summaryrefslogtreecommitdiff
path: root/drivers/ieee1394
AgeCommit message (Collapse)AuthorFilesLines
2006-07-03[PATCH] ieee1394: remove unused macros HPSB_PANIC and HPSB_TRACEStefan Richter2-8/+3
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Ben Collins <bcollins@ubuntu.com>
2006-07-03[PATCH] ieee1394: remove redundant code from ieee1394_hotplug.hStefan Richter1-21/+8
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Ben Collins <bcollins@ubuntu.com>
2006-07-03[PATCH] ieee1394: update #include directives in midlayer header filesStefan Richter17-53/+91
Remove unnecessary includes, add missing includes. Use forward type declarations for some structs. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Ben Collins <bcollins@ubuntu.com>
2006-07-03[PATCH] ieee1394: coding style and comment fixes in midlayer header filesStefan Richter11-441/+449
Adjust tabulators, line wraps, empty lines, and comment style. Update comments in ieee1394_transactions.h and highlevel.h. Fix typo in comment in csr.h. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Ben Collins <bcollins@ubuntu.com>
2006-07-03[PATCH] ieee1394: replace __inline__ by inlineStefan Richter3-5/+6
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Ben Collins <bcollins@ubuntu.com>
2006-07-03[PATCH] ieee1394: skip dummy loop in build_speed_mapStefan Richter2-1/+5
The last loop in ieee1394 core's speed calculation is not required unless ieee1394.h::IEEE1394_SPEED_MAX is changed from its current value of 3. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Ben Collins <bcollins@ubuntu.com>
2006-07-03[PATCH] ieee1394: fix calculation of csr->expireStefan Richter1-21/+10
This variant of calculate_expire() is more correct and easier to read. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Ben Collins <bcollins@ubuntu.com>
2006-07-03[PATCH] ieee1394: sbp2: enable auto spin-up for Maxtor disksStefan Richter1-0/+3
At least Maxtor OneTouch III require a "start stop unit" command after auto spin-down before the next access can proceed. This patch activates the responsible code in scsi_mod for all Maxtor SBP-2 disks. https://bugzilla.novell.com/show_bug.cgi?id=183011 Maybe that should be done for all SBP-2 disks, but better be cautious. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Ben Collins <bcollins@ubuntu.com>
2006-07-03[PATCH] ieee1394: fix cosmetic problem in speed probeStefan Richter1-5/+8
If ieee1394.h::IEEE1394_SPEED_MAX is bigger than the actual speed of an 1394b host adapter and the speed to another 1394b node was probed, a bigger speed than actually used was kept in host->speed[n]. The only resulting problem so far was sbp2 displaying bogus values in the syslog, e.g. S3200 for actual S800 connections if IEEE1394_SPEED_MAX was S3200. But other high-level drivers which access this field could get into more trouble. (Eth1394 is the only other in-tree driver which does so. It seems it is not affected.) Nodemgr now clips this value according to the host adapter's link speed. A pointer expression in nodemgr_check_speed is also changed for clarity. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Ben Collins <bcollins@ubuntu.com>
2006-07-02[PATCH] irq-flags: firewire: Use the new IRQF_ constantsThomas Gleixner2-3/+3
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: "David S. Miller" <davem@davemloft.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Jody McIntyre <scjody@modernduck.com> Cc: Ben Collins <bcollins@debian.org> Cc: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-30Remove obsolete #include <linux/config.h>Jörn Engel12-12/+0
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-06-27[PATCH] 64bit Resource: convert a few remaining drivers to use ↵Greg Kroah-Hartman1-1/+1
