Snapshot 1.1.10 (2006-06-16 Carl Worth ) =========================================================== This is the fifth in a series of snapshots working toward the 1.2 release of cairo. The primary motivation for this snapshot is to fix a long-standing bug that had long been silent, but as of the 1.1.8 snapshot started causing crashes when run against 16-bit depth X servers, (often Xvnc or Xnest). The fix for this adds a new CAIRO_FORMAT_RGB16_565 to the API. This snapshot also includes a rewrite of cairo's SVG backend to eliminate the dependency on libxml2. With this in place, cairo 1.2 will not depend on any libraries that cairo 1.0 did not. As usual, there are also a few fixes for minor bugs. Snapshot 1.1.8 (2006-06-14 Carl Worth ) ========================================================== This is the fourth in a series of snapshots working toward the 1.2 release of cairo. At this point, all major features of the 1.2 release are in place, leaving just a few bug fixes left. In particular, there well be no additional API changes between this 1.1.8 snapshot and the 1.2 release. The announcement for 1.1.6 mentioned several API changes being considered. Only one of these changes was actually implemented (set_dpi -> fallback_resolution). This change does introduce one source-level incompatibility with respect to previous 1.1.x snapshots, so see below for details. Here is an abbreviated summary of changes since the 1.1.6 snapshot: ** API Change ** ---------------- According to the plan mentioned in the 1.1.6 notes, one source-level incompatible change has been implemented. The following three functions have been removed from cairo's API: cairo_pdf_surface_set_dpi cairo_ps_surface_set_dpi cairo_svg_surface_set_dpi and in their place the following function has been added: cairo_surface_set_fallback_resolution The signature and semantics of the function remains the same, so it is a simple matter of changing the name of the function when calling it. As a transition mechanism, this snapshot will (on many systems) build to include the old symbols so that code previously compiled will still run. However, all source code using the old names must be updated before it will compile. And the upcoming 1.2 release is not anticipated to include the old symbols. Finally, it should be pointed out that the old symbols never existed in the supported API of any stable release of cairo. (In the stable 1.0 releases the PDF, PS, and SVG backends were advertised as experimental and unstable.) And, as always, cairo continues to maintain source and binary compatibility between major releases. So applications compiled against supported backends in a stable release of cairo (1.0.4 say) will continue to compile and run without modification against new major releases (1.2.0 say) without modification. API additions ------------- The following new functions have been added to cairo's API: cairo_surface_get_content cairo_debug_reset_static_data cairo_image_surface_get_data cairo_image_surface_get_format cairo_image_surface_get_stride cairo_win32_font_face_create_for_hfont New, backend-specific pkg-config files -------------------------------------- In addition to the original cairo.pc file, cairo will also now install a pkg-config files for each configured backend, (for example cairo-pdf.pc, cairo-svg.pc, cairo-xlib.pc, cairo-win32.pc, etc.) this also includes optional font backends (such as cairo-ft.pc) and the optional png functionality (cairo-png.pc). These new pkg-config files should be very convenient for allowing cairo-using code to easily check for the existing of optional functionality in cairo without having to write complex rules to grub through cairo header files or the compiled library looking for symbols. Printing backend (PS, PDF, and SVG) ----------------------------------- Improving the quality of the "printing" backends has been a priority of the development between cairo 1.1.6 and cairo 1.1.8. The big improvement here is in the area of text output. Previously, at best, text was output as paths without taking advantage of any font support available in the output file format. Now, at the minimum text paths will be shared by using type3 fonts (for PS and PDF---and similarly, defs for SVG). Also, if possible, type3 and truetype fonts will be embedded in PostScript and PDF output. There are still some known bugs with this, (for example, selecting text in a cairo-generated PDF file with an embedded truetype font does not work). So there will be some more changes in this area before cairo 1.2, but do try test this feature out as it exists so far. Many thanks to Kristian Høgsberg for the truetype and type1 font embedding. win32 backend ------------- Performance improvements by preferring GDI over pixman rendering when possible. Fixes for text rendering. xlib backend ------------ Fix potentially big performance bug by making xlib's create_similar try harder to create a pixmap of a depth matching that of the screen. Bug fixes --------- Among various other fixes, the following bugs listed in bugzilla have been fixed: Bug 2488: Patch to fix pixman samping location bug (#2488). https://bugs.freedesktop.org/show_bug.cgi?id=2488 Bug 4196: undef MIN an MAX before defining to avoid duplicate definition https://bugs.freedesktop.org/show_bug.cgi?id=4196 Bug 4723: configure.in: Fix m4 quoting when examining pkg-config version https://bugs.freedesktop.org/show_bug.cgi?id=4723 Bug 4882: Flag Sun's X server has having buggy_repeat. https://bugs.freedesktop.org/show_bug.cgi?id=4882 Bug 5306: test/pdf2png: Add missing include of stdio.h https://bugs.freedesktop.org/show_bug.cgi?id=5306 Bug 7075: Fix make clean to remove cairo.def https://bugs.freedesktop.org/show_bug.cgi?id=7075 (Many thanks to Behdad Esfahbod for helping us track down and fix many of these.) Snapshot 1.1.6 (2006-05-04 Carl Worth ) ========================================================== This is the third in a series of snapshots working toward the imminent 1.2 release of cairo. For a list of items still needing work on the cairo 1.2 roadmap, please see: http://cairographics.org/ROADMAP As can be seen in that list, there are no longer any API additions left on the roadmap. Instead, there is a feature (PDF type 3 fonts) a performance optimization (X server gradients) and a list of bug fixes. This gives us a fair amount of freedom to cut the 1.2 release at almost any point by deciding to defer remaining bug fixes to subsequent maintenance releases such as 1.2.2 and 1.2.4. Before we will do that, we must first be wiling to commit to all the new API additions. As a heads-up, there are a couple of potential API changes being considered. (Note that these are changes to new API introduced during 1.1 so these will not introduce API incompatibilities compared to the stable 1.0 series). The changes being considered are: cairo_get_group_target: may acquire x and y offset return parameters. May also be eliminated in favor of cairo_get_target assuming its role cairo_pdf_surface_set_dpi: cairo_ps_surface_set_dpi: cairo_svg_surface_set_dpi: These functions may be removed in favor of a new cairo_surface_set_fallback_resolution Additionally there is the possibility of a slight change in the semantics of cairo_set_line_width. We believe the current behavior of the sequence: cairo_set_line_width; ... change CTM ...; cairo_stroke; is buggy. It is currently behaving the same as: ... change CTM ...; cairo_set_line_width; cairo_stroke; We are considering fixing this bug before 1.2 with the hope that nobody is already relying on the buggy behavior described here. Do shout if you suspect you might be in that position. The items included in this snapshot (since the 1.1.4 snapshot) are described below. API additions ------------- The long-awaited group-rendering support is now available with the following function calls: cairo_push_group cairo_push_group_with_content cairo_pop_group cairo_pop_group_to_source cairo_get_group_target This API provides a much more convenient mechanism for doing rendering to an intermediate surface without the need to manually create a temporary cairo_surface_t and a temporary cairo_t and clean them up afterwards. Add the following missing get function to complement cairo_surface_set_device_offset: cairo_surface_get_device_offset PDF backend (API addition) -------------------------- The PDF backend now provides for per-page size