From 45b3947c2de5841d691f1d27d30419b9fae2d86c Mon Sep 17 00:00:00 2001 From: Al Viro Date: Mon, 12 May 2008 11:55:10 +0800 Subject: [Blackfin] arch: Blackfin checksum annotations FSVOtest in this case, since I don't have the hardware... However, all changes seen by gcc are actually - explicit cast to unsigned short in return expression of functions returning unsigned short - csum_fold() return type changed from unsigned int to __sum16 (unsigned short), same as for all other architecture and as net/* expects; expression actually returned is ((~(sum << 16)) >> 16) with sum being unsigned 32bit, so it's (a) going to fit into the range of unsigned short and (b) had been unsigned all along, so no sign expansion mess happened. Tested-by: Bryan Wu Signed-off-by: Al Viro Signed-off-by: David Miller Signed-off-by: Bryan Wu --- arch/blackfin/lib/checksum.c | 21 ++++++++++----------- 1 file changed, 10 insertions(+), 11 deletions(-) (limited to 'arch') diff --git a/arch/blackfin/lib/checksum.c b/arch/blackfin/lib/checksum.c index 42768e0c80ca..5c87505165d3 100644 --- a/arch/blackfin/lib/checksum.c +++ b/arch/blackfin/lib/checksum.c @@ -72,9 +72,9 @@ static unsigned short do_csum(const unsigned char *buff, int len) * This is a version of ip_compute_csum() optimized for IP headers, * which always checksum on 4 octet boundaries. */ -unsigned short ip_fast_csum(unsigned char *iph, unsigned int ihl) +__sum16 ip_fast_csum(unsigned char *iph, unsigned int ihl) { - return ~do_csum(iph, ihl * 4); + return (__force __sum16)~do_csum(iph, ihl * 4); } /* @@ -89,7 +89,7 @@ unsigned short ip_fast_csum(unsigned char *iph, unsigned int ihl) * * it's best to have buff aligned on a 32-bit boundary */ -unsigned int csum_partial(const unsigned char *buff, int len, unsigned int sum) +__wsum csum_partial(const void *buff, int len, __wsum sum) { /* * Just in case we get nasty checksum data... @@ -109,22 +109,22 @@ unsigned int csum_partial(const unsigned char *buff, int len, unsigned int sum) * this routine is used for miscellaneous IP-like checksums, mainly * in icmp.c */ -unsigned short ip_compute_csum(const unsigned char *buff, int len) +__sum16 ip_compute_csum(const void *buff, int len) { - return ~do_csum(buff, len); + return (__force __sum16)~do_csum(buff, len); } /* * copy from fs while checksumming, otherwise like csum_partial */ -unsigned int -csum_partial_copy_from_user(const unsigned char *src, unsigned char *dst, - int len, int sum, int *csum_err) +__wsum +csum_partial_copy_from_user(const void __user *src, void *dst, + int len, __wsum sum, int *csum_err) { if (csum_err) *csum_err = 0; - memcpy(dst, src, len); + memcpy(dst, (__force void *)src, len); return csum_partial(dst, len, sum); } @@ -132,8 +132,7 @@ csum_partial_copy_from_user(const unsigned char *src, unsigned char *dst, * copy from ds while checksumming, otherwise like csum_partial */ -unsigned int csum_partial_copy(const unsigned char *src, unsigned char *dst, - int len, int sum) +__wsum csum_partial_copy(const void *src, void *dst, int len, __wsum sum) { memcpy(dst, src, len); return csum_partial(dst, len, sum); -- cgit v1.2.3 From 9cd9c616f5890c9345546e03c99ba392b7a82cdf Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Tue, 13 May 2008 12:31:32 +0800 Subject: [Blackfin] arch: rename bf5xx-flash to bfin-async-flash - move all kconfig board settings into board resources - fixup casting style according to lkml feedback - rewrite driver so that it can handle arbitrary of instances according to the declared platform resources Signed-off-by: Mike Frysinger Cc: Joern Engel Signed-off-by: Bryan Wu --- arch/blackfin/Kconfig | 10 ---------- arch/blackfin/mach-bf533/boards/stamp.c | 24 ++++++++++++++---------- 2 files changed, 14 insertions(+), 20 deletions(-) (limited to 'arch') diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig index fd5708523f2e..785d8b4fa0cb 100644 --- a/arch/blackfin/Kconfig +++ b/arch/blackfin/Kconfig @@ -479,16 +479,6 @@ comment "Memory Setup" comment "Misc" -config ENET_FLASH_PIN - int "PF port/pin used for flash and ethernet sharing" - depends on (BFIN533_STAMP) - default 0 - help - PF port/pin used for flash and ethernet sharing to allow other PF - pins to be used on other platforms without having to touch common - code. - For example: PF0 --> 0,PF1 --> 1,PF2 --> 2, etc. - choice prompt "Blackfin Exception Scratch Register" default BFIN_SCRATCH_REG_RETN diff --git a/arch/blackfin/mach-bf533/boards/stamp.c b/arch/blackfin/mach-bf533/boards/stamp.c index 7fd35fb32fd5..ec05b236dc3f 100644 --- a/arch/blackfin/mach-bf533/boards/stamp.c +++ b/arch/blackfin/mach-bf533/boards/stamp.c @@ -111,7 +111,7 @@ static struct platform_device net2272_bfin_device = { }; #endif -#if defined(CONFIG_MTD_BF5xx) || defined(CONFIG_MTD_BF5xx_MODULE) +#if defined(CONFIG_MTD_BFIN_ASYNC) || defined(CONFIG_MTD_BFIN_ASYNC_MODULE) static struct mtd_partition stamp_partitions[] = { { .name = "Bootloader", @@ -141,13 +141,17 @@ static struct resource stamp_flash_resource[] = { .end = 0x203fffff, .flags = IORESOURCE_MEM, }, { - .start = CONFIG_ENET_FLASH_PIN, + .start = 0x7BB07BB0, /* AMBCTL0 setting when accessing flash */ + .end = 0x7BB07BB0, /* AMBCTL1 setting when accessing flash */ + .flags = IORESOURCE_MEM, + }, { + .start = GPIO_PF0, .flags = IORESOURCE_IRQ, } }; static struct platform_device stamp_flash_device = { - .name = "BF5xx-Flash", + .name = "bfin-async-flash", .id = 0, .dev = { .platform_data = &stamp_flash_data, @@ -595,7 +599,7 @@ static struct platform_device *stamp_devices[] __initdata = { &bfin_gpios_device, -#if defined(CONFIG_MTD_BF5xx) || defined(CONFIG_MTD_BF5xx_MODULE) +#if defined(CONFIG_MTD_BFIN_ASYNC) || defined(CONFIG_MTD_BFIN_ASYNC_MODULE) &stamp_flash_device, #endif }; @@ -617,8 +621,8 @@ static int __init stamp_init(void) #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) /* setup BF533_STAMP CPLD to route AMS3 to Ethernet MAC */ - bfin_write_FIO_DIR(bfin_read_FIO_DIR() | (1 << CONFIG_ENET_FLASH_PIN)); - bfin_write_FIO_FLAG_S(1 << CONFIG_ENET_FLASH_PIN); + bfin_write_FIO_DIR(bfin_read_FIO_DIR() | PF0); + bfin_write_FIO_FLAG_S(PF0); SSYNC(); #endif @@ -636,8 +640,8 @@ arch_initcall(stamp_init); void