From dbe675433df3966cb4d24e80670a3134ab8757ee Mon Sep 17 00:00:00 2001 From: Marek Szyprowski Date: Wed, 4 Feb 2015 23:44:15 +0900 Subject: dt-bindings: document a note about power domain subdomains This patch adds a note on defining subdomains to generic PM domain binding documentation to let power domain providers use common approach for defining power domain hierarchy. Signed-off-by: Marek Szyprowski Acked-by: Geert Uytterhoeven Reviewed-by: Ulf Hansson Signed-off-by: Kukjin Kim --- .../devicetree/bindings/power/power_domain.txt | 29 ++++++++++++++++++++++ 1 file changed, 29 insertions(+) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/power/power_domain.txt b/Documentation/devicetree/bindings/power/power_domain.txt index 98c16672ab5f..0f8ed3710c66 100644 --- a/Documentation/devicetree/bindings/power/power_domain.txt +++ b/Documentation/devicetree/bindings/power/power_domain.txt @@ -19,6 +19,16 @@ Required properties: providing multiple PM domains (e.g. power controllers), but can be any value as specified by device tree binding documentation of particular provider. +Optional properties: + - power-domains : A phandle and PM domain specifier as defined by bindings of + the power controller specified by phandle. + Some power domains might be powered from another power domain (or have + other hardware specific dependencies). For representing such dependency + a standard PM domain consumer binding is used. When provided, all domains + created by the given provider should be subdomains of the domain + specified by this binding. More details about power domain specifier are + available in the next section. + Example: power: power-controller@12340000 { @@ -30,6 +40,25 @@ Example: The node above defines a power controller that is a PM domain provider and expects one cell as its phandle argument. +Example 2: + + parent: power-controller@12340000 { + compatible = "foo,power-controller"; + reg = <0x12340000 0x1000>; + #power-domain-cells = <1>; + }; + + child: power-controller@12340000 { + compatible = "foo,power-controller"; + reg = <0x12341000 0x1000>; + power-domains = <&parent 0>; + #power-domain-cells = <1>; + }; + +The nodes above define two power controllers: 'parent' and 'child'. +Domains created by the 'child' power controller are subdomains of '0' power +domain provided by the 'parent' power controller. + ==PM domain consumers== Required properties: -- cgit v1.2.3 From 0f7807518fe172353622700123615ae19701e693 Mon Sep 17 00:00:00 2001 From: Marek Szyprowski Date: Wed, 4 Feb 2015 23:44:15 +0900 Subject: ARM: EXYNOS: add support for sub-power domains This patch adds support for making one power domain a sub-domain of other domain. This is useful for modeling power dependences for devices like TV Mixer or Camera ISP, which needs to have more than one power domain enabled to be operational. Based on previous work by Amit Daniel Kachhap . Signed-off-by: Marek Szyprowski Reviewed-by: Ulf Hansson Signed-off-by: Kukjin Kim --- .../bindings/arm/exynos/power_domain.txt | 2 ++ arch/arm/mach-exynos/pm_domains.c | 28 ++++++++++++++++++++++ 2 files changed, 30 insertions(+) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/arm/exynos/power_domain.txt b/Documentation/devicetree/bindings/arm/exynos/power_domain.txt index f4445e5a2bbb..1e097037349c 100644 --- a/Documentation/devicetree/bindings/arm/exynos/power_domain.txt +++ b/Documentation/devicetree/bindings/arm/exynos/power_domain.txt @@ -22,6 +22,8 @@ Optional Properties: - pclkN, clkN: Pairs of parent of input clock and input clock to the devices in this power domain. Maximum of 4 pairs (N = 0 to 3) are supported currently. +- power-domains: phandle pointing to the parent power domain, for more details + see Documentation/devicetree/bindings/power/power_domain.txt Node of a device using power domains must have a power-domains property defined with a phandle to