summaryrefslogtreecommitdiff
path: root/drivers/media/dvb-core
AgeCommit message (Collapse)AuthorFilesLines
2015-02-03[media] dvb_net: Convert local hex dump to print_hex_dump_debugJoe Perches1-26/+2
Use the generic facility instead of a home-grown one. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-03[media] dvb_net: Use standard debugging facilitiesJoe Perches1-33/+24
Convert dprintk to netdev_dbg where appropriate. Remove dvb_net_debug module_param. Remove __func__ from output as that can be added by dynamic_debug. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-03[media] dvb_net: Use vsprintf %pM extension to print Ethernet addressesJoe Perches1-5/+2
No need for more macros, so remove them and use the kernel extension. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-25[media] cxusb: Geniatech T230 supportCrazyCat1-0/+1
Geniatech Mygica T230 DVB-T/T2/C USB stick support. Signed-off-by: Evgeny Plehov <EvgenyPlehov@ukr.net> Reviewed-by: Olli Salonen <olli.salonen@iki.fi> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-11Merge tag 'v3.18-rc4' into patchworkMauro Carvalho Chehab1-0/+6
Needed due to some important regression fixes at RC core. * commit 'v3.18-rc4': (587 commits) Linux 3.18-rc4 ARM: dts: zynq: Enable PL clocks for Parallella tiny: rename ENABLE_DEV_COREDUMP to ALLOW_DEV_COREDUMP tiny: reverse logic for DISABLE_DEV_COREDUMP i2c: core: Dispose OF IRQ mapping at client removal time i2c: at91: don't account as iowait i2c: remove FSF address USB: Update default usb-storage delay_use value in kernel-parameters.txt sysfs: driver core: Fix glue dir race condition by gdp_mutex MIPS: Fix build with binutils 2.24.51+ xfs: track bulkstat progress by agino xfs: bulkstat error handling is broken xfs: bulkstat main loop logic is a mess xfs: bulkstat chunk-formatter has issues xfs: bulkstat chunk formatting cursor is broken xfs: bulkstat btree walk doesn't terminate mm: Fix comment before truncate_setsize() USB: cdc-acm: add quirk for control-line state requests tty: Fix pty master poll() after slave closes v2 MIPS: R3000: Fix debug output for Virtual page number ... Conflicts: drivers/media/rc/rc-main.c
2014-11-03[media] dvb-core: set default properties of ISDB-SAkihiro Tsukada1-0/+6
Signed-off-by: Akihiro Tsukada <tskd08@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-03[media] media: dvb_core: replace a magic number by a macroDan Carpenter1-1/+1
It's better to use TS_SC instead of magic number 0xC0. [m.chehab@samsung.com: patch rebased and message rewritten, as this patch conflicted with an already applied patch] Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-03[media] dvb-net: Fix probable mask then right shift defectsJoe Perches1-1/+3
Precedence of & and >> is not the same and is not left to right. shift has higher precedence and should be done after the mask. Add parentheses around the mask. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-09-26[media] dvb_frontend: Fix __user namespaceMauro Carvalho Chehab1-11/+9
As reported by smatch: drivers/media/dvb-core/dvb_frontend.c:1960:45: warning: incorrect type in argument 2 (different address spaces) drivers/media/dvb-core/dvb_frontend.c:1960:45: expected void const [noderef] <asn:1>*from drivers/media/dvb-core/dvb_frontend.c:1960:45: got struct dtv_property *[noderef] <asn:1>props drivers/media/dvb-core/dvb_frontend.c:1992:45: warning: incorrect type in argument 2 (different address spaces) drivers/media/dvb-core/dvb_frontend.c:1992:45: expected void const [noderef] <asn:1>*from drivers/media/dvb-core/dvb_frontend.c:1992:45: got struct dtv_property *[noderef] <asn:1>props drivers/media/dvb-core/dvb_frontend.c:2014:38: warning: incorrect type in argument 1 (different address spaces) drivers/media/dvb-core/dvb_frontend.c:2014:38: