staging: emxx_udc: Add Emma Mobile USB Gadget driver

Add the emxx_udc driver to staging based on an old linux-2.6.35.7
android tree. The driver has been brushed up slightly to complile
but it is still in great need of cleanup.

At this point DT bindings are clearly lacking and I doubt that the
driver even can run with multiple instances (global variables, hurray!).

Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 files changed, 4235 insertions, 0 deletions

diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig
index 4f38fc000a37..a511efc1b3c7 100644
--- a/drivers/staging/Kconfig
+++ b/drivers/staging/Kconfig
@@ -90,6 +90,8 @@ source "drivers/staging/tidspbridge/Kconfig"
 
 source "drivers/staging/quickstart/Kconfig"
 
+source "drivers/staging/emxx_udc/Kconfig"
+
 source "drivers/staging/keucr/Kconfig"
 
 source "drivers/staging/bcm/Kconfig"
diff --git a/drivers/staging/Makefile b/drivers/staging/Makefile
index 1e97ad2177de..e5039056266d 100644
--- a/drivers/staging/Makefile
+++ b/drivers/staging/Makefile
@@ -39,6 +39,7 @@ obj-$(CONFIG_CXT1E1)		+= cxt1e1/
 obj-$(CONFIG_FB_XGI)		+= xgifb/
 obj-$(CONFIG_TIDSPBRIDGE)	+= tidspbridge/
 obj-$(CONFIG_ACPI_QUICKSTART)	+= quickstart/
+obj-$(CONFIG_USB_EMXX)		+= emxx_udc/
 obj-$(CONFIG_USB_ENESTORAGE)	+= keucr/
 obj-$(CONFIG_BCM_WIMAX)		+= bcm/
 obj-$(CONFIG_FT1000)		+= ft1000/
diff --git a/drivers/staging/emxx_udc/Kconfig b/drivers/staging/emxx_udc/Kconfig
new file mode 100644
index 000000000000..9bc6d3db86d9
--- /dev/null
+++ b/drivers/staging/emxx_udc/Kconfig
@@ -0,0 +1,10 @@
+config USB_EMXX
+	boolean "EMXX USB Function Device Controller"
+ 	depends on USB_GADGET && (ARCH_SHMOBILE || (ARM && COMPILE_TEST))
+	help
+	   The Emma Mobile series of SoCs from Renesas Electronics and
+	   former NEC Electronics include USB Function hardware.
+
+	   Say "y" to link the driver statically, or "m" to build a
+	   dynamically linked module called "emxx_udc" and force all
+	   gadget drivers to also be dynamically linked.
diff --git a/drivers/staging/emxx_udc/Makefile b/drivers/staging/emxx_udc/Makefile
new file mode 100644
index 000000000000..6352724c0b57
--- /dev/null
+++ b/drivers/staging/emxx_udc/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_USB_EMXX)	:= emxx_udc.o
diff --git a/drivers/staging/emxx_udc/emxx_udc.c b/drivers/staging/emxx_udc/emxx_udc.c
new file mode 100644
index 000000000000..b89c4115e570
--- /dev/null
+++ b/drivers/staging/emxx_udc/emxx_udc.c
@@ -0,0 +1,3559 @@
+/*
+ *  drivers/usb/gadget/emxx_udc.c
+ *     EMXX FCD (Function Controller Driver) for USB.
+ *
+ *  Copyright (C) 2010 Renesas Electronics Corporation
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2
+ *  as published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software Foundation,
+ *  Inc., 51 Franklin Street, Suite 500, Boston, MA 02110-1335, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/ioport.h>
+#include <linux/slab.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/interrupt.h>
+#include <linux/proc_fs.h>
+#include <linux/clk.h>
+#include <linux/ctype.h>
+#include <linux/string.h>
+#include <linux/dma-mapping.h>
+#include <linux/workqueue.h>
+
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+
+#include <linux/irq.h>
+#include <linux/gpio.h>
+
+#include "emxx_udc.h"
+
+#define	DRIVER_DESC	"EMXX UDC driver"
+#define	DMA_ADDR_INVALID	(~(dma_addr_t)0)
+
+static const char	driver_name[] = "emxx_udc";
+static const char	driver_desc[] = DRIVER_DESC;
+
+/*===========================================================================*/
+/* Prototype */
+static void _nbu2ss_ep_dma_abort(struct nbu2ss_udc *, struct nbu2ss_ep *);
+static void _nbu2ss_ep0_enable(struct nbu2ss_udc *);
+/*static void _nbu2ss_ep0_disable(struct nbu2ss_udc *);*/
+static void _nbu2ss_ep_done(struct nbu2ss_ep *, struct nbu2ss_req *, int);
+static void _nbu2ss_set_test_mode(struct nbu2ss_udc *, u32 mode);
+static void _nbu2ss_endpoint_toggle_reset(struct nbu2ss_udc *udc, u8 ep_adrs);
+
+static int _nbu2ss_pullup(struct nbu2ss_udc *, int);
+static void _nbu2ss_fifo_flush(struct nbu2ss_udc *, struct nbu2ss_ep *);
+
+/*===========================================================================*/
+/* Macro */
+#define	_nbu2ss_zero_len_pkt(udc, epnum)	\
+	_nbu2ss_ep_in_end(udc, epnum, 0, 0)
+
+
+/*===========================================================================*/
+/* Global */
+struct nbu2ss_udc udc_controller;
+
+
+/*-------------------------------------------------------------------------*/
+/* Read */
+static inline u32 _nbu2ss_readl(void *address)
+{
+	return __raw_readl(address) ;
+}
+
+/*-------------------------------------------------------------------------*/
+/* Write */
+static inline void _nbu2ss_writel(void *address, u32 udata)
+{
+	__raw_writel(udata, address) ;
+}
+
+/*-------------------------------------------------------------------------*/
+/* Set Bit */
+static inline void _nbu2ss_bitset(void *address, u32 udata)
+{
+	u32	reg_dt = __raw_readl(address) | (udata);
+	__raw_writel(reg_dt, address) ;
+}
+
+/*-------------------------------------------------------------------------*/
+/* Clear Bit */
+static inline void _nbu2ss_bitclr(void *address, u32 udata)
+{
+	u32	reg_dt = __raw_readl(address) & ~(udata);
+	__raw_writel(reg_dt, address) ;
+}
+
+#ifdef UDC_DEBUG_DUMP
+/*-------------------------------------------------------------------------*/
+static void _nbu2ss_dump_register(struct nbu2ss_udc *udc)
+{
+	int		i;
+	u32 reg_data;
+
+	pr_info("=== %s()\n", __func__);
+
+	if (udc == NULL) {
+		ERR("%s udc == NULL\n", __func__);
+		return;
+	}
+
+	spin_unlock(&udc->lock);
+
+	printk(KERN_DEBUG "\n-USB REG-\n");
+	for (i = 0x0 ; i < USB_BASE_SIZE ; i += 16) {
+		reg_data =   _nbu2ss_readl(
+			(u32 *)IO_ADDRESS(USB_BASE_ADDRESS + i));
+		printk(KERN_DEBUG "USB%04x =%08x", i, (int)reg_data);
+
+		reg_data =  _nbu2ss_readl(
+			(u32 *)IO_ADDRESS(USB_BASE_ADDRESS + i + 4));
+		printk(KERN_DEBUG " %08x", (int)reg_data);
+
+		reg_data =  _nbu2ss_readl(
+			(u32 *)IO_ADDRESS(USB_BASE_ADDRESS + i + 8));
+		printk(KERN_DEBUG " %08x", (int)reg_data);
+
+		reg_data =  _nbu2ss_readl(
+			(u32 *)IO_ADDRESS(USB_BASE_ADDRESS + i + 12));
+		printk(KERN_DEBUG " %08x\n", (int)reg_data);
+
+	}
+
+	spin_lock(&udc->lock);
+}
+#endif /* UDC_DEBUG_DUMP */
+
+/*-------------------------------------------------------------------------*/
+/* Endpoint 0 Callback (Complete) */
+static void _nbu2ss_ep0_complete(struct usb_ep *_ep, struct usb_request *_req)
+{
+	u8		recipient;
+	u16		selector;
+	u32		test_mode;
+	struct usb_ctrlrequest	*p_ctrl;
+	struct nbu2ss_udc *udc;
+
+	if ((_ep == NULL) || (_req == NULL))
+		return;
+
+	udc = (struct nbu2ss_udc *)_req->context;
+	p_ctrl = &udc->ctrl;
+	if ((p_ctrl->bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD) {
+
+		if (p_ctrl->bRequest == USB_REQ_SET_FEATURE) {
+			/*-------------------------------------------------*/
+			/* SET_FEATURE */
+			recipient = (u8)(p_ctrl->bRequestType & USB_RECIP_MASK);
+			selector  = p_ctrl->wValue;
+			if ((recipient == USB_RECIP_DEVICE) &&
+				(selector == USB_DEVICE_TEST_MODE)) {
+				test_mode = (u32)(p_ctrl->wIndex >> 8);
+				_nbu2ss_set_test_mode(udc, test_mode);
+			}
+		}
+	}
+}
+
+/*-------------------------------------------------------------------------*/
+/* Initialization usb_request */
+static void _nbu2ss_create_ep0_packet(
+	struct nbu2ss_udc *udc,
+	void *p_buf,
+	unsigned length
+)
+{
+	udc->ep0_req.req.buf		= p_buf;
+	udc->ep0_req.req.length		= length;
+	udc->ep0_req.req.dma		= 0;
+	udc->ep0_req.req.zero		= TRUE;
+	udc->ep0_req.req.complete	= _nbu2ss_ep0_complete;
+	udc->ep0_req.req.status		= -EINPROGRESS;
+	udc->ep0_req.req.context	= udc;
+	udc->ep0_req.req.actual		= 0;
+}
+
+/*-------------------------------------------------------------------------*/
+/* Acquisition of the first address of RAM(FIFO) */
+static u32 _nbu2ss_get_begin_ram_address(struct nbu2ss_udc *udc)
+{
+	u32		num, buf_type;
+	u32		data, last_ram_adr, use_ram_size;
+
+	PT_EP_REGS	p_ep_regs;
+
+	last_ram_adr = (D_RAM_SIZE_CTRL / sizeof(u32)) * 2;
+	use_ram_size = 0;
+
+	for (num = 0; num < NUM_ENDPOINTS - 1; num++) {
+		p_ep_regs = &udc->p_regs->EP_REGS[num];
+		data = _nbu2ss_readl(&p_ep_regs->EP_PCKT_ADRS);
+		buf_type = _nbu2ss_readl(&p_ep_regs->EP_CONTROL) & EPn_BUF_TYPE;
+		if (buf_type == 0) {
+			/* Single Buffer */
+			use_ram_size += (data & EPn_MPKT) / sizeof(u32);
+		} else {
+			/* Double Buffer */
+			use_ram_size += ((data & EPn_MPKT) / sizeof(u32)) * 2;
+		}
+
+		if ((data >> 16) > last_ram_adr)
+			last_ram_adr = data>>16;
+	}
+
+	return last_ram_adr + use_ram_size;
+}
+
+/*-------------------------------------------------------------------------*/
+/* Construction of Endpoint */
+static int _nbu2ss_ep_init(struct nbu2ss_udc *udc, struct nbu2ss_ep *ep)
+{
+	u32		num;
+	u32		data;
+	u32		begin_adrs;
+
+	if (ep->epnum == 0)
+		return	-EINVAL;
+
+	num = ep->epnum - 1;
+
+	/*-------------------------------------------------------------*/
+	/* RAM Transfer Address */
+	begin_adrs = _nbu2ss_get_begin_ram_address(udc);
+	data = (begin_adrs << 16) | ep->ep.maxpacket;
+	_nbu2ss_writel(&udc->p_regs->EP_REGS[num].EP_PCKT_ADRS, data);
+
+	/*-------------------------------------------------------------*/
+	/* Interrupt Enable */
+	data = 1 << (ep->epnum + 8);
+	_nbu2ss_bitset(&udc->p_regs->USB_INT_ENA, data);
+
+	/*-------------------------------------------------------------*/
+	/* Endpoint Type(Mode) */
+	/*   Bulk, Interrupt, ISO */
+	switch (ep->ep_type) {
+	case USB_ENDPOINT_XFER_BULK:
+		data = EPn_BULK;
+		break;
+
+	case USB_ENDPOINT_XFER_INT:
+		data = EPn_BUF_SINGLE | EPn_INTERRUPT;
+		break;
+
+	case USB_ENDPOINT_XFER_ISOC:
+		data = EPn_ISO;
+		break;
+
+	default:
+		data = 0;
+		break;
+	}
+
+	_nbu2ss_bitset(&udc->p_regs->EP_REGS[num].EP_CONTROL, data);
+	_nbu2ss_endpoint_toggle_reset(udc, (ep->epnum|ep->direct));
+
+	if (ep->direct == USB_DIR_OUT) {
+		/*---------------------------------------------------------*/
+		/* OUT */
+		data = EPn_EN | EPn_BCLR | EPn_DIR0;
+		_nbu2ss_bitset(&udc->p_regs->EP_REGS[num].EP_CONTROL, data);
+
+		data = (EPn_ONAK | EPn_OSTL_EN | EPn_OSTL);
+		_nbu2ss_bitclr(&udc->p_regs->EP_REGS[num].EP_CONTROL, data);
+
+		data = (EPn_OUT_EN | EPn_OUT_END_EN);
+		_nbu2ss_bitset(&udc->p_regs->EP_REGS[num].EP_INT_ENA, data);
+	} else {
+		/*---------------------------------------------------------*/
+		/* IN */
+		data = (EPn_EN | EPn_BCLR | EPn_AUTO);
+		_nbu2ss_bitset(&udc->p_regs->EP_REGS[num].EP_CONTROL, data);
+
+		data = (EPn_ISTL);
+		_nbu2ss_bitclr(&udc->p_regs->EP_REGS[num].EP_CONTROL, data);
+
+		data = (EPn_IN_EN | EPn_IN_END_EN);
+		_nbu2ss_bitset(&udc->p_regs->EP_REGS[num].EP_INT_ENA, data);
+	}
+
+	return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+/* Release of Endpoint */
+static int _nbu2ss_epn_exit(struct nbu2ss_udc *udc, struct nbu2ss_ep *ep)
+{
+	u32		num;
+	u32		data;
+
+	if ((ep->epnum == 0) || (udc->vbus_active == 0))
+		return	-EINVAL;
+
+	num = ep->epnum - 1;
+
+	/*-------------------------------------------------------------*/
+	/* RAM Transfer Address */
+	_nbu2ss_writel(&udc->p_regs->EP_REGS[num].EP_PCKT_ADRS, 0);
+
+	/*-------------------------------------------------------------*/
+	/* Interrupt Disable */
+	data = 1 << (ep->epnum + 8);
+	_nbu2ss_bitclr(&udc->p_regs->USB_INT_ENA, data);
+
+	if (ep->direct == USB_DIR_OUT) {
+		/*---------------------------------------------------------*/
+		/* OUT */
+		data = EPn_ONAK | EPn_BCLR;
+		_nbu2ss_bitset(&udc->p_regs->EP_REGS[num].EP_CONTROL, data);
+
+		data = EPn_EN | EPn_DIR0;
+		_nbu2ss_bitclr(&udc->p_regs->EP_REGS[num].EP_CONTROL, data);
+
+		data = EPn_OUT_EN | EPn_OUT_END_EN;
+		_nbu2ss_bitclr(&udc->p_regs->EP_REGS[num].EP_INT_ENA, data);
+	} else {
+		/*---------------------------------------------------------*/
+		/* IN */
+		data = EPn_BCLR;
+		_nbu2ss_bitset(&udc->p_regs->EP_REGS[num].EP_CONTROL, data);
+
+		data = EPn_EN | EPn_AUTO;
+		_nbu2ss_bitclr(&udc->p_regs->EP_REGS[num].EP_CONTROL, data);
+
+		data = EPn_IN_EN | EPn_IN_END_EN;
+		_nbu2ss_bitclr(&udc->p_regs->EP_REGS[num].EP_INT_ENA, data);
+	}
+
+	return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+/* DMA setting (without Endpoint 0) */
+static void _nbu2ss_ep_dma_init(struct nbu2ss_udc *udc, struct nbu2ss_ep *ep)
+{
+	u32		num;
+	u32		data;
+
+	data = _nbu2ss_readl(&udc->p_regs->USBSSCONF);
+	if (((ep->epnum == 0) || (data & (1 << ep->epnum)) == 0))
+		return;		/* Not Support DMA */
+
+	num = ep->epnum - 1;
+
+	if (ep->direct == USB_DIR_OUT) {
+		/*---------------------------------------------------------*/
+		/* OUT */
+		data = ep->ep.maxpacket;
+		_nbu2ss_writel(&udc->p_regs->EP_DCR[num].EP_DCR2, data);
+
+		/*---------------------------------------------------------*/
+		/* Transfer Direct */
+		data = DCR1_EPn_DIR0;
+		_nbu2ss_bitset(&udc->p_regs->EP_DCR[num].EP_DCR1, data);
+
