EIM_EB1__EMI_WEIM_EB_1 632 +MX53_PAD_EIM_EB1__GPIO2_29 633 +MX53_PAD_EIM_EB1__IPU_DISP1_DAT_10 634 +MX53_PAD_EIM_EB1__IPU_CSI1_D_10 635 +MX53_PAD_EIM_EB1__SRC_BT_CFG2_6 636 +MX53_PAD_EIM_DA0__EMI_NAND_WEIM_DA_0 637 +MX53_PAD_EIM_DA0__GPIO3_0 638 +MX53_PAD_EIM_DA0__IPU_DISP1_DAT_9 639 +MX53_PAD_EIM_DA0__IPU_CSI1_D_9 640 +MX53_PAD_EIM_DA0__SRC_BT_CFG2_5 641 +MX53_PAD_EIM_DA1__EMI_NAND_WEIM_DA_1 642 +MX53_PAD_EIM_DA1__GPIO3_1 643 +MX53_PAD_EIM_DA1__IPU_DISP1_DAT_8 644 +MX53_PAD_EIM_DA1__IPU_CSI1_D_8 645 +MX53_PAD_EIM_DA1__SRC_BT_CFG2_4 646 +MX53_PAD_EIM_DA2__EMI_NAND_WEIM_DA_2 647 +MX53_PAD_EIM_DA2__GPIO3_2 648 +MX53_PAD_EIM_DA2__IPU_DISP1_DAT_7 649 +MX53_PAD_EIM_DA2__IPU_CSI1_D_7 650 +MX53_PAD_EIM_DA2__SRC_BT_CFG2_3 651 +MX53_PAD_EIM_DA3__EMI_NAND_WEIM_DA_3 652 +MX53_PAD_EIM_DA3__GPIO3_3 653 +MX53_PAD_EIM_DA3__IPU_DISP1_DAT_6 654 +MX53_PAD_EIM_DA3__IPU_CSI1_D_6 655 +MX53_PAD_EIM_DA3__SRC_BT_CFG2_2 656 +MX53_PAD_EIM_DA4__EMI_NAND_WEIM_DA_4 657 +MX53_PAD_EIM_DA4__GPIO3_4 658 +MX53_PAD_EIM_DA4__IPU_DISP1_DAT_5 659 +MX53_PAD_EIM_DA4__IPU_CSI1_D_5 660 +MX53_PAD_EIM_DA4__SRC_BT_CFG3_7 661 +MX53_PAD_EIM_DA5__EMI_NAND_WEIM_DA_5 662 +MX53_PAD_EIM_DA5__GPIO3_5 663 +MX53_PAD_EIM_DA5__IPU_DISP1_DAT_4 664 +MX53_PAD_EIM_DA5__IPU_CSI1_D_4 665 +MX53_PAD_EIM_DA5__SRC_BT_CFG3_6 666 +MX53_PAD_EIM_DA6__EMI_NAND_WEIM_DA_6 667 +MX53_PAD_EIM_DA6__GPIO3_6 668 +MX53_PAD_EIM_DA6__IPU_DISP1_DAT_3 669 +MX53_PAD_EIM_DA6__IPU_CSI1_D_3 670 +MX53_PAD_EIM_DA6__SRC_BT_CFG3_5 671 +MX53_PAD_EIM_DA7__EMI_NAND_WEIM_DA_7 672 +MX53_PAD_EIM_DA7__GPIO3_7 673 +MX53_PAD_EIM_DA7__IPU_DISP1_DAT_2 674 +MX53_PAD_EIM_DA7__IPU_CSI1_D_2 675 +MX53_PAD_EIM_DA7__SRC_BT_CFG3_4 676 +MX53_PAD_EIM_DA8__EMI_NAND_WEIM_DA_8 677 +MX53_PAD_EIM_DA8__GPIO3_8 678 +MX53_PAD_EIM_DA8__IPU_DISP1_DAT_1 679 +MX53_PAD_EIM_DA8__IPU_CSI1_D_1 680 +MX53_PAD_EIM_DA8__SRC_BT_CFG3_3 681 +MX53_PAD_EIM_DA9__EMI_NAND_WEIM_DA_9 682 +MX53_PAD_EIM_DA9__GPIO3_9 683 +MX53_PAD_EIM_DA9__IPU_DISP1_DAT_0 684 +MX53_PAD_EIM_DA9__IPU_CSI1_D_0 685 +MX53_PAD_EIM_DA9__SRC_BT_CFG3_2 686 +MX53_PAD_EIM_DA10__EMI_NAND_WEIM_DA_10 687 +MX53_PAD_EIM_DA10__GPIO3_10 688 +MX53_PAD_EIM_DA10__IPU_DI1_PIN15 689 +MX53_PAD_EIM_DA10__IPU_CSI1_DATA_EN 690 +MX53_PAD_EIM_DA10__SRC_BT_CFG3_1 691 +MX53_PAD_EIM_DA11__EMI_NAND_WEIM_DA_11 692 +MX53_PAD_EIM_DA11__GPIO3_11 693 +MX53_PAD_EIM_DA11__IPU_DI1_PIN2 694 +MX53_PAD_EIM_DA11__IPU_CSI1_HSYNC 695 +MX53_PAD_EIM_DA12__EMI_NAND_WEIM_DA_12 696 +MX53_PAD_EIM_DA12__GPIO3_12 697 +MX53_PAD_EIM_DA12__IPU_DI1_PIN3 698 +MX53_PAD_EIM_DA12__IPU_CSI1_VSYNC 699 +MX53_PAD_EIM_DA13__EMI_NAND_WEIM_DA_13 700 +MX53_PAD_EIM_DA13__GPIO3_13 701 +MX53_PAD_EIM_DA13__IPU_DI1_D0_CS 702 +MX53_PAD_EIM_DA13__CCM_DI1_EXT_CLK 703 +MX53_PAD_EIM_DA14__EMI_NAND_WEIM_DA_14 704 +MX53_PAD_EIM_DA14__GPIO3_14 705 +MX53_PAD_EIM_DA14__IPU_DI1_D1_CS 706 +MX53_PAD_EIM_DA14__CCM_DI0_EXT_CLK 707 +MX53_PAD_EIM_DA15__EMI_NAND_WEIM_DA_15 708 +MX53_PAD_EIM_DA15__GPIO3_15 709 +MX53_PAD_EIM_DA15__IPU_DI1_PIN1 710 +MX53_PAD_EIM_DA15__IPU_DI1_PIN4 711 +MX53_PAD_NANDF_WE_B__EMI_NANDF_WE_B 712 +MX53_PAD_NANDF_WE_B__GPIO6_12 713 +MX53_PAD_NANDF_RE_B__EMI_NANDF_RE_B 714 +MX53_PAD_NANDF_RE_B__GPIO6_13 715 +MX53_PAD_EIM_WAIT__EMI_WEIM_WAIT 716 +MX53_PAD_EIM_WAIT__GPIO5_0 717 +MX53_PAD_EIM_WAIT__EMI_WEIM_DTACK_B 718 +MX53_PAD_LVDS1_TX3_P__GPIO6_22 719 +MX53_PAD_LVDS1_TX3_P__LDB_LVDS1_TX3 720 +MX53_PAD_LVDS1_TX2_P__GPIO6_24 721 +MX53_PAD_LVDS1_TX2_P__LDB_LVDS1_TX2 722 +MX53_PAD_LVDS1_CLK_P__GPIO6_26 723 +MX53_PAD_LVDS1_CLK_P__LDB_LVDS1_CLK 724 +MX53_PAD_LVDS1_TX1_P__GPIO6_28 725 +MX53_PAD_LVDS1_TX1_P__LDB_LVDS1_TX1 726 +MX53_PAD_LVDS1_TX0_P__GPIO6_30 727 +MX53_PAD_LVDS1_TX0_P__LDB_LVDS1_TX0 728 +MX53_PAD_LVDS0_TX3_P__GPIO7_22 729 +MX53_PAD_LVDS0_TX3_P__LDB_LVDS0_TX3 730 +MX53_PAD_LVDS0_CLK_P__GPIO7_24 731 +MX53_PAD_LVDS0_CLK_P__LDB_LVDS0_CLK 732 +MX53_PAD_LVDS0_TX2_P__GPIO7_26 733 +MX53_PAD_LVDS0_TX2_P__LDB_LVDS0_TX2 734 +MX53_PAD_LVDS0_TX1_P__GPIO7_28 735 +MX53_PAD_LVDS0_TX1_P__LDB_LVDS0_TX1 736 +MX53_PAD_LVDS0_TX0_P__GPIO7_30 737 +MX53_PAD_LVDS0_TX0_P__LDB_LVDS0_TX0 738 +MX53_PAD_GPIO_10__GPIO4_0 739 +MX53_PAD_GPIO_10__OSC32k_32K_OUT 740 +MX53_PAD_GPIO_11__GPIO4_1 741 +MX53_PAD_GPIO_12__GPIO4_2 742 +MX53_PAD_GPIO_13__GPIO4_3 743 +MX53_PAD_GPIO_14__GPIO4_4 744 +MX53_PAD_NANDF_CLE__EMI_NANDF_CLE 745 +MX53_PAD_NANDF_CLE__GPIO6_7 746 +MX53_PAD_NANDF_CLE__USBPHY1_VSTATUS_0 747 +MX53_PAD_NANDF_ALE__EMI_NANDF_ALE 748 +MX53_PAD_NANDF_ALE__GPIO6_8 749 +MX53_PAD_NANDF_ALE__USBPHY1_VSTATUS_1 750 +MX53_PAD_NANDF_WP_B__EMI_NANDF_WP_B 751 +MX53_PAD_NANDF_WP_B__GPIO6_9 752 +MX53_PAD_NANDF_WP_B__USBPHY1_VSTATUS_2 753 +MX53_PAD_NANDF_RB0__EMI_NANDF_RB_0 754 +MX53_PAD_NANDF_RB0__GPIO6_10 755 +MX53_PAD_NANDF_RB0__USBPHY1_VSTATUS_3 756 +MX53_PAD_NANDF_CS0__EMI_NANDF_CS_0 757 +MX53_PAD_NANDF_CS0__GPIO6_11 758 +MX53_PAD_NANDF_CS0__USBPHY1_VSTATUS_4 759 +MX53_PAD_NANDF_CS1__EMI_NANDF_CS_1 760 +MX53_PAD_NANDF_CS1__GPIO6_14 761 +MX53_PAD_NANDF_CS1__MLB_MLBCLK 762 +MX53_PAD_NANDF_CS1__USBPHY1_VSTATUS_5 763 +MX53_PAD_NANDF_CS2__EMI_NANDF_CS_2 764 +MX53_PAD_NANDF_CS2__GPIO6_15 765 +MX53_PAD_NANDF_CS2__IPU_SISG_0 766 +MX53_PAD_NANDF_CS2__ESAI1_TX0 767 +MX53_PAD_NANDF_CS2__EMI_WEIM_CRE 768 +MX53_PAD_NANDF_CS2__CCM_CSI0_MCLK 769 +MX53_PAD_NANDF_CS2__MLB_MLBSIG 770 +MX53_PAD_NANDF_CS2__USBPHY1_VSTATUS_6 771 +MX53_PAD_NANDF_CS3__EMI_NANDF_CS_3 772 +MX53_PAD_NANDF_CS3__GPIO6_16 773 +MX53_PAD_NANDF_CS3__IPU_SISG_1 774 +MX53_PAD_NANDF_CS3__ESAI1_TX1 775 +MX53_PAD_NANDF_CS3__EMI_WEIM_A_26 776 +MX53_PAD_NANDF_CS3__MLB_MLBDAT 777 +MX53_PAD_NANDF_CS3__USBPHY1_VSTATUS_7 778 +MX53_PAD_FEC_MDIO__FEC_MDIO 779 +MX53_PAD_FEC_MDIO__GPIO1_22 780 +MX53_PAD_FEC_MDIO__ESAI1_SCKR 781 +MX53_PAD_FEC_MDIO__FEC_COL 782 +MX53_PAD_FEC_MDIO__RTC_CE_RTC_PS2 783 +MX53_PAD_FEC_MDIO__SDMA_DEBUG_BUS_DEVICE_3 784 +MX53_PAD_FEC_MDIO__EMI_EMI_DEBUG_49 785 +MX53_PAD_FEC_REF_CLK__FEC_TX_CLK 786 +MX53_PAD_FEC_REF_CLK__GPIO1_23 787 +MX53_PAD_FEC_REF_CLK__ESAI1_FSR 788 +MX53_PAD_FEC_REF_CLK__SDMA_DEBUG_BUS_DEVICE_4 789 +MX53_PAD_FEC_REF_CLK__EMI_EMI_DEBUG_50 790 +MX53_PAD_FEC_RX_ER__FEC_RX_ER 791 +MX53_PAD_FEC_RX_ER__GPIO1_24 792 +MX53_PAD_FEC_RX_ER__ESAI1_HCKR 793 +MX53_PAD_FEC_RX_ER__FEC_RX_CLK 794 +MX53_PAD_FEC_RX_ER__RTC_CE_RTC_PS3 795 +MX53_PAD_FEC_CRS_DV__FEC_RX_DV 796 +MX53_PAD_FEC_CRS_DV__GPIO1_25 797 +MX53_PAD_FEC_CRS_DV__ESAI1_SCKT 798 +MX53_PAD_FEC_RXD1__FEC_RDATA_1 799 +MX53_PAD_FEC_RXD1__GPIO1_26 800 +MX53_PAD_FEC_RXD1__ESAI1_FST 801 +MX53_PAD_FEC_RXD1__MLB_MLBSIG 802 +MX53_PAD_FEC_RXD1__RTC_CE_RTC_PS1 803 +MX53_PAD_FEC_RXD0__FEC_RDATA_0 804 +MX53_PAD_FEC_RXD0__GPIO1_27 805 +MX53_PAD_FEC_RXD0__ESAI1_HCKT 806 +MX53_PAD_FEC_RXD0__OSC32k_32K_OUT 807 +MX53_PAD_FEC_TX_EN__FEC_TX_EN 808 +MX53_PAD_FEC_TX_EN__GPIO1_28 809 +MX53_PAD_FEC_TX_EN__ESAI1_TX3_RX2 810 +MX53_PAD_FEC_TXD1__FEC_TDATA_1 811 +MX53_PAD_FEC_TXD1__GPIO1_29 812 +MX53_PAD_FEC_TXD1__ESAI1_TX2_RX3 813 +MX53_PAD_FEC_TXD1__MLB_MLBCLK 814 +MX53_PAD_FEC_TXD1__RTC_CE_RTC_PRSC_CLK 815 +MX53_PAD_FEC_TXD0__FEC_TDATA_0 816 +MX53_PAD_FEC_TXD0__GPIO1_30 817 +MX53_PAD_FEC_TXD0__ESAI1_TX4_RX1 818 +MX53_PAD_FEC_TXD0__USBPHY2_DATAOUT_0 819 +MX53_PAD_FEC_MDC__FEC_MDC 820 +MX53_PAD_FEC_MDC__GPIO1_31 821 +MX53_PAD_FEC_MDC__ESAI1_TX5_RX0 822 +MX53_PAD_FEC_MDC__MLB_MLBDAT 823 +MX53_PAD_FEC_MDC__RTC_CE_RTC_ALARM1_TRIG 824 +MX53_PAD_FEC_MDC__USBPHY2_DATAOUT_1 825 +MX53_PAD_PATA_DIOW__PATA_DIOW 826 +MX53_PAD_PATA_DIOW__GPIO6_17 827 +MX53_PAD_PATA_DIOW__UART1_TXD_MUX 828 +MX53_PAD_PATA_DIOW__USBPHY2_DATAOUT_2 829 +MX53_PAD_PATA_DMACK__PATA_DMACK 830 +MX53_PAD_PATA_DMACK__GPIO6_18 831 +MX53_PAD_PATA_DMACK__UART1_RXD_MUX 832 +MX53_PAD_PATA_DMACK__USBPHY2_DATAOUT_3 833 +MX53_PAD_PATA_DMARQ__PATA_DMARQ 834 +MX53_PAD_PATA_DMARQ__GPIO7_0 835 +MX53_PAD_PATA_DMARQ__UART2_TXD_MUX 836 +MX53_PAD_PATA_DMARQ__CCM_CCM_OUT_0 837 +MX53_PAD_PATA_DMARQ__USBPHY2_DATAOUT_4 838 +MX53_PAD_PATA_BUFFER_EN__PATA_BUFFER_EN 839 +MX53_PAD_PATA_BUFFER_EN__GPIO7_1 840 +MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX 841 +MX53_PAD_PATA_BUFFER_EN__CCM_CCM_OUT_1 842 +MX53_PAD_PATA_BUFFER_EN__USBPHY2_DATAOUT_5 843 +MX53_PAD_PATA_INTRQ__PATA_INTRQ 844 +MX53_PAD_PATA_INTRQ__GPIO7_2 845 +MX53_PAD_PATA_INTRQ__UART2_CTS 846 +MX53_PAD_PATA_INTRQ__CAN1_TXCAN 847 +MX53_PAD_PATA_INTRQ__CCM_CCM_OUT_2 848 +MX53_PAD_PATA_INTRQ__USBPHY2_DATAOUT_6 849 +MX53_PAD_PATA_DIOR__PATA_DIOR 850 +MX53_PAD_PATA_DIOR__GPIO7_3 851 +MX53_PAD_PATA_DIOR__UART2_RTS 852 +MX53_PAD_PATA_DIOR__CAN1_RXCAN 853 +MX53_PAD_PATA_DIOR__USBPHY2_DATAOUT_7 854 +MX53_PAD_PATA_RESET_B__PATA_PATA_RESET_B 855 +MX53_PAD_PATA_RESET_B__GPIO7_4 856 +MX53_PAD_PATA_RESET_B__ESDHC3_CMD 857 +MX53_PAD_PATA_RESET_B__UART1_CTS 858 +MX53_PAD_PATA_RESET_B__CAN2_TXCAN 859 +MX53_PAD_PATA_RESET_B__USBPHY1_DATAOUT_0 860 +MX53_PAD_PATA_IORDY__PATA_IORDY 861 +MX53_PAD_PATA_IORDY__GPIO7_5 862 +MX53_PAD_PATA_IORDY__ESDHC3_CLK 863 +MX53_PAD_PATA_IORDY__UART1_RTS 864 +MX53_PAD_PATA_IORDY__CAN2_RXCAN 865 +MX53_PAD_PATA_IORDY__USBPHY1_DATAOUT_1 866 +MX53_PAD_PATA_DA_0__PATA_DA_0 867 +MX53_PAD_PATA_DA_0__GPIO7_6 868 +MX53_PAD_PATA_DA_0__ESDHC3_RST 869 +MX53_PAD_PATA_DA_0__OWIRE_LINE 870 +MX53_PAD_PATA_DA_0__USBPHY1_DATAOUT_2 871 +MX53_PAD_PATA_DA_1__PATA_DA_1 872 +MX53_PAD_PATA_DA_1__GPIO7_7 873 +MX53_PAD_PATA_DA_1__ESDHC4_CMD 874 +MX53_PAD_PATA_DA_1__UART3_CTS 875 +MX53_PAD_PATA_DA_1__USBPHY1_DATAOUT_3 876 +MX53_PAD_PATA_DA_2__PATA_DA_2 877 +MX53_PAD_PATA_DA_2__GPIO7_8 878 +MX53_PAD_PATA_DA_2__ESDHC4_CLK 879 +MX53_PAD_PATA_DA_2__UART3_RTS 880 +MX53_PAD_PATA_DA_2__USBPHY1_DATAOUT_4 881 +MX53_PAD_PATA_CS_0__PATA_CS_0 882 +MX53_PAD_PATA_CS_0__GPIO7_9 883 +MX53_PAD_PATA_CS_0__UART3_TXD_MUX 884 +MX53_PAD_PATA_CS_0__USBPHY1_DATAOUT_5 885 +MX53_PAD_PATA_CS_1__PATA_CS_1 886 +MX53_PAD_PATA_CS_1__GPIO7_10 887 +MX53_PAD_PATA_CS_1__UART3_RXD_MUX 888 +MX53_PAD_PATA_CS_1__USBPHY1_DATAOUT_6 889 +MX53_PAD_PATA_DATA0__PATA_DATA_0 890 +MX53_PAD_PATA_DATA0__GPIO2_0 891 +MX53_PAD_PATA_DATA0__EMI_NANDF_D_0 892 +MX53_PAD_PATA_DATA0__ESDHC3_DAT4 893 +MX53_PAD_PATA_DATA0__GPU3d_GPU_DEBUG_OUT_0 894 +MX53_PAD_PATA_DATA0__IPU_DIAG_BUS_0 895 +MX53_PAD_PATA_DATA0__USBPHY1_DATAOUT_7 896 +MX53_PAD_PATA_DATA1__PATA_DATA_1 897 +MX53_PAD_PATA_DATA1__GPIO2_1 898 +MX53_PAD_PATA_DATA1__EMI_NANDF_D_1 899 +MX53_PAD_PATA_DATA1__ESDHC3_DAT5 900 +MX53_PAD_PATA_DATA1__GPU3d_GPU_DEBUG_OUT_1 901 +MX53_PAD_PATA_DATA1__IPU_DIAG_BUS_1 902 +MX53_PAD_PATA_DATA2__PATA_DATA_2 903 +MX53_PAD_PATA_DATA2__GPIO2_2 904 +MX53_PAD_PATA_DATA2__EMI_NANDF_D_2 905 +MX53_PAD_PATA_DATA2__ESDHC3_DAT6 906 +MX53_PAD_PATA_DATA2__GPU3d_GPU_DEBUG_OUT_2 907 +MX53_PAD_PATA_DATA2__IPU_DIAG_BUS_2 908 +MX53_PAD_PATA_DATA3__PATA_DATA_3 909 +MX53_PAD_PATA_DATA3__GPIO2_3 910 +MX53_PAD_PATA_DATA3__EMI_NANDF_D_3 911 +MX53_PAD_PATA_DATA3__ESDHC3_DAT7 912 +MX53_PAD_PATA_DATA3__GPU3d_GPU_DEBUG_OUT_3 913 +MX53_PAD_PATA_DATA3__IPU_DIAG_BUS_3 914 +MX53_PAD_PATA_DATA4__PATA_DATA_4 915 +MX53_PAD_PATA_DATA4__GPIO2_4 916 +MX53_PAD_PATA_DATA4__EMI_NANDF_D_4 917 +MX53_PAD_PATA_DATA4__ESDHC4_DAT4 918 +MX53_PAD_PATA_DATA4__GPU3d_GPU_DEBUG_OUT_4 919 +MX53_PAD_PATA_DATA4__IPU_DIAG_BUS_4 920 +MX53_PAD_PATA_DATA5__PATA_DATA_5 921 +MX53_PAD_PATA_DATA5__GPIO2_5 922 +MX53_PAD_PATA_DATA5__EMI_NANDF_D_5 923 +MX53_PAD_PATA_DATA5__ESDHC4_DAT5 924 +MX53_PAD_PATA_DATA5__GPU3d_GPU_DEBUG_OUT_5 925 +MX53_PAD_PATA_DATA5__IPU_DIAG_BUS_5 926 +MX53_PAD_PATA_DATA6__PATA_DATA_6 927 +MX53_PAD_PATA_DATA6__GPIO2_6 928 +MX53_PAD_PATA_DATA6__EMI_NANDF_D_6 929 +MX53_PAD_PATA_DATA6__ESDHC4_DAT6 930 +MX53_PAD_PATA_DATA6__GPU3d_GPU_DEBUG_OUT_6 931 +MX53_PAD_PATA_DATA6__IPU_DIAG_BUS_6 932 +MX53_PAD_PATA_DATA7__PATA_DATA_7 933 +MX53_PAD_PATA_DATA7__GPIO2_7 934 +MX53_PAD_PATA_DATA7__EMI_NANDF_D_7 935 +MX53_PAD_PATA_DATA7__ESDHC4_DAT7 936 +MX53_PAD_PATA_DATA7__GPU3d_GPU_DEBUG_OUT_7 937 +MX53_PAD_PATA_DATA7__IPU_DIAG_BUS_7 938 +MX53_PAD_PATA_DATA8__PATA_DATA_8 939 +MX53_PAD_PATA_DATA8__GPIO2_8 940 +MX53_PAD_PATA_DATA8__ESDHC1_DAT4 941 +MX53_PAD_PATA_DATA8__EMI_NANDF_D_8 942 +MX53_PAD_PATA_DATA8__ESDHC3_DAT0 943 +MX53_PAD_PATA_DATA8__GPU3d_GPU_DEBUG_OUT_8 944 +MX53_PAD_PATA_DATA8__IPU_DIAG_BUS_8 945 +MX53_PAD_PATA_DATA9__PATA_DATA_9 946 +MX53_PAD_PATA_DATA9__GPIO2_9 947 +MX53_PAD_PATA_DATA9__ESDHC1_DAT5 948 +MX53_PAD_PATA_DATA9__EMI_NANDF_D_9 949 +MX53_PAD_PATA_DATA9__ESDHC3_DAT1 950 +MX53_PAD_PATA_DATA9__GPU3d_GPU_DEBUG_OUT_9 951 +MX53_PAD_PATA_DATA9__IPU_DIAG_BUS_9 952 +MX53_PAD_PATA_DATA10__PATA_DATA_10 953 +MX53_PAD_PATA_DATA10__GPIO2_10 954 +MX53_PAD_PATA_DATA10__ESDHC1_DAT6 955 +MX53_PAD_PATA_DATA10__EMI_NANDF_D_10 956 +MX53_PAD_PATA_DATA10__ESDHC3_DAT2 957 +MX53_PAD_PATA_DATA10__GPU3d_GPU_DEBUG_OUT_10 958 +MX53_PAD_PATA_DATA10__IPU_DIAG_BUS_10 959 +MX53_PAD_PATA_DATA11__PATA_DATA_11 960 +MX53_PAD_PATA_DATA11__GPIO2_11 961 +MX53_PAD_PATA_DATA11__ESDHC1_DAT7 962 +MX53_PAD_PATA_DATA11__EMI_NANDF_D_11 963 +MX53_PAD_PATA_DATA11__ESDHC3_DAT3 964 +MX53_PAD_PATA_DATA11__GPU3d_GPU_DEBUG_OUT_11 965 +MX53_PAD_PATA_DATA11__IPU_DIAG_BUS_11 966 +MX53_PAD_PATA_DATA12__PATA_DATA_12 967 +MX53_PAD_PATA_DATA12__GPIO2_12 968 +MX53_PAD_PATA_DATA12__ESDHC2_DAT4 969 +MX53_PAD_PATA_DATA12__EMI_NANDF_D_12 970 +MX53_PAD_PATA_DATA12__ESDHC4_DAT0 971 +MX53_PAD_PATA_DATA12__GPU3d_GPU_DEBUG_OUT_12 972 +MX53_PAD_PATA_DATA12__IPU_DIAG_BUS_12 973 +MX53_PAD_PATA_DATA13__PATA_DATA_13 974 +MX53_PAD_PATA_DATA13__GPIO2_13 975 +MX53_PAD_PATA_DATA13__ESDHC2_DAT5 976 +MX53_PAD_PATA_DATA13__EMI_NANDF_D_13 977 +MX53_PAD_PATA_DATA13__ESDHC4_DAT1 978 +MX53_PAD_PATA_DATA13__GPU3d_GPU_DEBUG_OUT_13 979 +MX53_PAD_PATA_DATA13__IPU_DIAG_BUS_13 980 +MX53_PAD_PATA_DATA14__PATA_DATA_14 981 +MX53_PAD_PATA_DATA14__GPIO2_14 982 +MX53_PAD_PATA_DATA14__ESDHC2_DAT6 983 +MX53_PAD_PATA_DATA14__EMI_NANDF_D_14 984 +MX53_PAD_PATA_DATA14__ESDHC4_DAT2 985 +MX53_PAD_PATA_DATA14__GPU3d_GPU_DEBUG_OUT_14 986 +MX53_PAD_PATA_DATA14__IPU_DIAG_BUS_14 987 +MX53_PAD_PATA_DATA15__PATA_DATA_15 988 +MX53_PAD_PATA_DATA15__GPIO2_15 989 +MX53_PAD_PATA_DATA15__ESDHC2_DAT7 990 +MX53_PAD_PATA_DATA15__EMI_NANDF_D_15 991 +MX53_PAD_PATA_DATA15__ESDHC4_DAT3 992 +MX53_PAD_PATA_DATA15__GPU3d_GPU_DEBUG_OUT_15 993 +MX53_PAD_PATA_DATA15__IPU_DIAG_BUS_15 994 +MX53_PAD_SD1_DATA0__ESDHC1_DAT0 995 +MX53_PAD_SD1_DATA0__GPIO1_16 996 +MX53_PAD_SD1_DATA0__GPT_CAPIN1 997 +MX53_PAD_SD1_DATA0__CSPI_MISO 998 +MX53_PAD_SD1_DATA0__CCM_PLL3_BYP 999 +MX53_PAD_SD1_DATA1__ESDHC1_DAT1 1000 +MX53_PAD_SD1_DATA1__GPIO1_17 1001 +MX53_PAD_SD1_DATA1__GPT_CAPIN2 1002 +MX53_PAD_SD1_DATA1__CSPI_SS0 1003 +MX53_PAD_SD1_DATA1__CCM_PLL4_BYP 1004 +MX53_PAD_SD1_CMD__ESDHC1_CMD 1005 +MX53_PAD_SD1_CMD__GPIO1_18 1006 +MX53_PAD_SD1_CMD__GPT_CMPOUT1 1007 +MX53_PAD_SD1_CMD__CSPI_MOSI 1008 +MX53_PAD_SD1_CMD__CCM_PLL1_BYP 1009 +MX53_PAD_SD1_DATA2__ESDHC1_DAT2 1010 +MX53_PAD_SD1_DATA2__GPIO1_19 1011 +MX53_PAD_SD1_DATA2__GPT_CMPOUT2 1012 +MX53_PAD_SD1_DATA2__PWM2_PWMO 1013 +MX53_PAD_SD1_DATA2__WDOG1_WDOG_B 1014 +MX53_PAD_SD1_DATA2__CSPI_SS1 1015 +MX53_PAD_SD1_DATA2__WDOG1_WDOG_RST_B_DEB 1016 +MX53_PAD_SD1_DATA2__CCM_PLL2_BYP 1017 +MX53_PAD_SD1_CLK__ESDHC1_CLK 1018 +MX53_PAD_SD1_CLK__GPIO1_20 1019 +MX53_PAD_SD1_CLK__OSC32k_32K_OUT 1020 +MX53_PAD_SD1_CLK__GPT_CLKIN 1021 +MX53_PAD_SD1_CLK__CSPI_SCLK 1022 +MX53_PAD_SD1_CLK__SATA_PHY_DTB_0 1023 +MX53_PAD_SD1_DATA3__ESDHC1_DAT3 1024 +MX53_PAD_SD1_DATA3__GPIO1_21 1025 +MX53_PAD_SD1_DATA3__GPT_CMPOUT3 1026 +MX53_PAD_SD1_DATA3__PWM1_PWMO 1027 +MX53_PAD_SD1_DATA3__WDOG2_WDOG_B 1028 +MX53_PAD_SD1_DATA3__CSPI_SS2 1029 +MX53_PAD_SD1_DATA3__WDOG2_WDOG_RST_B_DEB 1030 +MX53_PAD_SD1_DATA3__SATA_PHY_DTB_1 1031 +MX53_PAD_SD2_CLK__ESDHC2_CLK 1032 +MX53_PAD_SD2_CLK__GPIO1_10 1033 +MX53_PAD_SD2_CLK__KPP_COL_5 1034 +MX53_PAD_SD2_CLK__AUDMUX_AUD4_RXFS 1035 +MX53_PAD_SD2_CLK__CSPI_SCLK 1036 +MX53_PAD_SD2_CLK__SCC_RANDOM_V 1037 +MX53_PAD_SD2_CMD__ESDHC2_CMD 1038 +MX53_PAD_SD2_CMD__GPIO1_11 1039 +MX53_PAD_SD2_CMD__KPP_ROW_5 1040 +MX53_PAD_SD2_CMD__AUDMUX_AUD4_RXC 1041 +MX53_PAD_SD2_CMD__CSPI_MOSI 1042 +MX53_PAD_SD2_CMD__SCC_RANDOM 1043 +MX53_PAD_SD2_DATA3__ESDHC2_DAT3 1044 +MX53_PAD_SD2_DATA3__GPIO1_12 1045 +MX53_PAD_SD2_DATA3__KPP_COL_6 1046 +MX53_PAD_SD2_DATA3__AUDMUX_AUD4_TXC 1047 +MX53_PAD_SD2_DATA3__CSPI_SS2 1048 +MX53_PAD_SD2_DATA3__SJC_DONE 1049 +MX53_PAD_SD2_DATA2__ESDHC2_DAT2 1050 +MX53_PAD_SD2_DATA2__GPIO1_13 1051 +MX53_PAD_SD2_DATA2__KPP_ROW_6 1052 +MX53_PAD_SD2_DATA2__AUDMUX_AUD4_TXD 1053 +MX53_PAD_SD2_DATA2__CSPI_SS1 1054 +MX53_PAD_SD2_DATA2__SJC_FAIL 1055 +MX53_PAD_SD2_DATA1__ESDHC2_DAT1 1056 +MX53_PAD_SD2_DATA1__GPIO1_14 1057 +MX53_PAD_SD2_DATA1__KPP_COL_7 1058 +MX53_PAD_SD2_DATA1__AUDMUX_AUD4_TXFS 1059 +MX53_PAD_SD2_DATA1__CSPI_SS0 1060 +MX53_PAD_SD2_DATA1__RTIC_SEC_VIO 1061 +MX53_PAD_SD2_DATA0__ESDHC2_DAT0 1062 +MX53_PAD_SD2_DATA0__GPIO1_15 1063 +MX53_PAD_SD2_DATA0__KPP_ROW_7 1064 +MX53_PAD_SD2_DATA0__AUDMUX_AUD4_RXD 1065 +MX53_PAD_SD2_DATA0__CSPI_MISO 1066 +MX53_PAD_SD2_DATA0__RTIC_DONE_INT 1067 +MX53_PAD_GPIO_0__CCM_CLKO 1068 +MX53_PAD_GPIO_0__GPIO1_0 1069 +MX53_PAD_GPIO_0__KPP_COL_5 1070 +MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK 1071 +MX53_PAD_GPIO_0__EPIT1_EPITO 1072 +MX53_PAD_GPIO_0__SRTC_ALARM_DEB 1073 +MX53_PAD_GPIO_0__USBOH3_USBH1_PWR 1074 +MX53_PAD_GPIO_0__CSU_TD 1075 +MX53_PAD_GPIO_1__ESAI1_SCKR 1076 +MX53_PAD_GPIO_1__GPIO1_1 1077 +MX53_PAD_GPIO_1__KPP_ROW_5 1078 +MX53_PAD_GPIO_1__CCM_SSI_EXT2_CLK 1079 +MX53_PAD_GPIO_1__PWM2_PWMO 1080 +MX53_PAD_GPIO_1__WDOG2_WDOG_B 1081 +MX53_PAD_GPIO_1__ESDHC1_CD 1082 +MX53_PAD_GPIO_1__SRC_TESTER_ACK 1083 +MX53_PAD_GPIO_9__ESAI1_FSR 1084 +MX53_PAD_GPIO_9__GPIO1_9 1085 +MX53_PAD_GPIO_9__KPP_COL_6 1086 +MX53_PAD_GPIO_9__CCM_REF_EN_B 1087 +MX53_PAD_GPIO_9__PWM1_PWMO 1088 +MX53_PAD_GPIO_9__WDOG1_WDOG_B 1089 +MX53_PAD_GPIO_9__ESDHC1_WP 1090 +MX53_PAD_GPIO_9__SCC_FAIL_STATE 1091 +MX53_PAD_GPIO_3__ESAI1_HCKR 1092 +MX53_PAD_GPIO_3__GPIO1_3 1093 +MX53_PAD_GPIO_3__I2C3_SCL 1094 +MX53_PAD_GPIO_3__DPLLIP1_TOG_EN 1095 +MX53_PAD_GPIO_3__CCM_CLKO2 1096 +MX53_PAD_GPIO_3__OBSERVE_MUX_OBSRV_INT_OUT0 1097 +MX53_PAD_GPIO_3__USBOH3_USBH1_OC 1098 +MX53_PAD_GPIO_3__MLB_MLBCLK 1099 +MX53_PAD_GPIO_6__ESAI1_SCKT 1100 +MX53_PAD_GPIO_6__GPIO1_6 1101 +MX53_PAD_GPIO_6__I2C3_SDA 1102 +MX53_PAD_GPIO_6__CCM_CCM_OUT_0 1103 +MX53_PAD_GPIO_6__CSU_CSU_INT_DEB 1104 +MX53_PAD_GPIO_6__OBSERVE_MUX_OBSRV_INT_OUT1 1105 +MX53_PAD_GPIO_6__ESDHC2_LCTL 1106 +MX53_PAD_GPIO_6__MLB_MLBSIG 1107 +MX53_PAD_GPIO_2__ESAI1_FST 1108 +MX53_PAD_GPIO_2__GPIO1_2 1109 +MX53_PAD_GPIO_2__KPP_ROW_6 1110 +MX53_PAD_GPIO_2__CCM_CCM_OUT_1 1111 +MX53_PAD_GPIO_2__CSU_CSU_ALARM_AUT_0 1112 +MX53_PAD_GPIO_2__OBSERVE_MUX_OBSRV_INT_OUT2 1113 +MX53_PAD_GPIO_2__ESDHC2_WP 1114 +MX53_PAD_GPIO_2__MLB_MLBDAT 1115 +MX53_PAD_GPIO_4__ESAI1_HCKT 1116 +MX53_PAD_GPIO_4__GPIO1_4 1117 +MX53_PAD_GPIO_4__KPP_COL_7 1118 +MX53_PAD_GPIO_4__CCM_CCM_OUT_2 1119 +MX53_PAD_GPIO_4__CSU_CSU_ALARM_AUT_1 1120 +MX53_PAD_GPIO_4__OBSERVE_MUX_OBSRV_INT_OUT3 1121 +MX53_PAD_GPIO_4__ESDHC2_CD 1122 +MX53_PAD_GPIO_4__SCC_SEC_STATE 1123 +MX53_PAD_GPIO_5__ESAI1_TX2_RX3 1124 +MX53_PAD_GPIO_5__GPIO1_5 1125 +MX53_PAD_GPIO_5__KPP_ROW_7 1126 +MX53_PAD_GPIO_5__CCM_CLKO 1127 +MX53_PAD_GPIO_5__CSU_CSU_ALARM_AUT_2 1128 +MX53_PAD_GPIO_5__OBSERVE_MUX_OBSRV_INT_OUT4 1129 +MX53_PAD_GPIO_5__I2C3_SCL 1130 +MX53_PAD_GPIO_5__CCM_PLL1_BYP 1131 +MX53_PAD_GPIO_7__ESAI1_TX4_RX1 1132 +MX53_PAD_GPIO_7__GPIO1_7 1133 +MX53_PAD_GPIO_7__EPIT1_EPITO 1134 +MX53_PAD_GPIO_7__CAN1_TXCAN 1135 +MX53_PAD_GPIO_7__UART2_TXD_MUX 1136 +MX53_PAD_GPIO_7__FIRI_RXD 1137 +MX53_PAD_GPIO_7__SPDIF_PLOCK 1138 +MX53_PAD_GPIO_7__CCM_PLL2_BYP 1139 +MX53_PAD_GPIO_8__ESAI1_TX5_RX0 1140 +MX53_PAD_GPIO_8__GPIO1_8 1141 +MX53_PAD_GPIO_8__EPIT2_EPITO 1142 +MX53_PAD_GPIO_8__CAN1_RXCAN 1143 +MX53_PAD_GPIO_8__UART2_RXD_MUX 1144 +MX53_PAD_GPIO_8__FIRI_TXD 1145 +MX53_PAD_GPIO_8__SPDIF_SRCLK 1146 +MX53_PAD_GPIO_8__CCM_PLL3_BYP 1147 +MX53_PAD_GPIO_16__ESAI1_TX3_RX2 1148 +MX53_PAD_GPIO_16__GPIO7_11 1149 +MX53_PAD_GPIO_16__TZIC_PWRFAIL_INT 1150 +MX53_PAD_GPIO_16__RTC_CE_RTC_EXT_TRIG1 1151 +MX53_PAD_GPIO_16__SPDIF_IN1 1152 +MX53_PAD_GPIO_16__I2C3_SDA 1153 +MX53_PAD_GPIO_16__SJC_DE_B 1154 +MX53_PAD_GPIO_17__ESAI1_TX0 1155 +MX53_PAD_GPIO_17__GPIO7_12 1156 +MX53_PAD_GPIO_17__SDMA_EXT_EVENT_0 1157 +MX53_PAD_GPIO_17__GPC_PMIC_RDY 1158 +MX53_PAD_GPIO_17__RTC_CE_RTC_FSV_TRIG 1159 +MX53_PAD_GPIO_17__SPDIF_OUT1 1160 +MX53_PAD_GPIO_17__IPU_SNOOP2 1161 +MX53_PAD_GPIO_17__SJC_JTAG_ACT 1162 +MX53_PAD_GPIO_18__ESAI1_TX1 1163 +MX53_PAD_GPIO_18__GPIO7_13 1164 +MX53_PAD_GPIO_18__SDMA_EXT_EVENT_1 1165 +MX53_PAD_GPIO_18__OWIRE_LINE 1166 +MX53_PAD_GPIO_18__RTC_CE_RTC_ALARM2_TRIG 1167 +MX53_PAD_GPIO_18__CCM_ASRC_EXT_CLK 1168 +MX53_PAD_GPIO_18__ESDHC1_LCTL 1169 +MX53_PAD_GPIO_18__SRC_SYSTEM_RST 1170 diff --git a/Documentation/devicetree/bindings/regulator/fixed-regulator.txt b/Documentation/devicetree/bindings/regulator/fixed-regulator.txt index 9cf57fd042d2..2f5b6b1ba15f 100644 --- a/Documentation/devicetree/bindings/regulator/fixed-regulator.txt +++ b/Documentation/devicetree/bindings/regulator/fixed-regulator.txt @@ -8,6 +8,8 @@ Optional properties: - startup-delay-us: startup time in microseconds - enable-active-high: Polarity of GPIO is Active high If this property is missing, the default assumed is Active low. +- gpio-open-drain: GPIO is open drain type. + If this property is missing then default assumption is false. Any property defined as part of the core regulator binding, defined in regulator.txt, can also be used. @@ -25,5 +27,6 @@ Example: gpio = <&gpio1 16 0>; startup-delay-us = <70000>; enable-active-high; - regulator-boot-on + regulator-boot-on; + gpio-open-drain; }; diff --git a/Documentation/devicetree/bindings/regulator/tps62360-regulator.txt b/Documentation/devicetree/bindings/regulator/tps62360-regulator.txt new file mode 100644 index 000000000000..c8ca6b8f6582 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/tps62360-regulator.txt @@ -0,0 +1,44 @@ +TPS62360 Voltage regulators + +Required properties: +- compatible: Must be one of the following. + "ti,tps62360" + "ti,tps62361", + "ti,tps62362", + "ti,tps62363", +- reg: I2C slave address + +Optional properties: +- ti,enable-vout-discharge: Enable output discharge. This is boolean value. +- ti,enable-pull-down: Enable pull down. This is boolean value. +- ti,vsel0-gpio: GPIO for controlling VSEL0 line. + If this property is missing, then assume that there is no GPIO + for vsel0 control. +- ti,vsel1-gpio: Gpio for controlling VSEL1 line. + If this property is missing, then assume that there is no GPIO + for vsel1 control. +- ti,vsel0-state-high: Inital state of vsel0 input is high. + If this property is missing, then assume the state as low (0). +- ti,vsel1-state-high: Inital state of vsel1 input is high. + If this property is missing, then assume the state as low (0). + +Any property defined as part of the core regulator binding, defined in +regulator.txt, can also be used. + +Example: + + abc: tps62360 { + compatible = "ti,tps62361"; + reg = <0x60>; + regulator-name = "tps62361-vout"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1500000>; + regulator-boot-on + ti,vsel0-gpio = <&gpio1 16 0>; + ti,vsel1-gpio = <&gpio1 17 0>; + ti,vsel0-state-high; + ti,vsel1-state-high; + ti,enable-pull-down; + ti,enable-force-pwm; + ti,enable-vout-discharge; + }; diff --git a/Documentation/devicetree/bindings/regulator/tps6586x.txt b/Documentation/devicetree/bindings/regulator/tps6586x.txt new file mode 100644 index 000000000000..0fcabaa3baa3 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/tps6586x.txt @@ -0,0 +1,97 @@ +TPS6586x family of regulators + +Required properties: +- compatible: "ti,tps6586x" +- reg: I2C slave address +- interrupts: the interrupt outputs of the controller +- #gpio-cells: number of cells to describe a GPIO +- gpio-controller: mark the device as a GPIO controller +- regulators: list of regulators provided by this controller, must be named + after their hardware counterparts: sm[0-2], ldo[0-9] and ldo_rtc + +Each regulator is defined using the standard binding for regulators. + +Example: + + pmu: tps6586x@34 { + compatible = "ti,tps6586x"; + reg = <0x34>; + interrupts = <0 88 0x4>; + + #gpio-cells = <2>; + gpio-controller; + + regulators { + sm0_reg: sm0 { + regulator-min-microvolt = < 725000>; + regulator-max-microvolt = <1500000>; + regulator-boot-on; + regulator-always-on; + }; + + sm1_reg: sm1 { + regulator-min-microvolt = < 725000>; + regulator-max-microvolt = <1500000>; + regulator-boot-on; + regulator-always-on; + }; + + sm2_reg: sm2 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <4550000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo0_reg: ldo0 { + regulator-name = "PCIE CLK"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + ldo1_reg: ldo1 { + regulator-min-microvolt = < 725000>; + regulator-max-microvolt = <1500000>; + }; + + ldo2_reg: ldo2 { + regulator-min-microvolt = < 725000>; + regulator-max-microvolt = <1500000>; + }; + + ldo3_reg: ldo3 { + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <3300000>; + }; + + ldo4_reg: ldo4 { + regulator-min-microvolt = <1700000>; + regulator-max-microvolt = <2475000>; + }; + + ldo5_reg: ldo5 { + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <3300000>; + }; + + ldo6_reg: ldo6 { + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <3300000>; + }; + + ldo7_reg: ldo7 { + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <3300000>; + }; + + ldo8_reg: ldo8 { + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <3300000>; + }; + + ldo9_reg: ldo9 { + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <3300000>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/sound/imx-audio-sgtl5000.txt b/Documentation/devicetree/bindings/sound/imx-audio-sgtl5000.txt new file mode 100644 index 000000000000..e4acdd891e49 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/imx-audio-sgtl5000.txt @@ -0,0 +1,49 @@ +Freescale i.MX audio complex with SGTL5000 codec + +Required properties: +- compatible : "fsl,imx-audio-sgtl5000" +- model : The user-visible name of this sound complex +- ssi-controller : The phandle of the i.MX SSI controller +- audio-codec : The phandle of the SGTL5000 audio codec +- audio-routing : A list of the connections between audio components. + Each entry is a pair of strings, the first being the connection's sink, + the second being the connection's source. Valid names could be power + supplies, SGTL5000 pins, and the jacks on the board: + + Power supplies: + * Mic Bias + + SGTL5000 pins: + * MIC_IN + * LINE_IN + * HP_OUT + * LINE_OUT + + Board connectors: + * Mic Jack + * Line In Jack + * Headphone Jack + * Line Out Jack + * Ext Spk + +- mux-int-port : The internal port of the i.MX audio muxer (AUDMUX) +- mux-ext-port : The external port of the i.MX audio muxer + +Note: The AUDMUX port numbering should start at 1, which is consistent with +hardware manual. + +Example: + +sound { + compatible = "fsl,imx51-babbage-sgtl5000", + "fsl,imx-audio-sgtl5000"; + model = "imx51-babbage-sgtl5000"; + ssi-controller = <&ssi1>; + audio-codec = <&sgtl5000>; + audio-routing = + "MIC_IN", "Mic Jack", + "Mic Jack", "Mic Bias", + "Headphone Jack", "HP_OUT"; + mux-int-port = <1>; + mux-ext-port = <3>; +}; diff --git a/Documentation/devicetree/bindings/sound/mxs-audio-sgtl5000.txt b/Documentation/devicetree/bindings/sound/mxs-audio-sgtl5000.txt new file mode 100644 index 000000000000..601c518eddaa --- /dev/null +++ b/Documentation/devicetree/bindings/sound/mxs-audio-sgtl5000.txt @@ -0,0 +1,17 @@ +* Freescale MXS audio complex with SGTL5000 codec + +Required properties: +- compatible: "fsl,mxs-audio-sgtl5000" +- model: The user-visible name of this sound complex +- saif-controllers: The phandle list of the MXS SAIF controller +- audio-codec: The phandle of the SGTL5000 audio codec + +Example: + +sound { + compatible = "fsl,imx28-evk-sgtl5000", + "fsl,mxs-audio-sgtl5000"; + model = "imx28-evk-sgtl5000"; + saif-controllers = <&saif0 &saif1>; + audio-codec = <&sgtl5000>; +}; diff --git a/Documentation/devicetree/bindings/sound/mxs-saif.txt b/Documentation/devicetree/bindings/sound/mxs-saif.txt new file mode 100644 index 000000000000..c37ba6143d9b --- /dev/null +++ b/Documentation/devicetree/bindings/sound/mxs-saif.txt @@ -0,0 +1,36 @@ +* Freescale MXS Serial Audio Interface (SAIF) + +Required properties: +- compatible: Should be "fsl,<chip>-saif" +- reg: Should contain registers location and length +- interrupts: Should contain ERROR and DMA interrupts +- fsl,saif-dma-channel: APBX DMA channel for the SAIF + +Optional properties: +- fsl,saif-master: phandle to the master SAIF. It's only required for + the slave SAIF. + +Note: Each SAIF controller should have an alias correctly numbered +in "aliases" node. + +Example: + +aliases { + saif0 = &saif0; + saif1 = &saif1; +}; + +saif0: saif@80042000 { + compatible = "fsl,imx28-saif"; + reg = <0x80042000 2000>; + interrupts = <59 80>; + fsl,saif-dma-channel = <4>; +}; + +saif1: saif@80046000 { + compatible = "fsl,imx28-saif"; + reg = <0x80046000 2000>; + interrupts = <58 81>; + fsl,saif-dma-channel = <5>; + fsl,saif-master = <&saif0>; +}; diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra30-ahub.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra30-ahub.txt new file mode 100644 index 000000000000..1ac7b1642186 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra30-ahub.txt @@ -0,0 +1,32 @@ +NVIDIA Tegra30 AHUB (Audio Hub) + +Required properties: +- compatible : "nvidia,tegra30-ahub" +- reg : Should contain the register physical address and length for each of + the AHUB's APBIF registers and the AHUB's own registers. +- interrupts : Should contain AHUB interrupt +- nvidia,dma-request-selector : The Tegra DMA controller's phandle and + request selector for the first APBIF channel. +- ranges : The bus address mapping for the configlink register bus. + Can be empty since the mapping is 1:1. +- #address-cells : For the configlink bus. Should be <1>; +- #size-cells : For the configlink bus. Should be <1>. + +AHUB client modules need to specify the IDs of their CIFs (Client InterFaces). +For RX CIFs, the numbers indicate the register number within AHUB routing +register space (APBIF 0..3 RX, I2S 0..5 RX, DAM 0..2 RX 0..1, SPDIF RX 0..1). +For TX CIFs, the numbers indicate the bit position within the AHUB routing +registers (APBIF 0..3 TX, I2S 0..5 TX, DAM 0..2 TX, SPDIF TX 0..1). + +Example: + +ahub@70080000 { + compatible = "nvidia,tegra30-ahub"; + reg = <0x70080000 0x200 0x70080200 0x100>; + interrupts = < 0 103 0x04 >; + nvidia,dma-request-selector = <&apbdma 1>; + + ranges; + #address-cells = <1>; + #size-cells = <1>; +}; diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra30-i2s.