expected void [noderef] <asn:1>*to drivers/media/dvb-core/dvb_frontend.c:2014:38: got struct dtv_property *[noderef] <asn:1>props drivers/media/dvb-core/dvb_frontend.c:1946:17: warning: dereference of noderef expression drivers/media/dvb-core/dvb_frontend.c:1947:17: warning: dereference of noderef expression drivers/media/dvb-core/dvb_frontend.c:1951:22: warning: dereference of noderef expression drivers/media/dvb-core/dvb_frontend.c:1951:42: warning: dereference of noderef expression drivers/media/dvb-core/dvb_frontend.c:1954:31: warning: dereference of noderef expression drivers/media/dvb-core/dvb_frontend.c:1960:41: warning: dereference of noderef expression drivers/media/dvb-core/dvb_frontend.c:1960:54: warning: dereference of noderef expression drivers/media/dvb-core/dvb_frontend.c:1965:33: warning: dereference of noderef expression drivers/media/dvb-core/dvb_frontend.c:1978:17: warning: dereference of noderef expression drivers/media/dvb-core/dvb_frontend.c:1979:17: warning: dereference of noderef expression drivers/media/dvb-core/dvb_frontend.c:1983:22: warning: dereference of noderef expression drivers/media/dvb-core/dvb_frontend.c:1983:42: warning: dereference of noderef expression drivers/media/dvb-core/dvb_frontend.c:1986:31: warning: dereference of noderef expression drivers/media/dvb-core/dvb_frontend.c:1992:41: warning: dereference of noderef expression drivers/media/dvb-core/dvb_frontend.c:1992:54: warning: dereference of noderef expression drivers/media/dvb-core/dvb_frontend.c:2007:33: warning: dereference of noderef expression drivers/media/dvb-core/dvb_frontend.c:2014:34: warning: dereference of noderef expression drivers/media/dvb-core/dvb_frontend.c:2014:52: warning: dereference of noderef expression Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-09-23[media] af9035: Add support for IT930x USB bridgeOlli Salonen1-0/+1
Add support for IT930x USB bridge and IT9303 reference design. It is a DVB-T/T2/C tuner with the following components: - IT9303 USB bridge - Si2168-B40 demodulator - Si2147-A30 tuner The IT9303 requires firmware that can be downloaded here: http://trsqr.net/olli/linux/firmwares/it930x/ The Si2168-B40 requires firmware, but the one that is used by PCTV 292e can be used. http://palosaari.fi/linux/v4l-dvb/firmware/Si2168/Si2168-B40/ The Si2147-A30 tuner does not require firmware loading. Signed-off-by: Olli Salonen <olli.salonen@iki.fi> Reviewed-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-09-21Merge remote-tracking branch 'linus/master' into patchworkMauro Carvalho Chehab1-0/+2
There are some patches that depends on media-v3.16-rc6. So, merge back from upstream before applying them. * linus/master: (1123 commits) drm/nouveau: ltc/gf100-: fix cbc issues on certain boards drm/bochs: add missing drm_connector_register call drm/cirrus: add missing drm_connector_register call staging: vt6655: buffer overflow in ioctl USB: storage: Add quirks for Entrega/Xircom USB to SCSI converters USB: storage: Add quirk for Ariston Technologies iConnect USB to SCSI adapter USB: storage: Add quirk for Adaptec USBConnect 2000 USB-to-SCSI Adapter USB: EHCI: unlink QHs even after the controller has stopped [SCSI] fix for bidi use after free [SCSI] fix regression that accidentally disabled block-based tcq [SCSI] libiscsi: fix potential buffer overrun in __iscsi_conn_send_pdu drm/radeon: Fix typo 'addr' -> 'entry' in rs400_gart_set_page drm/nouveau/runpm: fix module unload drm/radeon/px: fix module unload vgaswitcheroo: add vga_switcheroo_fini_domain_pm_ops drm/radeon: don't reset dma on r6xx-evergreen init drm/radeon: don't reset sdma on CIK init drm/radeon: don't reset dma on NI/SI init drm/radeon/dpm: fix resume on mullins drm/radeon: Disable HDP flush before every CS again for < r600 ...
