diff options
| author | Masahiro Yamada <yamada.masahiro@socionext.com> | 2018-12-07 20:33:52 +0900 |
|---|---|---|
| committer | Michal Simek <michal.simek@xilinx.com> | 2018-12-14 08:09:19 +0100 |
| commit | bafcc61d998c1ca18f556d92a0e95335ac68c7da (patch) | |
| tree | 3e8d1616994db66306a0151940ea13333e86e548 | |
| parent | 1e17ab5320a654eaf1e4ce121c61e7aa9732805a (diff) | |
microblaze: adjust the help to the real behavior
"make ARCH=microblaze help" mentions simpleImage.<dt>.unstrip,
but it is not a real Make target. It does not work because Makefile
assumes "system.unstrip" is the name of DT.
$ make ARCH=microblaze CROSS_COMPILE=microblaze-linux- simpleImage.system.unstrip
[ snip ]
make[1]: *** No rule to make target 'arch/microblaze/boot/dts/system.unstrip.dtb', needed by 'arch/microblaze/boot/dts/system.dtb'. Stop.
make: *** [Makefile;1060: arch/microblaze/boot/dts] Error 2
make: *** Waiting for unfinished jobs....
simpleImage.<dt> works like a phony target that generates multiple
images. Reflect the real behavior. I removed the DT directory path
information because it is already explained a few lines below.
While I am here, I deleted the redundant *_defconfig explanation.
The top-level Makefile caters to list available defconfig files:
mmu_defconfig - Build for mmu
nommu_defconfig - Build for nommu
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| -rw-r--r-- | arch/microblaze/Makefile | 10 |
1 files changed, 5 insertions, 5 deletions
diff --git a/arch/microblaze/Makefile b/arch/microblaze/Makefile index ddb251aab484..f6b7ea6db8a0 100644 --- a/arch/microblaze/Makefile +++ b/arch/microblaze/Makefile @@ -92,11 +92,11 @@ define archhelp echo '* linux.bin - Create raw binary' echo ' linux.bin.gz - Create compressed raw binary' echo ' linux.bin.ub - Create U-Boot wrapped raw binary' - echo ' simpleImage.<dt> - ELF image with $(arch)/boot/dts/<dt>.dts linked in' - echo ' - stripped elf with fdt blob' - echo ' simpleImage.<dt>.unstrip - full ELF image with fdt blob' - echo ' *_defconfig - Select default config from arch/microblaze/configs' - echo '' + echo ' simpleImage.<dt> - Create the following images with <dt>.dtb linked in' + echo ' simpleImage.<dt> : raw image' + echo ' simpleImage.<dt>.ub : raw image with U-Boot header' + echo ' simpleImage.<dt>.unstrip: ELF (identical to vmlinux)' + echo ' simpleImage.<dt>.strip : stripped ELF' echo ' Targets with <dt> embed a device tree blob inside the image' echo ' These targets support board with firmware that does not' echo ' support passing a device tree directly. Replace <dt> with the' |