Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from Davic Miller:

 1) Support busy polling generically, for all NAPI drivers.  From Eric
    Dumazet.

 2) Add byte/packet counter support to nft_ct, from Floriani Westphal.

 3) Add RSS/XPS support to mvneta driver, from Gregory Clement.

 4) Implement IPV6_HDRINCL socket option for raw sockets, from Hannes
    Frederic Sowa.

 5) Add support for T6 adapter to cxgb4 driver, from Hariprasad Shenai.

 6) Add support for VLAN device bridging to mlxsw switch driver, from
    Ido Schimmel.

 7) Add driver for Netronome NFP4000/NFP6000, from Jakub Kicinski.

 8) Provide hwmon interface to mlxsw switch driver, from Jiri Pirko.

 9) Reorganize wireless drivers into per-vendor directories just like we
    do for ethernet drivers.  From Kalle Valo.

10) Provide a way for administrators "destroy" connected sockets via the
    SOCK_DESTROY socket netlink diag operation.  From Lorenzo Colitti.

11) Add support to add/remove multicast routes via netlink, from Nikolay
    Aleksandrov.

12) Make TCP keepalive settings per-namespace, from Nikolay Borisov.

13) Add forwarding and packet duplication facilities to nf_tables, from
    Pablo Neira Ayuso.

14) Dead route support in MPLS, from Roopa Prabhu.

15) TSO support for thunderx chips, from Sunil Goutham.

16) Add driver for IBM's System i/p VNIC protocol, from Thomas Falcon.

17) Rationalize, consolidate, and more completely document the checksum
    offloading facilities in the networking stack.  From Tom Herbert.

18) Support aborting an ongoing scan in mac80211/cfg80211, from
    Vidyullatha Kanchanapally.

19) Use per-bucket spinlock for bpf hash facility, from Tom Leiming.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1375 commits)
  net: bnxt: always return values from _bnxt_get_max_rings
  net: bpf: reject invalid shifts
  phonet: properly unshare skbs in phonet_rcv()
  dwc_eth_qos: Fix dma address for multi-fragment skbs
  phy: remove an unneeded condition
  mdio: remove an unneed condition
  mdio_bus: NULL dereference on allocation error
  net: Fix typo in netdev_intersect_features
  net: freescale: mac-fec: Fix build error from phy_device API change
  net: freescale: ucc_geth: Fix build error from phy_device API change
  bonding: Prevent IPv6 link local address on enslaved devices
  IB/mlx5: Add flow steering support
  net/mlx5_core: Export flow steering API
  net/mlx5_core: Make ipv4/ipv6 location more clear
  net/mlx5_core: Enable flow steering support for the IB driver
  net/mlx5_core: Initialize namespaces only when supported by device
  net/mlx5_core: Set priority attributes
  net/mlx5_core: Connect flow tables
  net/mlx5_core: Introduce modify flow table command
  net/mlx5_core: Managing root flow table
  ...

19 files changed, 1 insertions, 3137 deletions

diff --git a/drivers/isdn/Makefile b/drivers/isdn/Makefile
index f1f777570e8e..91c81965e7ca 100644
--- a/drivers/isdn/Makefile
+++ b/drivers/isdn/Makefile
@@ -10,7 +10,6 @@ obj-$(CONFIG_ISDN_DIVERSION)		+= divert/
 obj-$(CONFIG_ISDN_DRV_HISAX)		+= hisax/
 obj-$(CONFIG_ISDN_DRV_ICN)		+= icn/
 obj-$(CONFIG_ISDN_DRV_PCBIT)		+= pcbit/
-obj-$(CONFIG_ISDN_DRV_SC)		+= sc/
 obj-$(CONFIG_ISDN_DRV_LOOP)		+= isdnloop/
 obj-$(CONFIG_ISDN_DRV_ACT2000)		+= act2000/
 obj-$(CONFIG_HYSDN)			+= hysdn/
diff --git a/drivers/isdn/act2000/module.c b/drivers/isdn/act2000/module.c
index c3a1b061838d..68073d0da0e3 100644
--- a/drivers/isdn/act2000/module.c
+++ b/drivers/isdn/act2000/module.c
@@ -37,7 +37,7 @@ MODULE_DESCRIPTION("ISDN4Linux: Driver for IBM Active 2000 ISDN card");
 MODULE_AUTHOR("Fritz Elfert");
 MODULE_LICENSE("GPL");
 MODULE_PARM_DESC(act_bus, "BusType of first card, 1=ISA, 2=MCA, 3=PCMCIA, currently only ISA");
-MODULE_PARM_DESC(membase, "Base port address of first card");
+MODULE_PARM_DESC(act_port, "Base port address of first card");
 MODULE_PARM_DESC(act_irq, "IRQ of first card");
 MODULE_PARM_DESC(act_id, "ID-String of first card");
 module_param(act_bus, int, 0);
diff --git a/drivers/isdn/i4l/Kconfig b/drivers/isdn/i4l/Kconfig
index 9c6650ea848e..f5b714cd7618 100644
--- a/drivers/isdn/i4l/Kconfig
+++ b/drivers/isdn/i4l/Kconfig
@@ -130,8 +130,6 @@ source "drivers/isdn/icn/Kconfig"
 
 source "drivers/isdn/pcbit/Kconfig"
 
-source "drivers/isdn/sc/Kconfig"
-
 source "drivers/isdn/act2000/Kconfig"
 