+		/*---------------------------------------------------------*/
+		/* DMA Mode etc. */
+		data = EPn_STOP_MODE | EPn_STOP_SET  | EPn_DMAMODE0;
+		_nbu2ss_writel(&udc->p_regs->EP_REGS[num].EP_DMA_CTRL, data);
+	} else {
+		/*---------------------------------------------------------*/
+		/* IN */
+		_nbu2ss_bitset(&udc->p_regs->EP_REGS[num].EP_CONTROL, EPn_AUTO);
+
+		/*---------------------------------------------------------*/
+		/* DMA Mode etc. */
+		data = EPn_BURST_SET | EPn_DMAMODE0;
+		_nbu2ss_writel(&udc->p_regs->EP_REGS[num].EP_DMA_CTRL, data);
+	}
+}
+
+/*-------------------------------------------------------------------------*/
+/* DMA setting release */
+static void _nbu2ss_ep_dma_exit(struct nbu2ss_udc *udc, struct nbu2ss_ep *ep)
+{
+	u32		num;
+	u32		data;
+	PT_FC_REGS	preg = udc->p_regs;
+
+	if (udc->vbus_active == 0)
+		return;		/* VBUS OFF */
+
+	data = _nbu2ss_readl(&preg->USBSSCONF);
+	if ((ep->epnum == 0) || ((data & (1 << ep->epnum)) == 0))
+		return;		/* Not Support DMA */
+
+	num = ep->epnum - 1;
+
+	_nbu2ss_ep_dma_abort(udc, ep);
+
+	if (ep->direct == USB_DIR_OUT) {
+		/*---------------------------------------------------------*/
+		/* OUT */
+		_nbu2ss_writel(&preg->EP_DCR[num].EP_DCR2, 0);
+		_nbu2ss_bitclr(&preg->EP_DCR[num].EP_DCR1, DCR1_EPn_DIR0);
+		_nbu2ss_writel(&preg->EP_REGS[num].EP_DMA_CTRL, 0);
+	} else {
+		/*---------------------------------------------------------*/
+		/* IN */
+		_nbu2ss_bitclr(&preg->EP_REGS[num].EP_CONTROL, EPn_AUTO);
+		_nbu2ss_writel(&preg->EP_REGS[num].EP_DMA_CTRL, 0);
+	}
+}
+
+/*-------------------------------------------------------------------------*/
+/* Abort DMA */
+static void _nbu2ss_ep_dma_abort(struct nbu2ss_udc *udc, struct nbu2ss_ep *ep)
+{
+	PT_FC_REGS	preg = udc->p_regs;
+
+	_nbu2ss_bitclr(&preg->EP_DCR[ep->epnum-1].EP_DCR1, DCR1_EPn_REQEN);
+	mdelay(DMA_DISABLE_TIME);	/* DCR1_EPn_REQEN Clear */
+	_nbu2ss_bitclr(&preg->EP_REGS[ep->epnum-1].EP_DMA_CTRL, EPn_DMA_EN);
+}
+
+/*-------------------------------------------------------------------------*/
+/* Start IN Transfer */
+static void _nbu2ss_ep_in_end(
+	struct nbu2ss_udc *udc,
+	u32 epnum,
+	u32 data32,
+	u32 length
+)
+{
+	u32		data;
+	u32		num;
+	PT_FC_REGS	preg = udc->p_regs;
+
+	if (length >= sizeof(u32))
+		return;
+
+	if (epnum == 0) {
+		_nbu2ss_bitclr(&preg->EP0_CONTROL, EP0_AUTO);
+
+		/* Writing of 1-4 bytes */
+		if (length)
+			_nbu2ss_writel(&preg->EP0_WRITE, data32);
+
+		data = ((length << 5) & EP0_DW) | EP0_DEND;
+		_nbu2ss_writel(&preg->EP0_CONTROL, data);
+
+		_nbu2ss_bitset(&preg->EP0_CONTROL, EP0_AUTO);
+	} else {
+		num = epnum - 1;
+
+		_nbu2ss_bitclr(&preg->EP_REGS[num].EP_CONTROL, EPn_AUTO);
+
+		/* Writing of 1-4 bytes */
+		if (length)
+			_nbu2ss_writel(&preg->EP_REGS[num].EP_WRITE, data32);
+
+		data = (((((u32)length) << 5) & EPn_DW) | EPn_DEND);
+		_nbu2ss_bitset(&preg->EP_REGS[num].EP_CONTROL, data);
+
+		_nbu2ss_bitset(&preg->EP_REGS[num].EP_CONTROL, EPn_AUTO);
+	}
+
+	return;
+}
+
+#ifdef USE_DMA
+/*-------------------------------------------------------------------------*/
+static void _nbu2ss_dma_map_single(
+	struct nbu2ss_udc *udc,
+	struct nbu2ss_ep *ep,
+	struct nbu2ss_req *req,
+	u8		direct
+)
+{
+	if (req->req.dma == DMA_ADDR_INVALID) {
+		if (req->unaligned)
+			req->req.dma = ep->phys_buf;
+		else {
+			req->req.dma = dma_map_single(
+				udc->gadget.dev.parent,
+				req->req.buf,
+				req->req.length,
+				(direct == USB_DIR_IN)
+				? DMA_TO_DEVICE : DMA_FROM_DEVICE);
+		}
+		req->mapped = 1;
+	} else {
+		if (!req->unaligned)
+			dma_sync_single_for_device(
+				udc->gadget.dev.parent,
+				req->req.dma,
+				req->req.length,
+				(direct == USB_DIR_IN)
+				? DMA_TO_DEVICE : DMA_FROM_DEVICE);
+
+		req->mapped = 0;
+	}
+}
+
+/*-------------------------------------------------------------------------*/
+static void _nbu2ss_dma_unmap_single(
+	struct nbu2ss_udc *udc,
+	struct nbu2ss_ep *ep,
+	struct nbu2ss_req *req,
+	u8		direct
+)
+{
+	u8		data[4];
+	u8		*p;
+	u32		count = 0;
+
+	if (direct == USB_DIR_OUT) {
+		count = req->req.actual % 4;
+		if (count) {
+			p = req->req.buf;
+			p += (req->req.actual - count);
+			memcpy(data, p, count);
+		}
+	}
+
+	if (req->mapped) {
+		if (req->unaligned) {
+			if (direct == USB_DIR_OUT)
+				memcpy(req->req.buf, ep->virt_buf,
+					req->req.actual & 0xfffffffc);
+		} else
+			dma_unmap_single(udc->gadget.dev.parent,
+				req->req.dma, req->req.length,
+				(direct == USB_DIR_IN)
+				? DMA_TO_DEVICE
+				: DMA_FROM_DEVICE);
+		req->req.dma = DMA_ADDR_INVALID;
+		req->mapped = 0;
+	} else {
+		if (!req->unaligned)
+			dma_sync_single_for_cpu(udc->gadget.dev.parent,
+				req->req.dma, req->req.length,
+				(direct == USB_DIR_IN)
+				? DMA_TO_DEVICE
+				: DMA_FROM_DEVICE);
+	}
+
+	if (count) {
+		p = req->req.buf;
+		p += (req->req.actual - count);
+		memcpy(p, data, count);
+	}
+}
+#endif
+
+/*-------------------------------------------------------------------------*/
+/* Endpoint 0 OUT Transfer (PIO) */
+static int EP0_out_PIO(struct nbu2ss_udc *udc, u8* pBuf, u32 length)
+{
+	u32		i;
+	int		nret   = 0;
+	u32		iWordLength = 0;
+	USB_REG_ACCESS* pBuf32 = (USB_REG_ACCESS *)pBuf;
+
+	/*------------------------------------------------------------*/
+	/* Read Length */
+	iWordLength = length / sizeof(u32);
+
+	/*------------------------------------------------------------*/
+	/* PIO Read */
+	if (iWordLength) {
+		for (i = 0; i < iWordLength; i++) {
+			pBuf32->dw = _nbu2ss_readl(&udc->p_regs->EP0_READ);
+			pBuf32++;
+		}
+		nret = iWordLength * sizeof(u32);
+	}
+
+	return nret;
+}
+
+/*-------------------------------------------------------------------------*/
+/* Endpoint 0 OUT Transfer (PIO, OverBytes) */
+static int EP0_out_OverBytes(struct nbu2ss_udc *udc, u8* pBuf, u32 length)
+{
+	u32		i;
+	u32		iReadSize = 0;
+	USB_REG_ACCESS  Temp32;
+	USB_REG_ACCESS* pBuf32 = (USB_REG_ACCESS *)pBuf;
+
+	if ((0 < length) && (length < sizeof(u32))) {
+		Temp32.dw = _nbu2ss_readl(&udc->p_regs->EP0_READ);
+		for (i = 0 ; i < length ; i++)
+			pBuf32->byte.DATA[i] = Temp32.byte.DATA[i];
+		iReadSize += length;
+	}
+
+	return iReadSize;
+}
+
+/*-------------------------------------------------------------------------*/
+/* Endpoint 0 IN Transfer (PIO) */
+static int EP0_in_PIO(struct nbu2ss_udc *udc, u8 *pBuf, u32 length)
+{
+	u32		i;
+	u32		iMaxLength   = EP0_PACKETSIZE;
+	u32		iWordLength  = 0;
+	u32		iWriteLength = 0;
+	USB_REG_ACCESS*	pBuf32 = (USB_REG_ACCESS *)pBuf;
+
+	/*------------------------------------------------------------*/
+	/* Transfer Length */
+	if (iMaxLength < length)
+		iWordLength = iMaxLength / sizeof(u32);
+	else
+		iWordLength = length / sizeof(u32);
+
+	/*------------------------------------------------------------*/
+	/* PIO */
+	for (i = 0; i < iWordLength; i++) {
+		_nbu2ss_writel(&udc->p_regs->EP0_WRITE, pBuf32->dw);
+		pBuf32++;
+		iWriteLength += sizeof(u32);
+	}
+
+	return iWriteLength;
+}
+
+/*-------------------------------------------------------------------------*/
+/* Endpoint 0 IN Transfer (PIO, OverBytes) */
+static int EP0_in_OverBytes(struct nbu2ss_udc *udc, u8 *pBuf, u32 iRemainSize)
+{
+	u32		i;
+	USB_REG_ACCESS Temp32;
+	USB_REG_ACCESS* pBuf32 = (USB_REG_ACCESS *)pBuf;
+
+	if ((0 < iRemainSize) && (iRemainSize < sizeof(u32))) {
+		for (i = 0 ; i < iRemainSize ; i++)
+			Temp32.byte.DATA[i] = pBuf32->byte.DATA[i];
+		_nbu2ss_ep_in_end(udc, 0, Temp32.dw, iRemainSize);
+
+		return iRemainSize;
+	}
+
+	return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+/* Transfer NULL Packet (Epndoint 0) */
+static int EP0_send_NULL(struct nbu2ss_udc *udc, bool pid_flag)
+{
+	u32		data;
+
+	data = _nbu2ss_readl(&udc->p_regs->EP0_CONTROL);
+	data &= ~(u32)EP0_INAK;
+
+	if (pid_flag)
+		data |= (EP0_INAK_EN | EP0_PIDCLR | EP0_DEND);
+	else
+		data |= (EP0_INAK_EN | EP0_DEND);
+
+	_nbu2ss_writel(&udc->p_regs->EP0_CONTROL, data);
+
+	return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+/* Receive NULL Packet (Endpoint 0) */
+static int EP0_receive_NULL(struct nbu2ss_udc *udc, bool pid_flag)
+{
+	u32		data;
+
+	data = _nbu2ss_readl(&udc->p_regs->EP0_CONTROL);
+	data &= ~(u32)EP0_ONAK;
+
+	if (pid_flag)
+		data |= EP0_PIDCLR;
+
+	_nbu2ss_writel(&udc->p_regs->EP0_CONTROL, data);
+
+	return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+static int _nbu2ss_ep0_in_transfer(
+	struct nbu2ss_udc *udc,
+	struct nbu2ss_ep *ep,
+	struct nbu2ss_req *req
+)
+{
+	u8		*pBuffer;			/* IN Data Buffer */
+	u32		data;
+	u32		iRemainSize = 0;
+	int		result = 0;
+
+	/*-------------------------------------------------------------*/
+	/* End confirmation */
+	if (req->req.actual == req->req.length) {
+		if ((req->req.actual % EP0_PACKETSIZE) == 0) {
+			if (req->zero) {
+				req->zero = 0;
+				EP0_send_NULL(udc, FALSE);
+				return 1;
+			}
+		}
+
+		return 0;		/* Transfer End */
+	}
+
+	/*-------------------------------------------------------------*/
+	/* NAK release */
+	data = _nbu2ss_readl(&udc->p_regs->EP0_CONTROL);
+	data |= EP0_INAK_EN;
+	data &= ~(u32)EP0_INAK;
+	_nbu2ss_writel(&udc->p_regs->EP0_CONTROL, data);
+
+	iRemainSize = req->req.length - req->req.actual;
+	pBuffer = (u8 *)req->req.buf;
+	pBuffer += req->req.actual;
+
+	/*-------------------------------------------------------------*/
+	/* Data transfer */
+	result = EP0_in_PIO(udc, pBuffer, iRemainSize);
+
+	req->div_len = result;
+	iRemainSize -= result;
+
+	if (iRemainSize == 0) {
+		EP0_send_NULL(udc, FALSE);
+		return result;
+	}
+
+	if ((iRemainSize < sizeof(u32)) && (result != EP0_PACKETSIZE)) {
+		pBuffer += result;
+		result += EP0_in_OverBytes(udc, pBuffer, iRemainSize);
+		req->div_len = result;
+	}
+
+	return result;
+}
+
+/*-------------------------------------------------------------------------*/
+static int _nbu2ss_ep0_out_transfer(
+	struct nbu2ss_udc *udc,
+	struct nbu2ss_ep *ep,
+	struct nbu2ss_req *req
+)
+{
+	u8		*pBuffer;
+	u32		iRemainSize;
+	u32		iRecvLength;
+	int		result = 0;
+	int		fRcvZero;
+
+	/*-------------------------------------------------------------*/
+	/* Receive data confirmation */
+	iRecvLength = _nbu2ss_readl(&udc->p_regs->EP0_LENGTH) & EP0_LDATA;
+	if (iRecvLength != 0) {
+
+		fRcvZero = 0;
+
+		iRemainSize = req->req.length - req->req.actual;
+		pBuffer = (u8 *)req->req.buf;
+		pBuffer += req->req.actual;
+
+		result = EP0_out_PIO(udc, pBuffer
+					, min(iRemainSize, iRecvLength));
+		if (result < 0)
+			return result;
+
+		req->req.actual += result;
+		iRecvLength -= result;
+
+		if ((0 < iRecvLength) && (iRecvLength < sizeof(u32))) {
+			pBuffer += result;
+			iRemainSize -= result;
+
+			result = EP0_out_OverBytes(udc, pBuffer
+					, min(iRemainSize, iRecvLength));
+			req->req.actual += result;
+		}
+	} else {
+		fRcvZero = 1;
+	}
+
+	/*-------------------------------------------------------------*/
+	/* End confirmation */
+	if (req->req.actual == req->req.length) {
+		if ((req->req.actual % EP0_PACKETSIZE) == 0) {
+			if (req->zero) {
+				req->zero = 0;
+				EP0_receive_NULL(udc, FALSE);
+				return 1;
+			}
+		}
+
+		return 0;		/* Transfer End */
+	}
+
+	if ((req->req.actual % EP0_PACKETSIZE) != 0)
+		return 0;		/* Short Packet Transfer End */
+
+	if (req->req.actual > req->req.length) {
+		ERR(" *** Overrun Error\n");
+		return -EOVERFLOW;
+	}
+
+	if (fRcvZero != 0) {
+		iRemainSize = _nbu2ss_readl(&udc->p_regs->EP0_CONTROL);
+		if (iRemainSize & EP0_ONAK) {
+			/*---------------------------------------------------*/
+			/* NACK release */
+			_nbu2ss_bitclr(&udc->p_regs->EP0_CONTROL, EP0_ONAK);
+		}
+		result = 1;
+	}
+
+	return result;
+}
+
+/*-------------------------------------------------------------------------*/
+static int _nbu2ss_out_dma(
+	struct nbu2ss_udc *udc,
+	struct nbu2ss_req *req,
+	u32		num,
+	u32		length
+)
+{
+	u8		*pBuffer;
+	u32		mpkt;
+	u32		lmpkt;
+	u32		dmacnt;
+	u32		burst = 1;
+	u32		data;
+	int		result = -EINVAL;
+	PT_FC_REGS	preg = udc->p_regs;
+
+	if (req->dma_flag)
+		return 1;		/* DMA is forwarded */
+
+	req->dma_flag = TRUE;
+	pBuffer = (u8 *)req->req.dma;
+	pBuffer += req->req.actual;
+
+	/* DMA Address */
+	_nbu2ss_writel(&preg->EP_DCR[num].EP_TADR, (u32)pBuffer);
+
+	/* Number of transfer packets */
+	mpkt = _nbu2ss_readl(&preg->EP_REGS[num].EP_PCKT_ADRS) & EPn_MPKT;
+	dmacnt = (length / mpkt);
+	lmpkt = (length % mpkt) & ~(u32)0x03;
+
+	if (DMA_MAX_COUNT < dmacnt) {
+		dmacnt = DMA_MAX_COUNT;
+		lmpkt = 0;
+	} else if (0 != lmpkt) {
+		if (0 == dmacnt)
+			burst = 0;	/* Burst OFF */
+		dmacnt++;
+	}
+
+	data = mpkt | (lmpkt << 16);
+	_nbu2ss_writel(&preg->EP_DCR[num].EP_DCR2, data);
+
+	data = ((dmacnt & 0xff) << 16) | DCR1_EPn_DIR0 | DCR1_EPn_REQEN;
+	_nbu2ss_writel(&preg->EP_DCR[num].EP_DCR1, data);
+
+	if (0 == burst) {
+		_nbu2ss_writel(&preg->EP_REGS[num].EP_LEN_DCNT, 0);
+		_nbu2ss_bitclr(&preg->EP_REGS[num].EP_DMA_CTRL, EPn_BURST_SET);
+	} else {
+		_nbu2ss_writel(&preg->EP_REGS[num].EP_LEN_DCNT
