soc: s3c: remove pm-debug hack

CONFIG_SAMSUNG_PM_DEBUG was only used on s3c24xx because of the
DEBUG_S3C24XX_UART dependency. Since s3c24xx is now gone, and nobody
ever noticed this option being missing from s3c64xx, it can be safely
removed as well.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

3 files changed, 1 insertions, 101 deletions

diff --git a/drivers/soc/samsung/Kconfig b/drivers/soc/samsung/Kconfig
index b4f538d7412f..7a8f291e7704 100644
--- a/drivers/soc/samsung/Kconfig
+++ b/drivers/soc/samsung/Kconfig
@@ -52,29 +52,9 @@ config EXYNOS_PM_DOMAINS
 	bool "Exynos PM domains" if COMPILE_TEST
 	depends on (ARCH_EXYNOS && PM_GENERIC_DOMAINS) || COMPILE_TEST
 
-config SAMSUNG_PM_DEBUG
-	bool "Samsung PM Suspend debug"
-	depends on PM && DEBUG_KERNEL
-	depends on PLAT_S3C24XX || ARCH_S3C64XX || ARCH_S5PV210
-	depends on DEBUG_S3C24XX_UART || DEBUG_S3C2410_UART
-	depends on DEBUG_LL && MMU
-	help
-	  Say Y here if you want verbose debugging from the PM Suspend and
-	  Resume code. See <file:Documentation/arm/samsung-s3c24xx/suspend.rst>
-	  for more information.
-
-config S3C_PM_DEBUG_LED_SMDK
-       bool "SMDK LED suspend/resume debugging"
-       depends on PM && (MACH_SMDK6410)
-       help
-         Say Y here to enable the use of the SMDK LEDs on the baseboard
-	 for debugging of the state of the suspend and resume process.
-
-	 Note, this currently only works for S3C64XX based SMDK boards.
-
 config SAMSUNG_PM_CHECK
 	bool "S3C2410 PM Suspend Memory CRC"
-	depends on PM && (PLAT_S3C24XX || ARCH_S3C64XX || ARCH_S5PV210)
+	depends on PM && (ARCH_S3C64XX || ARCH_S5PV210)
 	select CRC32
 	help
 	  Enable the PM code's memory area checksum over sleep. This option
diff --git a/drivers/soc/samsung/Makefile b/drivers/soc/samsung/Makefile
index 9f59d1905ab0..d35270fc6b2b 100644
--- a/drivers/soc/samsung/Makefile
+++ b/drivers/soc/samsung/Makefile
@@ -14,4 +14,3 @@ obj-$(CONFIG_EXYNOS_PM_DOMAINS) += pm_domains.o
 obj-$(CONFIG_EXYNOS_REGULATOR_COUPLER) += exynos-regulator-coupler.o
 
 obj-$(CONFIG_SAMSUNG_PM_CHECK)	+= s3c-pm-check.o
-obj-$(CONFIG_SAMSUNG_PM_DEBUG)	+= s3c-pm-debug.o
diff --git a/drivers/soc/samsung/s3c-pm-debug.c b/drivers/soc/samsung/s3c-pm-debug.c
deleted file mode 100644
index b5ce0e9a41e5..000000000000
--- a/drivers/soc/samsung/s3c-pm-debug.c
+++ /dev/null
@@ -1,79 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright (C) 2013 Samsung Electronics Co., Ltd.
-//	Tomasz Figa <t.figa@samsung.com>
-// Copyright (C) 2008 Openmoko, Inc.
-// Copyright (C) 2004-2008 Simtec Electronics
-//	Ben Dooks <ben@simtec.co.uk>
-//	http://armlinux.simtec.co.uk/
-//
-// Samsung common power management (suspend to RAM) debug support
-
-#include <linux/serial_core.h>
-#include <linux/serial_s3c.h>
-#include <linux/io.h>
-
-#include <asm/mach/map.h>
-
-#include <linux/soc/samsung/s3c-pm.h>
-
-static struct pm_uart_save uart_save;
-
-extern void printascii(const char *);
-
-void s3c_pm_dbg(const char *fmt, ...)
-{
-	va_list va;
-	char buff[256];
-
-	va_start(va, fmt);
-	vsnprintf(buff, sizeof(buff), fmt, va);
-	va_end(va);
-
-	printascii(buff);
-}
-
-static inline void __iomem *s3c_pm_uart_base(void)
-{
-	unsigned long paddr;
-	unsigned long vaddr;
-
-	debug_ll_addr(&paddr, &vaddr);
-
-	return (void __iomem *)vaddr;
-}
-
-void s3c_pm_save_uarts(bool is_s3c2410)
-{
-	void __iomem *regs = s3c_pm_uart_base();
-	struct pm_uart_save *save = &uart_save;
-
-	save->ulcon = __raw_readl(regs + S3C2410_ULCON);
-	save->ucon = __raw_readl(regs + S3C2410_UCON);
-	save->ufcon = __raw_readl(regs + S3C2410_UFCON);
-	save->umcon = __raw_readl(regs + S3C2410_UMCON);
-	save->ubrdiv = __raw_readl(regs + S3C2410_UBRDIV);
-
-	if (!is_s3c2410)
-		save->udivslot = __raw_readl(regs + S3C2443_DIVSLOT);
-
-	S3C_PMDBG("UART[%p]: ULCON=%04x, UCON=%04x, UFCON=%04x, UBRDIV=%04x\n",
-		  regs, save->ulcon, save->ucon, save->ufcon, save->ubrdiv);
-}
-
-void s3c_pm_restore_uarts(bool is_s3c2410)
-{
-	void __iomem *regs = s3c_pm_uart_base();
-	struct pm_uart_save *save = &uart_save;
-
-	s3c_pm_arch_update_uart(regs, save);
-
-	__raw_writel(save->ulcon, regs + S3C2410_ULCON);
-	__raw_writel(save->ucon,  regs + S3C2410_UCON);
-	__raw_writel(save->ufcon, regs + S3C2410_UFCON);
-	__raw_writel(save->umcon, regs + S3C2410_UMCON);
-	__raw_writel(save->ubrdiv, regs + S3C2410_UBRDIV);
-
-	if (!is_s3c2410)
-		__raw_writel(save->udivslot, regs + S3C2443_DIVSLOT);
-}