native_machine_restart(char *cmd) { -#define BIT_TO_SET (1 << CONFIG_ENET_FLASH_PIN) - bfin_write_FIO_INEN(~BIT_TO_SET); - bfin_write_FIO_DIR(BIT_TO_SET); - bfin_write_FIO_FLAG_C(BIT_TO_SET); + /* workaround pull up on cpld / flash pin not being strong enough */ + bfin_write_FIO_INEN(~PF0); + bfin_write_FIO_DIR(PF0); + bfin_write_FIO_FLAG_C(PF0); } -- cgit v1.2.3 From 5ce998cf6d1dbb28f14dea879a366ed5348f9681 Mon Sep 17 00:00:00 2001 From: Michael Hennerich Date: Sat, 17 May 2008 15:57:01 +0800 Subject: Blackfin arch: Check for Anomaly 05000182 IMDMA does not operate to full speed for 600MHz and higher devices Signed-off-by: Michael Hennerich Signed-off-by: Bryan Wu --- arch/blackfin/kernel/bfin_dma_5xx.c | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'arch') diff --git a/arch/blackfin/kernel/bfin_dma_5xx.c b/arch/blackfin/kernel/bfin_dma_5xx.c index fd5448d6107c..d54f19085f37 100644 --- a/arch/blackfin/kernel/bfin_dma_5xx.c +++ b/arch/blackfin/kernel/bfin_dma_5xx.c @@ -90,6 +90,17 @@ int request_dma(unsigned int channel, char *device_id) { pr_debug("request_dma() : BEGIN \n"); + +#if defined(CONFIG_BF561) && ANOMALY_05000182 + if (channel >= CH_IMEM_STREAM0_DEST && channel <= CH_IMEM_STREAM1_DEST) { + if (get_cclk() > 500000000) { + printk(KERN_WARNING + "Request IMDMA failed due to ANOMALY 05000182\n"); + return -EFAULT; + } + } +#endif + mutex_lock(&(dma_ch[channel].dmalock)); if ((dma_ch[channel].chan_status == DMA_CHANNEL_REQUESTED) -- cgit v1.2.3 From 803a8d2acbf220aeb27f0a98dacb36d4af3d6559 Mon Sep 17 00:00:00 2001 From: Michael Hennerich Date: Sat, 17 May 2008 16:01:51 +0800 Subject: Blackfin arch: Add workaround to read edge triggered GPIOs Signed-off-by: Michael Hennerich Signed-off-by: Bryan Wu --- arch/blackfin/kernel/bfin_gpio.c | 19 +++++++++++++++++++ include/asm-blackfin/gpio.h | 1 - 2 files changed, 19 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/blackfin/kernel/bfin_gpio.c b/arch/blackfin/kernel/bfin_gpio.c index 7e8eaf4a31bb..b6d89d1644cc 100644 --- a/arch/blackfin/kernel/bfin_gpio.c +++ b/arch/blackfin/kernel/bfin_gpio.c @@ -1130,6 +1130,25 @@ void bfin_gpio_irq_prepare(unsigned gpio) #else +int gpio_get_value(unsigned gpio) +{ + unsigned long flags; + int ret; + + if (unlikely(get_gpio_edge(gpio))) { + local_irq_save(flags); + set_gpio_edge(gpio, 0); + ret = get_gpio_data(gpio); + set_gpio_edge(gpio, 1); + local_irq_restore(flags); + + return ret; + } else + return get_gpio_data(gpio); +} +EXPORT_SYMBOL(gpio_get_value); + + int gpio_direction_input(unsigned gpio) { unsigned long flags; diff --git a/include/asm-blackfin/gpio.h b/include/asm-blackfin/gpio.h index 27ff532a806c..ff95e9d88342 100644 --- a/include/asm-blackfin/gpio.h +++ b/include/asm-blackfin/gpio.h @@ -437,7 +437,6 @@ void gpio_set_value(unsigned gpio, int arg); int gpio_get_value(unsigned gpio); #ifndef BF548_FAMILY -#define gpio_get_value(gpio) get_gpio_data(gpio) #define gpio_set_value(gpio, value) set_gpio_data(gpio, value) #endif -- cgit v1.2.3 From c6c6f75d54ca734c409e336245662934c21fcee0 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Sat, 17 May 2008 16:18:08 +0800 Subject: Blackfin arch: cleanup the icplb/dcplb multiple hit checks so that we always send the same signal and we handle the NULL ptr condition properly Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu --- arch/blackfin/kernel/traps.c | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) (limited to 'arch') diff --git a/arch/blackfin/kernel/traps.c b/arch/blackfin/kernel/traps.c index 5b847070dae5..7bfbd958980c 100644 --- a/arch/blackfin/kernel/traps.c +++ b/arch/blackfin/kernel/traps.c @@ -364,13 +364,13 @@ asmlinkage void trap_c(struct pt_regs *fp) /* 0x27 - Data CPLB Multiple Hits - Linux Trap Zero, handled here */ case VEC_CPLB_MHIT: info.si_code = ILL_CPLB_MULHIT; -#ifdef CONFIG_DEBUG_HUNT_FOR_ZERO sig = SIGSEGV; - printk(KERN_NOTICE "NULL pointer access (probably)\n"); -#else - sig = SIGILL; - printk(KERN_NOTICE EXC_0x27(KERN_NOTICE)); +#ifdef CONFIG_DEBUG_HUNT_FOR_ZERO + if (saved_dcplb_fault_addr < (void *)FIXED_CODE_START) + printk(KERN_NOTICE "NULL pointer access\n"); + else #endif + printk(KERN_NOTICE EXC_0x27(KERN_NOTICE)); CHK_DEBUGGER_TRAP(); break; /* 0x28 - Emulation Watchpoint, handled here */ @@ -419,13 +419,13 @@ asmlinkage void trap_c(struct pt_regs *fp) /* 0x2D - Instruction CPLB Multiple Hits, handled here */ case VEC_CPLB_I_MHIT: info.si_code = ILL_CPLB_MULHIT; -#ifdef CONFIG_DEBUG_HUNT_FOR_ZERO sig = SIGSEGV; - printk(KERN_NOTICE "Jump to address 0 - 0x0fff\n"); -#else - sig = SIGILL; - printk(KERN_NOTICE EXC_0x2D(KERN_NOTICE)); +#ifdef CONFIG_DEBUG_HUNT_FOR_ZERO + if (saved_icplb_fault_addr < (void *)FIXED_CODE_START) + printk(KERN_NOTICE "Jump to NULL address\n"); + else #endif + printk(KERN_NOTICE EXC_0x2D(KERN_NOTICE)); CHK_DEBUGGER_TRAP(); break; /* 0x2E - Illegal use of Supervisor Resource, handled here */ -- cgit v1.2.3 From 86ad79321cbacdc4deebcde81849d19e26dd18e2 Mon Sep 17 00:00:00 2001 From: Cliff Cai Date: Sat, 17 May 2008 16:36:52 +0800 Subject: Blackfin arch: enable a choice to provide 4M DMA memory support two cascaded AD73322 cards, more uncached DMA memory is needed, so add a choice to provide 4M DMA memory Signed-off-by: Cliff Cai Signed-off-by: Bryan Wu --- arch/blackfin/Kconfig | 2 ++ include/asm-blackfin/bfin-global.h | 4 +++- 2 files changed, 5 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig index 785d8b4fa0cb..b87634e75f20 100644 --- a/arch/blackfin/Kconfig +++ b/arch/blackfin/Kconfig @@ -685,6 +685,8 @@ choice prompt "Uncached SDRAM region" default DMA_UNCACHED_1M depends on BFIN_DMA_5XX +config DMA_UNCACHED_4M + bool "Enable 4M DMA region" config DMA_UNCACHED_2M bool "Enable 2M DMA region" config DMA_UNCACHED_1M diff --git a/include/asm-blackfin/bfin-global.h b/include/asm-blackfin/bfin-global.h index 716df7c85923..a9248d883675 100644 --- a/include/asm-blackfin/bfin-global.h +++ b/include/asm-blackfin/bfin-global.h @@ -37,7 +37,9 @@ #include #include -#if defined(CONFIG_DMA_UNCACHED_2M) +#if defined(CONFIG_DMA_UNCACHED_4M) +# define DMA_UNCACHED_REGION (4 * 1024 * 1024) +#elif defined(CONFIG_DMA_UNCACHED_2M) # define DMA_UNCACHED_REGION (2 * 