respective power domain. diff --git a/arch/arm/mach-exynos/pm_domains.c b/arch/arm/mach-exynos/pm_domains.c index 20f267121b3e..37266a826437 100644 --- a/arch/arm/mach-exynos/pm_domains.c +++ b/arch/arm/mach-exynos/pm_domains.c @@ -161,6 +161,34 @@ no_clk: of_genpd_add_provider_simple(np, &pd->pd); } + /* Assign the child power domains to their parents */ + for_each_compatible_node(np, NULL, "samsung,exynos4210-pd") { + struct generic_pm_domain *child_domain, *parent_domain; + struct of_phandle_args args; + + args.np = np; + args.args_count = 0; + child_domain = of_genpd_get_from_provider(&args); + if (!child_domain) + continue; + + if (of_parse_phandle_with_args(np, "power-domains", + "#power-domain-cells", 0, &args) != 0) + continue; + + parent_domain = of_genpd_get_from_provider(&args); + if (!parent_domain) + continue; + + if (pm_genpd_add_subdomain(parent_domain, child_domain)) + pr_warn("%s failed to add subdomain: %s\n", + parent_domain->name, child_domain->name); + else + pr_info("%s has as child subdomain: %s.\n", + parent_domain->name, child_domain->name); + of_node_put(np); + } + return 0; } arch_initcall(exynos4_pm_init_power_domain); -- cgit v1.2.3 From f71b10be4c8a24fcb3d17f3161e31cf09c66ea2f Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Thu, 12 Feb 2015 09:38:40 +0100 Subject: of: Add vendor prefix for Arasan PATA(pata_arasan_cf.c) and SDHCI(sdhci-of-arasan.c) drivers are already using this prefix. Signed-off-by: Michal Simek Signed-off-by: Rob Herring --- Documentation/devicetree/bindings/vendor-prefixes.txt | 1 + 1 file changed, 1 insertion(+) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt index 389ca1347a77..db0e94f26149 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.txt +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt @@ -20,6 +20,7 @@ amlogic Amlogic, Inc. ams AMS AG amstaos AMS-Taos Inc. apm Applied Micro Circuits Corporation (APM) +arasan Arasan Chip Systems arm ARM Ltd. armadeus ARMadeus Systems SARL asahi-kasei Asahi Kasei Corp. -- cgit v1.2.3 From 25e8f336e535d10c30216e1ba330fbea98dfccc5 Mon Sep 17 00:00:00 2001 From: Niklas Cassel Date: Wed, 18 Feb 2015 23:29:38 +0100 Subject: serial: add device tree binding documentation for ETRAX FS UART Signed-off-by: Niklas Cassel Signed-off-by: Rob Herring --- .../devicetree/bindings/serial/axis,etraxfs-uart.txt | 19 +++++++++++++++++++ Documentation/devicetree/bindings/vendor-prefixes.txt | 1 + 2 files changed, 20 insertions(+) create mode 100644 Documentation/devicetree/bindings/serial/axis,etraxfs-uart.txt (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/serial/axis,etraxfs-uart.txt b/Documentation/devicetree/bindings/serial/axis,etraxfs-uart.txt new file mode 100644 index 000000000000..ebcbb62c0a76 --- /dev/null +++ b/Documentation/devicetree/bindings/serial/axis,etraxfs-uart.txt @@ -0,0 +1,19 @@ +ETRAX FS UART + +Required properties: +- compatible : "axis,etraxfs-uart" +- reg: offset and length of the register set for the device. +- interrupts: device interrupt + +Optional properties: +- {dtr,dsr,ri,cd}-gpios: specify a GPIO for DTR/DSR/RI/CD + line respectively. + +Example: + +serial@b00260000 { + compatible = "axis,etraxfs-uart"; + reg = <0xb0026000 0x1000>; + interrupts = <68>; + status = "disabled"; +}; diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt index db0e94f26149..fae26d014aaf 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.txt +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt @@ -28,6 +28,7 @@ atmel Atmel Corporation auo AU Optronics Corporation avago Avago Technologies avic Shanghai AVIC Optoelectronics Co., Ltd. +axis Axis Communications AB bosch Bosch Sensortec GmbH brcm Broadcom Corporation buffalo Buffalo, Inc. -- cgit v1.2.3 From 566084007d3672aebd82a27b448095be67fb208f Mon Sep 17 00:00:00 2001 From: Sylvain Rochet Date: Sun, 18 Jan 2015 14:26:50 +0100 Subject: dts: Documentation: AT91 Watchdog, explain what atmel,idle-halt property really do atmel,idle-halt property should be used with care, it actually makes the watchdog not counting when the CPU is in idle state, therefore the watchdog reset time depends on mean CPU usage and will not reset at all of the CPU stop working while it is in idle state, which is probably not what you want. Signed-off-by: Sylvain Rochet Acked-by: Boris Brezillon Signed-off-by: Nicolas Ferre --- Documentation/devicetree/bindings/watchdog/atmel-wdt.txt | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/watchdog/atmel-wdt.txt b/Documentation/devicetree/bindings/watchdog/atmel-wdt.txt index f90e294d7631..a4d869744f59 100644 --- a/Documentation/devicetree/bindings/watchdog/atmel-wdt.txt +++ b/Documentation/devicetree/bindings/watchdog/atmel-wdt.txt @@ -26,6 +26,11 @@ Optional properties: - atmel,disable : Should be present if you want to disable the watchdog. - atmel,idle-halt : Should be present if you want to stop the watchdog when entering idle state. + CAUTION: This property should be used with care, it actually makes the + watchdog not counting when the CPU is in idle state, therefore the + watchdog reset time depends on mean CPU usage and will not reset at all + if the CPU stop working while it is in idle state, which is probably + not what you want. - atmel,dbg-halt : Should be present if you want to stop the watchdog when entering debug state. -- cgit v1.2.3 From 955ab7e2adc9446257431d7d7ff509bdd1fe5ef8 Mon Sep 17 00:00:00 2001 From: Iyappan Subramanian Date: Tue, 3 Mar 2015 11:39:39 -0800 Subject: Documentation: dts: Update compatible field description for APM X-Gene Signed-off-by: Iyappan Subramanian Signed-off-by: Keyur Chudgar Tested-by: Mark Langsdorf Signed-off-by: David S. Miller --- Documentation/devicetree/bindings/net/apm-xgene-enet.txt | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/net/apm-xgene-enet.txt b/Documentation/devicetree/bindings/net/apm-xgene-enet.txt index cfcc52705ed8..6151999c5dca 100644 --- a/Documentation/devicetree/bindings/net/apm-xgene-enet.txt +++ b/Documentation/devicetree/bindings/net/apm-xgene-enet.txt @@ -4,7 +4,10 @@ Ethernet nodes are defined to describe on-chip ethernet interfaces in APM X-Gene SoC. Required properties for all the ethernet interfaces: -- compatible: Should be "apm,xgene-enet" +- compatible: Should state binding information from the following list, + - "apm,xgene-enet": RGMII based 1G interface + - "apm,xgene1-sgenet": SGMII based 1G interface + - "apm,xgene1-xgenet": XFI based 10G interface - reg: Address and length of the register set for the device. It contains the information of registers in the same order as described by reg-names - reg-names: Should contain the register set names -- cgit v1.2.3 From 20aa4d8ae8d2ada8f959364ebc096b8841245456 Mon Sep 17 00:00:00 2001 From: Chunyan Zhang Date: Fri, 16 Jan 2015 18:00:07 +0800 Subject: Documentation: DT: Renamed of-serial.txt to 8250.txt The file of-serial.txt was only for 8250 compatible UART implementations, so renamed it to 8250.txt to avoid confusing other persons. This is suggested by Arnd, see: http://lists.infradead.org/pipermail/linux-arm-kernel/2014-September/291455.html Signed-off-by: Chunyan Zhang Acked-by: Mark Rutland Signed-off-by: Rob Herring --- Documentation/devicetree/bindings/serial/8250.txt | 66 ++++++++++++++++++++++ .../devicetree/bindings/serial/of-serial.txt | 66 ---------------------- 2 files changed, 66 insertions(+), 66 deletions(-) create mode 100644 Documentation/devicetree/bindings/serial/8250.txt delete mode 100644 Documentation/devicetree/bindings/serial/of-serial.txt (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/serial/8250.txt b/Documentation/devicetree/bindings/serial/8250.txt new file mode 100644 index 000000000000..91d5ab0e60fc --- /dev/null +++ b/Documentation/devicetree/bindings/serial/8250.txt @@ -0,0 +1,66 @@ +* UART (Universal Asynchronous Receiver/Transmitter) + +Required properties: +- compatible : one of: + - "ns8250" + - "ns16450" + - "ns16550a" + - "ns16550" + - "ns16750" + - "ns16850" + - For Tegra20, must contain "nvidia,tegra20-uart" + - For other Tegra, must contain '"nvidia,-uart", + "nvidia,tegra20-uart"' where is tegra30, tegra114, tegra124, + tegra132, or tegra210. + - "nxp,lpc3220-uart" + - "ralink,rt2880-uart" + - "ibm,qpace-nwp-serial" + - "altr,16550-FIFO32" + - "altr,16550-FIFO64" + - "altr,16550-FIFO128" + - "fsl,16550-FIFO64" + - "fsl,ns16550" + - "serial" if the port type is unknown. +- reg : offset and length of the register set for the device. +- interrupts : should contain uart interrupt. +- clock-frequency : the input clock frequency for the UART + or + clocks phandle to refer to the clk used as per Documentation/devicetree + /bindings/clock/clock-bindings.txt + +Optional properties: +- current-speed : the current active speed of the UART. +- reg-offset : offset to apply to the mapbase from the start of the registers. +- reg-shift : quantity to shift the register offsets by. +- reg-io-width : the size (in bytes) of the IO accesses that should be + performed on the device. There are some systems that require 32-bit + accesses to the UART (e.g. TI davinci). +- used-by-rtas : set to indicate that the port is in use by the OpenFirmware + RTAS and should not be registered. +- no-loopback-test: set to indicate that the port does not implements loopback + test mode +- fifo-size: the fifo size of the UART. +- auto-flow-control: one way to enable automatic flow control support. The + driver is allowed to detect support for the capability even without this + property. + +Note: +* fsl,ns16550: + ------------ + Freescale DUART is very similar to the PC16552D (and to a + pair of NS16550A), albeit with some nonstandard behavior such as + erratum A-004737 (relating to incorrect BRK handling). + + Represents a single port that is compatible with the DUART found + on many Freescale chips (examples include mpc8349, mpc8548, + mpc8641d, p4080 and ls2085a). + +Example: + + uart@80230000 { + compatible = "ns8250"; + reg = <0x80230000 0x100>; + clock-frequency = <3686400>; + interrupts = <10>; + reg-shift = <2>; + }; diff --git a/Documentation/devicetree/bindings/serial/of-serial.txt b/Documentation/devicetree/bindings/serial/of-serial.txt deleted file mode 100644 index 91d5ab0e60fc..000000000000 --- a/Documentation/devicetree/bindings/serial/of-serial.txt +++ /dev/null @@ -1,66 +0,0 @@ -* UART (Universal Asynchronous Receiver/Transmitter) - -Required properties: -- compatible : one of: - - "ns8250" - - "ns16450" - - "ns16550a" - - "ns16550" - - "ns16750" - - "ns16850" - - For Tegra20, must contain "nvidia,tegra20-uart" - - For other Tegra, must contain '"nvidia,-uart", - "nvidia,tegra20-uart"' where is tegra30, tegra114, tegra124, - tegra132, or tegra210. - - "nxp,lpc3220-uart" - - "ralink,rt2880-uart" - - "ibm,qpace-nwp-serial" - - "altr,16550-FIFO32" - - "altr,16550-FIFO64" - - "altr,16550-FIFO128" - - "fsl,16550-FIFO64" - - "fsl,ns16550" - - "serial" if the port type is unknown. -- reg : offset and length of the register set for the device. -- interrupts : should contain uart interrupt. -- clock-frequency : the input clock frequency for the UART - or - clocks phandle to refer to the clk used as per Documentation/devicetree - /bindings/clock/clock-bindings.txt - -Optional properties: -- current-speed : the current active speed of the UART. -- reg-offset : offset to apply to the mapbase from the start of the registers. -- reg-shift : quantity to shift the register offsets by. -- reg-io-width : the size (in bytes) of the IO accesses that should be - performed on the device. There are some systems that require 32-bit - accesses to the UART (e.g. TI davinci). -- used-by-rtas : set