changes, (similar to what the PostScript backend got in the 1.1.4 snapshot). The new API is: cairo_pdf_surface_set_size Xlib backend (API additions) ---------------------------- The following functions have been added to allow the extraction of Xlib surface: cairo_xlib_surface_get_display cairo_xlib_surface_get_drawable cairo_xlib_surface_get_screen cairo_xlib_surface_get_visual cairo_xlib_surface_get_depth XCB backend (experimental) -------------------------- Update backend so that it now compiles with the recent XCB 0.9 release. Bug fixes and memory leak cleanup --------------------------------- Various little things, nothing too significant though. Snapshot 1.1.4 (2006-05-03 Carl Worth ) ========================================================== This is the second in a series of snapshots working toward the upcoming 1.2 release of cairo. For a list of items still needing work on the cairo 1.2 roadmap, please see: http://cairographics.org/ROADMAP The items included in this snapshot (since the 1.1.2 snapshot) are described below. PostScript backend: new printing-oriented API --------------------------------------------- We anticipate that with cairo 1.2, toolkits will begin to use cairo for printing on systems that use PostScript as the spool format. To support this use case, we have added 4 new function calls that are specific to the PostScript backend: cairo_ps_surface_set_size cairo_ps_surface_dsc_comment cairo_ps_surface_dsc_begin_setup cairo_ps_surface_dsc_begin_page_setup These functions allow variation of the page size/orientation from one page to the next in the PostScript output. They also allow the toolkit to provide per-document and per-page printer control options in a device-independent way, (for example, by using PPD options and emitting them as DSC comments into the PostScript output). This should allow toolkits to provide very fine-grained control of many options available in printers, (media size, media type, tray selection, etc.). SVG backend: builds by default, version control ----------------------------------------------- The SVG backend continues to see major improvements. It is expected that the SVG backend will be a supported backend in the 1.2 release. This backend will now be built by default if its dependencies (freetype and libxml2) are met. Additionally, the SVG backend now has flexibility with regard to what version of SVG it targets. It will target SVG 1.1 by default, which will require image fallbacks for some of the "fancier" cairo compositing operators. Or with the following new function calls: cairo_svg_surface_restrict_to_version cairo_svg_get_versions cairo_svg_version_to_string it can be made to target SVG 1.2 in which there is native support for these compositing operators. Bug fixes --------- At least the following bugs have been fixed since the 1.1.2 snapshot: crash at XRenderAddGlyphs https://bugs.freedesktop.org/show_bug.cgi?id=4705 Can't build cairo-1.1.2 on opensolaris due to " void function cannot return value" https://bugs.freedesktop.org/show_bug.cgi?id=6792 Missing out-of-memory check at gfx/cairo/cairo/src/cairo-atsui-font.c:185 https://bugzilla.mozilla.org/show_bug.cgi?id=336129 A couple of memory leaks. Snapshot 1.1.2 (2006-04-25 Carl Worth ) ========================================================== This is the first in a series of snapshots working toward the upcoming 1.2 release of cairo. (Subsequent snapshot will use successive even numbers for the third digit, 1.1.4, 1.1.6, etc.) This snapshot is backwards-compatible with the 1.0 series---it makes a few API additions but does not remove any API. PostScript and PDF backends are no longer "experimental" -------------------------------------------------------- The major theme of the 1.2 release is improved PostScript and PDF backends for cairo. Unlike the 1.0 series, in the 1.2 series these backends will not be marked as experimental and will be enabled by default. We encourage people to test this snapshot and the PS/PDF backends in particular as much as possible. The PostScript and PDF output is not yet ideal. * One major problem with the PostScript output is that image fallbacks are used more often than strictly necessary, and the image fallbacks are at a lower resolution than desired, (the cairo_ps_surface_set_dpi call is ignored). * The major drawback of the current PDF backend implementation is its text support. Every glyph is represented by a filled path in the PDF file. The causes file sizes to be much larger and rendering to be much slower than desired. It is anticipated that both of these shortcomings will see some improvements before the final 1.2 release. In spite of those shortcomings, we hope that the PS and PDF backends will yield faithful results for pretty much any cairo operations you can throw at them. Please let us know if you are getting obviously "different" results from the PS/PDF backends than from the image or xlib backends. Other new experimental backends ------------------------------- This snapshot includes three new backends that did not exist in the 1.0 series: * beos backend * directfb backend * svg backend These are all currently marked "experimental" and are disabled by default. But the SVG backend in particular has seen a lot of recent development and is very close to passing the entire cairo test suite. It is possible that this backend will become a fully supported backend by the time of the cairo 1.2 release. Public API additions -------------------- There have been a few new API functions added to cairo, including: New get_type functions for querying sub-types of object: cairo_surface_get_type cairo_pattern_get_type cairo_font_face_get_type cairo_scaled_font_get_type More convenience in working with cairo_scaled_font_t with new getter functions: cairo_scaled_font_get_font_face cairo_scaled_font_get_font_matrix cairo_scaled_font_get_ctm cairo_scaled_font_get_font_options As well as a convenience function for setting a scaled font into a cairo context: cairo_set_scaled_font and a function to allow text extents to be queried directly from a scaled font, (without requiring a cairo_surface_t or a cairo_t): cairo_scaled_font_text_extents These new scaled font functions were motivated by the needs of the pango library. Finally, a new path-construction function was added which clears the current point in preparation for a new sub path. This makes cairo_arc easier to use in some situations: cairo_new_sub_path Before the 1.2 release is final we do still plan a few more API additions specifically motivated by the needs of Mozilla/Firefox. Optimizations and bug fixes --------------------------- Shortly after the 1.0 maintenance series branched off the mainline there was a major rework of the cairo font internals. This should provide some good performance benefits, but it's also another area people should look at closely for potential regressions. There has not yet been any widespread, systematic optimization of cairo, but various performance improvements have been made, (and some of them are fairly significant). So if some things seem faster than 1.0 then things are good. If there are any performance regressions compared to 1.0 then there is a real problem and we would like to hear about that. There has been a huge number of bug fixes---too many to mention in detail. Again, things should be better, and never worse compared to 1.0. Please let us know if your testing shows otherwise. Release 1.0.2 (2005-10-03 Carl Worth ) ========================================================= For each bug number XXXX below, see: https://bugs.freedesktop.org/show_bug.cgi?id=XXXX for more details. General bug fixes ----------------- * 4408 - Add support for dashing of stroked curves (Carl Worth) * 4409 - Fix dashing so that each dash is capped on both ends (Carl Worth) * 4414 - Prevent SIGILL failures (proper use of -mmmx and -msse flags) (Sebastien Bacher, Billy Biggs) * 4299 - Fix crashes with text display in multi-threaded program (Alexey Shabalin, Carl Worth) * 4401 - Do not use sincos function since it is buggy on some platforms) (Tim Mooney, Carl Worth) * 4245 - Fix several bugs in the test suite exposed by amd64 systems (Seemant Kulleen, Carl Worth) * 4321 - Add missing byteswapping on GetImage/PutImage (Sjoerd Simons, Owen Taylor) * 4220 - Make the check for rectangular trapezoids simpler and more accurate (Richard Stellingwerff, Owen Taylor) * 4260 - Add