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra30-i2s.txt new file mode 100644 index 000000000000..dfa6c037124a --- /dev/null +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra30-i2s.txt @@ -0,0 +1,15 @@ +NVIDIA Tegra30 I2S controller + +Required properties: +- compatible : "nvidia,tegra30-i2s" +- reg : Should contain I2S registers location and length +- nvidia,ahub-cif-ids : The list of AHUB CIF IDs for this port, rx (playback) + first, tx (capture) second. See nvidia,tegra30-ahub.txt for values. + +Example: + +i2s@70002800 { + compatible = "nvidia,tegra30-i2s"; + reg = <0x70080300 0x100>; + nvidia,ahub-cif-ids = <4 4>; +}; diff --git a/Documentation/devicetree/bindings/sound/omap-dmic.txt b/Documentation/devicetree/bindings/sound/omap-dmic.txt new file mode 100644 index 000000000000..fd8105f18978 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/omap-dmic.txt @@ -0,0 +1,21 @@ +* Texas Instruments OMAP4+ Digital Microphone Module + +Required properties: +- compatible: "ti,omap4-dmic" +- reg: Register location and size as an array: + <MPU access base address, size>, + <L3 interconnect address, size>; +- interrupts: Interrupt number for DMIC +- interrupt-parent: The parent interrupt controller +- ti,hwmods: Name of the hwmod associated with OMAP dmic IP + +Example: + +dmic: dmic@4012e000 { + compatible = "ti,omap4-dmic"; + reg = <0x4012e000 0x7f>, /* MPU private access */ + <0x4902e000 0x7f>; /* L3 Interconnect */ + interrupts = <0 114 0x4>; + interrupt-parent = <&gic>; + ti,hwmods = "dmic"; +}; diff --git a/Documentation/devicetree/bindings/sound/omap-mcpdm.txt b/Documentation/devicetree/bindings/sound/omap-mcpdm.txt new file mode 100644 index 000000000000..0741dff048dd --- /dev/null +++ b/Documentation/devicetree/bindings/sound/omap-mcpdm.txt @@ -0,0 +1,21 @@ +* Texas Instruments OMAP4+ McPDM + +Required properties: +- compatible: "ti,omap4-mcpdm" +- reg: Register location and size as an array: + <MPU access base address, size>, + <L3 interconnect address, size>; +- interrupts: Interrupt number for McPDM +- interrupt-parent: The parent interrupt controller +- ti,hwmods: Name of the hwmod associated to the McPDM + +Example: + +mcpdm: mcpdm@40132000 { + compatible = "ti,omap4-mcpdm"; + reg = <0x40132000 0x7f>, /* MPU private access */ + <0x49032000 0x7f>; /* L3 Interconnect */ + interrupts = <0 112 0x4>; + interrupt-parent = <&gic>; + ti,hwmods = "mcpdm"; +}; diff --git a/Documentation/devicetree/bindings/sound/tegra-audio-trimslice.txt b/Documentation/devicetree/bindings/sound/tegra-audio-trimslice.txt new file mode 100644 index 000000000000..04b14cfb1f16 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/tegra-audio-trimslice.txt @@ -0,0 +1,14 @@ +NVIDIA Tegra audio complex for TrimSlice + +Required properties: +- compatible : "nvidia,tegra-audio-trimslice" +- nvidia,i2s-controller : The phandle of the Tegra I2S1 controller +- nvidia,audio-codec : The phandle of the WM8903 audio codec + +Example: + +sound { + compatible = "nvidia,tegra-audio-trimslice"; + nvidia,i2s-controller = <&tegra_i2s1>; + nvidia,audio-codec = <&codec>; +}; diff --git a/Documentation/devicetree/bindings/sound/tegra-audio-wm8753.txt b/Documentation/devicetree/bindings/sound/tegra-audio-wm8753.txt new file mode 100644 index 000000000000..c4dd39ce6165 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/tegra-audio-wm8753.txt @@ -0,0 +1,54 @@ +NVIDIA Tegra audio complex + +Required properties: +- compatible : "nvidia,tegra-audio-wm8753" +- nvidia,model : The user-visible name of this sound complex. +- nvidia,audio-routing : A list of the connections between audio components. + Each entry is a pair of strings, the first being the connection's sink, + the second being the connection's source. Valid names for sources and + sinks are the WM8753's pins, and the jacks on the board: + + WM8753 pins: + + * LOUT1 + * LOUT2 + * ROUT1 + * ROUT2 + * MONO1 + * MONO2 + * OUT3 + * OUT4 + * LINE1 + * LINE2 + * RXP + * RXN + * ACIN + * ACOP + * MIC1N + * MIC1 + * MIC2N + * MIC2 + * Mic Bias + + Board connectors: + + * Headphone Jack + * Mic Jack + +- nvidia,i2s-controller : The phandle of the Tegra I2S1 controller +- nvidia,audio-codec : The phandle of the WM8753 audio codec +Example: + +sound { + compatible = "nvidia,tegra-audio-wm8753-whistler", + "nvidia,tegra-audio-wm8753" + nvidia,model = "tegra-wm8753-harmony"; + + nvidia,audio-routing = + "Headphone Jack", "LOUT1", + "Headphone Jack", "ROUT1"; + + nvidia,i2s-controller = <&i2s1>; + nvidia,audio-codec = <&wm8753>; +}; + diff --git a/Documentation/devicetree/bindings/staging/iio/adc/lpc32xx-adc.txt b/Documentation/devicetree/bindings/staging/iio/adc/lpc32xx-adc.txt new file mode 100644 index 000000000000..b3629d3a9adf --- /dev/null +++ b/Documentation/devicetree/bindings/staging/iio/adc/lpc32xx-adc.txt @@ -0,0 +1,16 @@ +* NXP LPC32xx SoC ADC controller + +Required properties: +- compatible: must be "nxp,lpc3220-adc" +- reg: physical base address of the controller and length of memory mapped + region. +- interrupts: The ADC interrupt + +Example: + + adc@40048000 { + compatible = "nxp,lpc3220-adc"; + reg = <0x40048000 0x1000>; + interrupt-parent = <&mic>; + interrupts = <39 0>; + }; diff --git a/Documentation/devicetree/bindings/staging/iio/adc/spear-adc.txt b/Documentation/devicetree/bindings/staging/iio/adc/spear-adc.txt new file mode 100644 index 000000000000..02ea23a63f20 --- /dev/null +++ b/Documentation/devicetree/bindings/staging/iio/adc/spear-adc.txt @@ -0,0 +1,26 @@ +* ST SPEAr ADC