summaryrefslogtreecommitdiff
path: root/drivers/gpio
AgeCommit message (Collapse)AuthorFilesLines
2011-02-11drivers/gpio/pca953x.c: add a mutex to fix race conditionRoland Stigge1-6/+22
Add a mutex to register communication and handling. Without the mutex, GPIOs didn't switch as expected when toggled in a fast sequence of status changes of multiple outputs. Signed-off-by: Roland Stigge <stigge@antcom.de> Acked-by: Eric Miao <eric.y.miao@gmail.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Marc Zyngier <maz@misterjones.org> Cc: Ben Gardner <bgardner@wabtec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-26langwell_gpio: modify EOI handling following change of kernel irq subsystemFeng Tang1-2/+7
Latest kernel has many changes in IRQ subsystem and its interfaces, like adding "irq_eoi" for struct irq_chip, this patch is a follow up change for that. Also remove the unnecessary cast for a "void *". Signed-off-by: Feng Tang <feng.tang@intel.com> Cc: Alek Du <alek.du@intel.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-14Merge branch 'for-next' of ↵Linus Torvalds1-62/+31
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6 * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (59 commits) mfd: ab8500-core chip version cut 2.0 support mfd: Flag WM831x /IRQ as a wake source mfd: Convert WM831x away from legacy I2C PM operations regulator: Support MAX8998/LP3974 DVS-GPIO mfd: Support LP3974 RTC i2c: Convert SCx200 driver from using raw PCI to platform device x86: OLPC: convert olpc-xo1 driver from pci device to platform device mfd: MAX8998/LP3974 hibernation support mfd/ab8500: remove spi support mfd: Remove ARCH_U8500 dependency from AB8500 misc: Make AB8500_PWM driver depend on U8500 due to PWM breakage mfd: Add __devexit annotation for vx855_remove mfd: twl6030 irq_data conversion. gpio: Fix cs5535 printk warnings misc: Fix cs5535 printk warnings mfd: Convert Wolfson MFD drivers to use irq_data accessor function mfd: Convert TWL4030 to new irq_ APIs mfd: Convert tps6586x driver to new irq_ API mfd: Convert tc6393xb driver to new irq_ APIs mfd: Convert t7166xb driver to new irq_ API ...
2011-01-14gpio: timbgpio: Fix up irq_data conversion breakage.Lennert Buytenhek1-3/+3
Commit a1f5f22adc3206c47e70652c12671666c65b579f ("gpio: timbgpio: irq_data conversion") was slightly too enthusiastic in converting timbgpio_irq() over to take an irq_data * argument instead of an unsigned int irq argument, as it is a flow handler, which still take IRQ numbers for now. (And on top of that, it was using the wrong accessors.) This fixes it up, and seems to build without warnings. Signed-off-by: Lennert Buytenhek <buytenh@secretlab.ca> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Richard Röjfors <richard.rojfors@mocean-labs.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-14gpio: Fix cs5535 printk warningsJoe Perches1-2/+1
drivers/gpio/cs5535-gpio.c: In function 'cs5535_gpio_probe': drivers/gpio/cs5535-gpio.c:269: warning: format '%x' expects type 'unsigned int', but argument 3 has type 'resource_size_t' drivers/gpio/cs5535-gpio.c:269: warning: format '%x' expects type 'unsigned int', but argument 4 has type 'resource_size_t' Use vsprintf extension %pR to format resource. Original-patch-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-01-14gpio/misc: Add MODULE_ALIAS entries for CS5535 functionsAndres Salomon1-0/+1
This adds MODULE_ALIAS entries to the various cs5535 subdevice modules; this allows the modules to automatically be loaded when cs5535-mfd loads. Signed-off-by: Andres Salomon <dilinger@queued.net> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-01-14gpio: Convert cs5535 from pci device to platform deviceAndres Salomon1-62/+31
The cs5535-mfd driver now takes care of the PCI BAR handling; this simplifies the gpio driver a lot. Signed-off-by: Andres Salomon <dilinger@queued.net> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-01-13Merge branch 'for-linus' of ↵Linus Torvalds1-0/+24
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: (348 commits) ALSA: hda - Fix NULL-derefence with a single mic in STAC auto-mic detection ALSA: hda - Add missing NID 0x19 fixup for Sony VAIO ALSA: hda - Fix ALC275 enable hardware EQ for SONY VAIO ALSA: oxygen: fix Xonar DG input ALSA: hda - Fix EAPD on Lenovo NB ALC269 to low ALSA: hda - Fix missing EAPD for Acer 4930G ALSA: hda: Disable 4/6 channels on some NVIDIA GPUs. ALSA: hda - Add static_hdmi_pcm option to HDMI codec parser ALSA: hda - Don't refer ELD when unplugged ASoC: tpa6130a2: Fix compiler warning ASoC: tlv320dac33: Add DAPM selection for LOM invert ASoC: DMIC codec: Adding a generic DMIC codec ALSA: snd-usb-us122l: Fix missing NULL checks ALSA: snd-usb-us122l: Fix MIDI output ASoC: soc-cache: Fix invalid memory access during snd_soc_lzo_cache_sync() ASoC: Fix section mismatch in wm8995.c ALSA: oxygen: add S/PDIF source selection for Claro cards ALSA: oxygen: fix CD/MIDI for X-Meridian (2G) ASoC: fix migor audio build ALSA: include delay.h for msleep in Xonar DG support ...