missing channel-order swapping for antialised fonts (Barbie LeVile, Owen Taylor) * 4283 - Fix compilation failure with aggressive inlining (gcc -O3) (Marco Manfredini, Owen Taylor) * 4208 - Fix some warnings from sparse (Kjartan Maraas, Billy Biggs) * 4269 - Fix to not crash when compiled with -fomit-frame-pointer (Ronald Wahl, Owen Taylor) * 4263 - Improve performance for vertical gradients (Richard Stellingwerff, Owen Taylor) * 4231 * 4298 - Accomodate gentoo and Mandriva versions in X server vendor string check (Billy Biggs, Frederic Crozat, Owen Taylor) win32-specific fixes -------------------- * 4599 - Fix "missing wedges" on some stroked paths (win32) (Tim Rowley, Jonathan Watt, Bertram Felgenhauer, Carl Worth, Keith Packard) * 4612 - Fix disappearing text if first character out of surface (win32) (Tim Rowley) * 4602 - Fix shutdown of cairo from failing intermediate, size-0 bitmaps (win32) Aka. the "white rectangles" bug from mozilla-svg testing (Tim Rowley) * Various portability improvements for win32 (Hans Breuer, Owen Taylor, Carl Worth) * 4593 - Fix font sizes to match user expectations (win32) (Tor Lillqvist, Owen Taylor) * 3927 - Fix to report metrics of size 0 for glyph-not-available (win32) (Hans Breuer, Owen Taylor, Tor Lillqvist) * Add locking primitives for win32 (Hans Breuer) xlib-specific fixes ------------------- * Fix crash from size-0 pixmap due to empty clip region (xlib) (Radek Doulík, Carl Worth) Release 1.0.0 (2005-08-24 Carl Worth ) ========================================================= Experimental backends --------------------- * The Glitz, PS, PDF, Quartz, and XCB backends have been declared experimental, and are not part of the API guarantees that accompany this release. They are not built by default, even when the required libraries are available, and must be enabled explicitly with --enable-ps, --enable-pdf, --enable-quartz or --enable-xcb. It is very painful for us to be pushing out a major release without these backends enabled. There has been a tremendous amount of work put into each one and all are quite functional to some extent. However, each also has some limitations. And none of these backends have been tested to the level of completeness and correctness that we expect from cairo backends. We do encourage people to experiment with these backends and report success, failure, or means of improving them. Operator behavior ----------------- * Prior to 0.9.0 the SOURCE, CLEAR and a number of other operators behaved in an inconsistent and buggy fashion and could affect areas outside the clip mask. In 0.9.0, these six "unbounded" operators were fixed to consistently clear areas outside the shape but within the clip mask. This is useful behavior for an operator such as IN, but not what was expected for SOURCE and CLEAR. So, in this release the behavior of SOURCE and CLEAR has been changed again. They now affect areas only within both the source and shape. We can write the new operators as: SOURCE: dest' = (mask IN clip) ? source : dest CLEAR: dest' = (mask IN clip) ? 0 : dest Behavior and API changes ------------------------ * Setting the filter on a gradient pattern would change the interpolation between color stops away from the normal linear interpolation. This dubious behavior has been removed. * The CAIRO_CONTENT_VALID() and CAIRO_FORMAT_VALID() macros -- implementation details that leaked into cairo.h -- have been moved into an internal header. * The cairo_show_text function now advances the current point according to the total advance values of the string. API additions ------------- * cairo_set_dash can now detect error and can set CAIRO_STATUS_INVALID_DASH. Features -------- * When compiled against recent versions of fontconfig and FreeType, artificial bold fonts can now be turned on from fonts.conf using the FC_EMBOLDEN fontconfig key. Optimization ------------ * The compositing code from the 'xserver' code tree has now been completely merged into libpixman. This includes MMX optimization of common operations. * The image transformation code in libpixman has been improved and now performs significantly faster. Bug fixes --------- * Several crashes related to corruption in the font caches have been fixed. * All test cases now match pixel-for-pixel on x86 and PPC; this required fixing bugs in the compositing, stroking, and pattern rendering code. * Negative dash offsets have been fixed to work correctly. * The stroking of paths with mutiple subpaths has now been fixed to apply caps to all subpaths rather than just the last one. * Many build fixes for better portability on various systems. * Lots of other bug fixes, but we're too tired to describe them in more detail here. Release 0.9.2 (2005-08-13 Carl Worth ) ========================================================= Release numbering ----------------- * You will notice that this release jumped from 0.9.0 to 0.9.2. We've decided to use an odd micro version number (eg. 0.9.1) to indicate in-progress development between releases. As soon as 0.9.2 is tagged, the version will be incremented in CVS to 0.9.3 where it will stay until just before 0.9.4 is built, uploaded, and tagged. So, even-micro == a released version, odd-micro == something in-between. Libpixman dependency dropped ---------------------------- * As of this release, the dependency on an external libpixman has been dropped. Instead, the code from libpixman needed for cairo has been incorporated into the cairo source tree. The motivation for this change is that while cairo's API is stable and ready to be maintained after the 1.0 release, libpixman's API is not, so we do not want to expose it at this time. Also, the incorporation of libpixman into cairo also renames all previously-public libpixman symbols in order to avoid any conflict with a future release of libpixman API additions ------------- * Macros and functions have been added so that the version of cairo can be queried at either compile-time or at run-time. The version is made available as both a human-readable string and as a single integer: CAIRO_VERSION_STRING eg. "0.9.2" CAIRO_VERSION eg. 000902 const char* cairo_version_string (void); /* eg. "0.9.2" */ int cairo_version (void); /* eg. 000902 */ A macro is provided to convert a three-part component version into the encoded single-integer form: CAIRO_VERSION_ENCODE(X,Y,Z) For example, the CAIRO_VERSION value of 000902 is obtained as CAIRO_VERSION_ENCODE(0,9,2). The intent is to make version comparisons easy, either at compile-time: #if CAIRO_VERSION >= CAIRO_VERSION_ENCODE(0,9,2) ... #endif Or at run-time: if (cairo_version() >= CAIRO_VERSION_ENCODE(0,9,2)) { /* ... */ } Thread safety ------------- * This release adds pthread-based locking (when available) to make the caches used by cairo safe for threaded programs. Some may remember a failed experiment with this locking between the 0.5.1 and 0.5.2 snapshots, (where even single-threaded programs that linked with -lpthread would deadlock). We believe that that problem has been fixed, so we are looking forward to testing and reports from users with threaded applications. Bug fixes --------- * The XCB and Quartz backends failed to compiled in the 0.9.0 release due to minor syntax errors. These have now been fixed. * Various crashes in glitz and pixman due to size 0 glyphs have been fixed. Release 0.9.0 (2005-08-08 Carl Worth ) ========================================================= Soname change ------------- * In all prior snapshots, the libtool library versioning was set to 1:0:0. As this release is intended to mark the beginning of backwards-compatible releases, the versioning has been incremented to 2:0:0. You will notice that the numeric extension on the installed library filename will change similarly. This change will also require all cairo-using applications to be recompiled. We recognize that this may cause some frustration since this release is backwards-compatible with 0.6.0 and in that sense "shouldn't" require re-compilation. However, since all historical snapshots have used the same 1:0:0 version in spite of incompatible API changes between them, it was essential that the upcoming 1.0 release series have distinct library versioning. All future releases will use the library versioning to properly indicate compatibility between releases. So, any application re-compiled now to work with the 0.9.0 will not need to be recompiled when a compatible 