2014-09-08[media] ngene: properly handle __user ptrMauro Carvalho Chehab2-0/+28
Sparse is complaining about ngene's bad usage of a __user ptr: >> drivers/media/pci/ngene/ngene-dvb.c:62:48: sparse: incorrect type in argument 2 (different address spaces) drivers/media/pci/ngene/ngene-dvb.c:62:48: expected unsigned char const [usertype] *buf drivers/media/pci/ngene/ngene-dvb.c:62:48: got char const [noderef] <asn:1>*buf As this is intercepting a .write() file ops, we can't just memcpy. We need to use copy_from_user. Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-09-04[media] af9035: new IDs: add support for PCTV 78e and PCTV 79eMalcolm Priestley1-0/+2
add the following IDs USB_PID_PCTV_78E (0x025a) for PCTV 78e USB_PID_PCTV_79E (0x0262) for PCTV 79e For these it9135 devices. Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Cc: Antti Palosaari <crope@iki.fi> Cc: <stable@vger.kernel.org> # v3.14+ Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-09-03[media] dmxdev: don't use before checking file->private_dataMauro Carvalho Chehab1-2/+1
As reported by smatch: drivers/media/dvb-core/dmxdev.c:1091 dvb_demux_poll() warn: variable dereferenced before check 'dmxdevfilter' (see line 1088) This was introduced by changeset d102cac8097c. We need to test before using it. Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-09-02[media] cxusb: Add support for TechnoTrend TT-connect CT2-4650 CIOlli Salonen1-0/+1
TechnoTrend TT-connect CT2-4650 CI (0b48:3012) is an USB DVB-T2/C tuner with the following components: USB interface: Cypress CY7C68013A-56LTXC Demodulator: Silicon Labs Si2168-A20 Tuner: Silicon Labs Si2158-A20 CI chip: CIMaX SP2HF The firmware for the tuner is the same as for TechnoTrend TT-TVStick CT2-4400. See https://www.mail-archive.com/linux-media@vger.kernel.org/msg76944.html The demodulator needs a firmware that can be extracted from the Windows drivers. File ttConnect4650_64.sys should be extracted from http://www.tt-downloads.de/bda-treiber_4.1.0.4.zip (MD5 sum below). 3464bfc37a47b4032568718bacba23fb ttConnect4650_64.sys Then the firmware can be extracted: dd if=ttConnect4650_64.sys ibs=1 skip=273376 count=6424 of=dvb-demod-si2168-a20-01.fw The SP2 CI module requires a definition of a function cxusb_tt_ct2_4650_ci_ctrl that is passed on to the SP2 driver and called back for CAM operations. [crope@iki.fi: meld USB ID define patch to this] Signed-off-by: Olli Salonen <olli.salonen@iki.fi> Reviewed-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-09-02[media] media: check status of dmxdev->exit in poll functions of demux&dvrChangbing Xiong1-1/+5
when usb-type tuner is pulled out, user applications did not close device's FD, and go on polling the device, we should return POLLERR directly. Signed-off-by: Changbing Xiong <cb.xiong@samsung.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-09-02[media] media: correct return value in dvb_demux_pollChangbing Xiong1-1/+1
Data type of return value is unsigned int, but in function of dvb_demux_poll, when the pointer of dmxdevfilter equals NULL, it will return -EINVAL, which is invalid. Signed-off-by: Changbing Xiong <cb.xiong@samsung.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-08-26[media] dvb_frontend: estimate bandwidth also for DVB-S/S2/TurboMauro Carvalho Chehab1-0/+17
The needed bandwidth can be estimated using the symbol rate and the rolloff factor. This could be useful for the frontend drivers, as they don't need to calculate it themselves. Reported-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-08-21[media] dvb-frontend: add core support for tuner suspend/resumeMauro Carvalho Chehab2-2/+8
While several tuners have some sort of suspend/resume implementation, this is currently mangled with an optional .sleep callback that it is also used to put the device on low power mode. Not all drivers implement it, as returning the driver from low power may require to re-load the firmware, with takes some time. Also, some drivers may delay it. So, the more coherent is to add two new optional callbacks that will let the tuners to directy implement suspend and resume callbacks if they need. Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-08-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds1-1/+2