2011-01-13gpio/ml_ioh_gpio: ML7213 GPIO driverTomoya MORINAGA3-0/+362
ML7213 is a companion chip for Intel Atom E6xx series. This driver can be used for OKI SEMICONDUCTOR ML7213 IOH(Input/Output Hub) which is for IVI(In-Vehicle Infotainment) use. This driver can access the IOH's GPIO device. Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Cc: Samuel Ortiz <sameo@linux.intel.com> Cc: Rabin Vincent <rabin.vincent@stericsson.com> Cc: Marc Zyngier <maz@misterjones.org> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-13GPIO_VX855: eliminate kconfig dependency warningRandy Dunlap1-1/+1
Fix kconfig dependency warning to satisfy dependencies: warning: (GPIO_VX855 && GPIOLIB) selects MFD_VX855 which has unmet direct dependencies (MFD_SUPPORT && PCI) Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Daniel Drake <dsd@laptop.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-13GPIO_RDC321X: select MFD_SUPPORT to squelch kconfig warningRandy Dunlap1-0/+1
Fix kconfig dependency warning to satisfy dependencies: warning: (GPIO_RDC321X && PCI && GPIOLIB) selects MFD_RDC321X which has unmet direct dependencies (MFD_SUPPORT && PCI) Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Florian Fainelli <florian@openwrt.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-13gpio: vr41xx_giu: irq_data conversionLennert Buytenhek1-24/+24
Converts irq_chips and flow handlers over to the new struct irq_data based irq_chip functions. Signed-off-by: Lennert Buytenhek <buytenh@secretlab.ca> Cc: Yoichi Yuasa <yuasa@linux-mips.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-13gpio: timbgpio: irq_data conversionLennert Buytenhek1-15/+15
Converts irq_chips and flow handlers over to the new struct irq_data based irq_chip functions. Signed-off-by: Lennert Buytenhek <buytenh@secretlab.ca> Cc: Richard Röjfors <richard.rojfors@mocean-labs.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-13gpio: tc35892-gpio: irq_data conversionLennert Buytenhek1-18/+18
Converts irq_chips and flow handlers over to the new struct irq_data based irq_chip functions. Signed-off-by: Lennert Buytenhek <buytenh@secretlab.ca> Acked-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-13gpio: sx150x: irq_data conversionLennert Buytenhek1-23/+23
Converts irq_chips and flow handlers over to the new struct irq_data based irq_chip functions. Signed-off-by: Lennert Buytenhek <buytenh@secretlab.ca> Cc: Gregory Bean <gbean@codeaurora.org> Tested-by: Rohit Vaswani <rvaswani@codeaurora.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-13gpio: stmpe-gpio: irq_data conversionLennert Buytenhek1-18/+18
Converts irq_chips and flow handlers over to the new struct irq_data based irq_chip functions. Signed-off-by: Lennert Buytenhek <buytenh@secretlab.ca> Acked-by: Rabin Vincent <rabin.vincent@stericsson.com> Cc: Luotao Fu <l.fu@pengutronix.de> Cc: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-13gpio: pl061: irq_data conversionLennert Buytenhek1-14/+14
Converts irq_chips and flow handlers over to the new struct irq_data based irq_chip functions. Signed-off-by: Lennert Buytenhek <buytenh@secretlab.ca> Acked-by: Baruch Siach <baruch@tkos.co.il> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-13gpio: pca953x: irq_data conversionLennert Buytenhek1-19/+19
Converts irq_chips and flow handlers over to the new struct irq_data based irq_chip functions. Signed-off-by: Lennert Buytenhek <buytenh@secretlab.ca> Cc: Alek Du <alek.du@intel.com> Cc: Alan Cox <alan@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-13gpio: max732x: irq_data conversionLennert Buytenhek1-19/+19
Converts irq_chips and flow handlers over to the new struct irq_data based irq_chip functions. Signed-off-by: Lennert Buytenhek <buytenh@secretlab.ca> Acked-by: Marc Zyngier <maz@misterjones.org> Cc: Eric Miao <eric.y.miao@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-13gpio: langwell_gpio: irq_data conversionLennert Buytenhek1-8/+8
Converts irq_chips and flow handlers over to the new struct irq_data based irq_chip functions. Signed-off-by: Lennert Buytenhek <buytenh@secretlab.ca> Cc: Alan Cox <alan@linux.intel.com> Cc: Yin Kangkai <kangkai.yin@intel.com> Cc: Alek Du <alek.du@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-13gpio: adp5588-gpio: irq_data conversionLennert Buytenhek1-19/+20