resource_size_t where needed Based on a patch series originally from Vivek Goyal <vgoyal@in.ibm.com> Cc: Vivek Goyal <vgoyal@in.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-27[PATCH] 64bit resource: fix up printks for resources in misc driversGreg Kroah-Hartman1-7/+8
This is needed if we wish to change the size of the resource structures. Based on an original patch from Vivek Goyal <vgoyal@in.ibm.com> Cc: Vivek Goyal <vgoyal@in.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivialLinus Torvalds2-2/+2
* git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial: typo fixes Clean up 'inline is not at beginning' warnings for usb storage Storage class should be first i386: Trivial typo fixes ixj: make ixj_set_tone_off() static spelling fixes fix paniced->panicked typos Spelling fixes for Documentation/atomic_ops.txt move acknowledgment for Mark Adler to CREDITS remove the bouncing email address of David Campbell
2006-06-26[PATCH] drivers: use list_move()Akinobu Mita2-4/+2
This patch converts the combination of list_del(A) and list_add(A, B) to list_move(A, B) under drivers/. Acked-by: Corey Minyard <minyard@mvista.com> Cc: Ben Collins <bcollins@debian.org> Acked-by: Roland Dreier <rolandd@cisco.com> Cc: Alasdair Kergon <dm-devel@redhat.com> Cc: Gerd Knorr <kraxel@bytesex.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Frank Pavlic <fpavlic@de.ibm.com> Acked-by: Matthew Wilcox <matthew@wil.cx> Cc: Andrew Vasquez <linux-driver@qlogic.com> Cc: Mikael Starvik <starvik@axis.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Signed-off-by: Akinobu Mita <mita@miraclelinux.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26spelling fixesAndreas Mohr2-2/+2
acquired (aquired) contiguous (contigious) successful (succesful, succesfull) surprise (suprise) whether (weather) some other misspellings Signed-off-by: Andreas Mohr <andi@lisas.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-06-25[PATCH] ieee1394: nodemgr: do not peek into struct semaphoreStefan Richter2-2/+5
Also revert patch "frv: ieee1394 is borken on frv", as it no longer is. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Cc: David Howells <dhowells@redhat.com> Cc: Jody McIntyre <scjody@modernduck.com> Cc: Ben Collins <bcollins@ubuntu.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23[PATCH] frv: ieee1394 is borken on frvAl Viro1-1/+1
The ieee1394 assumes it may make direct use of ->count in the semaphore structure. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David Howells <dhowells@redhat.com> Cc: Stefan Richter <stefanr@s5r6.in-berlin.de> Cc: Ben Collins <bcollins@ubuntu.com> Cc: Jody McIntyre <scjody@modernduck.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/bcollins/linux1394-2.6Linus Torvalds18-454/+460
* git://git.kernel.org/pub/scm/linux/kernel/git/bcollins/linux1394-2.6: (28 commits) eth1394: replace __constant_htons by htons ieee1394: adjust code formatting in highlevel.c ieee1394: hl_irqs_lock is taken in hardware interrupt context ieee1394_core: switch to kthread API ieee1394: sbp2: Kconfig fix ieee1394: add preprocessor constant for invalid csr address sbp2: fix deregistration of status fifo address space [PATCH] eth1394: endian fixes Fix broken suspend/resume in ohci1394 sbp2: use __attribute__((packed)) for on-the-wire structures sbp2: provide helptext for CONFIG_IEEE1394_SBP2_PHYS_DMA and mark it experimental Update feature removal of obsolete raw1394 ISO requests. sbp2: fix S800 transfers if phys_dma is off sbp2: remove ohci1394 specific constant ohci1394: make phys_dma parameter read-only ohci1394: set address range properties ieee1394: extend lowlevel API for address range properties sbp2: log number of supported concurrent logins sbp2: remove manipulation of inquiry response ieee1394: save RAM by using a single tlabel for broadcast transactions ...