Pull networking updates from David Miller: "Highlights: 1) Steady transitioning of the BPF instructure to a generic spot so all kernel subsystems can make use of it, from Alexei Starovoitov. 2) SFC driver supports busy polling, from Alexandre Rames. 3) Take advantage of hash table in UDP multicast delivery, from David Held. 4) Lighten locking, in particular by getting rid of the LRU lists, in inet frag handling. From Florian Westphal. 5) Add support for various RFC6458 control messages in SCTP, from Geir Ola Vaagland. 6) Allow to filter bridge forwarding database dumps by device, from Jamal Hadi Salim. 7) virtio-net also now supports busy polling, from Jason Wang. 8) Some low level optimization tweaks in pktgen from Jesper Dangaard Brouer. 9) Add support for ipv6 address generation modes, so that userland can have some input into the process. From Jiri Pirko. 10) Consolidate common TCP connection request code in ipv4 and ipv6, from Octavian Purdila. 11) New ARP packet logger in netfilter, from Pablo Neira Ayuso. 12) Generic resizable RCU hash table, with intial users in netlink and nftables. From Thomas Graf. 13) Maintain a name assignment type so that userspace can see where a network device name came from (enumerated by kernel, assigned explicitly by userspace, etc.) From Tom Gundersen. 14) Automatic flow label generation on transmit in ipv6, from Tom Herbert. 15) New packet timestamping facilities from Willem de Bruijn, meant to assist in measuring latencies going into/out-of the packet scheduler, latency from TCP data transmission to ACK, etc" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1536 commits) cxgb4 : Disable recursive mailbox commands when enabling vi net: reduce USB network driver config options. tg3: Modify tg3_tso_bug() to handle multiple TX rings amd-xgbe: Perform phy connect/disconnect at dev open/stop amd-xgbe: Use dma_set_mask_and_coherent to set DMA mask net: sun4i-emac: fix memory leak on bad packet sctp: fix possible seqlock seadlock in sctp_packet_transmit() Revert "net: phy: Set the driver when registering an MDIO bus device" cxgb4vf: Turn off SGE RX/TX Callback Timers and interrupts in PCI shutdown routine team: Simplify return path of team_newlink bridge: Update outdated comment on promiscuous mode net-timestamp: ACK timestamp for bytestreams net-timestamp: TCP timestamping net-timestamp: SCHED timestamp on entering packet scheduler net-timestamp: add key to disambiguate concurrent datagrams net-timestamp: move timestamp flags out of sk_flags net-timestamp: extend SCM_TIMESTAMPING ancillary data struct cxgb4i : Move stray CPL definitions to cxgb4 driver tcp: reduce spurious retransmits due to transient SACK reneging qlcnic: Initialize dcbnl_ops before register_netdev ...
2014-07-26[media] media: dvb-core add new flag exit flag value for resumeShuah Khan2-0/+3
Some fe drivers will have to do additional initialization in their fe ops.init interfaces when called during resume. Without the additional initialization, fe and tuner driver resume fails. A new fe exit flag value DVB_FE_DEVICE_RESUME is necessary to detect resume case. This patch adds a new define and changes dvb_frontend_resume() to set it prior to calling fe init and tuner init calls and resets it back to DVB_FE_NO_EXIT once fe and tuner init is done. Signed-off-by: Shuah Khan <shuah.kh@samsung.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-07-26[media] media: dvb-core move fe exit flag from fepriv to fe for driver accessShuah Khan2-15/+16
Some fe drivers attempt to access the device for power control from their release routines. When release routines are called after device is disconnected, the attempts fail. fe drivers should avoid accessing the device, from their release interfaces when called from disconnect path. dvb-frontend maintains exit flag to keep track when fe device is disconnected in its private data structures. Export the flag in fe to enable drivers to check the device status from their release interfaces. Signed-off-by: Shuah Khan <shuah.kh@samsung.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-07-26[media] rtl28xxu: add [1b80:d3b0] Sveon STV21Sebastian1-0/+1
Added Sveon STV21 device based on Realtek RTL2832U and FC0013 tuner Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net> Acked-by: Antti Palosaari <crope@iki.fi> Reviewed-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-07-15net: set name_assign_type in alloc_netdev()Tom Gundersen1-1/+2
Extend alloc_netdev{,_mq{,s}}() to take name_assign_type as argument, and convert all users to pass NET_NAME_UNKNOWN. Coccinelle patch: @@ expression sizeof_priv, name, setup, txqs, rxqs, count; @@ ( -alloc_netdev_mqs(sizeof_priv, name, setup, txqs, rxqs) +alloc_netdev_mqs(sizeof_priv, name, NET_NAME_UNKNOWN, setup, txqs, rxqs) | -alloc_netdev_mq(sizeof_priv, name, setup, count) +alloc_netdev_mq(sizeof_priv, name, NET_NAME_UNKNOWN, setup, count) | -alloc_netdev(sizeof_priv, name, setup) +alloc_netdev(sizeof_priv, name, NET_NAME_UNKNOWN, setup) ) v9: move comments here from the wrong commit Signed-off-by: Tom Gundersen <teg@jklm.no> Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-14[media] cxusb: TechnoTrend CT2-4400 USB DVB-T2/C tuner supportOlli Salonen1-0/+1