Converts irq_chips and flow handlers over to the new struct irq_data based irq_chip functions. Signed-off-by: Lennert Buytenhek <buytenh@secretlab.ca> Acked-by: "Hennerich, Michael" <Michael.Hennerich@analog.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-13drivers/gpio/cs5535-gpio.c: add some additional cs5535-specific GPIO ↵Andres Salomon2-1/+53
functionality This adds (well, re-adds actually) handling for events/IRQs through cs5535 GPIOs. In the wild and wooly world of CS5535, setup_event() is for assigning an IRQ to a GPIO filter/event pair, and set_irq() sets up the pair to trigger IRQs. These should really only be used in highly platform-specific drivers (such as OLPC's DCON driver). Sadly, because set_irq() uses MSRs, this causes the driver to become X86-specific. Signed-off-by: Andres Salomon <dilinger@queued.net> Signed-off-by: Daniel Drake <dsd@laptop.org> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-13Merge branch 'topic/asoc' into for-linusTakashi Iwai1-0/+24
2011-01-06Merge branch 'devel-stable' into develRussell King4-394/+394
Conflicts: arch/arm/mach-pxa/clock.c arch/arm/mach-pxa/clock.h
2011-01-03Merge branch 'ux500-core' of ↵Russell King4-394/+394
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into devel-stable
2010-12-23cs5535-gpio: handle GPIO regs where higher (clear) bits are setAndres Salomon1-2/+6
The default for non-READ_BACK GPIO regs is to have the clear bits set; this means that our original errata fix was too simplistic. This changes it to the following behavior: - when setting GPIOs, ignore the higher order bits (they're for clearing, we don't need to care about them). - when clearing GPIOs, keep all the bits, but unset (via XOR) the lower order bit that negates the clear bit that we care about. That is, if we're clearing GPIO 26 (val = 0x04000000), we first XOR what's currently in the register with 0x0400 (GPIO 26's SET bit), and then OR that with the GPIO 26's CLEAR bit. Tested-by: Daniel Drake <dsd@laptop.org> Signed-off-by: Andres Salomon <dilinger@queued.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-12-23cs5535-gpio: don't apply errata #36 to edge detect GPIOsAndres Salomon1-4/+11
The edge detect status GPIOs function differently from the other atomic model CS5536 GPIO registers; writing 1 to the high bits clears the GPIO, but writing 1 to the lower bits also clears the bit. This means that read-modify-write doesn't actually work for it, so don't apply the errata here. If a negative edge status gets lost after resume.. well, we tried our best! Tested-by: Daniel Drake <dsd@laptop.org> Signed-off-by: Andres Salomon <dilinger@queued.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-12-22Merge branch 'for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: mfd: Support additional parent IDs for wm831x mfd: Fix ab8500-core interrupt ffs bit bug mfd: Supply IRQ base for WM832x devices watchdog: Fix null pointer dereference while accessing rdc321x platform_data gpio: Fix null pointer dereference while accessing rdc321x platform_data
2010-12-22gpiolib: gpio_request_one(): add missing gpio_free()Aaro Koskinen1-0/+3
If GPIO request succeeds, but configuration fails, it should be released. Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com> Acked-by: Eric Miao <eric.miao@canonical.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-12-22gpio: Fix null pointer dereference while accessing rdc321x platform_dataFlorian Fainelli1-1/+1
rdc321x-gpio currently fetches its driver specific data by using the platform_device->platform_data pointer, this is wrong because the mfd device which registers our platform_device has been added using mfd_add_device() which sets the platform_device->driver_data pointer instead. Signed-off-by: Florian Fainelli <florian@openwrt.org> CC: stable@kernel.org Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-12-19mfd/tc3589x: rename tc35892 structs/registers to tc359xSundar Iyer1-134/+134
Most of the register layout, client IRQ numbers on the TC35892 is shared also by other variants. Make this generic as tc3589x Acked-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Sundar Iyer <sundar.iyer@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
2010-12-19mfd/tc35892: rename tc35892 core driver to tc3589xSundar Iyer3-5/+5