1.0 release of cairo is made in the future. API additions ------------- * Add new function calls to set/get the current antialiasing mode in the graphics state: cairo_set_antialias cairo_get_antialias This call accepts the same modes recently added for font options (NONE or GRAY) but affects the rendering of geometry other than text. The intent of this call is to enable more precise control of which pixels are affected by each operation, for example to allow for full-scene antialiasing for seam-free rendering. It is not expected that non-antialiased rendering will perform better than anti-aliased rendering. * Three new functions were added to provide support for mixed cairo- and non-cairo drawing to the same surface: cairo_surface_mark_dirty cairo_surface_mark_dirty_rectangle cairo_surface_flush * The return type of the several "reference" functions was change, (API compatibly), from void to the same type as the argument. The affected functions are: cairo_font_face_reference cairo_scaled_font_reference cairo_pattern_reference cairo_surface_reference cairo_reference This allows a convenient way to assign and reference in a single statement. Semantic changes ---------------- * The behavior of cairo_set_source with a pattern with a non-identity matrix was previously not well-defined. The new behavior is as follows: The pattern's transformation matrix will be locked to the user space in effect at the time of cairo_set_source(). This means that further modifications of the CTM will not affect the source pattern. cairo-win32 ----------- * Some portability improvements, (eg. workaround for missing stdint.h). cairo-ft -------- * Updated to allow compilation with older versions of freetype. Bug fixes --------- * Fix the unbounded operators to actually produce a correct result, (previously the results were artificially restricted to the bounding box of whatever shape was being drawn rather than extending out infinitely). The fixed operators are: CAIRO_OPERATOR_CLEAR CAIRO_OPERATOR_SOURCE CAIRO_OPERATOR_OUT CAIRO_OPERATOR_IN CAIRO_OPERATOR_DEST_IN CAIRO_OPERATOR_DEST_ATOP * Fix cairo_mask and cairo_mask_surface to transform the mask by the current transformation matrix (CTM). * Fix cairo_set_source to lock the CTM used to transform the pattern. * Workaround for X server Render bug involving repeating patterns with a general transformation matrix. * cairo_get_font_face fixed to return a "nil" font face object rather than NULL on error. * cairo_set_font_face fixed to not crash if given a NULL font face, (which is the documented interface for restoring the default font face). * Fix xlib glyphset caching to not try to free a NULL glyph. Snapshot 0.6.0 (2005-07-28 Carl Worth ) ========================================================== API changes ----------- * The prototypes of the following functions have changed: cairo_xlib_surface_create_with_xrender_format cairo_xlib_surface_create_for_bitmap A Screen* parameter has been added to each. This allows the cairo xlib backend to work correctly with multi-head X servers. * The following function has been modified: cairo_scaled_font_create to accept a cairo_font_options_t*. See below fore more details. * All opaque, reference-counted cairo objects have now been moved to a standard error-handling scheme. The new objects to receive this treatment are cairo_font_face_t, cairo_scaled_font_t, and cairo_surface_t. (Previous snapshots already provided this scheme for cairo_t, cairo_path_t, and cairo_pattern_t.) This changes two functions to have a return type of void rather than cairo_status_t: cairo_scaled_font_extent cairo_surface_finish And significantly, none of the create functions for any of the objects listed above will return NULL. The pointer returned from any function will now always be a valid pointer and should always be passed to the corresponding destroy function when finished The simplest strategy for porting code is to switch from: object = cairo__create (); if (object == NULL) goto BAILOUT; /* act on object */ cairo__destroy (object); to: object = cairo__create (); if (cairo__status (object)) goto BAILOUT; /* act on object */ cairo__destroy (object); But significantly, it is not required to check for an error status before the "act on object" portions of the code above. All operations on an object with an error status are, by definition, no-ops without side effect. So new code might be written in an easier-to-read style of: object = cairo__create (); /* act on object */ cairo__destroy (object); with cairo__status checks placed only at strategic locations. For example, passing an error object to another object, (eg. cairo_set_source with an in-error pattern), will propagate the error to the subsequent object (eg. the cairo_t). This means that error checking can often be deferred even beyond the destruction of a temporary object. API additions ------------- * New functions for checking the status of objects that have been switched to the common error-handling scheme: cairo_font_face_status cairo_scaled_font_status cairo_surface_status * The _cairo_error function which was added in 0.5.1 has now been made much more useful. In 0.5.1 only errors on cairo_t objects passed through _cairo_error. Now, an error on any object should pass through _cairo_error making it much more reliable as a debugging mechanism for finding when an error first occurs. * Added new font options support with a myriad of functions: cairo_font_options_create cairo_font_options_copy cairo_font_options_destroy cairo_font_options_status cairo_font_options_merge cairo_font_options_equal cairo_font_options_hash cairo_font_options_set_antialias cairo_font_options_get_antialias cairo_font_options_set_subpixel_order cairo_font_options_get_subpixel_order cairo_font_options_set_hint_style cairo_font_options_get_hint_style cairo_font_options_set_hint_metrics cairo_font_options_get_hint_metrics cairo_surface_get_font_options cairo_ft_font_options_substitute cairo_set_font_options cairo_get_font_options This new font options support allows the application to have much more fine-grained control over how fonts are rendered. Significantly, it also allows surface backends to have some influence over the process. For example, the xlib backend now queries existing Xft properties to set font option defaults. * New function: cairo_xlib_surface_set_drawable which allows the target drawable for an xlib cairo_surface_t to be changed to another with the same format, screen, and display. This is necessary in certain double-buffering techniques. New features ------------ * Sub-pixel text antialiasing is now supported. Bug fixes --------- * Fixed assertion failure in cairo_surface_create_similar when application commits an error by passing a cairo_format_t rather than a cairo_content_t. * Avoid division by zero in various places (cairo-ft). * Fix infinite loop when using non-default visuals (cairo-xlib). * Eliminate segfault in cairo_image_surface_create_from_png_stream. * Prevent errant sign-extension of masks on 64-bit architectures (cairo-xlib and cairo-xcb). * Other miscellaneous fixes. Snapshot 0.5.2 (2005-07-18 Carl Worth ) ========================================================== API changes ----------- * New functions for creating patterns of a single color: cairo_pattern_create_rgb cairo_pattern_create_rgba * Change cairo_surface_create_similar to accept a new type of cairo_content_t rather than cairo_format_t: typedef enum _cairo_content { CAIRO_CONTENT_COLOR = 0x1000, CAIRO_CONTENT_ALPHA = 0x2000, CAIRO_CONTENT_COLOR_ALPHA = 0x3000 } cairo_content_t; * Add new CAIRO_FORMAT_VALID and CAIRO_CONTENT_VALID macros. * Remove unused status value: CAIRO_STATUS_NO_TARGET_SURFACE * Add new status values: CAIRO_STATUS_INVALID_STATUS * Require libpixman >= 0.1.5 (for necessary bug fixes) Bug fixes --------- * Fix cairo_surface_write_to_png for RGB24 images. * Fix broken metrics and rendering for bitmap fonts. Add mostly useless bitmap glyph transformation. * Fix glyph caches to not eject entries that might be immediately needed, (fixing intermittent crashes when rendering text). * Fix all memory leaks found by running "make check-valgrind". ATSUI backend changes --------------------- * Allow building against < 10.3 SDK. * Prevent crash on empty strings. Glitz backend changes --------------------- * Require glitz >= 0.4.4. * Use frame buffer objects instead of pbuffers for accelerated