USB ID 0b48:3014. USB interface: Cypress CY7C68013A-56LTXC Demodulator: Silicon Labs Si2168-30 Tuner: Silicon Labs Si2158-20 Cc: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Olli Salonen <olli.salonen@iki.fi> Reviewed-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Antti Palosaari <crope@iki.fi> Reviewed-by: Michael Ira Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-06-17[media] dvbdev: add a dvb_detach() macroMauro Carvalho Chehab2-4/+8
The dvb_attach() was unbalanced, as there was no dvb_dettach. Ok, on current cases, the dettach is done by dvbdev, but that are some future corner cases where we may need to do this before registering the frontend. So, add a dvb_detach() and use it at dvb_frontend.c. Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-05-25[media] az6027: Added the PID for a new revision of the Elgato EyeTV Sat ↵Manuel Schönlaub1-0/+1
DVB-S Tuner There is another clone of AZ6027. This patch adds the relevant PID. Signed-off-by: Manuel Schönlaub <manuel.schoenlaub@gmail.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-05-13[media] rtl28xxu: add [1b80:d3af] Sveon STV27Alessandro Miceli1-0/+1
Added support for Sveon STV27 device (rtl2832u + FC0013 tuner) Signed-off-by: Alessandro Miceli <angelofsky1980@gmail.com> Signed-off-by: Antti Palosaari <crope@iki.fi> Cc: stable@vger.kernel.org Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-05-13[media] rtl28xxu: add [1b80:d39d] Sveon STV20Alessandro Miceli1-0/+1
Added Sveon STV20 device based on Realtek RTL2832U and FC0012 tuner Signed-off-by: Alessandro Miceli <angelofsky1980@gmail.com> Signed-off-by: Antti Palosaari <crope@iki.fi> Cc: stable@vger.kernel.org Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-03-12[media] dvb_frontend: Fix possible read out of boundsOle Ernst1-4/+4
Check if index is within bounds _before_ accessing the value. Signed-off-by: Ole Ernst <olebowle@gmx.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-03-04[media] dvb_frontend: better handle lna set errorsMauro Carvalho Chehab1-0/+2
If an attempt to set LNA fails, restore the cache to LNA_AUTO, in order to make it to reflect the current LNA status. Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-02-24[media] rtl28xxu: add ID [0ccd:00b4] TerraTec NOXON DAB Stick (rev 3)Till Dörges1-0/+1
I've got the following DAB USB stick that also works fine with the DVB_USB_RTL28XXU driver after I added its USB ID: Bus 001 Device 009: ID 0ccd:00b4 TerraTec Electronic GmbH [crope@iki.fi: apply patch partly manually] Signed-off-by: Till Dörges <till@doerges.net> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-01-31Merge branch 'v4l_for_linus' of ↵Linus Torvalds1-0/+3
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - a new jpeg codec driver for Samsung Exynos (jpeg-hw-exynos4) - a new dvb frontend for ds2103 chipset (m88ds2103) - a new sensor driver for Samsung S5K5BAF UXGA (s5k5baf) - new drivers for R-Car VSP1 - a new radio driver: radio-raremono - a new tuner driver for ts2022 chipset (m88ts2022) - the analog part of em28xx is now a separate module that only load/runs if the device is not a pure digital TV device - added a staging driver for bcm2048 radio devices - the omap 2 video driver (omap24xx) was moved to staging. This driver is for an old hardware and uses a deprecated Kernel internal API. If nobody cares enough to fix it, it would be removed on a couple Kernel releases - the sn9c102 driver was moved to staging. This driver was replaced by gspca, and disabled on some distros, as almost all devices are known to work properly with gspca. It should be removed from kernel on a couple Kernel releases - lots of driver fixes, improvements and cleanups * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (421 commits) [media] media: v4l2-dev: fix video device index assignment [media] rc-core: reuse device numbers [media] em28xx-cards: properly initialize the device bitmap [media] Staging: media: Fix line length exceeding 80 characters in as102_drv.c [media] Staging: media: Fix line length exceeding 80 characters in as102_fe.c [media] Staging: media: Fix quoted string split across line in as102_fe.c [media] media: st-rc: Add reset support [media] m2m-deinterlace: fix allocated struct type [media] radio-usb-si4713: fix sparse non static symbol warnings [media] em28xx-audio: remove needless check before usb_free_coherent() [media] au0828: Fix sparse non static symbol warning Revert "[media] go7007-usb: only use go->dev after allocated" [media] em28xx-audio: provide an error code when URB submit fails [media] em28xx: fix check for audio only usb interfaces when changing the usb alternate setting [media] em28xx: fix usb alternate setting for analog and digital video endpoints > 0 [media] em28xx: make 'em28xx_ctrl_ops' static em28xx-alsa: Fix error patch for init/fini [media] em28xx-audio: flush work at .fini [media] drxk: remove the option to load firmware asynchronously [media] em28xx: adjust period size at runtime ...