 endmenu
diff --git a/drivers/isdn/sc/Kconfig b/drivers/isdn/sc/Kconfig
deleted file mode 100644
index 7469863a7925..000000000000
--- a/drivers/isdn/sc/Kconfig
+++ /dev/null
@@ -1,8 +0,0 @@
-config ISDN_DRV_SC
-	tristate "Spellcaster support"
-	depends on ISA
-	help
-	  This enables support for the Spellcaster BRI ISDN boards.  This
-	  driver currently builds only in a modularized version.
-	  To build it, choose M here: the module will be called sc.
-	  See <file:Documentation/isdn/README.sc> for more information.
diff --git a/drivers/isdn/sc/Makefile b/drivers/isdn/sc/Makefile
deleted file mode 100644
index 0f2b7d602ac0..000000000000
--- a/drivers/isdn/sc/Makefile
+++ /dev/null
@@ -1,10 +0,0 @@
-# Makefile for the sc ISDN device driver
-
-# Each configuration option enables a list of files.
-
-obj-$(CONFIG_ISDN_DRV_SC)	+= sc.o
-
-# Multipart objects.
-
-sc-y				:= shmem.o init.o packet.o command.o event.o \
-		   		   ioctl.o interrupt.o message.o timer.o	
diff --git a/drivers/isdn/sc/card.h b/drivers/isdn/sc/card.h
deleted file mode 100644
index 3da69ee43da7..000000000000
--- a/drivers/isdn/sc/card.h
+++ /dev/null
@@ -1,131 +0,0 @@
-/* $Id: card.h,v 1.1.10.1 2001/09/23 22:24:59 kai Exp $
- *
- * Driver parameters for SpellCaster ISA ISDN adapters
- *
- * Copyright (C) 1996  SpellCaster Telecommunications Inc.
- *
- * This software may be used and distributed according to the terms
- * of the GNU General Public License, incorporated herein by reference.
- *
- * For more information, please contact gpl-info@spellcast.com or write:
- *
- *     SpellCaster Telecommunications Inc.
- *     5621 Finch Avenue East, Unit #3
- *     Scarborough, Ontario  Canada
- *     M1B 2T9
- *     +1 (416) 297-8565
- *     +1 (416) 297-6433 Facsimile
- */
-
-#ifndef CARD_H
-#define CARD_H
-
-/*
- * We need these if they're not already included
- */
-#include <linux/timer.h>
-#include <linux/time.h>
-#include <linux/isdnif.h>
-#include <linux/irqreturn.h>
-#include "message.h"
-#include "scioc.h"
-
-/*
- * Amount of time to wait for a reset to complete
- */
-#define CHECKRESET_TIME		msecs_to_jiffies(4000)
-
-/*
- * Amount of time between line status checks
- */
-#define CHECKSTAT_TIME		msecs_to_jiffies(8000)
-
-/*
- * The maximum amount of time to wait for a message response
- * to arrive. Use exclusively by send_and_receive
- */
-#define SAR_TIMEOUT		msecs_to_jiffies(10000)
-
-/*
- * Macro to determine is a card id is valid
- */
-#define IS_VALID_CARD(x)	((x >= 0) && (x <= cinst))
-
-/*
- * Per channel status and configuration
- */
-typedef struct {
-	int l2_proto;
-	int l3_proto;
-	char dn[50];
-	unsigned long first_sendbuf;	/* Offset of first send buffer */
-	unsigned int num_sendbufs;	/* Number of send buffers */
-	unsigned int free_sendbufs;	/* Number of free sendbufs */
-	unsigned int next_sendbuf;	/* Next sequential buffer */
-	char eazlist[50];		/* Set with SETEAZ */
-	char sillist[50];		/* Set with SETSIL */
-	int eazclear;			/* Don't accept calls if TRUE */
-} bchan;
-
-/*
- * Everything you want to know about the adapter ...
- */
-typedef struct {
-	int model;
-	int driverId;			/* LL Id */
-	char devicename[20];		/* The device name */
-	isdn_if *card;			/* ISDN4Linux structure */
-	bchan *channel;			/* status of the B channels */
-	char nChannels;			/* Number of channels */
-	unsigned int interrupt;		/* Interrupt number */
-	int iobase;			/* I/O Base address */
-	int ioport[MAX_IO_REGS];	/* Index to I/O ports */
-	int shmem_pgport;		/* port for the exp mem page reg. */
-	int shmem_magic;		/* adapter magic number */
-	unsigned int rambase;		/* Shared RAM base address */
-	unsigned int ramsize;		/* Size of shared memory */
-	RspMessage async_msg;		/* Async response message */
-	int want_async_messages;	/* Snoop the Q ? */
-	unsigned char seq_no;		/* Next send seq. number */
-	struct timer_list reset_timer;	/* Check reset timer */
-	struct timer_list stat_timer;	/* Check startproc timer */
-	unsigned char nphystat;		/* Latest PhyStat info */
-	unsigned char phystat;		/* Last PhyStat info */
-	HWConfig_pl hwconfig;		/* Hardware config info */
-	char load_ver[11];		/* CommManage Version string */
-	char proc_ver[11];		/* CommEngine Version */
-	int StartOnReset;		/* Indicates startproc after reset */
-	int EngineUp;			/* Indicates CommEngine Up */
-	int trace_mode;			/* Indicate if tracing is on */
-	spinlock_t lock;		/* local lock */
-} board;
-
-
-extern board *sc_adapter[];
-extern int cinst;
-
-void memcpy_toshmem(int card, void *dest, const void *src, size_t n);
-void memcpy_fromshmem(int card, void *dest, const void *src, size_t n);
-int get_card_from_id(int driver);
-int indicate_status(int card, int event, ulong Channel, char *Data);
-irqreturn_t interrupt_handler(int interrupt, void *cardptr);
-int sndpkt(int devId, int channel, int ack, struct sk_buff *data);
-void rcvpkt(int card, RspMessage *rcvmsg);
-int command(isdn_ctrl *cmd);
-int reset(int card);
-int startproc(int card);
-int send_and_receive(int card, unsigned int procid, unsigned char type,
-		     unsigned char class, unsigned char code,
-		     unsigned char link, unsigned char data_len,
-		     unsigned char *data,  RspMessage *mesgdata, int timeout);
-void flushreadfifo(int card);
-int sendmessage(int card, unsigned int procid, unsigned int type,
-		unsigned int class, unsigned int code, unsigned int link,
-		unsigned int data_len, unsigned int *data);
-int receivemessage(int card, RspMessage *rspmsg);
-int sc_ioctl(int card, scs_ioctl *data);
-int setup_buffers(int card, int c);
-void sc_check_reset(unsigned long data);
-void check_phystat(unsigned long data);
-
-#endif /* CARD_H */
diff --git a/drivers/isdn/sc/command.c b/drivers/isdn/sc/command.c
deleted file mode 100644
index 4a4e66152ce7..000000000000
--- a/drivers/isdn/sc/command.c
+++ /dev/null
@@ -1,363 +0,0 @@
-/* $Id: command.c,v 1.4.10.1 2001/09/23 22:24:59 kai Exp $
- *
- * Copyright (C) 1996  SpellCaster Telecommunications Inc.
- *
- * This software may be used and distributed according to the terms
- * of the GNU General Public License, incorporated herein by reference.
- *
- * For more information, please contact gpl-info@spellcast.com or write:
- *
- *     SpellCaster Telecommunications Inc.
- *     5621 Finch Avenue East, Unit #3
- *     Scarborough, Ontario  Canada
- *     M1B 2T9
- *     +1 (416) 297-8565
- *     +1 (416) 297-6433 Facsimile
- */
-
-#include <linux/module.h>
-#include "includes.h"		/* This must be first */
-#include "hardware.h"
-#include "message.h"
-#include "card.h"
-#include "scioc.h"
-
-static int dial(int card, unsigned long channel, setup_parm setup);
-static int hangup(int card, unsigned long channel);
-static int answer(int card, unsigned long channel);
-static int clreaz(int card, unsigned long channel);
-static int seteaz(int card, unsigned long channel, char *);
-static int setl2(int card, unsigned long arg);
-static int setl3(int card, unsigned long arg);
-static int acceptb(int card, unsigned long channel);
-
-#ifdef DEBUG
-/*
- * Translate command codes to strings
- */
-static char *commands[] = { "ISDN_CMD_IOCTL",
-			    "ISDN_CMD_DIAL",
-			    "ISDN_CMD_ACCEPTB",
-			    "ISDN_CMD_ACCEPTB",
-			    "ISDN_CMD_HANGUP",
-			    "ISDN_CMD_CLREAZ",
-			    "ISDN_CMD_SETEAZ",
-			    NULL,
-			    NULL,
-			    NULL,
-			    "ISDN_CMD_SETL2",
-			    NULL,
-			    "ISDN_CMD_SETL3",
-			    NULL,
-			    NULL,
-			    NULL,
-			    NULL,
-			    NULL, };
-
-/*
- * Translates ISDN4Linux protocol codes to strings for debug messages
- */
-static char *l3protos[] = { "ISDN_PROTO_L3_TRANS" };
-static char *l2protos[] = { "ISDN_PROTO_L2_X75I",
-			    "ISDN_PROTO_L2_X75UI",
-			    "ISDN_PROTO_L2_X75BUI",
-			    "ISDN_PROTO_L2_HDLC",
-			    "ISDN_PROTO_L2_TRANS" };
-#endif
-
-int get_card_from_id(int driver)
-{
-	int i;
-
-	for (i = 0; i < cinst; i++) {
-		if (sc_adapter[i]->driverId == driver)
-			return i;
-	}
-	return -ENODEV;
-}
-
-/*
- * command
- */
-
-int command(isdn_ctrl *cmd)
-{
-	int card;
-
-	card = get_card_from_id(cmd->driver);
-	if (!IS_VALID_CARD(card)) {
-		pr_debug("Invalid param: %d is not a valid card id\n", card);
-		return -ENODEV;
-	}
-
-	/*
-	 * Dispatch the command
-	 */
-	switch (cmd->command) {
-	case ISDN_CMD_IOCTL:
-	{
-		unsigned long	cmdptr;
-		scs_ioctl	ioc;
-
-		memcpy(&cmdptr, cmd->parm.num, sizeof(unsigned long));
-		if (copy_from_user(&ioc, (scs_ioctl __user *)cmdptr,
-				   sizeof(scs_ioctl))) {
-			pr_debug("%s: Failed to verify user space 0x%lx\n",
-				 sc_adapter[card]->devicename, cmdptr);
-			return -EFAULT;
-		}
-		return sc_ioctl(card, &ioc);
-	}
-	case ISDN_CMD_DIAL:
-		return dial(card, cmd->arg, cmd->parm.setup);
-	case ISDN_CMD_HANGUP:
-		return hangup(card, cmd->arg);
-	case ISDN_CMD_ACCEPTD:
-		return answer(card, cmd->arg);
-	case ISDN_CMD_ACCEPTB:
-		return acceptb(card, cmd->arg);
-	case ISDN_CMD_CLREAZ:
-		return clreaz(card, cmd->arg);
-	case ISDN_CMD_SETEAZ:
-		return seteaz(card, cmd->arg, cmd->parm.num);
-	case ISDN_CMD_SETL2:
-		return setl2(card, cmd->arg);
-	case ISDN_CMD_SETL3:
-		return setl3(card, cmd->arg);
-	default:
-		return -EINVAL;
-	}
-	return 0;
-}
-
-/*
- * start the onboard firmware
- */
-int startproc(int card)
-{
-	int status;
-
-	if (!IS_VALID_CARD(card)) {
-		pr_debug("Invalid param: %d is not a valid card id\n", card);
-		return -ENODEV;
-	}
-
-	/*
-	 * send start msg
-	 */
-	status = sendmessage(card, CMPID, cmReqType2,
-			     cmReqClass0,
-			     cmReqStartProc,
-			     0, 0, NULL);
-	pr_debug("%s: Sent startProc\n", sc_adapter[card]->devicename);
-
-	return status;
-}
-
-
-/*
- * Dials the number passed in
- */
-static int dial(int card, unsigned long channel, setup_parm setup)
-{
-	int status;
-	char Phone[48];
-
-	if (!IS_VALID_CARD(card)) {
-		pr_debug("Invalid param: %d is not a valid card id\n", card);
-		return -ENODEV;
-	}
-
-	/*extract ISDN number to dial from eaz/msn string*/
-	strcpy(Phone, setup.phone);
-
-	/*send the connection message*/
-	status = sendmessage(card, CEPID, ceReqTypePhy,
-			     ceReqClass1,
-			     ceReqPhyConnect,
-			     (unsigned char)channel + 1,
-			     strlen(Phone),
-			     (unsigned int *)Phone);
-
-	pr_debug("%s: Dialing %s on channel %lu\n",
-		 sc_adapter[card]->devicename, Phone, channel + 1);
-
-	return status;
-}
-
-/*
- * Answer an incoming call
- */
-static int answer(int card, unsigned long channel)
-{
-	if (!IS_VALID_CARD(card)) {
-		pr_debug("Invalid param: %d is not a valid card id\n", card);
-		return -ENODEV;
-	}
-
-	if (setup_buffers(card, channel + 1)) {
-		hangup(card, channel + 1);
-		return -ENOBUFS;
-	}
-
-	indicate_status(card, ISDN_STAT_BCONN, channel, NULL);
-	pr_debug("%s: Answered incoming call on channel %lu\n",
-		 sc_adapter[card]->devicename, channel + 1);
-	return 0;
-}
-
-/*
- * Hangup up the call on specified channel
- */
-static int hangup(int card, unsigned long channel)
-{
-	int status;
-
-	if (!IS_VALID_CARD(card)) {
-		pr_debug("Invalid param: %d is not a valid card id\n", card);
-		return -ENODEV;
-	}
-
-	status = sendmessage(card, CEPID, ceReqTypePhy,
-			     ceReqClass1,
-			     ceReqPhyDisconnect,
-			     (unsigned char)channel + 1,
-			     0,
-			     NULL);
-	pr_debug("%s: Sent HANGUP message to channel %lu\n",
-		 sc_adapter[card]->devicename, channel + 1);
-	return status;
-}
-
-/*
- * Set the layer 2 protocol (X.25, HDLC, Raw)
- */
-static int setl2(int card, unsigned long arg)
-{
-	int status = 0;
-	int protocol, channel;
-
-	if (!IS_VALID_CARD(card)) {
-		pr_debug("Invalid param: %d is not a valid card id\n", card);
-		return -ENODEV;
-	}
-	protocol = arg >> 8;
-	channel = arg & 0xff;
-	sc_adapter[card]->channel[channel].l2_proto = protocol;
-
-	/*
-	 * check that the adapter is also set to the correct protocol
-	 */
-	pr_debug("%s: Sending GetFrameFormat for channel %d\n",
-		 sc_adapter[card]->devicename, channel + 1);
-	status = sendmessage(card, CEPID, ceReqTypeCall,
-			     ceReqClass0,
-			     ceReqCallGetFrameFormat,
-			     (unsigned char)channel + 1,
-			     1,
-			     (unsigned int *)protocol);
-	if (status)
-		return status;
-	return 0;
-}
-
-/*
- * Set the layer 3 protocol
- */
-static int setl3(int card, unsigned long channel)
-{
-	int protocol = channel >> 8;
-
-	if (!IS_VALID_CARD(card)) {
-		pr_debug("Invalid param: %d is not a valid card id\n", card);
-		return -ENODEV;
-	}
-
-	sc_adapter[card]->channel[channel].l3_proto = protocol;
-	return 0;
-}
-
-static int acceptb(int card, unsigned long channel)
-{
-	if (!IS_VALID_CARD(card)) {
-		pr_debug("Invalid param: %d is not a valid card id\n", card);
-		return -ENODEV;
-	}
-
-	if (setup_buffers(card, channel + 1))
-	{
-		hangup(card, channel + 1);
-		return -ENOBUFS;
-	}
-
-	pr_debug("%s: B-Channel connection accepted on channel %lu\n",
-		 sc_adapter[card]->devicename, channel + 1);
-	indicate_status(card, ISDN_STAT_BCONN, channel, NULL);
-	return 0;
-}
-
-static int clreaz(int card, unsigned long arg)
-{
-	if (!IS_VALID_CARD(card)) {