offscreen drawing. * Minor improvement to gradient pattern creation. PostScript backend fixes ------------------------ * Rewrite of the PS backend to generate more interesting output that the old big-image implementation. Win32 backend fixes ------------------- * Implement glyph path support. * Fix swap of blue and green values in the fill_rectangles path. Xlib backend fixes ------------------ * Add optimization to use XCopyArea rather than XRenderComposite when transforming only with an integer translation, and using SOURCE operator or OVER with a source pattern without alpha. Snapshot 0.5.1 (2005-06-20 Carl Worth ) ========================================================== API changes ----------- * Removed cairo_status_string(cairo_t*) and add cairo_status_to_string(cairo_status_t) in its place. Code using cairo_status_string can be ported forward as follows: cairo_status (cr); -> cairo_status_to_string (cairo_status (cr)); * Removed the BAD_NESTING restriction which means that two different cairo_t objects can now interleave drawing to the same cairo_surface_t without causing an error. * The following functions which previously had a return type of cairo_status_t now have a return type of void: cairo_pattern_add_color_stop_rgba cairo_pattern_set_matrix cairo_pattern_get_matrix cairo_pattern_set_extend cairo_pattern_set_filter See discussion of cairo_pattern_status below for more details. API additions ------------- * Improved error handling: cairo_status_t cairo_pattern_status (cairo_pattern_t *pattern); This snapshot expands the status-based error handling scheme from cairo_t to cairo_path_t and cairo_pattern_t. It also expands the scheme so that object-creating functions, (cairo_create, cairo_pattern_create_*, cairo_copy_path_*), are now guaranteed to not return NULL. Instead, in the case of out-of-memory these functions will return a static object with status==CAIRO_STATUS_NO_MEMORY. The status can be checked with the functions cairo_status and cairo_pattern_status, or by direct inspection of the new status field in cairo_path_t. Please note that some objects, including cairo_surface_t and all of the font-related objects have not been converted to this error-handling scheme. * In addition to the above changes, a new private function has been added: _cairo_error This function can be used to set a breakpoint in a debugger to make it easier to find programming error in cairo-using code. (Currently, _cairo_error is called when any error is detected within a cairo_t context, but is not called for non-cairo_t errors such as for cairo_path_t and cairo_pattern_t). * Fixed cairo_path_data_t so that its enum is visible to C++ code, (as cairo_path_data_type_t). Performance improvements ------------------------ * Made a minor performance improvement for clipping, (restrict clip surface to the new intersected bounds). * Optimize rendering of a solid source pattern with a pixel-aligned rectangular path to use backend clipping rather than rasterization and backend compositing. * Optimize cairo_paint_with_alpha to defer to cairo_paint when alpha is 1.0. Bug fixes --------- * Fixed memory leak in cairo_copy_path. * A build fix for non-srcdir builds. PDF backend fixes ----------------- * New support for path-based clipping. * Fix for text rotated to angles other than multiples of π/2. Win32 backend fixes ------------------- * Fix for text extents. Xlib backend ------------ * Implemented a complex workaround for X server bug[*] related to Render-based compositing with untransformed, repeating source pictures. The workaround uses core Xlib when possible for performance, (ie. with CAIRO_OPERATOR_SOURCE or CAIRO_OPERATOR_OVER with an opaque source surface), and falls back to the pixman image-based compositing otherwise. [*] https://bugs.freedesktop.org/show_bug.cgi?id=3566 * Various bug fixes, particularly in the fallback paths. Snapshot 0.5.0 (2005-05-17 Carl Worth ) ========================================================== This is a pretty big, and fairly significant snapshot. It represents between 2 and 3 months of solid work from a lot of people on improving the API as much as possible. I'd like to express my appreciation and congratulations to everyone who has worked on the big API Shakeup, (whether in email battles over names, or fixing my silly bugs). This snapshot will require some effort on the part of users, since there are a _lot_ of API changes (ie. no cairo program ever written is safe --- they're all broken now in at least one way). But, in spite of that, we do encourage everyone to move their code to this snapshot as soon as possible. And we're doing everything we can think of to make the transition as smooth as possible. The idea behind 0.5 is that we've tried to make every good API change we could want now, and get them all done with. That is, between now and the 1.0 release of cairo, we expect very few new API changes, (though some will certainly sneak in). We will have some significant additions, but the pain of moving code from cairo 0.4 to cairo 0.5 should be a one time experience, and things should be much smoother as we continue to move toward cairo 1.0. And with so many changes coming out for the first time in this 0.5 release, we really do need a lot of people trying this out to make sure the ideas are solid before we freeze the API in preparation for the 1.0 release. OK, enough introduction. Here is a (not-quite-complete) description of the API removals, changes and additions in this snapshot, (compared to 0.4.0) API removals ============ The following public functions have been removed: - cairo_set_target_* This is a big change. See the description of cairo_create in the API changes section for how to deal with this. - cairo_set_alpha Alpha blending hasn't gone away; there's just a much more unified rendering model now. Almost all uses of cairo_set_alpha will be trivially replaced with cairo_set_source_rgba and a few others will be replaced just as easily with cairo_paint_with_alpha. - cairo_show_surface Another useful function that we realized was muddling up the rendering model. The replacement is quite easy: cairo_set_source_surface and cairo_paint. - cairo_matrix_create - cairo_matrix_destroy - cairo_matrix_copy - cairo_matrix_get_affine These functions supported an opaque cairo_matrix_t. We now have an exposed cairo_matrix_t structure, so these can be dropped. - cairo_surface_set_repeat - cairo_surface_set_matrix - cairo_surface_set_filter These properties don't belong on surfaces. If you were using them, you'll just want to instead use cairo_pattern_create_for_surface and then set these properties on the pattern. - cairo_copy This was a confusing function and hopefully nobody will miss it. But if you really don't find cairo_save/restore adequate, let us know and we have another idea for a potential replacement. And while we're on the subject of removals, we carefully tightened up the cairo header files so they no longer gratuitously include header files that are not strictly necessary, (stdio.h, stdint.h, pixman.h, Xrender.h, etc. and their dependencies). This may lead to some surprising errors, so keep your eyes open for that. API changes =========== Here are some of the API changes that have occurred: ~ cairo_create(void) -> cairo_create(cairo_surface_t *) This is the big change that breaks every program. The ability to re-target a cairo_t was not particularly useful, but it did introduce a lot of muddy semantic questions. To eliminate that, cairo_create now requires its target surface to be passed in at creation time. This isn't too hard to cope with as the typical first operation after cairo_create was often cairo_set_target_foo. So the order of those two swap and the application instead has cairo_foo_surface_create, then cairo_create. ~ cairo_current_* -> cairo_get_* We had a strange mixture of cairo_get and cairo_current functions. They've all been standardized on cairo_get, (though note one is cairo_get_current_point). ~ CAIRO_OPERATOR_SRC -> CAIRO_OPERATOR_SOURCE ~ CAIRO_OPERATOR_OVER_REVERSE -> CAIRO_OPERATOR_DEST_OVER Many of the cairo_operator_t symbolic values were renamed to reduce the amount of abbreviation. The confusing "OP_REVERSE" naming was also changed to use "DEST_OP" instead which is easier to read and has wider acceptance in other libraries/languages. ~ cairo_set_pattern -> cairo_set_source ~ cairo_set_rgb_color -> cairo_set_source_rgb All of the various functions that changed the source color/pattern were unified to use cairo_set_source names to make the relation more clear. ~ cairo_transform_point -> cairo_user_to_device ~ cairo_transform_distance -> cairo_user_to_device_distance ~ cairo_inverse_transform_point -> cairo_device_to_user ~ cairo_inverse_transform_distance -> cairo_device_to_user_distance These names just seemed a lot more clear. ~ cairo_init_clip -> cairo_reset_clip ~ cairo_concat_matrix -> cairo_transform More abbreviation elimination ~ cairo_current_path -> cairo_copy_path ~ cairo_current_path_flat -> cairo_copy_path_flat The former mechanism for examining the current path was a function that required 3 or 4 callbacks. This was more complexity than warranted in most situations. The new cairo_copy_path function copies the current path into an exposed data structure, and the documentation provides a convenient idiom for navigating the path data. API additions ------------- + cairo_paint A generalized version of the painting operators cairo_stroke and cairo_fill. The cairo_paint call applies the source paint everywhere within the current clip region. Very useful for clearing a surface to a solid color, or painting an image, (see cairo_set_source_surface). + cairo_paint_with_alpha Like cairo_paint but applying some alpha to the source, (making the source paint translucent, eg. to blend an image on top of another). + cairo_mask A more generalized version of cairo_paint_with_alpha which allows a pattern to specify the amount of translucence at each point rather than using a constant value everywhere. + cairo_mask_surface A convenience function on cairo_mask for when the mask pattern is already contained within a surface. + cairo_surface_set_user_data + cairo_surface_get_user_data + cairo_font_face_set_user_data + cairo_font_face_get_user_data Associate arbitrary data with a surface or font face for later retrieval. Get notified when a surface or font face object is destroyed. + cairo_surface_finish Allows the user to instruct cairo to finish all of its operations for a given surface. This provides a safe point for doing things such as flushing and closing files that the surface may have had open for writing. + cairo_fill_preserve + cairo_stroke_preserve + cairo_clip_preserve One interesting change in cairo is that the path is no longer part of the graphics state managed by cairo_save/restore. This allows functions to construct paths without interfering with the graphics state. But it prevents the traditional idiom for fill-and-stroke: cairo_save; cairo_fill; cairo_restore; cairo_stroke Instead we know have alternate versions cairo cairo_fill, cairo_stroke, and cairo_clip that preserve the current path rather than consuming it. So the idiom now becomes simply: cairo_fill_preserve; cairo_stroke + cairo_surface_write_to_png + cairo_surface_write_to_png_stream In place of a single PNG backend, now a surface created through any backend (except PDF currently) can be written out to a PNG image. + cairo_image_surface_create_from_png + cairo_image_surface_create_from_png_stream And its just as easy to load a PNG image into a surface as well. + cairo_append_path With the new, exposed path data structure, it's now possible to append bulk path data to the current path, (rather than issuing a long sequence of cairo_move_to/line_to/curve_to function calls). Xlib and XCB backends --------------------- Any cairo_format_t and Colormap arguments have been dropped from cairo_xlib_surface_create. There are also two new cairo_xlib|xcb_surface_create functions: cairo_xlib|xcb_surface_create_for_bitmap (Particular for creating A1 surfaces) cairo_xlib|xcb_surface_create_with_xrender_format (For any other surface types, not described by a Visual*) All of these surface create functions now accept width and height. In addition, there are new cairo_xlib|xcb_surface_set_size functions which must be called each time a window that is underlying a surface changes size. Print backends (PS and PDF) --------------------------- The old FILE* based interfaces have been eliminated. In their place we have two different functions. One accepts a simple const char *filename. The other is a more general function which accepts a callback write function and a void* closure. This should allow the flexibility needed to hook up with various stream object in many languages. In addition, when specifying the surface size during construction, the units are now device-space units (ie. points) rather than inches. This provides consistency with all the other surface types and also makes it much easier to reason about the size of the surface when drawing to it with the default identity matrix. Finally, the DPI parameters, which are only needed to control the quality of fallbacks, have been made optional. Nothing is required during surface_create (300 DPI is assumed) and cairo_ps|pdf_surface_set_dpi can be used to set alternate values if needed. Font system ----------- Owen very graciously listened to feedback after the big font rework he had done for 0.4, and came up with way to improve it even more. In 0.4 there was a cairo_font_t that was always pre-scaled. Now, there is an unscaled cairo_font_face_t which is easier to construct, (eg. no scaling matrix required) and work with, (it can be scaled and transformed after being set on the graphics state). And the font size manipulation functions are much easier. You can set an explicit size and read/modify/write the font matrix with: cairo_set_font_size cairo_get_font_matrix cairo_set_font_matrix (Previously you could only multiply in a scale factor or a matrix.) A pleasant side effect is that we can (and do) now have a default font size that is reasonable, as opposed to the old default height of one device-space unit which was useless until scaled. Of course, the old pre-scaled font had allowed some performance benefits when getting many metrics for a font. Those benefits are still made available through the new cairo_scaled_font_t. And a cairo_font_face_t can be "promoted" to a cairo_scaled_font_t by suppling a font_matrix and the desired CTM. Quartz backend -------------- Tim Rowley put in the work to bring the Quartz backend back after it had been disabled in the 0.4.0 snapshot. He was not able to bring back the function that allows one to create a cairo_font_t from an ATSUI style: cairo_font_t * cairo_atsui_font_create (ATSUStyle style); because he didn't have a test case for it. If you care about this function, please provide a fairly minimal test and we'll try to bring it back in an upcoming snapshot. Snapshot 0.4.0 (2005-03-08 Carl Worth ) ========================================================== New documentation ----------------- Owen Taylor has converted cairo's documentation system to gtk-doc and has begun some long-needed work on the documentation, which can now be viewed online here: http://cairographics.org/manual/ New backend: win32 ------------------ This is the first snapshot to include a functional win32 backend, (thanks to Owen Taylor). The interface is as follows: #include void cairo_set_target_win32 (cairo_t *cr, HDC hdc); cairo_surface_t * cairo_win32_surface_create (HDC hdc); cairo_font_t * cairo_win32_font_create_for_logfontw (LOGFONTW *logfont, cairo_matrix_t *scale); cairo_status_t cairo_win32_font_select_font (cairo_font_t *font, HDC hdc); void cairo_win32_font_done_font (cairo_font_t *font); double cairo_win32_font_get_scale_factor (cairo_font_t *font); And see also the documentation at: http://cairographics.org/manual/cairo-Microsoft-Windows-Backend.html Disabled backend: quartz ------------------------ Unfortunately, the quartz backend code is currently out of date with respect to some recent backend interface changes. So, the quartz backend is disabled in this snapshot. If the quartz backend is brought up-to-date before the next snapshot, we would be glad to make a 0.4.1 snapshot that re-enables it, (we do not expect many more big backend interface changes). API Changes ----------- The font system has been revamped, (as Owen Taylor's work with integrating pango and cairo gave us the first serious usage of the non-toy font API). One fundamental, user-visible change is that the cairo_font_t object now represents a font that is scaled to a particular device resolution. Further changes are described below. cairo.h ------- Removed cairo_font_set_transform