1024 * 1024) #elif defined(CONFIG_DMA_UNCACHED_1M) # define DMA_UNCACHED_REGION (1024 * 1024) -- cgit v1.2.3 From 59069676383c6446f50555e04aed7f51d5de695e Mon Sep 17 00:00:00 2001 From: Michael Hennerich Date: Sat, 17 May 2008 16:38:52 +0800 Subject: Blackfin arch: IO Port functions to read/write unalligned memory Signed-off-by: Michael Hennerich Signed-off-by: Bryan Wu --- arch/blackfin/kernel/bfin_ksyms.c | 2 ++ arch/blackfin/lib/ins.S | 21 ++++++++++++++++++--- arch/blackfin/lib/outs.S | 16 +++++++++++++++- include/asm-blackfin/io.h | 2 ++ 4 files changed, 37 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/blackfin/kernel/bfin_ksyms.c b/arch/blackfin/kernel/bfin_ksyms.c index 053edff6c0d8..4367330909b2 100644 --- a/arch/blackfin/kernel/bfin_ksyms.c +++ b/arch/blackfin/kernel/bfin_ksyms.c @@ -90,7 +90,9 @@ EXPORT_SYMBOL(__umodsi3); EXPORT_SYMBOL(outsb); EXPORT_SYMBOL(insb); EXPORT_SYMBOL(outsw); +EXPORT_SYMBOL(outsw_8); EXPORT_SYMBOL(insw); +EXPORT_SYMBOL(insw_8); EXPORT_SYMBOL(outsl); EXPORT_SYMBOL(insl); EXPORT_SYMBOL(insl_16); diff --git a/arch/blackfin/lib/ins.S b/arch/blackfin/lib/ins.S index df7b8833a0c5..eba2343b1b59 100644 --- a/arch/blackfin/lib/ins.S +++ b/arch/blackfin/lib/ins.S @@ -7,7 +7,7 @@ * Description: Implementation of ins{bwl} for BlackFin processors using zero overhead loops. * * Modified: - * Copyright 2004-2006 Analog Devices Inc. + * Copyright 2004-2008 Analog Devices Inc. * Copyright (C) 2005 Bas Vermeulen, BuyWays BV * * Bugs: Enter bugs at http://blackfin.uclinux.org/ @@ -63,6 +63,23 @@ ENTRY(_insw) RTS; ENDPROC(_insw) +ENTRY(_insw_8) + P0 = R0; /* P0 = port */ + cli R3; + P1 = R1; /* P1 = address */ + P2 = R2; /* P2 = count */ + SSYNC; + LSETUP( .Lword8_loop_s, .Lword8_loop_e) LC0 = P2; +.Lword8_loop_s: R0 = W[P0]; + B[P1++] = R0; + R0 = R0 >> 8; + B[P1++] = R0; + NOP; +.Lword8_loop_e: NOP; + sti R3; + RTS; +ENDPROC(_insw_8) + ENTRY(_insb) P0 = R0; /* P0 = port */ cli R3; @@ -78,8 +95,6 @@ ENTRY(_insb) RTS; ENDPROC(_insb) - - ENTRY(_insl_16) P0 = R0; /* P0 = port */ cli R3; diff --git a/arch/blackfin/lib/outs.S b/arch/blackfin/lib/outs.S index 4c3da8ae094e..3daf96035bf6 100644 --- a/arch/blackfin/lib/outs.S +++ b/arch/blackfin/lib/outs.S @@ -7,7 +7,7 @@ * Description: Implementation of outs{bwl} for BlackFin processors using zero overhead loops. * * Modified: Copyright (C) 2005 Bas Vermeulen, BuyWays BV - * Copyright 2004-2006 Analog Devices Inc. + * Copyright 2004-2008 Analog Devices Inc. * * Bugs: Enter bugs at http://blackfin.uclinux.org/ * @@ -63,3 +63,17 @@ ENTRY(_outsb) .Lbyte_loop_e: B[P0] = R0; RTS; ENDPROC(_outsb) + +ENTRY(_outsw_8) + P0 = R0; /* P0 = port */ + P1 = R1; /* P1 = address */ + P2 = R2; /* P2 = count */ + + LSETUP( .Lword8_loop_s, .Lword8_loop_e) LC0 = P2; +.Lword8_loop_s: R1 = B[P1++]; + R0 = B[P1++]; + R0 = R0 << 8; + R0 = R0 + R1; +.Lword8_loop_e: W[P0] = R0; + RTS; +ENDPROC(_outsw) diff --git a/include/asm-blackfin/io.h b/include/asm-blackfin/io.h index 574fe56989d1..cbbf7ffdbbff 100644 --- a/include/asm-blackfin/io.h +++ b/include/asm-blackfin/io.h @@ -117,10 +117,12 @@ static inline unsigned int readl(const volatile void __iomem *addr) extern void outsb(unsigned long port, const void *addr, unsigned long count); extern void outsw(unsigned long port, const void *addr, unsigned long count); +extern void outsw_8(unsigned long port, const void *addr, unsigned long count); extern void outsl(unsigned long port, const void *addr, unsigned long count); extern void insb(unsigned long port, void *addr, unsigned long count); extern void insw(unsigned long port, void *addr, unsigned long count); +extern void insw_8(unsigned long port, void *addr, unsigned long count); extern void insl(unsigned long port, void *addr, unsigned long count); extern void insl_16(unsigned long port, void *addr, unsigned long count); -- cgit v1.2.3 From ecb9567e287e082f78fcf055e34613eaf1f7df24 Mon Sep 17 00:00:00 2001 From: Michael Hennerich Date: Mon, 19 May 2008 14:56:33 +0800 Subject: Blackfin arch: update boards defconfig files Signed-off-by: Michael Hennerich Signed-off-by: Bryan Wu --- arch/blackfin/configs/BF527-EZKIT_defconfig | 348 ++++++++++++----------- arch/blackfin/configs/BF548-EZKIT_defconfig | 416 ++++++++++++++++------------ arch/blackfin/configs/IP0X_defconfig | 2 +- 3 files changed, 423 insertions(+), 343 deletions(-) (limited to 'arch') diff --git a/arch/blackfin/configs/BF527-EZKIT_defconfig b/arch/blackfin/configs/BF527-EZKIT_defconfig index 64876dfc2e55..5e6fb9d8e50f 100644 --- a/arch/blackfin/configs/BF527-EZKIT_defconfig +++ b/arch/blackfin/configs/BF527-EZKIT_defconfig @@ -1,6 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.22.16 +# Linux kernel version: 2.6.24.7 +# Fri May 16 10:02:29 2008 # # CONFIG_MMU is not set # CONFIG_FPU is not set @@ -13,35 +14,34 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_GENERIC_TIME=y CONFIG_GENERIC_GPIO=y CONFIG_FORCE_MAX_ZONEORDER=14 CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # -# Code maturity level options +# General setup # CONFIG_EXPERIMENTAL=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SYSVIPC=y -# CONFIG_IPC_NS is not set CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_UTS_NS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set # CONFIG_AUDIT is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +CONFIG_FAIR_GROUP_SCHED=y +CONFIG_FAIR_USER_SCHED=y +# CONFIG_FAIR_CGROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y # CONFIG_RELAY is not set CONFIG_BLK_DEV_INITRD=y @@ -64,32 +64,24 @@ CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_EVENTFD=y CONFIG_VM_EVENT_COUNTERS=y -CONFIG_BIG_ORDER_ALLOC_NOFAIL_MAGIC=3 -# CONFIG_NP2 is not set CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y CONFIG_TINY_SHMEM=y CONFIG_BASE_SMALL=0 - -# -# Loadable module support -# CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y - -# -# Block layer -# CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set # # IO Schedulers @@ -141,7 +133,6 @@ CONFIG_BF_REV_0_0=y # CONFIG_BF_REV_ANY is not set # CONFIG_BF_REV_NONE is not set CONFIG_BF52x=y -CONFIG_BFIN_SINGLE_CORE=y CONFIG_MEM_MT48LC32M16A2TG_75=y CONFIG_BFIN527_EZKIT=y @@ -227,12 +218,14 @@ CONFIG_IRQ_USB_DMA=11 # Board customizations # # CONFIG_CMDLINE_BOOL is not set +CONFIG_BOOT_LOAD=0x1000 # # Clock/PLL Setup # CONFIG_CLKIN_HZ=25000000 # CONFIG_BFIN_KERNEL_CLOCK is not set +CONFIG_MAX_MEM_SIZE=512 CONFIG_MAX_VCO_HZ=600000000 CONFIG_MIN_VCO_HZ=50000000 CONFIG_MAX_SCLK_HZ=133333333 @@ -246,13 +239,17 @@ CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +# CONFIG_CYCLES_CLOCKSOURCE is not set +# CONFIG_TICK_ONESHOT is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y # -# Memory Setup +# Misc # -CONFIG_MAX_MEM_SIZE=512 -CONFIG_MEM_ADD_WIDTH=10 -CONFIG_BOOT_LOAD=0x1000 CONFIG_BFIN_SCRATCH_REG_RETN=y # CONFIG_BFIN_SCRATCH_REG_RETE is not set # CONFIG_BFIN_SCRATCH_REG_CYCLES is not set @@ -288,12 +285,14 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 -CONFIG_LARGE_ALLOCS=y +CONFIG_VIRT_TO_BUS=y # CONFIG_BFIN_GPTIMERS is not set CONFIG_BFIN_DMA_5XX=y +# CONFIG_DMA_UNCACHED_4M is not set # CONFIG_DMA_UNCACHED_2M is not set CONFIG_DMA_UNCACHED_1M=y # CONFIG_DMA_UNCACHED_NONE is not set @@ -338,10 +337,6 @@ CONFIG_BANK_3=0xFFC0 # # CONFIG_PCI is not set # CONFIG_ARCH_SUPPORTS_MSI is not set - -# -# PCCARD (PCMCIA/CardBus) support -# # CONFIG_PCCARD is not set # @@ -357,8 +352,14 @@ CONFIG_BINFMT_ZFLAT=y # Power management options # # CONFIG_PM is not set +CONFIG_SUSPEND_UP_POSSIBLE=y # CONFIG_PM_WAKEUP_BY_GPIO is not set +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set + # # Networking # @@ -395,6 +396,7 @@ CONFIG_SYN_COOKIES=y CONFIG_INET_XFRM_MODE_TRANSPORT=y CONFIG_INET_XFRM_MODE_TUNNEL=y CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set @@ -421,10 +423,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# # CONFIG_NET_SCHED is not set # @@ -444,6 +442,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set # CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set # # Device Drivers @@ -452,14 +451,11 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # Generic Driver Options # +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set # CONFIG_SYS_HYPERVISOR is not set - -# -# Connector - unified userspace <-> kernelspace linker -# # CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set @@ -479,6 +475,7 @@ CONFIG_MTD_BLOCK=y # CONFIG_INFTL is not set # CONFIG_RFD_FTL is not set # CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set # # RAM/ROM/Flash chip drivers @@ -542,39 +539,27 @@ CONFIG_MTD_NAND_IDS=m # CONFIG_MTD_NAND_DISKONCHIP is not set # CONFIG_MTD_NAND_NANDSIM is not set # CONFIG_MTD_NAND_PLATFORM is not set +# CONFIG_MTD_ALAUDA is not set # CONFIG_MTD_ONENAND is not set # # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set - -# -# Parallel port support -# # CONFIG_PARPORT is not set - -# -# Plug and Play support -# -# CONFIG_PNPACPI is not set - -# -# Block devices -# +CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set # CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_UB is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set - -# -# Misc devices -# +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set # CONFIG_IDE is not set # @@ -582,22 +567,18 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # # CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set # CONFIG_SCSI_NETLINK is not set # CONFIG_ATA is not set - -# -# Multi-device support (RAID and LVM) -# # CONFIG_MD is not set - -# -# Network device support -# CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set +# CONFIG_VETH is not set CONFIG_PHYLIB=y # @@ -611,21 +592,24 @@ CONFIG_PHYLIB=y # CONFIG_VITESSE_PHY is not set # CONFIG_SMSC_PHY is not set # CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set # CONFIG_FIXED_PHY is not set - -# -# Ethernet (10 or 100Mbit) -# +# CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y -# CONFIG_SMC91X is not set CONFIG_BFIN_MAC=y CONFIG_BFIN_MAC_USE_L1=y CONFIG_BFIN_TX_DESC_NUM=10 CONFIG_BFIN_RX_DESC_NUM=20 CONFIG_BFIN_MAC_RMII=y +# CONFIG_SMC91X is not set # CONFIG_SMSC911X is not set # CONFIG_DM9000 is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_B44 is not set CONFIG_NETDEV_1000=y # CONFIG_AX88180 is not set CONFIG_NETDEV_10000=y @@ -635,6 +619,15 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set @@ -642,15 +635,7 @@ CONFIG_NETDEV_10000=y # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# # CONFIG_ISDN is not set - -# -# Telephony Support -# # CONFIG_PHONE is not set # @@ -665,7 +650,6 @@ CONFIG_INPUT=y # # CONFIG_INPUT_MOUSEDEV is not set # CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set # CONFIG_INPUT_EVDEV is not set # CONFIG_INPUT_EVBUG is not set @@ -697,7 +681,6 @@ CONFIG_INPUT_MISC=y # # CONFIG_AD9960 is not set # CONFIG_SPI_ADC_BF533 is not set -# CONFIG_BF5xx_PFLAGS is not set # CONFIG_BF5xx_PPIFCD is not set # CONFIG_BFIN_SIMPLE_TIMER is not set # CONFIG_BF5xx_PPI is not set @@ -706,7 +689,7 @@ CONFIG_BFIN_OTP=y # CONFIG_BFIN_SPORT is not set # CONFIG_BFIN_TIMER_LATENCY is not set # CONFIG_TWI_LCD is not set -# CONFIG_AD5304 is not set +# CONFIG_SIMPLE_GPIO is not set # CONFIG_VT is not set # CONFIG_SERIAL_NONSTANDARD is not set @@ -735,27 +718,11 @@ CONFIG_UNIX98_PTYS=y # CAN, the car bus and industrial fieldbus # # CONFIG_CAN4LINUX is not set - -# -# IPMI -# # CONFIG_IPMI_HANDLER is not set -CONFIG_WATCHDOG=y -# CONFIG_WATCHDOG_NOWAYOUT is not set - -# -# Watchdog Device Drivers -# -# CONFIG_SOFT_WATCHDOG is not set -CONFIG_BFIN_WDT=y CONFIG_HW_RANDOM=y # CONFIG_GEN_RTC is not set # CONFIG_R3964 is not set # CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# # CONFIG_TCG_TPM is not set CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y @@ -777,21 +744,24 @@ CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=50 # CONFIG_I2C_OCORES is not set # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_TAOS_EVM is not set # CONFIG_I2C_STUB is not set +# CONFIG_I2C_TINY_USB is not set # # Miscellaneous I2C Chip support # # CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1374 is not set +# CONFIG_DS1682 is not set # CONFIG_SENSORS_AD5252 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCF8575 is not set -# CONFIG_SENSORS_PCA9543 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set @@ -814,14 +784,11 @@ CONFIG_SPI_BFIN=y # # CONFIG_SPI_AT25 is not set # CONFIG_SPI_SPIDEV is not set - -# -# Dallas's 1-wire bus -# +# CONFIG_SPI_TLE62X0 is not set # CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set -# CONFIG_SENSORS_ABITUGURU is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set @@ -829,12 +796,12 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM1029 is not set # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set -# CONFIG_SENSORS_ASB100 is not set +# CONFIG_SENSORS_ADT7470 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_F71805F is not set -# CONFIG_SENSORS_FSCHER is not set -# CONFIG_SENSORS_FSCPOS is not set +# CONFIG_SENSORS_F71882FG is not set +# CONFIG_SENSORS_F75375S is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set @@ -849,13 +816,16 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LM87 is not set # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_LM93 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_SMSC47M192 is not set # CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_W83781D is not set # CONFIG_SENSORS_W83791D is not set @@ -865,6 +835,25 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_BFIN_WDT=y + +# +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set # # Multifunction device drivers @@ -881,72 +870,133 @@ CONFIG_HWMON=y # # Graphics support # +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Display device support # # CONFIG_DISPLAY_SUPPORT is not set -# CONFIG_VGASTATE is not set -# CONFIG_FB is not set # # Sound # # CONFIG_SOUND is not set - -# -# HID Devices -# +CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HID_DEBUG is not set +# CONFIG_HIDRAW is not set # -# USB support +# USB Input Devices # +CONFIG_USB_HID=y +# CONFIG_USB_HIDINPUT_POWERBOOK is not set +# CONFIG_HID_FF is not set +# CONFIG_USB_HIDDEV is not set +CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y # CONFIG_USB_ARCH_HAS_OHCI is not set # CONFIG_USB_ARCH_HAS_EHCI is not set -# CONFIG_USB is not set +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set + +# +# Miscellaneous USB options +# +# CONFIG_USB_DEVICEFS is not set +CONFIG_USB_DEVICE_CLASS=y +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +CONFIG_USB_OTG_BLACKLIST_HUB=y + +# +# USB Host Controller Drivers +# +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set +CONFIG_USB_MUSB_HDRC=y +CONFIG_USB_MUSB_SOC=y # -# Enable Host or Gadget support to see Inventra options +# Blackfin high speed USB support # +CONFIG_USB_MUSB_HOST=y +# CONFIG_USB_MUSB_PERIPHERAL is not set +# CONFIG_USB_MUSB_OTG is not set +CONFIG_USB_MUSB_HDRC_HCD=y +CONFIG_MUSB_PIO_ONLY=y +CONFIG_USB_MUSB_LOGLEVEL=0 + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # # -# USB Gadget Support +# may also be needed; see USB_STORAGE Help for more information # -# CONFIG_USB_GADGET is not set -# CONFIG_MMC is not set +# CONFIG_USB_LIBUSUAL is not set # -# LED devices +# USB Imaging devices # -# CONFIG_NEW_LEDS is not set +# CONFIG_USB_MDC800 is not set +CONFIG_USB_MON=y # -# LED drivers +# USB port drivers # # -# LED Triggers +# USB Serial Converter support # +# CONFIG_USB_SERIAL is not set # -# InfiniBand support +# USB Miscellaneous drivers # +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGET is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_SISUSBVGA is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set # -# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# USB DSL modem support # # -# Real Time Clock +# USB Gadget Support # +# CONFIG_USB_GADGET is not set +# CONFIG_MMC is not set +# CONFIG_NEW_LEDS is not set CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y CONFIG_RTC_HCTOSYS=y @@ -966,6 +1016,7 @@ CONFIG_RTC_INTF_DEV=y # I2C RTC drivers # # CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set # CONFIG_RTC_DRV_DS1672 is not set # CONFIG_RTC_DRV_MAX6900 is not set # CONFIG_RTC_DRV_RS5C372 is not set @@ -973,6 +1024,7 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_X1205 is not set # CONFIG_RTC_DRV_PCF8563 is not set # CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set # # SPI RTC drivers @@ -984,8 +1036,10 @@ CONFIG_RTC_INTF_DEV=y # Platform RTC drivers # # CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T59 is not set # CONFIG_RTC_DRV_V3020 is not set # @@ -994,22 +1048,9 @@ CONFIG_RTC_INTF_DEV=y CONFIG_RTC_DRV_BFIN=y # -# DMA Engine support -# -# CONFIG_DMA_ENGINE is not set - -# -# DMA Clients +# Userspace I/O # - -# -# DMA Devices -# - -# -# PBX support -# -# CONFIG_PBX is not set +# CONFIG_UIO is not set # # File systems @@ -1054,7 +1095,6 @@ CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y # CONFIG_TMPFS is not set # CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y # CONFIG_CONFIGFS_FS is not set # @@ -1080,10 +1120,12 @@ CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y CONFIG_JFFS2_FS=m CONFIG_JFFS2_FS_DEBUG=0 CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set # CONFIG_JFFS2_SUMMARY is not set # CONFIG_JFFS2_FS_XATTR is not set # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set # CONFIG_CRAMFS is not set @@ -1092,10 +1134,7 @@ CONFIG_JFFS2_RTIME=y # CONFIG_QNX4FS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set - -# -# Network File Systems -# +CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=m CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set @@ -1115,17 +1154,12 @@ CONFIG_SMB_FS=m # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set # # Partition Types # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# CONFIG_NLS=m CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_NLS_CODEPAGE_437 is not set @@ -1166,21 +1200,16 @@ CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set - -# -# Distributed Lock Manager -# # CONFIG_DLM is not set - -# -# Profiling support -# +CONFIG_INSTRUMENTATION=y # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set # # Kernel hacking # # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set @@ -1188,6 +1217,7 @@ CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set # CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_SAMPLES is not set CONFIG_DEBUG_MMRS=y CONFIG_DEBUG_HUNT_FOR_ZERO=y CONFIG_DEBUG_BFIN_HWTRACE_ON=y @@ -1207,11 +1237,8 @@ CONFIG_ACCESS_CHECK=y # CONFIG_KEYS is not set CONFIG_SECURITY=y # CONFIG_SECURITY_NETWORK is not set -CONFIG_SECURITY_CAPABILITIES=m - -# -# Cryptographic options -# +# CONFIG_SECURITY_CAPABILITIES is not set +# CONFIG_SECURITY_ROOTPLUG is not set # CONFIG_CRYPTO is not set # @@ -1222,6 +1249,7 @@ CONFIG_CRC_CCITT=m # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y +# CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=m diff --git a/arch/blackfin/configs/BF548-EZKIT_defconfig b/arch/blackfin/configs/BF548-EZKIT_defconfig index 5bfdfb287d13..1ff2ff4b49aa 100644 --- a/arch/blackfin/configs/BF548-EZKIT_defconfig +++ b/arch/blackfin/configs/BF548-EZKIT_defconfig @@ -1,6 +1,6 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.22.16 +# Linux kernel version: 2.6.24.7 # # CONFIG_MMU is not set # CONFIG_FPU is not set @@ -13,35 +13,34 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_GENERIC_TIME=y CONFIG_GENERIC_GPIO=y CONFIG_FORCE_MAX_ZONEORDER=14 CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # -# Code maturity level options +# General setup # CONFIG_EXPERIMENTAL=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SYSVIPC=y -# CONFIG_IPC_NS is not set CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_UTS_NS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set # CONFIG_AUDIT is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +CONFIG_FAIR_GROUP_SCHED=y +CONFIG_FAIR_USER_SCHED=y +# CONFIG_FAIR_CGROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y # CONFIG_RELAY is not set CONFIG_BLK_DEV_INITRD=y @@ -64,32 +63,24 @@ CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_EVENTFD=y CONFIG_VM_EVENT_COUNTERS=y -CONFIG_BIG_ORDER_ALLOC_NOFAIL_MAGIC=3 -# CONFIG_NP2 is not set CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y CONFIG_TINY_SHMEM=y CONFIG_BASE_SMALL=0 - -# -# Loadable module support -# CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y - -# -# Block layer -# CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set # # IO Schedulers @@ -141,7 +132,6 @@ CONFIG_BF_REV_0_0=y # CONFIG_BF_REV_ANY is not set # CONFIG_BF_REV_NONE is not set CONFIG_BF54x=y -CONFIG_BFIN_SINGLE_CORE=y CONFIG_IRQ_PLL_WAKEUP=7 CONFIG_IRQ_RTC=8 CONFIG_IRQ_SPORT0_RX=9 @@ -169,6 +159,7 @@ CONFIG_IRQ_TIMER8=11 CONFIG_IRQ_TIMER9=11 CONFIG_IRQ_TIMER10=11 CONFIG_BFIN548_EZKIT=y +# CONFIG_BFIN548_BLUETECHNIX_CM is not set # # BF548 Specific Configuration @@ -262,12 +253,14 @@ CONFIG_PINT3_ASSIGN=0x02020303 # Board customizations # # CONFIG_CMDLINE_BOOL is not set +CONFIG_BOOT_LOAD=0x1000 # # Clock/PLL Setup # CONFIG_CLKIN_HZ=25000000 # CONFIG_BFIN_KERNEL_CLOCK is not set +CONFIG_MAX_MEM_SIZE=512 CONFIG_MAX_VCO_HZ=600000000 CONFIG_MIN_VCO_HZ=50000000 CONFIG_MAX_SCLK_HZ=133333333 @@ -281,14 +274,17 @@ CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +# CONFIG_CYCLES_CLOCKSOURCE is not set +# CONFIG_TICK_ONESHOT is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y # -# Memory Setup +# Misc # -CONFIG_MAX_MEM_SIZE=512 -# CONFIG_MEM_MT46V32M16_6T is not set -CONFIG_MEM_MT46V32M16_5B=y -CONFIG_BOOT_LOAD=0x1000 CONFIG_BFIN_SCRATCH_REG_RETN=y # CONFIG_BFIN_SCRATCH_REG_RETE is not set # CONFIG_BFIN_SCRATCH_REG_CYCLES is not set @@ -324,12 +320,14 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 -CONFIG_LARGE_ALLOCS=y +CONFIG_VIRT_TO_BUS=y # CONFIG_BFIN_GPTIMERS is not set CONFIG_BFIN_DMA_5XX=y +# CONFIG_DMA_UNCACHED_4M is not set CONFIG_DMA_UNCACHED_2M=y # CONFIG_DMA_UNCACHED_1M is not set # CONFIG_DMA_UNCACHED_NONE is not set @@ -377,10 +375,6 @@ CONFIG_EBIU_FCTLVAL=0x6 # # CONFIG_PCI is not set # CONFIG_ARCH_SUPPORTS_MSI is not set - -# -# PCCARD (PCMCIA/CardBus) support -# # CONFIG_PCCARD is not set # @@ -396,6 +390,7 @@ CONFIG_BINFMT_ZFLAT=y # Power management options # # CONFIG_PM is not set +CONFIG_SUSPEND_UP_POSSIBLE=y # CONFIG_PM_WAKEUP_BY_GPIO is not set # @@ -439,6 +434,7 @@ CONFIG_SYN_COOKIES=y CONFIG_INET_XFRM_MODE_TRANSPORT=y CONFIG_INET_XFRM_MODE_TUNNEL=y CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set @@ -465,10 +461,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# # CONFIG_NET_SCHED is not set # @@ -488,6 +480,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set # CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set # # Device Drivers @@ -496,14 +489,11 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # Generic Driver Options # +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set # CONFIG_SYS_HYPERVISOR is not set - -# -# Connector - unified userspace <-> kernelspace linker -# # CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set @@ -523,6 +513,7 @@ CONFIG_MTD_BLOCK=y # CONFIG_INFTL is not set # CONFIG_RFD_FTL is not set # CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set # # RAM/ROM/Flash chip drivers @@ -587,39 +578,27 @@ CONFIG_MTD_NAND_BF5XX_HWECC=y # CONFIG_MTD_NAND_DISKONCHIP is not set # CONFIG_MTD_NAND_NANDSIM is not set # CONFIG_MTD_NAND_PLATFORM is not set +# CONFIG_MTD_ALAUDA is not set # CONFIG_MTD_ONENAND is not set # # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set - -# -# Parallel port support -# # CONFIG_PARPORT is not set - -# -# Plug and Play support -# -# CONFIG_PNPACPI is not set - -# -# Block devices -# +CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set # CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_UB is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set - -# -# Misc devices -# +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set # CONFIG_IDE is not set # @@ -627,6 +606,7 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y +CONFIG_SCSI_DMA=y # CONFIG_SCSI_TGT is not set # CONFIG_SCSI_NETLINK is not set CONFIG_SCSI_PROC_FS=y @@ -657,43 +637,35 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SCSI_SPI_ATTRS is not set # CONFIG_SCSI_FC_ATTRS is not set # CONFIG_SCSI_ISCSI_ATTRS is not set -# CONFIG_SCSI_SAS_ATTRS is not set # CONFIG_SCSI_SAS_LIBSAS is not set - -# -# SCSI low-level drivers -# +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_DEBUG is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set # CONFIG_PATA_PLATFORM is not set CONFIG_PATA_BF54X=y -CONFIG_PATA_BF54X_DMA=y - -# -# Multi-device