diff options
author | Michael Grzeschik <m.grzeschik@pengutronix.de> | 2018-11-27 05:02:50 -0500 |
---|---|---|
committer | Mauro Carvalho Chehab <mchehab+samsung@kernel.org> | 2018-12-05 06:39:36 -0500 |
commit | 937bb42578c1a365f87557b6248264684b650f31 (patch) | |
tree | d7c1efa1cdfdab77e95e0981fabc357f4f2fe600 /drivers/media/i2c/mt9m111.c | |
parent | 3c437901bd83d236e4349d93bf5d3d814b8f6357 (diff) |
media: mt9m111: add support to select formats and fps for {Q,SXGA}
This patch implements the framerate selection using the skipping and
readout power-modi features. The power-modi cut the framerate by half
and each context has an independent selection bit. The same applies to
the 2x skipping feature.
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Diffstat (limited to 'drivers/media/i2c/mt9m111.c')
-rw-r--r-- | drivers/media/i2c/mt9m111.c | 165 |
1 files changed, 165 insertions, 0 deletions
diff --git a/drivers/media/i2c/mt9m111.c b/drivers/media/i2c/mt9m111.c index 9b0a3689fa98..f97fd32181ed 100644 --- a/drivers/media/i2c/mt9m111.c +++ b/drivers/media/i2c/mt9m111.c @@ -129,6 +129,8 @@ #define MT9M111_OUTFMT_SWAP_YCbCr_Cb_Cr_RGB_R_B (1 << 0) #define MT9M111_TPG_SEL_MASK GENMASK(2, 0) #define MT9M111_EFFECTS_MODE_MASK GENMASK(2, 0) +#define MT9M111_RM_PWR_MASK BIT(10) +#define MT9M111_RM_SKIP2_MASK GENMASK(3, 2) /* * Camera control register addresses (0x200..0x2ff not implemented) @@ -207,6 +209,23 @@ static const struct mt9m111_datafmt mt9m111_colour_fmts[] = { {MEDIA_BUS_FMT_SBGGR10_2X8_PADHI_LE, V4L2_COLORSPACE_SRGB}, }; +enum mt9m111_mode_id { + MT9M111_MODE_SXGA_8FPS, + MT9M111_MODE_SXGA_15FPS, + MT9M111_MODE_QSXGA_30FPS, + MT9M111_NUM_MODES, +}; + +struct mt9m111_mode_info { + unsigned int sensor_w; + unsigned int sensor_h; + unsigned int max_image_w; + unsigned int max_image_h; + unsigned int max_fps; + unsigned int reg_val; + unsigned int reg_mask; +}; + struct mt9m111 { struct v4l2_subdev subdev; struct v4l2_ctrl_handler hdl; @@ -216,6 +235,8 @@ struct mt9m111 { struct v4l2_clk *clk; unsigned int width; /* output */ unsigned int height; /* sizes */ + struct v4l2_fract frame_interval; + const struct mt9m111_mode_info *current_mode; struct mutex power_lock; /* lock to protect power_count */ int power_count; const struct mt9m111_datafmt *fmt; @@ -226,6 +247,37 @@ struct mt9m111 { #endif }; +static const struct mt9m111_mode_info mt9m111_mode_data[MT9M111_NUM_MODES] = { + [MT9M111_MODE_SXGA_8FPS] = { + .sensor_w = 1280, + .sensor_h = 1024, + .max_image_w = 1280, + .max_image_h = 1024, + .max_fps = 8, + .reg_val = MT9M111_RM_LOW_POWER_RD, + .reg_mask = MT9M111_RM_PWR_MASK | MT9M111_RM_SKIP2_MASK, + }, + [MT9M111_MODE_SXGA_15FPS] = { + .sensor_w = 1280, + .sensor_h = 1024, + .max_image_w = 1280, + .max_image_h = 1024, + .max_fps = 15, + .reg_val = MT9M111_RM_FULL_POWER_RD, + .reg_mask = MT9M111_RM_PWR_MASK | MT9M111_RM_SKIP2_MASK, + }, + [MT9M111_MODE_QSXGA_30FPS] = { + .sensor_w = 1280, + .sensor_h = 1024, + .max_image_w = 640, + .max_image_h = 512, + .max_fps = 30, + .reg_val = MT9M111_RM_LOW_POWER_RD | MT9M111_RM_COL_SKIP_2X | + MT9M111_RM_ROW_SKIP_2X, + .reg_mask = MT9M111_RM_PWR_MASK | MT9M111_RM_SKIP2_MASK, + }, +}; + /* Find a data format by a pixel code */ static const struct mt9m111_datafmt *mt9m111_find_datafmt(struct mt9m111 *mt9m111, u32 code) @@ -618,6 +670,61 @@ static int mt9m111_set_fmt(struct v4l2_subdev *sd, return ret; } +static const struct mt9m111_mode_info * +mt9m111_find_mode(struct mt9m111 *mt9m111, unsigned int req_fps, + unsigned int width, unsigned int height) +{ + const struct mt9m111_mode_info *mode; + struct v4l2_rect *sensor_rect = &mt9m111->rect; + unsigned int gap, gap_best = (unsigned int) -1; + int i, best_gap_idx = MT9M111_MODE_SXGA_15FPS; + bool skip_30fps = false; + + /* + * The fps selection is based on the row, column skipping mechanism. + * So ensure that the sensor window is set to default else the fps + * aren't calculated correctly