-		pr_debug("Invalid param: %d is not a valid card id\n", card);
-		return -ENODEV;
-	}
-
-	strcpy(sc_adapter[card]->channel[arg].eazlist, "");
-	sc_adapter[card]->channel[arg].eazclear = 1;
-	pr_debug("%s: EAZ List cleared for channel %lu\n",
-		 sc_adapter[card]->devicename, arg + 1);
-	return 0;
-}
-
-static int seteaz(int card, unsigned long arg, char *num)
-{
-	if (!IS_VALID_CARD(card)) {
-		pr_debug("Invalid param: %d is not a valid card id\n", card);
-		return -ENODEV;
-	}
-
-	strcpy(sc_adapter[card]->channel[arg].eazlist, num);
-	sc_adapter[card]->channel[arg].eazclear = 0;
-	pr_debug("%s: EAZ list for channel %lu set to: %s\n",
-		 sc_adapter[card]->devicename, arg + 1,
-		 sc_adapter[card]->channel[arg].eazlist);
-	return 0;
-}
-
-int reset(int card)
-{
-	unsigned long flags;
-
-	if (!IS_VALID_CARD(card)) {
-		pr_debug("Invalid param: %d is not a valid card id\n", card);
-		return -ENODEV;
-	}
-
-	indicate_status(card, ISDN_STAT_STOP, 0, NULL);
-
-	if (sc_adapter[card]->EngineUp) {
-		del_timer(&sc_adapter[card]->stat_timer);
-	}
-
-	sc_adapter[card]->EngineUp = 0;
-
-	spin_lock_irqsave(&sc_adapter[card]->lock, flags);
-	init_timer(&sc_adapter[card]->reset_timer);
-	sc_adapter[card]->reset_timer.function = sc_check_reset;
-	sc_adapter[card]->reset_timer.data = card;
-	sc_adapter[card]->reset_timer.expires = jiffies + CHECKRESET_TIME;
-	add_timer(&sc_adapter[card]->reset_timer);
-	spin_unlock_irqrestore(&sc_adapter[card]->lock, flags);
-
-	outb(0x1, sc_adapter[card]->ioport[SFT_RESET]);
-
-	pr_debug("%s: Adapter Reset\n", sc_adapter[card]->devicename);
-	return 0;
-}
-
-void flushreadfifo(int card)
-{
-	while (inb(sc_adapter[card]->ioport[FIFO_STATUS]) & RF_HAS_DATA)
-		inb(sc_adapter[card]->ioport[FIFO_READ]);
-}
diff --git a/drivers/isdn/sc/event.c b/drivers/isdn/sc/event.c
deleted file mode 100644
index 833d96c2cf92..000000000000
--- a/drivers/isdn/sc/event.c
+++ /dev/null
@@ -1,68 +0,0 @@
-/* $Id: event.c,v 1.4.8.1 2001/09/23 22:24:59 kai Exp $
- *
- * Copyright (C) 1996  SpellCaster Telecommunications Inc.
- *
- * This software may be used and distributed according to the terms
- * of the GNU General Public License, incorporated herein by reference.
- *
- * For more information, please contact gpl-info@spellcast.com or write:
- *
- *     SpellCaster Telecommunications Inc.
- *     5621 Finch Avenue East, Unit #3
- *     Scarborough, Ontario  Canada
- *     M1B 2T9
- *     +1 (416) 297-8565
- *     +1 (416) 297-6433 Facsimile
- */
-
-#include "includes.h"
-#include "hardware.h"
-#include "message.h"
-#include "card.h"
-
-#ifdef DEBUG
-static char *events[] = { "ISDN_STAT_STAVAIL",
-			  "ISDN_STAT_ICALL",
-			  "ISDN_STAT_RUN",
-			  "ISDN_STAT_STOP",
-			  "ISDN_STAT_DCONN",
-			  "ISDN_STAT_BCONN",
-			  "ISDN_STAT_DHUP",
-			  "ISDN_STAT_BHUP",
-			  "ISDN_STAT_CINF",
-			  "ISDN_STAT_LOAD",
-			  "ISDN_STAT_UNLOAD",
-			  "ISDN_STAT_BSENT",
-			  "ISDN_STAT_NODCH",
-			  "ISDN_STAT_ADDCH",
-			  "ISDN_STAT_CAUSE" };
-#endif
-
-int indicate_status(int card, int event, ulong Channel, char *Data)
-{
-	isdn_ctrl cmd;
-
-#ifdef DEBUG
-	pr_debug("%s: Indicating event %s on Channel %d\n",
-		 sc_adapter[card]->devicename, events[event - 256], Channel);
-#endif
-	if (Data != NULL) {
-		pr_debug("%s: Event data: %s\n", sc_adapter[card]->devicename,
-			 Data);
-		switch (event) {
-		case ISDN_STAT_BSENT:
-			memcpy(&cmd.parm.length, Data, sizeof(cmd.parm.length));
-			break;
-		case ISDN_STAT_ICALL:
-			memcpy(&cmd.parm.setup, Data, sizeof(cmd.parm.setup));
-			break;
-		default:
-			strlcpy(cmd.parm.num, Data, sizeof(cmd.parm.num));
-		}
-	}
-
-	cmd.command = event;
-	cmd.driver = sc_adapter[card]->driverId;
-	cmd.arg = Channel;
-	return sc_adapter[card]->card->statcallb(&cmd);
-}
diff --git a/drivers/isdn/sc/hardware.h b/drivers/isdn/sc/hardware.h
deleted file mode 100644
index 81fbe78701f0..000000000000
--- a/drivers/isdn/sc/hardware.h
+++ /dev/null
@@ -1,110 +0,0 @@
-/*
- * Hardware specific macros, defines and structures
- *
- * This software may be used and distributed according to the terms
- * of the GNU General Public License, incorporated herein by reference.
- *
- */
-
-#ifndef HARDWARE_H
-#define HARDWARE_H
-
-#include <asm/param.h>			/* For HZ */
-
-/*
- * General hardware parameters common to all ISA adapters
- */
-
-#define MAX_CARDS	4		/* The maximum number of cards to
-					   control or probe for. */
-
-#define SIGNATURE	0x87654321	/* Board reset signature */
-#define SIG_OFFSET	0x1004		/* Where to find signature in shared RAM */
-#define TRACE_OFFSET	0x1008		/* Trace enable word offset in shared RAM */
-#define BUFFER_OFFSET	0x1800		/* Beginning of buffers */
-
-/* I/O Port parameters */
-#define IOBASE_MIN	0x180		/* Lowest I/O port address */
-#define IOBASE_MAX	0x3C0		/* Highest I/O port address */
-#define IOBASE_OFFSET	0x20		/* Inter-board I/O port gap used during
-					   probing */
-#define FIFORD_OFFSET	0x0
-#define FIFOWR_OFFSET	0x400
-#define FIFOSTAT_OFFSET	0x1000
-#define RESET_OFFSET	0x2800
-#define PG0_OFFSET	0x3000		/* Offset from I/O Base for Page 0 register */
-#define PG1_OFFSET	0x3400		/* Offset from I/O Base for Page 1 register */
-#define PG2_OFFSET	0x3800		/* Offset from I/O Base for Page 2 register */
-#define PG3_OFFSET	0x3C00		/* Offset from I/O Base for Page 3 register */
-
-#define FIFO_READ	0		/* FIFO Read register */
-#define FIFO_WRITE	1		/* FIFO Write rgister */
-#define LO_ADDR_PTR	2		/* Extended RAM Low Addr Pointer */
-#define HI_ADDR_PTR	3		/* Extended RAM High Addr Pointer */
-#define NOT_USED_1	4
-#define FIFO_STATUS	5		/* FIFO Status Register */
-#define NOT_USED_2	6
-#define MEM_OFFSET	7
-#define SFT_RESET	10		/* Reset Register */
-#define EXP_BASE	11		/* Shared RAM Base address */
-#define EXP_PAGE0	12		/* Shared RAM Page0 register */
-#define EXP_PAGE1	13		/* Shared RAM Page1 register */
-#define EXP_PAGE2	14		/* Shared RAM Page2 register */
-#define EXP_PAGE3	15		/* Shared RAM Page3 register */
-#define IRQ_SELECT	16		/* IRQ selection register */
-#define MAX_IO_REGS	17		/* Total number of I/O ports */
-
-/* FIFO register values */
-#define RF_HAS_DATA	0x01		/* fifo has data */
-#define RF_QUART_FULL	0x02		/* fifo quarter full */
-#define RF_HALF_FULL	0x04		/* fifo half full */
-#define RF_NOT_FULL	0x08		/* fifo not full */
-#define WF_HAS_DATA	0x10		/* fifo has data */
-#define WF_QUART_FULL	0x20		/* fifo quarter full */
-#define WF_HALF_FULL	0x40		/* fifo half full */
-#define WF_NOT_FULL	0x80		/* fifo not full */
-
-/* Shared RAM parameters */
-#define SRAM_MIN	0xC0000         /* Lowest host shared RAM address */
-#define SRAM_MAX	0xEFFFF         /* Highest host shared RAM address */
-#define SRAM_PAGESIZE	0x4000		/* Size of one RAM page (16K) */
-
-/* Shared RAM buffer parameters */
-#define BUFFER_SIZE	0x800		/* The size of a buffer in bytes */
-#define BUFFER_BASE	BUFFER_OFFSET	/* Offset from start of shared RAM
-					   where buffer start */
-#define BUFFERS_MAX	16		/* Maximum number of send/receive
-					   buffers per channel */
-#define HDLC_PROTO	0x01		/* Frame Format for Layer 2 */
-
-#define BRI_BOARD	0
-#define POTS_BOARD	1
-#define PRI_BOARD	2
-
-/*
- * Specific hardware parameters for the DataCommute/BRI
- */
-#define BRI_CHANNELS	2		/* Number of B channels */
-#define BRI_BASEPG_VAL	0x98
-#define BRI_MAGIC	0x60000		/* Magic Number */
-#define BRI_MEMSIZE	0x10000		/* Amount of RAM (64K) */
-#define BRI_PARTNO	"72-029"
-#define BRI_FEATURES	ISDN_FEATURE_L2_HDLC | ISDN_FEATURE_L3_TRANS;
-/*
- * Specific hardware parameters for the DataCommute/PRI
- */
-#define PRI_CHANNELS	23		/* Number of B channels */
-#define PRI_BASEPG_VAL	0x88
-#define PRI_MAGIC	0x20000		/* Magic Number */
-#define PRI_MEMSIZE	0x100000	/* Amount of RAM (1M) */
-#define PRI_PARTNO	"72-030"
-#define PRI_FEATURES	ISDN_FEATURE_L2_HDLC | ISDN_FEATURE_L3_TRANS;
-
-/*
- * Some handy macros
- */
-
-/* Determine if a channel number is valid for the adapter */
-#define IS_VALID_CHANNEL(y, x)	((x > 0) && (x <= sc_adapter[y]->channels))
-
-#endif
diff --git a/drivers/isdn/sc/includes.h b/drivers/isdn/sc/includes.h
deleted file mode 100644
index 4766e5b77378..000000000000
--- a/drivers/isdn/sc/includes.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- * This software may be used and distributed according to the terms
- * of the GNU General Public License, incorporated herein by reference.
- *
- */
-
-#include <linux/errno.h>
-#include <asm/io.h>
-#include <linux/delay.h>
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/mm.h>
-#include <linux/ioport.h>
-#include <linux/timer.h>
-#include <linux/wait.h>
-#include <linux/isdnif.h>
diff --git a/drivers/isdn/sc/init.c b/drivers/isdn/sc/init.c
deleted file mode 100644
index 3597ef47b28a..000000000000
--- a/drivers/isdn/sc/init.c
+++ /dev/null
@@ -1,549 +0,0 @@
-/*
- * This software may be used and distributed according to the terms
- * of the GNU General Public License, incorporated herein by reference.
- *
- */
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/delay.h>
-#include <linux/sched.h>
-#include <linux/slab.h>
-#include "includes.h"
-#include "hardware.h"
-#include "card.h"
-
-MODULE_DESCRIPTION("ISDN4Linux: Driver for Spellcaster card");
-MODULE_AUTHOR("Spellcaster Telecommunications Inc.");
-MODULE_LICENSE("GPL");
-
-board *sc_adapter[MAX_CARDS];
-int cinst;
-
-static char devname[] = "scX";
-static const char version[] = "2.0b1";
-
-static const char *boardname[] = { "DataCommute/BRI", "DataCommute/PRI", "TeleCommute/BRI" };
-
-/* insmod set parameters */
-static unsigned int io[] = {0, 0, 0, 0};
-static unsigned char irq[] = {0, 0, 0, 0};
-static unsigned long ram[] = {0, 0, 0, 0};
-static bool do_reset;
-
-module_param_array(io, int, NULL, 0);
-module_param_array(irq, byte, NULL, 0);
-module_param_array(ram, long, NULL, 0);
-module_param(do_reset, bool, 0);
-
-static int identify_board(unsigned long, unsigned int);
-
-static int __init sc_init(void)
-{
-	int b = -1;
-	int i, j;
-	int status = -ENODEV;
-
-	unsigned long memsize = 0;
-	unsigned long features = 0;
-	isdn_if *interface;
-	unsigned char channels;
-	unsigned char pgport;
-	unsigned long magic;
-	int model;
-	int last_base = IOBASE_MIN;
-	int probe_exhasted = 0;
-
-#ifdef MODULE
-	pr_info("SpellCaster ISA ISDN Adapter Driver rev. %s Loaded\n", version);
-#else
-	pr_info("SpellCaster ISA ISDN Adapter Driver rev. %s\n", version);
-#endif
-	pr_info("Copyright (C) 1996 SpellCaster Telecommunications Inc.\n");
-
-	while (b++ < MAX_CARDS - 1) {
-		pr_debug("Probing for adapter #%d\n", b);
-		/*
-		 * Initialize reusable variables
-		 */
-		model = -1;
-		magic = 0;
-		channels = 0;
-		pgport = 0;
-
-		/*
-		 * See if we should probe for IO base
-		 */
-		pr_debug("I/O Base for board %d is 0x%x, %s probe\n", b, io[b],
-			 io[b] == 0 ? "will" : "won't");
-		if (io[b]) {
-			/*
-			 * No, I/O Base has been provided
-			 */
-			for (i = 0; i < MAX_IO_REGS - 1; i++) {
-				if (!request_region(io[b] + i * 0x400, 1, "sc test")) {
-					pr_debug("request_region for 0x%x failed\n", io[b] + i * 0x400);
-					io[b] = 0;
-					break;
-				} else
-					release_region(io[b] + i * 0x400, 1);
-			}
-
-			/*
-			 * Confirm the I/O Address with a test
-			 */
-			if (io[b] == 0) {
-				pr_debug("I/O Address invalid.\n");
-				continue;
-			}
-
-			outb(0x18, io[b] + 0x400 * EXP_PAGE0);
-			if (inb(io[b] + 0x400 * EXP_PAGE0) != 0x18) {
-				pr_debug("I/O Base 0x%x fails test\n",
-					 io[b] + 0x400 * EXP_PAGE0);
-				continue;
-			}
-		} else {
-			/*
-			 * Yes, probe for I/O Base
-			 */
-			if (probe_exhasted) {
-				pr_debug("All probe addresses exhausted, skipping\n");
-				continue;
-			}
-			pr_debug("Probing for I/O...\n");
-			for (i = last_base; i <= IOBASE_MAX; i += IOBASE_OFFSET) {
-				int found_io = 1;
-				if (i == IOBASE_MAX) {
-					probe_exhasted = 1; /* No more addresses to probe */
-					pr_debug("End of Probes\n");
-				}
-				last_base = i + IOBASE_OFFSET;
-				pr_debug("  checking 0x%x...", i);
-				for (j = 0; j < MAX_IO_REGS - 1; j++) {
-					if (!request_region(i + j * 0x400, 1, "sc test")) {
-						pr_debug("Failed\n");
-						found_io = 0;
-						break;
-					} else
-						release_region(i + j * 0x400, 1);
-				}
-
-				if (found_io) {
-					io[b] = i;
-					outb(0x18, io[b] + 0x400 * EXP_PAGE0);
-					if (inb(io[b] + 0x400 * EXP_PAGE0) != 0x18) {
-						pr_debug("Failed by test\n");
-						continue;
-					}
-					pr_debug("Passed\n");
-					break;
-				}
-			}
-			if (probe_exhasted) {
-				continue;
-			}
-		}
-
-		/*
-		 * See if we should probe for shared RAM
-		 */
-		if (do_reset) {
-			pr_debug("Doing a SAFE probe reset\n");
-			outb(0xFF, io[b] + RESET_OFFSET);
-			msleep_interruptible(10000);
-		}
-		pr_debug("RAM Base for board %d is 0x%lx, %s probe\n", b,
-			 ram[b], ram[b] == 0 ? "will" : "won't");
-
-		if (ram[b]) {
-			/*
-			 * No, the RAM base has been provided
-			 * Just look for a signature and ID the
-			 * board model
-			 */