+				, (dmacnt << 16));
+		_nbu2ss_bitset(&preg->EP_REGS[num].EP_DMA_CTRL, EPn_BURST_SET);
+	}
+	_nbu2ss_bitset(&preg->EP_REGS[num].EP_DMA_CTRL, EPn_DMA_EN);
+
+	result = length & ~(u32)0x03;
+	req->div_len = result;
+
+	return result;
+}
+
+/*-------------------------------------------------------------------------*/
+static int _nbu2ss_epn_out_pio(
+	struct nbu2ss_udc *udc,
+	struct nbu2ss_ep *ep,
+	struct nbu2ss_req *req,
+	u32		length
+)
+{
+	u8		*pBuffer;
+	u32		i;
+	u32		data;
+	u32		iWordLength;
+	USB_REG_ACCESS	Temp32;
+	USB_REG_ACCESS	*pBuf32;
+	int		result = 0;
+	PT_FC_REGS	preg = udc->p_regs;
+
+	if (req->dma_flag)
+		return 1;		/* DMA is forwarded */
+
+	if (length == 0)
+		return 0;
+
+	pBuffer = (u8 *)req->req.buf;
+	pBuf32 = (USB_REG_ACCESS *)(pBuffer + req->req.actual);
+
+	iWordLength = length / sizeof(u32);
+	if (iWordLength > 0) {
+		/*---------------------------------------------------------*/
+		/* Copy of every four bytes */
+		for (i = 0; i < iWordLength; i++) {
+			pBuf32->dw =
+			_nbu2ss_readl(&preg->EP_REGS[ep->epnum-1].EP_READ);
+			pBuf32++;
+		}
+		result = iWordLength * sizeof(u32);
+	}
+
+	data = length - result;
+	if (data > 0) {
+		/*---------------------------------------------------------*/
+		/* Copy of fraction byte */
+		Temp32.dw = _nbu2ss_readl(&preg->EP_REGS[ep->epnum-1].EP_READ);
+		for (i = 0 ; i < data ; i++)
+			pBuf32->byte.DATA[i] = Temp32.byte.DATA[i];
+		result += data;
+	}
+
+	req->req.actual += result;
+
+	if ((req->req.actual == req->req.length)
+			|| ((req->req.actual % ep->ep.maxpacket) != 0)) {
+
+		result = 0;
+	}
+
+	return result;
+}
+
+/*-------------------------------------------------------------------------*/
+static int _nbu2ss_epn_out_data(
+	struct nbu2ss_udc *udc,
+	struct nbu2ss_ep *ep,
+	struct nbu2ss_req *req,
+	u32		data_size
+)
+{
+	u32		num;
+	u32		iBufSize;
+	int		nret = 1;
+
+	if (ep->epnum == 0)
+		return -EINVAL;
+
+	num = ep->epnum - 1;
+
+	iBufSize = min((req->req.length - req->req.actual), data_size);
+
+	if ((ep->ep_type != USB_ENDPOINT_XFER_INT)
+		&& (req->req.dma != 0)
+		&& (iBufSize  >= sizeof(u32))) {
+		nret = _nbu2ss_out_dma(udc, req, num, iBufSize);
+	} else {
+		iBufSize = min(iBufSize, (u32)ep->ep.maxpacket);
+		nret = _nbu2ss_epn_out_pio(udc, ep, req, iBufSize);
+	}
+
+	return nret;
+}
+
+/*-------------------------------------------------------------------------*/
+static int _nbu2ss_epn_out_transfer(
+	struct nbu2ss_udc *udc,
+	struct nbu2ss_ep *ep,
+	struct nbu2ss_req *req
+)
+{
+	u32		num;
+	u32		iRecvLength;
+	int		result = 1;
+	PT_FC_REGS	preg = udc->p_regs;
+
+	if (ep->epnum == 0)
+		return -EINVAL;
+
+	num = ep->epnum - 1;
+
+	/*-------------------------------------------------------------*/
+	/* Receive Length */
+	iRecvLength
+		= _nbu2ss_readl(&preg->EP_REGS[num].EP_LEN_DCNT) & EPn_LDATA;
+
+	if (iRecvLength != 0) {
+		result = _nbu2ss_epn_out_data(udc, ep, req, iRecvLength);
+		if (iRecvLength < ep->ep.maxpacket) {
+			if (iRecvLength == result) {
+				req->req.actual += result;
+				result = 0;
+			}
+		}
+	} else {
+		if ((req->req.actual == req->req.length)
+			|| ((req->req.actual % ep->ep.maxpacket) != 0)) {
+
+			result = 0;
+		}
+	}
+
+	if (result == 0) {
+		if ((req->req.actual % ep->ep.maxpacket) == 0) {
+			if (req->zero) {
+				req->zero = 0;
+				return 1;
+			}
+		}
+	}
+
+	if (req->req.actual > req->req.length) {
+		ERR(" *** Overrun Error\n");
+		ERR(" *** actual = %d, length = %d\n",
+			req->req.actual, req->req.length);
+		result = -EOVERFLOW;
+	}
+
+	return result;
+}
+
+/*-------------------------------------------------------------------------*/
+static int _nbu2ss_in_dma(
+	struct nbu2ss_udc *udc,
+	struct nbu2ss_ep *ep,
+	struct nbu2ss_req *req,
+	u32		num,
+	u32		length
+)
+{
+	u8		*pBuffer;
+	u32		mpkt;		/* MaxPacketSize */
+	u32		lmpkt;		/* Last Packet Data Size */
+	u32		dmacnt;		/* IN Data Size */
+	u32		iWriteLength;
+	u32		data;
+	int		result = -EINVAL;
+	PT_FC_REGS	preg = udc->p_regs;
+
+	if (req->dma_flag)
+		return 1;		/* DMA is forwarded */
+
+#ifdef USE_DMA
+	if (req->req.actual == 0)
+		_nbu2ss_dma_map_single(udc, ep, req, USB_DIR_IN);
+#endif
+	req->dma_flag = TRUE;
+
+	/* MAX Packet Size */
+	mpkt = _nbu2ss_readl(&preg->EP_REGS[num].EP_PCKT_ADRS) & EPn_MPKT;
+
+	if ((DMA_MAX_COUNT * mpkt) < length)
+		iWriteLength = DMA_MAX_COUNT * mpkt;
+	else
+		iWriteLength = length;
+
+	/*------------------------------------------------------------*/
+	/* Number of transmission packets */
+	if (mpkt < iWriteLength) {
+		dmacnt = iWriteLength / mpkt;
+		lmpkt  = (iWriteLength % mpkt) & ~(u32)0x3;
+		if (lmpkt != 0)
+			dmacnt++;
+		else
+			lmpkt = mpkt & ~(u32)0x3;
+
+	} else {
+		dmacnt = 1;
+		lmpkt  = iWriteLength & ~(u32)0x3;
+	}
+
+	/* Packet setting */
+	data = mpkt | (lmpkt << 16);
+	_nbu2ss_writel(&preg->EP_DCR[num].EP_DCR2, data);
+
+	/* Address setting */
+	pBuffer = (u8 *)req->req.dma;
+	pBuffer += req->req.actual;
+	_nbu2ss_writel(&preg->EP_DCR[num].EP_TADR, (u32)pBuffer);
+
+	/* Packet and DMA setting */
+	data = ((dmacnt & 0xff) << 16) | DCR1_EPn_REQEN;
+	_nbu2ss_writel(&preg->EP_DCR[num].EP_DCR1, data);
+
+	/* Packet setting of EPC */
+	data = dmacnt << 16;
+	_nbu2ss_writel(&preg->EP_REGS[num].EP_LEN_DCNT, data);
+
+	/*DMA setting of EPC */
+	_nbu2ss_bitset(&preg->EP_REGS[num].EP_DMA_CTRL, EPn_DMA_EN);
+
+	result = iWriteLength & ~(u32)0x3;
+	req->div_len = result;
+
+	return result;
+}
+
+/*-------------------------------------------------------------------------*/
+static int _nbu2ss_epn_in_pio(
+	struct nbu2ss_udc *udc,
+	struct nbu2ss_ep *ep,
+	struct nbu2ss_req *req,
+	u32		length
+)
+{
+	u8		*pBuffer;
+	u32		i;
+	u32		data;
+	u32		iWordLength;
+	USB_REG_ACCESS	Temp32;
+	USB_REG_ACCESS	*pBuf32 = NULL;
+	int		result = 0;
+	PT_FC_REGS	preg = udc->p_regs;
+
+	if (req->dma_flag)
+		return 1;		/* DMA is forwarded */
+
+	if (length > 0) {
+		pBuffer = (u8 *)req->req.buf;
+		pBuf32 = (USB_REG_ACCESS *)(pBuffer + req->req.actual);
+
+		iWordLength = length / sizeof(u32);
+		if (iWordLength > 0) {
+			for (i = 0; i < iWordLength; i++) {
+				_nbu2ss_writel(
+					&preg->EP_REGS[ep->epnum-1].EP_WRITE
+					, pBuf32->dw
+				);
+
+				pBuf32++;
+			}
+			result = iWordLength * sizeof(u32);
+		}
+	}
+
+	if (result != ep->ep.maxpacket) {
+		data = length - result;
+		Temp32.dw = 0;
+		for (i = 0 ; i < data ; i++)
+			Temp32.byte.DATA[i] = pBuf32->byte.DATA[i];
+
+		_nbu2ss_ep_in_end(udc, ep->epnum, Temp32.dw, data);
+		result += data;
+	}
+
+	req->div_len = result;
+
+	return result;
+}
+
+/*-------------------------------------------------------------------------*/
+static int _nbu2ss_epn_in_data(
+	struct nbu2ss_udc *udc,
+	struct nbu2ss_ep *ep,
+	struct nbu2ss_req *req,
+	u32		data_size
+)
+{
+	u32		num;
+	int		nret = 1;
+
+	if (ep->epnum == 0)
+		return -EINVAL;
+
+	num = ep->epnum - 1;
+
+	if ((ep->ep_type != USB_ENDPOINT_XFER_INT)
+		&& (req->req.dma != 0)
+		&& (data_size >= sizeof(u32))) {
+		nret = _nbu2ss_in_dma(udc, ep, req, num, data_size);
+	} else {
+		data_size = min(data_size, (u32)ep->ep.maxpacket);
+		nret = _nbu2ss_epn_in_pio(udc, ep, req, data_size);
+	}
+
+	return nret;
+}
+
+/*-------------------------------------------------------------------------*/
+static int _nbu2ss_epn_in_transfer(
+	struct nbu2ss_udc *udc,
+	struct nbu2ss_ep *ep,
+	struct nbu2ss_req *req
+)
+{
+	u32		num;
+	u32		iBufSize;
+	int		result = 0;
+	u32		status;
+
+	if (ep->epnum == 0)
+		return -EINVAL;
+
+	num = ep->epnum - 1;
+
+	status = _nbu2ss_readl(&udc->p_regs->EP_REGS[num].EP_STATUS);
+
+	/*-------------------------------------------------------------*/
+	/* State confirmation of FIFO */
+	if (req->req.actual == 0) {
+		if ((status & EPn_IN_EMPTY) == 0)
+			return 1;	/* Not Empty */
+
+	} else {
+		if ((status & EPn_IN_FULL) != 0)
+			return 1;	/* Not Empty */
+	}
+
+	/*-------------------------------------------------------------*/
+	/* Start tranfer */
+	iBufSize = req->req.length - req->req.actual;
+	if (iBufSize > 0)
+		result = _nbu2ss_epn_in_data(udc, ep, req, iBufSize);
+	else if (req->req.length == 0)
+		_nbu2ss_zero_len_pkt(udc, ep->epnum);
+
+	return result;
+}
+
+/*-------------------------------------------------------------------------*/
+static int _nbu2ss_start_transfer(
+	struct nbu2ss_udc *udc,
+	struct nbu2ss_ep *ep,
+	struct nbu2ss_req *req,
+	bool	bflag)
+{
+	int		nret = -EINVAL;
+
+	req->dma_flag = FALSE;
+	req->div_len = 0;
+
+	if (req->req.length == 0)
+		req->zero = 0;
+	else {
+		if ((req->req.length % ep->ep.maxpacket) == 0)
+			req->zero = req->req.zero;
+		else
+			req->zero = 0;
+	}
+
+	if (ep->epnum == 0) {
+		/* EP0 */
+		switch (udc->ep0state) {
+		case EP0_IN_DATA_PHASE:
+			nret = _nbu2ss_ep0_in_transfer(udc, ep, req);
+			break;
+
+		case EP0_OUT_DATA_PHASE:
+			nret = _nbu2ss_ep0_out_transfer(udc, ep, req);
+			break;
+
+		case EP0_IN_STATUS_PHASE:
+			nret = EP0_send_NULL(udc, TRUE);
+			break;
+
+		default:
+			break;
+		}
+
+	} else {
+		/* EPn */
+		if (ep->direct == USB_DIR_OUT) {
+			/* OUT */
+			if (bflag == FALSE)
+				nret = _nbu2ss_epn_out_transfer(udc, ep, req);
+		} else {
+			/* IN */
+			nret = _nbu2ss_epn_in_transfer(udc, ep, req);
+		}
+	}
+
+	return nret;
+}
+
+/*-------------------------------------------------------------------------*/
+static void _nbu2ss_restert_transfer(struct nbu2ss_ep *ep)
+{
+	u32		length;
+	bool	bflag = FALSE;
+	struct nbu2ss_req *req;
+
+	if (list_empty(&ep->queue))
+		req = NULL;
+	else
+		req = list_entry(ep->queue.next, struct nbu2ss_req, queue);
+
+	if (req == NULL)
+		return;
+
+	if (ep->epnum > 0) {
+		length = _nbu2ss_readl(
+			&ep->udc->p_regs->EP_REGS[ep->epnum-1].EP_LEN_DCNT);
+
+		length &= EPn_LDATA;
+		if (length < ep->ep.maxpacket)
+			bflag = TRUE;
+	}
+
+	_nbu2ss_start_transfer(ep->udc, ep, req, bflag);
+}
+
+/*-------------------------------------------------------------------------*/
+/*	Endpoint Toggle Reset */
+static void _nbu2ss_endpoint_toggle_reset(
+	struct nbu2ss_udc *udc,
+	u8 ep_adrs)
+{
+	u8		num;
+	u32		data;
+
+	if ((ep_adrs == 0) || (ep_adrs == 0x80))
+		return;
+
+	num = (ep_adrs & 0x7F) - 1;
+
+	if (ep_adrs & USB_DIR_IN)
+		data = EPn_IPIDCLR;
+	else
+		data = EPn_BCLR | EPn_OPIDCLR;
+
+	_nbu2ss_bitset(&udc->p_regs->EP_REGS[num].EP_CONTROL, data);
+}
+
+/*-------------------------------------------------------------------------*/
+/*	Endpoint STALL set */
+static void _nbu2ss_set_endpoint_stall(
+	struct nbu2ss_udc *udc,
+	u8 ep_adrs,
+	bool bstall)
+{
+	u8		num, epnum;
+	u32		data;
+	struct nbu2ss_ep *ep;
+	PT_FC_REGS	preg = udc->p_regs;
+
+	if ((ep_adrs == 0) || (ep_adrs == 0x80)) {
+		if (bstall) {
+			/* Set STALL */
+			_nbu2ss_bitset(&preg->EP0_CONTROL, EP0_STL);
+		} else {
+			/* Clear STALL */
+			_nbu2ss_bitclr(&preg->EP0_CONTROL, EP0_STL);
+		}
+	} else {
+		epnum = ep_adrs & USB_ENDPOINT_NUMBER_MASK;
+		num = epnum - 1;
+		ep = &udc->ep[epnum];
+
+		if (bstall) {
+			/* Set STALL */
+			ep->halted = TRUE;
+
+			if (ep_adrs & USB_DIR_IN)
+				data = EPn_BCLR | EPn_ISTL;
+			else
+				data = EPn_OSTL_EN | EPn_OSTL;
+
+			_nbu2ss_bitset(&preg->EP_REGS[num].EP_CONTROL, data);
+		} else {
+			/* Clear STALL */
+			ep->stalled = FALSE;
+			if (ep_adrs & USB_DIR_IN) {
+				_nbu2ss_bitclr(&preg->EP_REGS[num].EP_CONTROL
+						, EPn_ISTL);
+			} else {
+				data =
+				_nbu2ss_readl(&preg->EP_REGS[num].EP_CONTROL);
+
+				data &= ~EPn_OSTL;
+				data |= EPn_OSTL_EN;
+
+				_nbu2ss_writel(&preg->EP_REGS[num].EP_CONTROL
+						, data);
+			}
+
+			ep->stalled = FALSE;
+			if (ep->halted) {
+				ep->halted = FALSE;
+				_nbu2ss_restert_transfer(ep);
+			}
+		}
+	}
+
+	return;
+}
+
+
+/*-------------------------------------------------------------------------*/
+/* Device Descriptor */
+static struct usb_device_descriptor device_desc = {
+	.bLength              = sizeof(device_desc),
+	.bDescriptorType      = USB_DT_DEVICE,
+	.bcdUSB               = __constant_cpu_to_le16(0x0200),
+	.bDeviceClass         = USB_CLASS_VENDOR_SPEC,
+	.bDeviceSubClass      = 0x00,
+	.bDeviceProtocol      = 0x00,
+	.bMaxPacketSize0      = 64,
+	.idVendor             = __constant_cpu_to_le16 (0x0409),
+	.idProduct            = __constant_cpu_to_le16 (0xfff0),
+	.bcdDevice            = 0xffff,
+	.iManufacturer        = 0x00,
+	.iProduct             = 0x00,
+	.iSerialNumber        = 0x00,
+	.bNumConfigurations   = 0x01,
+};
+
+/*-------------------------------------------------------------------------*/
+static void _nbu2ss_set_test_mode(struct nbu2ss_udc *udc, u32 mode)
+{
+	u32		data;
+
+	if (mode > MAX_TEST_MODE_NUM)
+		return;
+
+	pr_info("SET FEATURE : test mode = %d\n", mode);
+
+	data = _nbu2ss_readl(&udc->p_regs->USB_CONTROL);
+	data &= ~TEST_FORCE_ENABLE;
+	data |= mode << TEST_MODE_SHIFT;
+
+	_nbu2ss_writel(&udc->p_regs->USB_CONTROL, data);
+	_nbu2ss_bitset(&udc->p_regs->TEST_CONTROL, CS_TESTMODEEN);
+}
+