to indicate that the port is in use by the OpenFirmware - RTAS and should not be registered. -- no-loopback-test: set to indicate that the port does not implements loopback - test mode -- fifo-size: the fifo size of the UART. -- auto-flow-control: one way to enable automatic flow control support. The - driver is allowed to detect support for the capability even without this - property. - -Note: -* fsl,ns16550: - ------------ - Freescale DUART is very similar to the PC16552D (and to a - pair of NS16550A), albeit with some nonstandard behavior such as - erratum A-004737 (relating to incorrect BRK handling). - - Represents a single port that is compatible with the DUART found - on many Freescale chips (examples include mpc8349, mpc8548, - mpc8641d, p4080 and ls2085a). - -Example: - - uart@80230000 { - compatible = "ns8250"; - reg = <0x80230000 0x100>; - clock-frequency = <3686400>; - interrupts = <10>; - reg-shift = <2>; - }; -- cgit v1.2.3 From d1e9fa98387549a24633fb6b00a26edb34382488 Mon Sep 17 00:00:00 2001 From: Matt Porter Date: Thu, 5 Mar 2015 10:53:11 -0500 Subject: dt: submitting-patches: clarify that DT maintainers are to be cced on bindings The exact steps provided for submitting binding patches can be read as requiring the bindings to be sent only to the devicetree@vger.kernel.org list. Since the DT maintainers would like to be Cced on any binding submissions, make this requirement explicit in step 2. Signed-off-by: Matt Porter Signed-off-by: Rob Herring --- Documentation/devicetree/bindings/submitting-patches.txt | 3 +++ 1 file changed, 3 insertions(+) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/submitting-patches.txt b/Documentation/devicetree/bindings/submitting-patches.txt index 56742bc70218..7d44eae7ab0b 100644 --- a/Documentation/devicetree/bindings/submitting-patches.txt +++ b/Documentation/devicetree/bindings/submitting-patches.txt @@ -12,6 +12,9 @@ I. For patch submitters devicetree@vger.kernel.org + and Cc: the DT maintainers. Use scripts/get_maintainer.pl to identify + all of the DT maintainers. + 3) The Documentation/ portion of the patch should come in the series before the code implementing the binding. -- cgit v1.2.3 From 60b3c7ed7197705716f32a34fafb5570cf4f129a Mon Sep 17 00:00:00 2001 From: Fabrice GASNIER Date: Thu, 5 Mar 2015 16:53:54 +0100 Subject: ARM: STi: Add STiH410 SoC support This patch adds support to STiH410 SoC. Please note "st,stih410" is already present in device tree. The problem is that it is missing the entry in the match table, and so the L2 cache and other cpus than 0 don't get initialized. Signed-off-by: Fabrice Gasnier Tested-by: Maxime Coquelin Acked-by: Peter Griffin Acked-by: Lee Jones Signed-off-by: Maxime Coquelin Signed-off-by: Arnd Bergmann --- Documentation/devicetree/bindings/arm/sti.txt | 4 ++++ arch/arm/mach-sti/board-dt.c | 1 + 2 files changed, 5 insertions(+) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/arm/sti.txt b/Documentation/devicetree/bindings/arm/sti.txt index d70ec358736c..8d27f6b084c7 100644 --- a/Documentation/devicetree/bindings/arm/sti.txt +++ b/Documentation/devicetree/bindings/arm/sti.txt @@ -13,6 +13,10 @@ Boards with the ST STiH407 SoC shall have the following properties: Required root node property: compatible = "st,stih407"; +Boards with the ST STiH410 SoC shall have the following properties: +Required root node property: +compatible = "st,stih410"; + Boards with the ST STiH418 SoC shall have the following properties: Required root node property: compatible = "st,stih418"; diff --git a/arch/arm/mach-sti/board-dt.c b/arch/arm/mach-sti/board-dt.c index b067390cef4e..b373acade338 100644 --- a/arch/arm/mach-sti/board-dt.c +++ b/arch/arm/mach-sti/board-dt.c @@ -18,6 +18,7 @@ static const char *stih41x_dt_match[] __initdata = { "st,stih415", "st,stih416", "st,stih407", + "st,stih410", "st,stih418", NULL }; -- cgit v1.2.3