2006-06-20[SPARC]: Kill __irq_itoa().David S. Miller2-8/+0
This ugly hack was long overdue to die. It was a way to print out Sparc interrupts in a more freindly format, since IRQ numbers were arbitrary opaque 32-bit integers which vectored into PIL levels. These 32-bit integers were not necessarily in the 0-->NR_IRQS range, but the PILs they vectored to were. The idea now is that we will increase NR_IRQS a little bit and use a virtual<-->real IRQ number mapping scheme similar to PowerPC. That makes this IRQ printing hack irrelevant, and furthermore only a handful of drivers actually used __irq_itoa() making it even less useful. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-12eth1394: replace __constant_htons by htonsBen Collins1-12/+11
...and __constant_ntohs, __constant_ntohl, __constant_cpu_to_be32 too where possible. Htons and friends are resolved to constants in these places anyway. Also fix an endianess glitch in a log message, spotted by Alexey Dobriyan. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Ben Collins <bcollins@ubuntu.com>
2006-06-12ieee1394: adjust code formatting in highlevel.cBen Collins1-233/+182
Replace spaces by tabulators, wrap lines at 80 columns, delete some blank lines and superfluous braces. Collapse some if()-within-if() constructs. Replace a literal CSR address by its preprocessor constant. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Ben Collins <bcollins@ubuntu.com>
2006-06-12ieee1394: hl_irqs_lock is taken in hardware interrupt contextBen Collins1-10/+17
ohci1394 and pcilynx call highlevel_host_reset from their hardware interrupt handler (via hpsb_selfid_complete). Therefore all readers and writers of hl_irqs_lock have to disable interrupts. Reported by Jiri Slaby and J. A. Magallon. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Ben Collins <bcollins@ubuntu.com>
2006-06-12ieee1394_core: switch to kthread APIBen Collins1-33/+15
This gets also rid of the MODPOST warning "drivers/ieee1394/ieee1394.o - Section mismatch: reference to .exit.text: from .smp_locks after '' (at offset 0x18)". Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jody McIntyre <scjody@modernduck.com> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Ben Collins <bcollins@ubuntu.com>
2006-06-12ieee1394: sbp2: Kconfig fixBen Collins1-1/+1
We only support x86 and ppc, due to the use of bus_to_virt() and friends. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Ben Collins <bcollins@ubuntu.com>
2006-06-12ieee1394: add preprocessor constant for invalid csr addressBen Collins6-20/+18
Replace occurrences of the magic value ~(u64)0 for invalid CSR address spaces by a named constant for better readability. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Ben Collins <bcollins@ubuntu.com>
2006-06-12sbp2: fix deregistration of status fifo address spaceBen Collins1-2/+2
The proper designator of an invalid CSR address is ~(u64)0, not (u64)0. Use the correct value in initialization and deregistration. Also, scsi_id->sbp2_lun does not need to be initialized twice. (scsi_id was kzalloc'd.) Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Ben Collins <bcollins@ubuntu.com>
2006-06-12[PATCH] eth1394: endian fixesBen Collins1-3/+3
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Ben Collins <bcollins@ubuntu.com>
2006-06-12Fix broken suspend/resume in ohci1394Ben Collins1-0/+3
I've been experimenting to track down the cause of suspend/resume problems on my Compaq Presario X1050 laptop: http://bugzilla.kernel.org/show_bug.cgi?id=6075 Essentially the ACPI Embedded Controller and keyboard controller would get into a bizarre, confused state after resume. I found that unloading the ohci1394 module before suspend and reloading it after resume made the problem go away. Diffing the dmesg output from resume, with and without the module loaded, I found that with the module loaded I was missing these: PM: Writing back config space on device 0000:02:00.0 at offset 1. (Was 2100080, writing 2100007) PM: Writing back config space on device 0000:02:00.0 at offset 3. (Was 0, writing 8008) PM: Writing back config space on device 0000:02:00.0 at offset 4. (Was 0, writing 90200000) PM: Writing back config space on device 0000:02:00.0 at offset 5. (Was 1, writing 2401) PM: Writing back config space on device 0000:02:00.0 at offset f. (Was 20000100, writing 2000010a) The default PCI driver performs the pci_restore_state when no driver is loaded for the device. When the ohci1394 driver is loaded, it is supposed to do this, however it appears not to do so. I created the patch below and tested it, and it appears to resolve the suspend problems I was having with the module loaded. I only added in the pci_save_state and pci_restore_state - however, though I know little of this hardware, surely the driver should really be doing more than this when suspending and resuming? Currently it does almost nothing, what if there are commands in progress, etc? Signed-off-by: Robert Hancock <hancockr@shaw.ca> Cc: Jody McIntyre <scjody@modernduck.com> Cc: Ben Collins <bcollins@debian.org> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Ben Collins <bcollins@ubuntu.com>
