diff options
Diffstat (limited to 'drivers/net/ethernet/intel/e1000e/82571.c')
-rw-r--r-- | drivers/net/ethernet/intel/e1000e/82571.c | 57 |
1 files changed, 22 insertions, 35 deletions
diff --git a/drivers/net/ethernet/intel/e1000e/82571.c b/drivers/net/ethernet/intel/e1000e/82571.c index c77d010d5c59..2faffbde179e 100644 --- a/drivers/net/ethernet/intel/e1000e/82571.c +++ b/drivers/net/ethernet/intel/e1000e/82571.c @@ -1,7 +1,7 @@ /******************************************************************************* Intel PRO/1000 Linux driver - Copyright(c) 1999 - 2012 Intel Corporation. + Copyright(c) 1999 - 2013 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, @@ -44,21 +44,6 @@ #include "e1000.h" -#define ID_LED_RESERVED_F746 0xF746 -#define ID_LED_DEFAULT_82573 ((ID_LED_DEF1_DEF2 << 12) | \ - (ID_LED_OFF1_ON2 << 8) | \ - (ID_LED_DEF1_DEF2 << 4) | \ - (ID_LED_DEF1_DEF2)) - -#define E1000_GCR_L1_ACT_WITHOUT_L0S_RX 0x08000000 -#define AN_RETRY_COUNT 5 /* Autoneg Retry Count value */ -#define E1000_BASE1000T_STATUS 10 -#define E1000_IDLE_ERROR_COUNT_MASK 0xFF -#define E1000_RECEIVE_ERROR_COUNTER 21 -#define E1000_RECEIVE_ERROR_MAX 0xFFFF - -#define E1000_NVM_INIT_CTRL2_MNGM 0x6000 /* Manageability Operation Mode mask */ - static s32 e1000_get_phy_id_82571(struct e1000_hw *hw); static s32 e1000_setup_copper_link_82571(struct e1000_hw *hw); static s32 e1000_setup_fiber_serdes_link_82571(struct e1000_hw *hw); @@ -67,9 +52,7 @@ static s32 e1000_write_nvm_eewr_82571(struct e1000_hw *hw, u16 offset, u16 words, u16 *data); static s32 e1000_fix_nvm_checksum_82571(struct e1000_hw *hw); static void e1000_initialize_hw_bits_82571(struct e1000_hw *hw); -static s32 e1000_setup_link_82571(struct e1000_hw *hw); static void e1000_clear_hw_cntrs_82571(struct e1000_hw *hw); -static void e1000_clear_vfta_82571(struct e1000_hw *hw); static bool e1000_check_mng_mode_82574(struct e1000_hw *hw); static s32 e1000_led_on_82574(struct e1000_hw *hw); static void e1000_put_hw_semaphore_82571(struct e1000_hw *hw); @@ -449,13 +432,13 @@ static s32 e1000_get_phy_id_82571(struct e1000_hw *hw) break; case e1000_82574: case e1000_82583: - ret_val = e1e_rphy(hw, PHY_ID1, &phy_id); + ret_val = e1e_rphy(hw, MII_PHYSID1, &phy_id); if (ret_val) return ret_val; phy->id = (u32)(phy_id << 16); udelay(20); - ret_val = e1e_rphy(hw, PHY_ID2, &phy_id); + ret_val = e1e_rphy(hw, MII_PHYSID2, &phy_id); if (ret_val) return ret_val; @@ -556,16 +539,14 @@ static s32 e1000_get_hw_semaphore_82573(struct e1000_hw *hw) s32 i = 0; extcnf_ctrl = er32(EXTCNF_CTRL); - extcnf_ctrl |= E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP; do { + extcnf_ctrl |= E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP; ew32(EXTCNF_CTRL, extcnf_ctrl); extcnf_ctrl = er32(EXTCNF_CTRL); if (extcnf_ctrl & E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP) break; - extcnf_ctrl |= E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP; - usleep_range(2000, 4000); i++; } while (i < MDIO_OWNERSHIP_TIMEOUT); @@ -937,6 +918,8 @@ static s32 e1000_set_d0_lplu_state_82571(struct e1000_hw *hw, bool active) /* When LPLU is enabled, we should disable SmartSpeed */ ret_val = e1e_rphy(hw, IGP01E1000_PHY_PORT_CONFIG, &data); + if (ret_val) + return ret_val; data &= ~IGP01E1000_PSCFR_SMART_SPEED; ret_val = e1e_wphy(hw, IGP01E1000_PHY_PORT_CONFIG, data); if (ret_val) @@ -1329,9 +1312,10 @@ static void e1000_clear_vfta_82571(struct e1000_hw *hw) */ vfta_offset = (hw->mng_cookie.vlan_id >> E1000_VFTA_ENTRY_SHIFT) & - E1000_VFTA_ENTRY_MASK; - vfta_bit_in_reg = 1 << (hw->mng_cookie.vlan_id & - E1000_VFTA_ENTRY_BIT_SHIFT_MASK); + E1000_VFTA_ENTRY_MASK; + vfta_bit_in_reg = + 1 << (hw->mng_cookie.vlan_id & + E1000_VFTA_ENTRY_BIT_SHIFT_MASK); } break; default: @@ -1399,7 +1383,7 @@ bool e1000_check_phy_82574(struct e1000_hw *hw) { u16 status_1kbt = 0; u16 receive_errors = 0; - s32 ret_val = 0; + s32 ret_val; /* Read PHY Receive Error counter first, if its is max - all F's then * read the Base1000T status register If both are max then PHY is hung. @@ -1544,13 +1528,12 @@ static s32 e1000_check_for_serdes_link_82571(struct e1000_hw *hw) ctrl = er32(CTRL); status = er32(STATUS); - rxcw = er32(RXCW); + er32(RXCW); /* SYNCH bit and IV bit are sticky */ udelay(10); rxcw = er32(RXCW); if ((rxcw & E1000_RXCW_SYNCH) && !(rxcw & E1000_RXCW_IV)) { - /* Receiver is synchronized with no invalid bits. */ switch (mac->serdes_link_state) { case e1000_serdes_link_autoneg_complete: @@ -1799,6 +1782,8 @@ static s32 e1000_fix_nvm_checksum_82571(struct e1000_hw *hw) if (ret_val) return ret_val; ret_val = e1000e_update_nvm_checksum(hw); + if (ret_val) + return ret_val; } } @@ -1812,7 +1797,7 @@ static s32 e1000_fix_nvm_checksum_82571(struct e1000_hw *hw) static s32 e1000_read_mac_addr_82571(struct e1000_hw *hw) { if (hw->mac.type == e1000_82571) { - s32 ret_val = 0; + s32 ret_val; /* If there's an alternate MAC address place it in RAR0 * so that it will override the Si installed default perm @@ -1931,7 +1916,7 @@ static const struct e1000_phy_operations e82_phy_ops_igp = { .set_d0_lplu_state = e1000_set_d0_lplu_state_82571, .set_d3_lplu_state = e1000e_set_d3_lplu_state, .write_reg = e1000e_write_phy_reg_igp, - .cfg_on_link_up = NULL, + .cfg_on_link_up = NULL, }; static const struct e1000_phy_operations e82_phy_ops_m88 = { @@ -1940,7 +1925,7 @@ static const struct e1000_phy_operations e82_phy_ops_m88 = { .check_reset_block = e1000e_check_reset_block_generic, .commit = e1000e_phy_sw_reset, .force_speed_duplex = e1000e_phy_force_speed_duplex_m88, - .get_cfg_done = e1000e_get_cfg_done, + .get_cfg_done = e1000e_get_cfg_done_generic, .get_cable_length = e1000e_get_cable_length_m88, .get_info = e1000e_get_phy_info_m88, .read_reg = e1000e_read_phy_reg_m88, @@ -1949,7 +1934,7 @@ static const struct e1000_phy_operations e82_phy_ops_m88 = { .set_d0_lplu_state = e1000_set_d0_lplu_state_82571, .set_d3_lplu_state = e1000e_set_d3_lplu_state, .write_reg = e1000e_write_phy_reg_m88, - .cfg_on_link_up = NULL, + .cfg_on_link_up = NULL, }; static const struct e1000_phy_operations e82_phy_ops_bm = { @@ -1958,7 +1943,7 @@ static const struct e1000_phy_operations e82_phy_ops_bm = { .check_reset_block = e1000e_check_reset_block_generic, .commit = e1000e_phy_sw_reset, .force_speed_duplex = e1000e_phy_force_speed_duplex_m88, - .get_cfg_done = e1000e_get_cfg_done, + .get_cfg_done = e1000e_get_cfg_done_generic, .get_cable_length = e1000e_get_cable_length_m88, .get_info = e1000e_get_phy_info_m88, .read_reg = e1000e_read_phy_reg_bm2, @@ -1967,7 +1952,7 @@ static const struct e1000_phy_operations e82_phy_ops_bm = { .set_d0_lplu_state = e1000_set_d0_lplu_state_82571, .set_d3_lplu_state = e1000e_set_d3_lplu_state, .write_reg = e1000e_write_phy_reg_bm2, - .cfg_on_link_up = NULL, + .cfg_on_link_up = NULL, }; static const struct e1000_nvm_operations e82571_nvm_ops = { @@ -2044,6 +2029,7 @@ const struct e1000_info e1000_82574_info = { | FLAG_HAS_MSIX | FLAG_HAS_JUMBO_FRAMES | FLAG_HAS_WOL + | FLAG_HAS_HW_TIMESTAMP | FLAG_APME_IN_CTRL3 | FLAG_HAS_SMART_POWER_DOWN | FLAG_HAS_AMT @@ -2065,6 +2051,7 @@ const struct e1000_info e1000_82583_info = { .mac = e1000_82583, .flags = FLAG_HAS_HW_VLAN_FILTER | FLAG_HAS_WOL + | FLAG_HAS_HW_TIMESTAMP | FLAG_APME_IN_CTRL3 | FLAG_HAS_SMART_POWER_DOWN | FLAG_HAS_AMT |