+/*-------------------------------------------------------------------------*/
+static int _nbu2ss_set_feature_device(
+	struct nbu2ss_udc *udc,
+	u16 selector,
+	u16 wIndex
+)
+{
+	int	result = -EOPNOTSUPP;
+
+	switch (selector) {
+	case USB_DEVICE_REMOTE_WAKEUP:
+		if (0x0000 == wIndex) {
+			udc->remote_wakeup = U2F_ENABLE;
+			result = 0;
+		}
+		break;
+
+	case USB_DEVICE_TEST_MODE:
+		wIndex = wIndex >> 8;
+		if (wIndex <= MAX_TEST_MODE_NUM)
+			result = 0;
+		break;
+
+	default:
+		break;
+	}
+
+	return result;
+}
+
+/*-------------------------------------------------------------------------*/
+static int _nbu2ss_get_ep_stall(struct nbu2ss_udc *udc, u8 ep_adrs)
+{
+	u8		epnum;
+	u32		data = 0, bit_data;
+	PT_FC_REGS	preg = udc->p_regs;
+
+	epnum = ep_adrs & ~USB_ENDPOINT_DIR_MASK;
+	if (epnum == 0) {
+		data = _nbu2ss_readl(&preg->EP0_CONTROL);
+		bit_data = EP0_STL;
+
+	} else {
+		data = _nbu2ss_readl(&preg->EP_REGS[epnum-1].EP_CONTROL);
+		if ((data & EPn_EN) == 0)
+			return -1;
+
+		if (ep_adrs & USB_ENDPOINT_DIR_MASK)
+			bit_data = EPn_ISTL;
+		else
+			bit_data = EPn_OSTL;
+	}
+
+	if ((data & bit_data) == 0)
+		return 0;
+	else
+		return 1;
+}
+
+/*-------------------------------------------------------------------------*/
+static inline int _nbu2ss_req_feature(struct nbu2ss_udc *udc, bool bset)
+{
+	u8	recipient = (u8)(udc->ctrl.bRequestType & USB_RECIP_MASK);
+	u8	direction = (u8)(udc->ctrl.bRequestType & USB_DIR_IN);
+	u16	selector  = udc->ctrl.wValue;
+	u16	wIndex    = udc->ctrl.wIndex;
+	u8	ep_adrs;
+	int	result = -EOPNOTSUPP;
+
+	if ((0x0000 != udc->ctrl.wLength) ||
+			(USB_DIR_OUT != direction)) {
+		return -EINVAL;
+	}
+
+	switch (recipient) {
+	case USB_RECIP_DEVICE:
+		if (bset)
+			result =
+			_nbu2ss_set_feature_device(udc, selector, wIndex);
+		break;
+
+	case USB_RECIP_ENDPOINT:
+		if (0x0000 == (wIndex & 0xFF70)) {
+			if (USB_ENDPOINT_HALT == selector) {
+				ep_adrs = wIndex & 0xFF;
+				if (bset == FALSE) {
+					_nbu2ss_endpoint_toggle_reset(
+						udc, ep_adrs);
+				}
+
+				_nbu2ss_set_endpoint_stall(
+					udc, ep_adrs, bset);
+
+				result = 0;
+			}
+		}
+		break;
+
+	default:
+		break;
+	}
+
+	if (result >= 0)
+		_nbu2ss_create_ep0_packet(udc, udc->ep0_buf, 0);
+
+	return result;
+}
+
+/*-------------------------------------------------------------------------*/
+static inline enum usb_device_speed _nbu2ss_get_speed(struct nbu2ss_udc *udc)
+{
+	u32		data;
+	enum usb_device_speed speed = USB_SPEED_FULL;
+
+	data = _nbu2ss_readl(&udc->p_regs->USB_STATUS);
+	if (data & HIGH_SPEED)
+		speed = USB_SPEED_HIGH;
+
+	return speed;
+}
+
+/*-------------------------------------------------------------------------*/
+static void _nbu2ss_epn_set_stall(
+	struct nbu2ss_udc *udc,
+	struct nbu2ss_ep *ep
+)
+{
+	u8	ep_adrs;
+	u32	regdata;
+	int	limit_cnt = 0;
+
+	PT_FC_REGS	preg = udc->p_regs;
+
+	if (ep->direct == USB_DIR_IN) {
+		for (limit_cnt = 0
+			; limit_cnt < IN_DATA_EMPTY_COUNT
+			; limit_cnt++) {
+
+			regdata = _nbu2ss_readl(
+				&preg->EP_REGS[ep->epnum-1].EP_STATUS);
+
+			if ((regdata & EPn_IN_DATA) == 0)
+				break;
+
+			mdelay(1);
+		}
+	}
+
+	ep_adrs = ep->epnum | ep->direct;
+	_nbu2ss_set_endpoint_stall(udc, ep_adrs, 1);
+}
+
+/*-------------------------------------------------------------------------*/
+static int std_req_get_status(struct nbu2ss_udc *udc)
+{
+	u32	length;
+	u16	status_data = 0;
+	u8	recipient = (u8)(udc->ctrl.bRequestType & USB_RECIP_MASK);
+	u8	direction = (u8)(udc->ctrl.bRequestType & USB_DIR_IN);
+	u8	ep_adrs;
+	int	result = -EINVAL;
+
+	if ((0x0000 != udc->ctrl.wValue)
+		|| (USB_DIR_IN != direction)) {
+
+		return result;
+	}
+
+	length = min(udc->ctrl.wLength, (u16)sizeof(status_data));
+
+	switch (recipient) {
+	case USB_RECIP_DEVICE:
+		if (udc->ctrl.wIndex == 0x0000) {
+			if (udc->self_powered)
+				status_data |= (1 << USB_DEVICE_SELF_POWERED);
+
+			if (udc->remote_wakeup)
+				status_data |= (1 << USB_DEVICE_REMOTE_WAKEUP);
+
+			result = 0;
+		}
+		break;
+
+	case USB_RECIP_ENDPOINT:
+		if (0x0000 == (udc->ctrl.wIndex & 0xFF70)) {
+			ep_adrs = (u8)(udc->ctrl.wIndex & 0xFF);
+			result = _nbu2ss_get_ep_stall(udc, ep_adrs);
+
+			if (result > 0)
+				status_data |= (1 << USB_ENDPOINT_HALT);
+		}
+		break;
+
+	default:
+		break;
+	}
+
+	if (result >= 0) {
+		memcpy(udc->ep0_buf, &status_data, length);
+		_nbu2ss_create_ep0_packet(udc, udc->ep0_buf, length);
+		_nbu2ss_ep0_in_transfer(udc, &udc->ep[0], &udc->ep0_req);
+
+	} else {
+		ERR("*** Error GET_STATUS\n");
+	}
+
+	return result;
+}
+
+/*-------------------------------------------------------------------------*/
+static int std_req_clear_feature(struct nbu2ss_udc *udc)
+{
+	return _nbu2ss_req_feature(udc, FALSE);
+}
+
+/*-------------------------------------------------------------------------*/
+static int std_req_set_feature(struct nbu2ss_udc *udc)
+{
+	return _nbu2ss_req_feature(udc, TRUE);
+}
+
+/*-------------------------------------------------------------------------*/
+static int std_req_set_address(struct nbu2ss_udc *udc)
+{
+	int		result = 0;
+	u32		wValue = udc->ctrl.wValue;
+
+	if ((0x00 != udc->ctrl.bRequestType)	||
+		(0x0000 != udc->ctrl.wIndex)	||
+		(0x0000 != udc->ctrl.wLength)) {
+		return -EINVAL;
+	}
+
+	if (wValue != (wValue & 0x007F))
+		return -EINVAL;
+
+	wValue = wValue << USB_ADRS_SHIFT;
+
+	_nbu2ss_writel(&udc->p_regs->USB_ADDRESS, wValue);
+	_nbu2ss_create_ep0_packet(udc, udc->ep0_buf, 0);
+
+	return result;
+}
+
+/*-------------------------------------------------------------------------*/
+static int std_req_set_configuration(struct nbu2ss_udc *udc)
+{
+	u32 ConfigValue = (u32)(udc->ctrl.wValue & 0x00ff);
+
+	if ((0x0000 != udc->ctrl.wIndex)	||
+		(0x0000 != udc->ctrl.wLength)	||
+		(0x00 != udc->ctrl.bRequestType)) {
+		return -EINVAL;
+	}
+
+	udc->curr_config = ConfigValue;
+
+	if (ConfigValue > 0) {
+		_nbu2ss_bitset(&udc->p_regs->USB_CONTROL, CONF);
+		udc->devstate = USB_STATE_CONFIGURED;
+
+	} else {
+		_nbu2ss_bitclr(&udc->p_regs->USB_CONTROL, CONF);
+		udc->devstate = USB_STATE_ADDRESS;
+	}
+
+	return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+static inline void _nbu2ss_read_request_data(struct nbu2ss_udc *udc, u32 *pdata)
+{
+	if ((udc == NULL) && (pdata == NULL))
+		return;
+
+	*pdata = _nbu2ss_readl(&udc->p_regs->SETUP_DATA0);
+	pdata++;
+	*pdata = _nbu2ss_readl(&udc->p_regs->SETUP_DATA1);
+}
+
+/*-------------------------------------------------------------------------*/
+static inline int _nbu2ss_decode_request(struct nbu2ss_udc *udc)
+{
+	bool			bcall_back = TRUE;
+	int			nret = -EINVAL;
+	struct usb_ctrlrequest	*p_ctrl;
+
+	p_ctrl = &udc->ctrl;
+	_nbu2ss_read_request_data(udc, (u32 *)p_ctrl);
+
+	/* ep0 state control */
+	if (p_ctrl->wLength == 0) {
+		udc->ep0state = EP0_IN_STATUS_PHASE;
+
+	} else {
+		if (p_ctrl->bRequestType & USB_DIR_IN)
+			udc->ep0state = EP0_IN_DATA_PHASE;
+		else
+			udc->ep0state = EP0_OUT_DATA_PHASE;
+	}
+
+	if ((p_ctrl->bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD) {
+		switch (p_ctrl->bRequest) {
+		case USB_REQ_GET_STATUS:
+			nret = std_req_get_status(udc);
+			bcall_back = FALSE;
+			break;
+
+		case USB_REQ_CLEAR_FEATURE:
+			nret = std_req_clear_feature(udc);
+			bcall_back = FALSE;
+			break;
+
+		case USB_REQ_SET_FEATURE:
+			nret = std_req_set_feature(udc);
+			bcall_back = FALSE;
+			break;
+
+		case USB_REQ_SET_ADDRESS:
+			nret = std_req_set_address(udc);
+			bcall_back = FALSE;
+			break;
+
+		case USB_REQ_SET_CONFIGURATION:
+			nret = std_req_set_configuration(udc);
+			break;
+
+		default:
+			break;
+		}
+	}
+
+	if (bcall_back == FALSE) {
+		if (udc->ep0state == EP0_IN_STATUS_PHASE) {
+			if (nret >= 0) {
+				/*--------------------------------------*/
+				/* Status Stage */
+				nret = EP0_send_NULL(udc, TRUE);
+			}
+		}
+
+	} else {
+		spin_unlock(&udc->lock);
+		nret = udc->driver->setup(&udc->gadget, &udc->ctrl);
+		spin_lock(&udc->lock);
+	}
+
+	if (nret < 0)
+		udc->ep0state = EP0_IDLE;
+
+	return nret;
+}
+
+/*-------------------------------------------------------------------------*/
+static inline int _nbu2ss_ep0_in_data_stage(struct nbu2ss_udc *udc)
+{
+	int			nret;
+	struct nbu2ss_req	*req;
+	struct nbu2ss_ep	*ep = &udc->ep[0];
+
+	if (list_empty(&ep->queue))
+		req = NULL;
+	else
+		req = list_entry(ep->queue.next, struct nbu2ss_req, queue);
+
+	if (req == NULL)
+		req = &udc->ep0_req;
+
+	req->req.actual += req->div_len;
+	req->div_len = 0;
+
+	nret = _nbu2ss_ep0_in_transfer(udc, ep, req);
+	if (nret == 0) {
+		udc->ep0state = EP0_OUT_STATUS_PAHSE;
+		EP0_receive_NULL(udc, TRUE);
+	}
+
+	return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+static inline int _nbu2ss_ep0_out_data_stage(struct nbu2ss_udc *udc)
+{
+	int			nret;
+	struct nbu2ss_req	*req;
+	struct nbu2ss_ep	*ep = &udc->ep[0];
+
+	if (list_empty(&ep->queue))
+		req = NULL;
+	else
+		req = list_entry(ep->queue.next, struct nbu2ss_req, queue);
+
+	if (req == NULL)
+		req = &udc->ep0_req;
+
+	nret = _nbu2ss_ep0_out_transfer(udc, ep, req);
+	if (nret == 0) {
+		udc->ep0state = EP0_IN_STATUS_PHASE;
+		EP0_send_NULL(udc, TRUE);
+
+	} else if (nret < 0) {
+		_nbu2ss_bitset(&udc->p_regs->EP0_CONTROL, EP0_BCLR);
+		req->req.status = nret;
+	}
+
+	return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+static inline int _nbu2ss_ep0_status_stage(struct nbu2ss_udc *udc)
+{
+	struct nbu2ss_req	*req;
+	struct nbu2ss_ep	*ep = &udc->ep[0];
+
+	if (list_empty(&ep->queue))
+		req = NULL;
+	else
+		req = list_entry(ep->queue.next, struct nbu2ss_req, queue);
+
+	if (req == NULL) {
+		req = &udc->ep0_req;
+		if (req->req.complete)
+			req->req.complete(&ep->ep, &req->req);
+
+	} else {
+		if (req->req.complete)
+			_nbu2ss_ep_done(ep, req, 0);
+	}
+
+	udc->ep0state = EP0_IDLE;
+
+	return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+static inline void _nbu2ss_ep0_int(struct nbu2ss_udc *udc)
+{
+	int		i;
+	u32		status;
+	u32		intr;
+	int		nret = -1;
+
+	status = _nbu2ss_readl(&udc->p_regs->EP0_STATUS);
+	intr = status & EP0_STATUS_RW_BIT;
+	_nbu2ss_writel(&udc->p_regs->EP0_STATUS, ~(u32)intr);
+
+	status &= (SETUP_INT | EP0_IN_INT | EP0_OUT_INT
+			| STG_END_INT | EP0_OUT_NULL_INT);
+
+	if (status == 0) {
+		pr_info("--- %s Not Decode Interrupt\n", __func__);
+		pr_info("--- EP0_STATUS = 0x%08x\n", intr);
+		return;
+	}
+
+	if (udc->gadget.speed == USB_SPEED_UNKNOWN)
+		udc->gadget.speed = _nbu2ss_get_speed(udc);
+
+	for (i = 0; i < EP0_END_XFER; i++) {
+		switch (udc->ep0state) {
+		case EP0_IDLE:
+			if (status & SETUP_INT) {
+				status = 0;
+				nret = _nbu2ss_decode_request(udc);
+			}
+			break;
+
+		case EP0_IN_DATA_PHASE:
+			if (status & EP0_IN_INT) {
+				status &= ~EP0_IN_INT;
+				nret = _nbu2ss_ep0_in_data_stage(udc);
+			}
+			break;
+
+		case EP0_OUT_DATA_PHASE:
+			if (status & EP0_OUT_INT) {
+				status &= ~EP0_OUT_INT;
+				nret = _nbu2ss_ep0_out_data_stage(udc);
+			}
+			break;
+
+		case EP0_IN_STATUS_PHASE:
+			if ((status & STG_END_INT) || (status & SETUP_INT)) {
+				status &= ~(STG_END_INT | EP0_IN_INT);
+				nret = _nbu2ss_ep0_status_stage(udc);
+			}
+			break;
+
+		case EP0_OUT_STATUS_PAHSE:
+			if ((status & STG_END_INT)
+			|| (status & SETUP_INT)
+			|| (status & EP0_OUT_NULL_INT)) {
+				status &= ~(STG_END_INT
+						| EP0_OUT_INT
+						| EP0_OUT_NULL_INT);
+
+				nret = _nbu2ss_ep0_status_stage(udc);
+			}
+
+			break;
+
+		default:
+			status = 0;
+			break;
+		}
+
+		if (status == 0)
+			break;
+	}
+
+	if (nret < 0) {
+		/* Send Stall */
+		_nbu2ss_set_endpoint_stall(udc, 0, TRUE);
+	}
+}
+
+/*-------------------------------------------------------------------------*/
+static void _nbu2ss_ep_done(
+	struct nbu2ss_ep *ep,
+	struct nbu2ss_req *req,
+	int status)
+{
+	struct nbu2ss_udc *udc = ep->udc;
+
+	list_del_init(&req->queue);
+
+	if (status == -ECONNRESET)
+		_nbu2ss_fifo_flush(udc, ep);
+
+	if (likely(req->req.status == -EINPROGRESS))
+		req->req.status = status;
+
+	if (ep->stalled)
+		_nbu2ss_epn_set_stall(udc, ep);
+	else {
+		if (!list_empty(&ep->queue))
+			_nbu2ss_restert_transfer(ep);
+	}
+
+#ifdef USE_DMA
+	if ((ep->direct == USB_DIR_OUT) && (ep->epnum > 0) &&
+			(req->req.dma != 0))
+		_nbu2ss_dma_unmap_single(udc, ep, req, USB_DIR_OUT);
+#endif
+
+	spin_unlock(&udc->lock);
+	req->req.complete(&ep->ep, &req->req);
+	spin_lock(&udc->lock);
+}
+
+/*-------------------------------------------------------------------------*/
+static inline void _nbu2ss_epn_in_int(
+	struct nbu2ss_udc *udc,
+	struct nbu2ss_ep *ep,
+	struct nbu2ss_req *req)
+{
+	int	result = 0;
+	u32	status;
+
+	PT_FC_REGS	preg = udc->p_regs;
+
+	if (req->dma_flag)
+		return;		/* DMA is forwarded */
+
+	req->req.actual += req->div_len;
+	req->div_len = 0;
+
+	if (req->req.actual != req->req.length) {
+		/*---------------------------------------------------------*/
+		/* remainder of data */
+		result = _nbu2ss_epn_in_transfer(udc, ep, req);
+
+	} else {
+		if ((req->zero != 0)