-			if (request_region(ram[b], SRAM_PAGESIZE, "sc test")) {
-				pr_debug("request_region for RAM base 0x%lx succeeded\n", ram[b]);
-				model = identify_board(ram[b], io[b]);
-				release_region(ram[b], SRAM_PAGESIZE);
-			}
-		} else {
-			/*
-			 * Yes, probe for free RAM and look for
-			 * a signature and id the board model
-			 */
-			for (i = SRAM_MIN; i < SRAM_MAX; i += SRAM_PAGESIZE) {
-				pr_debug("Checking RAM address 0x%x...\n", i);
-				if (request_region(i, SRAM_PAGESIZE, "sc test")) {
-					pr_debug("  request_region succeeded\n");
-					model = identify_board(i, io[b]);
-					release_region(i, SRAM_PAGESIZE);
-					if (model >= 0) {
-						pr_debug("  Identified a %s\n",
-							 boardname[model]);
-						ram[b] = i;
-						break;
-					}
-					pr_debug("  Unidentified or inaccessible\n");
-					continue;
-				}
-				pr_debug("  request failed\n");
-			}
-		}
-		/*
-		 * See if we found free RAM and the board model
-		 */
-		if (!ram[b] || model < 0) {
-			/*
-			 * Nope, there was no place in RAM for the
-			 * board, or it couldn't be identified
-			 */
-			pr_debug("Failed to find an adapter at 0x%lx\n", ram[b]);
-			continue;
-		}
-
-		/*
-		 * Set the board's magic number, memory size and page register
-		 */
-		switch (model) {
-		case PRI_BOARD:
-			channels = 23;
-			magic = 0x20000;
-			memsize = 0x100000;
-			features = PRI_FEATURES;
-			break;
-
-		case BRI_BOARD:
-		case POTS_BOARD:
-			channels = 2;
-			magic = 0x60000;
-			memsize = 0x10000;
-			features = BRI_FEATURES;
-			break;
-		}
-		switch (ram[b] >> 12 & 0x0F) {
-		case 0x0:
-			pr_debug("RAM Page register set to EXP_PAGE0\n");
-			pgport = EXP_PAGE0;
-			break;
-
-		case 0x4:
-			pr_debug("RAM Page register set to EXP_PAGE1\n");
-			pgport = EXP_PAGE1;
-			break;
-
-		case 0x8:
-			pr_debug("RAM Page register set to EXP_PAGE2\n");
-			pgport = EXP_PAGE2;
-			break;
-
-		case 0xC:
-			pr_debug("RAM Page register set to EXP_PAGE3\n");
-			pgport = EXP_PAGE3;
-			break;
-
-		default:
-			pr_debug("RAM base address doesn't fall on 16K boundary\n");
-			continue;
-		}
-
-		pr_debug("current IRQ: %d  b: %d\n", irq[b], b);
-
-		/*
-		 * Make sure we got an IRQ
-		 */
-		if (!irq[b]) {
-			/*
-			 * No interrupt could be used
-			 */
-			pr_debug("Failed to acquire an IRQ line\n");
-			continue;
-		}
-
-		/*
-		 * Horray! We found a board, Make sure we can register
-		 * it with ISDN4Linux
-		 */
-		interface = kzalloc(sizeof(isdn_if), GFP_KERNEL);
-		if (interface == NULL) {
-			/*
-			 * Oops, can't malloc isdn_if
-			 */
-			continue;
-		}
-
-		interface->owner = THIS_MODULE;
-		interface->hl_hdrlen = 0;
-		interface->channels = channels;
-		interface->maxbufsize = BUFFER_SIZE;
-		interface->features = features;
-		interface->writebuf_skb = sndpkt;
-		interface->writecmd = NULL;
-		interface->command = command;
-		strcpy(interface->id, devname);
-		interface->id[2] = '0' + cinst;
-
-		/*
-		 * Allocate the board structure
-		 */
-		sc_adapter[cinst] = kzalloc(sizeof(board), GFP_KERNEL);
-		if (sc_adapter[cinst] == NULL) {
-			/*
-			 * Oops, can't alloc memory for the board
-			 */
-			kfree(interface);
-			continue;
-		}
-		spin_lock_init(&sc_adapter[cinst]->lock);
-
-		if (!register_isdn(interface)) {
-			/*
-			 * Oops, couldn't register for some reason
-			 */
-			kfree(interface);
-			kfree(sc_adapter[cinst]);
-			continue;
-		}
-
-		sc_adapter[cinst]->card = interface;
-		sc_adapter[cinst]->driverId = interface->channels;
-		strcpy(sc_adapter[cinst]->devicename, interface->id);
-		sc_adapter[cinst]->nChannels = channels;
-		sc_adapter[cinst]->ramsize = memsize;
-		sc_adapter[cinst]->shmem_magic = magic;
-		sc_adapter[cinst]->shmem_pgport = pgport;
-		sc_adapter[cinst]->StartOnReset = 1;
-
-		/*
-		 * Allocate channels status structures
-		 */
-		sc_adapter[cinst]->channel = kzalloc(sizeof(bchan) * channels, GFP_KERNEL);
-		if (sc_adapter[cinst]->channel == NULL) {
-			/*
-			 * Oops, can't alloc memory for the channels
-			 */
-			indicate_status(cinst, ISDN_STAT_UNLOAD, 0, NULL);	/* Fix me */
-			kfree(interface);
-			kfree(sc_adapter[cinst]);
-			continue;
-		}
-
-		/*
-		 * Lock down the hardware resources
-		 */
-		sc_adapter[cinst]->interrupt = irq[b];
-		if (request_irq(sc_adapter[cinst]->interrupt, interrupt_handler,
-				0, interface->id,
-				(void *)(unsigned long) cinst)) {
-			kfree(sc_adapter[cinst]->channel);
-			indicate_status(cinst, ISDN_STAT_UNLOAD, 0, NULL);	/* Fix me */
-			kfree(interface);
-			kfree(sc_adapter[cinst]);
-			continue;
-
-		}
-		sc_adapter[cinst]->iobase = io[b];
-		for (i = 0; i < MAX_IO_REGS - 1; i++) {
-			sc_adapter[cinst]->ioport[i] = io[b] + i * 0x400;
-			request_region(sc_adapter[cinst]->ioport[i], 1,
-				       interface->id);
-			pr_debug("Requesting I/O Port %#x\n",
-				 sc_adapter[cinst]->ioport[i]);
-		}
-		sc_adapter[cinst]->ioport[IRQ_SELECT] = io[b] + 0x2;
-		request_region(sc_adapter[cinst]->ioport[IRQ_SELECT], 1,
-			       interface->id);
-		pr_debug("Requesting I/O Port %#x\n",
-			 sc_adapter[cinst]->ioport[IRQ_SELECT]);
-		sc_adapter[cinst]->rambase = ram[b];
-		request_region(sc_adapter[cinst]->rambase, SRAM_PAGESIZE,
-			       interface->id);
-
-		pr_info("  %s (%d) - %s %d channels IRQ %d, I/O Base 0x%x, RAM Base 0x%lx\n",
-			sc_adapter[cinst]->devicename,
-			sc_adapter[cinst]->driverId,
-			boardname[model], channels, irq[b], io[b], ram[b]);
-
-		/*
-		 * reset the adapter to put things in motion
-		 */
-		reset(cinst);
-
-		cinst++;
-		status = 0;
-	}
-	if (status)
-		pr_info("Failed to find any adapters, driver unloaded\n");
-	return status;
-}
-
-static void __exit sc_exit(void)
-{
-	int i, j;
-
-	for (i = 0; i < cinst; i++) {
-		pr_debug("Cleaning up after adapter %d\n", i);
-		/*
-		 * kill the timers
-		 */
-		del_timer_sync(&(sc_adapter[i]->reset_timer));
-		del_timer_sync(&(sc_adapter[i]->stat_timer));
-
-		/*
-		 * Tell I4L we're toast
-		 */
-		indicate_status(i, ISDN_STAT_STOP, 0, NULL);
-		indicate_status(i, ISDN_STAT_UNLOAD, 0, NULL);
-
-		/*
-		 * Release shared RAM
-		 */
-		release_region(sc_adapter[i]->rambase, SRAM_PAGESIZE);
-
-		/*
-		 * Release the IRQ
-		 */
-		free_irq(sc_adapter[i]->interrupt, NULL);
-
-		/*
-		 * Reset for a clean start
-		 */
-		outb(0xFF, sc_adapter[i]->ioport[SFT_RESET]);
-
-		/*
-		 * Release the I/O Port regions
-		 */
-		for (j = 0; j < MAX_IO_REGS - 1; j++) {
-			release_region(sc_adapter[i]->ioport[j], 1);
-			pr_debug("Releasing I/O Port %#x\n",
-				 sc_adapter[i]->ioport[j]);
-		}
-		release_region(sc_adapter[i]->ioport[IRQ_SELECT], 1);
-		pr_debug("Releasing I/O Port %#x\n",
-			 sc_adapter[i]->ioport[IRQ_SELECT]);
-
-		/*
-		 * Release any memory we alloced
-		 */
-		kfree(sc_adapter[i]->channel);
-		kfree(sc_adapter[i]->card);
-		kfree(sc_adapter[i]);
-	}
-	pr_info("SpellCaster ISA ISDN Adapter Driver Unloaded.\n");
-}
-
-static int identify_board(unsigned long rambase, unsigned int iobase)
-{
-	unsigned int pgport;
-	unsigned long sig;
-	DualPortMemory *dpm;
-	RspMessage rcvmsg;
-	ReqMessage sndmsg;
-	HWConfig_pl hwci;
-	int x;
-
-	pr_debug("Attempting to identify adapter @ 0x%lx io 0x%x\n",
-		 rambase, iobase);
-
-	/*
-	 * Enable the base pointer
-	 */
-	outb(rambase >> 12, iobase + 0x2c00);
-
-	switch (rambase >> 12 & 0x0F) {
-	case 0x0:
-		pgport = iobase + PG0_OFFSET;
-		pr_debug("Page Register offset is 0x%x\n", PG0_OFFSET);
-		break;
-
-	case 0x4:
-		pgport = iobase + PG1_OFFSET;
-		pr_debug("Page Register offset is 0x%x\n", PG1_OFFSET);
-		break;
-
-	case 0x8:
-		pgport = iobase + PG2_OFFSET;
-		pr_debug("Page Register offset is 0x%x\n", PG2_OFFSET);
-		break;
-
-	case 0xC:
-		pgport = iobase + PG3_OFFSET;
-		pr_debug("Page Register offset is 0x%x\n", PG3_OFFSET);
-		break;
-	default:
-		pr_debug("Invalid rambase 0x%lx\n", rambase);
-		return -1;
-	}
-
-	/*
-	 * Try to identify a PRI card
-	 */
-	outb(PRI_BASEPG_VAL, pgport);
-	msleep_interruptible(1000);
-	sig = readl(rambase + SIG_OFFSET);
-	pr_debug("Looking for a signature, got 0x%lx\n", sig);
-	if (sig == SIGNATURE)
-		return PRI_BOARD;
-
-	/*
-	 * Try to identify a PRI card
-	 */
-	outb(BRI_BASEPG_VAL, pgport);
-	msleep_interruptible(1000);
-	sig = readl(rambase + SIG_OFFSET);
-	pr_debug("Looking for a signature, got 0x%lx\n", sig);
-	if (sig == SIGNATURE)
-		return BRI_BOARD;
-
-	return -1;
-
-	/*
-	 * Try to spot a card
-	 */
-	sig = readl(rambase + SIG_OFFSET);
-	pr_debug("Looking for a signature, got 0x%lx\n", sig);
-	if (sig != SIGNATURE)
-		return -1;
-
-	dpm = (DualPortMemory *) rambase;
-
-	memset(&sndmsg, 0, MSG_LEN);
-	sndmsg.msg_byte_cnt = 3;
-	sndmsg.type = cmReqType1;
-	sndmsg.class = cmReqClass0;
-	sndmsg.code = cmReqHWConfig;
-	memcpy_toio(&(dpm->req_queue[dpm->req_head++]), &sndmsg, MSG_LEN);
-	outb(0, iobase + 0x400);
-	pr_debug("Sent HWConfig message\n");
-	/*
-	 * Wait for the response
-	 */
-	x = 0;
-	while ((inb(iobase + FIFOSTAT_OFFSET) & RF_HAS_DATA) && x < 100) {
-		schedule_timeout_interruptible(1);
-		x++;
-	}
-	if (x == 100) {
-		pr_debug("Timeout waiting for response\n");
-		return -1;
-	}
-
-	memcpy_fromio(&rcvmsg, &(dpm->rsp_queue[dpm->rsp_tail]), MSG_LEN);
-	pr_debug("Got HWConfig response, status = 0x%x\n", rcvmsg.rsp_status);
-	memcpy(&hwci, &(rcvmsg.msg_data.HWCresponse), sizeof(HWConfig_pl));
-	pr_debug("Hardware Config: Interface: %s, RAM Size: %ld, Serial: %s\n"
-		 "                 Part: %s, Rev: %s\n",
-		 hwci.st_u_sense ? "S/T" : "U", hwci.ram_size,
-		 hwci.serial_no, hwci.part_no, hwci.rev_no);
-
-	if (!strncmp(PRI_PARTNO, hwci.part_no, 6))
-		return PRI_BOARD;
-	if (!strncmp(BRI_PARTNO, hwci.part_no, 6))
-		return BRI_BOARD;
-
-	return -1;
-}
-
-module_init(sc_init);
-module_exit(sc_exit);
diff --git a/drivers/isdn/sc/interrupt.c b/drivers/isdn/sc/interrupt.c
deleted file mode 100644
index e80cc76bc314..000000000000
--- a/drivers/isdn/sc/interrupt.c
+++ /dev/null
@@ -1,247 +0,0 @@
-/* $Id: interrupt.c,v 1.4.8.3 2001/09/23 22:24:59 kai Exp $
- *
- * Copyright (C) 1996  SpellCaster Telecommunications Inc.
- *
- * This software may be used and distributed according to the terms
- * of the GNU General Public License, incorporated herein by reference.
- *
- * For more information, please contact gpl-info@spellcast.com or write:
- *
- *     SpellCaster Telecommunications Inc.
- *     5621 Finch Avenue East, Unit #3
- *     Scarborough, Ontario  Canada
- *     M1B 2T9
- *     +1 (416) 297-8565
- *     +1 (416) 297-6433 Facsimile
- */
-
-#include "includes.h"
-#include "hardware.h"
-#include "message.h"
-#include "card.h"
-#include <linux/interrupt.h>
-
-/*
- *
- */
-irqreturn_t interrupt_handler(int dummy, void *card_inst)
-{
-
-	RspMessage rcvmsg;
-	int channel;
-	int card = (int)(unsigned long) card_inst;
-
-	if (!IS_VALID_CARD(card)) {
-		pr_debug("Invalid param: %d is not a valid card id\n", card);
-		return IRQ_NONE;
-	}
-
-	pr_debug("%s: Entered Interrupt handler\n",
-		 sc_adapter[card]->devicename);
-
-	/*
-	 * Pull all of the waiting messages off the response queue
-	 */
-	while (!receivemessage(card, &rcvmsg)) {
-		/*
-		 * Push the message to the adapter structure for
-		 * send_and_receive to snoop
-		 */
-		if (sc_adapter[card]->want_async_messages)
-			memcpy(&(sc_adapter[card]->async_msg),
-			       &rcvmsg, sizeof(RspMessage));
-
-		channel = (unsigned int) rcvmsg.phy_link_no;
-
-		/*
-		 * Trap Invalid request messages
-		 */
-		if (IS_CM_MESSAGE(rcvmsg, 0, 0, Invalid)) {
-			pr_debug("%s: Invalid request Message, rsp_status = %d\n",
-				 sc_adapter[card]->devicename,
-				 rcvmsg.rsp_status);
-			break;
-		}
-
-		/*
-		 * Check for a linkRead message
-		 */
-		if (IS_CE_MESSAGE(rcvmsg, Lnk, 1, Read))
-		{
-			pr_debug("%s: Received packet 0x%x bytes long at 0x%lx\n",
-				 sc_adapter[card]->devicename,
-				 rcvmsg.msg_data.response.msg_len,
-				 rcvmsg.msg_data.response.buff_offset);
-			rcvpkt(card, &rcvmsg);
-			continue;
-
-		}
-
-		/*
-		 * Handle a write acknoledgement
-		 */
-		if (IS_CE_MESSAGE(rcvmsg, Lnk, 1, Write)) {
-			pr_debug("%s: Packet Send ACK on channel %d\n",
-				 sc_adapter[card]->devicename,
-				 rcvmsg.phy_link_no);
-			sc_adapter[card]->channel[rcvmsg.phy_link_no - 1].free_sendbufs++;
-			continue;
-		}
-
-		/*
-		 * Handle a connection message
-		 */
-		if (IS_CE_MESSAGE(rcvmsg, Phy, 1, Connect))
-		{
-			unsigned int callid;
-			setup_parm setup;
-			pr_debug("%s: Connect message: line %d: status %d: cause 0x%x\n",
-				 sc_adapter[card]->devicename,
-				 rcvmsg.phy_link_no,
-				 rcvmsg.rsp_status,
-				 rcvmsg.msg_data.byte_array[2]);
-
-			memcpy(&callid, rcvmsg.msg_data.byte_array, sizeof(int));
-			if (callid >= 0x8000 && callid <= 0xFFFF)
-			{
-				pr_debug("%s: Got Dial-Out Rsp\n",
-					 sc_adapter[card]->devicename);
-				indicate_status(card, ISDN_STAT_DCONN,
-						(unsigned long)rcvmsg.phy_link_no - 1, NULL);
-
-			}
-			else if (callid >= 0x0000 && callid <= 0x7FFF)
-			{
-				int len;
-
-				pr_debug("%s: Got Incoming Call\n",
-					 sc_adapter[card]->devicename);
