From 3c5772a5279de9eadfff7adb5ddea08106495fff Mon Sep 17 00:00:00 2001 From: Javier Cardona Date: Mon, 10 Aug 2009 12:15:48 -0700 Subject: mac80211: Use 3-address format for mesh broadcast frames. The 11s task group recently changed the frame mesh multicast/broadcast frame format to use 3-address. This was done to avoid interactions with widely deployed lazy-WDS access points. This patch changes the format of group addressed frames, both mesh-originated and proxied, to use the data format defined in draft D2.08 and forward. The address fields used for group addressed frames is: In 802.11 header ToDS:0 FromDS:1 addr1: DA (broadcast/multicast address) addr2: TA addr3: Mesh SA In address extension header: addr4: SA (only present if frame was proxied) Note that this change breaks backward compatibility with earlier mesh stack versions. Signed-off-by: Andrey Yurovsky Signed-off-by: Javier Cardona Signed-off-by: John W. Linville --- net/mac80211/tx.c | 64 +++++++++++++++++++++++++++++-------------------------- 1 file changed, 34 insertions(+), 30 deletions(-) (limited to 'net/mac80211/tx.c') diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c index 32442980cc24..ee8aa76f071a 100644 --- a/net/mac80211/tx.c +++ b/net/mac80211/tx.c @@ -1414,9 +1414,7 @@ static void ieee80211_xmit(struct ieee80211_sub_if_data *sdata, if (ieee80211_vif_is_mesh(&sdata->vif) && ieee80211_is_data(hdr->frame_control)) { - if (is_multicast_ether_addr(hdr->addr3)) - memcpy(hdr->addr1, hdr->addr3, ETH_ALEN); - else + if (!is_multicast_ether_addr(hdr->addr1)) if (mesh_nexthop_lookup(skb, sdata)) { dev_put(sdata->dev); return; @@ -1619,52 +1617,58 @@ int ieee80211_subif_start_xmit(struct sk_buff *skb, break; #ifdef CONFIG_MAC80211_MESH case NL80211_IFTYPE_MESH_POINT: - fc |= cpu_to_le16(IEEE80211_FCTL_FROMDS | IEEE80211_FCTL_TODS); if (!sdata->u.mesh.mshcfg.dot11MeshTTL) { /* Do not send frames with mesh_ttl == 0 */ sdata->u.mesh.mshstats.dropped_frames_ttl++; ret = NETDEV_TX_OK; goto fail; } - memset(&mesh_hdr, 0, sizeof(mesh_hdr)); if (compare_ether_addr(dev->dev_addr, skb->data + ETH_ALEN) == 0) { - /* RA TA DA SA */ - memset(hdr.addr1, 0, ETH_ALEN); - memcpy(hdr.addr2, dev->dev_addr, ETH_ALEN); - memcpy(hdr.addr3, skb->data, ETH_ALEN); - memcpy(hdr.addr4, skb->data + ETH_ALEN, ETH_ALEN); - meshhdrlen = ieee80211_new_mesh_header(&mesh_hdr, sdata); + hdrlen = ieee80211_fill_mesh_addresses(&hdr, &fc, + skb->data, skb->data + ETH_ALEN); + meshhdrlen = ieee80211_new_mesh_header(&mesh_hdr, + sdata, NULL, NULL, NULL); } else { /* packet from other interface */ struct mesh_path *mppath; + int is_mesh_mcast = 1; + char *mesh_da; - memset(hdr.addr1, 0, ETH_ALEN); - memcpy(hdr.addr2, dev->dev_addr, ETH_ALEN); - memcpy(hdr.addr4, dev->dev_addr, ETH_ALEN); - + rcu_read_lock(); if (is_multicast_ether_addr(skb->data)) - memcpy(hdr.addr3, skb->data, ETH_ALEN); + /* DA TA mSA AE:SA */ + mesh_da = skb->data; else { - rcu_read_lock(); mppath = mpp_path_lookup(skb->data, sdata); - if (mppath) - memcpy(hdr.addr3, mppath->mpp, ETH_ALEN); - else - memset(hdr.addr3, 0xff, ETH_ALEN); - rcu_read_unlock(); + if (mppath) { + /* RA TA mDA mSA AE:DA SA */ + mesh_da = mppath->mpp; + is_mesh_mcast = 0; + } else + /* DA TA mSA AE:SA */ + mesh_da = dev->broadcast; } + hdrlen = ieee80211_fill_mesh_addresses(&hdr, &fc, + mesh_da, dev->dev_addr); + rcu_read_unlock(); + if (is_mesh_mcast) + meshhdrlen = + ieee80211_new_mesh_header(&mesh_hdr, + sdata, + skb->data + ETH_ALEN, + NULL, + NULL); + else + meshhdrlen = + ieee80211_new_mesh_header(&mesh_hdr, + sdata, + NULL, + skb->data, + skb->data + ETH_ALEN); - mesh_hdr.flags |= MESH_FLAGS_AE_A5_A6; - mesh_hdr.ttl = sdata->u.mesh.mshcfg.dot11MeshTTL; - put_unaligned(cpu_to_le32(sdata->u.mesh.mesh_seqnum), &mesh_hdr.seqnum); - memcpy(mesh_hdr.eaddr1, skb->data, ETH_ALEN); - memcpy(mesh_hdr.eaddr2, skb->data + ETH_ALEN, ETH_ALEN); - sdata->u.mesh.mesh_seqnum++; - meshhdrlen = 18; } - hdrlen = 30; break; #endif case NL80211_IFTYPE_STATION: -- cgit v1.2.3