+		&& ((req->req.actual % ep->ep.maxpacket) == 0)) {
+
+			status =
+			_nbu2ss_readl(&preg->EP_REGS[ep->epnum-1].EP_STATUS);
+
+			if ((status & EPn_IN_FULL) == 0) {
+				/*-----------------------------------------*/
+				/* 0 Length Packet */
+				req->zero = 0;
+				_nbu2ss_zero_len_pkt(udc, ep->epnum);
+			}
+			return;
+		}
+	}
+
+	if (result <= 0) {
+		/*---------------------------------------------------------*/
+		/* Complete */
+		_nbu2ss_ep_done(ep, req, result);
+	}
+}
+
+/*-------------------------------------------------------------------------*/
+static inline void _nbu2ss_epn_out_int(
+	struct nbu2ss_udc *udc,
+	struct nbu2ss_ep *ep,
+	struct nbu2ss_req *req)
+{
+	int	result;
+
+	result = _nbu2ss_epn_out_transfer(udc, ep, req);
+	if (result <= 0)
+		_nbu2ss_ep_done(ep, req, result);
+
+	return;
+}
+
+/*-------------------------------------------------------------------------*/
+static inline void _nbu2ss_epn_in_dma_int(
+	struct nbu2ss_udc *udc,
+	struct nbu2ss_ep *ep,
+	struct nbu2ss_req *req)
+{
+	u32		mpkt;
+	u32		size;
+	struct usb_request *preq;
+
+	preq = &req->req;
+
+	if (req->dma_flag == FALSE)
+		return;
+
+	preq->actual += req->div_len;
+	req->div_len = 0;
+	req->dma_flag = FALSE;
+
+#ifdef USE_DMA
+	_nbu2ss_dma_unmap_single(udc, ep, req, USB_DIR_IN);
+#endif
+
+	if (preq->actual != preq->length) {
+		_nbu2ss_epn_in_transfer(udc, ep, req);
+	} else {
+		mpkt = ep->ep.maxpacket;
+		size = preq->actual % mpkt;
+		if (size > 0) {
+			if (((preq->actual & 0x03) == 0) && (size < mpkt))
+				_nbu2ss_ep_in_end(udc, ep->epnum, 0, 0);
+		} else {
+			_nbu2ss_epn_in_int(udc, ep, req);
+		}
+	}
+
+	return;
+}
+
+/*-------------------------------------------------------------------------*/
+static inline void _nbu2ss_epn_out_dma_int(
+	struct nbu2ss_udc *udc,
+	struct nbu2ss_ep *ep,
+	struct nbu2ss_req *req)
+{
+	int		i;
+	u32		num;
+	u32		dmacnt, ep_dmacnt;
+	u32		mpkt;
+	PT_FC_REGS	preg = udc->p_regs;
+
+	num = ep->epnum - 1;
+
+	if (req->req.actual == req->req.length) {
+		if ((req->req.length % ep->ep.maxpacket)
+				&& (req->zero == 0)) {
+			req->div_len = 0;
+			req->dma_flag = FALSE;
+			_nbu2ss_ep_done(ep, req, 0);
+			return;
+		}
+	}
+
+	ep_dmacnt = _nbu2ss_readl(&preg->EP_REGS[num].EP_LEN_DCNT)
+		 & EPn_DMACNT;
+	ep_dmacnt >>= 16;
+
+	for (i = 0; i < EPC_PLL_LOCK_COUNT; i++) {
+		dmacnt = _nbu2ss_readl(&preg->EP_DCR[num].EP_DCR1)
+			 & DCR1_EPn_DMACNT;
+		dmacnt >>= 16;
+		if (ep_dmacnt == dmacnt)
+			break;
+	}
+
+	_nbu2ss_bitclr(&preg->EP_DCR[num].EP_DCR1, DCR1_EPn_REQEN);
+
+	if (dmacnt != 0) {
+		mpkt = ep->ep.maxpacket;
+		if ((req->div_len % mpkt) == 0)
+			req->div_len -= mpkt * dmacnt;
+	}
+
+	if ((req->req.actual % ep->ep.maxpacket) > 0) {
+		if (req->req.actual == req->div_len) {
+			req->div_len = 0;
+			req->dma_flag = FALSE;
+			_nbu2ss_ep_done(ep, req, 0);
+			return;
+		}
+	}
+
+	req->req.actual += req->div_len;
+	req->div_len = 0;
+	req->dma_flag = FALSE;
+
+	_nbu2ss_epn_out_int(udc, ep, req);
+}
+
+/*-------------------------------------------------------------------------*/
+static inline void _nbu2ss_epn_int(struct nbu2ss_udc *udc, u32 epnum)
+{
+	u32	num;
+	u32	status;
+
+	struct nbu2ss_req	*req;
+	struct nbu2ss_ep	*ep = &udc->ep[epnum];
+
+	num = epnum - 1;
+
+	/* Interrupt Status */
+	status = _nbu2ss_readl(&udc->p_regs->EP_REGS[num].EP_STATUS);
+
+	/* Interrupt Clear */
+	_nbu2ss_writel(&udc->p_regs->EP_REGS[num].EP_STATUS, ~(u32)status);
+
+	if (list_empty(&ep->queue))
+		req = NULL;
+	else
+		req = list_entry(ep->queue.next, struct nbu2ss_req, queue);
+
+	if (req == NULL) {
+		/* pr_warning("=== %s(%d) req == NULL\n", __func__, epnum); */
+		return;
+	}
+
+	if (status & EPn_OUT_END_INT) {
+		status &= ~EPn_OUT_INT;
+		_nbu2ss_epn_out_dma_int(udc, ep, req);
+	}
+
+	if (status & EPn_OUT_INT)
+		_nbu2ss_epn_out_int(udc, ep, req);
+
+	if (status & EPn_IN_END_INT) {
+		status &= ~EPn_IN_INT;
+		_nbu2ss_epn_in_dma_int(udc, ep, req);
+	}
+
+	if (status & EPn_IN_INT)
+		_nbu2ss_epn_in_int(udc, ep, req);
+}
+
+/*-------------------------------------------------------------------------*/
+static inline void _nbu2ss_ep_int(struct nbu2ss_udc *udc, u32 epnum)
+{
+	if (epnum == 0)
+		_nbu2ss_ep0_int(udc);
+	else
+		_nbu2ss_epn_int(udc, epnum);
+}
+
+/*-------------------------------------------------------------------------*/
+static void _nbu2ss_ep0_enable(struct nbu2ss_udc *udc)
+{
+	_nbu2ss_bitset(&udc->p_regs->EP0_CONTROL, (EP0_AUTO | EP0_BCLR));
+	_nbu2ss_writel(&udc->p_regs->EP0_INT_ENA, EP0_INT_EN_BIT);
+
+	return;
+}
+
+#if 0
+/*-------------------------------------------------------------------------*/
+static void _nbu2ss_ep0_disable(struct nbu2ss_udc *udc)
+{
+	_nbu2ss_bitclr(&udc->p_regs->EP0_INT_ENA, EP0_INT_EN_BIT);
+
+	_nbu2ss_bitset(&udc->p_regs->EP0_CONTROL
+			, (EP0_BCLR | EP0_INAK | EP0_ONAK | EP0_BCLR));
+
+	_nbu2ss_bitclr(&udc->p_regs->EP0_CONTROL, EP0_AUTO);
+
+	return;
+}
+#endif
+
+/*-------------------------------------------------------------------------*/
+static int _nbu2ss_nuke(struct nbu2ss_udc *udc,
+			struct nbu2ss_ep *ep,
+			int status)
+{
+	struct nbu2ss_req *req;
+
+	/* Endpoint Disable */
+	_nbu2ss_epn_exit(udc, ep);
+
+	/* DMA Disable */
+	_nbu2ss_ep_dma_exit(udc, ep);
+
+	if (list_empty(&ep->queue))
+		return 0;
+
+	/* called with irqs blocked */
+	while (!list_empty(&ep->queue)) {
+		req = list_entry(ep->queue.next, struct nbu2ss_req, queue);
+		_nbu2ss_ep_done(ep, req, status);
+	}
+
+	return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+static void _nbu2ss_quiesce(struct nbu2ss_udc *udc)
+{
+	struct nbu2ss_ep	*ep;
+
+	udc->gadget.speed = USB_SPEED_UNKNOWN;
+
+	_nbu2ss_nuke(udc, &udc->ep[0], -ESHUTDOWN);
+
+	/* Endpoint n */
+	list_for_each_entry(ep, &udc->gadget.ep_list, ep.ep_list) {
+		_nbu2ss_nuke(udc, ep, -ESHUTDOWN);
+	}
+}
+
+/*-------------------------------------------------------------------------*/
+static int _nbu2ss_pullup(struct nbu2ss_udc *udc, int is_on)
+{
+	u32	reg_dt;
+
+	if (!udc) {
+		ERR("%s, bad param\n", __func__);
+		return -EINVAL;
+	}
+
+	if (udc->vbus_active == 0)
+		return -ESHUTDOWN;
+
+	if (is_on) {
+		/* D+ Pullup */
+/*		INFO(" --- D+ Pullup\n"); */
+
+		if (udc->driver) {
+			reg_dt = (_nbu2ss_readl(&udc->p_regs->USB_CONTROL)
+				| PUE2) & ~(u32)CONNECTB;
+
+			_nbu2ss_writel(&udc->p_regs->USB_CONTROL, reg_dt);
+		}
+
+	} else {
+		/* D+ Pulldown */
+/*		INFO(" --- D+ Pulldown\n"); */
+
+		reg_dt = (_nbu2ss_readl(&udc->p_regs->USB_CONTROL) | CONNECTB)
+			& ~(u32)PUE2;
+
+		_nbu2ss_writel(&udc->p_regs->USB_CONTROL, reg_dt);
+		udc->gadget.speed = USB_SPEED_UNKNOWN;
+	}
+
+	return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+static void _nbu2ss_fifo_flush(struct nbu2ss_udc *udc, struct nbu2ss_ep *ep)
+{
+	PT_FC_REGS	p = udc->p_regs;
+
+	if (udc->vbus_active == 0)
+		return;
+
+	if (ep->epnum == 0) {
+		/* EP0 */
+		_nbu2ss_bitset(&p->EP0_CONTROL, EP0_BCLR);
+
+	} else {
+		/* EPn */
+		_nbu2ss_ep_dma_abort(udc, ep);
+		_nbu2ss_bitset(&p->EP_REGS[ep->epnum - 1].EP_CONTROL, EPn_BCLR);
+	}
+}
+
+/*-------------------------------------------------------------------------*/
+static int _nbu2ss_enable_controller(struct nbu2ss_udc *udc)
+{
+	int	waitcnt = 0;
+
+	if (udc->udc_enabled)
+		return 0;
+
+#if 0
+	emxx_open_clockgate(EMXX_CLK_USB1);
+	/* emxx_clkctrl_off(EMXX_CLKCTRL_USB1); */
+	/* emxx_clkctrl_on(EMXX_CLKCTRL_USB1); */
+	emxx_unreset_device(EMXX_RST_USB1);
+#endif
+	/*
+		Reset
+	*/
+	_nbu2ss_bitset(&udc->p_regs->EPCTR, (DIRPD | EPC_RST));
+	udelay(EPC_RST_DISABLE_TIME);	/* 1us wait */
+
+	_nbu2ss_bitclr(&udc->p_regs->EPCTR, DIRPD);
+	mdelay(EPC_DIRPD_DISABLE_TIME);	/* 1ms wait */
+
+	_nbu2ss_bitclr(&udc->p_regs->EPCTR, EPC_RST);
+
+	_nbu2ss_writel(&udc->p_regs->AHBSCTR, WAIT_MODE);
+
+#if 0
+	/* DMA Mode Setting */
+	if ((system_rev & EMXX_REV_MASK) == EMXX_REV_ES1) {
+		_nbu2ss_bitset(&udc->p_regs->AHBMCTR, BURST_TYPE);
+		_nbu2ss_bitclr(&udc->p_regs->AHBMCTR, HTRANS_MODE);
+	} else
+#endif
+		_nbu2ss_writel(&udc->p_regs->AHBMCTR,
+			HBUSREQ_MODE | HTRANS_MODE | WBURST_TYPE);
+
+	while (!(_nbu2ss_readl(&udc->p_regs->EPCTR) & PLL_LOCK)) {
+		waitcnt++;
+		udelay(1);	/* 1us wait */
+		if (waitcnt == EPC_PLL_LOCK_COUNT) {
+			ERR("*** Reset Cancel failed\n");
+			return -EINVAL;
+		}
+	};
+
+#if 0
+	if ((system_rev & EMXX_REV_MASK) < EMXX_REV_ES3)
+#endif
+		_nbu2ss_bitset(&udc->p_regs->UTMI_CHARACTER_1, USB_SQUSET);
+
+	_nbu2ss_bitset(&udc->p_regs->USB_CONTROL, (INT_SEL | SOF_RCV));
+
+	/* EP0 */
+	_nbu2ss_ep0_enable(udc);
+
+	/* USB Interrupt Enable */
+	_nbu2ss_bitset(&udc->p_regs->USB_INT_ENA, USB_INT_EN_BIT);
+
+	udc->udc_enabled = TRUE;
+
+	return 0;
+}
+
+
+/*-------------------------------------------------------------------------*/
+static void _nbu2ss_reset_controller(struct nbu2ss_udc *udc)
+{
+	_nbu2ss_bitset(&udc->p_regs->EPCTR, EPC_RST);
+	_nbu2ss_bitclr(&udc->p_regs->EPCTR, EPC_RST);
+}
+
+/*-------------------------------------------------------------------------*/
+static void _nbu2ss_disable_controller(struct nbu2ss_udc *udc)
+{
+	if (udc->udc_enabled) {
+		udc->udc_enabled = FALSE;
+		_nbu2ss_reset_controller(udc);
+		_nbu2ss_bitset(&udc->p_regs->EPCTR, (DIRPD | EPC_RST));
+	}
+#if 0
+	emxx_reset_device(EMXX_RST_USB1);
+	/* emxx_clkctrl_on(EMXX_CLKCTRL_USB1); */
+	emxx_close_clockgate(EMXX_CLK_USB1);
+#endif
+}
+
+/*-------------------------------------------------------------------------*/
+static inline void _nbu2ss_check_vbus(struct nbu2ss_udc *udc)
+{
+	int	nret;
+	u32	reg_dt;
+
+	/* chattering */
+	mdelay(VBUS_CHATTERING_MDELAY);		/* wait (ms) */
+
+	/* VBUS ON Check*/
+	reg_dt = gpio_get_value(VBUS_VALUE);
+	if (reg_dt == 0) {
+
+		udc->linux_suspended = 0;
+
+		_nbu2ss_reset_controller(udc);
+		pr_info(" ----- VBUS OFF\n");
+
+		if (udc->vbus_active == 1) {
+			/* VBUS OFF */
+			udc->vbus_active = 0;
+			if (udc->usb_suspended) {
+				udc->usb_suspended = 0;
+				/* _nbu2ss_reset_controller(udc); */
+			}
+			udc->devstate = USB_STATE_NOTATTACHED;
+
+			_nbu2ss_quiesce(udc);
+			if (udc->driver) {
+				spin_unlock(&udc->lock);
+				udc->driver->disconnect(&udc->gadget);
+				spin_lock(&udc->lock);
+			}
+
+			_nbu2ss_disable_controller(udc);
+		}
+	} else {
+		mdelay(5);		/* wait (5ms) */
+		reg_dt = gpio_get_value(VBUS_VALUE);
+		if (reg_dt == 0)
+			return;
+
+		pr_info(" ----- VBUS ON\n");
+
+		if (udc->linux_suspended)
+			return;
+
+		if (udc->vbus_active == 0) {
+			/* VBUS ON */
+			udc->vbus_active = 1;
+			udc->devstate = USB_STATE_POWERED;
+
+			nret = _nbu2ss_enable_controller(udc);
+			if (nret < 0) {
+				_nbu2ss_disable_controller(udc);
+				udc->vbus_active = 0;
+				return;
+			}
+
+			_nbu2ss_pullup(udc, 1);
+
+#ifdef UDC_DEBUG_DUMP
+			_nbu2ss_dump_register(udc);
+#endif /* UDC_DEBUG_DUMP */
+
+		} else {
+			if (udc->devstate == USB_STATE_POWERED)
+				_nbu2ss_pullup(udc, 1);
+		}
+	}
+
+	return;
+}
+
+/*-------------------------------------------------------------------------*/
+static inline void _nbu2ss_int_bus_reset(struct nbu2ss_udc *udc)
+{
+	udc->devstate		= USB_STATE_DEFAULT;
+	udc->remote_wakeup	= 0;
+
+	_nbu2ss_quiesce(udc);
+
+	udc->ep0state = EP0_IDLE;
+}
+
+/*-------------------------------------------------------------------------*/
+static inline void _nbu2ss_int_usb_resume(struct nbu2ss_udc *udc)
+{
+	if (udc->usb_suspended == 1) {
+		udc->usb_suspended = 0;
+		if (udc->driver && udc->driver->resume) {
+			spin_unlock(&udc->lock);
+			udc->driver->resume(&udc->gadget);
+			spin_lock(&udc->lock);
+		}
+	}
+}
+
+/*-------------------------------------------------------------------------*/
+static inline void _nbu2ss_int_usb_suspend(struct nbu2ss_udc *udc)
+{
+	u32	reg_dt;
+
+	if (udc->usb_suspended == 0) {
+		reg_dt = gpio_get_value(VBUS_VALUE);
+
+		if (reg_dt == 0)
+			return;
+
+		udc->usb_suspended = 1;
+		if (udc->driver && udc->driver->suspend) {
+			spin_unlock(&udc->lock);
+			udc->driver->suspend(&udc->gadget);
+			spin_lock(&udc->lock);
+		}
+
+		_nbu2ss_bitset(&udc->p_regs->USB_CONTROL, SUSPEND);
+	}
+}
+
+/*-------------------------------------------------------------------------*/
+/* VBUS (GPIO153) Interrupt */
+static irqreturn_t _nbu2ss_vbus_irq(int irq, void *_udc)
+{
+	struct nbu2ss_udc	*udc = (struct nbu2ss_udc *)_udc;
+
+	spin_lock(&udc->lock);
+	_nbu2ss_check_vbus(udc);
+	spin_unlock(&udc->lock);
+
+	return IRQ_HANDLED;
+}
+
+/*-------------------------------------------------------------------------*/
+/* Interrupt (udc) */
+static irqreturn_t _nbu2ss_udc_irq(int irq, void *_udc)
+{
+	u8	suspend_flag = 0;
+	u32	status;
+	u32	epnum, int_bit;
+
+	struct nbu2ss_udc	*udc = (struct nbu2ss_udc *)_udc;
+	PT_FC_REGS		preg = udc->p_regs;
+
+	if (gpio_get_value(VBUS_VALUE) == 0) {
+		_nbu2ss_writel(&preg->USB_INT_STA, ~USB_INT_STA_RW);
+		_nbu2ss_writel(&preg->USB_INT_ENA, 0);
+		return IRQ_HANDLED;
+	}
+
+	spin_lock(&udc->lock);
+
+	for (;;) {