device driver + +Required properties: +- compatible: Should be "st,spear600-adc" +- reg: Address and length of the register set for the device +- interrupt-parent: Should be the phandle for the interrupt controller + that services interrupts for this device +- interrupts: Should contain the ADC interrupt +- sampling-frequency: Default sampling frequency + +Optional properties: +- vref-external: External voltage reference in milli-volts. If omitted + the internal voltage reference will be used. +- average-samples: Number of samples to generate an average value. If + omitted, single data conversion will be used. + +Examples: + + adc: adc@d8200000 { + compatible = "st,spear600-adc"; + reg = <0xd8200000 0x1000>; + interrupt-parent = <&vic1>; + interrupts = <6>; + sampling-frequency = <5000000>; + vref-external = <2500>; /* 2.5V VRef */ + }; diff --git a/Documentation/devicetree/bindings/tty/serial/fsl-imx-uart.txt b/Documentation/devicetree/bindings/tty/serial/fsl-imx-uart.txt index a9c0406280e8..b462d0c54823 100644 --- a/Documentation/devicetree/bindings/tty/serial/fsl-imx-uart.txt +++ b/Documentation/devicetree/bindings/tty/serial/fsl-imx-uart.txt @@ -11,7 +11,7 @@ Optional properties: Example: -uart@73fbc000 { +serial@73fbc000 { compatible = "fsl,imx51-uart", "fsl,imx21-uart"; reg = <0x73fbc000 0x4000>; interrupts = <31>; diff --git a/Documentation/devicetree/bindings/usb/isp1301.txt b/Documentation/devicetree/bindings/usb/isp1301.txt new file mode 100644 index 000000000000..5405d99d9aaa --- /dev/null +++ b/Documentation/devicetree/bindings/usb/isp1301.txt @@ -0,0 +1,25 @@ +* NXP ISP1301 USB transceiver + +Required properties: +- compatible: must be "nxp,isp1301" +- reg: I2C address of the ISP1301 device + +Optional properties of devices using ISP1301: +- transceiver: phandle of isp1301 - this helps the ISP1301 driver to find the + ISP1301 instance associated with the respective USB driver + +Example: + + isp1301: usb-transceiver@2c { + compatible = "nxp,isp1301"; + reg = <0x2c>; + }; + + usbd@31020000 { + compatible = "nxp,lpc3220-udc"; + reg = <0x31020000 0x300>; + interrupt-parent = <&mic>; + interrupts = <0x3d 0>, <0x3e 0>, <0x3c 0>, <0x3a 0>; + transceiver = <&isp1301>; + status = "okay"; + }; diff --git a/Documentation/devicetree/bindings/usb/lpc32xx-udc.txt b/Documentation/devicetree/bindings/usb/lpc32xx-udc.txt new file mode 100644 index 000000000000..29f12a533f66 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/lpc32xx-udc.txt @@ -0,0 +1,28 @@ +* NXP LPC32xx SoC USB Device Controller (UDC) + +Required properties: +- compatible: Must be "nxp,lpc3220-udc" +- reg: Physical base address of the controller and length of memory mapped + region. +- interrupts: The USB interrupts: + * USB Device Low Priority Interrupt + * USB Device High Priority Interrupt + * USB Device DMA Interrupt + * External USB Transceiver Interrupt (OTG ATX) +- transceiver: phandle of the associated ISP1301 device - this is necessary for + the UDC controller for connecting to the USB physical layer + +Example: + + isp1301: usb-transceiver@2c { + compatible = "nxp,isp1301"; + reg = <0x2c>; + }; + + usbd@31020000 { + compatible = "nxp,lpc3220-udc"; + reg = <0x31020000 0x300>; + interrupt-parent = <&mic>; + interrupts = <0x3d 0>, <0x3e 0>, <0x3c 0>, <0x3a 0>; + transceiver = <&isp1301>; + }; diff --git a/Documentation/devicetree/bindings/usb/ohci-nxp.txt b/Documentation/devicetree/bindings/usb/ohci-nxp.txt new file mode 100644 index 000000000000..71e28c1017ed --- /dev/null +++ b/Documentation/devicetree/bindings/usb/ohci-nxp.txt @@ -0,0 +1,24 @@ +* OHCI controller, NXP ohci-nxp variant + +Required properties: +- compatible: must be "nxp,ohci-nxp" +- reg: physical base address of the controller and length of memory mapped + region. +- interrupts: The OHCI interrupt +- transceiver: phandle of the associated ISP1301 device - this is necessary for + the UDC controller for connecting to the USB physical layer + +Example (LPC32xx): + + isp1301: usb-transceiver@2c { + compatible = "nxp,isp1301"; + reg = <0x2c>; + }; + + ohci@31020000 { + compatible = "nxp,ohci-nxp"; + reg = <0x31020000 0x300>; + interrupt-parent = <&mic>; + interrupts = <0x3b 0>; + transceiver = <&isp1301>; + }; diff --git a/Documentation/devicetree/bindings/usb/spear-usb.txt b/Documentation/devicetree/bindings/usb/spear-usb.txt new file mode 100644 index 000000000000..f8a464a25653 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/spear-usb.txt @@ -0,0 +1,39 @@ +ST SPEAr SoC USB controllers: +----------------------------- + +EHCI: +----- + +Required properties: +- compatible: "st,spear600-ehci" +- interrupt-parent: Should be the phandle for the interrupt controller + that services interrupts for this device +- interrupts: Should contain the EHCI interrupt + +Example: + + ehci@e1800000 { + compatible = "st,spear600-ehci", "usb-ehci"; + reg = <0xe1800000 0x1000>; + interrupt-parent = <&vic1>; + interrupts = <27>; + }; + + +OHCI: +----- + +Required properties: +- compatible: "st,spear600-ohci" +- interrupt-parent: Should be the phandle for the interrupt controller + that services interrupts for this device +- interrupts: Should contain the OHCI interrupt + +Example: + + ohci@e1900000 { + compatible = "st,spear600-ohci", "usb-ohci"; + reg = <0xe1800000 0x1000>; + interrupt-parent = <&vic1>; + interrupts = <26>; + }; diff --git a/Documentation/devicetree/bindings/usb/tegra-usb.txt b/Documentation/devicetree/bindings/usb/tegra-usb.txt index 007005ddbe12..e9b005dc7625 100644 --- a/Documentation/devicetree/bindings/usb/tegra-usb.txt +++ b/Documentation/devicetree/bindings/usb/tegra-usb.txt @@ -12,6 +12,9 @@ Required properties : - nvidia,vbus-gpio : If present, specifies a gpio that needs to be activated for the bus to be powered. +Required properties for phy_type == ulpi: + - nvidia,phy-reset-gpio : The GPIO used to reset the PHY. + Optional properties: - dr_mode : dual role mode. Indicates the working mode for nvidia,tegra20-ehci