-				len = strlcpy(setup.phone, &(rcvmsg.msg_data.byte_array[4]),
-					      sizeof(setup.phone));
-				if (len >= sizeof(setup.phone))
-					continue;
-				len = strlcpy(setup.eazmsn,
-					      sc_adapter[card]->channel[rcvmsg.phy_link_no - 1].dn,
-					      sizeof(setup.eazmsn));
-				if (len >= sizeof(setup.eazmsn))
-					continue;
-				setup.si1 = 7;
-				setup.si2 = 0;
-				setup.plan = 0;
-				setup.screen = 0;
-
-				indicate_status(card, ISDN_STAT_ICALL, (unsigned long)rcvmsg.phy_link_no - 1, (char *)&setup);
-				indicate_status(card, ISDN_STAT_DCONN, (unsigned long)rcvmsg.phy_link_no - 1, NULL);
-			}
-			continue;
-		}
-
-		/*
-		 * Handle a disconnection message
-		 */
-		if (IS_CE_MESSAGE(rcvmsg, Phy, 1, Disconnect))
-		{
-			pr_debug("%s: disconnect message: line %d: status %d: cause 0x%x\n",
-				 sc_adapter[card]->devicename,
-				 rcvmsg.phy_link_no,
-				 rcvmsg.rsp_status,
-				 rcvmsg.msg_data.byte_array[2]);
-
-			indicate_status(card, ISDN_STAT_BHUP, (unsigned long)rcvmsg.phy_link_no - 1, NULL);
-			indicate_status(card, ISDN_STAT_DHUP, (unsigned long)rcvmsg.phy_link_no - 1, NULL);
-			continue;
-
-		}
-
-		/*
-		 * Handle a startProc engine up message
-		 */
-		if (IS_CM_MESSAGE(rcvmsg, 5, 0, MiscEngineUp)) {
-			pr_debug("%s: Received EngineUp message\n",
-				 sc_adapter[card]->devicename);
-			sc_adapter[card]->EngineUp = 1;
-			sendmessage(card, CEPID, ceReqTypeCall, ceReqClass0, ceReqCallGetMyNumber, 1, 0, NULL);
-			sendmessage(card, CEPID, ceReqTypeCall, ceReqClass0, ceReqCallGetMyNumber, 2, 0, NULL);
-			init_timer(&sc_adapter[card]->stat_timer);
-			sc_adapter[card]->stat_timer.function = check_phystat;
-			sc_adapter[card]->stat_timer.data = card;
-			sc_adapter[card]->stat_timer.expires = jiffies + CHECKSTAT_TIME;
-			add_timer(&sc_adapter[card]->stat_timer);
-			continue;
-		}
-
-		/*
-		 * Start proc response
-		 */
-		if (IS_CM_MESSAGE(rcvmsg, 2, 0, StartProc)) {
-			pr_debug("%s: StartProc Response Status %d\n",
-				 sc_adapter[card]->devicename,
-				 rcvmsg.rsp_status);
-			continue;
-		}
-
-		/*
-		 * Handle a GetMyNumber Rsp
-		 */
-		if (IS_CE_MESSAGE(rcvmsg, Call, 0, GetMyNumber)) {
-			strlcpy(sc_adapter[card]->channel[rcvmsg.phy_link_no - 1].dn,
-				rcvmsg.msg_data.byte_array,
-				sizeof(rcvmsg.msg_data.byte_array));
-			continue;
-		}
-
-		/*
-		 * PhyStatus response
-		 */
-		if (IS_CE_MESSAGE(rcvmsg, Phy, 2, Status)) {
-			unsigned int b1stat, b2stat;
-
-			/*
-			 * Covert the message data to the adapter->phystat code
-			 */
-			b1stat = (unsigned int) rcvmsg.msg_data.byte_array[0];
-			b2stat = (unsigned int) rcvmsg.msg_data.byte_array[1];
-
-			sc_adapter[card]->nphystat = (b2stat >> 8) | b1stat; /* endian?? */
-			pr_debug("%s: PhyStat is 0x%2x\n",
-				 sc_adapter[card]->devicename,
-				 sc_adapter[card]->nphystat);
-			continue;
-		}
-
-
-		/*
-		 * Handle a GetFramFormat
-		 */
-		if (IS_CE_MESSAGE(rcvmsg, Call, 0, GetFrameFormat)) {
-			if (rcvmsg.msg_data.byte_array[0] != HDLC_PROTO) {
-				unsigned int proto = HDLC_PROTO;
-				/*
-				 * Set board format to HDLC if it wasn't already
-				 */
-				pr_debug("%s: current frame format: 0x%x, will change to HDLC\n",
-					 sc_adapter[card]->devicename,
-					 rcvmsg.msg_data.byte_array[0]);
-				sendmessage(card, CEPID, ceReqTypeCall,
-					    ceReqClass0,
-					    ceReqCallSetFrameFormat,
-					    (unsigned char)channel + 1,
-					    1, &proto);
-			}
-			continue;
-		}
-
-		/*
-		 * Hmm...
-		 */
-		pr_debug("%s: Received unhandled message (%d,%d,%d) link %d\n",
-			 sc_adapter[card]->devicename,
-			 rcvmsg.type, rcvmsg.class, rcvmsg.code,
-			 rcvmsg.phy_link_no);
-
-	}	/* while */
-
-	pr_debug("%s: Exiting Interrupt Handler\n",
-		 sc_adapter[card]->devicename);
-	return IRQ_HANDLED;
-}
diff --git a/drivers/isdn/sc/ioctl.c b/drivers/isdn/sc/ioctl.c
deleted file mode 100644
index e63983aa1d27..000000000000
--- a/drivers/isdn/sc/ioctl.c
+++ /dev/null
@@ -1,582 +0,0 @@
-/*
- * Copyright (C) 1996  SpellCaster Telecommunications Inc.
- *
- * This software may be used and distributed according to the terms
- * of the GNU General Public License, incorporated herein by reference.
- *
- */
-
-#include "includes.h"
-#include "hardware.h"
-#include "message.h"
-#include "card.h"
-#include "scioc.h"
-
-static int GetStatus(int card, boardInfo *);
-
-/*
- * Process private IOCTL messages (typically from scctrl)
- */
-int sc_ioctl(int card, scs_ioctl *data)
-{
-	int		status;
-	RspMessage	*rcvmsg;
-	char		*spid;
-	char		*dn;
-	char		switchtype;
-	char		speed;
-
-	rcvmsg = kmalloc(sizeof(RspMessage), GFP_KERNEL);
-	if (!rcvmsg)
-		return -ENOMEM;
-
-	switch (data->command) {
-	case SCIOCRESET:	/* Perform a hard reset of the adapter */
-	{
-		pr_debug("%s: SCIOCRESET: ioctl received\n",
-			 sc_adapter[card]->devicename);
-		sc_adapter[card]->StartOnReset = 0;
-		kfree(rcvmsg);
-		return reset(card);
-	}
-
-	case SCIOCLOAD:
-	{
-		char *srec;
-
-		srec = kmalloc(SCIOC_SRECSIZE, GFP_KERNEL);
-		if (!srec) {
-			kfree(rcvmsg);
-			return -ENOMEM;
-		}
-		pr_debug("%s: SCIOLOAD: ioctl received\n",
-			 sc_adapter[card]->devicename);
-		if (sc_adapter[card]->EngineUp) {
-			pr_debug("%s: SCIOCLOAD: command failed, LoadProc while engine running.\n",
-				 sc_adapter[card]->devicename);
-			kfree(rcvmsg);
-			kfree(srec);
-			return -1;
-		}
-
-		/*
-		 * Get the SRec from user space
-		 */
-		if (copy_from_user(srec, data->dataptr, SCIOC_SRECSIZE)) {
-			kfree(rcvmsg);
-			kfree(srec);
-			return -EFAULT;
-		}
-
-		status = send_and_receive(card, CMPID, cmReqType2, cmReqClass0, cmReqLoadProc,
-					  0, SCIOC_SRECSIZE, srec, rcvmsg, SAR_TIMEOUT);
-		kfree(rcvmsg);
-		kfree(srec);
-
-		if (status) {
-			pr_debug("%s: SCIOCLOAD: command failed, status = %d\n",
-				 sc_adapter[card]->devicename, status);
-			return -1;
-		}
-		else {
-			pr_debug("%s: SCIOCLOAD: command successful\n",
-				 sc_adapter[card]->devicename);
-			return 0;
-		}
-	}
-
-	case SCIOCSTART:
-	{
-		kfree(rcvmsg);
-		pr_debug("%s: SCIOSTART: ioctl received\n",
-			 sc_adapter[card]->devicename);
-		if (sc_adapter[card]->EngineUp) {
-			pr_debug("%s: SCIOCSTART: command failed, engine already running.\n",
-				 sc_adapter[card]->devicename);
-			return -1;
-		}
-
-		sc_adapter[card]->StartOnReset = 1;
-		startproc(card);
-		return 0;
-	}
-
-	case SCIOCSETSWITCH:
-	{
-		pr_debug("%s: SCIOSETSWITCH: ioctl received\n",
-			 sc_adapter[card]->devicename);
-
-		/*
-		 * Get the switch type from user space
-		 */
-		if (copy_from_user(&switchtype, data->dataptr, sizeof(char))) {
-			kfree(rcvmsg);
-			return -EFAULT;
-		}
-
-		pr_debug("%s: SCIOCSETSWITCH: setting switch type to %d\n",
-			 sc_adapter[card]->devicename,
-			 switchtype);
-		status = send_and_receive(card, CEPID, ceReqTypeCall, ceReqClass0, ceReqCallSetSwitchType,
-					  0, sizeof(char), &switchtype, rcvmsg, SAR_TIMEOUT);
-		if (!status && !(rcvmsg->rsp_status)) {
-			pr_debug("%s: SCIOCSETSWITCH: command successful\n",
-				 sc_adapter[card]->devicename);
-			kfree(rcvmsg);
-			return 0;
-		}
-		else {
-			pr_debug("%s: SCIOCSETSWITCH: command failed (status = %d)\n",
-				 sc_adapter[card]->devicename, status);
-			kfree(rcvmsg);
-			return status;
-		}
-	}
-
-	case SCIOCGETSWITCH:
-	{
-		pr_debug("%s: SCIOGETSWITCH: ioctl received\n",
-			 sc_adapter[card]->devicename);
-
-		/*
-		 * Get the switch type from the board
-		 */
-		status = send_and_receive(card, CEPID, ceReqTypeCall, ceReqClass0,
-					  ceReqCallGetSwitchType, 0, 0, NULL, rcvmsg, SAR_TIMEOUT);
-		if (!status && !(rcvmsg->rsp_status)) {
-			pr_debug("%s: SCIOCGETSWITCH: command successful\n",
-				 sc_adapter[card]->devicename);
-		}
-		else {
-			pr_debug("%s: SCIOCGETSWITCH: command failed (status = %d)\n",
-				 sc_adapter[card]->devicename, status);
-			kfree(rcvmsg);
-			return status;
-		}
-
-		switchtype = rcvmsg->msg_data.byte_array[0];
-
-		/*
-		 * Package the switch type and send to user space
-		 */
-		if (copy_to_user(data->dataptr, &switchtype,
-				 sizeof(char))) {
-			kfree(rcvmsg);
-			return -EFAULT;
-		}
-
-		kfree(rcvmsg);
-		return 0;
-	}
-
-	case SCIOCGETSPID:
-	{
-		pr_debug("%s: SCIOGETSPID: ioctl received\n",
-			 sc_adapter[card]->devicename);
-
-		spid = kzalloc(SCIOC_SPIDSIZE, GFP_KERNEL);
-		if (!spid) {
-			kfree(rcvmsg);
-			return -ENOMEM;
-		}
-		/*
-		 * Get the spid from the board
-		 */
-		status = send_and_receive(card, CEPID, ceReqTypeCall, ceReqClass0, ceReqCallGetSPID,
-					  data->channel, 0, NULL, rcvmsg, SAR_TIMEOUT);
-		if (!status) {
-			pr_debug("%s: SCIOCGETSPID: command successful\n",
-				 sc_adapter[card]->devicename);
-		} else {
-			pr_debug("%s: SCIOCGETSPID: command failed (status = %d)\n",
-				 sc_adapter[card]->devicename, status);
-			kfree(spid);
-			kfree(rcvmsg);
-			return status;
-		}
-		strlcpy(spid, rcvmsg->msg_data.byte_array, SCIOC_SPIDSIZE);
-
-		/*
-		 * Package the switch type and send to user space
-		 */
-		if (copy_to_user(data->dataptr, spid, SCIOC_SPIDSIZE)) {
-			kfree(spid);
-			kfree(rcvmsg);
-			return -EFAULT;
-		}
-
-		kfree(spid);
-		kfree(rcvmsg);
-		return 0;
-	}
-
-	case SCIOCSETSPID:
-	{
-		pr_debug("%s: DCBIOSETSPID: ioctl received\n",
-			 sc_adapter[card]->devicename);
-
-		/*
-		 * Get the spid from user space
-		 */
-		spid = memdup_user(data->dataptr, SCIOC_SPIDSIZE);
-		if (IS_ERR(spid)) {
-			kfree(rcvmsg);
-			return PTR_ERR(spid);
-		}
-
-		pr_debug("%s: SCIOCSETSPID: setting channel %d spid to %s\n",
-			 sc_adapter[card]->devicename, data->channel, spid);
-		status = send_and_receive(card, CEPID, ceReqTypeCall,
-					  ceReqClass0, ceReqCallSetSPID, data->channel,
-					  strlen(spid), spid, rcvmsg, SAR_TIMEOUT);
-		if (!status && !(rcvmsg->rsp_status)) {
-			pr_debug("%s: SCIOCSETSPID: command successful\n",
-				 sc_adapter[card]->devicename);
-			kfree(rcvmsg);
-			kfree(spid);
-			return 0;
-		}
-		else {
-			pr_debug("%s: SCIOCSETSPID: command failed (status = %d)\n",
-				 sc_adapter[card]->devicename, status);
-			kfree(rcvmsg);
-			kfree(spid);
-			return status;
-		}
-	}
-
-	case SCIOCGETDN:
-	{
-		pr_debug("%s: SCIOGETDN: ioctl received\n",
-			 sc_adapter[card]->devicename);
-
-		/*
-		 * Get the dn from the board
-		 */
-		status = send_and_receive(card, CEPID, ceReqTypeCall, ceReqClass0, ceReqCallGetMyNumber,
-					  data->channel, 0, NULL, rcvmsg, SAR_TIMEOUT);
-		if (!status) {
-			pr_debug("%s: SCIOCGETDN: command successful\n",
-				 sc_adapter[card]->devicename);
-		}
-		else {
-			pr_debug("%s: SCIOCGETDN: command failed (status = %d)\n",
-				 sc_adapter[card]->devicename, status);
-			kfree(rcvmsg);
-			return status;
-		}
-
-		dn = kzalloc(SCIOC_DNSIZE, GFP_KERNEL);
-		if (!dn) {
-			kfree(rcvmsg);
-			return -ENOMEM;
-		}
-		strlcpy(dn, rcvmsg->msg_data.byte_array, SCIOC_DNSIZE);
-		kfree(rcvmsg);
-
-		/*
-		 * Package the dn and send to user space
-		 */
-		if (copy_to_user(data->dataptr, dn, SCIOC_DNSIZE)) {
-			kfree(dn);
-			return -EFAULT;
-		}
-		kfree(dn);
-		return 0;
-	}
-
-	case SCIOCSETDN:
-	{
-		pr_debug("%s: SCIOSETDN: ioctl received\n",
-			 sc_adapter[card]->devicename);
-
-		/*
-		 * Get the spid from user space
-		 */
-		dn = memdup_user(data->dataptr, SCIOC_DNSIZE);
-		if (IS_ERR(dn)) {
-			kfree(rcvmsg);
-			return PTR_ERR(dn);
-		}
-
-		pr_debug("%s: SCIOCSETDN: setting channel %d dn to %s\n",
-			 sc_adapter[card]->devicename, data->channel, dn);
-		status = send_and_receive(card, CEPID, ceReqTypeCall,
-					  ceReqClass0, ceReqCallSetMyNumber, data->channel,
-					  strlen(dn), dn, rcvmsg, SAR_TIMEOUT);
-		if (!status && !(rcvmsg->rsp_status)) {
-			pr_debug("%s: SCIOCSETDN: command successful\n",
-				 sc_adapter[card]->devicename);
-			kfree(rcvmsg);
-			kfree(dn);
-			return 0;
-		}
-		else {
-			pr_debug("%s: SCIOCSETDN: command failed (status = %d)\n",
-				 sc_adapter[card]->devicename, status);
-			kfree(rcvmsg);
-			kfree(dn);
-			return status;
-		}
-	}
-
-	case SCIOCTRACE:
-
-		pr_debug("%s: SCIOTRACE: ioctl received\n",
-			 sc_adapter[card]->devicename);
-/*		sc_adapter[card]->trace = !sc_adapter[card]->trace;
-		pr_debug("%s: SCIOCTRACE: tracing turned %s\n",
-		sc_adapter[card]->devicename,
-		sc_adapter[card]->trace ? "ON" : "OFF"); */
-		break;
-
-	case SCIOCSTAT:
-	{
-		boardInfo *bi;
-
-		pr_debug("%s: SCIOSTAT: ioctl received\n",
-			 sc_adapter[card]->devicename);
-
-		bi = kzalloc(sizeof(boardInfo), GFP_KERNEL);
-		if (!bi) {
-			kfree(rcvmsg);
-			return -ENOMEM;
-		}
-
-		kfree(rcvmsg);
-		GetStatus(card, bi);
-
-		if (copy_to_user(data->dataptr, bi, sizeof(boardInfo))) {
-			kfree(bi);
-			return -EFAULT;
-		}
-
-		kfree(bi);
-		return 0;
-	}
-
-	case SCIOCGETSPEED:
-	{
-		pr_debug("%s: SCIOGETSPEED: ioctl received\n",
-			 sc_adapter[card]->devicename);
-
-		/*
-		 * Get the speed from the board
-		 */
-		status = send_and_receive(card, CEPID, ceReqTypeCall, ceReqClass0,
-					  ceReqCallGetCallType, data->channel, 0, NULL, rcvmsg, SAR_TIMEOUT);
-		if (!status && !(rcvmsg->rsp_status)) {