+		if (gpio_get_value(VBUS_VALUE) == 0) {
+			_nbu2ss_writel(&preg->USB_INT_STA, ~USB_INT_STA_RW);
+			_nbu2ss_writel(&preg->USB_INT_ENA, 0);
+			status = 0;
+		} else
+			status = _nbu2ss_readl(&preg->USB_INT_STA);
+
+		if (status == 0)
+			break;
+
+		_nbu2ss_writel(&preg->USB_INT_STA, ~(status & USB_INT_STA_RW));
+
+		if (status & USB_RST_INT) {
+			/* USB Reset */
+			_nbu2ss_int_bus_reset(udc);
+		}
+
+		if (status & RSUM_INT) {
+			/* Resume */
+			_nbu2ss_int_usb_resume(udc);
+		}
+
+		if (status & SPND_INT) {
+			/* Suspend */
+			suspend_flag = 1;
+		}
+
+		if (status & EPn_INT) {
+			/* EP INT */
+			int_bit = status >> 8;
+
+			for (epnum = 0; epnum < NUM_ENDPOINTS; epnum++) {
+
+				if (0x01 & int_bit)
+					_nbu2ss_ep_int(udc, epnum);
+
+				int_bit >>= 1;
+
+				if (int_bit == 0)
+					break;
+			}
+		}
+	}
+
+	if (suspend_flag)
+		_nbu2ss_int_usb_suspend(udc);
+
+	spin_unlock(&udc->lock);
+
+	return IRQ_HANDLED;
+}
+
+/*-------------------------------------------------------------------------*/
+/* usb_ep_ops */
+static int nbu2ss_ep_enable(
+	struct usb_ep *_ep,
+	const struct usb_endpoint_descriptor *desc)
+{
+	u8		ep_type;
+	unsigned long	flags;
+
+	struct nbu2ss_ep	*ep;
+	struct nbu2ss_udc	*udc;
+
+	if ((_ep == NULL) || (desc == NULL)) {
+		ERR(" *** %s, bad param\n", __func__);
+		return -EINVAL;
+	}
+
+	ep = container_of(_ep, struct nbu2ss_ep, ep);
+	if ((ep == NULL) || (ep->udc == NULL)) {
+		ERR(" *** %s, ep == NULL !!\n", __func__);
+		return -EINVAL;
+	}
+
+	ep_type = desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK;
+	if ((ep_type == USB_ENDPOINT_XFER_CONTROL)
+		|| (ep_type == USB_ENDPOINT_XFER_ISOC)) {
+
+		ERR(" *** %s, bat bmAttributes\n", __func__);
+		return -EINVAL;
+	}
+
+	udc = ep->udc;
+	if (udc->vbus_active == 0)
+		return -ESHUTDOWN;
+
+	if ((udc->driver == NULL)
+		|| (udc->gadget.speed == USB_SPEED_UNKNOWN)) {
+
+		ERR(" *** %s, udc !!\n", __func__);
+		return -ESHUTDOWN;
+	}
+
+	spin_lock_irqsave(&udc->lock, flags);
+
+	ep->desc = desc;
+	ep->epnum = desc->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK;
+	ep->direct = desc->bEndpointAddress & USB_ENDPOINT_DIR_MASK;
+	ep->ep_type = ep_type;
+	ep->wedged = 0;
+	ep->halted = FALSE;
+	ep->stalled = FALSE;
+
+	ep->ep.maxpacket = le16_to_cpu(desc->wMaxPacketSize);
+
+	/* DMA setting */
+	_nbu2ss_ep_dma_init(udc, ep);
+
+	/* Endpoint setting */
+	_nbu2ss_ep_init(udc, ep);
+
+	spin_unlock_irqrestore(&udc->lock, flags);
+
+	return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+static int nbu2ss_ep_disable(struct usb_ep *_ep)
+{
+	struct nbu2ss_ep	*ep;
+	struct nbu2ss_udc	*udc;
+	unsigned long		flags;
+
+	if (_ep == NULL) {
+		ERR(" *** %s, bad param\n", __func__);
+		return -EINVAL;
+	}
+
+	ep = container_of(_ep, struct nbu2ss_ep, ep);
+	if ((ep == NULL) || (ep->udc == NULL)) {
+		ERR(" *** %s, ep == NULL !!\n", __func__);
+		return -EINVAL;
+	}
+
+	udc = ep->udc;
+	if (udc->vbus_active == 0)
+		return -ESHUTDOWN;
+
+	spin_lock_irqsave(&udc->lock, flags);
+	_nbu2ss_nuke(udc, ep, -EINPROGRESS);		/* dequeue request */
+	spin_unlock_irqrestore(&udc->lock, flags);
+
+	return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+static struct usb_request *nbu2ss_ep_alloc_request(
+	struct usb_ep *ep,
+	gfp_t gfp_flags)
+{
+	struct nbu2ss_req *req;
+
+	req = kzalloc(sizeof(*req), gfp_flags);
+	if (!req)
+		return 0;
+
+#ifdef USE_DMA
+	req->req.dma = DMA_ADDR_INVALID;
+#endif
+	INIT_LIST_HEAD(&req->queue);
+
+	return &req->req;
+}
+
+/*-------------------------------------------------------------------------*/
+static void nbu2ss_ep_free_request(
+	struct usb_ep *_ep,
+	struct usb_request *_req)
+{
+	struct nbu2ss_req *req;
+
+	if (_req != NULL) {
+		req = container_of(_req, struct nbu2ss_req, req);
+
+		if (req != NULL)
+			kfree(req);
+	}
+}
+
+/*-------------------------------------------------------------------------*/
+static int nbu2ss_ep_queue(
+	struct usb_ep *_ep,
+	struct usb_request *_req,
+	gfp_t gfp_flags)
+{
+	struct nbu2ss_req	*req;
+	struct nbu2ss_ep	*ep;
+	struct nbu2ss_udc	*udc;
+	unsigned long		flags;
+	bool			bflag;
+	int			result = -EINVAL;
+
+	/* catch various bogus parameters */
+	if ((_ep == NULL) || (_req == NULL)) {
+		if (_ep == NULL)
+			ERR("*** %s --- _ep == NULL\n", __func__);
+
+		if (_req == NULL)
+			ERR("*** %s --- _req == NULL\n", __func__);
+
+		return -EINVAL;
+	}
+
+	req = container_of(_req, struct nbu2ss_req, req);
+	if (unlikely
+	    (!_req->complete || !_req->buf
+	     || !list_empty(&req->queue))) {
+
+		if (!_req->complete)
+			ERR("*** %s --- !_req->complete\n", __func__);
+
+		if (!_req->buf)
+			ERR("*** %s --- !_req->buf\n", __func__);
+
+		if (!list_empty(&req->queue))
+			ERR("*** %s --- !list_empty(&req->queue)\n", __func__);
+
+		return -EINVAL;
+	}
+
+	ep = container_of(_ep, struct nbu2ss_ep, ep);
+	udc = ep->udc;
+
+/*	INFO("=== %s(ep%d), zero=%d\n", __func__, ep->epnum, _req->zero); */
+
+	if (udc->vbus_active == 0) {
+		pr_info("Can't ep_queue (VBUS OFF)\n");
+		return -ESHUTDOWN;
+	}
+
+	if (unlikely(!udc->driver)) {
+		ERR("%s, bogus device state %p\n", __func__, udc->driver);
+		return -ESHUTDOWN;
+	}
+
+	spin_lock_irqsave(&udc->lock, flags);
+
+#ifdef USE_DMA
+	if ((u32)req->req.buf & 0x3)
+		req->unaligned = TRUE;
+	else
+		req->unaligned = FALSE;
+
+	if (req->unaligned) {
+		if (ep->virt_buf == NULL)
+			ep->virt_buf = (u8 *)dma_alloc_coherent(
+				NULL, PAGE_SIZE,
+				&ep->phys_buf, GFP_KERNEL | GFP_DMA);
+		if (ep->epnum > 0)  {
+			if (ep->direct == USB_DIR_IN)
+				memcpy(ep->virt_buf, req->req.buf,
+					req->req.length);
+		}
+	}
+
+	if ((ep->epnum > 0) && (ep->direct == USB_DIR_OUT) &&
+			(req->req.dma != 0))
+		_nbu2ss_dma_map_single(udc, ep, req, USB_DIR_OUT);
+#endif
+
+	_req->status = -EINPROGRESS;
+	_req->actual = 0;
+
+	bflag = list_empty(&ep->queue);
+	list_add_tail(&req->queue, &ep->queue);
+
+	if ((bflag != FALSE) && (ep->stalled == FALSE)) {
+
+		result = _nbu2ss_start_transfer(udc, ep, req, FALSE);
+		if (result < 0) {
+			ERR(" *** %s, result = %d\n", __func__, result);
+			list_del(&req->queue);
+		} else if ((ep->epnum > 0) && (ep->direct == USB_DIR_OUT)) {
+#ifdef USE_DMA
+			if (req->req.length < 4 &&
+				req->req.length == req->req.actual)
+#else
+			if (req->req.length == req->req.actual)
+#endif
+				_nbu2ss_ep_done(ep, req, result);
+		}
+	}
+
+	spin_unlock_irqrestore(&udc->lock, flags);
+
+	return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+static int nbu2ss_ep_dequeue(
+	struct usb_ep *_ep,
+	struct usb_request *_req)
+{
+	struct nbu2ss_req	*req;
+	struct nbu2ss_ep	*ep;
+	struct nbu2ss_udc	*udc;
+	unsigned long flags;
+
+	/*INFO("=== %s()\n", __func__);*/
+
+	/* catch various bogus parameters */
+	if ((_ep == NULL) || (_req == NULL)) {
+		/* ERR("%s, bad param(1)\n", __func__); */
+		return -EINVAL;
+	}
+
+	ep = container_of(_ep, struct nbu2ss_ep, ep);
+	if (!ep) {
+		ERR("%s, ep == NULL !!\n", __func__);
+		return -EINVAL;
+	}
+
+	udc = ep->udc;
+	if (udc == NULL)
+		return -EINVAL;
+
+	spin_lock_irqsave(&udc->lock, flags);
+
+	/* make sure it's actually queued on this endpoint */
+	list_for_each_entry(req, &ep->queue, queue) {
+		if (&req->req == _req)
+			break;
+	}
+	if (&req->req != _req) {
+		spin_unlock_irqrestore(&udc->lock, flags);
+		pr_debug("%s no queue(EINVAL)\n", __func__);
+		return -EINVAL;
+	}
+
+	_nbu2ss_ep_done(ep, req, -ECONNRESET);
+
+	spin_unlock_irqrestore(&udc->lock, flags);
+
+	return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+static int nbu2ss_ep_set_halt(struct usb_ep *_ep, int value)
+{
+	u8		ep_adrs;
+	unsigned long	flags;
+
+	struct nbu2ss_ep	*ep;
+	struct nbu2ss_udc	*udc;
+
+/*	INFO("=== %s()\n", __func__); */
+
+	if (!_ep) {
+		ERR("%s, bad param\n", __func__);
+		return -EINVAL;
+	}
+
+	ep = container_of(_ep, struct nbu2ss_ep, ep);
+	if (!ep) {
+		ERR("%s, bad ep\n", __func__);
+		return -EINVAL;
+	}
+
+	udc = ep->udc;
+	if (!udc) {
+		ERR(" *** %s, bad udc\n", __func__);
+		return -EINVAL;
+	}
+
+	spin_lock_irqsave(&udc->lock, flags);
+
+	ep_adrs = ep->epnum | ep->direct;
+	if (value == 0) {
+		_nbu2ss_set_endpoint_stall(udc, ep_adrs, value);
+		ep->stalled = FALSE;
+	} else {
+		if (list_empty(&ep->queue))
+			_nbu2ss_epn_set_stall(udc, ep);
+		else
+			ep->stalled = TRUE;
+	}
+
+	if (value == 0)
+		ep->wedged = 0;
+
+	spin_unlock_irqrestore(&udc->lock, flags);
+
+	return 0;
+}
+
+static int nbu2ss_ep_set_wedge(struct usb_ep *_ep)
+{
+	return nbu2ss_ep_set_halt(_ep, 1);
+}
+
+/*-------------------------------------------------------------------------*/
+static int nbu2ss_ep_fifo_status(struct usb_ep *_ep)
+{
+	u32		data;
+	struct nbu2ss_ep	*ep;
+	struct nbu2ss_udc	*udc;
+	unsigned long		flags;
+	PT_FC_REGS		preg;
+
+/*	INFO("=== %s()\n", __func__); */
+
+	if (!_ep) {
+		ERR("%s, bad param\n", __func__);
+		return -EINVAL;
+	}
+
+	ep = container_of(_ep, struct nbu2ss_ep, ep);
+	if (!ep) {
+		ERR("%s, bad ep\n", __func__);
+		return -EINVAL;
+	}
+
+	udc = ep->udc;
+	if (!udc) {
+		ERR("%s, bad udc\n", __func__);
+		return -EINVAL;
+	}
+
+	preg = udc->p_regs;
+
+	data = gpio_get_value(VBUS_VALUE);
+	if (data == 0)
+		return -EINVAL;
+
+	spin_lock_irqsave(&udc->lock, flags);
+
+	if (ep->epnum == 0) {
+		data = _nbu2ss_readl(&preg->EP0_LENGTH) & EP0_LDATA;
+
+	} else {
+		data = _nbu2ss_readl(&preg->EP_REGS[ep->epnum-1].EP_LEN_DCNT)
+			& EPn_LDATA;
+	}
+
+	spin_unlock_irqrestore(&udc->lock, flags);
+
+	return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+static void  nbu2ss_ep_fifo_flush(struct usb_ep *_ep)
+{
+	u32			data;
+	struct nbu2ss_ep	*ep;
+	struct nbu2ss_udc	*udc;
+	unsigned long		flags;
+
+/*	INFO("=== %s()\n", __func__); */
+
+	if (!_ep) {
+		ERR("%s, bad param\n", __func__);
+		return;
+	}
+
+	ep = container_of(_ep, struct nbu2ss_ep, ep);
+	if (!_ep) {
+		ERR("%s, bad ep\n", __func__);
+		return;
+	}
+
+	udc = ep->udc;
+	if (!udc) {
+		ERR("%s, bad udc\n", __func__);
+		return;
+	}
+
+	data = gpio_get_value(VBUS_VALUE);
+	if (data == 0)
+		return;
+
+	spin_lock_irqsave(&udc->lock, flags);
+	_nbu2ss_fifo_flush(udc, ep);
+	spin_unlock_irqrestore(&udc->lock, flags);
+}
+
+/*-------------------------------------------------------------------------*/
+static struct usb_ep_ops nbu2ss_ep_ops = {
+	.enable		= nbu2ss_ep_enable,
+	.disable	= nbu2ss_ep_disable,
+
+	.alloc_request	= nbu2ss_ep_alloc_request,
+	.free_request	= nbu2ss_ep_free_request,
+
+	.queue		= nbu2ss_ep_queue,
+	.dequeue	= nbu2ss_ep_dequeue,
+
+	.set_halt	= nbu2ss_ep_set_halt,
+	.set_wedge	= nbu2ss_ep_set_wedge,
+
+	.fifo_status	= nbu2ss_ep_fifo_status,
+	.fifo_flush	= nbu2ss_ep_fifo_flush,
+};
+
+
+/*-------------------------------------------------------------------------*/
+/* usb_gadget_ops */
+
+/*-------------------------------------------------------------------------*/
+static int nbu2ss_gad_get_frame(struct usb_gadget *pgadget)
+{
+	u32			data;
+	struct nbu2ss_udc	*udc;
+
+/*	INFO("=== %s()\n", __func__); */
+
+	if (pgadget == NULL) {
+		ERR("%s, bad param\n", __func__);
+		return -EINVAL;
+	}
+
+	udc = container_of(pgadget, struct nbu2ss_udc, gadget);
+	if (udc == NULL) {
+		ERR("%s, udc == NULL\n", __func__);
+		return -EINVAL;
+	}
+
+	data = gpio_get_value(VBUS_VALUE);
+	if (data == 0)
+		return -EINVAL;
+
+	data = _nbu2ss_readl(&udc->p_regs->USB_ADDRESS) & FRAME;
+
+	return data;
+}
+
+/*-------------------------------------------------------------------------*/
+static int nbu2ss_gad_wakeup(struct usb_gadget *pgadget)
+{
+	int	i;
+	u32	data;
+
+	struct nbu2ss_udc	*udc;
+
+/*	INFO("=== %s()\n", __func__); */
+
+	if (pgadget == NULL) {
+		ERR("%s, bad param\n", __func__);
+		return -EINVAL;
+	}
+
+	udc = container_of(pgadget, struct nbu2ss_udc, gadget);
+	if (udc == NULL) {
+		ERR("%s, udc == NULL\n", __func__);
+		return -EINVAL;
+	}
+
+	data = gpio_get_value(VBUS_VALUE);
+	if (data == 0) {
+		pr_warning("VBUS LEVEL = %d\n", data);
+		return -EINVAL;
+	}
+
+	_nbu2ss_bitset(&udc->p_regs->EPCTR, PLL_RESUME);
+
+	for (i = 0; i < EPC_PLL_LOCK_COUNT; i++) {
+		data = _nbu2ss_readl(&udc->p_regs->EPCTR);
+
+		if (data & PLL_LOCK)
+			break;
+	}
+
+	_nbu2ss_bitclr(&udc->p_regs->EPCTR, PLL_RESUME);
+
+	return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+static int nbu2ss_gad_set_selfpowered(struct usb_gadget *pgadget,
+					int is_selfpowered)
+{
+	struct nbu2ss_udc	*udc;
+	unsigned long		flags;
+
+/*	INFO("=== %s()\n", __func__); */
+
+	if (pgadget == NULL) {
+		ERR("%s, bad param\n", __func__);
+		return -EINVAL;
+	}
+
+	udc = container_of(pgadget, struct nbu2ss_udc, gadget);
+
+	spin_lock_irqsave(&udc->lock, flags);
+	udc->self_powered = (is_selfpowered != 0);
+	spin_unlock_irqrestore(&udc->lock, flags);
+
+	return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+static int nbu2ss_gad_vbus_session(struct usb_gadget *pgadget, int is_active)
+{
+/*	INFO("=== %s()\n", __func__); */
