diff options
| author | Daniel Kurtz <djkurtz@chromium.org> | 2018-07-16 19:07:41 -0600 |
|---|---|---|
| committer | Linus Walleij <linus.walleij@linaro.org> | 2018-07-29 22:20:15 +0200 |
| commit | 1766e4b7047acf44cdd15aaeb1d63ed76ee78492 (patch) | |
| tree | b75923554ef9e458b40f63d9a109f84f076d8865 /drivers/pinctrl/pinctrl-amd.c | |
| parent | 2e25a9cbdf8cc300baa8f5eb5130152a6c25dd0a (diff) | |
pinctrl/amd: fix gpio irq level in debugfs
According to the AMD BKDG, the GPIO ActiveLevel bits (10:9) map to:
00 Active High
01 Active Low
10 Active on both edges iff LevelTrig (bit 8) == 0
11 Reserved
The current code has a bug where it interprets 00 => Active Low, and
01 => Active High.
Fix the bug, restrict "Active on both" to just the edge trigger case, and
refactor a bit to make the logic more readable.
Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Diffstat (limited to 'drivers/pinctrl/pinctrl-amd.c')
| -rw-r--r-- | drivers/pinctrl/pinctrl-amd.c | 14 |
1 files changed, 7 insertions, 7 deletions
diff --git a/drivers/pinctrl/pinctrl-amd.c b/drivers/pinctrl/pinctrl-amd.c index 04ae139671c8..5df5e8d64c57 100644 --- a/drivers/pinctrl/pinctrl-amd.c +++ b/drivers/pinctrl/pinctrl-amd.c @@ -247,16 +247,16 @@ static void amd_gpio_dbg_show(struct seq_file *s, struct gpio_chip *gc) raw_spin_unlock_irqrestore(&gpio_dev->lock, flags); if (pin_reg & BIT(INTERRUPT_ENABLE_OFF)) { + u8 level = (pin_reg >> ACTIVE_LEVEL_OFF) & + ACTIVE_LEVEL_MASK; interrupt_enable = "interrupt is enabled|"; - if (!(pin_reg & BIT(ACTIVE_LEVEL_OFF)) && - !(pin_reg & BIT(ACTIVE_LEVEL_OFF + 1))) - active_level = "Active low|"; - else if (pin_reg & BIT(ACTIVE_LEVEL_OFF) && - !(pin_reg & BIT(ACTIVE_LEVEL_OFF + 1))) + if (level == ACTIVE_LEVEL_HIGH) active_level = "Active high|"; - else if (!(pin_reg & BIT(ACTIVE_LEVEL_OFF)) && - pin_reg & BIT(ACTIVE_LEVEL_OFF + 1)) + else if (level == ACTIVE_LEVEL_LOW) + active_level = "Active low|"; + else if (!(pin_reg & BIT(LEVEL_TRIG_OFF)) && + level == ACTIVE_LEVEL_BOTH) active_level = "Active on both|"; else active_level = "Unknown Active level|"; |