diff options
| author | Paul Mundt <lethal@linux-sh.org> | 2010-01-26 12:58:40 +0900 |
|---|---|---|
| committer | Paul Mundt <lethal@linux-sh.org> | 2010-01-26 12:58:40 +0900 |
| commit | 9d56dd3b083a3bec56e9da35ce07baca81030b03 (patch) | |
| tree | a9df9d514fbc32defc1ca8a6d7c2795f15b8a128 /arch/sh/boards/mach-se/7206/irq.c | |
| parent | a077e91690fb32a1453423b2cf1df3492fd30c3a (diff) | |
sh: Mass ctrl_in/outX to __raw_read/writeX conversion.
The old ctrl in/out routines are non-portable and unsuitable for
cross-platform use. While drivers/sh has already been sanitized, there
is still quite a lot of code that is not. This converts the arch/sh/ bits
over, which permits us to flag the routines as deprecated whilst still
building with -Werror for the architecture code, and to ensure that
future users are not added.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Diffstat (limited to 'arch/sh/boards/mach-se/7206/irq.c')
| -rw-r--r-- | arch/sh/boards/mach-se/7206/irq.c | 40 |
1 files changed, 20 insertions, 20 deletions
diff --git a/arch/sh/boards/mach-se/7206/irq.c b/arch/sh/boards/mach-se/7206/irq.c index aef7f052851a..79be4bc59933 100644 --- a/arch/sh/boards/mach-se/7206/irq.c +++ b/arch/sh/boards/mach-se/7206/irq.c @@ -32,12 +32,12 @@ static void disable_se7206_irq(unsigned int irq) unsigned short msk0,msk1; /* Set the priority in IPR to 0 */ - val = ctrl_inw(INTC_IPR01); + val = __raw_readw(INTC_IPR01); val &= mask; - ctrl_outw(val, INTC_IPR01); + __raw_writew(val, INTC_IPR01); /* FPGA mask set */ - msk0 = ctrl_inw(INTMSK0); - msk1 = ctrl_inw(INTMSK1); + msk0 = __raw_readw(INTMSK0); + msk1 = __raw_readw(INTMSK1); switch (irq) { case IRQ0_IRQ: @@ -51,8 +51,8 @@ static void disable_se7206_irq(unsigned int irq) msk1 |= 0x00ff; break; } - ctrl_outw(msk0, INTMSK0); - ctrl_outw(msk1, INTMSK1); + __raw_writew(msk0, INTMSK0); + __raw_writew(msk1, INTMSK1); } static void enable_se7206_irq(unsigned int irq) @@ -62,13 +62,13 @@ static void enable_se7206_irq(unsigned int irq) unsigned short msk0,msk1; /* Set priority in IPR back to original value */ - val = ctrl_inw(INTC_IPR01); + val = __raw_readw(INTC_IPR01); val |= value; - ctrl_outw(val, INTC_IPR01); + __raw_writew(val, INTC_IPR01); /* FPGA mask reset */ - msk0 = ctrl_inw(INTMSK0); - msk1 = ctrl_inw(INTMSK1); + msk0 = __raw_readw(INTMSK0); + msk1 = __raw_readw(INTMSK1); switch (irq) { case IRQ0_IRQ: @@ -82,8 +82,8 @@ static void enable_se7206_irq(unsigned int irq) msk1 &= ~0x00ff; break; } - ctrl_outw(msk0, INTMSK0); - ctrl_outw(msk1, INTMSK1); + __raw_writew(msk0, INTMSK0); + __raw_writew(msk1, INTMSK1); } static void eoi_se7206_irq(unsigned int irq) @@ -93,8 +93,8 @@ static void eoi_se7206_irq(unsigned int irq) if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS))) enable_se7206_irq(irq); /* FPGA isr clear */ - sts0 = ctrl_inw(INTSTS0); - sts1 = ctrl_inw(INTSTS1); + sts0 = __raw_readw(INTSTS0); + sts1 = __raw_readw(INTSTS1); switch (irq) { case IRQ0_IRQ: @@ -108,8 +108,8 @@ static void eoi_se7206_irq(unsigned int irq) sts1 &= ~0x00ff; break; } - ctrl_outw(sts0, INTSTS0); - ctrl_outw(sts1, INTSTS1); + __raw_writew(sts0, INTSTS0); + __raw_writew(sts1, INTSTS1); } static struct irq_chip se7206_irq_chip __read_mostly = { @@ -136,11 +136,11 @@ void __init init_se7206_IRQ(void) make_se7206_irq(IRQ0_IRQ); /* SMC91C111 */ make_se7206_irq(IRQ1_IRQ); /* ATA */ make_se7206_irq(IRQ3_IRQ); /* SLOT / PCM */ - ctrl_outw(inw(INTC_ICR1) | 0x000b ,INTC_ICR1 ) ; /* ICR1 */ + __raw_writew(inw(INTC_ICR1) | 0x000b ,INTC_ICR1 ) ; /* ICR1 */ /* FPGA System register setup*/ - ctrl_outw(0x0000,INTSTS0); /* Clear INTSTS0 */ - ctrl_outw(0x0000,INTSTS1); /* Clear INTSTS1 */ + __raw_writew(0x0000,INTSTS0); /* Clear INTSTS0 */ + __raw_writew(0x0000,INTSTS1); /* Clear INTSTS1 */ /* IRQ0=LAN, IRQ1=ATA, IRQ3=SLT,PCM */ - ctrl_outw(0x0001,INTSEL); + __raw_writew(0x0001,INTSEL); } |