+	return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+static int nbu2ss_gad_vbus_draw(struct usb_gadget *pgadget, unsigned mA)
+{
+	struct nbu2ss_udc	*udc;
+	unsigned long		flags;
+
+/*	INFO("=== %s()\n", __func__); */
+
+	if (pgadget == NULL) {
+		ERR("%s, bad param\n", __func__);
+		return -EINVAL;
+	}
+
+	udc = container_of(pgadget, struct nbu2ss_udc, gadget);
+
+	spin_lock_irqsave(&udc->lock, flags);
+	udc->mA = mA;
+	spin_unlock_irqrestore(&udc->lock, flags);
+
+	return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+static int nbu2ss_gad_pullup(struct usb_gadget *pgadget, int is_on)
+{
+	struct nbu2ss_udc	*udc;
+	unsigned long		flags;
+
+/*	INFO("=== %s()\n", __func__); */
+
+	if (pgadget == NULL) {
+		ERR("%s, bad param\n", __func__);
+		return -EINVAL;
+	}
+
+	udc = container_of(pgadget, struct nbu2ss_udc, gadget);
+
+	if (udc->driver == NULL) {
+		pr_warning("%s, Not Regist Driver\n", __func__);
+		return -EINVAL;
+	}
+
+	if (udc->vbus_active == 0)
+		return -ESHUTDOWN;
+
+	spin_lock_irqsave(&udc->lock, flags);
+	_nbu2ss_pullup(udc, is_on);
+	spin_unlock_irqrestore(&udc->lock, flags);
+
+	return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+static int nbu2ss_gad_ioctl(
+	struct usb_gadget *pgadget,
+	unsigned code,
+	unsigned long param)
+{
+/*	INFO("=== %s()\n", __func__); */
+	return 0;
+}
+
+
+static const struct usb_gadget_ops nbu2ss_gadget_ops = {
+	.get_frame		= nbu2ss_gad_get_frame,
+	.wakeup			= nbu2ss_gad_wakeup,
+	.set_selfpowered	= nbu2ss_gad_set_selfpowered,
+	.vbus_session		= nbu2ss_gad_vbus_session,
+	.vbus_draw		= nbu2ss_gad_vbus_draw,
+	.pullup			= nbu2ss_gad_pullup,
+	.ioctl			= nbu2ss_gad_ioctl,
+};
+
+static char g_ep0_name[] = "ep0";
+static char g_ep1_name[] = "ep1-bulk";
+static char g_ep2_name[] = "ep2-bulk";
+static char g_ep3_name[] = "ep3in-int";
+static char g_ep4_name[] = "ep4-iso";
+static char g_ep5_name[] = "ep5-iso";
+static char g_ep6_name[] = "ep6-bulk";
+static char g_ep7_name[] = "ep7-bulk";
+static char g_ep8_name[] = "ep8in-int";
+static char g_ep9_name[] = "ep9-iso";
+static char g_epa_name[] = "epa-iso";
+static char g_epb_name[] = "epb-bulk";
+static char g_epc_name[] = "epc-nulk";
+static char g_epd_name[] = "epdin-int";
+
+static char *gp_ep_name[NUM_ENDPOINTS] = {
+	g_ep0_name,
+	g_ep1_name,
+	g_ep2_name,
+	g_ep3_name,
+	g_ep4_name,
+	g_ep5_name,
+	g_ep6_name,
+	g_ep7_name,
+	g_ep8_name,
+	g_ep9_name,
+	g_epa_name,
+	g_epb_name,
+	g_epc_name,
+	g_epd_name,
+};
+
+/*-------------------------------------------------------------------------*/
+static void __init nbu2ss_drv_set_ep_info(
+	struct nbu2ss_udc	*udc,
+	struct nbu2ss_ep	*ep,
+	u8 *name)
+{
+	ep->udc = udc;
+	ep->desc = NULL;
+
+	ep->ep.driver_data = NULL;
+	ep->ep.name = name;
+	ep->ep.ops = &nbu2ss_ep_ops;
+
+	if (isdigit(name[2])) {
+
+		long	num;
+		int	res;
+		char	tempbuf[2];
+
+		tempbuf[0] = name[2];
+		tempbuf[1] = '\0';
+		res = strict_strtol(tempbuf, 16, &num);
+
+		if (num == 0)
+			ep->ep.maxpacket = EP0_PACKETSIZE;
+		else
+			ep->ep.maxpacket = EP_PACKETSIZE;
+
+	} else {
+		ep->ep.maxpacket = EP_PACKETSIZE;
+	}
+
+	list_add_tail(&ep->ep.ep_list, &udc->gadget.ep_list);
+	INIT_LIST_HEAD(&ep->queue);
+}
+
+/*-------------------------------------------------------------------------*/
+static void __init nbu2ss_drv_ep_init(struct nbu2ss_udc *udc)
+{
+	int	i;
+
+	INIT_LIST_HEAD(&udc->gadget.ep_list);
+	udc->gadget.ep0 = &udc->ep[0].ep;
+
+
+	for (i = 0; i < NUM_ENDPOINTS; i++)
+		nbu2ss_drv_set_ep_info(udc, &udc->ep[i], gp_ep_name[i]);
+
+	list_del_init(&udc->ep[0].ep.ep_list);
+}
+
+/*-------------------------------------------------------------------------*/
+/* platform_driver */
+static int __init nbu2ss_drv_contest_init(
+	struct platform_device *pdev,
+	struct nbu2ss_udc *udc)
+{
+	spin_lock_init(&udc->lock);
+	udc->dev = &pdev->dev;
+
+	udc->self_powered = 1;
+	udc->devstate = USB_STATE_NOTATTACHED;
+	udc->pdev = pdev;
+	udc->mA = 0;
+
+	udc->pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
+
+	/* init Endpoint */
+	nbu2ss_drv_ep_init(udc);
+
+	/* init Gadget */
+	udc->gadget.ops = &nbu2ss_gadget_ops;
+	udc->gadget.ep0 = &udc->ep[0].ep;
+	udc->gadget.speed = USB_SPEED_UNKNOWN;
+	udc->gadget.name = driver_name;
+	//udc->gadget.is_dualspeed = 1;
+
+	device_initialize(&udc->gadget.dev);
+
+	dev_set_name(&udc->gadget.dev, "gadget");
+	udc->gadget.dev.parent = &pdev->dev;
+	udc->gadget.dev.dma_mask = pdev->dev.dma_mask;
+
+	return 0;
+}
+
+/*
+ *	probe - binds to the platform device
+ */
+static int nbu2ss_drv_probe(struct platform_device *pdev)
+{
+	int	status = -ENODEV;
+	struct nbu2ss_udc	*udc;
+
+	udc = &udc_controller;
+	memset(udc, 0, sizeof(struct nbu2ss_udc));
+
+	platform_set_drvdata(pdev, udc);
+
+	/* IO Memory Region */
+	if (!request_mem_region(USB_BASE_ADDRESS, USB_BASE_SIZE
+				, driver_name)) {
+
+		ERR("request_mem_region failed\n");
+		return -EBUSY;
+	}
+
+	/* IO Memory */
+	udc->p_regs = (PT_FC_REGS)ioremap(USB_BASE_ADDRESS, USB_BASE_SIZE);
+	if (!udc->p_regs) {
+		ERR("request_io_mem failed\n");
+		goto cleanup3;
+	}
+
+	/* USB Function Controller Interrupt */
+	status = request_irq(USB_UDC_IRQ_1,
+				_nbu2ss_udc_irq,
+				IRQF_DISABLED,
+				driver_name,
+				udc);
+
+	if (status != 0) {
+		ERR("request_irq(USB_UDC_IRQ_1) failed\n");
+		goto cleanup2;
+	}
+
+	/* Driver Initialization */
+	status = nbu2ss_drv_contest_init(pdev, udc);
+	if (status < 0) {
+		/* Error */
+		goto cleanup1;
+	}
+
+	/* VBUS Interrupt */
+	irq_set_irq_type(INT_VBUS, IRQ_TYPE_EDGE_BOTH);
+	status = request_irq(INT_VBUS,
+				_nbu2ss_vbus_irq,
+				IRQF_SHARED,
+				driver_name,
+				udc);
+
+	if (status != 0) {
+		ERR("request_irq(INT_VBUS) failed\n");
+		goto cleanup1;
+	}
+
+	return status;
+
+cleanup1:
+	/* Interrupt Handler - Release */
+	free_irq(USB_UDC_IRQ_1, udc);
+
+cleanup2:
+	/* IO Memory - Release */
+	if (udc->p_regs)
+		iounmap(udc->p_regs);
+
+cleanup3:
+	/* IO Memory Region - Release */
+	release_mem_region(USB_BASE_ADDRESS, USB_BASE_SIZE);
+
+	return status;
+}
+
+/*-------------------------------------------------------------------------*/
+static void nbu2ss_drv_shutdown(struct platform_device *pdev)
+{
+	struct nbu2ss_udc	*udc;
+
+	udc = platform_get_drvdata(pdev);
+	if (udc == NULL)
+		return;
+
+	_nbu2ss_disable_controller(udc);
+}
+
+/*-------------------------------------------------------------------------*/
+static int __exit nbu2ss_drv_remove(struct platform_device *pdev)
+{
+	struct nbu2ss_udc	*udc;
+	struct nbu2ss_ep	*ep;
+	int	i;
+
+	udc = &udc_controller;
+
+	for (i = 0; i < NUM_ENDPOINTS; i++) {
+		ep = &udc->ep[i];
+		if (ep->virt_buf)
+			dma_free_coherent(NULL, PAGE_SIZE,
+				(void *)ep->virt_buf, ep->phys_buf);
+	}
+
+	/* Interrupt Handler - Release */
+	free_irq(USB_UDC_IRQ_1, udc);
+
+	/* Interrupt Handler - Release */
+	free_irq(INT_VBUS, udc);
+
+	/* IO Memory - Release */
+	if (udc->p_regs)
+		iounmap(udc->p_regs);
+
+	/* IO Memory Region - Release */
+	release_mem_region(USB_BASE_ADDRESS, USB_BASE_SIZE);
+
+	return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+static int nbu2ss_drv_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	struct nbu2ss_udc	*udc;
+
+	udc = platform_get_drvdata(pdev);
+	if (udc == NULL)
+		return 0;
+
+	if (udc->vbus_active) {
+		udc->vbus_active = 0;
+		udc->devstate = USB_STATE_NOTATTACHED;
+		udc->linux_suspended = 1;
+
+		if (udc->usb_suspended) {
+			udc->usb_suspended = 0;
+			_nbu2ss_reset_controller(udc);
+		}
+
+		_nbu2ss_quiesce(udc);
+	}
+	_nbu2ss_disable_controller(udc);
+
+	return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+static int nbu2ss_drv_resume(struct platform_device *pdev)
+{
+	u32	data;
+	struct nbu2ss_udc	*udc;
+
+	udc = platform_get_drvdata(pdev);
+	if (udc == NULL)
+		return 0;
+
+	data = gpio_get_value(VBUS_VALUE);
+	if (data) {
+		udc->vbus_active = 1;
+		udc->devstate = USB_STATE_POWERED;
+		_nbu2ss_enable_controller(udc);
+		_nbu2ss_pullup(udc, 1);
+	}
+
+	udc->linux_suspended = 0;
+
+	return 0;
+}
+
+
+static struct platform_driver udc_driver = {
+	.probe		= nbu2ss_drv_probe,
+	.shutdown	= nbu2ss_drv_shutdown,
+	.remove		= __exit_p(nbu2ss_drv_remove),
+	.suspend	= nbu2ss_drv_suspend,
+	.resume		= nbu2ss_drv_resume,
+	.driver		= {
+		.owner	= THIS_MODULE,
+		.name	= driver_name,
+	},
+};
+
+
+
+/*-------------------------------------------------------------------------*/
+/* module */
+
+/*-------------------------------------------------------------------------*/
+static int __init udc_init(void)
+{
+	return platform_driver_register(&udc_driver);
+}
+module_init(udc_init);
+
+/*-------------------------------------------------------------------------*/
+static void __exit udc_exit(void)
+{
+	platform_driver_unregister(&udc_driver);
+}
+module_exit(udc_exit);
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_AUTHOR("Renesas Electronics Corporation");
+MODULE_LICENSE("GPL");
+
+
diff --git a/drivers/staging/emxx_udc/emxx_udc.h b/drivers/staging/emxx_udc/emxx_udc.h
new file mode 100644
index 000000000000..cc5a7d88048d
--- /dev/null
+++ b/drivers/staging/emxx_udc/emxx_udc.h
@@ -0,0 +1,662 @@
+/*
+ *  EMXX FCD (Function Controller Driver) for USB.
+ *
+ *  Copyright (C) 2010 Renesas Electronics Corporation
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2
+ *  as published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software Foundation,
+ *  Inc., 51 Franklin Street, Suite 500, Boston, MA 02110-1335, USA.
+ */
+
+
+
+
+#ifndef _LINUX_EMXX_H
+#define _LINUX_EMXX_H
+
+
+
+/*---------------------------------------------------------------------------*/
+/*----------------- Default undef */
+#if 0
+#define DEBUG
+#define UDC_DEBUG_DUMP
+#endif
+
+/* #define USE_INT_COUNT_OVER */
+
+/*----------------- Default define */
+#define	USE_DMA	1
+#define USE_SUSPEND_WAIT	1
+
+
+
+#ifndef TRUE
+#define TRUE	1
+#define FALSE	0
+#endif
+
+
+/*------------ Board dependence(Resource) */
+#define USB_BASE_ADDRESS	EMXX_USBS1_BASE
+#define USB_BASE_SIZE		0x2000
+
+#define USB_UDC_IRQ_0		INT_USBF0
+#define USB_UDC_IRQ_1		INT_USBF1
+#define	VBUS_VALUE		GPIO_VBUS
+
+/* below hacked up for staging integration */
+#define GPIO_VBUS 0 /* GPIO_P153 on KZM9D */
+#define INT_VBUS 0 /* IRQ for GPIO_P153 */
+#define INT_USBF0 158
+#define INT_USBF1 159
+#define EMXX_USBS0_BASE 0xe2700000
+#define EMXX_USBS1_BASE 0xe2800000
+
+/*------------ Board dependence(Wait) */
+
+/* CHATTERING wait time ms */
+#define VBUS_CHATTERING_MDELAY		1
+/* DMA Abort wait time ms */
+#define DMA_DISABLE_TIME		10
+
+
+
+/*------------ Controller dependence */
+#define NUM_ENDPOINTS		14		/* Endpoint */
+#define REG_EP_NUM		15		/* Endpoint Register */
+#define DMA_MAX_COUNT		256		/* DMA Block */
+
+
+
+#define EPC_RST_DISABLE_TIME		1	/* 1 usec */
+#define EPC_DIRPD_DISABLE_TIME		1	/* 1 msec */
+#define EPC_PLL_LOCK_COUNT		1000	/* 1000 */
+#define IN_DATA_EMPTY_COUNT		1000	/* 1000 */
+
+#define CHATGER_TIME			700	/* 700msec */
+#define USB_SUSPEND_TIME		2000	/* 2 sec */
+
+
+/* U2F FLAG */
+#define U2F_ENABLE		1
+#define U2F_DISABLE		0
+
+
+/*------- BIT */
+#define BIT00		0x00000001
+#define BIT01		0x00000002
+#define BIT02		0x00000004
+#define BIT03		0x00000008
+#define BIT04		0x00000010
+#define BIT05		0x00000020
+#define BIT06		0x00000040
+#define BIT07		0x00000080
+#define BIT08		0x00000100
+#define BIT09		0x00000200
+#define BIT10		0x00000400
+#define BIT11		0x00000800
+#define BIT12		0x00001000
+#define BIT13		0x00002000
+#define BIT14		0x00004000
+#define BIT15		0x00008000
+#define BIT16		0x00010000
+#define BIT17		0x00020000
+#define BIT18		0x00040000
+#define BIT19		0x00080000
+#define BIT20		0x00100000
+#define BIT21		0x00200000
+#define BIT22		0x00400000
+#define BIT23		0x00800000
+#define BIT24		0x01000000
+#define BIT25		0x02000000
+#define BIT26		0x04000000
+#define BIT27		0x08000000
+#define BIT28		0x10000000
+#define BIT29		0x20000000
+#define BIT30		0x40000000
+#define BIT31		0x80000000
+
+#if 0
+/*------- (0x0000) USB Control Register */
+#define USBTESTMODE			(BIT18+BIT17+BIT16)
+#define TEST_J				BIT16
+#define TEST_K				BIT17
+#define TEST_SE0_NAK			(BIT17+BIT16)
+#define TEST_PACKET			BIT18
+#endif
+#define TEST_FORCE_ENABLE		(BIT18+BIT16)
+
+#define INT_SEL				BIT10
+#define CONSTFS				BIT09
+#define SOF_RCV				BIT08
+#define RSUM_IN				BIT07
+#define SUSPEND				BIT06
+#define CONF				BIT05
+#define DEFAULT				BIT04
+#define CONNECTB			BIT03
+#define PUE2				BIT02
+
+#define MAX_TEST_MODE_NUM		0x05
+#define TEST_MODE_SHIFT			16
+
+/*------- (0x0004) USB Status Register */
+#define SPEED_MODE			BIT06
+#define HIGH_SPEED			BIT06
+
+#define CONF				BIT05
+#define DEFAULT				BIT04
+#define USB_RST				BIT03
+#define SPND_OUT			BIT02
+#define RSUM_OUT			BIT01
+
+/*------- (0x0008) USB Address Register */
+#define USB_ADDR			0x007F0000
+#define SOF_STATUS			BIT15
+#define UFRAME				(BIT14+BIT13+BIT12)
+#define FRAME				0x000007FF
+
+#define USB_ADRS_SHIFT			16
+
+/*------- (0x000C) UTMI Characteristic 1 Register */