compatible controllers. Can be "host", "peripheral", diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt index 82ac057a24a9..6eab91747a86 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.txt +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt @@ -8,11 +8,13 @@ amcc Applied Micro Circuits Corporation (APM, formally AMCC) apm Applied Micro Circuits Corporation (APM) arm ARM Ltd. atmel Atmel Corporation +bosch Bosch Sensortec GmbH cavium Cavium, Inc. chrp Common Hardware Reference Platform cortina Cortina Systems, Inc. dallas Maxim Integrated Products (formerly Dallas Semiconductor) denx Denx Software Engineering +emmicro EM Microelectronic epson Seiko Epson Corp. est ESTeem Wireless Modems fsl Freescale Semiconductor diff --git a/Documentation/devicetree/bindings/watchdog/pnx4008-wdt.txt b/Documentation/devicetree/bindings/watchdog/pnx4008-wdt.txt new file mode 100644 index 000000000000..7c7f6887c796 --- /dev/null +++ b/Documentation/devicetree/bindings/watchdog/pnx4008-wdt.txt @@ -0,0 +1,13 @@ +* NXP PNX watchdog timer + +Required properties: +- compatible: must be "nxp,pnx4008-wdt" +- reg: physical base address of the controller and length of memory mapped + region. + +Example: + + watchdog@4003C000 { + compatible = "nxp,pnx4008-wdt"; + reg = <0x4003C000 0x1000>; + }; diff --git a/Documentation/devicetree/booting-without-of.txt b/Documentation/devicetree/booting-without-of.txt index da0bfeb4253d..d4d66757354e 100644 --- a/Documentation/devicetree/booting-without-of.txt +++ b/Documentation/devicetree/booting-without-of.txt @@ -551,12 +551,13 @@ Here is an example of a simple device-tree. In this example, an "o" designates a node followed by the node unit name. Properties are presented with their name followed by their content. "content" represents an ASCII string (zero terminated) value, while <content> -represents a 32-bit hexadecimal value. The various nodes in this -example will be discussed in a later chapter. At this point, it is -only meant to give you a idea of what a device-tree looks like. I have -purposefully kept the "name" and "linux,phandle" properties which -aren't necessary in order to give you a better idea of what the tree -looks like in practice. +represents a 32-bit value, specified in decimal or hexadecimal (the +latter prefixed 0x). The various nodes in this example will be +discussed in a later chapter. At this point, it is only meant to give +you a idea of what a device-tree looks like. I have purposefully kept +the "name" and "linux,phandle" properties which aren't necessary in +order to give you a better idea of what the tree looks like in +practice. / o device-tree |- name = "device-tree" @@ -576,14 +577,14 @@ looks like in practice. | |- name = "PowerPC,970" | |- device_type = "cpu" | |- reg = <0> - | |- clock-frequency = <5f5e1000> + | |- clock-frequency = <0x5f5e1000> | |- 64-bit | |- linux,phandle = <2> | o memory@0 | |- name = "memory" | |- device_type = "memory" - | |- reg = <00000000 00000000 00000000 20000000> + | |- reg = <0x00000000 0x00000000 0x00000000 0x20000000> | |- linux,phandle = <3> | o chosen @@ -1010,8 +1011,8 @@ compatibility. #size-cells = <1>; #interrupt-cells = <2>; device_type = "soc"; - ranges = <00000000 e0000000 00100000> - reg = <e0000000 00003000>; + ranges = <0x00000000 0xe0000000 0x00100000> + reg = <0xe0000000 0x00003000>; bus-frequency = <0>; } @@ -1085,16 +1086,16 @@ supported currently at the toplevel. * terminated string */ - property2 = <1234abcd>; /* define a property containing a + property2 = <0x1234abcd>; /* define a property containing a * numerical 32-bit value (hexadecimal) */ - property3 = <12345678 12345678 deadbeef>; + property3 = <0x12345678 0x12345678 0xdeadbeef>; /* define a property containing 3 * numerical 32-bit values (cells) in * hexadecimal */ - property4 = [0a 0b 0c 0d de ea ad be ef]; + property4 = [0x0a 0x0b 0x0c 0x0d 0xde 0xea 0xad 0xbe 0xef]; /* define a property whose content is * an arbitrary array of bytes */ @@ -1350,10 +1351,10 @@ Appendix A - Sample SOC node for MPC8540 model = "TSEC"; compatible = "gianfar", "simple-bus"; reg = <0x24000 0x1000>; - local-mac-address = [ 00 E0 0C 00 73 00 ]; - interrupts = <29 2 30 2 34 2>; + local-mac-address = [ 0x00 0xE0 0x0C 0x00 0x73 0x00 ]; + interrupts = <0x29 2 0x30 2 0x34 2>; phy-handle = <&phy0>; - sleep = <&pmc 00000080>; + sleep = <&pmc 0x00000080>; ranges; mdio@24520 { @@ -1385,10 +1386,10 @@ Appendix A - Sample SOC node for MPC8540 model = "TSEC"; compatible = "gianfar"; reg = <0x25000 0x1000>; - local-mac-address = [ 00 E0 0C 00 73 01 ]; - interrupts = <13 2 14 2 18 2>; + local-mac-address = [ 0x00 0xE0 0x0C 0x00 0x73 0x01 ]; + interrupts = <0x13 2 0x14 2 0x18 2>; phy-handle = <&phy1>; - sleep = <&pmc 00000040>; + sleep = <&pmc 0x00000040>; }; ethernet@26000 { @@ -1396,17 +1397,17 @@ Appendix A - Sample SOC node for MPC8540 model = "FEC"; compatible = "gianfar"; reg = <0x26000 0x1000>; - local-mac-address = [ 00 E0 0C 00 73 02 ]; - interrupts = <41 2>; + local-mac-address = [ 0x00 0xE0 0x0C 0x00 0x73 0x02 ]; + interrupts = <0x41 2>; phy-handle = <&phy3>; - sleep = <&pmc 00000020>; + sleep = <&pmc 0x00000020>; }; serial@4500 { #address-cells = <1>; #size-cells = <1>; compatible = "fsl,mpc8540-duart", "simple-bus"; - sleep = <&pmc 00000002>; + sleep = <&pmc 0x00000002>; ranges; serial@4500 { @@ -1414,7 +1415,7 @@ Appendix A - Sample SOC node for MPC8540 compatible = "ns16550"; reg = <0x4500 0x100>; clock-frequency = <0>; - interrupts = <42 2>; + interrupts = <0x42 2>; }; serial@4600 { @@ -1422,7 +1423,7 @@ Appendix A - Sample SOC node for MPC8540 compatible = "ns16550"; reg = <0x4600 0x100>; clock-frequency = <0>; - interrupts = <42 2>; + interrupts = <0x42 2>; }; }; @@ -1436,11 +1437,11 @@ Appendix A - Sample SOC node for MPC8540 }; i2c@3000 { - interrupts = <43 2>; + interrupts = <0x43 2>; reg = <0x3000 0x100>; compatible = "fsl-i2c"; dfsrr; - sleep = <&pmc 00000004>; + sleep = <&pmc 0x00000004>; }; pmc: power@e0070 { |