diff options
| author | Larry Finger <Larry.Finger@lwfinger.net> | 2020-05-26 10:59:08 -0500 |
|---|---|---|
| committer | Kalle Valo <kvalo@codeaurora.org> | 2020-05-29 20:13:36 +0300 |
| commit | 75d057bda1fbca6ade21378aa45db712e5f7d962 (patch) | |
| tree | 377b26323577ff98214a4a0222d565d968cac3dd /drivers/net/wireless/broadcom/b43/main.c | |
| parent | dba5a189bf6169dc3e7462df17fb2aee5ca37e90 (diff) | |
b43: Fix connection problem with WPA3
Since the driver was first introduced into the kernel, it has only
handled the ciphers associated with WEP, WPA, and WPA2. It fails with
WPA3 even though mac80211 can handle those additional ciphers in software,
b43 did not report that it could handle them. By setting MFP_CAPABLE using
ieee80211_set_hw(), the problem is fixed.
With this change, b43 will handle the ciphers it knows in hardware,
and let mac80211 handle the others in software. It is not necessary to
use the module parameter NOHWCRYPT to turn hardware encryption off.
Although this change essentially eliminates that module parameter,
I am choosing to keep it for cases where the hardware is broken,
and software encryption is required for all ciphers.
Reported-and-tested-by: Rui Salvaterra <rsalvaterra@gmail.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Stable <stable@vger.kernel.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200526155909.5807-2-Larry.Finger@lwfinger.net
Diffstat (limited to 'drivers/net/wireless/broadcom/b43/main.c')
| -rw-r--r-- | drivers/net/wireless/broadcom/b43/main.c | 2 |
1 files changed, 1 insertions, 1 deletions
diff --git a/drivers/net/wireless/broadcom/b43/main.c b/drivers/net/wireless/broadcom/b43/main.c index 39da1a4c30ac..3ad94dad2d89 100644 --- a/drivers/net/wireless/broadcom/b43/main.c +++ b/drivers/net/wireless/broadcom/b43/main.c @@ -5569,7 +5569,7 @@ static struct b43_wl *b43_wireless_init(struct b43_bus_dev *dev) /* fill hw info */ ieee80211_hw_set(hw, RX_INCLUDES_FCS); ieee80211_hw_set(hw, SIGNAL_DBM); - + ieee80211_hw_set(hw, MFP_CAPABLE); hw->wiphy->interface_modes = BIT(NL80211_IFTYPE_AP) | BIT(NL80211_IFTYPE_MESH_POINT) | |