+#define SQUSET				(BIT07+BIT06+BIT05+BIT04)
+
+#define USB_SQUSET			(BIT06+BIT05+BIT04)
+
+/*------- (0x0010) TEST Control Register */
+#define FORCEHS				BIT02
+#define CS_TESTMODEEN			BIT01
+#define LOOPBACK			BIT00
+
+/*------- (0x0018) Setup Data 0 Register */
+/*------- (0x001C) Setup Data 1 Register */
+
+/*------- (0x0020) USB Interrupt Status Register */
+#define EPn_INT				0x00FFFF00
+#define EP15_INT			BIT23
+#define EP14_INT			BIT22
+#define EP13_INT			BIT21
+#define EP12_INT			BIT20
+#define EP11_INT			BIT19
+#define EP10_INT			BIT18
+#define EP9_INT				BIT17
+#define EP8_INT				BIT16
+#define EP7_INT				BIT15
+#define EP6_INT				BIT14
+#define EP5_INT				BIT13
+#define EP4_INT				BIT12
+#define EP3_INT				BIT11
+#define EP2_INT				BIT10
+#define EP1_INT				BIT09
+#define EP0_INT				BIT08
+#define SPEED_MODE_INT			BIT06
+#define SOF_ERROR_INT			BIT05
+#define SOF_INT				BIT04
+#define USB_RST_INT			BIT03
+#define SPND_INT			BIT02
+#define RSUM_INT			BIT01
+
+#define USB_INT_STA_RW			0x7E
+
+/*------- (0x0024) USB Interrupt Enable Register */
+#define EP15_0_EN			0x00FFFF00
+#define EP15_EN				BIT23
+#define EP14_EN				BIT22
+#define EP13_EN				BIT21
+#define EP12_EN				BIT20
+#define EP11_EN				BIT19
+#define EP10_EN				BIT18
+#define EP9_EN				BIT17
+#define EP8_EN				BIT16
+#define EP7_EN				BIT15
+#define EP6_EN				BIT14
+#define EP5_EN				BIT13
+#define EP4_EN				BIT12
+#define EP3_EN				BIT11
+#define EP2_EN				BIT10
+#define EP1_EN				BIT09
+#define EP0_EN				BIT08
+#define SPEED_MODE_EN			BIT06
+#define SOF_ERROR_EN			BIT05
+#define SOF_EN				BIT04
+#define USB_RST_EN			BIT03
+#define SPND_EN				BIT02
+#define RSUM_EN				BIT01
+
+#define USB_INT_EN_BIT	\
+	(EP0_EN|SPEED_MODE_EN|USB_RST_EN|SPND_EN|RSUM_EN)
+
+/*------- (0x0028) EP0 Control Register */
+#define EP0_STGSEL			BIT18
+#define EP0_OVERSEL			BIT17
+#define EP0_AUTO			BIT16
+#define EP0_PIDCLR			BIT09
+#define EP0_BCLR			BIT08
+#define EP0_DEND			BIT07
+#define EP0_DW				(BIT06+BIT05)
+#define EP0_DW4				0
+#define EP0_DW3				(BIT06+BIT05)
+#define EP0_DW2				BIT06
+#define EP0_DW1				BIT05
+
+#define EP0_INAK_EN			BIT04
+#define EP0_PERR_NAK_CLR		BIT03
+#define EP0_STL				BIT02
+#define EP0_INAK			BIT01
+#define EP0_ONAK			BIT00
+
+/*------- (0x002C) EP0 Status Register */
+#define EP0_PID				BIT18
+#define EP0_PERR_NAK			BIT17
+#define EP0_PERR_NAK_INT		BIT16
+#define EP0_OUT_NAK_INT			BIT15
+#define EP0_OUT_NULL			BIT14
+#define EP0_OUT_FULL			BIT13
+#define EP0_OUT_EMPTY			BIT12
+#define EP0_IN_NAK_INT			BIT11
+#define EP0_IN_DATA			BIT10
+#define EP0_IN_FULL			BIT09
+#define EP0_IN_EMPTY			BIT08
+#define EP0_OUT_NULL_INT		BIT07
+#define EP0_OUT_OR_INT			BIT06
+#define EP0_OUT_INT			BIT05
+#define EP0_IN_INT			BIT04
+#define EP0_STALL_INT			BIT03
+#define STG_END_INT			BIT02
+#define STG_START_INT			BIT01
+#define SETUP_INT			BIT00
+
+#define EP0_STATUS_RW_BIT	(BIT16|BIT15|BIT11|0xFF)
+
+/*------- (0x0030) EP0 Interrupt Enable Register */
+#define EP0_PERR_NAK_EN			BIT16
+#define EP0_OUT_NAK_EN			BIT15
+
+#define EP0_IN_NAK_EN			BIT11
+
+#define EP0_OUT_NULL_EN			BIT07
+#define EP0_OUT_OR_EN			BIT06
+#define EP0_OUT_EN			BIT05
+#define EP0_IN_EN			BIT04
+#define EP0_STALL_EN			BIT03
+#define STG_END_EN			BIT02
+#define STG_START_EN			BIT01
+#define SETUP_EN			BIT00
+
+#define EP0_INT_EN_BIT	\
+	(EP0_OUT_OR_EN|EP0_OUT_EN|EP0_IN_EN|STG_END_EN|SETUP_EN)
+
+/*------- (0x0034) EP0 Length Register */
+#define EP0_LDATA			0x0000007F
+
+/*------- (0x0038) EP0 Read Register */
+/*------- (0x003C) EP0 Write Register */
+
+/*------- (0x0040:) EPn Control Register */
+#define EPn_EN				BIT31
+#define EPn_BUF_TYPE			BIT30
+#define EPn_BUF_SINGLE			BIT30
+
+#define EPn_DIR0			BIT26
+#define EPn_MODE			(BIT25+BIT24)
+#define EPn_BULK			0
+#define EPn_INTERRUPT			BIT24
+#define EPn_ISO				BIT25
+
+#define EPn_OVERSEL			BIT17
+#define EPn_AUTO			BIT16
+
+#define EPn_IPIDCLR			BIT11
+#define EPn_OPIDCLR			BIT10
+#define EPn_BCLR			BIT09
+#define EPn_CBCLR			BIT08
+#define EPn_DEND			BIT07
+#define EPn_DW				(BIT06+BIT05)
+#define EPn_DW4				0
+#define EPn_DW3				(BIT06+BIT05)
+#define EPn_DW2				BIT06
+#define EPn_DW1				BIT05
+
+#define EPn_OSTL_EN			BIT04
+#define EPn_ISTL			BIT03
+#define EPn_OSTL			BIT02
+
+#define EPn_ONAK			BIT00
+
+/*------- (0x0044:) EPn Status Register	*/
+#define EPn_ISO_PIDERR			BIT29		/* R */
+#define EPn_OPID			BIT28		/* R */
+#define EPn_OUT_NOTKN			BIT27		/* R */
+#define EPn_ISO_OR			BIT26		/* R */
+
+#define EPn_ISO_CRC			BIT24		/* R */
+#define EPn_OUT_END_INT			BIT23		/* RW */
+#define EPn_OUT_OR_INT			BIT22		/* RW */
+#define EPn_OUT_NAK_ERR_INT		BIT21		/* RW */
+#define EPn_OUT_STALL_INT		BIT20		/* RW */
+#define EPn_OUT_INT			BIT19		/* RW */
+#define EPn_OUT_NULL_INT		BIT18		/* RW */
+#define EPn_OUT_FULL			BIT17		/* R */
+#define EPn_OUT_EMPTY			BIT16		/* R */
+
+#define EPn_IPID			BIT10		/* R */
+#define EPn_IN_NOTKN			BIT09		/* R */
+#define EPn_ISO_UR			BIT08		/* R */
+#define EPn_IN_END_INT			BIT07		/* RW */
+
+#define EPn_IN_NAK_ERR_INT		BIT05		/* RW */
+#define EPn_IN_STALL_INT		BIT04		/* RW */
+#define EPn_IN_INT			BIT03		/* RW */
+#define EPn_IN_DATA			BIT02		/* R */
+#define EPn_IN_FULL			BIT01		/* R */
+#define EPn_IN_EMPTY			BIT00		/* R */
+
+#define EPn_INT_EN	\
+	(EPn_OUT_END_INT|EPn_OUT_INT|EPn_IN_END_INT|EPn_IN_INT)
+
+/*------- (0x0048:) EPn Interrupt Enable Register */
+#define EPn_OUT_END_EN			BIT23		/* RW */
+#define EPn_OUT_OR_EN			BIT22		/* RW */
+#define EPn_OUT_NAK_ERR_EN		BIT21		/* RW */
+#define EPn_OUT_STALL_EN		BIT20		/* RW */
+#define EPn_OUT_EN			BIT19		/* RW */
+#define EPn_OUT_NULL_EN			BIT18		/* RW */
+
+#define EPn_IN_END_EN			BIT07		/* RW */
+
+#define EPn_IN_NAK_ERR_EN		BIT05		/* RW */
+#define EPn_IN_STALL_EN			BIT04		/* RW */
+#define EPn_IN_EN			BIT03		/* RW */
+
+/*------- (0x004C:) EPn Interrupt Enable Register */
+#define EPn_STOP_MODE			BIT11
+#define EPn_DEND_SET			BIT10
+#define EPn_BURST_SET			BIT09
+#define EPn_STOP_SET			BIT08
+
+#define EPn_DMA_EN			BIT04
+
+#define EPn_DMAMODE0			BIT00
+
+/*------- (0x0050:) EPn MaxPacket & BaseAddress Register */
+#define EPn_BASEAD			0x1FFF0000
+#define EPn_MPKT			0x000007FF
+
+/*------- (0x0054:) EPn Length & DMA Count Register */
+#define EPn_DMACNT			0x01FF0000
+#define EPn_LDATA			0x000007FF
+
+/*------- (0x0058:) EPn Read Register */
+/*------- (0x005C:) EPn Write Register */
+
+/*------- (0x1000) AHBSCTR Register */
+#define WAIT_MODE			BIT00
+
+/*------- (0x1004) AHBMCTR Register */
+#define ARBITER_CTR			BIT31		/* RW */
+#define MCYCLE_RST			BIT12		/* RW */
+
+#define ENDIAN_CTR			(BIT09+BIT08)	/* RW */
+#define ENDIAN_BYTE_SWAP		BIT09
+#define ENDIAN_HALF_WORD_SWAP		ENDIAN_CTR
+
+#define HBUSREQ_MODE			BIT05		/* RW */
+#define HTRANS_MODE			BIT04		/* RW */
+
+#define WBURST_TYPE			BIT02		/* RW */
+#define BURST_TYPE			(BIT01+BIT00)	/* RW */
+#define BURST_MAX_16			0
+#define BURST_MAX_8			BIT00
+#define BURST_MAX_4			BIT01
+#define BURST_SINGLE			BURST_TYPE
+
+/*------- (0x1008) AHBBINT Register */
+#define DMA_ENDINT			0xFFFE0000	/* RW */
+
+#define AHB_VBUS_INT			BIT13		/* RW */
+
+#define MBUS_ERRINT			BIT06		/* RW */
+
+#define SBUS_ERRINT0			BIT04		/* RW */
+#define ERR_MASTER			0x0000000F	/* R */
+
+/*------- (0x100C) AHBBINTEN Register */
+#define DMA_ENDINTEN			0xFFFE0000	/* RW */
+
+#define VBUS_INTEN			BIT13		/* RW */
+
+#define MBUS_ERRINTEN			BIT06		/* RW */
+
+#define SBUS_ERRINT0EN			BIT04		/* RW */
+
+/*------- (0x1010) EPCTR Register */
+#define DIRPD				BIT12		/* RW */
+
+#define VBUS_LEVEL			BIT08		/* R */
+
+#define PLL_RESUME			BIT05		/* RW */
+#define PLL_LOCK			BIT04		/* R */
+
+#ifdef CONFIG_MACH_EMGR
+#define PLL_RST				BIT02		/* RW */
+#endif
+
+#define EPC_RST				BIT00		/* RW */
+
+/*------- (0x1014) USBF_EPTEST Register */
+#define LINESTATE			(BIT09+BIT08)	/* R */
+#define DM_LEVEL			BIT09		/* R */
+#define DP_LEVEL			BIT08		/* R */
+
+#define PHY_TST				BIT01		/* RW */
+#define PHY_TSTCLK			BIT00		/* RW */
+
+/*------- (0x1020) USBSSVER Register */
+#define AHBB_VER			0x00FF0000	/* R */
+#define EPC_VER				0x0000FF00	/* R */
+#define SS_VER				0x000000FF	/* R */
+
+/*------- (0x1024) USBSSCONF Register */
+#define EP_AVAILABLE			0xFFFF0000	/* R */
+#define DMA_AVAILABLE			0x0000FFFF	/* R */
+
+/*------- (0x1110:) EPnDCR1 Register */
+#define DCR1_EPn_DMACNT			0x00FF0000	/* RW */
+
+#define DCR1_EPn_DIR0			BIT01		/* RW */
+#define DCR1_EPn_REQEN			BIT00		/* RW */
+
+/*------- (0x1114:) EPnDCR2 Register */
+#define DCR2_EPn_LMPKT			0x07FF0000	/* RW */
+
+#define DCR2_EPn_MPKT			0x000007FF	/* RW */
+
+/*------- (0x1118:) EPnTADR Register */
+#define EPn_TADR			0xFFFFFFFF	/* RW */
+
+
+
+/*===========================================================================*/
+/* Struct */
+/*------- T_EP_REGS */
+typedef struct _T_EP_REGS {
+	u32 EP_CONTROL;			/* EP Control */
+	u32 EP_STATUS;			/* EP Status */
+	u32 EP_INT_ENA;			/* EP Interrupt Enable */
+	u32 EP_DMA_CTRL;		/* EP DMA Control */
+	u32 EP_PCKT_ADRS;		/* EP Maxpacket & BaseAddress */
+	u32 EP_LEN_DCNT;		/* EP Length & DMA count */
+	u32 EP_READ;			/* EP Read */
+	u32 EP_WRITE;			/* EP Write */
+} T_EP_REGS, *PT_EP_REGS;
+
+/*------- T_EP_DCR */
+typedef struct _T_EP_DCR {
+	u32 EP_DCR1;			/* EP_DCR1 */
+	u32 EP_DCR2;			/* EP_DCR2 */
+	u32 EP_TADR;			/* EP_TADR */
+	u32 Reserved;			/* Reserved */
+} T_EP_DCR, *PT_EP_DCR;
+
+/*------- Function Registers */
+typedef struct _T_FC_REGS {
+	u32 USB_CONTROL;		/* (0x0000) USB Control */
+	u32 USB_STATUS;			/* (0x0004) USB Status */
+	u32 USB_ADDRESS;		/* (0x0008) USB Address */
+	u32 UTMI_CHARACTER_1;		/* (0x000C) UTMI Setting */
+	u32 TEST_CONTROL;		/* (0x0010) TEST Control */
+	u32 Reserved_14;		/* (0x0014) Reserved */
+	u32 SETUP_DATA0;		/* (0x0018) Setup Data0 */
+	u32 SETUP_DATA1;		/* (0x001C) Setup Data1 */
+	u32 USB_INT_STA;		/* (0x0020) USB Interrupt Status */
+	u32 USB_INT_ENA;		/* (0x0024) USB Interrupt Enable */
+	u32 EP0_CONTROL;		/* (0x0028) EP0 Control */
+	u32 EP0_STATUS;			/* (0x002C) EP0 Status */
+	u32 EP0_INT_ENA;		/* (0x0030) EP0 Interrupt Enable */
+	u32 EP0_LENGTH;			/* (0x0034) EP0 Length */
+	u32 EP0_READ;			/* (0x0038) EP0 Read */
+	u32 EP0_WRITE;			/* (0x003C) EP0 Write */
+
+	T_EP_REGS EP_REGS[REG_EP_NUM];	/* Endpoint Register */
+
+	u8 Reserved220[0x1000-0x220];	/* (0x0220:0x0FFF) Reserved */
+
+	u32 AHBSCTR;			/* (0x1000) AHBSCTR */
+	u32 AHBMCTR;			/* (0x1004) AHBMCTR */
+	u32 AHBBINT;			/* (0x1008) AHBBINT */
+	u32 AHBBINTEN;			/* (0x100C) AHBBINTEN */
+	u32 EPCTR;			/* (0x1010) EPCTR */
+	u32 USBF_EPTEST;		/* (0x1014) USBF_EPTEST */
+
+	u8 Reserved1018[0x20-0x18];	/* (0x1018:0x101F) Reserved */
+
+	u32 USBSSVER;			/* (0x1020) USBSSVER */
+	u32 USBSSCONF;			/* (0x1024) USBSSCONF */
+
+	u8 Reserved1028[0x110-0x28];	/* (0x1028:0x110F) Reserved */
+
+	T_EP_DCR EP_DCR[REG_EP_NUM];	/* */
+
+	u8 Reserved1200[0x1000-0x200];	/* Reserved */
+
+} __attribute__ ((aligned(32))) T_FC_REGS, *PT_FC_REGS;
+
+
+
+
+
+
+
+
+#define EP0_PACKETSIZE			64
+#define EP_PACKETSIZE			1024
+
+/* EPn RAM SIZE */
+#define D_RAM_SIZE_CTRL			64
+
+/* EPn Bulk Endpoint Max Packet Size */
+#define D_FS_RAM_SIZE_BULK		64
+#define D_HS_RAM_SIZE_BULK		512
+
+
+struct nbu2ss_udc;
+
+
+enum ep0_state {
+	EP0_IDLE,
+	EP0_IN_DATA_PHASE,
+	EP0_OUT_DATA_PHASE,
+	EP0_IN_STATUS_PHASE,
+	EP0_OUT_STATUS_PAHSE,
+	EP0_END_XFER,
+	EP0_SUSPEND,
+	EP0_STALL,
+};
+
+struct nbu2ss_req {
+	struct usb_request		req;
+	struct list_head		queue;
+
+	u32			div_len;
+	bool		dma_flag;
+	bool		zero;
+
+	bool		unaligned;
+
+	unsigned			mapped:1;
+};
+
+struct nbu2ss_ep {
+	struct usb_ep			ep;
+	struct list_head		queue;
+
+	struct nbu2ss_udc		*udc;
+
+	const struct usb_endpoint_descriptor *desc;
+
+	u8		epnum;
+	u8		direct;
+	u8		ep_type;
+
+	unsigned		wedged:1;
+	unsigned		halted:1;
+	unsigned		stalled:1;
+
+	u8		*virt_buf;
+	dma_addr_t	phys_buf;
+};
+
+
+struct nbu2ss_udc {
+	struct usb_gadget gadget;
+	struct usb_gadget_driver *driver;
+	struct platform_device *pdev;
+	struct device *dev;
+	spinlock_t lock;
+	struct completion		*pdone;
+
+	enum ep0_state			ep0state;
+	enum usb_device_state	devstate;
+	struct usb_ctrlrequest	ctrl;
+	struct nbu2ss_req		ep0_req;
+	u8		ep0_buf[EP0_PACKETSIZE];
+
+	struct nbu2ss_ep	ep[NUM_ENDPOINTS];
+
+	unsigned		softconnect:1;
+	unsigned		vbus_active:1;
+	unsigned		linux_suspended:1;
+	unsigned		linux_resume:1;
+	unsigned		usb_suspended:1;
+	unsigned		self_powered:1;
+	unsigned		remote_wakeup:1;
+	unsigned		udc_enabled:1;
+
+	unsigned		mA;
+
+	u32		curr_config;	/* Current Configuration Number */
+
+	PT_FC_REGS		p_regs;
+};
+
+/* USB register access structure */
+typedef volatile union {
+	struct {
+		unsigned char	DATA[4];
+	} byte;
+	unsigned int		dw;
+} USB_REG_ACCESS;
+
+/*-------------------------------------------------------------------------*/
+#define ERR(stuff...)		printk(KERN_ERR "udc: " stuff)
+
+#endif  /* _LINUX_EMXX_H */