within the sensor hw. + */ + if (sensor_rect->width != MT9M111_MAX_WIDTH || + sensor_rect->height != MT9M111_MAX_HEIGHT) { + dev_info(mt9m111->subdev.dev, + "Framerate selection is not supported for cropped " + "images\n"); + return NULL; + } + + /* 30fps only supported for images not exceeding 640x512 */ + if (width > MT9M111_MAX_WIDTH / 2 || height > MT9M111_MAX_HEIGHT / 2) { + dev_dbg(mt9m111->subdev.dev, + "Framerates > 15fps are supported only for images " + "not exceeding 640x512\n"); + skip_30fps = true; + } + + /* find best matched fps */ + for (i = 0; i < MT9M111_NUM_MODES; i++) { + unsigned int fps = mt9m111_mode_data[i].max_fps; + + if (fps == 30 && skip_30fps) + continue; + + gap = abs(fps - req_fps); + if (gap < gap_best) { + best_gap_idx = i; + gap_best = gap; + } + } + + /* + * Use context a/b default timing values instead of calculate blanking + * timing values. + */ + mode = &mt9m111_mode_data[best_gap_idx]; + mt9m111->ctx = (best_gap_idx == MT9M111_MODE_QSXGA_30FPS) ? &context_a : + &context_b; + return mode; +} + #ifdef CONFIG_VIDEO_ADV_DEBUG static int mt9m111_g_register(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg) @@ -803,11 +910,16 @@ static int mt9m111_suspend(struct mt9m111 *mt9m111) static void mt9m111_restore_state(struct mt9m111 *mt9m111) { + struct i2c_client *client = v4l2_get_subdevdata(&mt9m111->subdev); + mt9m111_set_context(mt9m111, mt9m111->ctx); mt9m111_set_pixfmt(mt9m111, mt9m111->fmt->code); mt9m111_setup_geometry(mt9m111, &mt9m111->rect, mt9m111->width, mt9m111->height, mt9m111->fmt->code); v4l2_ctrl_handler_setup(&mt9m111->hdl); + mt9m111_reg_mask(client, mt9m111->ctx->read_mode, + mt9m111->current_mode->reg_val, + mt9m111->current_mode->reg_mask); } static int mt9m111_resume(struct mt9m111 *mt9m111) @@ -903,6 +1015,53 @@ static const struct v4l2_subdev_core_ops mt9m111_subdev_core_ops = { #endif }; +static int mt9m111_g_frame_interval(struct v4l2_subdev *sd, + struct v4l2_subdev_frame_interval *fi) +{ + struct mt9m111 *mt9m111 = container_of(sd, struct mt9m111, subdev); + + fi->interval = mt9m111->frame_interval; + + return 0; +} + +static int mt9m111_s_frame_interval(struct v4l2_subdev *sd, + struct v4l2_subdev_frame_interval *fi) +{ + struct mt9m111 *mt9m111 = container_of(sd, struct mt9m111, subdev); + const struct mt9m111_mode_info *mode; + struct v4l2_fract *fract = &fi->interval; + int fps; + + if (mt9m111->is_streaming) + return -EBUSY; + + if (fi->pad != 0) + return -EINVAL; + + if (fract->numerator == 0) { + fract->denominator = 30; + fract->numerator = 1; + } + + fps = DIV_ROUND_CLOSEST(fract->denominator, fract->numerator); + + /* Find best fitting mode. Do not update the mode if no one was found. */ + mode = mt9m111_find_mode(mt9m111, fps, mt9m111->width, mt9m111->height); + if (!mode) + return 0; + + if (mode->max_fps != fps) { + fract->denominator = mode->max_fps; + fract->numerator = 1; + } + + mt9m111->current_mode = mode; + mt9m111->frame_interval = fi->interval; + + return 0; +} + static int mt9m111_enum_mbus_code(struct v4l2_subdev *sd, struct v4l2_subdev_pad_config *cfg, struct v4l2_subdev_mbus_code_enum *code) @@ -936,6 +1095,8 @@ static int mt9m111_g_mbus_config(struct v4l2_subdev *sd, static const struct v4l2_subdev_video_ops mt9m111_subdev_video_ops = { .g_mbus_config = mt9m111_g_mbus_config, .s_stream = mt9m111_s_stream, + .g_frame_interval = mt9m111_g_frame_interval, + .s_frame_interval = mt9m111_s_frame_interval, }; static const struct v4l2_subdev_pad_ops mt9m111_subdev_pad_ops = { @@ -1061,6 +1222,10 @@ static int mt9m111_probe(struct i2c_client *client, goto out_hdlfree; #endif + mt9m111->current_mode = &mt9m111_mode_data[MT9M111_MODE_SXGA_15FPS]; + mt9m111->frame_interval.numerator = 1; + mt9m111->frame_interval.denominator = mt9m111->current_mode->max_fps; + /* Second stage probe - when a capture adapter is there */ mt9m111->rect.left = MT9M111_MIN_DARK_COLS; mt9m111->rect.top = MT9M111_MIN_DARK_ROWS; |