2013-12-26media: dvb_core: slight optimization of addr comparedingtianhong1-4/+6
Use possibly more efficient ether_addr_equal instead of memcmp. Cc: Mauro Carvalho Chehab <m.chehab@samsung.com> Cc: linux-media@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-19[media] Add USB IDs for Winfast DTV Dongle Mini-DRobert Backhaus1-0/+1
GIT_AUTHOR_DATE=1386943312 Add USB IDs for the WinFast DTV Dongle Mini. Device is tested and works fine under MythTV Signed-off-by: Robert Backhaus <robbak@robbak.com> Acked-by: Antti Palosaari <crope@iki.fi> Reviewed-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-12-18[media] it913x: Add support for Avermedia H335 id 0x0335Malcolm Priestley1-0/+1
Trivial USB ID addition for Avermedia H335. Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Cc: stable@vger.kernel.org # v3.11+ Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-12-13Merge branch 'upstream-fixes' into patchworkMauro Carvalho Chehab1-1/+6
Merge the media fixes merged upstream for v3.13-rc4 * upstream-fixes: (30 commits) [media] videobuf2-dma-sg: fix possible memory leak [media] vb2: regression fix: always set length field. [media] mt9p031: Include linux/of.h header [media] rtl2830: add parent for I2C adapter [media] media: marvell-ccic: use devm to release clk [media] ths7303: Declare as static a private function [media] em28xx-video: Swap release order to avoid lock nesting [media] usbtv: Add support for PAL video source [media] media_tree: Fix spelling errors [media] videobuf2: Add support for file access mode flags for DMABUF exporting [media] radio-shark2: Mark shark_resume_leds() inline to kill compiler warning [media] radio-shark: Mark shark_resume_leds() inline to kill compiler warning [media] af9035: unlock on error in af9035_i2c_master_xfer() [media] af9033: fix broken I2C [media] v4l: omap3isp: Don't check for missing get_fmt op on remote subdev [media] af9035: fix broken I2C and USB I/O [media] wm8775: fix broken audio routing [media] marvell-ccic: drop resource free in driver remove [media] tef6862/radio-tea5764: actually assign clamp result [media] cx231xx: use after free on error path in probe ...