2006-06-12sbp2: use __attribute__((packed)) for on-the-wire structuresBen Collins1-9/+9
It seems to have worked without the attribute during all the years just because sizes of all struct members are multiples of 32 bits. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Ben Collins <bcollins@ubuntu.com>
2006-06-12sbp2: provide helptext for CONFIG_IEEE1394_SBP2_PHYS_DMA and mark it ↵Ben Collins1-2/+11
experimental It appears I will not get it fixed overnight. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Ben Collins <bcollins@ubuntu.com>
2006-06-12sbp2: fix S800 transfers if phys_dma is offBen Collins1-4/+14
If sbp2 is forced to move data via ARM handler, the maximum packet size allowed for S800 transfers exceeds ohci1394's buffer size on platforms where PAGE_SIZE is 4096. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Ben Collins <bcollins@ubuntu.com>
2006-06-12sbp2: remove ohci1394 specific constantBen Collins1-1/+1
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Ben Collins <bcollins@ubuntu.com>
2006-06-12ohci1394: make phys_dma parameter read-onlyBen Collins1-1/+1
Being able to switch physical DMA on and off at run time would be a nice feature but a PITA to support by highlevel drivers and userspace apps. Therefore allow it only to be set when the driver is being loaded. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Ben Collins <bcollins@ubuntu.com>
2006-06-12ohci1394: set address range propertiesBen Collins2-1/+20
This patch supplies the API extension introduced by patch "ieee1394: extend lowlevel API for address range properties" with proper addresses. Like in patch ''ohci1394, sbp2: fix "scsi_add_device failed" with PL-3507 based devices'', 1 TeraByte is chosen as physical upper bound. This leaves a window for the middle address range. This choice is only relevant for adapters which actually have a programmable pysical upper bound register. (Only ALi and Fujitsu adapters are known for this. Most adapters have a fixed bound at 4 GB.) The middle address range is suitable for posted writes. AFAIK, PCILynx does not support physical DMA nor posted writes, therefore no equivalent change in the pcilynx driver is necessary. There is also a driver for GP2Lynx, although not in mainline Linux. I assume this hardware does not support these OHCI features either. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Ben Collins <bcollins@ubuntu.com>
2006-06-12ieee1394: extend lowlevel API for address range propertiesBen Collins2-1/+5
Host adapter hardware imposes certain restrictions and features on address ranges. Instead of hard-wire such ranges into the ieee1394 core or even into protocol drivers, let lowlevel drivers specify these ranges via struct hpsb_host. Patch "ohci1394: set address range properties" must be applied too, else hpsb_allocate_and_register_addrspace() won't work properly. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Ben Collins <bcollins@ubuntu.com>
2006-06-12sbp2: log number of supported concurrent loginsBen Collins1-8/+8
Since this is useful information, promote it from a debug macro to a regular log message. The message appears only if the user set exclusive_login=0, therefore won't clutter the logs in normal use. Also update the comment on exclusive_login. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Jody McIntyre <scjody@modernduck.com> Signed-off-by: Ben Collins <bcollins@ubuntu.com>
2006-06-12sbp2: remove manipulation of inquiry responseBen Collins2-37/+2
This code became ineffective a few Linux releases ago and is not required anyway. Note from Christoph Hellwig: scsi_cmnd.request_buffer is always a scatterlist these days. Checking random bites into it and then mangling the data in sbp2_check_sbp2_response will cause really bad memory corruption when you're not lucky enough to have the check not trigger by luck. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Ben Collins <bcollins@ubuntu.com>
2006-06-12ieee1394: save RAM by using a single tlabel for broadcast transactionsBen Collins2-10/+16
Since broadcast transactions are already complete when the request has been sent, the same transaction label can be reused all over again, see IEEE 1394 7.3.2.5 and 6.2.4.3. Therefore we can reduce the footprint of struct hpsb_host by the size of one struct hpsb_tlabel_pool. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Ben Collins <bcollins@ubuntu.com>
2006-06-12ieee1394: support for slow links or slow 1394b phy portsBen Collins5-20/+76