-			pr_debug("%s: SCIOCGETSPEED: command successful\n",
-				 sc_adapter[card]->devicename);
-		}
-		else {
-			pr_debug("%s: SCIOCGETSPEED: command failed (status = %d)\n",
-				 sc_adapter[card]->devicename, status);
-			kfree(rcvmsg);
-			return status;
-		}
-
-		speed = rcvmsg->msg_data.byte_array[0];
-
-		kfree(rcvmsg);
-
-		/*
-		 * Package the switch type and send to user space
-		 */
-
-		if (copy_to_user(data->dataptr, &speed, sizeof(char)))
-			return -EFAULT;
-
-		return 0;
-	}
-
-	case SCIOCSETSPEED:
-		pr_debug("%s: SCIOCSETSPEED: ioctl received\n",
-			 sc_adapter[card]->devicename);
-		break;
-
-	case SCIOCLOOPTST:
-		pr_debug("%s: SCIOCLOOPTST: ioctl received\n",
-			 sc_adapter[card]->devicename);
-		break;
-
-	default:
-		kfree(rcvmsg);
-		return -1;
-	}
-
-	kfree(rcvmsg);
-	return 0;
-}
-
-static int GetStatus(int card, boardInfo *bi)
-{
-	RspMessage rcvmsg;
-	int i, status;
-
-	/*
-	 * Fill in some of the basic info about the board
-	 */
-	bi->modelid = sc_adapter[card]->model;
-	strcpy(bi->serial_no, sc_adapter[card]->hwconfig.serial_no);
-	strcpy(bi->part_no, sc_adapter[card]->hwconfig.part_no);
-	bi->iobase = sc_adapter[card]->iobase;
-	bi->rambase = sc_adapter[card]->rambase;
-	bi->irq = sc_adapter[card]->interrupt;
-	bi->ramsize = sc_adapter[card]->hwconfig.ram_size;
-	bi->interface = sc_adapter[card]->hwconfig.st_u_sense;
-	strcpy(bi->load_ver, sc_adapter[card]->load_ver);
-	strcpy(bi->proc_ver, sc_adapter[card]->proc_ver);
-
-	/*
-	 * Get the current PhyStats and LnkStats
-	 */
-	status = send_and_receive(card, CEPID, ceReqTypePhy, ceReqClass2,
-				  ceReqPhyStatus, 0, 0, NULL, &rcvmsg, SAR_TIMEOUT);
-	if (!status) {
-		if (sc_adapter[card]->model < PRI_BOARD) {
-			bi->l1_status = rcvmsg.msg_data.byte_array[2];
-			for (i = 0; i < BRI_CHANNELS; i++)
-				bi->status.bristats[i].phy_stat =
-					rcvmsg.msg_data.byte_array[i];
-		}
-		else {
-			bi->l1_status = rcvmsg.msg_data.byte_array[0];
-			bi->l2_status = rcvmsg.msg_data.byte_array[1];
-			for (i = 0; i < PRI_CHANNELS; i++)
-				bi->status.pristats[i].phy_stat =
-					rcvmsg.msg_data.byte_array[i + 2];
-		}
-	}
-
-	/*
-	 * Get the call types for each channel
-	 */
-	for (i = 0; i < sc_adapter[card]->nChannels; i++) {
-		status = send_and_receive(card, CEPID, ceReqTypeCall, ceReqClass0,
-					  ceReqCallGetCallType, 0, 0, NULL, &rcvmsg, SAR_TIMEOUT);
-		if (!status) {
-			if (sc_adapter[card]->model == PRI_BOARD) {
-				bi->status.pristats[i].call_type =
-					rcvmsg.msg_data.byte_array[0];
-			}
-			else {
-				bi->status.bristats[i].call_type =
-					rcvmsg.msg_data.byte_array[0];
-			}
-		}
-	}
-
-	/*
-	 * If PRI, get the call states and service states for each channel
-	 */
-	if (sc_adapter[card]->model == PRI_BOARD) {
-		/*
-		 * Get the call states
-		 */
-		status = send_and_receive(card, CEPID, ceReqTypeStat, ceReqClass2,
-					  ceReqPhyChCallState, 0, 0, NULL, &rcvmsg, SAR_TIMEOUT);
-		if (!status) {
-			for (i = 0; i < PRI_CHANNELS; i++)
-				bi->status.pristats[i].call_state =
-					rcvmsg.msg_data.byte_array[i];
-		}
-
-		/*
-		 * Get the service states
-		 */
-		status = send_and_receive(card, CEPID, ceReqTypeStat, ceReqClass2,
-					  ceReqPhyChServState, 0, 0, NULL, &rcvmsg, SAR_TIMEOUT);
-		if (!status) {
-			for (i = 0; i < PRI_CHANNELS; i++)
-				bi->status.pristats[i].serv_state =
-					rcvmsg.msg_data.byte_array[i];
-		}
-
-		/*
-		 * Get the link stats for the channels
-		 */
-		for (i = 1; i <= PRI_CHANNELS; i++) {
-			status = send_and_receive(card, CEPID, ceReqTypeLnk, ceReqClass0,
-						  ceReqLnkGetStats, i, 0, NULL, &rcvmsg, SAR_TIMEOUT);
-			if (!status) {
-				bi->status.pristats[i - 1].link_stats.tx_good =
-					(unsigned long)rcvmsg.msg_data.byte_array[0];
-				bi->status.pristats[i - 1].link_stats.tx_bad =
-					(unsigned long)rcvmsg.msg_data.byte_array[4];
-				bi->status.pristats[i - 1].link_stats.rx_good =
-					(unsigned long)rcvmsg.msg_data.byte_array[8];
-				bi->status.pristats[i - 1].link_stats.rx_bad =
-					(unsigned long)rcvmsg.msg_data.byte_array[12];
-			}
-		}
-
-		/*
-		 * Link stats for the D channel
-		 */
-		status = send_and_receive(card, CEPID, ceReqTypeLnk, ceReqClass0,
-					  ceReqLnkGetStats, 0, 0, NULL, &rcvmsg, SAR_TIMEOUT);
-		if (!status) {
-			bi->dch_stats.tx_good = (unsigned long)rcvmsg.msg_data.byte_array[0];
-			bi->dch_stats.tx_bad = (unsigned long)rcvmsg.msg_data.byte_array[4];
-			bi->dch_stats.rx_good = (unsigned long)rcvmsg.msg_data.byte_array[8];
-			bi->dch_stats.rx_bad = (unsigned long)rcvmsg.msg_data.byte_array[12];
-		}
-
-		return 0;
-	}
-
-	/*
-	 * If BRI or POTS, Get SPID, DN and call types for each channel
-	 */
-
-	/*
-	 * Get the link stats for the channels
-	 */
-	status = send_and_receive(card, CEPID, ceReqTypeLnk, ceReqClass0,
-				  ceReqLnkGetStats, 0, 0, NULL, &rcvmsg, SAR_TIMEOUT);
-	if (!status) {
-		bi->dch_stats.tx_good = (unsigned long)rcvmsg.msg_data.byte_array[0];
-		bi->dch_stats.tx_bad = (unsigned long)rcvmsg.msg_data.byte_array[4];
-		bi->dch_stats.rx_good = (unsigned long)rcvmsg.msg_data.byte_array[8];
-		bi->dch_stats.rx_bad = (unsigned long)rcvmsg.msg_data.byte_array[12];
-		bi->status.bristats[0].link_stats.tx_good =
-			(unsigned long)rcvmsg.msg_data.byte_array[16];
-		bi->status.bristats[0].link_stats.tx_bad =
-			(unsigned long)rcvmsg.msg_data.byte_array[20];
-		bi->status.bristats[0].link_stats.rx_good =
-			(unsigned long)rcvmsg.msg_data.byte_array[24];
-		bi->status.bristats[0].link_stats.rx_bad =
-			(unsigned long)rcvmsg.msg_data.byte_array[28];
-		bi->status.bristats[1].link_stats.tx_good =
-			(unsigned long)rcvmsg.msg_data.byte_array[32];
-		bi->status.bristats[1].link_stats.tx_bad =
-			(unsigned long)rcvmsg.msg_data.byte_array[36];
-		bi->status.bristats[1].link_stats.rx_good =
-			(unsigned long)rcvmsg.msg_data.byte_array[40];
-		bi->status.bristats[1].link_stats.rx_bad =
-			(unsigned long)rcvmsg.msg_data.byte_array[44];
-	}
-
-	/*
-	 * Get the SPIDs
-	 */
-	for (i = 0; i < BRI_CHANNELS; i++) {
-		status = send_and_receive(card, CEPID, ceReqTypeCall, ceReqClass0,
-					  ceReqCallGetSPID, i + 1, 0, NULL, &rcvmsg, SAR_TIMEOUT);
-		if (!status)
-			strcpy(bi->status.bristats[i].spid, rcvmsg.msg_data.byte_array);
-	}
-
-	/*
-	 * Get the DNs
-	 */
-	for (i = 0; i < BRI_CHANNELS; i++) {
-		status = send_and_receive(card, CEPID, ceReqTypeCall, ceReqClass0,
-					  ceReqCallGetMyNumber, i + 1, 0, NULL, &rcvmsg, SAR_TIMEOUT);
-		if (!status)
-			strcpy(bi->status.bristats[i].dn, rcvmsg.msg_data.byte_array);
-	}
-
-	return 0;
-}
diff --git a/drivers/isdn/sc/message.c b/drivers/isdn/sc/message.c
deleted file mode 100644
index 9679a1902b32..000000000000
--- a/drivers/isdn/sc/message.c
+++ /dev/null
@@ -1,230 +0,0 @@
-/* $Id: message.c,v 1.5.8.2 2001/09/23 22:24:59 kai Exp $
- *
- * functions for sending and receiving control messages
- *
- * Copyright (C) 1996  SpellCaster Telecommunications Inc.
- *
- * This software may be used and distributed according to the terms
- * of the GNU General Public License, incorporated herein by reference.
- *
- * For more information, please contact gpl-info@spellcast.com or write:
- *
- *     SpellCaster Telecommunications Inc.
- *     5621 Finch Avenue East, Unit #3
- *     Scarborough, Ontario  Canada
- *     M1B 2T9
- *     +1 (416) 297-8565
- *     +1 (416) 297-6433 Facsimile
- */
-#include <linux/sched.h>
-#include "includes.h"
-#include "hardware.h"
-#include "message.h"
-#include "card.h"
-
-/*
- * receive a message from the board
- */
-int receivemessage(int card, RspMessage *rspmsg)
-{
-	DualPortMemory *dpm;
-	unsigned long flags;
-
-	if (!IS_VALID_CARD(card)) {
-		pr_debug("Invalid param: %d is not a valid card id\n", card);
-		return -EINVAL;
-	}
-
-	pr_debug("%s: Entered receivemessage\n",
-		 sc_adapter[card]->devicename);
-
-	/*
-	 * See if there are messages waiting
-	 */
-	if (inb(sc_adapter[card]->ioport[FIFO_STATUS]) & RF_HAS_DATA) {
-		/*
-		 * Map in the DPM to the base page and copy the message
-		 */
-		spin_lock_irqsave(&sc_adapter[card]->lock, flags);
-		outb((sc_adapter[card]->shmem_magic >> 14) | 0x80,
-		     sc_adapter[card]->ioport[sc_adapter[card]->shmem_pgport]);
-		dpm = (DualPortMemory *) sc_adapter[card]->rambase;
-		memcpy_fromio(rspmsg, &(dpm->rsp_queue[dpm->rsp_tail]),
-			      MSG_LEN);
-		dpm->rsp_tail = (dpm->rsp_tail + 1) % MAX_MESSAGES;
-		inb(sc_adapter[card]->ioport[FIFO_READ]);
-		spin_unlock_irqrestore(&sc_adapter[card]->lock, flags);
-		/*
-		 * Tell the board that the message is received
-		 */
-		pr_debug("%s: Received Message seq:%d pid:%d time:%d cmd:%d "
-			 "cnt:%d (type,class,code):(%d,%d,%d) "
-			 "link:%d stat:0x%x\n",
-			 sc_adapter[card]->devicename,
-			 rspmsg->sequence_no,
-			 rspmsg->process_id,
-			 rspmsg->time_stamp,
-			 rspmsg->cmd_sequence_no,
-			 rspmsg->msg_byte_cnt,
-			 rspmsg->type,
-			 rspmsg->class,
-			 rspmsg->code,
-			 rspmsg->phy_link_no,
-			 rspmsg->rsp_status);
-
-		return 0;
-	}
-	return -ENOMSG;
-}
-
-/*
- * send a message to the board
- */
-int sendmessage(int card,
-		unsigned int procid,
-		unsigned int type,
-		unsigned int class,
-		unsigned int code,
-		unsigned int link,
-		unsigned int data_len,
-		unsigned int *data)
-{
-	DualPortMemory *dpm;
-	ReqMessage sndmsg;
-	unsigned long flags;
-
-	if (!IS_VALID_CARD(card)) {
-		pr_debug("Invalid param: %d is not a valid card id\n", card);
-		return -EINVAL;
-	}
-
-	/*
-	 * Make sure we only send CEPID messages when the engine is up
-	 * and CMPID messages when it is down
-	 */
-	if (sc_adapter[card]->EngineUp && procid == CMPID) {
-		pr_debug("%s: Attempt to send CM message with engine up\n",
-			 sc_adapter[card]->devicename);
-		return -ESRCH;
-	}
-
-	if (!sc_adapter[card]->EngineUp && procid == CEPID) {
-		pr_debug("%s: Attempt to send CE message with engine down\n",
-			 sc_adapter[card]->devicename);
-		return -ESRCH;
-	}
-
-	memset(&sndmsg, 0, MSG_LEN);
-	sndmsg.msg_byte_cnt = 4;
-	sndmsg.type = type;
-	sndmsg.class = class;
-	sndmsg.code = code;
-	sndmsg.phy_link_no = link;
-
-	if (data_len > 0) {
-		if (data_len > MSG_DATA_LEN)
-			data_len = MSG_DATA_LEN;
-		memcpy(&(sndmsg.msg_data), data, data_len);
-		sndmsg.msg_byte_cnt = data_len + 8;
-	}
-
-	sndmsg.process_id = procid;
-	sndmsg.sequence_no = sc_adapter[card]->seq_no++ % 256;
-
-	/*
-	 * wait for an empty slot in the queue
-	 */
-	while (!(inb(sc_adapter[card]->ioport[FIFO_STATUS]) & WF_NOT_FULL))
-		udelay(1);
-
-	/*
-	 * Disable interrupts and map in shared memory
-	 */
-	spin_lock_irqsave(&sc_adapter[card]->lock, flags);
-	outb((sc_adapter[card]->shmem_magic >> 14) | 0x80,
-	     sc_adapter[card]->ioport[sc_adapter[card]->shmem_pgport]);
-	dpm = (DualPortMemory *) sc_adapter[card]->rambase;	/* Fix me */
-	memcpy_toio(&(dpm->req_queue[dpm->req_head]), &sndmsg, MSG_LEN);
-	dpm->req_head = (dpm->req_head + 1) % MAX_MESSAGES;
-	outb(sndmsg.sequence_no, sc_adapter[card]->ioport[FIFO_WRITE]);
-	spin_unlock_irqrestore(&sc_adapter[card]->lock, flags);
-
-	pr_debug("%s: Sent Message seq:%d pid:%d time:%d "
-		 "cnt:%d (type,class,code):(%d,%d,%d) "
-		 "link:%d\n ",
-		 sc_adapter[card]->devicename,
-		 sndmsg.sequence_no,
-		 sndmsg.process_id,
-		 sndmsg.time_stamp,
-		 sndmsg.msg_byte_cnt,
-		 sndmsg.type,
-		 sndmsg.class,
-		 sndmsg.code,
-		 sndmsg.phy_link_no);
-
-	return 0;
-}
-
-int send_and_receive(int card,
-		     unsigned int procid,
-		     unsigned char type,
-		     unsigned char class,
-		     unsigned char code,
-		     unsigned char link,
-		     unsigned char data_len,
-		     unsigned char *data,
-		     RspMessage *mesgdata,
-		     int timeout)
-{
-	int retval;
-	int tries;
-
-	if (!IS_VALID_CARD(card)) {
-		pr_debug("Invalid param: %d is not a valid card id\n", card);
-		return -EINVAL;
-	}
-
-	sc_adapter[card]->want_async_messages = 1;
-	retval = sendmessage(card, procid, type, class, code, link,
-			     data_len, (unsigned int *) data);
-
-	if (retval) {
-		pr_debug("%s: SendMessage failed in SAR\n",
-			 sc_adapter[card]->devicename);
-		sc_adapter[card]->want_async_messages = 0;
-		return -EIO;
-	}
-
-	tries = 0;
-	/* wait for the response */
-	while (tries < timeout) {
-		schedule_timeout_interruptible(1);
-
-		pr_debug("SAR waiting..\n");
-
-		/*
-		 * See if we got our message back
-		 */
-		if ((sc_adapter[card]->async_msg.type == type) &&
-		    (sc_adapter[card]->async_msg.class == class) &&
-		    (sc_adapter[card]->async_msg.code == code) &&
-		    (sc_adapter[card]->async_msg.phy_link_no == link)) {
-
-			/*
-			 * Got it!
-			 */
-			pr_debug("%s: Got ASYNC message\n",
-				 sc_adapter[card]->devicename);
-			memcpy(mesgdata, &(sc_adapter[card]->async_msg),
-			       sizeof(RspMessage));
-			sc_adapter[card]->want_async_messages = 0;
-			return 0;
-		}
-
-		tries++;
-	}
-
-	pr_debug("%s: SAR message timeout\n", sc_adapter[card]->devicename);
-	sc_adapter[card]->want_async_messages = 0;
-	return -ETIME;
-}
diff --git a/drivers/isdn/sc/message.h b/drivers/isdn/sc/message.h