2013-12-10[media] az6007: support Technisat Cablestar Combo HDCI (minus remote)Roland Scheidegger1-0/+1
This is similar to the Terratec H7. It works with the same az6007 firmware as the former, however the drx-k firmware of the H7 will NOT work. Hence use a different firmware name. The firmware does not need to exist as the one in the eeprom is just fine as long as the h7 one doesn't get loaded, but maybe some day someone wants to load it (the one from the h5 would work too). Also since the config entry is now different anyway disable support for rc. AFAIK the Technisat remote (TS35) is RC5 and the code (which a code comment claims doesn't work anyway) only would handle NEC hence it's pointless creating a device and polling it if we already know it can't work. CI is untested. Originally based on idea found on http://www.linuxtv.org/wiki/index.php/TechniSat_CableStar_Combo_HD_CI claiming only id needs to be added (but failed to mention it only worked because the driver couldn't find the h7 drx-k firmware...). Signed-off-by: Roland Scheidegger <rscheidegger_lists@hispeed.ch> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-12-09[media] media_tree: Fix spelling errorsJonathan McCrohan1-1/+1
Fix various spelling errors in strings and comments throughout the media tree. The majority of these were found using Lucas De Marchi's codespell tool. [m.chehab@samsung.com: discard hunks with conflicts] Signed-off-by: Jonathan McCrohan <jmccrohan@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-11-29[media] media_tree: Fix spelling errorsJonathan McCrohan1-1/+1
Fix various spelling errors in strings and comments throughout the media tree. The majority of these were found using Lucas De Marchi's codespell tool. [m.chehab@samsung.com: discard hunks with conflicts] Signed-off-by: Jonathan McCrohan <jmccrohan@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-11-29[media] dvb_demux: clean up whitespace in comments from previous patch (trivial)Michael Krufky1-2/+2
removes trailing whitespace and rebalance line length in comment block Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-11-29[media] dvb_demux: fix deadlock in dmx_section_feed_release_filter()Alexey Khoroshilov1-1/+6
dmx_section_feed_release_filter() locks dvbdmx->mutex and if the feed is still filtering, it calls feed->stop_filtering(feed). stop_filtering() is implemented by dmx_section_feed_stop_filtering() that first of all try to lock the same mutex: dvbdmx->mutex. That leads to a deadlock. It does not happen often in practice because all callers of release_filter() stop filtering by themselves. So the problem can happen in case of race condition only. The patch releases dvbdmx->mutex before call to feed->stop_filtering(feed) and reacquires the mutex after that. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-11-18Merge branch 'v4l_for_linus' of ↵Linus Torvalds1-6/+11
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: "This series include: - a new Remote Controller driver for ST SoC with the corresponding DT bindings - a new frontend (cx24117) - a new I2C camera flash driver (lm3560) - a new mem2mem driver for TI SoC (ti-vpe) - support for Raphael r828d added to r820t driver - some improvements on buffer allocation at VB2 core - usual driver fixes and improvements PS this time, we have a smaller number of patches. While it is hard to pinpoint to the reasons, I believe that it is mainly due to: 1) there are several patch series ready, but depending on DT review. I decided to grant some extra time for DT maintainers to look on it, as they're expecting to have more time with the changes agreed during ARM mini-summit and KS. If they can't review in time for 3.14, I'll review myself and apply for the next merge window. 2) I suspect that having both LinuxCon EU and LinuxCon NA happening during the same merge window affected the development productivity, as several core media developers participated on both events" * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (151 commits) [media] media: st-rc: Add ST remote control driver [media] gpio-ir-recv: Include linux/of.h header [media] tvp7002: Include linux/of.h header [media] tvp514x: Include linux/of.h header [media] ths8200: Include linux/of.h header [media] adv7343: Include linux/of.h header [media] v4l: Fix typo in v4l2_subdev_get_try_crop() [media] media: i2c: add driver for dual LED Flash, lm3560 [media] rtl28xxu: add 15f4:0131 Astrometa DVB-T2 [media] rtl28xxu: add RTL2832P + R828D support [media] rtl2832: add new tuner R828D [media] r820t: add support for R828D [media] media/i2c: ths8200: fix build failure with gcc 4.5.4 [media] Add support for KWorld UB435-Q V2 [media] staging/media: fix msi3101 build errors [media] ddbridge: Remove casting the return value which is a void pointer [media] ngene: Remove casting the return value which is a void pointer [media] dm1105: remove unneeded not-null test [media] sh_mobile_ceu_camera: remove deprecated IRQF_DISABLED [media] media: rcar_vin: Add preliminary r8a7790 support ...