support (RAID and LVM) -# # CONFIG_MD is not set - -# -# Network device support -# CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set +# CONFIG_VETH is not set # CONFIG_PHYLIB is not set - -# -# Ethernet (10 or 100Mbit) -# CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_SMC91X is not set CONFIG_SMSC911X=y # CONFIG_DM9000 is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_B44 is not set CONFIG_NETDEV_1000=y # CONFIG_AX88180 is not set CONFIG_NETDEV_10000=y @@ -703,6 +675,15 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set @@ -710,15 +691,7 @@ CONFIG_NETDEV_10000=y # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# # CONFIG_ISDN is not set - -# -# Telephony Support -# # CONFIG_PHONE is not set # @@ -733,9 +706,6 @@ CONFIG_INPUT=y # # CONFIG_INPUT_MOUSEDEV is not set # CONFIG_INPUT_JOYDEV is not set -CONFIG_INPUT_TSDEV=m -CONFIG_INPUT_TSDEV_SCREEN_X=240 -CONFIG_INPUT_TSDEV_SCREEN_Y=320 CONFIG_INPUT_EVDEV=m CONFIG_INPUT_EVBUG=m @@ -758,6 +728,7 @@ CONFIG_KEYBOARD_BFIN=y CONFIG_INPUT_TOUCHSCREEN=y # CONFIG_TOUCHSCREEN_ADS7846 is not set CONFIG_TOUCHSCREEN_AD7877=m +# CONFIG_TOUCHSCREEN_FUJITSU is not set # CONFIG_TOUCHSCREEN_GUNZE is not set # CONFIG_TOUCHSCREEN_ELO is not set # CONFIG_TOUCHSCREEN_MTOUCH is not set @@ -787,7 +758,6 @@ CONFIG_INPUT_MISC=y # # CONFIG_AD9960 is not set # CONFIG_SPI_ADC_BF533 is not set -# CONFIG_BF5xx_PFLAGS is not set # CONFIG_BF5xx_PPIFCD is not set # CONFIG_BFIN_SIMPLE_TIMER is not set # CONFIG_BF5xx_PPI is not set @@ -796,7 +766,7 @@ CONFIG_BFIN_OTP=y # CONFIG_BFIN_SPORT is not set # CONFIG_BFIN_TIMER_LATENCY is not set # CONFIG_TWI_LCD is not set -# CONFIG_AD5304 is not set +# CONFIG_SIMPLE_GPIO is not set CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y @@ -830,27 +800,11 @@ CONFIG_UNIX98_PTYS=y # CAN, the car bus and industrial fieldbus # # CONFIG_CAN4LINUX is not set - -# -# IPMI -# # CONFIG_IPMI_HANDLER is not set -CONFIG_WATCHDOG=y -# CONFIG_WATCHDOG_NOWAYOUT is not set - -# -# Watchdog Device Drivers -# -# CONFIG_SOFT_WATCHDOG is not set -CONFIG_BFIN_WDT=y CONFIG_HW_RANDOM=y # CONFIG_GEN_RTC is not set # CONFIG_R3964 is not set # CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# # CONFIG_TCG_TPM is not set CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y @@ -872,21 +826,24 @@ CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=50 # CONFIG_I2C_OCORES is not set # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_TAOS_EVM is not set # CONFIG_I2C_STUB is not set +# CONFIG_I2C_TINY_USB is not set # # Miscellaneous I2C Chip support # # CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1374 is not set +# CONFIG_DS1682 is not set # CONFIG_SENSORS_AD5252 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCF8575 is not set -# CONFIG_SENSORS_PCA9543 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set @@ -909,14 +866,11 @@ CONFIG_SPI_BFIN=y # # CONFIG_SPI_AT25 is not set # CONFIG_SPI_SPIDEV is not set - -# -# Dallas's 1-wire bus -# +# CONFIG_SPI_TLE62X0 is not set # CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set -# CONFIG_SENSORS_ABITUGURU is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set @@ -924,12 +878,12 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM1029 is not set # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set -# CONFIG_SENSORS_ASB100 is not set +# CONFIG_SENSORS_ADT7470 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_F71805F is not set -# CONFIG_SENSORS_FSCHER is not set -# CONFIG_SENSORS_FSCPOS is not set +# CONFIG_SENSORS_F71882FG is not set +# CONFIG_SENSORS_F75375S is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set @@ -944,13 +898,16 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LM87 is not set # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_LM93 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_SMSC47M192 is not set # CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_W83781D is not set # CONFIG_SENSORS_W83791D is not set @@ -960,6 +917,25 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_BFIN_WDT=y + +# +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set # # Multifunction device drivers @@ -972,23 +948,20 @@ CONFIG_HWMON=y # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set CONFIG_DAB=y +# CONFIG_USB_DABUSB is not set # # Graphics support # -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set - -# -# Display device support -# -# CONFIG_DISPLAY_SUPPORT is not set # CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set CONFIG_FB=y CONFIG_FIRMWARE_EDID=y # CONFIG_FB_DDC is not set CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set # CONFIG_FB_SYS_FILLRECT is not set # CONFIG_FB_SYS_COPYAREA is not set # CONFIG_FB_SYS_IMAGEBLIT is not set @@ -1003,18 +976,24 @@ CONFIG_FB_DEFERRED_IO=y # # Frame buffer hardware drivers # -# CONFIG_FB_BFIN_7171 is not set -# CONFIG_FB_BFIN_7393 is not set CONFIG_FB_BF54X_LQ043=y # CONFIG_FB_BFIN_T350MCQB is not set +# CONFIG_FB_BFIN_7393 is not set # CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set # # Console display driver support # CONFIG_DUMMY_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set # CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set CONFIG_FONTS=y # CONFIG_FONT_8x8 is not set @@ -1064,11 +1043,22 @@ CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_SERIAL_U16550 is not set # CONFIG_SND_MPU401 is not set +# +# SPI devices +# + # # ALSA Blackfin devices # # CONFIG_SND_BLACKFIN_AD1836 is not set # CONFIG_SND_BFIN_AD73311 is not set +# CONFIG_SND_BFIN_AD73322 is not set + +# +# USB devices +# +# CONFIG_SND_USB_AUDIO is not set +# CONFIG_SND_USB_CAIAQ is not set # # System on Chip audio support @@ -1084,6 +1074,10 @@ CONFIG_SND_BF5XX_SOC_BF548_EZKIT=y CONFIG_SND_BF5XX_SPORT_NUM=0 CONFIG_SND_BF5XX_HAVE_COLD_RESET=y CONFIG_SND_BF5XX_RESET_GPIO_NUM=19 + +# +# SoC Audio support for SuperH +# CONFIG_SND_SOC_AD1980=y # @@ -1091,72 +1085,152 @@ CONFIG_SND_SOC_AD1980=y # # CONFIG_SOUND_PRIME is not set CONFIG_AC97_BUS=y - -# -# HID Devices -# -CONFIG_HID=m +CONFIG_HID_SUPPORT=y +CONFIG_HID=y # CONFIG_HID_DEBUG is not set +# CONFIG_HIDRAW is not set # -# USB support +# USB Input Devices # +CONFIG_USB_HID=y +# CONFIG_USB_HIDINPUT_POWERBOOK is not set +# CONFIG_HID_FF is not set +# CONFIG_USB_HIDDEV is not set +CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y # CONFIG_USB_ARCH_HAS_OHCI is not set # CONFIG_USB_ARCH_HAS_EHCI is not set -# CONFIG_USB is not set +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set + +# +# Miscellaneous USB options +# +# CONFIG_USB_DEVICEFS is not set +CONFIG_USB_DEVICE_CLASS=y +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +CONFIG_USB_OTG_BLACKLIST_HUB=y # -# Enable Host or Gadget support to see Inventra options +# USB Host Controller Drivers # +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set +CONFIG_USB_MUSB_HDRC=y +CONFIG_USB_MUSB_SOC=y + +# +# Blackfin high speed USB support +# +CONFIG_USB_MUSB_HOST=y +# CONFIG_USB_MUSB_PERIPHERAL is not set +# CONFIG_USB_MUSB_OTG is not set +CONFIG_USB_MUSB_HDRC_HCD=y +# CONFIG_MUSB_PIO_ONLY is not set +# CONFIG_USB_INVENTRA_DMA is not set +# CONFIG_USB_TI_CPPI_DMA is not set +CONFIG_USB_MUSB_LOGLEVEL=0 + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # # -# USB Gadget Support +# may also be needed; see USB_STORAGE Help for more information # -# CONFIG_USB_GADGET is not set -CONFIG_MMC=m -# CONFIG_MMC_DEBUG is not set -# CONFIG_MMC_UNSAFE_RESUME is not set +CONFIG_USB_STORAGE=m +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_DPCM is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_LIBUSUAL is not set # -# MMC/SD Card Drivers +# USB Imaging devices # -CONFIG_MMC_BLOCK=m +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set +CONFIG_USB_MON=y # -# MMC/SD Host Controller Drivers +# USB port drivers # -CONFIG_SDH_BFIN=m -# CONFIG_SPI_MMC is not set # -# LED devices +# USB Serial Converter support # -# CONFIG_NEW_LEDS is not set +# CONFIG_USB_SERIAL is not set # -# LED drivers +# USB Miscellaneous drivers # +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGET is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_SISUSBVGA is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set # -# LED Triggers +# USB DSL modem support # # -# InfiniBand support +# USB Gadget Support # +# CONFIG_USB_GADGET is not set +CONFIG_MMC=m +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set # -# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# MMC/SD Card Drivers # +CONFIG_MMC_BLOCK=m +CONFIG_MMC_BLOCK_BOUNCE=y +# CONFIG_SDIO_UART is not set # -# Real Time Clock +# MMC/SD Host Controller Drivers # +CONFIG_SDH_BFIN=m +# CONFIG_SDH_BFIN_MISSING_CMD_PULLUP_WORKAROUND is not set +# CONFIG_MMC_SPI is not set +# CONFIG_SPI_MMC is not set +# CONFIG_NEW_LEDS is not set CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y CONFIG_RTC_HCTOSYS=y @@ -1176,6 +1250,7 @@ CONFIG_RTC_INTF_DEV=y # I2C RTC drivers # # CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set # CONFIG_RTC_DRV_DS1672 is not set # CONFIG_RTC_DRV_MAX6900 is not set # CONFIG_RTC_DRV_RS5C372 is not set @@ -1183,6 +1258,7 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_X1205 is not set # CONFIG_RTC_DRV_PCF8563 is not set # CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set # # SPI RTC drivers @@ -1194,8 +1270,10 @@ CONFIG_RTC_INTF_DEV=y # Platform RTC drivers # # CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T59 is not set # CONFIG_RTC_DRV_V3020 is not set # @@ -1204,22 +1282,9 @@ CONFIG_RTC_INTF_DEV=y CONFIG_RTC_DRV_BFIN=y # -# DMA Engine support -# -# CONFIG_DMA_ENGINE is not set - -# -# DMA Clients +# Userspace I/O # - -# -# DMA Devices -# - -# -# PBX support -# -# CONFIG_PBX is not set +# CONFIG_UIO is not set # # File systems @@ -1280,7 +1345,6 @@ CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y # CONFIG_TMPFS is not set # CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y # CONFIG_CONFIGFS_FS is not set # @@ -1306,10 +1370,12 @@ CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y CONFIG_JFFS2_FS=m CONFIG_JFFS2_FS_DEBUG=0 CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set # CONFIG_JFFS2_SUMMARY is not set # CONFIG_JFFS2_FS_XATTR is not set # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set # CONFIG_CRAMFS is not set @@ -1318,10 +1384,7 @@ CONFIG_JFFS2_RTIME=y # CONFIG_QNX4FS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set - -# -# Network File Systems -# +CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=m CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set @@ -1352,7 +1415,6 @@ CONFIG_CIFS=y # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set # # Partition Types @@ -1375,10 +1437,6 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_KARMA_PARTITION is not set # CONFIG_EFI_PARTITION is not set # CONFIG_SYSV68_PARTITION is not set - -# -# Native Language Support -# CONFIG_NLS=y CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_NLS_CODEPAGE_437=m @@ -1419,21 +1477,16 @@ CONFIG_NLS_ISO8859_15=m CONFIG_NLS_KOI8_R=m CONFIG_NLS_KOI8_U=m CONFIG_NLS_UTF8=m - -# -# Distributed Lock Manager -# # CONFIG_DLM is not set - -# -# Profiling support -# +CONFIG_INSTRUMENTATION=y # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set # # Kernel hacking # # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set @@ -1441,6 +1494,7 @@ CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set # CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_SAMPLES is not set CONFIG_DEBUG_MMRS=y CONFIG_DEBUG_HUNT_FOR_ZERO=y CONFIG_DEBUG_BFIN_HWTRACE_ON=y @@ -1460,11 +1514,8 @@ CONFIG_ACCESS_CHECK=y # CONFIG_KEYS is not set CONFIG_SECURITY=y # CONFIG_SECURITY_NETWORK is not set -CONFIG_SECURITY_CAPABILITIES=m - -# -# Cryptographic options -# +# CONFIG_SECURITY_CAPABILITIES is not set +# CONFIG_SECURITY_ROOTPLUG is not set # CONFIG_CRYPTO is not set # @@ -1475,6 +1526,7 @@ CONFIG_CRC_CCITT=m # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y +# CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=m diff --git a/arch/blackfin/configs/IP0X_defconfig b/arch/blackfin/configs/IP0X_defconfig index 5f6ff04a86c3..4384a670a8b8 100644 --- a/arch/blackfin/configs/IP0X_defconfig +++ b/arch/blackfin/configs/IP0X_defconfig @@ -212,7 +212,7 @@ CONFIG_HZ=250 # # Memory Setup # -CONFIG_MEM_SIZE=64 +CONFIG_MAX_MEM_SIZE=64 CONFIG_MEM_ADD_WIDTH=10 # -- cgit v1.2.3