deleted file mode 100644
index 5e6f4a5c15f8..000000000000
--- a/drivers/isdn/sc/message.h
+++ /dev/null
@@ -1,245 +0,0 @@
-/* $Id: message.h,v 1.1.10.1 2001/09/23 22:24:59 kai Exp $
- *
- * Copyright (C) 1996  SpellCaster Telecommunications Inc.
- *
- * structures, macros and defines useful for sending
- * messages to the adapter
- *
- * This software may be used and distributed according to the terms
- * of the GNU General Public License, incorporated herein by reference.
- *
- * For more information, please contact gpl-info@spellcast.com or write:
- *
- *     SpellCaster Telecommunications Inc.
- *     5621 Finch Avenue East, Unit #3
- *     Scarborough, Ontario  Canada
- *     M1B 2T9
- *     +1 (416) 297-8565
- *     +1 (416) 297-6433 Facsimile
- */
-
-/*
- * Board message macros, defines and structures
- */
-
-#ifndef MESSAGE_H
-#define MESSAGE_H
-
-#define MAX_MESSAGES		32	/* Maximum messages that can be
-					   queued */
-#define MSG_DATA_LEN		48	/* Maximum size of message payload */
-#define MSG_LEN			64	/* Size of a message */
-#define CMPID			0	/* Loader message process ID */
-#define CEPID			64	/* Firmware message process ID */
-
-/*
- * Macro to determine if a message is a loader message
- */
-#define IS_CM_MESSAGE(mesg, tx, cx, dx)		\
-	((mesg.type == cmRspType##tx)		\
-	 && (mesg.class == cmRspClass##cx)	\
-	 && (mesg.code == cmRsp##dx))
-
-/*
- * Macro to determine if a message is a firmware message
- */
-#define IS_CE_MESSAGE(mesg, tx, cx, dx)		\
-	((mesg.type == ceRspType##tx)		\
-	 && (mesg.class == ceRspClass##cx)	\
-	 && (mesg.code == ceRsp##tx##dx))
-
-/*
- * Loader Request and Response Messages
- */
-
-/* message types */
-#define cmReqType1			1
-#define cmReqType2			2
-#define cmRspType0			0
-#define cmRspType1			1
-#define cmRspType2			2
-#define cmRspType5			5
-
-/* message classes */
-#define cmReqClass0			0
-#define cmRspClass0			0
-
-/* message codes */
-#define cmReqHWConfig		1			/* 1,0,1 */
-#define cmReqMsgLpbk		2			/* 1,0,2 */
-#define cmReqVersion		3			/* 1,0,3 */
-#define cmReqLoadProc		1			/* 2,0,1 */
-#define cmReqStartProc		2			/* 2,0,2 */
-#define cmReqReadMem		6			/* 2,0,6 */
-#define cmRspHWConfig		cmReqHWConfig
-#define	cmRspMsgLpbk		cmReqMsgLpbk
-#define cmRspVersion		cmReqVersion
-#define cmRspLoadProc		cmReqLoadProc
-#define cmRspStartProc		cmReqStartProc
-#define	cmRspReadMem		cmReqReadMem
-#define cmRspMiscEngineUp	1			/* 5,0,1 */
-#define cmRspInvalid		0			/* 0,0,0 */
-
-
-/*
- * Firmware Request and Response Messages
- */
-
-/* message types */
-#define ceReqTypePhy		1
-#define ceReqTypeLnk		2
-#define ceReqTypeCall		3
-#define ceReqTypeStat		1
-#define ceRspTypeErr		0
-#define	ceRspTypePhy		ceReqTypePhy
-#define ceRspTypeLnk		ceReqTypeLnk
-#define ceRspTypeCall		ceReqTypeCall
-#define ceRspTypeStat		ceReqTypeStat
-
-/* message classes */
-#define ceReqClass0		0
-#define ceReqClass1		1
-#define ceReqClass2		2
-#define ceReqClass3		3
-#define ceRspClass0		ceReqClass0
-#define ceRspClass1		ceReqClass1
-#define ceRspClass2		ceReqClass2
-#define ceRspClass3		ceReqClass3
-
-/* message codes  (B) = BRI only, (P) = PRI only, (V) = POTS only */
-#define ceReqPhyProcInfo	1			/* 1,0,1 */
-#define ceReqPhyConnect		1			/* 1,1,1 */
-#define ceReqPhyDisconnect	2			/* 1,1,2 */
-#define ceReqPhySetParams	3			/* 1,1,3 (P) */
-#define ceReqPhyGetParams	4			/* 1,1,4 (P) */
-#define ceReqPhyStatus		1			/* 1,2,1 */
-#define ceReqPhyAcfaStatus	2			/* 1,2,2 (P) */
-#define ceReqPhyChCallState	3			/* 1,2,3 (P) */
-#define ceReqPhyChServState	4			/* 1,2,4 (P) */
-#define ceReqPhyRLoopBack	1			/* 1,3,1 */
-#define ceRspPhyProcInfo	ceReqPhyProcInfo
-#define	ceRspPhyConnect		ceReqPhyConnect
-#define ceRspPhyDisconnect	ceReqPhyDisconnect
-#define ceRspPhySetParams	ceReqPhySetParams
-#define ceRspPhyGetParams	ceReqPhyGetParams
-#define ceRspPhyStatus		ceReqPhyStatus
-#define ceRspPhyAcfaStatus	ceReqPhyAcfaStatus
-#define ceRspPhyChCallState	ceReqPhyChCallState
-#define ceRspPhyChServState	ceReqPhyChServState
-#define ceRspPhyRLoopBack	ceReqphyRLoopBack
-#define ceReqLnkSetParam	1			/* 2,0,1 */
-#define ceReqLnkGetParam	2			/* 2,0,2 */
-#define ceReqLnkGetStats	3			/* 2,0,3 */
-#define ceReqLnkWrite		1			/* 2,1,1 */
-#define ceReqLnkRead		2			/* 2,1,2 */
-#define ceReqLnkFlush		3			/* 2,1,3 */
-#define ceReqLnkWrBufTrc	4			/* 2,1,4 */
-#define ceReqLnkRdBufTrc	5			/* 2,1,5 */
-#define ceRspLnkSetParam	ceReqLnkSetParam
-#define ceRspLnkGetParam	ceReqLnkGetParam
-#define ceRspLnkGetStats	ceReqLnkGetStats
-#define ceRspLnkWrite		ceReqLnkWrite
-#define ceRspLnkRead		ceReqLnkRead
-#define ceRspLnkFlush		ceReqLnkFlush
-#define ceRspLnkWrBufTrc	ceReqLnkWrBufTrc
-#define ceRspLnkRdBufTrc	ceReqLnkRdBufTrc
-#define ceReqCallSetSwitchType	1			/* 3,0,1 */
-#define ceReqCallGetSwitchType	2			/* 3,0,2 */
-#define ceReqCallSetFrameFormat	3			/* 3,0,3 */
-#define ceReqCallGetFrameFormat	4			/* 3,0,4 */
-#define ceReqCallSetCallType	5			/* 3,0,5 */
-#define ceReqCallGetCallType	6			/* 3,0,6 */
-#define ceReqCallSetSPID	7			/* 3,0,7 (!P) */
-#define ceReqCallGetSPID	8			/* 3,0,8 (!P) */
-#define ceReqCallSetMyNumber	9			/* 3,0,9 (!P) */
-#define ceReqCallGetMyNumber	10			/* 3,0,10 (!P) */
-#define	ceRspCallSetSwitchType	ceReqCallSetSwitchType
-#define ceRspCallGetSwitchType	ceReqCallSetSwitchType
-#define ceRspCallSetFrameFormat	ceReqCallSetFrameFormat
-#define ceRspCallGetFrameFormat	ceReqCallGetFrameFormat
-#define ceRspCallSetCallType	ceReqCallSetCallType
-#define ceRspCallGetCallType	ceReqCallGetCallType
-#define ceRspCallSetSPID	ceReqCallSetSPID
-#define ceRspCallGetSPID	ceReqCallGetSPID
-#define ceRspCallSetMyNumber	ceReqCallSetMyNumber
-#define ceRspCallGetMyNumber	ceReqCallGetMyNumber
-#define ceRspStatAcfaStatus	2
-#define ceRspStat
-#define ceRspErrError		0			/* 0,0,0 */
-
-/*
- * Call Types
- */
-#define CALLTYPE_64K		0
-#define CALLTYPE_56K		1
-#define CALLTYPE_SPEECH		2
-#define CALLTYPE_31KHZ		3
-
-/*
- * Link Level data contains a pointer to and the length of
- * a buffer in shared RAM. Used by LnkRead and LnkWrite message
- * types. Part of RspMsgStruct and ReqMsgStruct.
- */
-typedef struct {
-	unsigned long buff_offset;
-	unsigned short msg_len;
-} LLData;
-
-
-/*
- * Message payload template for an HWConfig message
- */
-typedef struct {
-	char st_u_sense;
-	char powr_sense;
-	char sply_sense;
-	unsigned char asic_id;
-	long ram_size;
-	char serial_no[13];
-	char part_no[13];
-	char rev_no[2];
-} HWConfig_pl;
-
-/*
- * A Message
- */
-struct message {
-	unsigned char sequence_no;
-	unsigned char process_id;
-	unsigned char time_stamp;
-	unsigned char cmd_sequence_no;	/* Rsp messages only */
-	unsigned char reserved1[3];
-	unsigned char msg_byte_cnt;
-	unsigned char type;
-	unsigned char class;
-	unsigned char code;
-	unsigned char phy_link_no;
-	unsigned char rsp_status;	/* Rsp messages only */
-	unsigned char reseved2[3];
-	union {
-		unsigned char byte_array[MSG_DATA_LEN];
-		LLData response;
-		HWConfig_pl HWCresponse;
-	} msg_data;
-};
-
-typedef struct message ReqMessage;	/* Request message */
-typedef struct message RspMessage;	/* Response message */
-
-/*
- * The first 5010 bytes of shared memory contain the message queues,
- * indexes and other data. This structure is its template
- */
-typedef struct {
-	volatile ReqMessage req_queue[MAX_MESSAGES];
-	volatile RspMessage rsp_queue[MAX_MESSAGES];
-	volatile unsigned char req_head;
-	volatile unsigned char req_tail;
-	volatile unsigned char rsp_head;
-	volatile unsigned char rsp_tail;
-	volatile unsigned long signature;
-	volatile unsigned long trace_enable;
-	volatile unsigned char reserved[4];
-} DualPortMemory;
-
-#endif
diff --git a/drivers/isdn/sc/packet.c b/drivers/isdn/sc/packet.c
deleted file mode 100644
index 2446957085e0..000000000000
--- a/drivers/isdn/sc/packet.c
+++ /dev/null
@@ -1,204 +0,0 @@
-/* $Id: packet.c,v 1.5.8.1 2001/09/23 22:24:59 kai Exp $
- *
- * Copyright (C) 1996  SpellCaster Telecommunications Inc.
- *
- * This software may be used and distributed according to the terms
- * of the GNU General Public License, incorporated herein by reference.
- *
- * For more information, please contact gpl-info@spellcast.com or write:
- *
- *     SpellCaster Telecommunications Inc.
- *     5621 Finch Avenue East, Unit #3
- *     Scarborough, Ontario  Canada
- *     M1B 2T9
- *     +1 (416) 297-8565
- *     +1 (416) 297-6433 Facsimile
- */
-
-#include "includes.h"
-#include "hardware.h"
-#include "message.h"
-#include "card.h"
-
-int sndpkt(int devId, int channel, int ack, struct sk_buff *data)
-{
-	LLData	ReqLnkWrite;
-	int status;
-	int card;
-	unsigned long len;
-
-	card = get_card_from_id(devId);
-
-	if (!IS_VALID_CARD(card)) {
-		pr_debug("invalid param: %d is not a valid card id\n", card);
-		return -ENODEV;
-	}
-
-	pr_debug("%s: sndpkt: frst = 0x%lx nxt = %d  f = %d n = %d\n",
-		 sc_adapter[card]->devicename,
-		 sc_adapter[card]->channel[channel].first_sendbuf,
-		 sc_adapter[card]->channel[channel].next_sendbuf,
-		 sc_adapter[card]->channel[channel].free_sendbufs,
-		 sc_adapter[card]->channel[channel].num_sendbufs);
-
-	if (!sc_adapter[card]->channel[channel].free_sendbufs) {
-		pr_debug("%s: out of TX buffers\n",
-			 sc_adapter[card]->devicename);
-		return -EINVAL;
-	}
-
-	if (data->len > BUFFER_SIZE) {
-		pr_debug("%s: data overflows buffer size (data > buffer)\n",
-			 sc_adapter[card]->devicename);
-		return -EINVAL;
-	}
-
-	ReqLnkWrite.buff_offset = sc_adapter[card]->channel[channel].next_sendbuf *
-		BUFFER_SIZE + sc_adapter[card]->channel[channel].first_sendbuf;
-	ReqLnkWrite.msg_len = data->len; /* sk_buff size */
-	pr_debug("%s: writing %d bytes to buffer offset 0x%lx\n",
-		 sc_adapter[card]->devicename,
-		 ReqLnkWrite.msg_len, ReqLnkWrite.buff_offset);
-	memcpy_toshmem(card, (char *)ReqLnkWrite.buff_offset, data->data, ReqLnkWrite.msg_len);
-
-	/*
-	 * sendmessage
-	 */
-	pr_debug("%s: sndpkt size=%d, buf_offset=0x%lx buf_indx=%d\n",
-		 sc_adapter[card]->devicename,
-		 ReqLnkWrite.msg_len, ReqLnkWrite.buff_offset,
-		 sc_adapter[card]->channel[channel].next_sendbuf);
-
-	status = sendmessage(card, CEPID, ceReqTypeLnk, ceReqClass1, ceReqLnkWrite,
-			     channel + 1, sizeof(LLData), (unsigned int *)&ReqLnkWrite);
-	len = data->len;
-	if (status) {
-		pr_debug("%s: failed to send packet, status = %d\n",
-			 sc_adapter[card]->devicename, status);
-		return -1;
-	}
-	else {
-		sc_adapter[card]->channel[channel].free_sendbufs--;
-		sc_adapter[card]->channel[channel].next_sendbuf =
-			++sc_adapter[card]->channel[channel].next_sendbuf ==
-			sc_adapter[card]->channel[channel].num_sendbufs ? 0 :
-			sc_adapter[card]->channel[channel].next_sendbuf;
-		pr_debug("%s: packet sent successfully\n", sc_adapter[card]->devicename);
-		dev_kfree_skb(data);
-		indicate_status(card, ISDN_STAT_BSENT, channel, (char *)&len);
-	}
-	return len;
-}
-
-void rcvpkt(int card, RspMessage *rcvmsg)
-{
-	LLData newll;
-	struct sk_buff *skb;
-
-	if (!IS_VALID_CARD(card)) {
-		pr_debug("invalid param: %d is not a valid card id\n", card);
-		return;
-	}
-
-	switch (rcvmsg->rsp_status) {
-	case 0x01:
-	case 0x02:
-	case 0x70:
-		pr_debug("%s: error status code: 0x%x\n",
-			 sc_adapter[card]->devicename, rcvmsg->rsp_status);
-		return;
-	case 0x00:
-		if (!(skb = dev_alloc_skb(rcvmsg->msg_data.response.msg_len))) {
-			printk(KERN_WARNING "%s: rcvpkt out of memory, dropping packet\n",
-			       sc_adapter[card]->devicename);
-			return;
-		}
-		skb_put(skb, rcvmsg->msg_data.response.msg_len);
-		pr_debug("%s: getting data from offset: 0x%lx\n",
-			 sc_adapter[card]->devicename,
-			 rcvmsg->msg_data.response.buff_offset);
-		memcpy_fromshmem(card,
-				 skb_put(skb, rcvmsg->msg_data.response.msg_len),
-				 (char *)rcvmsg->msg_data.response.buff_offset,
-				 rcvmsg->msg_data.response.msg_len);
-		sc_adapter[card]->card->rcvcallb_skb(sc_adapter[card]->driverId,
-						     rcvmsg->phy_link_no - 1, skb);
-
-	case 0x03:
-		/*
-		 * Recycle the buffer
-		 */
-		pr_debug("%s: buffer size : %d\n",
-			 sc_adapter[card]->devicename, BUFFER_SIZE);
-/*		memset_shmem(card, rcvmsg->msg_data.response.buff_offset, 0, BUFFER_SIZE); */
-		newll.buff_offset = rcvmsg->msg_data.response.buff_offset;
-		newll.msg_len = BUFFER_SIZE;
-		pr_debug("%s: recycled buffer at offset 0x%lx size %d\n",
-			 sc_adapter[card]->devicename,
-			 newll.buff_offset, newll.msg_len);
-		sendmessage(card, CEPID, ceReqTypeLnk, ceReqClass1, ceReqLnkRead,
-			    rcvmsg->phy_link_no, sizeof(LLData), (unsigned int *)&newll);
-	}
-
-}
-
-int setup_buffers(int card, int c)
-{
-	unsigned int nBuffers, i, cBase;
-	unsigned int buffer_size;
-	LLData	RcvBuffOffset;
-
-	if (!IS_VALID_CARD(card)) {
-		pr_debug("invalid param: %d is not a valid card id\n", card);
-		return -ENODEV;
-	}
-
-	/*
-	 * Calculate the buffer offsets (send/recv/send/recv)
-	 */
-	pr_debug("%s: setting up channel buffer space in shared RAM\n",
-		 sc_adapter[card]->devicename);
-	buffer_size = BUFFER_SIZE;