Rename the tc35892 core/gpio drivers to tc3589x to include new variants in the same mfd core Acked-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Sundar Iyer <sundar.iyer@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
2010-12-19mfd/tc35892: rename tc35892 header to tc3589xSundar Iyer1-1/+1
Rename the header file to include further variants within the same mfd core driver Acked-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Sundar Iyer <sundar.iyer@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
2010-12-13Merge branch 'topic/workq-update' into topic/asocTakashi Iwai1-2/+14
Conflicts: sound/soc/codecs/wm8350.c sound/soc/codecs/wm8753.c sound/soc/sh/fsi.c sound/soc/soc-core.c
2010-12-02cs5535-gpio: apply CS5536 errata workaround for GPIOsAndres Salomon1-2/+14
The AMD Geode CS5536 Companion Device Silicon Revision B1 Specification Update mentions the follow as issue #36: "Atomic write transactions to the atomic GPIO High Bank Feature Bit registers should only affect the bits selected [...]" "after Suspend, an atomic write transaction [...] will clear all non-selected bits of the accessed register." In other words, writing to the high bank for a single GPIO bit will clear every other GPIO bit (but only sometimes after a suspend). The workaround described is obvious and simple; do a read-modify-write. This patch does that, and documents why we're doing it. Signed-off-by: Andres Salomon <dilinger@queued.net> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-26gpiolib: Add WM8958 support to the WM8994 driverMark Brown1-0/+24
Several of the GPIOs on the WM8994 are fixed function on the WM8958 so error out if the user tries to request them with gpiolib. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-10-29gpio: Add VIA VX855 GPIO driverDaniel Drake3-0/+345
This is needed for supporting the upcoming VX855 camera and OLPC DCON drivers, as well as the advanced viafb features on non-OLPC hardware based on this chip. Based on earlier work by Harald Welte. Signed-off-by: Daniel Drake <dsd@laptop.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-10-29gpio: Fix stmpe error pathVasiliy Kulikov1-2/+4
Free allocated memory. Call stmpe_disable() if it was enabled. Signed-off-by: Vasiliy Kulikov <segooon@gmail.com> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-10-29gpio: Handle stmpe-gpio platform data with no gpio baseVirupax Sadashivpetimath1-2/+0
This patch removes the requirement that gpio base be supplied in platform data. Signed-off-by: Virupax Sadashivpetimath <virupax.sadashivpetimath@stericsson.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-10-29gpio: Add bitmask to block requests to unavailable stmpe GPIOsWolfram Sang1-0/+5
GPIOs on these controller are multi-functional. If you decided to use some of them e.g. as input channels for the ADC, you surely don't want those pins to be reassigned as simple GPIOs (which may be triggered even from userspace via 'export'). Same for the touchscreen controller pins. Since knowledge about the hardware is needed to decide which GPIOs to reserve, let this bitmask be inside platform_data and provide some defines to assist potential users. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Rabin Vincent <rabin.vincent@stericsson.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-10-29gpiolib: Hook up WM8994 gpio_to_irq()Mark Brown1-0/+1
Not sure where this went. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-10-27langwell_gpio: add support for whitney pointAlan Cox1-1/+82
In this case the logic is very similar but the IRQs are not exposed and the device is not picked up via PCI Based on a separate internal whitney point driver by Yin Kangkai. Signed-off-by: Alan Cox <alan@linux.intel.com> Cc: Yin Kangkai <kangkai.yin@intel.com> Cc: Alek Du <alek.du@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-27drivers/gpio/langwell_gpio.c: remove semicolons after function definitionsAndrew Morton1-3/+3
Deweird this driver. Cc: Alek Du <alek.du@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-27gpio: add Topcliff PCH GPIO driverTomoya MORINAGA3-0/+321