Add support for the following types of hardware: + nodes that have a link speed < PHY speed + 1394b PHYs that are less than S800 capable + 1394b/1394a adapter cable between two 1394b PHYs Also, S1600 and S3200 are now supported if IEEE1394_SPEED_MAX is raised. A probing function is added to nodemgr's config ROM fetching routine which adjusts the allowable speed if an access problem was encountered. Pros and Cons of the approach: + minimum code footprint to support this less widely used hardware + nearly no overhead for unaffected hardware - ineffective before nodemgr began to read the ROM of affected nodes - ineffective if ieee1394 is loaded with disable_nodemgr=1 The speed map CSRs which are published to the bus are not touched by the patch. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Cc: Hakan Ardo <hakan@debian.org> Cc: Calculex <linux@calculex.com> Cc: Robert J. Kosinski <robk@cmcherald.com> Signed-off-by: Ben Collins <bcollins@ubuntu.com>
2006-06-12ieee1394/ohci1394: CycleTooLong interrupt managementBen Collins1-0/+10
This patch modifies the ohci1394.c file to enable and manage the "cycle too long" interrupt. If this interrupt occurs, the "LinkControl.CycleMaster" bit of the host controller is reseted. This implies, that the host controller does not send "cycle start" packet anymore freezing then the isochronous communication. The management of the interrupt added by the patch is that when the interrupt occurs, the OHCI irq handler prints a kernel log warning and then sets the "LinkControl.CycleMaster" bit again resuming the isochronous communication. Signed-off-by: Jean-Baptiste Mur <jeanbaptiste@maunakeatech.com> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Ben Collins <bcollins@ubuntu.com>
2006-06-12raw1394: fix whitespace after x86_64 compat patchBen Collins1-28/+26
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Ben Collins <bcollins@ubuntu.com>
2006-06-12From: Arjan van de Ven <arjan@infradead.org>Ben Collins1-3/+4
Semaphore to mutex conversion. The conversion was generated via scripts, and the result was validated automatically via a script as well. Signed-off-by: Arjan van de Ven <arjan@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Ben Collins <bcollins@debian.org> Cc: Jody McIntyre <scjody@modernduck.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Ben Collins <bcollins@ubuntu.com>
2006-06-12sbp2: make TSB42AA9 workaround specific to Momobay CX-1Ben Collins1-1/+2
The workarounds are not required for DViCO Momobay FX-3A and AFAIR not for Momobay CX-2. These contain an TSB42AA9A but feature the same firmware_revision value as the older DViCO Momobay CX-1. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Ben Collins <bcollins@ubuntu.com>
2006-06-12ohci1394: Remove superfluous call to free_dma_rcv_ctx,Ben Collins1-11/+0
spotted by Adrian Bunk. Also remove some superfluous comments. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Ben Collins <bcollins@ubuntu.com>
2006-06-12ieee1394: speed up of dma_region_sync_for_cpuBen Collins1-9/+9
when attempting to find the 'last' part of the dma region continue the search from where we left off, instead of starting the search over. Signed-off-by: Jim Westfall <jwestfall@surrealistic.net> Signed-off-by: Ben Collins <bcollins@ubuntu.com>
2006-06-12video1394: be quietBen Collins1-8/+8
When working with multiple cameras and intensive applications, our logs get flooded with video1394 information which isn't of much interest. Any objections to demoting these messages to debug messages? Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: Ben Collins <bcollins@ubuntu.com>
2006-06-05[PATCH] sbp2: fix check of return value of ↵Stefan Richter1-1/+1
hpsb_allocate_and_register_addrspace() From: Stefan Richter <stefanr@s5r6.in-berlin.de> I added a failure check in patch "sbp2: variable status FIFO address (fix login timeout)" --- alas for a wrong error value. This is a bug since Linux 2.6.16. Leads to NULL pointer dereference if the call failed, and bogus failure handling if call succeeded. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Cc: <stable@kernel.org> Cc: Ben Collins <bcollins@debian.org> Cc: Jody McIntyre <scjody@modernduck.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-05-17[PATCH] ohci1394, sbp2: fix "scsi_add_device failed" with PL-3507 based devicesStefan Richter2-3/+8
Re-enable posted writes for status FIFO. Besides bringing back a very minor bandwidth tweak from Linux 2.6.15.x and older, this also fixes an interoperability regression since 2.6.16: http://bugzilla.kernel.org/show_bug.cgi?id=6356 (sbp2: scsi_add_device failed. IEEE1394 HD is not working anymore.) Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Tested-by: Vanei Heidemann <linux@javanei.com.br> Tested-by: Martin Putzlocher <mputzi@gmx.de> (chip type unconfirmed) Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-05-17[PATCH] sbp2: add ability to override hardwired blacklistStefan Richter2-11/+19
In case the blacklist with workarounds for device bugs yields a false positive, the module load parameter can now also be used as an override instead of an addition to the blacklist. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-23 04:15:13 +0000