-	nBuffers = ((sc_adapter[card]->ramsize - BUFFER_BASE) / buffer_size) / 2;
-	nBuffers = nBuffers > BUFFERS_MAX ? BUFFERS_MAX : nBuffers;
-	pr_debug("%s: calculating buffer space: %d buffers, %d big\n",
-		 sc_adapter[card]->devicename,
-		 nBuffers, buffer_size);
-	if (nBuffers < 2) {
-		pr_debug("%s: not enough buffer space\n",
-			 sc_adapter[card]->devicename);
-		return -1;
-	}
-	cBase = (nBuffers * buffer_size) * (c - 1);
-	pr_debug("%s: channel buffer offset from shared RAM: 0x%x\n",
-		 sc_adapter[card]->devicename, cBase);
-	sc_adapter[card]->channel[c - 1].first_sendbuf = BUFFER_BASE + cBase;
-	sc_adapter[card]->channel[c - 1].num_sendbufs = nBuffers / 2;
-	sc_adapter[card]->channel[c - 1].free_sendbufs = nBuffers / 2;
-	sc_adapter[card]->channel[c - 1].next_sendbuf = 0;
-	pr_debug("%s: send buffer setup complete: first=0x%lx n=%d f=%d, nxt=%d\n",
-		 sc_adapter[card]->devicename,
-		 sc_adapter[card]->channel[c - 1].first_sendbuf,
-		 sc_adapter[card]->channel[c - 1].num_sendbufs,
-		 sc_adapter[card]->channel[c - 1].free_sendbufs,
-		 sc_adapter[card]->channel[c - 1].next_sendbuf);
-
-	/*
-	 * Prep the receive buffers
-	 */
-	pr_debug("%s: adding %d RecvBuffers:\n",
-		 sc_adapter[card]->devicename, nBuffers / 2);
-	for (i = 0; i < nBuffers / 2; i++) {
-		RcvBuffOffset.buff_offset =
-			((sc_adapter[card]->channel[c - 1].first_sendbuf +
-			  (nBuffers / 2) * buffer_size) + (buffer_size * i));
-		RcvBuffOffset.msg_len = buffer_size;
-		pr_debug("%s: adding RcvBuffer #%d offset=0x%lx sz=%d bufsz:%d\n",
-			 sc_adapter[card]->devicename,
-			 i + 1, RcvBuffOffset.buff_offset,
-			 RcvBuffOffset.msg_len, buffer_size);
-		sendmessage(card, CEPID, ceReqTypeLnk, ceReqClass1, ceReqLnkRead,
-			    c, sizeof(LLData), (unsigned int *)&RcvBuffOffset);
-	}
-	return 0;
-}
diff --git a/drivers/isdn/sc/scioc.h b/drivers/isdn/sc/scioc.h
deleted file mode 100644
index a50e143779e7..000000000000
--- a/drivers/isdn/sc/scioc.h
+++ /dev/null
@@ -1,110 +0,0 @@
-#ifndef __ISDN_SC_SCIOC_H__
-#define __ISDN_SC_SCIOC_H__
-
-/*
- * This software may be used and distributed according to the terms
- * of the GNU General Public License, incorporated herein by reference.
- */
-
-/*
- * IOCTL Command Codes
- */
-#define SCIOCLOAD	0x01	/* Load a firmware record */
-#define SCIOCRESET	0x02	/* Perform hard reset */
-#define SCIOCDEBUG	0x03	/* Set debug level */
-#define SCIOCREV	0x04	/* Get driver revision(s) */
-#define SCIOCSTART	0x05	/* Start the firmware */
-#define SCIOCGETSWITCH	0x06	/* Get switch type */
-#define SCIOCSETSWITCH	0x07	/* Set switch type */
-#define SCIOCGETSPID	0x08	/* Get channel SPID */
-#define SCIOCSETSPID	0x09	/* Set channel SPID */
-#define SCIOCGETDN	0x0A	/* Get channel DN */
-#define SCIOCSETDN	0x0B	/* Set channel DN */
-#define SCIOCTRACE	0x0C	/* Toggle trace mode */
-#define SCIOCSTAT	0x0D	/* Get line status */
-#define SCIOCGETSPEED	0x0E	/* Set channel speed */
-#define SCIOCSETSPEED	0x0F	/* Set channel speed */
-#define SCIOCLOOPTST	0x10	/* Perform loopback test */
-
-typedef struct {
-	int device;
-	int channel;
-	unsigned long command;
-	void __user *dataptr;
-} scs_ioctl;
-
-/* Size of strings */
-#define SCIOC_SPIDSIZE		49
-#define SCIOC_DNSIZE		SCIOC_SPIDSIZE
-#define SCIOC_REVSIZE		SCIOC_SPIDSIZE
-#define SCIOC_SRECSIZE		49
-
-typedef struct {
-	unsigned long tx_good;
-	unsigned long tx_bad;
-	unsigned long rx_good;
-	unsigned long rx_bad;
-} ChLinkStats;
-
-typedef struct {
-	char spid[49];
-	char dn[49];
-	char call_type;
-	char phy_stat;
-	ChLinkStats link_stats;
-} BRIStat;
-
-typedef BRIStat POTStat;
-
-typedef struct {
-	char call_type;
-	char call_state;
-	char serv_state;
-	char phy_stat;
-	ChLinkStats link_stats;
-} PRIStat;
-
-typedef char PRIInfo;
-typedef char BRIInfo;
-typedef char POTInfo;
-
-
-typedef struct {
-	char acfa_nos;
-	char acfa_ais;
-	char acfa_los;
-	char acfa_rra;
-	char acfa_slpp;
-	char acfa_slpn;
-	char acfa_fsrf;
-} ACFAStat;
-
-typedef struct {
-	unsigned char modelid;
-	char serial_no[13];
-	char part_no[13];
-	char load_ver[11];
-	char proc_ver[11];
-	int iobase;
-	long rambase;
-	char irq;
-	long ramsize;
-	char interface;
-	char switch_type;
-	char l1_status;
-	char l2_status;
-	ChLinkStats dch_stats;
-	ACFAStat AcfaStats;
-	union {
-		PRIStat pristats[23];
-		BRIStat bristats[2];
-		POTStat potsstats[2];
-	} status;
-	union {
-		PRIInfo priinfo;
-		BRIInfo briinfo;
-		POTInfo potsinfo;
-	} info;
-} boardInfo;
-
-#endif  /*  __ISDN_SC_SCIOC_H__  */
diff --git a/drivers/isdn/sc/shmem.c b/drivers/isdn/sc/shmem.c
deleted file mode 100644
index d24506ceb6e8..000000000000
--- a/drivers/isdn/sc/shmem.c
+++ /dev/null
@@ -1,138 +0,0 @@
-/* $Id: shmem.c,v 1.2.10.1 2001/09/23 22:24:59 kai Exp $
- *
- * Copyright (C) 1996  SpellCaster Telecommunications Inc.
- *
- * Card functions implementing ISDN4Linux functionality
- *
- * This software may be used and distributed according to the terms
- * of the GNU General Public License, incorporated herein by reference.
- *
- * For more information, please contact gpl-info@spellcast.com or write:
- *
- *     SpellCaster Telecommunications Inc.
- *     5621 Finch Avenue East, Unit #3
- *     Scarborough, Ontario  Canada
- *     M1B 2T9
- *     +1 (416) 297-8565
- *     +1 (416) 297-6433 Facsimile
- */
-
-#include "includes.h"		/* This must be first */
-#include "hardware.h"
-#include "card.h"
-
-/*
- *
- */
-void memcpy_toshmem(int card, void *dest, const void *src, size_t n)
-{
-	unsigned long flags;
-	unsigned char ch;
-	unsigned long dest_rem = ((unsigned long) dest) % 0x4000;
-
-	if (!IS_VALID_CARD(card)) {
-		pr_debug("Invalid param: %d is not a valid card id\n", card);
-		return;
-	}
-
-	if (n > SRAM_PAGESIZE)
-		return;
-
-	/*
-	 * determine the page to load from the address
-	 */
-	ch = (unsigned long) dest / SRAM_PAGESIZE;
-	pr_debug("%s: loaded page %d\n", sc_adapter[card]->devicename, ch);
-	/*
-	 * Block interrupts and load the page
-	 */
-	spin_lock_irqsave(&sc_adapter[card]->lock, flags);
-
-	outb(((sc_adapter[card]->shmem_magic + ch * SRAM_PAGESIZE) >> 14) | 0x80,
-	     sc_adapter[card]->ioport[sc_adapter[card]->shmem_pgport]);
-	memcpy_toio((void __iomem *)(sc_adapter[card]->rambase + dest_rem), src, n);
-	spin_unlock_irqrestore(&sc_adapter[card]->lock, flags);
-	pr_debug("%s: set page to %#x\n", sc_adapter[card]->devicename,
-		 ((sc_adapter[card]->shmem_magic + ch * SRAM_PAGESIZE) >> 14) | 0x80);
-	pr_debug("%s: copying %zu bytes from %#lx to %#lx\n",
-		 sc_adapter[card]->devicename, n,
-		 (unsigned long) src,
-		 sc_adapter[card]->rambase + ((unsigned long) dest % 0x4000));
-}
-
-/*
- * Reverse of above
- */
-void memcpy_fromshmem(int card, void *dest, const void *src, size_t n)
-{
-	unsigned long flags;
-	unsigned char ch;
-
-	if (!IS_VALID_CARD(card)) {
-		pr_debug("Invalid param: %d is not a valid card id\n", card);
-		return;
-	}
-
-	if (n > SRAM_PAGESIZE) {
-		return;
-	}
-
-	/*
-	 * determine the page to load from the address
-	 */
-	ch = (unsigned long) src / SRAM_PAGESIZE;
-	pr_debug("%s: loaded page %d\n", sc_adapter[card]->devicename, ch);
-
-
-	/*
-	 * Block interrupts and load the page
-	 */
-	spin_lock_irqsave(&sc_adapter[card]->lock, flags);
-
-	outb(((sc_adapter[card]->shmem_magic + ch * SRAM_PAGESIZE) >> 14) | 0x80,
-	     sc_adapter[card]->ioport[sc_adapter[card]->shmem_pgport]);
-	memcpy_fromio(dest, (void *)(sc_adapter[card]->rambase +
-				     ((unsigned long) src % 0x4000)), n);
-	spin_unlock_irqrestore(&sc_adapter[card]->lock, flags);
-	pr_debug("%s: set page to %#x\n", sc_adapter[card]->devicename,
-		 ((sc_adapter[card]->shmem_magic + ch * SRAM_PAGESIZE) >> 14) | 0x80);
-/*	pr_debug("%s: copying %d bytes from %#x to %#x\n",
-	sc_adapter[card]->devicename, n,
-	sc_adapter[card]->rambase + ((unsigned long) src %0x4000), (unsigned long) dest); */
-}
-
-#if 0
-void memset_shmem(int card, void *dest, int c, size_t n)
-{
-	unsigned long flags;
-	unsigned char ch;
-
-	if (!IS_VALID_CARD(card)) {
-		pr_debug("Invalid param: %d is not a valid card id\n", card);
-		return;
-	}
-
-	if (n > SRAM_PAGESIZE) {
-		return;
-	}
-
-	/*
-	 * determine the page to load from the address
-	 */
-	ch = (unsigned long) dest / SRAM_PAGESIZE;
-	pr_debug("%s: loaded page %d\n", sc_adapter[card]->devicename, ch);
-
-	/*
-	 * Block interrupts and load the page
-	 */
-	spin_lock_irqsave(&sc_adapter[card]->lock, flags);
-
-	outb(((sc_adapter[card]->shmem_magic + ch * SRAM_PAGESIZE) >> 14) | 0x80,
-	     sc_adapter[card]->ioport[sc_adapter[card]->shmem_pgport]);
-	memset_io(sc_adapter[card]->rambase +
-		  ((unsigned long) dest % 0x4000), c, n);
-	pr_debug("%s: set page to %#x\n", sc_adapter[card]->devicename,
-		 ((sc_adapter[card]->shmem_magic + ch * SRAM_PAGESIZE) >> 14) | 0x80);
-	spin_unlock_irqrestore(&sc_adapter[card]->lock, flags);
-}
-#endif  /*  0  */
diff --git a/drivers/isdn/sc/timer.c b/drivers/isdn/sc/timer.c
deleted file mode 100644
index 6fbac2230d7e..000000000000
--- a/drivers/isdn/sc/timer.c
+++ /dev/null
@@ -1,122 +0,0 @@
-/* $Id: timer.c,v 1.3.6.1 2001/09/23 22:24:59 kai Exp $
- *
- * Copyright (C) 1996  SpellCaster Telecommunications Inc.
- *
- * This software may be used and distributed according to the terms
- * of the GNU General Public License, incorporated herein by reference.
- *
- * For more information, please contact gpl-info@spellcast.com or write:
- *
- *     SpellCaster Telecommunications Inc.
- *     5621 Finch Avenue East, Unit #3
- *     Scarborough, Ontario  Canada
- *     M1B 2T9
- *     +1 (416) 297-8565
- *     +1 (416) 297-6433 Facsimile
- */
-
-#include "includes.h"
-#include "hardware.h"
-#include "message.h"
-#include "card.h"
-
-
-/*
- * Write the proper values into the I/O ports following a reset
- */
-static void setup_ports(int card)
-{
-
-	outb((sc_adapter[card]->rambase >> 12), sc_adapter[card]->ioport[EXP_BASE]);
-
-	/* And the IRQ */
-	outb((sc_adapter[card]->interrupt | 0x80),
-	     sc_adapter[card]->ioport[IRQ_SELECT]);
-}
-
-/*
- * Timed function to check the status of a previous reset
- * Must be very fast as this function runs in the context of
- * an interrupt handler.
- *
- * Setup the ioports for the board that were cleared by the reset.
- * Then, check to see if the signate has been set. Next, set the
- * signature to a known value and issue a startproc if needed.
- */
-void sc_check_reset(unsigned long data)
-{
-	unsigned long flags;
-	unsigned long sig;
-	int card = (unsigned int) data;
-
-	pr_debug("%s: check_timer timer called\n",
-		 sc_adapter[card]->devicename);
-
-	/* Setup the io ports */
-	setup_ports(card);
-
-	spin_lock_irqsave(&sc_adapter[card]->lock, flags);
-	outb(sc_adapter[card]->ioport[sc_adapter[card]->shmem_pgport],
-	     (sc_adapter[card]->shmem_magic >> 14) | 0x80);
-	sig = (unsigned long) *((unsigned long *)(sc_adapter[card]->rambase + SIG_OFFSET));
-
-	/* check the signature */
-	if (sig == SIGNATURE) {
-		flushreadfifo(card);
-		spin_unlock_irqrestore(&sc_adapter[card]->lock, flags);
-		/* See if we need to do a startproc */
-		if (sc_adapter[card]->StartOnReset)
-			startproc(card);
-	} else  {
-		pr_debug("%s: No signature yet, waiting another %lu jiffies.\n",
-			 sc_adapter[card]->devicename, CHECKRESET_TIME);
-		mod_timer(&sc_adapter[card]->reset_timer, jiffies + CHECKRESET_TIME);
-		spin_unlock_irqrestore(&sc_adapter[card]->lock, flags);
-	}
-}
-
-/*
- * Timed function to check the status of a previous reset
- * Must be very fast as this function runs in the context of
- * an interrupt handler.
- *
- * Send check sc_adapter->phystat to see if the channels are up
- * If they are, tell ISDN4Linux that the board is up. If not,
- * tell IADN4Linux that it is up. Always reset the timer to
- * fire again (endless loop).
- */
-void check_phystat(unsigned long data)
-{
-	unsigned long flags;
-	int card = (unsigned int) data;
-
-	pr_debug("%s: Checking status...\n", sc_adapter[card]->devicename);
-	/*
-	 * check the results of the last PhyStat and change only if
-	 * has changed drastically
-	 */
-	if (sc_adapter[card]->nphystat && !sc_adapter[card]->phystat) {   /* All is well */
-		pr_debug("PhyStat transition to RUN\n");
-		pr_info("%s: Switch contacted, transmitter enabled\n",
-			sc_adapter[card]->devicename);
-		indicate_status(card, ISDN_STAT_RUN, 0, NULL);
-	}
-	else if (!sc_adapter[card]->nphystat && sc_adapter[card]->phystat) {   /* All is not well */
-		pr_debug("PhyStat transition to STOP\n");
-		pr_info("%s: Switch connection lost, transmitter disabled\n",
-			sc_adapter[card]->devicename);
-
-		indicate_status(card, ISDN_STAT_STOP, 0, NULL);
-	}
-
-	sc_adapter[card]->phystat = sc_adapter[card]->nphystat;
-
-	/* Reinitialize the timer */
-	spin_lock_irqsave(&sc_adapter[card]->lock, flags);
-	mod_timer(&sc_adapter[card]->stat_timer, jiffies + CHECKSTAT_TIME);
-	spin_unlock_irqrestore(&sc_adapter[card]->lock, flags);
-
-	/* Send a new cePhyStatus message */
-	sendmessage(card, CEPID, ceReqTypePhy, ceReqClass2,
-		    ceReqPhyStatus, 0, 0, NULL);
-}