Topcliff PCH is the platform controller hub that is going to be used in Intel's upcoming general embedded platform. All IO peripherals in Topcliff PCH are actually devices sitting on AMBA bus. Topcliff PCH has GPIO I/F. Using this I/F, it is able to access system devices connected to GPIO. [akpm@linux-foundation.org: ese DEFINE_PCI_DEVICE_TABLE (per Joe Perches)] Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Rabin Vincent <rabin.vincent@stericsson.com> Cc: Samuel Ortiz <sameo@linux.intel.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Tomoya MORINAGA <morinaga526@dsn.okisemi.com> Cc: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-27gpio: adp5588-gpio: support interrupt controllerMichael Hennerich2-21/+263
Implement irq_chip functionality on ADP5588/5587 GPIO expanders. Only level sensitive interrupts are supported. Interrupts provided by this irq_chip must be requested using request_threaded_irq(). Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-27gpio: add support for 74x164 serial-in/parallel-out 8-bit shift registerMiguel Gaio3-0/+191
Add support for generic 74x164 serial-in/parallel-out 8-bits shift register. This driver can be used as a GPIO output expander. [akpm@linux-foundation.org: remove unused local `refresh'] Signed-off-by: Miguel Gaio <miguel.gaio@efixo.com> Signed-off-by: Juhos Gabor <juhosg@openwrt.org> Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-27gpio: timbgpio: use a copy of the IER register to avoid it being trashedTomas Hallenberg1-2/+19
Some versions of the hardware can trash the IER register if simultaneous interrupts occur. This patch works around it by using a local copy of the register and restoring it after every interrupt. Signed-off-by: Tomas Hallenberg <tomas.hallenberg@pelagicore.com> Acked-by: Richard Röjfors <richard.rojfors@pelagicore.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-27gpio: add driver for basic memory-mapped GPIO controllersAnton Vorontsov3-0/+303
The basic GPIO controllers may be found in various on-board FPGA and ASIC solutions that are used to control board's switches, LEDs, chip-selects, Ethernet/USB PHY power, etc. These controllers may not provide any means of pin setup (in/out/open drain). The driver supports: - 8/16/32/64 bits registers; - GPIO controllers with clear/set registers; - GPIO controllers with a single "data" register; - Big endian bits/GPIOs ordering (mostly used on PowerPC). Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: David Brownell <david-b@pacbell.net> Cc: Samuel Ortiz <sameo@linux.intel.com>, Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-26pca953x: pca953x driver fixes for x86 mrstAlek Du1-6/+7
Our Moorestown platform has two max7315 chips which is covered by pca953x i2c gpio driver. A while ago this driver got updated with nested irq thread support, and it broke the compatibity with "request_irq". For example, the gpio_keys.c driver can not work with this driver now. This patch fixes the issue by switching to generic_handle_irq. Also fix the irq_base issue: irq_base == 0 is valid, and a "-1" value should mean invalid. IRQ 0 is not a valid IRQ, irq_base of 0 is valid. Signed-off-by: Alek Du <alek.du@intel.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-25Merge branch 'next-devicetree' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds1-3/+3
* 'next-devicetree' of git://git.secretlab.ca/git/linux-2.6: mtd/m25p80: add support to parse the partitions by OF node of/irq: of_irq.c needs to include linux/irq.h of/mips: Cleanup some include directives/files. of/mips: Add device tree support to MIPS of/flattree: Eliminate need to provide early_init_dt_scan_chosen_arch of/device: Rework to use common platform_device_alloc() for allocating devices of/xsysace: Fix OF probing on little-endian systems of: use __be32 types for big-endian device tree data of/irq: remove references to NO_IRQ in drivers/of/platform.c of/promtree: add package-to-path support to pdt of/promtree: add of_pdt namespace to pdt code of/promtree: no longer call prom_ functions directly; use an ops structure of/promtree: make drivers/of/pdt.c no longer sparc-only sparc: break out some PROM device-tree building code out into drivers/of of/sparc: convert various prom_* functions to use phandle sparc: stop exporting openprom.h header powerpc, of_serial: Endianness issues setting up the serial ports of: MTD: Fix OF probing on little-endian systems of: GPIO: Fix OF probing on little-endian systems
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-28 13:44:52 +0000