and cairo_font_current_transform. Added cairo_font_extents and cairo_font_glyph_extents. See documentation for details: http://cairographics.org/manual/cairo-cairo-t.html#cairo-font-extents cairo-ft.h ---------- The cairo_ft_font API changed considerably. Please see the documentation for details: http://cairographics.org/manual/cairo-FreeType-Fonts.html Performance ----------- Make the fast-path clipping (pixel-aligned rectangles) faster. Add optimization for applying a constant alpha to a pattern. Optimize gradients that are horizontal or vertical in device space. Xlib: When RENDER is not available, use image surfaces for intermediate surfaces rather than xlib surfaces. Backend-specific changes ------------------------ Glitz ----- Major update to glitz backend. The output quality should now be just as good as the image and xlib backends. Track changes to glitz 0.4.0. PDF --- Various improvements to produce more conformant output. Internals --------- David Reveman contributed a large re-work of the cairo_pattern_t implementation, providing cleaner code and more optimization opportunities. Backend interface changes ------------------------- Rework backend interface to accept patterns, not surfaces for source and mask. Remove set_matrix, set_filter, and set_repeat functions. More sophisticated backend interface for image fallbacks, ({acquire,release}_{source,dest}_image() and clone_similar). Bug fixes --------- Only install header files for backends that have been compiled. Fixed some rounding errors leading to incorrectly placed glyphs. Many other minor fixes. Snapshot 0.3.0 (2005-01-21 Carl Worth ) ========================================================== Major API changes ----------------- 1) The public header files will no longer be directly installed into the system include directory. They will now be installed in a subdirectory named "cairo", (eg. in /usr/include/cairo rather than in /usr/include). As always, the easiest way for applications to discover the location of the header file is to let pkg-config generate the necessary -I CFLAGS and -L/-l LDFLAGS. For example: cc `pkg-config --cflags --libs cairo` -o foo foo.c IMPORTANT: Users with old versions of cairo installed will need to manually remove cairo.h and cairo-features.h from the system include directories in order to prevent the old headers from being used in preference to the new ones. 2) The backend-specific portions of the old monolithic cairo.h have been split out into individual public header files. The new files are: cairo-atsui.h cairo-ft.h cairo-glitz.h cairo-pdf.h cairo-png.h cairo-ps.h cairo-quartz.h cairo-xcb.h cairo-xlib.h Applications will need to be modified to explicitly include the new header files where appropriate. 3) There are two new graphics backends in this snapshot, a PDF backend, and a Quartz backend. There is also one new font backend, ATSUI. PDF backend ----------- Kristian Høgsberg has contributed a new backend to allow cairo-based applications to generate PDF output. The interface for creating a PDF surface is similar to that of the PS backend, as can be seen in cairo-pdf.h: void cairo_set_target_pdf (cairo_t *cr, FILE *file, double width_inches, double height_inches, double x_pixels_per_inch, double y_pixels_per_inch); cairo_surface_t * cairo_pdf_surface_create (FILE *file, double width_inches, double height_inches, double x_pixels_per_inch, double y_pixels_per_inch); Once a PDF surface has been created, applications can draw to it as any other cairo surface. This code is still a bit rough around the edges, and does not yet support clipping, surface patterns, or transparent gradients. Text only works with TrueType fonts at this point and only black text is supported. Also, the size of the generated PDF files is currently quite big. Kristian is still actively developing this backend, so watch this space for future progress. Quartz backend -------------- Calum Robinson has contributed a new backend to allow cairo applications to target native Mac OS X windows through the Quartz API. Geoff Norton integrated this backend into the current configure-based build system, while Calum also provided Xcode build support in the separate "macosx" module available in CVS. The new interface, available in cairo-quartz.h, is as follows: void cairo_set_target_quartz_context (cairo_t *cr, CGContextRef context, int width, int height); cairo_surface_t * cairo_quartz_surface_create (CGContextRef context, int width, int height); There is an example program available in CVS in cairo-demo/quartz. It is a port of Keith Packard's fdclock program originally written for the xlib backend. A screenshot of this program running on Mac OS X is available here: http://cairographics.org/~cworth/images/fdclock-quartz.png ATSUI font backend ------------------ This new font backend complements the Quartz backend by allowing applications to use native font selection on Mac OS X. The interface is a single new function: cairo_font_t * cairo_atsui_font_create (ATSUStyle style); Minor API changes ----------------- Prototype for non-existent function "cairo_ft_font_destroy" removed. Now depends on libpixman 0.1.2 or newer, (0.1.3 is being released concurrently and has some useful performance improvements). Default paint color is now opaque black, (was opaque white). Default background color is transparent (as before). Renamed "struct cairo" to "struct _cairo" to free up the word "cairo" from the C++ identifier name space. Functions returning multiple return values through provided pointers, (cairo_matrix_get_affine, cairo_current_point, and cairo_current_color_rgb), will now accept NULL for values the user wants to ignore. CAIRO_HAS_FREETYPE_FONT has now been renamed to CAIRO_HAS_FT_FONT. Performance improvements ------------------------ Alexander Larsson provided some fantastic performance improvements yielding a 10000% performance improvement in his application, (when also including his performance work in libpixman-0.1.3). These include * Fixed handling of cache misses. * Creating intermediate clip surfaces at the minimal size required. * Eliminating roundtrips when creating intermediate Xlib surfaces. Implementation -------------- Major re-work of font metrics system by Keith Packard. Font metrics should now be much more reliable. Glitz backend ------------- Updated for glitz-0.3.0. Bug fixes in reference counting. Test suite ---------- New tests for cache crashing, rotating text, improper filling of complex polygons, and leaky rasterization. Bug fixes --------- Fixed assertion failure when selecting the same font multiple times in sequence. Fixed reference counting so cache_destroy functions work. Remove unintended copyright statement from files generated with PostScript backend. Fixed to eliminate new warnings from gcc 3.4 and gcc 4. Snapshot 0.2.0 (2004-10-27 Carl Worth ) =========================================================== New license: LGPL/MPL --------------------- The most significant news with this release is that the license of cairo has changed. It is now dual-licensed under the LGPL and the MPL. For details see the COPYING file as well as COPYING-LGPL-2.1 and COPYING-MPL-1.1. I express my thanks to everyone involved in the license change process for their patience and support! New font and glyph internals ---------------------------- Graydon Hoare has put a tremendous amount of work into new internals for handling fonts and glyphs, including caches where appropriate. This work has no impact on the user-level API, but should result in great performance improvements for applications using text. New test suite -------------- This snapshot of cairo includes a (small) test suite in cairo/test. The tests can be run with "make check". The test suite was designed to make it very easy to add new tests, and we hope to see many contributions here. As you find bugs, please try adding a minimal test case to the suite, and submit it with the bug report to the cairo@cairographics.org mailing list. This will make it much easier for us to track progress in fixing bugs. New name for glitz backend -------------------------- The gl backend has now been renamed to the glitz backend. This means that the following names have changed: CAIRO_HAS_GL_SURFACE -> CAIRO_HAS_GLITZ_SURFACE cairo_set_target_gl -> cairo_set_target_glitz cairo_gl_surface_create -> cairo_glitz_surface_create This change obviously breaks backwards