2013-10-24dmxdev: get rid of pointless clearing ->f_opAl Viro1-4/+0
nobody else will see that struct file after return from ->release() anyway; just leave ->f_op as is and let __fput() do that fops_put(). Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-10-24consolidate the reassignments of ->f_op in ->open() instancesAl Viro1-13/+6
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-10-02[media] media: dvb-core: prepare for enabling irq in complete()Ming Lei1-6/+11
Complete() will be run with interrupt enabled, so change to spin_lock_irqsave(). These functions may be called inside URB->complete(), so use spin_lock_irqsave(). Signed-off-by: Ming Lei <ming.lei@canonical.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-07-22[media] dib0700: add support for PCTV 2002e & PCTV 2002e SEMichael Krufky1-0/+2
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-06-19[media] media: dmxdev: remove dvb_ringbuffer_flush() on writer sideSoeren Moch1-6/+2
In dvb_ringbuffer lock-less synchronizationof reader and writer threads is done with separateread and write pointers. Sincedvb_ringbuffer_flush() modifies the read pointer, this function must not be called from the writer thread. This patch removes the dvb_ringbuffer_flush() calls in the dmxdev ringbuffer write functions, this fixes Oopses "Unable to handle kernel paging request" I could observe for the call chaindvb_demux_read ->dvb_dmxdev_buffer_read -> dvb_ringbuffer_read_user -> __copy_to_user (the reader side of the ringbuffer). The flush calls at the write side are not necessary anyway since ringbuffer_flush is also called in dvb_dmxdev_buffer_read() when an error condition is set in the ringbuffer. This patch should also be applied to stable kernels. Signed-off-by: Soeren Moch <smoch@web.de> CC: <stable@vger.kernel.org> Reviewed-by: Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-06-08[media] Add support for Crypto Redi PC50A device (rtl2832u + FC0012 tuner)Alessandro Miceli1-0/+1
The device has been tested on a MIPSel box with kernel 3.1.1 and backported media_tree drivers The kernel detects the device with the following output: usbcore: registered new interface driver dvb_usb_rtl28xxu usb 1-2: dvb_usb_v2: found a 'Crypto Redi PC50A' in warm state usb 1-2: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer DVB: registering new adapter (Crypto Redi PC50A) usb 1-2: DVB: registering adapter 1 frontend 0 (Realtek RTL2832 (DVB-T))... i2c i2c-4: fc0012: Fitipower FC0012 successfully identified usb 1-2: dvb_usb_v2: 'Crypto Redi PC50A' successfully initialized and connected [crope@iki.fi: fix trivial merge conflict] Signed-off-by: Alessandro Miceli <angelofsky1980@gmail.com> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-06-08[media] Add support for 'Digital Dual TV Receiver CTVDIGDUAL v2Alessandro Miceli1-0/+1
Tested on a MIPSel box with 3.3.6 kernel The kernel output when the device will be detected follows: usbcore: registered new interface driver dvb_usb_it913x it913x: Chip Version=01 Chip Type=9135 it913x: Remote propriety (raw) mode it913x: Dual mode=3 Tuner Type=38 it913x: Chip Version=01 Chip Type=9135 usb 2-1: dvb_usb_v2: found a 'Digital Dual TV Receiver CTVDIGDUAL_V2' in cold state usb 2-1: dvb_usb_v2: downloading firmware from file 'dvb-usb-it9137-01.fw' it913x: FRM Starting Firmware Download it913x: FRM Firmware Download Completed - Resetting Device it913x: Chip Version=01 Chip Type=9135 it913x: Firmware Version 204147968 usb 2-1: dvb_usb_v2: found a 'Digital Dual TV Receiver CTVDIGDUAL_V2' in warm state usb 2-1: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer DVB: registering new adapter (Digital Dual TV Receiver CTVDIGDUAL_V2) it913x-fe: ADF table value :00 it913x-fe: Crystal Frequency :12000000 Adc Frequency :20250000 ADC X2: 00 it913x-fe: Tuner LNA type :38 usb 2-1: DVB: registering adapter 1 frontend 0 (Digital Dual TV Receiver CTVDIGDUAL_V2_1)... usb 2-1: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer DVB: registering new adapter (Digital Dual TV Receiver CTVDIGDUAL_V2) it913x-fe: ADF table value :00 it913x-fe: Crystal Frequency :12000000 Adc Frequency :20250000 ADC X2: 00 it913x-fe: Tuner LNA type :38 usb 2-1: DVB: registering adapter 2 frontend 0 (Digital Dual TV Receiver CTVDIGDUAL_V2_2)... usb 2-1: dvb_usb_v2: 'Digital Dual TV Receiver CTVDIGDUAL_V2' successfully initialized and connected RC part not tested Signed-off-by: Alessandro Miceli <angelofsky1980@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-23 19:38:02 +0000