compatibility for applications using the old gl backend. Up-to-date with latest glitz snapshots -------------------------------------- This snapshot of cairo is now up to date with the latest glitz snapshot, (currently 0.2.3). We know that the latest cairo and glitz snapshots have been incompatible for a very long time. We've finally fixed that now and we're determined to not let that happen again. Revert some tessellation regression bugs ---------------------------------------- People that have been seeing some tessellation bugs, (eg. leaked fills), in the CVS version of cairo may have better luck with this release. A change since the last snapshot was identified to trigger some of these bugs and was reverted before making the snapshot. The behavior should be the same as the previous (0.1.23) snapshot. Miscellaneous changes --------------------- Changed CAIRO_FILTER_DEFAULT to CAIRO_FILTER_BEST to make gradients easier. Track XCB API change regarding iterators. Various bug fixes ----------------- Fix calculation of required number of vertices for pen. Fix to avoid zero-dimensioned pixmaps. Fix broken sort of pen vertices. Fix bug when cairo_show_text called with a NULL string. Fix clipping bugs. Fix bug in computing image length with XCB. Fix infinite loop bug in cairo_arc. Fix memory management interactions with libpixman. Snapshot 0.1.23 (2004-05-11 Carl Worth ) ======================================================== Fixes for gcc 3.4 ----------------- Fix prototype mismatches so that cairo can be built by gcc 3.4. Updates to track glitz ---------------------- Various fixes to support the latest glitz snapshot (0.1.2). Gradient updates ---------------- Radial gradients now support both inner and outer circles. Transformed linear gradients are now properly handled. Fixes for extend type reflect. Glitz updates ------------- Converted shading routines to use fixed point values and introduced a shading operator structure for more efficient shading calculations. Support compositing with mask surface when mask is solid or multi-texturing is available. PNG backend cleanups -------------------- Fix output to properly compensate for pre-multiplied alpha format in cairo. Add support for A8 and A1 image formats. Bug fixes --------- Avoid crash or infinite loop on null strings and degeneratively short splines. New? bugs in cairo_clip ----------------------- There are some fairly serious bugs in cairo_clip. It is sometimes causing an incorrect result. And even when it does work, it is sometimes so slow as to be unusable. Some of these bugs may not be new, (indeed cairo_clip has only ever had a braindead-slow implementation), but I think they're worth mentioning here. Snapshot 0.1.22 (2004-04-16 Carl Worth ) ======================================================== Cairo was updated to track the changes in libpixman, and now depends on libpixman version 0.1.1. Snapshot 0.1.21 (2004-04-09 David Reveman ) ============================================================= New OpenGL backend ------------------ The OpenGL backend provides hardware accelerated output for X11 and OS X. The significant new functions are: cairo_set_target_gl cairo_gl_surface_create Automatic detection of available backends ----------------------------------------- The configure script now automatically detect what backends are available, (use ./configure --disable-`backend' to prevent compilation of specific backends). Snapshot 0.1.20 (2004-04-06 Carl Worth ) ======================================================== New pattern API --------------- David Reveman has contributed a new pattern API which enable linear and radial gradient patterns in addition to the original surface-based patterns. The significant new top-level functions are: cairo_pattern_create_linear cairo_pattern_create_radial cairo_pattern_create_for_surface cairo_pattern_add_color_stop cairo_set_pattern Any code using the old cairo_set_pattern, (which accepted a cairo_surface_t rather than a cairo_pattern_t), will need to be updated. Update to XCB backend --------------------- The XCB backend is now enabled by default, (use ./configure --disable-xcb to turn it off). Faster clipping --------------- Graydon Hoare has added optimizations that make cairo_clip much faster when the path is a pixel-aligned, rectangular region. Bug fixes. Snapshot 0.1.19 (2004-02-24 Carl Worth ) ======================================================== New PNG backend --------------- Olivier Andrieu contributed a new PNG backend. It builds on the existing image backend to make it easy to render "directly" to a .png file. The user never needs to deal with the actual image buffer. The significant new functions are: cairo_set_target_png cairo_png_surface_create The PNG backend is not enabled by default so that by default there is not a new dependency on libpng. Use ./configure --enable-png to enable this backend. Snapshot 0.1.18 (2004-02-17 Carl Worth ) ======================================================== Path query functionality ------------------------ It's now possible to query the current path. The two new functions are: cairo_current_path cairo_current_path_flat Each function accepts a number of callback functions that will be called for each element in the path (move_to, line_to, curve_to, close_path). The cairo_current_path_flat function does not accept a curve_to callback. Instead, all curved portions of the path will be converted to line segments, (within the current tolerance value). This can be handy for doing things like text-on-path without having to manually interpolate Bézier splines. New XCB backend --------------- Jamey Sharp has contributed a second X backend that uses the new, lean XCB library rather than Xlib. It cannot currently be compiled at the same time as the Xlib backend. See ./configure --enable-xcb. Build fixes for cygwin. Bug fixes. Snapshot 0.1.17 (2003-12-16 Carl Worth ) ======================================================== Better text support ------------------- This snapshot provides much better text support by implementing the following four functions: cairo_text_extents cairo_glyph_extents cairo_text_path cairo_glyph_path The text/glyph_extents functions can be used to determine the bounding box (and advance) for text as if drawn by show_text/glyphs. The text/glyph_path objects functions place text shapes on the current path, where they can be subsequently manipulated. For example, following these functions with cairo_stroke allows outline text to be drawn. Calling cairo_clip allows clipping to a text-shaped region. Combined dependencies --------------------- The cairo core now depends only on the libpixman library. This single library replaces the three previous libraries libic, libpixregion, and slim. Thanks to Dave Beckett for all of the heavy lifting with this renaming effort. Conditional compilation of backends ----------------------------------- Cairo now allows optional backends to be disabled at compile time. The following options may now be passed to the configure script: --disable-xlib --disable-ps Note that the first option is a change from the old --without-x option which will no longer have any effect. OS X supported - several byte-order issues resolved --------------------------------------------------- Cairo has now been successfully compiled under OS X. Testing revealed that there were some byte-order problems in the PostScript backend and the PNG generation in the demos. These have now been resolved. 2003-10 ======= Graydon Hoare implemented the first real text support using Freetype/fontconfig, (previous versions of cairo used Xft and could only draw text when using an X backend). 2003-09 ======= Graydon Hoare added the first real support for running cairo with a non-render-aware X server. Jamey Sharp virtualized the backend font and surface interfaces in September, 2003. 2003-06 ======= Xr is renamed cairo to avoid confusion since it no longer had a strict dependence on X. 2003-05 ======= A new image surface backend is added to Xr. Keith Packard wrote the image compositing code in libic that is used for the image_surface backend. This code was originally written as the software fallback for the render extension within the X server. 2002-06 ======= Carl Worth wrote the first lines of Xr, after Keith Packard proposed the plan for a stateful drawing library in C providing a PostScript-like rendering model.